summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2025-05-14dmaengine: idxd: Add missing idxd cleanup to fix memory leak in remove callShuai Xue
The remove call stack is missing idxd cleanup to free bitmap, ida and the idxd_device. Call idxd_free() helper routines to make sure we exit gracefully. Fixes: bfe1d56091c1 ("dmaengine: idxd: Init and probe for Intel data accelerators") Cc: stable@vger.kernel.org Suggested-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com> Reviewed-by: Fenghua Yu <fenghuay@nvidia.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/20250404120217.48772-9-xueshuai@linux.alibaba.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2025-05-14dmaengine: idxd: fix memory leak in error handling path of idxd_pci_probeShuai Xue
Memory allocated for idxd is not freed if an error occurs during idxd_pci_probe(). To fix it, free the allocated memory in the reverse order of allocation before exiting the function in case of an error. Fixes: bfe1d56091c1 ("dmaengine: idxd: Init and probe for Intel data accelerators") Cc: stable@vger.kernel.org Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Fenghua Yu <fenghuay@nvidia.com> Link: https://lore.kernel.org/r/20250404120217.48772-8-xueshuai@linux.alibaba.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2025-05-14dmaengine: idxd: fix memory leak in error handling path of idxd_allocShuai Xue
Memory allocated for idxd is not freed if an error occurs during idxd_alloc(). To fix it, free the allocated memory in the reverse order of allocation before exiting the function in case of an error. Fixes: a8563a33a5e2 ("dmanegine: idxd: reformat opcap output to match bitmap_parse() input") Cc: stable@vger.kernel.org Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Fenghua Yu <fenghuay@nvidia.com> Link: https://lore.kernel.org/r/20250404120217.48772-7-xueshuai@linux.alibaba.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2025-05-14dmaengine: idxd: Add missing cleanups in cleanup internalsShuai Xue
The idxd_cleanup_internals() function only decreases the reference count of groups, engines, and wqs but is missing the step to release memory resources. To fix this, use the cleanup helper to properly release the memory resources. Fixes: ddf742d4f3f1 ("dmaengine: idxd: Add missing cleanup for early error out in probe call") Cc: stable@vger.kernel.org Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com> Reviewed-by: Fenghua Yu <fenghuay@nvidia.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/20250404120217.48772-6-xueshuai@linux.alibaba.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2025-05-14dmaengine: idxd: Add missing cleanup for early error out in idxd_setup_internalsShuai Xue
The idxd_setup_internals() is missing some cleanup when things fail in the middle. Add the appropriate cleanup routines: - cleanup groups - cleanup enginces - cleanup wqs to make sure it exits gracefully. Fixes: defe49f96012 ("dmaengine: idxd: fix group conf_dev lifetime") Cc: stable@vger.kernel.org Suggested-by: Fenghua Yu <fenghuay@nvidia.com> Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com> Reviewed-by: Fenghua Yu <fenghuay@nvidia.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/20250404120217.48772-5-xueshuai@linux.alibaba.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2025-05-14dmaengine: idxd: fix memory leak in error handling path of idxd_setup_groupsShuai Xue
Memory allocated for groups is not freed if an error occurs during idxd_setup_groups(). To fix it, free the allocated memory in the reverse order of allocation before exiting the function in case of an error. Fixes: defe49f96012 ("dmaengine: idxd: fix group conf_dev lifetime") Cc: stable@vger.kernel.org Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Fenghua Yu <fenghuay@nvidia.com> Link: https://lore.kernel.org/r/20250404120217.48772-4-xueshuai@linux.alibaba.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2025-05-14dmaengine: idxd: fix memory leak in error handling path of idxd_setup_enginesShuai Xue
Memory allocated for engines is not freed if an error occurs during idxd_setup_engines(). To fix it, free the allocated memory in the reverse order of allocation before exiting the function in case of an error. Fixes: 75b911309060 ("dmaengine: idxd: fix engine conf_dev lifetime") Cc: stable@vger.kernel.org Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Fenghua Yu <fenghuay@nvidia.com> Link: https://lore.kernel.org/r/20250404120217.48772-3-xueshuai@linux.alibaba.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2025-05-14dmaengine: idxd: fix memory leak in error handling path of idxd_setup_wqsShuai Xue
Memory allocated for wqs is not freed if an error occurs during idxd_setup_wqs(). To fix it, free the allocated memory in the reverse order of allocation before exiting the function in case of an error. Fixes: 7c5dd23e57c1 ("dmaengine: idxd: fix wq conf_dev 'struct device' lifetime") Fixes: 700af3a0a26c ("dmaengine: idxd: add 'struct idxd_dev' as wrapper for conf_dev") Fixes: de5819b99489 ("dmaengine: idxd: track enabled workqueues in bitmap") Fixes: b0325aefd398 ("dmaengine: idxd: add WQ operation cap restriction support") Cc: stable@vger.kernel.org Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Fenghua Yu <fenghuay@nvidia.com> Link: https://lore.kernel.org/r/20250404120217.48772-2-xueshuai@linux.alibaba.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2025-05-14xfs: Fix comment on xfs_trans_ail_update_bulk()Carlos Maiolino
