summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-06-19PCI: imx6: Save and restore root port MSI control in suspend and resumeRichard Zhu
The imx6 PCI host controller suffers from a HW integration bug whereby the MSI enable bit in the root port MSI capability enables/disables MSIs interrupts for all downstream components in the PCI tree. This requires, as implemented in 75cb8d20c112 ("PCI: imx: Enable MSI from downstream components") that the root port MSI enable bit should be set in order for downstream PCI devices MSIs to function. The MSI enable bit programming might be lost during the suspend and should be re-stored during resume. Save the MSI control during suspend and restore it in resume. Link: https://lore.kernel.org/r/1670479534-22154-1-git-send-email-hongxing.zhu@nxp.com Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> [lpieralisi@kernel.org: commit log] Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
2023-06-19drivers: meson: secure-pwrc: always enable DMA domainAlexey Romanov
Starting from commit e45f243409db ("firmware: meson_sm: populate platform devices from sm device tree data") pwrc is probed successfully and disables unused pwr domains. By A1 SoC family design, any TEE requires DMA pwr domain always enabled. Fixes: b3dde5013e13 ("soc: amlogic: Add support for Secure power domains controller") Signed-off-by: Alexey Romanov <avromanov@sberdevices.ru> Acked-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20230610090414.90529-1-avromanov@sberdevices.ru [narmstrong: added fixes tag] Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-06-19pinctrl: tegra: avoid duplicate field initializersArnd Bergmann
The drv_reg field is initialized both in the DRV_PINGROUP_ENTRY_N/DRV_PINGROUP_ENTRY_Y macros and in DRV_PINGROUP_Y. Since each pingroup expands both macros, the are always duplicate and turning on -Woverride-init (which is disabled by default) causes a huge amount of warnings like: drivers/pinctrl/tegra/pinctrl-tegra234.c:1384:27: error: initialized field overwritten [-Werror=override-init] 1384 | #define DRV_PINGROUP_Y(r) ((r)) | ^ drivers/pinctrl/tegra/pinctrl-tegra234.c:1397:28: note: in expansion of macro 'DRV_PINGROUP_Y' 1397 | .drv_reg = DRV_PINGROUP_Y(r), \ | ^~~~~~~~~~~~~~ drivers/pinctrl/tegra/pinctrl-tegra234.c:1447:49: note: in expansion of macro 'DRV_PINGROUP_ENTRY_Y' 1447 | #define drive_soc_gpio08_pb0 DRV_PINGROUP_ENTRY_Y(0x500c, 12, 5, 20, 5, -1, -1, -1, -1, 0) | ^~~~~~~~~~~~~~~~~~~~ ... Remove the intialization that is never used here. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20230616161603.1127687-1-arnd@kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-06-19dt-bindings: pinctrl: qcom,sdx65-tlmm: add pcie_clkreq functionKrzysztof Kozlowski
DTS and driver already support pcie_clkreq function for a pin. Add it to fix dtbs_check warning: qcom-sdx65-mtp.dtb: pinctrl@f100000: pcie-ep-clkreq-default-state: 'oneOf' conditional failed, one must be fixed: 'bias-disable', 'drive-strength', 'function', 'pins' do not match any of the regexes: '-pins$', 'pinctrl-[0-9]+' 'pcie_clkreq' is not one of ['blsp_uart1', 'blsp_spi1', ... 'gpio'] Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20230617111809.129232-1-krzysztof.kozlowski@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-06-19pinctrl: mlxbf3: remove broken Kconfig 'select'Arnd Bergmann
The new pinctrl driver selects GPIO_MLXBF3, but that can not be enabled yet because the MELLANOX_PLATFORM symbol does not exist in the tree: WARNING: unmet direct dependencies detected for GPIO_MLXBF3 Depends on [n]: GPIOLIB [=y] && PCI [=n] && (MELLANOX_PLATFORM [=n] && ARM64 [=y] || COMPILE_TEST [=y]) Selected by [y]: - PINCTRL_MLXBF3 [=y] && PINCTRL [=y] && (MELLANOX_PLATFORM [=n] && ARM64 [=y] || COMPILE_TEST [=y]) As it turns out, the pinctlr driver still builds fine without this, so just remove the select statement. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20230619082104.699331-1-arnd@kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-06-19net: qca_spi: Avoid high load if QCA7000 is not availableStefan Wahren
