| Age | Commit message (Collapse) | Author |
|---|
|
Use the common dp link power up/down helpers to avoid duplicating code.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250318063452.4983-2-andyshrk@163.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
The helper functions drm_dp_link_power_up/down were moved to Tegra
DRM in commit 9a42c7c647a9 ("drm/tegra: Move drm_dp_link helpers to Tegra DRM")".
Now since more and more users are duplicating the same code in their
own drivers, it's time to make them as DRM DP common helpers again.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250318063452.4983-1-andyshrk@163.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
When CONFIG_XARRAY_MULTI is not set, reading from a bcachefs file hits
the 'BUG_ON(order > 0);' in xas_set_order(), because it tries to insert
a large folio in the page cache. Fix this by making bcachefs select
XARRAY_MULTI.
Fixes: be212d86b19c ("bcachefs: bs > ps support")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
All the fastpaths that need device usage don't need the sector totals or
fragmentation, just bucket counts.
Split bch_dev_usage up into two different versions, the normal one with
just bucket counts.
This is also a stack usage improvement, since we have a bch_dev_usage on
the stack in the allocation path.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This was planned to be done ages ago, now finally completed; there are
places where we have quite a few btree_trans objects on the stack, so
this reduces stack usage somewhat.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Reducing stack frame usage; this moves the printbuf out of the main
stack frame.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We now have separate per device io_refs for read and write access.
This fixes a device removal bug where the discard workers were still
running while we're removing alloc info for that device.
It's also a bit of hardening; we no longer allow writes to devices that
are read-only.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Commit ac91052f0ae5 ("tracing: tprobe-events: Fix leakage of module
refcount") moved try_module_get() from __find_tracepoint_module_cb()
to find_tracepoint() caller, but that introduced a possible UAF
because the module can be unloaded before try_module_get(). In this
case, the module object should be freed too. Thus, try_module_get()
does not only fail but may access to the freed object.
To avoid that, try_module_get() in __find_tracepoint_module_cb()
again.
Link: https://lore.kernel.org/all/174342990779.781946.9138388479067729366.stgit@devnote2/
Fixes: ac91052f0ae5 ("tracing: tprobe-events: Fix leakage of module refcount")
Cc: stable@vger.kernel.org
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
Since register_fprobe() does not get the module reference count while
registering fgraph filter, if the target functions (symbols) are in
modules, those modules can be unloaded when registering fprobe to
fgraph.
To avoid this issue, get the reference counter of module for each
symbol, and put it after register the fprobe.
Link: https://lore.kernel.org/all/174330568792.459674.16874380163991113156.stgit@devnote2/
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Closes: https://lore.kernel.org/all/20250325130628.3a9e234c@gandalf.local.home/
Fixes: 4346ba160409 ("fprobe: Rewrite fprobe on function-graph tracer")
Cc: stable@vger.kernel.org
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
Call nfs_release_request() on this error path before returning.
Fixes: c3f2235782c3 ("nfs: fold nfs_folio_find_and_lock_request into nfs_lock_and_join_requests")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/3aaaa3d5-1c8a-41e4-98c7-717801ddd171@stanley.mountain
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
RV doesn't support nested monitors having children monitors themselves
and exits with the EINVAL code. However, it returns without unlocking
the rv_interface_lock.
Unlock the lock before returning from the initialisation function.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/20250402071351.19864-2-gmonaco@redhat.com
Fixes: cb85c660fcd4 ("rv: Add option for nested monitors and include sched")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Julia Lawall <julia.lawall@inria.fr>
Closes: https://lore.kernel.org/r/202503310200.UBXGitB4-lkp@intel.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Kernel cross-compilation with BUILDTIME_MCOUNT_SORT produces zeroed
mcount values if the build-host endianness does not match the ELF
file endianness.
The mcount values array is converted from ELF file
endianness to build-host endianness during initialization in
fill_relocs()/fill_addrs(). Avoid extra conversion of these values during
weak-function zeroing; otherwise, they do not match nm-parsed addresses
and all mcount values are zeroed out.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Link: https://lore.kernel.org/patch.git-dca31444b0f1.your-ad-here.call-01743554658-ext-8692@work.hours
Fixes: ef378c3b8233 ("scripts/sorttable: Zero out weak functions in mcount_loc table")
Reported-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reported-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Closes: https://lore.kernel.org/all/your-ad-here.call-01743522822-ext-4975@work.hours/
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The trace event verifier checks the formats of trace events to make sure
that they do not point at memory that is not in the trace event itself or
in data that will never be freed. If an event references data that was
allocated when the event triggered and that same data is freed before the
event is read, then the kernel can crash by reading freed memory.