This function doesn't take the AIL lock, but should be called with AIL lock held. Also (hopefuly) simplify the comment. Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Chandan Babu R <chandanbabu@kernel.org> Signed-off-by: Carlos Maiolino <cem@kernel.org>
2025-05-14xfs: Fix a comment on xfs_ail_deleteCarlos Maiolino
It doesn't return anything. Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com> Reviewed-by: Chandan Babu R <chandanbabu@kernel.org> Signed-off-by: Carlos Maiolino <cem@kernel.org>
2025-05-14xfs: Fail remount with noattr2 on a v5 with v4 enabledNirjhar Roy (IBM)
Bug: When we compile the kernel with CONFIG_XFS_SUPPORT_V4=y, remount with "-o remount,noattr2" on a v5 XFS does not fail explicitly. Reproduction: mkfs.xfs -f /dev/loop0 mount /dev/loop0 /mnt/scratch mount -o remount,noattr2 /dev/loop0 /mnt/scratch However, with CONFIG_XFS_SUPPORT_V4=n, the remount correctly fails explicitly. This is because the way the following 2 functions are defined: static inline bool xfs_has_attr2 (struct xfs_mount *mp) { return !IS_ENABLED(CONFIG_XFS_SUPPORT_V4) || (mp->m_features & XFS_FEAT_ATTR2); } static inline bool xfs_has_noattr2 (const struct xfs_mount *mp) { return mp->m_features & XFS_FEAT_NOATTR2; } xfs_has_attr2() returns true when CONFIG_XFS_SUPPORT_V4=n and hence, the following if condition in xfs_fs_validate_params() succeeds and returns -EINVAL: /* * We have not read the superblock at this point, so only the attr2 * mount option can set the attr2 feature by this stage. */ if (xfs_has_attr2(mp) && xfs_has_noattr2(mp)) { xfs_warn(mp, "attr2 and noattr2 cannot both be specified."); return -EINVAL; } With CONFIG_XFS_SUPPORT_V4=y, xfs_has_attr2() always return false and hence no error is returned. Fix: Check if the existing mount has crc enabled(i.e, of type v5 and has attr2 enabled) and the remount has noattr2, if yes, return -EINVAL. I have tested xfs/{189,539} in fstests with v4 and v5 XFS with both CONFIG_XFS_SUPPORT_V4=y/n and they both behave as expected. This patch also fixes remount from noattr2 -> attr2 (on a v4 xfs). Related discussion in [1] [1] https://lore.kernel.org/all/Z65o6nWxT00MaUrW@dread.disaster.area/ Signed-off-by: Nirjhar Roy (IBM) <nirjhar.roy.lists@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Signed-off-by: Carlos Maiolino <cem@kernel.org>
2025-05-14xfs: fix zoned GC data corruption due to wrong bv_offsetChristoph Hellwig
xfs_zone_gc_write_chunk writes out the data buffer read in earlier using the same bio, and currenly looks at bv_offset for the offset into the scratch folio for that. But commit 26064d3e2b4d ("block: fix adding folio to bio") changed how bv_page and bv_offset are calculated for adding larger folios, breaking this fragile logic. Switch to extracting the full physical address from the old bio_vec, and calculate the offset into the folio from that instead. This fixes data corruption during garbage collection with heavy rockdsb workloads. Thanks to Hans for tracking down the culprit commit during long bisection sessions. Fixes: 26064d3e2b4d ("block: fix adding folio to bio") Fixes: 080d01c41d44 ("xfs: implement zoned garbage collection") Reported-by: Hans Holmberg <Hans.Holmberg@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hans Holmberg <Hans.Holmberg@wdc.com> Tested-by: Hans Holmberg <Hans.Holmberg@wdc.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Carlos Maiolino <cem@kernel.org>
2025-05-14xfs: free up mp->m_free[0].count in error caseWengang Wang
In xfs_init_percpu_counters(), memory for mp->m_free[0].count wasn't freed in error case. Free it up in this patch. Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com> Fixes: 712bae96631852 ("xfs: generalize the freespace and reserved blocks handling") Reviewed-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Carlos Maiolino <cem@kernel.org>
2025-05-14dma-buf: insert memory barrier before updating num_fencesHyejeong Choi
smp_store_mb() inserts memory barrier after storing operation. It is different with what the comment is originally aiming so Null pointer dereference can be happened if memory update is reordered. Signed-off-by: Hyejeong Choi <hjeong.choi@samsung.com> Fixes: a590d0fdbaa5 ("dma-buf: Update reservation shared_count after adding the new fence") CC: stable@vger.kernel.org Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://lore.kernel.org/r/20250513020638.GA2329653@au1-maretx-p37.eng.sarc.samsung.com Signed-off-by: Christian König <christian.koenig@amd.com>
2025-05-14nvme: all namespaces in a subsystem must adhere to a common atomic write sizeAlan Adamson
The first namespace configured in a subsystem sets the subsystem's atomic write size based on its AWUPF or NAWUPF. Subsequent namespaces must have an atomic write size (per their AWUPF or NAWUPF) less than or equal to the subsystem's atomic write size, or their probing will be rejected. Signed-off-by: Alan Adamson <alan.adamson@oracle.com> [hch: fold in review comments from John Garry] Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: John Garry <john.g.garry@oracle.com>
2025-05-14ASoC: amd: use new ACP dev names for DAI linksBrady Norander
