| Age | Commit message (Collapse) | Author |
|---|
|
Commit b35108a51cf7 ("jiffies: Define secs_to_jiffies()") introduced
secs_to_jiffies(). As the value here is a multiple of 1000, use
secs_to_jiffies() instead of msecs_to_jiffies() for readability.
Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Commit b35108a51cf7 ("jiffies: Define secs_to_jiffies()") introduced
secs_to_jiffies(). As the value here is a multiple of 1000, use
secs_to_jiffies() instead of msecs_to_jiffies() for readability.
Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Commit b35108a51cf7 ("jiffies: Define secs_to_jiffies()") introduced
secs_to_jiffies(). As the value here is a multiple of 1000, use
secs_to_jiffies() instead of msecs_to_jiffies to avoid the multiplication.
This is converted using scripts/coccinelle/misc/secs_to_jiffies.cocci with
the following Coccinelle rules:
@depends on patch@
expression E;
@@
-msecs_to_jiffies(E * 1000)
+secs_to_jiffies(E)
-msecs_to_jiffies(E * MSEC_PER_SEC)
+secs_to_jiffies(E)
Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Commit b35108a51cf7 ("jiffies: Define secs_to_jiffies()") introduced
secs_to_jiffies(). As the value here is a multiple of 1000, use
secs_to_jiffies() instead of msecs_to_jiffies to avoid the multiplication.
This is converted using scripts/coccinelle/misc/secs_to_jiffies.cocci with
the following Coccinelle rules:
@depends on patch@
expression E;
@@
-msecs_to_jiffies(E * 1000)
+secs_to_jiffies(E)
-msecs_to_jiffies(E * MSEC_PER_SEC)
+secs_to_jiffies(E)
Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Do not set 'HCI_UART_PROTO_READY' before call 'hci_uart_register_dev()'.
Possible race is when someone calls 'hci_tty_uart_close()' after this bit
is set, but 'hci_uart_register_dev()' wasn't done. This leads to access
to uninitialized fields. To fix it let's set this bit after device was
registered (as before patch c411c62cc133) and to fix previous problem let's
add one more bit in addition to 'HCI_UART_PROTO_READY' which allows to
perform power up without original bit set (pls see commit c411c62cc133).
Crash backtrace from syzbot report:
RIP: 0010:skb_queue_empty_lockless include/linux/skbuff.h:1887 [inline]
RIP: 0010:skb_queue_purge_reason+0x6d/0x140 net/core/skbuff.c:3936
Call Trace:
<TASK>
skb_queue_purge include/linux/skbuff.h:3364 [inline]
mrvl_close+0x2f/0x90 drivers/bluetooth/hci_mrvl.c:100
hci_uart_tty_close+0xb6/0x120 drivers/bluetooth/hci_ldisc.c:557
tty_ldisc_close drivers/tty/tty_ldisc.c:455 [inline]
tty_ldisc_kill+0x66/0xc0 drivers/tty/tty_ldisc.c:613
tty_ldisc_release+0xc9/0x120 drivers/tty/tty_ldisc.c:781
tty_release_struct+0x10/0x80 drivers/tty/tty_io.c:1690
tty_release+0x4ef/0x640 drivers/tty/tty_io.c:1861
__fput+0x86/0x2a0 fs/file_table.c:450
task_work_run+0x82/0xb0 kernel/task_work.c:239
resume_user_mode_work include/linux/resume_user_mode.h:50 [inline]
exit_to_user_mode_loop kernel/entry/common.c:114 [inline]
exit_to_user_mode_prepare include/linux/entry-common.h:329 [inline]
__syscall_exit_to_user_mode_work kernel/entry/common.c:207 [inline]
syscall_exit_to_user_mode+0xa3/0x1b0 kernel/entry/common.c:218
do_syscall_64+0x9a/0x190 arch/x86/entry/common.c:89
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Reported-by: syzbot+683f8cb11b94b1824c77@syzkaller.appspotmail.com
Tested-by: syzbot+683f8cb11b94b1824c77@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-bluetooth/d159c57f-8490-4c26-79da-6ad3612c4a14@salutedevices.com/
Fixes: 366ceff495f9 ("Bluetooth: hci_uart: fix race during initialization")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
'hci_register_dev()' calls power up function, which is executed by
kworker - 'hci_power_on()'. This function does access to bluetooth chip
using callbacks from 'hci_ldisc.c', for example 'hci_uart_send_frame()'.