The verifier runs at boot up (or module load) and scans the print formats
of the events and checks their arguments to make sure that dereferenced
pointers are safe. If the format uses "%*p.." the verifier will ignore it,
and that could be dangerous. Cover this case as well.
Also add to the sample code a use case of "%*pbl".
Link: https://lore.kernel.org/all/bcba4d76-2c3f-4d11-baf0-02905db953dd@oracle.com/
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Fixes: 5013f454a352c ("tracing: Add check of trace event print fmts for dereferencing pointers")
Link: https://lore.kernel.org/20250327195311.2d89ec66@gandalf.local.home
Reported-by: Libo Chen <libo.chen@oracle.com>
Reviewed-by: Libo Chen <libo.chen@oracle.com>
Tested-by: Libo Chen <libo.chen@oracle.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
When the kernel contains a large number of functions that can be traced,
the loop in ftrace_graph_set_hash() may take a lot of time to execute.
This may trigger the softlockup watchdog.
Add cond_resched() within the loop to allow the kernel to remain
responsive even when processing a large number of functions.
This matches the cond_resched() that is used in other locations of the
code that iterates over all functions that can be traced.
Cc: stable@vger.kernel.org
Fixes: b9b0c831bed26 ("ftrace: Convert graph filter to use hash tables")
Link: https://lore.kernel.org/tencent_3E06CE338692017B5809534B9C5C03DA7705@qq.com
Signed-off-by: zhoumin <teczm@foxmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
If a persistent ring buffer is created, a "module_delta" array is also
allocated to hold the module deltas of loaded modules that match modules
in the scratch area. If this buffer gets freed, the module_delta array is
not freed and causes a memory leak.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250401124525.1f9ac02a@gandalf.local.home
Fixes: 35a380ddbc65 ("tracing: Show last module text symbols in the stacktrace")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The option PROBE_EVENTS_BTF_ARGS enables the functions
btf_find_func_proto() and btf_get_func_param() which are used by the
function argument tracing code. The option FUNCTION_TRACE_ARGS was
dependent on the same configs that PROBE_EVENTS_BTF_ARGS was dependent on,
but it was also dependent on PROBE_EVENTS_BTF_ARGS. In fact, if
PROBE_EVENTS_BTF_ARGS is supported then FUNCTION_TRACE_ARGS is supported.
Just make FUNCTION_TRACE_ARGS depend on PROBE_EVENTS_BTF_ARGS.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/20250401113601.17fa1129@gandalf.local.home
Fixes: 533c20b062d7c ("ftrace: Add print_function_args()")
Closes: https://lore.kernel.org/all/DB9PR08MB75820599801BAD118D123D7D93AD2@DB9PR08MB7582.eurprd08.prod.outlook.com/
Reported-by: Christian Loehle <Christian.Loehle@arm.com>
Tested-by: Christian Loehle <Christian.Loehle@arm.com>
Tested-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Merge an ACPI backlight (video) driver fix, an ACPI platform-profile
driver optimization, and a miscellaneous ACPI-related cleanup for
6.15-rc1:
- Make the ACPI backlight driver handle fetching EDID as
ACPI_TYPE_PACKAGE which is not specification-compliant, but
has been encountered in the field (Gergo Koteles).
- Simplify the aggregation of choices in the ACPI platform-profile
driver which has become possible after recent modifications of that
driver (Kurt Borja).
- Use str_enabled_disabled() instead of hardcoded strings in the ACPI
code related to NUMA (Thorsten Blum).
* acpi-video:
ACPI: video: Handle fetching EDID as ACPI_TYPE_PACKAGE
* acpi-platform-profile:
ACPI: platform_profile: Optimize _aggregate_choices()
* acpi-misc:
ACPI: NUMA: Use str_enabled_disabled() helper function
|
|
Merge an x86-specific ACPI fix, an ACPI processor driver fix, and a new
ACPI resources management quirk for 6.15-rc1:
- Extend the Lenovo Yoga Tab 3 ACPI quirk to skip GPIO event-handlers
along with ACPI AC and battery which makes it work with Linux when
started in the Windows mode (Hans de Goede).
