summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-04-07Bluetooth: hci_uart: Add support Intel address configurationMarcel Holtmann
When using vendor detection, this adds support for the Intel specific address configuration command. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-04-07Bluetooth: hci_uart: Add support for vendor detection flagMarcel Holtmann
This adds a new HCI_UART_VND_DETECT flag to allow automatic vendor detection. This allows to enable known vendor commands (for example for setting the public device address) when using a standard H:4 UART protocol or when running in virtual machines. When this new flag is configured and no vendor specific setup routine is provided, then the local version information are read and the provided manufacturer information can be evaluated to configure extra vendor callbacks. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-04-07mac80211: Move message tracepoints to their own headerSteven Rostedt (Red Hat)
Every tracing file must have its own TRACE_SYSTEM defined. The mac80211 tracepoint header broke this and add in the middle of the file had: #undef TRACE_SYSTEM #define TRACE_SYSTEM mac80211_msg Unfortunately, this broke new code in the ftrace infrastructure. Moving the mac80211_msg into its own trace file with its own TRACE_SYSTEM defined fixes the issue. Link: http://lkml.kernel.org/r/1428389938.1841.1.camel@sipsolutions.net Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-04-07tracing: Add TRACE_SYSTEM_VAR to xhci-hcdSteven Rostedt (Red Hat)
New code will require TRACE_SYSTEM to be a valid C variable name, but some tracepoints have TRACE_SYSTEM with '-' and not '_', so it can not be used. Instead, add a TRACE_SYSTEM_VAR that can give the tracing infrastructure a unique name for the trace system. Cc: Xenia Ragiadakou <burzalodowa@gmail.com> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-04-07tracing: Add TRACE_SYSTEM_VAR to kvm-s390Steven Rostedt (Red Hat)
New code will require TRACE_SYSTEM to be a valid C variable name, but some tracepoints have TRACE_SYSTEM with '-' and not '_', so it can not be used. Instead, add a TRACE_SYSTEM_VAR that can give the tracing infrastructure a unique name for the trace system. Link: http://lkml.kernel.org/r/20150402111500.5e52c1ed.cornelia.huck@de.ibm.com Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: David Hildenbrand <dahi@linux.vnet.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-04-07tracing: Add TRACE_SYSTEM_VAR to intel-sstSteven Rostedt (Red Hat)
New code will require TRACE_SYSTEM to be a valid C variable name, but some tracepoints have TRACE_SYSTEM with '-' and not '_', so it can not be used. Instead, add a TRACE_SYSTEM_VAR that can give the tracing infrastructure a unique name for the trace system. Link: http://lkml.kernel.org/r/20150402142831.GT6023@sirena.org.uk Acked-by: Mark Brown <broonie@kernel.org> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-04-07tracing/drm: Remove unused TRACE_SYSTEM_STRING defineSteven Rostedt
The tracing infrastructure is adding a macro TRACE_SYSTEM_STRING, and hit the following build failure: In file included from include/trace/define_trace.h:90:0, from drivers/gpu/drm/.//radeon/radeon_trace.h:209, from drivers/gpu/drm/.//radeon/radeon_trace_points.c:9: >> include/trace/ftrace.h:28:0: warning: "TRACE_SYSTEM_STRING" redefined #define TRACE_SYSTEM_STRING __app(TRACE_SYSTEM_VAR,__trace_system_name) Seems that the DRM folks have added their own use to the TRACE_SYSTEM_STRING, with: #define TRACE_SYSTEM_STRING __stringify(TRACE_SYSTEM) Although, I can not find its use anywhere. I could simply use another name, but if this macro is not being used, it should be removed. Link: http://lkml.kernel.org/r/20150402123736.01eda052@gandalf.local.home Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-04-07Merge tag 'kvm-s390-next-20150331' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD Features and fixes for 4.1 (kvm/next) 1. Assorted changes 1.1 allow more feature bits for the guest 1.2 Store breaking event address on program interrupts 2. Interrupt handling rework 2.1 Fix copy_to_user while holding a spinlock (cc stable) 2.2 Rework floating interrupts to follow the priorities 2.3 Allow to inject all local interrupts via new ioctl 2.4 allow to get/set the full local irq state, e.g. for migration and introspection