Now 'hci_uart_send_frame()' checks 'HCI_UART_PROTO_READY' bit set, and
if not - it fails. Problem is that 'HCI_UART_PROTO_READY' is set after
'hci_register_dev()', and there is tiny chance that 'hci_power_on()' will
be executed before setting this bit. In that case HCI init logic fails.
Patch moves setting of 'HCI_UART_PROTO_READY' before calling function
'hci_uart_register_dev()'.
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Add DSBR support for Scorpious Peak cores.
Refer commit eb9e749c0182 ("Bluetooth: btintel: Allow configuring drive
strength of BRI") for details about DSBR.
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Output of checkpatch shows warning:
drivers/bluetooth/bfusb.c:368: WARNING: braces {} are not necessary
for single statement blocks
Remove braces for single line statement.
Signed-off-by: Jeremy Clifton <deaner92@yahoo.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
mgmt_start_discovery_complete() and mgmt_stop_discovery_complete() last
uses were removed in 2022 by
commit ec2904c259c5 ("Bluetooth: Remove dead code from hci_request.c")
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
mgmt_pending_find_data() last use was removed in 2021 by
commit 5a7501374664 ("Bluetooth: hci_sync: Convert MGMT_OP_GET_CLOCK_INFO")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Add 13 USB device IDs for Qualcomm WCN785x, and these IDs are
extracted from Windows driver inf file for various types of
WoS (Windows on Snapdragon) laptop.
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Akihiko Odaki says:
====================
virtio_net: Fixes and improvements
Jason Wang recently proposed an improvement to struct
virtio_net_rss_config:
https://lore.kernel.org/CACGkMEud0Ki8p=z299Q7b4qEDONpYDzbVqhHxCNVk_vo-KdP9A@mail.gmail.com
This patch series implements it and also fixes a few minor bugs I found
when writing patches.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
v1: https://lore.kernel.org/20250318-virtio-v1-0-344caf336ddd@daynix.com
====================
Link: https://patch.msgid.link/20250321-virtio-v2-0-33afb8f4640b@daynix.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
virtnet_probe() lacks the code to free rss_hdr in its error path.
Allocate rss_hdr with devres so that it will be automatically freed.
Fixes: 86a48a00efdf ("virtio_net: Support dynamic rss indirection table size")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Link: https://patch.msgid.link/20250321-virtio-v2-4-33afb8f4640b@daynix.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The new RSS configuration structures allow easily constructing data for
VIRTIO_NET_CTRL_MQ_RSS_CONFIG as they strictly follow the order of data
for the command.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Link: https://patch.msgid.link/20250321-virtio-v2-3-33afb8f4640b@daynix.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Mark the fields of struct virtio_net_ctrl_rss as little endian as
they are in struct virtio_net_rss_config, which it follows.
Fixes: c7114b1249fa ("drivers/net/virtio_net: Added basic RSS support.")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Link: https://patch.msgid.link/20250321-virtio-v2-2-33afb8f4640b@daynix.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
struct virtio_net_rss_config was less useful in actual code because of a
flexible array placed in the middle. Add new structures that split it
into two to avoid having a flexible array in the middle.
Suggested-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Link: https://patch.msgid.link/20250321-virtio-v2-1-33afb8f4640b@daynix.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add device of Whale Peak.
Output of sudo lspci -v -s 00:14.7:
00:14.7 Bluetooth: Intel Corporation Device e476
Subsystem: Intel Corporation Device 0011
Flags: bus master, fast devsel, latency 0, IRQ 16, IOMMU group 11
Memory at 11011c30000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [c8] Power Management version 3
Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [40] Express Root Complex Integrated Endpoint, MSI 00
Capabilities: [80] MSI-X: Enable+ Count=32 Masked-
Capabilities: [100] Latency Tolerance Reporting
Kernel driver in use: btintel_pcie
Kernel modules: btintel_pcie
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Add support for Scorpious Peak core.
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Add VID 0489 & PID e10d for Qualcomm WCN785x USB Bluetooth chip.
The information in /sys/kernel/debug/usb/devices about the Bluetooth
device is listed as the below.