- Prevent the ACPI processor idle driver from being used on systems
without _CST and with invalid C2/C3 in FADT in order to restore its
previous (and expected) behavior that has been altered inadvertently
by a recent code change (Giovanni Gherdovich).
- Skip ACPI IRQ override on ASUS Vivobook 14 X1404VAP to make the
internal keyboard work on it (Paul Menzel).
* acpi-x86:
ACPI: x86: Extend Lenovo Yoga Tab 3 quirk with skip GPIO event-handlers
* acpi-processor:
ACPI: processor: idle: Return an error if both P_LVL{2,3} idle states are invalid
* acpi-resource:
ACPI: resource: Skip IRQ override on ASUS Vivobook 14 X1404VAP
|
|
According to the DP spec TPS4 is mandatory for HBR3. We have
however seen some broken eDP sinks that violate this and
declare support for HBR3 without TPS4 support.
At least in the case of the icl Dell XPS 13 7390 this results
in an unstable output.
Reject HBR3 when TPS4 supports is unavailable on the sink.
v2: Leave breadcrumbs in dmesg to avoid head scratching (Jani)
Cc: stable@vger.kernel.org
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/5969
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250306210740.11886-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
Use io_uring vectored fixed kernel buffer for handling stripe IO.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250325135155.935398-5-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
io_uring has supported fixed kernel buffer via io_buffer_register_bvec()
and io_buffer_unregister_bvec().
The vectored fixed buffer has been ready, so it is natural to support
fixed kernel buffer, one use case is ublk.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250325135155.935398-4-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add helper of for_each_mp_bvec() for io_uring to import fixed kernel
buffer.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250325135155.935398-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add helper of validate_fixed_range() for validating fixed buffer
range.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Link: https://lore.kernel.org/r/20250325135155.935398-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The IBM CAPI (cxl) driver was removed in 6.15, not 6.14.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.15
A relatively large set of fixes that came in since the release, mostly
for Qualcomm platforms. The biggest block of fixes is the set from
Srini which fixes various quality and glitching issues on AudioReach
systems.
|
|
The lookup table forces the use of the "pinctrl-bcm2835" GPIO chip
provider and essentially assumes that there is going to be such a
provider, and if not, we will fail to set-up the SPI device.
While this is true on Raspberry Pi based systems (2835/36/37, 2711,
2712), this is not true on 7712/77122 Broadcom STB systems which use the
SPI driver, but not the GPIO driver.
There used to be an early check:
chip = gpiochip_find("pinctrl-bcm2835", chip_match_name);
if (!chip)
return 0;
which would accomplish that nicely, bring something similar back by
checking for the compatible strings matched by the pinctrl-bcm2835.c
driver, if there is no Device Tree node matching those compatible
strings, then we won't find any GPIO provider registered by the
"pinctrl-bcm2835" driver.
Fixes: 21f252cd29f0 ("spi: bcm2835: reduce the abuse of the GPIO API")
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250401233603.2938955-1-florian.fainelli@broadcom.com
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There is a possible race between removing a cgroup diectory that is
a partition root and the creation of a new partition. The partition
to be removed can be dying but still online, it doesn't not currently
participate in checking for exclusive CPUs conflict, but the exclusive
CPUs are still there in subpartitions_cpus and isolated_cpus. These
two cpumasks are global states that affect the operation of cpuset
partitions. The exclusive CPUs in dying cpusets will only be removed
when cpuset_css_offline() function is called after an RCU delay.
As a result, it is possible that a new partition can be created with
exclusive CPUs that overlap with those of a dying one. When that dying
partition is finally offlined, it removes those overlapping exclusive
CPUs from subpartitions_cpus and maybe isolated_cpus resulting in an
incorrect CPU configuration.
This bug was found when a warning was triggered in
remote_partition_disable() during testing because the subpartitions_cpus
mask was empty.
One possible way to fix this is to iterate the dying cpusets as well and
avoid using the exclusive CPUs in those dying cpusets. However, this
can still cause random partition creation failures or other anomalies
due to racing. A better way to fix this race is to reset the partition
state at the moment when a cpuset is being killed.
Introduce a new css_killed() CSS function pointer and call it, if
defined, before setting CSS_DYING flag in kill_css(). Also update the
css_is_dying() helper to use the CSS_DYING flag introduced by commit
33c35aa48178 ("cgroup: Prevent kill_css() from being called more than
once") for proper synchronization.