2015-04-07Merge tag 'kvm-arm-for-4.1' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into 'kvm-next' KVM/ARM changes for v4.1: - fixes for live migration - irqfd support - kvm-io-bus & vgic rework to enable ioeventfd - page ageing for stage-2 translation - various cleanups
2015-04-07Revert "libceph: use memalloc flags for net IO"Ilya Dryomov
This reverts commit 89baaa570ab0b476db09408d209578cfed700e9f. Dirty page throttling should be sufficient for us in the general case so there is no need to use __GFP_MEMALLOC - it would be needed only in the swap-over-rbd case, which we currently don't support. (It would probably take approximately the commit that is being reverted to add that support, but we would also need the "swap" option to distinguish from the general case and make sure swap ceph_client-s aren't shared with anything else.) See ceph-devel threads [1] and [2] for the details of why enabling pfmemalloc reserves for all cases is a bad thing. On top of potential system lockups related to drained emergency reserves, this turned out to cause ceph lockups in case peers are on the same host and communicating via loopback due to sk_filter() dropping pfmemalloc skbs on the receiving side because the receiving loopback socket is not tagged with SOCK_MEMALLOC. [1] "SOCK_MEMALLOC vs loopback" http://www.spinics.net/lists/ceph-devel/msg22998.html [2] "[PATCH] libceph: don't set memalloc flags in loopback case" http://www.spinics.net/lists/ceph-devel/msg23392.html Conflicts: net/ceph/messenger.c [ context: tcp_nodelay option ] Cc: Mike Christie <michaelc@cs.wisc.edu> Cc: Mel Gorman <mgorman@suse.de> Cc: Sage Weil <sage@redhat.com> Cc: stable@vger.kernel.org # 3.18+, needs backporting Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Acked-by: Mike Christie <michaelc@cs.wisc.edu> Acked-by: Mel Gorman <mgorman@suse.de>
2015-04-07Merge tag 'kvm-arm-fixes-4.0-rc5' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into 'kvm-next' Fixes for KVM/ARM for 4.0-rc5. Fixes page refcounting issues in our Stage-2 page table management code, fixes a missing unlock in a gicv3 error path, and fixes a race that can cause lost interrupts if signals are pending just prior to entering the guest.
2015-04-07Merge branch 'for-upstream' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2015-04-04 Here's what's probably the last bluetooth-next pull request for 4.1: - Fixes for LE advertising data & advertising parameters - Fix for race condition with HCI_RESET flag - New BNEPGETSUPPFEAT ioctl, needed for certification - New HCI request callback type to get the resulting skb - Cleanups to use BIT() macro wherever possible - Consolidate Broadcom device entries in the btusb HCI driver - Check for valid flags in CMTP, HIDP & BNEP - Disallow local privacy & OOB data combo to prevent a potential race - Expose SMP & ECDH selftest results through debugfs - Expose current Device ID info through debugfs Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-07Input: ALPS - V7 devices can report 5-finger tapsMasaki Ota
Signed-off-by: Masaki Ota <masaki.ota@jp.alps.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-04-07Input: ALPS - add support for SS4 touchpad devicesMasaki Ota
This change adds support for SS4 touchpad devices as ALPS_PROTO_V8 protocol. They are real multi-touch devices and can be found in TOSHIBA Tecra C50. Signed-off-by: Masaki Ota <masaki.ota@jp.alps.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-04-07Input: ALPS - refactor alps_set_abs_params_mt()Masaki Ota
In preparation for adding support for SS4 touchpads, let's split alps_set_abs_params_mt into common, v7-specific, and other protocols portions. Signed-off-by: Masaki Ota <masaki.ota@jp.alps.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-04-07Merge tag 'v4.0-rc7' into nextDmitry Torokhov
Sync up with Linux 4.0-rc7 to bring in ALPS changes.