T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=03 Dev#= 4 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0489 ProdID=e10d Rev= 0.01
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms
I: If#= 1 Alt= 7 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 65 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 65 Ivl=1ms
Signed-off-by: Dorian Cruveiller <doriancruveiller@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Add the error code to the message "Failed to claim iso
interface". That allows us to know which error case
usb_driver_claim_interface() hit.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
'destroy_workqueue()' already drains the queue before destroying it, so
there is no need to flush it explicitly.
Remove the redundant 'flush_workqueue()' calls.
This was generated with coccinelle:
@@
expression E;
@@
- flush_workqueue(E);
destroy_workqueue(E);
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250324080854.408188-1-nichen@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull MSI irq updates from Thomas Gleixner:
- Switch the MSI descriptor locking to guards
- Replace the broken PCI/TPH implementation, which lacks any form of
serialization against concurrent modifications with a properly
serialized mechanism in the PCI/MSI core code
- Replace the MSI descriptor abuse in the SCSI/UFS Qualcom driver with
dedicated driver internal storage
* tag 'irq-msi-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/msi: Rename msi_[un]lock_descs()
scsi: ufs: qcom: Remove the MSI descriptor abuse
PCI/TPH: Replace the broken MSI-X control word update
PCI/MSI: Provide a sane mechanism for TPH
PCI: hv: Switch MSI descriptor locking to guard()
PCI/MSI: Switch to MSI descriptor locking to guard()
NTB/msi: Switch MSI descriptor locking to lock guard()
soc: ti: ti_sci_inta_msi: Switch MSI descriptor locking to guard()
genirq/msi: Use lock guards for MSI descriptor locking
cleanup: Provide retain_ptr()
genirq/msi: Make a few functions static
|
|
Revert "udp_tunnel: use static call for GRO hooks when possible"
This reverts commit 311b36574ceaccfa3f91b74054a09cd4bb877702.
Revert "udp_tunnel: create a fastpath GRO lookup."
This reverts commit 8d4880db378350f8ed8969feea13bdc164564fc1.
There are multiple small issues with the series. In the interest
of unblocking the merge window let's opt for a revert.
Link: https://lore.kernel.org/cover.1742557254.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Maxime Chevallier says:
====================
net: phy: sfp: Add single-byte SMBus SFP access
This is V4 for the single-byte SMBus support for SFP cages as well as
embedded PHYs accessed over mdio-i2c.
v3: https://lore.kernel.org/20250314162319.516163-1-maxime.chevallier@bootlin.com
v2: https://lore.kernel.org/20250225112043.419189-1-maxime.chevallier@bootlin.com
v1: https://lore.kernel.org/20250223172848.1098621-1-maxime.chevallier@bootlin.com
====================
Link: https://patch.msgid.link/20250322075745.120831-1-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
PHYs that are within copper SFP modules have their MDIO bus accessible
through address 0x56 (usually) on the i2c bus. The MDIO-I2C bridge is
desgned for 16 bits accesses, but we can also perform 8bits accesses by
reading/writing the high and low bytes sequentially.
This commit adds support for this type of accesses, thus supporting
smbus controllers such as the one in the VSC8552.
This was only tested on Copper SFP modules that embed a Marvell 88e1111
PHY.
Tested-by: Sean Anderson <sean.anderson@linux.dev>
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250322075745.120831-3-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The SFP module's eeprom and internals are accessible through an i2c bus.
It is possible that the SFP might be connected to an SMBus-only
controller, such as the one found in some PHY devices in the VSC85xx
family.
Introduce a set of sfp read/write ops that are going to be used if the
i2c bus is only capable of doing smbus byte accesses.
As Single-byte SMBus transaction go against SFF-8472 and breaks the
atomicity for diagnostics data access, hwmon is disabled in the case
of SMBus access.
Moreover, as this may cause other instabilities, print a warning at
probe time to indicate that the setup may be unreliable because of the
hardware design.
As hwmon may be disabled for both broken EEPROM and smbus, the warnings
are udpated accordingly.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250322075745.120831-2-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"A small set of core changes for the interrupt subsystem:
- Expose the MSI message in the existing debug filesystem dump.
That's useful for validation and debugging.
- Small cleanups"
* tag 'irq-core-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq: Make a few functions static
irqdomain: Remove extern from function declarations
genirq/msi: Expose MSI message data in debugfs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2025-03-24
1) Prevent setting high order sequence number bits input in
non-ESN mode. From Leon Romanovsky.