Add a new cpuset_css_killed() function to reset the partition state of
a valid partition root if it is being killed.
Fixes: ee8dde0cd2ce ("cpuset: Add new v2 cpuset.sched.partition flag")
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
There is another VivoBook model which built-in mic got broken recently
by the fix of the pin sort. Apply the correct quirk
ALC256_FIXUP_ASUS_MIC_NO_PRESENCE to this model for addressing the
regression, too.
Fixes: 3b4309546b48 ("ALSA: hda: Fix headset detection failure due to unstable sort")
Closes: https://lore.kernel.org/Z95s5T6OXFPjRnKf@eldamar.lan
Link: https://patch.msgid.link/20250402074208.7347-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This patch was integrated CS Amp and support mute led function for HP platform.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Link: https://lore.kernel.org/2c960ab58b4d4090ad4ee075f8cfdffd@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
We are seeing timeouts in opening CRC fd when testing on setup where DP
Panel Replay can be enabled. Fix these by checking if CRC is enabled for DP
Panel Replay as well.
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20250331090747.2964028-1-jouni.hogander@intel.com
|
|
The Client send malformed smb2 negotiate request. ksmbd return error
response. Subsequently, the client can send smb2 session setup even
thought conn->preauth_info is not allocated.
This patch add KSMBD_SESS_NEED_SETUP status of connection to ignore
session setup request if smb2 negotiate phase is not complete.
Cc: stable@vger.kernel.org
Tested-by: Steve French <stfrench@microsoft.com>
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-26505
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Rather tiny pull request, mostly so that we can get into our trees
your fix to the x86 Makefile.
Current release - regressions:
- Revert "tcp: avoid atomic operations on sk->sk_rmem_alloc", error
queue accounting was missed
Current release - new code bugs:
- 5 fixes for the netdevice instance locking work
Previous releases - regressions:
- usbnet: restore usb%d name exception for local mac addresses
Previous releases - always broken:
- rtnetlink: allocate vfinfo size for VF GUIDs when supported, avoid
spurious GET_LINK failures
- eth: mana: Switch to page pool for jumbo frames
- phy: broadcom: Correct BCM5221 PHY model detection
Misc:
- selftests: drv-net: replace helpers for referring to other files"
* tag 'net-6.15-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (22 commits)
Revert "tcp: avoid atomic operations on sk->sk_rmem_alloc"
bnxt_en: bring back rtnl lock in bnxt_shutdown
eth: gve: add missing netdev locks on reset and shutdown paths
selftests: mptcp: ignore mptcp_diag binary
selftests: mptcp: close fd_in before returning in main_loop
selftests: mptcp: fix incorrect fd checks in main_loop
mptcp: fix NULL pointer in can_accept_new_subflow
octeontx2-af: Free NIX_AF_INT_VEC_GEN irq
octeontx2-af: Fix mbox INTR handler when num VFs > 64
net: fix use-after-free in the netdev_nl_sock_priv_destroy()
selftests: net: use Path helpers in ping
selftests: net: use the dummy bpf from net/lib
selftests: drv-net: replace the rpath helper with Path objects
net: lapbether: use netdev_lockdep_set_classes() helper
net: phy: broadcom: Correct BCM5221 PHY model detection
net: usb: usbnet: restore usb%d name exception for local mac addresses
net/mlx5e: SHAMPO, Make reserved size independent of page size
net: mana: Switch to page pool for jumbo frames
MAINTAINERS: Add dedicated entries for phy_link_topology
net: move replay logic to tc_modify_qdisc
...