2015-04-07ARM: vexpress: fix CPU hotplug with CT9x4 tile.Russell King
The Cortex A9 tile fails to unplug CPUs if errata 643719 is not enabled. This leads to random weird behaviours, but ultimately seem to lock the kernel one way or another when a CPU is hot unplugged. Symptoms range from a spinlock lockup in the scheduler, the entire system hanging, to dumping out the kernel printk buffer a few lines at a time, and other weird behaviours. This is caused by the outgoing CPU not having its inner caches properly flushed before it exits coherency - flush_cache_louis() is used to achieve this, but as a result of the hardware bug, this function ends up doing nothing without the errata workaround enabled. As the Versatile Express has an affected CPU, this errata must always be enabled. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-04-07x86/mm/numa: Fix kernel stack corruption in ↵Dave Young
numa_init()->numa_clear_kernel_node_hotplug() I got below kernel panic during kdump test on Thinkpad T420 laptop: [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000037ba4fff] [ 0.000000] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: ffffffff81d21910 ... [ 0.000000] Call Trace: [ 0.000000] [<ffffffff817c2a26>] dump_stack+0x45/0x57 [ 0.000000] [<ffffffff817bc8d2>] panic+0xd0/0x204 [ 0.000000] [<ffffffff81d21910>] ? numa_clear_kernel_node_hotplug+0xe6/0xf2 [ 0.000000] [<ffffffff8107741b>] __stack_chk_fail+0x1b/0x20 [ 0.000000] [<ffffffff81d21910>] numa_clear_kernel_node_hotplug+0xe6/0xf2 [ 0.000000] [<ffffffff81d21e5d>] numa_init+0x1a5/0x520 [ 0.000000] [<ffffffff81d222b1>] x86_numa_init+0x19/0x3d [ 0.000000] [<ffffffff81d22460>] initmem_init+0x9/0xb [ 0.000000] [<ffffffff81d0d00c>] setup_arch+0x94f/0xc82 [ 0.000000] [<ffffffff81d05120>] ? early_idt_handlers+0x120/0x120 [ 0.000000] [<ffffffff817bd0bb>] ? printk+0x55/0x6b [ 0.000000] [<ffffffff81d05120>] ? early_idt_handlers+0x120/0x120 [ 0.000000] [<ffffffff81d05d9b>] start_kernel+0xe8/0x4d6 [ 0.000000] [<ffffffff81d05120>] ? early_idt_handlers+0x120/0x120 [ 0.000000] [<ffffffff81d05120>] ? early_idt_handlers+0x120/0x120 [ 0.000000] [<ffffffff81d055ee>] x86_64_start_reservations+0x2a/0x2c [ 0.000000] [<ffffffff81d05751>] x86_64_start_kernel+0x161/0x184 [ 0.000000] ---[ end Kernel panic - not syncing: stack-protector: Kernel sta This is caused by writing over the end of numa mask bitmap in numa_clear_kernel_node(). numa_clear_kernel_node() tries to set the node id in a mask bitmap, by iterating all reserved regions and assuming that every region has a valid nid. This assumption is not true because there's an exception for some graphic memory quirks. See trim_snb_memory() in arch/x86/kernel/setup.c It is easily to reproduce the bug in the kdump kernel because kdump kernel use pre-reserved memory instead of the whole memory, but kexec pass other reserved memory ranges to 2nd kernel as well. like below in my test: kdump kernel ram 0x2d000000 - 0x37bfffff One of the reserved regions: 0x40000000 - 0x40100000 which includes 0x40004000, a page excluded in trim_snb_memory(). For this memblock reserved region the nid is not set, it is still default value MAX_NUMNODES. later node_set will set bit MAX_NUMNODES thus stack corruption happen. This also happens when booting with mem= kernel commandline during my test. Fixing it by adding a check, do not call node_set in case nid is MAX_NUMNODES. Signed-off-by: Dave Young <dyoung@redhat.com> Reviewed-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Borislav Petkov <bp@alien8.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: bhe@redhat.com Cc: qiuxishi@huawei.com Link: http://lkml.kernel.org/r/20150407134132.GA23522@dhcp-16-198.nay.redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-07sh-pfc: r8a7790: add EtherAVB pin groupsSergei Shtylyov
Add EtherAVB pin groups to R8A7790 PFC driver. Based on original patch by Mitsuhiro Kimura <mitsuhiro.kimura.kc@renesas.com>. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-04-07pinctrl: Document "function" + "pins" pinmux bindingAndrew Bresticker
Currently the "function" + "groups" combination is the only documented format for pinmux nodes, although many drivers use "function" + "pins". Update the generic pinctrl binding to include the "function" + "pins" combination as well. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-04-07Input - mt: Fix input_mt_get_slot_by_keyBenjamin Tissoires