On AMD SoC platforms with an ACP2x gpu ip block (such as stoneyridge), the amdgpu driver will create several platform devices for the ACP ASoC driver to communicate with the ACP hardware block on the gpu. These platform devices include dma for audio and one or multiple i2s interfaces. The amdgpu driver has always created these platform devices with automatic ids. The ASoC machine drives hardcode the platform device name. This creates an issue where if the ACP platform devices are not the first to be created, the ids can be different to what the machine drivers expect, causing them to not find the ACP platform devices and failing to load. Switch to using static ids for these ACP platform devices so that the names never change. Depends on patch: drm/amdgpu: use static ids for ACP platform devs [1] [1] https://lore.kernel.org/all/20250325210517.2097188-1-bradynorander@gmail.com/ Signed-off-by: Brady Norander <bradynorander@gmail.com> Link: https://patch.msgid.link/20250330130844.37870-2-bradynorander@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-05-14ASoC: dt-bindings: mediatek: Simplify mediatek,clk-providerKrzysztof Kozlowski
"mediatek,clk-provider" property is a string, not an string array, thus "items" is not really correct. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://patch.msgid.link/20250514105702.28622-2-krzysztof.kozlowski@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2025-05-14ASoC: intel/sdw_utils: Assign initial value in asoc_sdw_rt_amp_spk_rtd_init()I Hsin Cheng
Initialize "ret" with "-EINVAL" to handle cases where "strstr()" for "codec_dai->component->name_prefix" doesn't find "-1" nor "-2". In that case "name_prefix" is invalid because for current implementation it's expected to have either "-1" or "-2" in it. (Maybe "-3", "-4" and so on in the future.) Link: https://scan5.scan.coverity.com/#/project-view/36179/10063?selectedIssue=1627120 Signed-off-by: I Hsin Cheng <richard120310@gmail.com> Link: https://patch.msgid.link/20250505185423.680608-1-richard120310@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-05-14io_uring/fdinfo: grab ctx->uring_lock around io_uring_show_fdinfo()Jens Axboe
Not everything requires locking in there, which is why the 'has_lock' variable exists. But enough does that it's a bit unwieldy to manage. Wrap the whole thing in a ->uring_lock trylock, and just return with no output if we fail to grab it. The existing trylock() will already have greatly diminished utility/output for the failure case. This fixes an issue with reading the SQE fields, if the ring is being actively resized at the same time. Reported-by: Jann Horn <jannh@google.com> Fixes: 79cfe9e59c2a ("io_uring/register: add IORING_REGISTER_RESIZE_RINGS") Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-05-14phy: Fix error handling in tegra_xusb_port_initMa Ke
If device_add() fails, do not use device_unregister() for error handling. device_unregister() consists two functions: device_del() and put_device(). device_unregister() should only be called after device_add() succeeded because device_del() undoes what device_add() does if successful. Change device_unregister() to put_device() call before returning from the function. As comment of device_add() says, 'if device_add() succeeds, you should call device_del() when you want to get rid of it. If device_add() has not succeeded, use only put_device() to drop the reference count'. Found by code review. Cc: stable@vger.kernel.org Fixes: 53d2a715c240 ("phy: Add Tegra XUSB pad controller support") Signed-off-by: Ma Ke <make24@iscas.ac.cn> Acked-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20250303072739.3874987-1-make24@iscas.ac.cn Signed-off-by: Vinod Koul <vkoul@kernel.org>
2025-05-14phy: renesas: rcar-gen3-usb2: Set timing registers only onceClaudiu Beznea
phy-rcar-gen3-usb2 driver exports 4 PHYs. The timing registers are common to all PHYs. There is no need to set them every time a PHY is initialized. Set timing register only when the 1st PHY is initialized. Fixes: f3b5a8d9b50d ("phy: rcar-gen3-usb2: Add R-Car Gen3 USB2 PHY driver") Cc: stable@vger.kernel.org Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Link: https://lore.kernel.org/r/20250507125032.565017-6-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2025-05-14phy: renesas: rcar-gen3-usb2: Assert PLL reset on PHY power offClaudiu Beznea
Assert PLL reset on PHY power off. This saves power. Fixes: f3b5a8d9b50d ("phy: rcar-gen3-usb2: Add R-Car Gen3 USB2 PHY driver") Cc: stable@vger.kernel.org Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Link: https://lore.kernel.org/r/20250507125032.565017-5-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2025-05-14phy: renesas: rcar-gen3-usb2: Lock around hardware registers and driver dataClaudiu Beznea
The phy-rcar-gen3-usb2 driver exposes four individual PHYs that are requested and configured by PHY users. The struct phy_ops APIs access the same set of registers to configure all PHYs. Additionally, PHY settings can be modified through sysfs or an IRQ handler. While some struct phy_ops APIs are protected by a driver-wide mutex, others rely on individual PHY-specific mutexes. This approach can lead to various issues, including: 1/ the IRQ handler may interrupt PHY settings in progress, racing with hardware configuration protected by a mutex lock 2/ due to msleep(20) in rcar_gen3_init_otg(), while a configuration thread suspends to wait for the delay, another thread may try to configure another PHY (with phy_init() + phy_power_on()); re-running the phy_init() goes to the exact same configuration code, re-running the same hardware configuration on the same set of registers (and bits) which might impact the result of the msleep for the 1st configuring thread 3/ sysfs can configure the hardware (though role_store()) and it can still race with the phy_init()/phy_power_on() APIs calling into the drivers struct phy_ops To address these issues, add a spinlock to protect hardware register access and driver private data structures (e.g., calls to rcar_gen3_is_any_rphy_initialized()). Checking driver-specific data remains necessary as all PHY instances share common settings. With this change, the existing mutex protection is removed and the cleanup.h helpers are used. While at it, to keep the code simpler, do not skip regulator_enable()/regulator_disable() APIs in rcar_gen3_phy_usb2_power_on()/rcar_gen3_phy_usb2_power_off() as the regulators enable/disable operations are reference counted anyway. Fixes: f3b5a8d9b50d ("phy: rcar-gen3-usb2: Add R-Car Gen3 USB2 PHY driver") Cc: stable@vger.kernel.org Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Link: https://lore.kernel.org/r/20250507125032.565017-4-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2025-05-14phy: renesas: rcar-gen3-usb2: Move IRQ request in probeClaudiu Beznea