|
|
Pull VFIO updates from Alex Williamson:
- Relax IGD support code to match display class device rather than
specifically requiring a VGA device (Tomita Moeko)
- Accelerate DMA mapping of device MMIO by iterating at PMD and PUD
levels to take advantage of huge pfnmap support added in v6.12
(Alex Williamson)
- Extend virtio vfio-pci variant driver to include migration support
for block devices where enabled by the PF (Yishai Hadas)
- Virtualize INTx PIN register for devices where the platform does not
route legacy PCI interrupts for the device and the interrupt is
reported as IRQ_NOTCONNECTED (Alex Williamson)
* tag 'vfio-v6.15-rc1' of https://github.com/awilliam/linux-vfio:
vfio/pci: Handle INTx IRQ_NOTCONNECTED
vfio/virtio: Enable support for virtio-block live migration
vfio/type1: Use mapping page mask for pfnmaps
mm: Provide address mask in struct follow_pfnmap_args
vfio/type1: Use consistent types for page counts
vfio/type1: Use vfio_batch for vaddr_get_pfns()
vfio/type1: Convert all vaddr_get_pfns() callers to use vfio_batch
vfio/type1: Catch zero from pin_user_pages_remote()
vfio/pci: match IGD devices in display controller class
|
|
Pull virtio updates from Michael Tsirkin:
"A small number of improvements all over the place:
- shutdown has been reworked to reset devices
- virtio fs is now allowed in vduse
- vhost-scsi memory use has been reduced
- cleanups, fixes all over the place
A couple more fixes are being tested and will be merged after rc1"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vhost-scsi: Reduce response iov mem use
vhost-scsi: Allocate iov_iter used for unaligned copies when needed
vhost-scsi: Stop duplicating se_cmd fields
vhost-scsi: Dynamically allocate scatterlists
vhost-scsi: Return queue full for page alloc failures during copy
vhost-scsi: Add better resource allocation failure handling
vhost-scsi: Allocate T10 PI structs only when enabled
vhost-scsi: Reduce mem use by moving upages to per queue
vduse: add virtio_fs to allowed dev id
sound/virtio: Fix cancel_sync warnings on uninitialized work_structs
vdpa/mlx5: Fix oversized null mkey longer than 32bit
vdpa/mlx5: Fix mlx5_vdpa_get_config() endianness on big-endian machines
vhost-scsi: Fix handling of multiple calls to vhost_scsi_set_endpoint
tools: virtio/linux/module.h add MODULE_DESCRIPTION() define.
tools: virtio/linux/compiler.h: Add data_race() define.
tools/virtio: Add DMA_MAPPING_ERROR and sg_dma_len api define for virtio test
virtio: break and reset virtio devices on device_shutdown()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd updates from Jason Gunthorpe:
"Two significant new items:
- Allow reporting IOMMU HW events to userspace when the events are
clearly linked to a device.
This is linked to the VIOMMU object and is intended to be used by a
VMM to forward HW events to the virtual machine as part of
emulating a vIOMMU. ARM SMMUv3 is the first driver to use this
mechanism. Like the existing fault events the data is delivered
through a simple FD returning event records on read().
- PASID support in VFIO.
The "Process Address Space ID" is a PCI feature that allows the
device to tag all PCI DMA operations with an ID. The IOMMU will
then use the ID to select a unique translation for those DMAs. This
is part of Intel's vIOMMU support as VT-D HW requires the
hypervisor to manage each PASID entry.
The support is generic so any VFIO user could attach any
translation to a PASID, and the support should work on ARM SMMUv3
as well. AMD requires additional driver work.
Some minor updates, along with fixes:
- Prevent using nested parents with fault's, no driver support today
- Put a single "cookie_type" value in the iommu_domain to indicate
what owns the various opaque owner fields"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd: (49 commits)
iommufd: Test attach before detaching pasid
iommufd: Fix iommu_vevent_header tables markup
iommu: Convert unreachable() to BUG()
iommufd: Balance veventq->num_events inc/dec
iommufd: Initialize the flags of vevent in iommufd_viommu_report_event()
iommufd/selftest: Add coverage for reporting max_pasid_log2 via IOMMU_HW_INFO
iommufd: Extend IOMMU_GET_HW_INFO to report PASID capability
vfio: VFIO_DEVICE_[AT|DE]TACH_IOMMUFD_PT support pasid
vfio-iommufd: Support pasid [at|de]tach for physical VFIO devices
ida: Add ida_find_first_range()
iommufd/selftest: Add coverage for iommufd pasid attach/detach
iommufd/selftest: Add test ops to test pasid attach/detach
iommufd/selftest: Add a helper to get test device
iommufd/selftest: Add set_dev_pasid in mock iommu
iommufd: Allow allocating PASID-compatible domain
iommu/vt-d: Add IOMMU_HWPT_ALLOC_PASID support
iommufd: Enforce PASID-compatible domain for RID
iommufd: Support pasid attach/replace
iommufd: Enforce PASID-compatible domain in PASID path
iommufd/device: Add pasid_attach array to track per-PASID attach
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC documentation fix from Borislav Petkov:
- A single fix making sure the EDAC subtree is included in the
documentation table of contents
* tag 'edac_urgent_for_v6.15_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
Documentation/EDAC: Fix warning document isn't included in any toctree
|
|
This merges in the removal of the IBM CAPI "cxl" driver.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more thermal control updates from Rafael Wysocki:
"These are mostly assorted updates of thermal drivers used on ARM
platforms:
- Use dev_err_probe() helpers to simplify the init code in the Qoriq
thermal driver (Frank Li)
- Power down the Qoriq's TMU at suspend time (Alice Guo)
- Add ipq5332, ipq5424 compatible to the QCom's tsens thermal driver
and TSENS enable / calibration support for V2 (Praveenkumar I)
- Add missing rk3328 mapping entry (Trevor Woerner)
- Remove duplicate struct declaration from the thermal core header
file (Xueqin Luo)
- Disable the monitoring mode during suspend in the LVTS Mediatek
driver to prevent temperature acquisition glitches (Nícolas F. R.