In case the QCA7000 is not available via SPI (e.g. in reset), the driver will cause a high load. The reason for this is that the synchronization is never finished and schedule() is never called. Since the synchronization is not timing critical, it's safe to drop this from the scheduling condition. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Fixes: 291ab06ecf67 ("net: qualcomm: new Ethernet over SPI driver for QCA7000") Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-19ARM: 9315/1: fiq: include asm/mach/irq.h for prototypesArnd Bergmann
There are two global functions in fiq.c that get called from other files through an extern declaration, but a W=1 build warns about the header not being included before the definition: arch/arm/kernel/fiq.c:85:5: error: no previous prototype for 'show_fiq_list' [-Werror=missing-prototypes] arch/arm/kernel/fiq.c:159:13: error: no previous prototype for 'init_FIQ' [-Werror=missing-prototypes] Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2023-06-19ARM: 9314/1: tcm: move tcm_init() prototype to asm/tcm.hArnd Bergmann
The function definition is in a file that does not include the header with the declaration: arch/arm/kernel/tcm.c:256:13: error: no previous prototype for 'tcm_init' Move the declaration to a global header where it can actually be included. Fixes: de40614e92bf ("ARM: 7694/1: ARM, TCM: initialize TCM in paging_init(), instead of setup_arch()") Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2023-06-19ARM: 9313/1: vdso: add missing prototypesArnd Bergmann
The __vdso_clock_* functions have no prototype, and the __eabi_unwind_cpp_pr* functions have a prototype in a header that is not included before the definition: arch/arm/vdso/vgettimeofday.c:10:5: error: no previous prototype for '__vdso_clock_gettime' [-Werror=missing-prototypes] arch/arm/vdso/vgettimeofday.c:16:5: error: no previous prototype for '__vdso_clock_gettime64' [-Werror=missing-prototypes] arch/arm/vdso/vgettimeofday.c:22:5: error: no previous prototype for '__vdso_gettimeofday' [-Werror=missing-prototypes] arch/arm/vdso/vgettimeofday.c:28:5: error: no previous prototype for '__vdso_clock_getres' [-Werror=missing-prototypes] arch/arm/vdso/vgettimeofday.c:36:6: error: no previous prototype for '__aeabi_unwind_cpp_pr0' [-Werror=missing-prototypes] arch/arm/vdso/vgettimeofday.c:40:6: error: no previous prototype for '__aeabi_unwind_cpp_pr1' [-Werror=missing-prototypes] arch/arm/vdso/vgettimeofday.c:44:6: error: no previous prototype for '__aeabi_unwind_cpp_pr2' [-Werror=missing-prototypes] Add the prototypes in an appropriate header and ensure that both are included here. Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2023-06-19ARM: 9312/1: vfp: include asm/neon.h in vfpmodule.cArnd Bergmann
Two functions defined here need the declaration in a header to avoid W=1 warnings: arch/arm/vfp/vfpmodule.c:735:6: error: no previous prototype for 'kernel_neon_begin' [-Werror=missing-prototypes] arch/arm/vfp/vfpmodule.c:768:6: error: no previous prototype for 'kernel_neon_end' [-Werror=missing-prototypes] Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2023-06-19ARM: 9311/1: decompressor: move function prototypes to misc.hArnd Bergmann
A number of prototypes are missing for the decompressor, some of them are in the .c files that contain the callers, but are invisible at the function definition: arch/arm/boot/compressed/misc.c:129:17: error: no previous prototype for '__div0' [-Werror=missing-prototypes] arch/arm/boot/compressed/misc.c:138:1: error: no previous prototype for 'decompress_kernel' [-Werror=missing-prototypes] arch/arm/boot/compressed/misc.c:163:6: error: no previous prototype for 'fortify_panic' [-Werror=missing-prototypes] arch/arm/boot/compressed/decompress.c:63:5: error: no previous prototype for 'do_decompress' [-Werror=missing-prototypes] arch/arm/boot/compressed/fdt_check_mem_start.c:63:10: error: no previous prototype for 'fdt_check_mem_start' [-Werror=missing-prototypes] Move these all to misc.h so they are visible by the callee as well. Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2023-06-19ARM: 9310/1: xip-kernel: add __inflate_kernel_data prototypeArnd Bergmann