2) Support PMTU handling in tunnel mode for packet offload.
From Leon Romanovsky.
3) Make xfrm_state_lookup_byaddr lockless.
From Florian Westphal.
4) Remove unnecessary NULL check in xfrm_lookup_with_ifid().
From Dan Carpenter.
* tag 'ipsec-next-2025-03-24' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next:
xfrm: Remove unnecessary NULL check in xfrm_lookup_with_ifid()
xfrm: state: make xfrm_state_lookup_byaddr lockless
xfrm: check for PMTU in tunnel mode for packet offload
xfrm: provide common xdo_dev_offload_ok callback implementation
xfrm: rely on XFRM offload
xfrm: simplify SA initialization routine
xfrm: delay initialization of offload path till its actually requested
xfrm: prevent high SEQ input in non-ESN mode
====================
Link: https://patch.msgid.link/20250324061855.4116819-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
They were being truncated, printk has a 1k limit per call
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Also, improve the message in prep_encoded_data() - it now prints
good/bad checksums, and checksum type.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
DTS example in the bindings should be indented with 2- or 4-spaces and
aligned with opening '- |', so correct any differences like 3-spaces or
mixtures 2- and 4-spaces in one binding.
No functional changes here, but saves some comments during reviews of
new patches built on existing code.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Alex Elder <elder@riscstar.com>
Link: https://patch.msgid.link/20250324125222.82057-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
__bch2_read, before calling __bch2_read_extent(), sets bvec_iter.bi_size
to "the size we can read from the current extent" with a swap, and
restores it to "the size for the total read" after the read_extent call
with another swap.
But we neglected to do the restore before the "if (ret) goto err;" -
which is a problem if we're retrying those errors.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We now always set vrr.flipline, vmin, and vmax for all platforms that
support VRR. Therefore, we should set all TRANS_VRR_CTL bits except
VRR_ENABLE. Without this, the readback for these bits will fail because we
only read vrr.flipline, vmin, and vmax if TRANS_VRR_CTL has the
FLIPLINE_EN bit set.
For platforms that always have the VRR Timing Generator enabled,
the FLIPLINE_EN bit is always set in TRANS_VRR_CTL during
intel_transcoder_vrr_enable(). However, for the remaining platforms
(that do not always have the VRR Timing Generator enabled) if a full
modeset doesn't occur and VRR is not enabled, the bit is not set.
This results in a mismatch between the software state and hardware state
because the software state expects VRR timings like flipline, vmin, and
vmax to be set, but the readout for these doesn't happen since the
FLIPLINE_EN bit is not set in TRANS_VRR_CTL.
To avoid this mismatch, write trans_vrr_ctl in
intel_vrr_set_transcoder_timings() even when VRR is not enabled
for platforms that do not have the VRR Timing Generator always enabled.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20250324133248.4071909-15-ankit.k.nautiyal@intel.com
|
|
Currently, the VRR timing generator is used only when VRR is enabled by
userspace for sinks that support VRR. Starting with PTL+, gradually move
away from the legacy timing generator and use the VRR timing generator
for both variable and fixed timings.
Note: For platforms where we always enable the VRR timing generator,
the LRR fastset is not allowed to avoid live programming of vrr.guardband
with VRR TG enabled. This effectively breaks the LRR fastset functionality
for these platforms and needs to be addressed.
v2: Use this for PTL for now to avoid losing LRR fastset for older
platforms. (Ville)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20250324133248.4071909-14-ankit.k.nautiyal@intel.com
|
|
VRR with joiner is currently disabled as it still needs some work to
correctly sequence the primary and secondary transcoders. However, we can
still use VRR Timing generator in fixed refresh rate for joiner and since
it just need to program vrr timings once and does not involve changing
timings on the fly. We still need to skip the VRR and LRR for joiner.
To achieve this set vrr.in_range to 0 for joiner case, so that we do not
try VRR and LRR for the joiner case.
v2: Avoid checks for secondary pipes, where not required. (Ville)
v3: Remove a redundant check and reset vrr.in_range to false. (Ville)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20250324133248.4071909-13-ankit.k.nautiyal@intel.com
|
|
Since the vrr.guardband can now change for platforms that always use the
VRR Timing Generator, and it is unsafe to reprogram the guardband on the
fly, move the guardband and pipeline_full checks from the pure !fastboot
path and add a check for intel_vrr_always_use_vrr_tg().