Commit 08b0ad375ca6 ("phy: renesas: rcar-gen3-usb2: move IRQ registration to init") moved the IRQ request operation from probe to struct phy_ops::phy_init API to avoid triggering interrupts (which lead to register accesses) while the PHY clocks (enabled through runtime PM APIs) are not active. If this happens, it results in a synchronous abort. One way to reproduce this issue is by enabling CONFIG_DEBUG_SHIRQ, which calls free_irq() on driver removal. Move the IRQ request and free operations back to probe, and take the runtime PM state into account in IRQ handler. This commit is preparatory for the subsequent fixes in this series. Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Link: https://lore.kernel.org/r/20250507125032.565017-3-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2025-05-14phy: renesas: rcar-gen3-usb2: Fix role detection on unbind/bindClaudiu Beznea
It has been observed on the Renesas RZ/G3S SoC that unbinding and binding the PHY driver leads to role autodetection failures. This issue occurs when PHY 3 is the first initialized PHY. PHY 3 does not have an interrupt associated with the USB2_INT_ENABLE register (as rcar_gen3_int_enable[3] = 0). As a result, rcar_gen3_init_otg() is called to initialize OTG without enabling PHY interrupts. To resolve this, add rcar_gen3_is_any_otg_rphy_initialized() and call it in role_store(), role_show(), and rcar_gen3_init_otg(). At the same time, rcar_gen3_init_otg() is only called when initialization for a PHY with interrupt bits is in progress. As a result, the struct rcar_gen3_phy::otg_initialized is no longer needed. Fixes: 549b6b55b005 ("phy: renesas: rcar-gen3-usb2: enable/disable independent irqs") Cc: stable@vger.kernel.org Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Link: https://lore.kernel.org/r/20250507125032.565017-2-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2025-05-14phy: tegra: xusb: remove a stray unlockDan Carpenter
We used to take a lock in tegra186_utmi_bias_pad_power_on() but now we have moved the lock into the caller. Unfortunately, when we moved the lock this unlock was left behind and it results in a double unlock. Delete it now. Fixes: b47158fb4295 ("phy: tegra: xusb: Use a bitmask for UTMI pad power state tracking") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Link: https://lore.kernel.org/r/aAjmR6To4EnvRl4G@stanley.mountain Signed-off-by: Vinod Koul <vkoul@kernel.org>
2025-05-14ALSA: es1968: Add error handling for snd_pcm_hw_constraint_pow2()Wentao Liang
The function snd_es1968_capture_open() calls the function snd_pcm_hw_constraint_pow2(), but does not check its return value. A proper implementation can be found in snd_cx25821_pcm_open(). Add error handling for snd_pcm_hw_constraint_pow2() and propagate its error code. Fixes: b942cf815b57 ("[ALSA] es1968 - Fix stuttering capture") Cc: stable@vger.kernel.org # v2.6.22 Signed-off-by: Wentao Liang <vulab@iscas.ac.cn> Link: https://patch.msgid.link/20250514092444.331-1-vulab@iscas.ac.cn Signed-off-by: Takashi Iwai <tiwai@suse.de>
2025-05-14ASoC: dt-bindings: Add Everest ES8389 audio CODECZhang Yi
Add device tree binding documentation for Everest ES8389 which is different from ES8388 Signed-off-by: Zhang Yi <zhangyi@everest-semi.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://patch.msgid.link/20250514094546.35508-3-zhangyi@everest-semi.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-05-14ASoC: codecs: add support for ES8389Zhang Yi
The driver is for codec es8389 of everest which is different from ES8388 Signed-off-by: Zhang Yi <zhangyi@everest-semi.com> Link: https://patch.msgid.link/20250514094546.35508-2-zhangyi@everest-semi.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-05-14octeontx2-pf: Fix ethtool support for SDP representorsHariprasad Kelam
The hardware supports multiple MAC types, including RPM, SDP, and LBK. However, features such as link settings and pause frames are only available on RPM MAC, and not supported on SDP or LBK. This patch updates the ethtool operations logic accordingly to reflect this behavior. Fixes: 2f7f33a09516 ("octeontx2-pf: Add representors for sdp MAC") Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2025-05-14regulator: max20086: fix invalid memory accessCosmin Tanislav