The case occurred recently with a touchscreen using twice a slot during a single EV_SYN event: E: 0.288415 0000 0000 0000 # ------------ SYN_REPORT (0) ---------- E: 0.296207 0003 002f 0000 # EV_ABS / ABS_MT_SLOT 0 E: 0.296207 0003 0039 -001 # EV_ABS / ABS_MT_TRACKING_ID -1 E: 0.296207 0003 002f 0001 # EV_ABS / ABS_MT_SLOT 1 E: 0.296207 0003 0035 0908 # EV_ABS / ABS_MT_POSITION_X 908 E: 0.296207 0003 0036 1062 # EV_ABS / ABS_MT_POSITION_Y 1062 E: 0.296207 0003 002f 0000 # EV_ABS / ABS_MT_SLOT 0 E: 0.296207 0003 0039 8787 # EV_ABS / ABS_MT_TRACKING_ID 8787 E: 0.296207 0003 0035 1566 # EV_ABS / ABS_MT_POSITION_X 1566 E: 0.296207 0003 0036 0861 # EV_ABS / ABS_MT_POSITION_Y 861 E: 0.296207 0003 0000 0908 # EV_ABS / ABS_X 908 E: 0.296207 0003 0001 1062 # EV_ABS / ABS_Y 1062 E: 0.296207 0000 0000 0000 # ------------ SYN_REPORT (0) ---------- This occurred because while having already slots 0 and 1 assigned, the touchscreen sent: 0.293377 Tip Switch: 0 | Contact Id: 0 | X: 539 | Y: 1960 | Contact Count: 3 0.294783 Tip Switch: 1 | Contact Id: 1 | X: 908 | Y: 1062 | Contact Count: 0 0.296187 Tip Switch: 1 | Contact Id: 2 | X: 1566 | Y: 861 | Contact Count: 0 Slot 0 is released correclty, but when we look for Contact ID 2, the slot 0 is then picked up again because it is marked as inactive (trackingID < 0). This is wrong, and we should not reuse a slot in the same frame. The test should also check for input_mt_is_used(). In addition, we need to initialize mt->frame to an other value than 0. With mt->frame being 0, all slots are tags as currently used, and so input_mt_get_slot_by_key() would return -1 for all requests. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=88903 Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-04-07pinctrl: intel: Add Intel Sunrisepoint pin controller and GPIO supportMika Westerberg
This driver supports pinctrl/GPIO hardware found on Intel Sunrisepoint (a Skylake PCH) providing users a pinctrl and GPIO interfaces (including GPIO interrupts). The driver is split into core and platform parts so that the same core driver can be reused in other drivers for other Intel GPIO hardware that is based on the same host controller design. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-04-07drm/i915/vlv: remove wait for previous GFX clk disable requestJesse Barnes
Looks like it was introduced in: commit 650ad970a39f8b6164fe8613edc150f585315289 Author: Imre Deak <imre.deak@intel.com> Date: Fri Apr 18 16:35:02 2014 +0300 drm/i915: vlv: factor out vlv_force_gfx_clock and check for pending force-of but I'm not sure why. It has caused problems for us in the past (see 85250ddff7a6 "drm/i915/chv: Remove Wait for a previous gfx force-off" and 8d4eee9cd7a1 "drm/i915: vlv: increase timeout when forcing on the GFX clock") and doesn't seem to be required, so let's just drop it. References: https://bugs.freedesktop.org/show_bug.cgi?id=89611 Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Tested-by: Darren Hart <dvhart@linux.intel.com> Reviewed-by: Deepak S <deepak.s@linux.intel.com> Cc: stable@vger.kernel.org # c9c52e24194a: drm/i915/chv: Remove Wait ... Cc: stable@vger.kernel.org Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-04-07pinctrl: fsl: imx: Check for 0 config registerMarkus Pargmann
0 is used in all pinfunction definitions when a config register is not available, for example imx25-pinfunc.h. If a configuration value is used for such a pinfunction the driver will always write it to the configuration register if it is not -1. For a 0 configuration register the configuration value is written to offset 0x0. This can lead to a crashing/hanging system without any warning message. This patch checks for 0 config register and sets the internal value to -1. If the configuration value is not NO_PADCTL this leads to an error message that applying the configuration failed. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Tested-by: Stefan Agner <stefan@agner.ch> Acked-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-04-07drm/i915/chv: Remove Wait for a previous gfx force-offDeepak S