For older platforms the vrr.guardband change happens when VRR Timing
generator is off. For the platforms that always use the VRR Timing
Generator, this will prevent reprogramming the vrr.guardband without a
full modeset. However, this will disrupt LRR functionality for these
platforms.
v2: Modify the check to avoid breaking the LRR on older platform.
(Ville)
v3: Correct the oversight of not removing the lines from the original
location. (Ville)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20250324133248.4071909-12-ankit.k.nautiyal@intel.com
|
|
Update the intel_set_transcoder_timings_lrr() function to use
fixed refresh rate timings.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20250324133248.4071909-11-ankit.k.nautiyal@intel.com
|
|
For fixed refresh rate use fixed timings for all platforms that support
VRR. For this add checks to avoid computing and reading VRR for
platforms that do not support VRR.
v2: Avoid touching check for VRR_CTL_FLIP_LINE_EN. (Ville)
v3: Avoid redundant statements in vrr_{compute/get}_config. (Ville)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20250324133248.4071909-10-ankit.k.nautiyal@intel.com
|
|
During modeset enable sequence, program the fixed timings, and turn on the
VRR Timing Generator (VRR TG) for platforms that always use VRR TG.
For this intel_vrr_set_transcoder now always programs fixed timings.
Later if vrr timings are required, vrr_enable() will switch
to the real VRR timings.
For platforms that will always use VRR TG, the VRR_CTL Enable bit is set
and reset in the transcoder enable/disable path.
v2: Update intel_vrr_set_transcoder_timings for fixed_rr.
v3: Update intel_set_transcoder_timings_lrr for fixed_rr. (Ville)
v4: Have separate functions to enable/disable VRR CTL
v5:
-For platforms that do not always have VRRTG on, do write bits other
than enable bit and also use write the TRANS_VRR_PUSH register. (Ville)
-Avoid writing trans_ctl_vrr if !vrr_possible().
v6:
-Disable VRR just before intel_ddi_disable_transcoder_func(). (Ville)
-Correct the sequence of configuring PUSH and VRR Enable/Disable. (Ville)
v7: Reset trans_vrr_ctl to 0 unconditionally in
intel_vrr_transcoder_disable(). (Ville)
v8: Reset trans_vrr_ctl if flipline is not set. (Ville)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20250324133248.4071909-9-ankit.k.nautiyal@intel.com
|
|
For platforms that enable VRR TG only for variable timings, the
VRR_CTL.VRR_ENABLE bit indicates VRR is active. For platforms that
always have VRR TG enabled, the VRR_CTL.VRR_ENABLE bit indicates VRR
is active only when not in fixed refresh rate mode.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20250324133248.4071909-8-ankit.k.nautiyal@intel.com
|
|
For platforms for which vrr timing generator is always set, VRR_CTL
enable bit does not need to toggle, so modify the vrr_{enable/disable}
for this.
At the moment the helper intel_vrr_always_use_vrr_tg() return false for
all cases. This will be set later when all other bits are in place.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20250324133248.4071909-7-ankit.k.nautiyal@intel.com
|
|
LRR and Vmax can be computed only if VRR is supported and vrr.in_range
is set. Currently we proceed with vrr timings only for VRR supporting
panels and return otherwise. For using VRR TG with fix timings, need to
continue even for panels that do not support VRR.
To achieve this, refactor the condition for computing vmax and
update_lrr so that we can continue for fixed timings for panels that do
not support VRR.
v2: Set vmax = vmin for non VRR panels. (Ville)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20250324133248.4071909-6-ankit.k.nautiyal@intel.com
|
|
In intel_post_plane_update() there are things which might need to do
vblank waits, so enabling PSR as early as we do now is simply
counter-productive. Therefore move intel_psr_post_plane_update() at the
last of intel_post_plane_update().
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://lore.kernel.org/r/20250324133248.4071909-5-ankit.k.nautiyal@intel.com
|
|
As per bspec 49268: Disable PSR before disabling VRR.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20250324133248.4071909-4-ankit.k.nautiyal@intel.com
|
|
Currently the variable timings are supported only for DP and eDP and not
for DP MST. Call intel_vrr_compute_config() for MST which will configure
fixed refresh rate timings irrespective of whether VRR is supported or
not. Since vrr_capable still doesn't have support for DP MST this will be
just treated as non VRR case and vrr.vmin/vmax/flipline will be all set
to adjusted_mode->crtc_vtotal.