max20086_parse_regulators_dt() calls of_regulator_match() using an array of struct of_regulator_match allocated on the stack for the matches argument. of_regulator_match() calls devm_of_regulator_put_matches(), which calls devres_alloc() to allocate a struct devm_of_regulator_matches which will be de-allocated using devm_of_regulator_put_matches(). struct devm_of_regulator_matches is populated with the stack allocated matches array. If the device fails to probe, devm_of_regulator_put_matches() will be called and will try to call of_node_put() on that stack pointer, generating the following dmesg entries: max20086 6-0028: Failed to read DEVICE_ID reg: -121 kobject: '\xc0$\xa5\x03' (000000002cebcb7a): is not initialized, yet kobject_put() is being called. Followed by a stack trace matching the call flow described above. Switch to allocating the matches array using devm_kcalloc() to avoid accessing the stack pointer long after it's out of scope. This also has the advantage of allowing multiple max20086 to probe without overriding the data stored inside the global of_regulator_match. Fixes: bfff546aae50 ("regulator: Add MAX20086-MAX20089 driver") Signed-off-by: Cosmin Tanislav <demonsingur@gmail.com> Link: https://patch.msgid.link/20250508064947.2567255-1-demonsingur@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-05-14ALSA: hda: cs35l56: Log tuning unique identifiers during firmware loadSimon Trimmer
The cs35l56 smart amplifier has some informational firmware controls that are populated by a tuning bin file to unique values - logging these during firmware load identifies the specific configuration being used on that device instance. Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com> Acked-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/2fcc0e6fc5b8669acb026bebe44a4995ac83b967.1747142267.git.simont@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-05-14ASoC: cs35l56: Log tuning unique identifiers during firmware loadSimon Trimmer
The cs35l56 smart amplifier has some informational firmware controls that are populated by a tuning bin file to unique values - logging these during firmware load identifies the specific configuration being used on that device instance. Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com> Link: https://patch.msgid.link/47762a5f1ce2b178ad863c6698296aea09b72e10.1747142267.git.simont@opensource.cirrus.com Acked-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2025-05-14spi: spi-sun4i: fix early activationAlessandro Grassi
The SPI interface is activated before the CPOL setting is applied. In that moment, the clock idles high and CS goes low. After a short delay, CPOL and other settings are applied, which may cause the clock to change state and idle low. This transition is not part of a clock cycle, and it can confuse the receiving device. To prevent this unexpected transition, activate the interface while CPOL and the other settings are being applied. Signed-off-by: Alessandro Grassi <alessandro.grassi@mailbox.org> Link: https://patch.msgid.link/20250502095520.13825-1-alessandro.grassi@mailbox.org Signed-off-by: Mark Brown <broonie@kernel.org>
2025-05-14phy: phy-rockchip-samsung-hdptx: Fix PHY PLL output 50.25MHz errorAlgea Cao
When using HDMI PLL frequency division coefficient at 50.25MHz that is calculated by rk_hdptx_phy_clk_pll_calc(), it fails to get PHY LANE lock. Although the calculated values are within the allowable range of PHY PLL configuration. In order to fix the PHY LANE lock error and provide the expected 50.25MHz output, manually compute the required PHY PLL frequency division coefficient and add it to ropll_tmds_cfg configuration table. Signed-off-by: Algea Cao <algea.cao@rock-chips.com> Reviewed-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20250427095124.3354439-1-algea.cao@rock-chips.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2025-05-14phy: starfive: jh7110-usb: Fix USB 2.0 host occasional detection failureHal Feng
JH7110 USB 2.0 host fails to detect USB 2.0 devices occasionally. With a long time of debugging and testing, we found that setting Rx clock gating control signal to normal power consumption mode can solve this problem. Signed-off-by: Hal Feng <hal.feng@starfivetech.com> Link: https://lore.kernel.org/r/20250422101244.51686-1-hal.feng@starfivetech.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2025-05-14ASoC: tegra210_ahub: Add check to of_device_get_match_data()Yuanjun Gong
In tegra_ahub_probe(), check the result of function of_device_get_match_data(), return an error code in case it fails. Signed-off-by: Yuanjun Gong <ruc_gongyuanjun@163.com> Link: https://patch.msgid.link/20250513123744.3041724-1-ruc_gongyuanjun@163.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-05-14nvme: multipath: enable BLK_FEAT_ATOMIC_WRITES for multipathingAlan Adamson
A change to QEMU resulted in all nvme controllers (single and multi-controller subsystems) to have its CMIC.MCTRS bit set which indicates the subsystem supports multiple controllers and it is possible a namespace can be shared between those multiple controllers in a multipath configuration. When a namespace of a CMIC.MCTRS enabled subsystem is allocated, a multipath node is created. The queue limits for this node are inherited from the namespace being allocated. When inheriting queue limits, the features being inherited need to be specified. The atomic write feature (BLK_FEAT_ATOMIC_WRITES) was not specified so the atomic queue limits were not inherited by the multipath disk node which resulted in the sysfs atomic write attributes being zeroed. The fix is to include BLK_FEAT_ATOMIC_WRITES in the list of features to be inherited. Signed-off-by: Alan Adamson <alan.adamson@oracle.com> Reviewed-by: John Garry <john.g.garry@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2025-05-13qlcnic: fix memory leak in qlcnic_sriov_channel_cfg_cmd()Abdun Nihaal