A. Prado)
- Disable Stage 3 thermal threshold in the LVTS Mediatek driver
because it disables the suspend ability and does not have an
interrupt handler (Nícolas F. R. A. Prado)
- Fix low temperature offset interrupt in the LVTS Mediatek driver to
prevent multiple interrupts from triggering when the system is at
its normal functionning temperature (Nícolas F. R. A. Prado)
- Enable interrupts in the LVTS Mediatek driver only on sensors that
are in use (Nícolas F. R. A. Prado)
- Add the BCM74110 compatible DT binding and the corresponding code
to support a chip based on a different process node than previous
chips (Florian Fainelli)
- Correct indentation and style in DTS example (Krzysztof Kozlowski)
- Unify hexadecimal annotatation in the rcar_gen3 driver (Niklas
Söderlund)
- Factor out the code logic to read fuses on Gen3 and Gen4 in the
rcar_gen3 thermal driver (Niklas Söderlund)
- Drop unused driver data from the QCom's spmi temperature alarm
driver (Johan Hovold)"
* tag 'thermal-6.15-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal/drivers/qcom-spmi-temp-alarm: Drop unused driver data
thermal: rcar_gen3: Reuse logic to read fuses on Gen3 and Gen4
thermal: rcar_gen3: Use lowercase hex constants
dt-bindings: thermal: Correct indentation and style in DTS example
thermal/drivers/brcmstb_thermal: Add support for BCM74110
dt-bindings: thermal: Update for BCM74110
thermal/drivers/mediatek/lvts: Only update IRQ enable for valid sensors
thermal/drivers/mediatek/lvts: Start sensor interrupts disabled
thermal/drivers/mediatek/lvts: Disable low offset IRQ for minimum threshold
thermal/drivers/mediatek/lvts: Disable Stage 3 thermal threshold
thermal/drivers/mediatek/lvts: Disable monitor mode during suspend
thermal: core: Remove duplicate struct declaration
thermal/drivers/rockchip: Add missing rk3328 mapping entry
thermal/drivers/tsens: Add TSENS enable and calibration support for V2
dt-bindings: thermal: tsens: Add ipq5332, ipq5424 compatible
thermal/drivers/qoriq: Power down TMU on system suspend
thermal/drivers/qoriq: Use dev_err_probe() simplify the code
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull i3c updates from Alexandre Belloni:
"The silvaco driver gets support for the integration of the IP in the
Nuvoton npcm845 SoC. There is also a fix for a possible NULL pointer
dereference that can happen with early IBIs. Summary:
Core:
- Fix a possible NULL pointer dereference due to IBI coming when the
target driver is not yet probed.