On CHV, PUNIT team confirmed that 'VLV_GFX_CLK_STATUS_BIT' is not a sticky bit and it will always be set. So ignore Check for previous Gfx force off during suspend and allow the force clk as part S0ix Sequence Signed-off-by: Deepak S <deepak.s@linux.intel.com> Cc: stable@vger.kernel.org Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-04-07drm/i915/vlv: save/restore the power context base regJesse Barnes
Some BIOSes (e.g. the one on the Minnowboard) don't save/restore this reg. If it's unlocked, we can just restore the previous value, and if it's locked (in case the BIOS re-programmed it for us) the write will be ignored and we'll still have "did it move" sanity check in the PM code to warn us if something is still amiss. References: https://bugs.freedesktop.org/show_bug.cgi?id=89611 Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Tested-by: Darren Hart <dvhart@linux.intel.com> Cc: stable@vger.kernel.org Reviewed-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Deepak S <deepak.s@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-04-07cfg80211: send extended capabilities IE in connectJohannes Berg
If the connect request from userspace didn't include an extended capabilities IE, create one using the driver capabilities. This fixes VHT associations, since those need to set the operating mode notification capability. Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-04-07cfg80211: move IE split utilities here from mac80211Johannes Berg
As the next patch will require the IE splitting utility functions in cfg80211, move them there from mac80211. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-04-07spi: img-spfi: Limit bit clock to 1/4th of input clockAndrew Bresticker
Although the SPFI BITCLK divider supports a value of up to 255, only values up to 128 are usable. This results in a maximum possible bit clock rate of 1/4th the input clock rate. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-07spi: img-spfi: Implement a prepare_message() callbackEzequiel Garcia
In preparation for switching to using the SPI core's CS GPIO handling, move setup of the PORT_STATE register, which must be configured before CS is asserted, to a prepare_message() callback. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@imgtec.com> Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-07Merge branch 'fix/fsl-dspi' of ↵Mark Brown
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi into spi-fsl-dspi Conflicts: drivers/spi/spi-fsl-dspi.c
2015-04-07NFC: logging neateningJoe Perches
Add missing terminating newlines to nfc_info and nfc_err to avoid possible interleaving from other messages. Miscellanea: o typo fix of "unknonwn" in message o remove unnecessary OOM messages as there's a generic dump_stack() o realign arguments Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-04-07pinctrl: Add support for Meson8bCarlo Caione
This patch adds support for the AmLogic Meson8b SoC. Signed-off-by: Carlo Caione <carlo@endlessm.com> Acked-by: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-04-07documentation: Extend pinctrl docs for Meson8bCarlo Caione
Add the compatible string for Meson8b in Meson pinctrl documentation and add new information for Meson8b in source code comments. Signed-off-by: Carlo Caione <carlo@endlessm.com> Acked-by: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-04-07pinctrl: Cleanup Meson8 driverCarlo Caione
This patch introduces a new PIN macro and few small modifications to simplify and shorten the Meson pinctrl drivers and cleanup the support file for the AmLogic Meson8 SoC. Signed-off-by: Carlo Caione <carlo@endlessm.com> Acked-by: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-04-07Fix inconsistent spinlock of AMD GPIO driver which can beKen Xue
recognized by static analysis tool smatch. Declare constant Variables with Sparse's suggestion. Signed-off-by: Ken Xue <Ken.Xue@amd.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-04-07Merge 4.0-rc7 into usb-nextGreg Kroah-Hartman
We want the fixes in here, and to help resolve merge issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-04-07pinctrl: at91: convert __raw to endian agnostic IOBen Dooks
Use endian agnostic _relaxed IO accessors instead of the __raw ones. Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Cc: Andrew Victor <linux@maxim.org.za> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-04-07Merge 4.0-rc7 into staging-nextGreg Kroah-Hartman