In one of the error paths in qlcnic_sriov_channel_cfg_cmd(), the memory allocated in qlcnic_sriov_alloc_bc_mbx_args() for mailbox arguments is not freed. Fix that by jumping to the error path that frees them, by calling qlcnic_free_mbx_args(). This was found using static analysis. Fixes: f197a7aa6288 ("qlcnic: VF-PF communication channel implementation") Signed-off-by: Abdun Nihaal <abdun.nihaal@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250512044829.36400-1-abdun.nihaal@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-13docs: networking: timestamping: improve stacked PHC sentenceVladimir Oltean
The first paragraph makes no grammatical sense. I suppose a portion of the intended sentece is missing: "[The challenge with ] stacked PHCs (...) is that they uncover bugs". Rephrase, and at the same time simplify the structure of the sentence a little bit, it is not easy to follow. Fixes: 94d9f78f4d64 ("docs: networking: timestamping: add section for stacked PHC devices") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Link: https://patch.msgid.link/20250512131751.320283-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-13net/mlx5e: Disable MACsec offload for uplink representor profileCarolina Jubran
MACsec offload is not supported in switchdev mode for uplink representors. When switching to the uplink representor profile, the MACsec offload feature must be cleared from the netdevice's features. If left enabled, attempts to add offloads result in a null pointer dereference, as the uplink representor does not support MACsec offload even though the feature bit remains set. Clear NETIF_F_HW_MACSEC in mlx5e_fix_uplink_rep_features(). Kernel log: Oops: general protection fault, probably for non-canonical address 0xdffffc000000000f: 0000 [#1] SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000078-0x000000000000007f] CPU: 29 UID: 0 PID: 4714 Comm: ip Not tainted 6.14.0-rc4_for_upstream_debug_2025_03_02_17_35 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:__mutex_lock+0x128/0x1dd0 Code: d0 7c 08 84 d2 0f 85 ad 15 00 00 8b 35 91 5c fe 03 85 f6 75 29 49 8d 7e 60 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 a6 15 00 00 4d 3b 76 60 0f 85 fd 0b 00 00 65 ff RSP: 0018:ffff888147a4f160 EFLAGS: 00010206 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000001 RDX: 000000000000000f RSI: 0000000000000000 RDI: 0000000000000078 RBP: ffff888147a4f2e0 R08: ffffffffa05d2c19 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 R13: dffffc0000000000 R14: 0000000000000018 R15: ffff888152de0000 FS: 00007f855e27d800(0000) GS:ffff88881ee80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000004e5768 CR3: 000000013ae7c005 CR4: 0000000000372eb0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 Call Trace: <TASK> ? die_addr+0x3d/0xa0 ? exc_general_protection+0x144/0x220 ? asm_exc_general_protection+0x22/0x30 ? mlx5e_macsec_add_secy+0xf9/0x700 [mlx5_core] ? __mutex_lock+0x128/0x1dd0 ? lockdep_set_lock_cmp_fn+0x190/0x190 ? mlx5e_macsec_add_secy+0xf9/0x700 [mlx5_core] ? mutex_lock_io_nested+0x1ae0/0x1ae0 ? lock_acquire+0x1c2/0x530 ? macsec_upd_offload+0x145/0x380 ? lockdep_hardirqs_on_prepare+0x400/0x400 ? kasan_save_stack+0x30/0x40 ? kasan_save_stack+0x20/0x40 ? kasan_save_track+0x10/0x30 ? __kasan_kmalloc+0x77/0x90 ? __kmalloc_noprof+0x249/0x6b0 ? genl_family_rcv_msg_attrs_parse.constprop.0+0xb5/0x240 ? mlx5e_macsec_add_secy+0xf9/0x700 [mlx5_core] mlx5e_macsec_add_secy+0xf9/0x700 [mlx5_core] ? mlx5e_macsec_add_rxsa+0x11a0/0x11a0 [mlx5_core] macsec_update_offload+0x26c/0x820 ? macsec_set_mac_address+0x4b0/0x4b0 ? lockdep_hardirqs_on_prepare+0x284/0x400 ? _raw_spin_unlock_irqrestore+0x47/0x50 macsec_upd_offload+0x2c8/0x380 ? macsec_update_offload+0x820/0x820 ? __nla_parse+0x22/0x30 ? genl_family_rcv_msg_attrs_parse.constprop.0+0x15e/0x240 genl_family_rcv_msg_doit+0x1cc/0x2a0 ? genl_family_rcv_msg_attrs_parse.constprop.0+0x240/0x240 ? cap_capable+0xd4/0x330 genl_rcv_msg+0x3ea/0x670 ? genl_family_rcv_msg_dumpit+0x2a0/0x2a0 ? lockdep_set_lock_cmp_fn+0x190/0x190 ? macsec_update_offload+0x820/0x820 netlink_rcv_skb+0x12b/0x390 ? genl_family_rcv_msg_dumpit+0x2a0/0x2a0 ? netlink_ack+0xd80/0xd80 ? rwsem_down_read_slowpath+0xf90/0xf90 ? netlink_deliver_tap+0xcd/0xac0 ? netlink_deliver_tap+0x155/0xac0 ? _copy_from_iter+0x1bb/0x12c0 genl_rcv+0x24/0x40 netlink_unicast+0x440/0x700 ? netlink_attachskb+0x760/0x760 ? lock_acquire+0x1c2/0x530 ? __might_fault+0xbb/0x170 netlink_sendmsg+0x749/0xc10 ? netlink_unicast+0x700/0x700 ? __might_fault+0xbb/0x170 ? netlink_unicast+0x700/0x700 __sock_sendmsg+0xc5/0x190 ____sys_sendmsg+0x53f/0x760 ? import_iovec+0x7/0x10 ? kernel_sendmsg+0x30/0x30 ? __copy_msghdr+0x3c0/0x3c0 ? filter_irq_stacks+0x90/0x90 ? stack_depot_save_flags+0x28/0xa30 ___sys_sendmsg+0xeb/0x170 ? kasan_save_stack+0x30/0x40 ? copy_msghdr_from_user+0x110/0x110 ? do_syscall_64+0x6d/0x140 ? lock_acquire+0x1c2/0x530 ? __virt_addr_valid+0x116/0x3b0 ? __virt_addr_valid+0x1da/0x3b0 ? lock_downgrade+0x680/0x680 ? __delete_object+0x21/0x50 __sys_sendmsg+0xf7/0x180 ? __sys_sendmsg_sock+0x20/0x20 ? kmem_cache_free+0x14c/0x4e0 ? __x64_sys_close+0x78/0xd0 do_syscall_64+0x6d/0x140 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7f855e113367 Code: 0e 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b9 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10 RSP: 002b:00007ffd15e90c88 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f855e113367 RDX: 0000000000000000 RSI: 00007ffd15e90cf0 RDI: 0000000000000004 RBP: 00007ffd15e90dbc R08: 0000000000000028 R09: 000000000045d100 R10: 00007f855e011dd8 R11: 0000000000000246 R12: 0000000000000019 R13: 0000000067c6b785 R14: 00000000004a1e80 R15: 0000000000000000 </TASK> Modules linked in: 8021q garp mrp sch_ingress openvswitch nsh mlx5_ib mlx5_fwctl mlx5_dpll mlx5_core rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm ib_uverbs ib_core xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcgss oid_registry overlay zram zsmalloc fuse [last unloaded: mlx5_core] ---[ end trace 0000000000000000 ]--- Fixes: 8ff0ac5be144 ("net/mlx5: Add MACsec offload Tx command support") Signed-off-by: Carolina Jubran <cjubran@nvidia.com> Reviewed-by: Shahar Shitrit <shshitrit@nvidia.com> Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/1746958552-561295-1-git-send-email-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-13vsock/test: Fix occasional failure in SIOCOUTQ testsKonstantin Shkolnyy