Drivers:
- mipi-i3c-hci: Use I2C DMA-safe api
- svc: add Nuvoton npcm845 support"
* tag 'i3c/for-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
i3c: Add NULL pointer check in i3c_master_queue_ibi()
i3c: master: Drop duplicate check before calling OF APIs
i3c: master: svc: Fix implicit fallthrough in svc_i3c_master_ibi_work()
i3c: master: svc: Fix missing STOP for master request
i3c: master: svc: Use readsb helper for reading MDB
i3c: master: svc: Fix missing the IBI rules
i3c: master: svc: Fix i3c_master_get_free_addr return check
i3c: master: svc: Fix npcm845 DAA process corruption
i3c: master: svc: Fix npcm845 invalid slvstart event
i3c: master: svc: Fix npcm845 FIFO empty issue
i3c: master: svc: Add support for Nuvoton npcm845 i3c
dt-bindings: i3c: silvaco: Add npcm845 compatible string
dt-bindings: i3c: dw: Add power-domains
i3c: master: svc: Flush FIFO before sending Dynamic Address Assignment(DAA)
i3c: mipi-i3c-hci: Use I2C DMA-safe api
i3c: Remove the const qualifier from i2c_msg pointer in i2c_xfers API
MAINTAINERS: Add Frank Li to Silvaco I3C
MAINTAINERS: Remove Conor Culhane from Silvaco I3C
|
|
git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
- Add watchdog driver for Lenovo SE30 platform
- Add support for Allwinner A523
- Add i.MX94 support
- watchdog framework: Convert to use device property
- renesas,wdt: Document RZ/G3E support
- Various other fixes and improvemenents
* tag 'linux-watchdog-6.15-rc1' of git://www.linux-watchdog.org/linux-watchdog:
watchdog: sunxi_wdt: Add support for Allwinner A523
dt-bindings: watchdog: sunxi: add Allwinner A523 compatible string
watchdog: aspeed: fix 64-bit division
watchdog: npcm: Remove unnecessary NULL check before clk_prepare_enable/clk_disable_unprepare
dt-bindings: watchdog: renesas,wdt: Document RZ/G3E support
watchdog: Convert to use device property
watchdog: lenovo_se30_wdt: include io.h for devm_ioremap()
dt-bindings: watchdog: fsl-imx7ulp-wdt: Add i.MX94 support
watchdog: nic7018_wdt: tidy up ACPI ID table
watchdog: s3c2410_wdt: Fix PMU register bits for ExynosAutoV920 SoC
watchdog: lenovo_se30_wdt: Watchdog driver for Lenovo SE30 platform
watchdog: Enable RZV2HWDT driver depend on ARCH_RENESAS
watchdog: cros-ec: Add newlines to printks
watchdog: aspeed: Update bootstatus handling
|
|
initial_plane_phys_lmem() and initial_plane_phys_smem() are
now identical. Remove one of them.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250313140838.29742-11-ville.syrjala@linux.intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
|
|
Replace the hardcoded PTE vs. memory region is_local checks
in the BIOS FB takeover with intel_memory_region_type_is_local().
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250313140838.29742-10-ville.syrjala@linux.intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
|
|
When doing the BIOS FB takeover let's look up the appropriate
memory region first. If it doesn't exist there's not much point
in doing the PTE read/etc either.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250313140838.29742-9-ville.syrjala@linux.intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
|
|
Use intel_memory_region_by_type() to find the appropriate memory
region for the BIOS FB takeover.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250313140838.29742-8-ville.syrjala@linux.intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
|
|
Now that we have intel_ggtt_read_entry() we can easily read out the
first PTE of the BIOS FB and verify that it looks correct. We'll
also use the extracted dma address to figure out where in stolen
the FB lives (so far we've just assumed that it sits at offset 0,
and in practice that does seem to be true, but better safe than
sorry).
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250313140838.29742-7-ville.syrjala@linux.intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
|
|
Use intel_ggtt_read_entry() instead of open coding the PTE
read/decode in the BIOS FB takeover code. So far this codepath
only covers platforms with LMEMBAR.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250313140838.29742-6-ville.syrjala@linux.intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
|
|
The BIOS FB takeover code wants to read out the PTEs (or at least
one of them) to figure out where the FB is located in memory.
Currently we only do that for systems with LMEMBAR, and we've
open coded the PTE decoding in the display code. Introduce a more
proper abstract interface (intel_ggtt_read_entry()) for this purpose,
and implement it for all platforms.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250313140838.29742-5-ville.syrjala@linux.intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
|
|
i915 wants to read out the PTE(s) populated by the BIOS/GOP
to verify that the framebuffer is in the correct location.
Introduce intel_gmch_gtt_read_entry() that reads out the
PTE and decodes it to a somewhat abstract form. For now
we just return the dma_addr, present bit, and local memory
bit. I didn't bother with the snoop bit/etc.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250313140838.29742-4-ville.syrjala@linux.intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
|
|
Rename region_type_str() into intel_memory_type_str() and
expose it outside intel_memory_region.c. I'll have another
use for this in the BIOS FB takeover code.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250313140838.29742-3-ville.syrjala@linux.intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
|
|
Extract the "is this memory region local?" check into a helper.
I'll have another use for this in the BIOS FB takeover.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250313140838.29742-2-ville.syrjala@linux.intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
|