We want those fixes (iio primarily) into the -next branch to help with merge and testing issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-04-07vti6: fix uninit when using x-netnsYao Xiwei
When the kernel deleted a vti6 interface, this interface was not removed from the tunnels list. Thus, when the ip6_vti module was removed, this old interface was found and the kernel tried to delete it again. This was leading to a kernel panic. Fixes: 61220ab34948 ("vti6: Enable namespace changing") Signed-off-by: Yao Xiwei <xiwei.yao@6wind.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2015-04-07xfrm: fix xfrm_input/xfrm_tunnel_check oopsAlexey Dobriyan
https://bugzilla.kernel.org/show_bug.cgi?id=95211 Commit 70be6c91c86596ad2b60c73587880b47df170a41 ("xfrm: Add xfrm_tunnel_skb_cb to the skb common buffer") added check which dereferences ->outer_mode too early but larval SAs don't have this pointer set (yet). So check for tunnel stuff later. Mike Noordermeer reported this bug and patiently applied all the debugging. Technically this is remote-oops-in-interrupt-context type of thing. BUG: unable to handle kernel NULL pointer dereference at 0000000000000034 IP: [<ffffffff8150dca2>] xfrm_input+0x3c2/0x5a0 ... [<ffffffff81500fc6>] ? xfrm4_esp_rcv+0x36/0x70 [<ffffffff814acc9a>] ? ip_local_deliver_finish+0x9a/0x200 [<ffffffff81471b83>] ? __netif_receive_skb_core+0x6f3/0x8f0 ... RIP [<ffffffff8150dca2>] xfrm_input+0x3c2/0x5a0 Kernel panic - not syncing: Fatal exception in interrupt Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2015-04-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/mellanox/mlx4/cmd.c net/core/fib_rules.c net/ipv4/fib_frontend.c The fib_rules.c and fib_frontend.c conflicts were locking adjustments in 'net' overlapping addition and removal of code in 'net-next'. The mlx4 conflict was a bug fix in 'net' happening in the same place a constant was being replaced with a more suitable macro. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-07Revert "PM / hibernate: avoid unsafe pages in e820 reserved regions"Rafael J. Wysocki
Commit 84c91b7ae07c (PM / hibernate: avoid unsafe pages in e820 reserved regions) is reported to make resume from hibernation on Lenovo x230 unreliable, so revert it. We will revisit the issue the commit in question was supposed to fix in the future. Link: https://bugzilla.kernel.org/show_bug.cgi?id=96111 Reported-by: rhn <kebuac.rhn@porcupinefactory.org> Cc: 3.17+ <stable@vger.kernel.org> # 3.17+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-04-06Linux 4.0-rc7v4.0-rc7Linus Torvalds
2015-04-06Input: elantech - fix absolute mode setting on some ASUS laptopsUlrik De Bie
On ASUS TP500LN and X750JN, the touchpad absolute mode is reset each time set_rate is done. In order to fix this, we will verify the firmware version, and if it matches the one in those laptops, the set_rate function is overloaded with a function elantech_set_rate_restore_reg_07 that performs the set_rate with the original function, followed by a restore of reg_07 (the register that sets the absolute mode on elantech v4 hardware). Also the ASUS TP500LN and X750JN firmware version, capabilities, and button constellation is added to elantech.c Cc: stable@vger.kernel.org Reported-and-tested-by: George Moutsopoulos <gmoutso@yahoo.co.uk> Signed-off-by: Ulrik De Bie <ulrik.debie-os@e2big.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-04-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) In TCP, don't register an FRTO for cumulatively ACK'd data that was previously SACK'd, from Neal Cardwell. 2) Need to hold RNL mutex in ipv4 multicast code namespace cleanup, from Cong WANG. 3) Similarly we have to hold RNL mutex for fib_rules_unregister(), also from Cong WANG. 4) Revert and rework netns nsid allocation fix, from Nicolas Dichtel. 5) When we encapsulate for a tunnel device, skb->sk still points to the user socket. So this leads to cases where we retraverse the ipv4/ipv6 output path with skb->sk being of some other address family (f.e. AF_PACKET). This can cause things to crash since the ipv4 output path is dereferencing an AF_PACKET socket as if it were an ipv4 one. The short term fix for 'net' and -stable is to elide these socket checks once we've entered an encapsulation sequence by testing xmit_recursion. Longer term we have a better solution wherein we pass the tunnel's socket down through the output paths, but that is way too invasive for 'net' and -stable. From Hannes Frederic Sowa. 6) l2tp_init() failure path forgets to unregister per-net ops, from Cong WANG. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: net/mlx4_core: Fix error message deprecation for ConnectX-2 cards net: dsa: fix filling routing table from OF description l2tp: unregister l2tp_net_ops on failure path mvneta: dont call mvneta_adjust_link() manually ipv6: protect skb->sk accesses from recursive dereference inside the stack netns: don't allocate an id for dead netns Revert "netns: don't clear nsid too early on removal" ip6mr: call del_timer_sync() in ip6mr_free_table() net: move fib_rules_unregister() under rtnl lock ipv4: take rtnl_lock and mark mrt table as freed on namespace cleanup tcp: fix FRTO undo on cumulative ACK of SACKed range xen-netfront: transmit fully GSO-sized packets
2015-04-06ioctx_alloc(): fix vma (and file) leak on failureAl Viro
If we fail past the aio_setup_ring(), we need to destroy the mapping. We don't need to care about anybody having found ctx, or added requests to it, since the last failure exit is exactly the failure to make ctx visible to lookups. Reproducer (based on one by Joe Mario <jmario@redhat.com>): void count(char *p) { char s[80]; printf("%s: ", p); fflush(stdout); sprintf(s, "/bin/cat /proc/%d/maps|/bin/fgrep -c '/[aio] (deleted)'", getpid()); system(s); } int main() { io_context_t *ctx; int created, limit, i, destroyed; FILE *f; count("before"); if ((f = fopen("/proc/sys/fs/aio-max-nr", "r")) == NULL) perror("opening aio-max-nr"); else if (fscanf(f, "%d", &limit) != 1) fprintf(stderr, "can't parse aio-max-nr\n"); else if ((ctx = calloc(limit, sizeof(io_context_t))) == NULL) perror("allocating aio_context_t array"); else { for (i = 0, created = 0; i < limit; i++) { if (io_setup(1000, ctx + created) == 0) created++; } for (i = 0, destroyed = 0; i < created; i++) if (io_destroy(ctx[i]) == 0) destroyed++; printf("created %d, failed %d, destroyed %d\n", created, limit - created, destroyed); count("after"); } } Found-by: Joe Mario <jmario@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-06fix mremap() vs. ioctx_kill() raceAl Viro
teach ->mremap() method to return an error and have it fail for aio mappings in process of being killed Note that in case of ->mremap() failure we need to undo move_page_tables() we'd already done; we could call ->mremap() first, but then the failure of move_page_tables() would require undoing whatever _successful_ ->mremap() has done, which would be a lot more headache in general. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-06net/mlx4_core: Fix error message deprecation for ConnectX-2 cardsJack Morgenstein
Commit 1daa4303b4ca ("net/mlx4_core: Deprecate error message at ConnectX-2 cards startup to debug") did the deprecation only for port 1 of the card. Need to deprecate for port 2 as well. Fixes: 1daa4303b4ca ("net/mlx4_core: Deprecate error message at ConnectX-2 cards startup to debug") Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-06net: dsa: fix filling routing table from OF descriptionPavel Nakonechny
According to description in 'include/net/dsa.h', in cascade switches configurations where there are more than one interconnected devices, 'rtable' array in 'dsa_chip_data' structure is used to indicate which port on this switch should be used to send packets to that are destined for corresponding switch. However, dsa_of_setup_routing_table() fills 'rtable' with port numbers of the _target_ switch, but not current one. This commit removes redundant devicetree parsing and adds needed port number as a function argument. So dsa_of_setup_routing_table() now just looks for target switch number by parsing parent of 'link' device node. To remove possible misunderstandings with the way of determining target switch number, a corresponding comment was added to the source code and to the DSA device tree bindings documentation file. This was tested on a custom board with two Marvell 88E6095 switches with following corresponding routing tables: { -1, 10 } and { 8, -1 }. Signed-off-by: Pavel Nakonechny <pavel.nakonechny@skitlab.ru> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-10-01 07:55:46 +0000