These tests: "SOCK_STREAM ioctl(SIOCOUTQ) 0 unsent bytes" "SOCK_SEQPACKET ioctl(SIOCOUTQ) 0 unsent bytes" output: "Unexpected 'SIOCOUTQ' value, expected 0, got 64 (CLIENT)". They test that the SIOCOUTQ ioctl reports 0 unsent bytes after the data have been received by the other side. However, sometimes there is a delay in updating this "unsent bytes" counter, and the test fails even though the counter properly goes to 0 several milliseconds later. The delay occurs in the kernel because the used buffer notification callback virtio_vsock_tx_done(), called upon receipt of the data by the other side, doesn't update the counter itself. It delegates that to a kernel thread (via vsock->tx_work). Sometimes that thread is delayed more than the test expects. Change the test to poll SIOCOUTQ until it returns 0 or a timeout occurs. Signed-off-by: Konstantin Shkolnyy <kshk@linux.ibm.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Fixes: 18ee44ce97c1 ("test/vsock: add ioctl unsent bytes test") Link: https://patch.msgid.link/20250507151456.2577061-1-kshk@linux.ibm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-13tools: ynl-gen: Allow multi-attr without nested-attributes againLukas Wunner
Since commit ce6cb8113c84 ("tools: ynl-gen: individually free previous values on double set"), specifying the "multi-attr" property raises an error unless the "nested-attributes" property is specified as well: File "tools/net/ynl/./pyynl/ynl_gen_c.py", line 1147, in _load_nested_sets child = self.pure_nested_structs.get(nested) ^^^^^^ UnboundLocalError: cannot access local variable 'nested' where it is not associated with a value This appears to be a bug since there are existing specs which omit "nested-attributes" on "multi-attr" attributes. Also, according to Documentation/userspace-api/netlink/specs.rst, multi-attr "is the recommended way of implementing arrays (no extra nesting)", suggesting that nesting should even be avoided in favor of multi-attr. Fix the indentation of the if-block introduced by the commit to avoid the error. Fixes: ce6cb8113c84 ("tools: ynl-gen: individually free previous values on double set") Signed-off-by: Lukas Wunner <lukas@wunner.de> Link: https://patch.msgid.link/d6b58684b7e5bfb628f7313e6893d0097904e1d1.1746940107.git.lukas@wunner.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-13x86/its: Fix build errors when CONFIG_MODULES=nEric Biggers
Fix several build errors when CONFIG_MODULES=n, including the following: ../arch/x86/kernel/alternative.c:195:25: error: incomplete definition of type 'struct module' 195 | for (int i = 0; i < mod->its_num_pages; i++) { Fixes: 872df34d7c51 ("x86/its: Use dynamic thunks for indirect branches") Cc: stable@vger.kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com> Acked-by: Dave Hansen <dave.hansen@intel.com> Tested-by: Steven Rostedt (Google) <rostedt@goodmis.org> Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2025-05-13x86/CPU/AMD: Add X86_FEATURE_ZEN6Yazen Ghannam
Add a synthetic feature flag for Zen6. [ bp: Move the feature flag to a free slot and avoid future merge conflicts from incoming stuff. ] Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/20250513204857.3376577-1-yazen.ghannam@amd.com
2025-05-13drm/xe: Fix the gem shrinker nameThomas Hellström
The xe buffer object shrinker name is visible in the <debugfs>/shrinker directory and most if not all other shinkers follow a naming convention that looks like <subsystem>-<driver>_<objects>:<unique> Follow the same convention for xe, changing the name to drm-xe_gem:<unique>. Other shrinkers typically use the device node for <unique> but since drm drivers typically don't have a single unique device- node, instead use the unique name in the drm device. Fixes: 00c8efc3180f ("drm/xe: Add a shrinker for xe bos") Cc: Matthew Brost <matthew.brost@intel.com> Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by: Francois Dugast <francois.dugast@intel.com> Link: https://lore.kernel.org/r/20250508112931.3347-1-thomas.hellstrom@linux.intel.com (cherry picked from commit 243bf99e2fe75edf8df1711c1377b6fc020b806c) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2025-05-13Merge tag 'probes-fixes-v6.15-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull probes fixes from Masami Hiramatsu: - fprobe: Fix RCU warning message in list traversal fprobe_module_callback() using hlist_for_each_entry_rcu() traverse the fprobe list but it locks fprobe_mutex() instead of rcu lock because it is enough. So add lockdep_is_held() to avoid warning. - tracing: eprobe: Add missing trace_probe_log_clear for eprobe __trace_eprobe_create() uses trace_probe_log but forgot to clear it at exit. Add trace_probe_log_clear() calls. - tracing: probes: Fix possible race in trace_probe_log APIs trace_probe_log APIs are used in probe event (dynamic_events, kprobe_events and uprobe_events) creation. Only dynamic_events uses the dyn_event_ops_mutex mutex to serialize it. This makes kprobe and uprobe events to lock the same mutex to serialize its creation to avoid race in trace_probe_log APIs. * tag 'probes-fixes-v6.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: tracing: probes: Fix a possible race in trace_probe_log APIs tracing: add missing trace_probe_log_clear for eprobes tracing: fprobe: Fix RCU warning message in list traversal