This will help to move away from the legacy timing generator and
always use VRR timing generator by default.
With this change, we need to exclude MST in intel_vrr_is_capable for
now, to avoid having LRR with MST.
v2: Exclude MST in intel_vrr_is_capable() for now. (Ville)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20250324133248.4071909-3-ankit.k.nautiyal@intel.com
|
|
Currently VRR is not supported with HDMI, but we can still leverage
the VRR Timing Generator to achieve a fixed refresh rate.
Call intel_vrr_compute_config() for HDMI which will handle the vrr
timings to have fixed refresh rate with VRR Timing Generator.
v2: Improve commit message. (Ville).
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com> (#v1)
Link: https://lore.kernel.org/r/20250324133248.4071909-2-ankit.k.nautiyal@intel.com
|
|
If we're moving an extent that was partially overwritten,
bch2_write_rechecksum() will trim it to the currenty live range.
If we then also want to compress it, it'll be decrypted - but the nonce
has been advanced for the overwritten start of the extent that we
dropped, and we were using the nonce we calculated before rechecksum().
Reported-by: Gabriel de Perthuis <g2p.code@gmail.com>
Fixes: 127d90d2823e ("bcachefs: bch2_write_prep_encoded_data() now returns errcode")
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following batch contains Netfilter updates for net-next:
1) Use kvmalloc in xt_hashlimit, from Denis Kirjanov.
2) Tighten nf_conntrack sysctl accepted values for nf_conntrack_max
and nf_ct_expect_max, from Nicolas Bouchinet.
3) Avoid lookup in nft_fib if socket is available, from Florian Westphal.
4) Initialize struct lsm_context in nfnetlink_queue to avoid
hypothetical ENOMEM errors, Chenyuan Yang.
5) Use strscpy() instead of _pad when initializing xtables table name,
kzalloc is already used to initialized the table memory area.
From Thorsten Blum.
6) Missing socket lookup by conntrack information for IPv6 traffic
in nft_socket, there is a similar chunk in IPv4, this was never
added when IPv6 NAT was introduced. From Maxim Mikityanskiy.
7) Fix clang issues with nf_tables CONFIG_MITIGATION_RETPOLINE,
from WangYuli.
* tag 'nf-next-25-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: nf_tables: Only use nf_skip_indirect_calls() when MITIGATION_RETPOLINE
netfilter: socket: Lookup orig tuple for IPv6 SNAT
netfilter: xtables: Use strscpy() instead of strscpy_pad()
netfilter: nfnetlink_queue: Initialize ctx to avoid memory allocation error
netfilter: fib: avoid lookup if socket is available
netfilter: conntrack: Bound nf_conntrack sysctl writes
netfilter: xt_hashlimit: replace vmalloc calls with kvmalloc
====================
Link: https://patch.msgid.link/20250323100922.59983-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This fixes the following build warning:
```
drivers/net/ethernet/amd/au1000_eth.c:574:6: warning: no previous prototype for 'au1000_ReleaseDB' [-Wmissing-prototypes]
574 | void au1000_ReleaseDB(struct au1000_private *aup, struct db_dest *pDB)
| ^~~~~~~~~~~~~~~~
```
Signed-off-by: Johan Korsnes <johan.korsnes@gmail.com>
Cc: Andrew Lunn <andrew+netdev@lunn.ch>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20250323190450.111241-1-johan.korsnes@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
RFS is using two kinds of hash tables.
First one is controlled by /proc/sys/net/core/rps_sock_flow_entries = 2^N
and using the N low order bits of the l4 hash is good enough.
Then each RX queue has its own hash table, controlled by
/sys/class/net/eth1/queues/rx-$q/rps_flow_cnt = 2^X
Current hash function, using the X low order bits is suboptimal,
because RSS is usually using Func(hash) = (hash % power_of_two);
For example, with 32 RX queues, 6 low order bits have no entropy
for a given queue.
Switch this hash function to hash_32(hash, log) to increase
chances to use all possible slots and reduce collisions.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Tom Herbert <tom@herbertland.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250321171309.634100-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