2025-05-13drm/amd/display: Avoid flooding unnecessary info messagesWayne Lin
It's expected that we'll encounter temporary exceptions during aux transactions. Adjust logging from drm_info to drm_dbg_dp to prevent flooding with unnecessary log messages. Fixes: 3637e457eb00 ("drm/amd/display: Fix wrong handling for AUX_DEFER case") Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Link: https://lore.kernel.org/r/20250513032026.838036-1-Wayne.Lin@amd.com Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 9a9c3e1fe5256da14a0a307dff0478f90c55fc8c) Cc: stable@vger.kernel.org
2025-05-13drm/amd/display: Fix null check of pipe_ctx->plane_state for update_dchubp_dppMelissa Wen
Similar to commit 6a057072ddd1 ("drm/amd/display: Fix null check for pipe_ctx->plane_state in dcn20_program_pipe") that addresses a null pointer dereference on dcn20_update_dchubp_dpp. This is the same function hooked for update_dchubp_dpp in dcn401, with the same issue. Fix possible null pointer deference on dcn401_program_pipe too. Fixes: 63ab80d9ac0a ("drm/amd/display: DML2.1 Post-Si Cleanup") Signed-off-by: Melissa Wen <mwen@igalia.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit d8d47f739752227957d8efc0cb894761bfe1d879)
2025-05-13drm/amd/display: check stream id dml21 wrapper to get plane_idAurabindo Pillai
[Why & How] Fix a false positive warning which occurs due to lack of correct checks when querying plane_id in DML21. This fixes the warning when performing a mode1 reset (cat /sys/kernel/debug/dri/1/amdgpu_gpu_recover): [ 35.751250] WARNING: CPU: 11 PID: 326 at /tmp/amd.PHpyAl7v/amd/amdgpu/../display/dc/dml2/dml2_dc_resource_mgmt.c:91 dml2_map_dc_pipes+0x243d/0x3f40 [amdgpu] [ 35.751434] Modules linked in: amdgpu(OE) amddrm_ttm_helper(OE) amdttm(OE) amddrm_buddy(OE) amdxcp(OE) amddrm_exec(OE) amd_sched(OE) amdkcl(OE) drm_suballoc_helper drm_ttm_helper ttm drm_display_helper cec rc_core i2c_algo_bit rfcomm qrtr cmac algif_hash algif_skcipher af_alg bnep amd_atl intel_rapl_msr intel_rapl_common snd_hda_codec_hdmi snd_hda_intel edac_mce_amd snd_intel_dspcfg snd_intel_sdw_acpi snd_hda_codec kvm_amd snd_hda_core snd_hwdep snd_pcm kvm snd_seq_midi snd_seq_midi_event snd_rawmidi crct10dif_pclmul polyval_clmulni polyval_generic btusb ghash_clmulni_intel sha256_ssse3 btrtl sha1_ssse3 snd_seq btintel aesni_intel btbcm btmtk snd_seq_device crypto_simd sunrpc cryptd bluetooth snd_timer ccp binfmt_misc rapl snd i2c_piix4 wmi_bmof gigabyte_wmi k10temp i2c_smbus soundcore gpio_amdpt mac_hid sch_fq_codel msr parport_pc ppdev lp parport efi_pstore nfnetlink dmi_sysfs ip_tables x_tables autofs4 hid_generic usbhid hid crc32_pclmul igc ahci xhci_pci libahci xhci_pci_renesas video wmi [ 35.751501] CPU: 11 UID: 0 PID: 326 Comm: kworker/u64:9 Tainted: G OE 6.11.0-21-generic #21~24.04.1-Ubuntu [ 35.751504] Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE [ 35.751505] Hardware name: Gigabyte Technology Co., Ltd. X670E AORUS PRO X/X670E AORUS PRO X, BIOS F30 05/22/2024 [ 35.751506] Workqueue: amdgpu-reset-dev amdgpu_debugfs_reset_work [amdgpu] [ 35.751638] RIP: 0010:dml2_map_dc_pipes+0x243d/0x3f40 [amdgpu] [ 35.751794] Code: 6d 0c 00 00 8b 84 24 88 00 00 00 41 3b 44 9c 20 0f 84 fc 07 00 00 48 83 c3 01 48 83 fb 06 75 b3 4c 8b 64 24 68 4c 8b 6c 24 40 <0f> 0b b8 06 00 00 00 49 8b 94 24 a0 49 00 00 89 c3 83 f8 07 0f 87 [ 35.751796] RSP: 0018:ffffbfa3805d7680 EFLAGS: 00010246 [ 35.751798] RAX: 0000000000010000 RBX: 0000000000000006 RCX: 0000000000000000 [ 35.751799] RDX: 0000000000000000 RSI: 0000000000000005 RDI: 0000000000000000 [ 35.751800] RBP: ffffbfa3805d78f0 R08: 0000000000000000 R09: 0000000000000000 [ 35.751801] R10: 0000000000000000 R11: 0000000000000000 R12: ffffbfa383249000 [ 35.751802] R13: ffffa0e68f280000 R14: ffffbfa383249658 R15: 0000000000000000 [ 35.751803] FS: 0000000000000000(0000) GS:ffffa0edbe580000(0000) knlGS:0000000000000000 [ 35.751804] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 35.751805] CR2: 00005d847ef96c58 CR3: 000000041de3e000 CR4: 0000000000f50ef0 [ 35.751806] PKRU: 55555554 [ 35.751807] Call Trace: [ 35.751810] <TASK> [ 35.751816] ? show_regs+0x6c/0x80 [ 35.751820] ? __warn+0x88/0x140 [ 35.751822] ? dml2_map_dc_pipes+0x243d/0x3f40 [amdgpu] [ 35.751964] ? report_bug+0x182/0x1b0 [ 35.751969] ? handle_bug+0x6e/0xb0 [ 35.751972] ? exc_invalid_op+0x18/0x80 [ 35.751974] ? asm_exc_invalid_op+0x1b/0x20 [ 35.751978] ? dml2_map_dc_pipes+0x243d/0x3f40 [amdgpu] [ 35.752117] ? math_pow+0x48/0xa0 [amdgpu] [ 35.752256] ? srso_alias_return_thunk+0x5/0xfbef5 [ 35.752260] ? math_pow+0x48/0xa0 [amdgpu] [ 35.752400] ? srso_alias_return_thunk+0x5/0xfbef5 [ 35.752403] ? math_pow+0x11/0xa0 [amdgpu] [ 35.752524] ? srso_alias_return_thunk+0x5/0xfbef5 [ 35.752526] ? core_dcn4_mode_programming+0xe4d/0x20d0 [amdgpu] [ 35.752663] ? srso_alias_return_thunk+0x5/0xfbef5 [ 35.752669] dml21_validate+0x3d4/0x980 [amdgpu] Reviewed-by: Austin Zheng <austin.zheng@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit f8ad62c0a93e5dd94243e10f1b742232e4d6411e)
generated by cgit (git 2.34.1) at 2025-09-11 21:05:03 +0000