The kernel .data decompression is called from assembler, so it does not need a prototype, but adding one avoids this W=1 warning: arch/arm/kernel/head-inflate-data.c:35:12: error: no previous prototype for '__inflate_kernel_data' [-Werror=missing-prototypes] The same file contains a few extern declarations for assembler symbols, move those into the header as well for consistency. Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2023-06-19ARM: 9309/1: add missing syscall prototypesArnd Bergmann
All architecture-independent system calls have prototypes in include/linux/syscalls.h, but there are a few that only exist on arm or that take the pt_regs directly. These cause a W=1 warning such as: arch/arm/kernel/signal.c:186:16: error: no previous prototype for 'sys_sigreturn' [-Werror=missing-prototypes] arch/arm/kernel/signal.c:216:16: error: no previous prototype for 'sys_rt_sigreturn' [-Werror=missing-prototypes] arch/arm/kernel/sys_arm.c:32:17: error: no previous prototype for 'sys_arm_fadvise64_64' [-Werror=missing-prototypes] Add prototypes for all custom syscalls on arm and add them to asm/syscalls.h. Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2023-06-19ARM: 9308/1: move setup functions to headerArnd Bergmann
A couple of functions are declared in arch/arm/mm/mmu.c rather than in a header, which causes W=1 build warnings: arch/arm/mm/init.c:97:13: error: no previous prototype for 'setup_dma_zone' [-Werror=missing-prototypes] arch/arm/mm/mmu.c:118:13: error: no previous prototype for 'init_default_cache_policy' [-Werror=missing-prototypes] arch/arm/mm/mmu.c:1195:13: error: no previous prototype for 'adjust_lowmem_bounds' [-Werror=missing-prototypes] arch/arm/mm/mmu.c:1761:13: error: no previous prototype for 'paging_init' [-Werror=missing-prototypes] arch/arm/mm/mmu.c:1794:13: error: no previous prototype for 'early_mm_init' [-Werror=missing-prototypes] Move the declaratsion to asm/setup.h so they can be seen by the compiler while building the definition. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2023-06-19ARM: 9307/1: nommu: include asm/idmap.hArnd Bergmann
setup_mm_for_reboot() is declared in asm/idmap.h but that is not included for the definition, causing a W=1 warning: arch/arm/mm/nommu.c:178:6: error: no previous prototype for 'setup_mm_for_reboot' [-Werror=missing-prototypes] Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2023-06-19ARM: 9306/1: cacheflush: avoid __flush_anon_page() missing-prototype warningArnd Bergmann
The prototype for __flush_anon_page() is intentionally hidden inside the flush_anon_page() inline function to prevent it from being called from drivers. When building with 'W=1', this causes a warning: arch/arm/mm/flush.c:358:6: error: no previous prototype for '__flush_anon_page' [-Werror=missing-prototypes] Work around this by adding a prototype directly next to the function definition. Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2023-06-19ARM: 9305/1: add clear/copy_user_highpage declarationsArnd Bergmann
The CPU specific helpers have to be global functions when building a kernel for just one CPU, but are called through indirect function pointers in a multi-CPU kernel. This config currently lacks the declarations for the individual helpers, e.g.: arch/arm/mm/copypage-v4wb.c:47:6: error: no previous prototype for 'v4wb_copy_user_highpage' [-Werror=missing-prototypes] arch/arm/mm/copypage-v4wb.c:65:6: error: no previous prototype for 'v4wb_clear_user_highpage' [-Werror=missing-prototypes] Add the complete set of prototypes in asm/page.h to allow building iwth -Wmissing-prototypes. Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2023-06-19ARM: 9304/1: add prototype for function called only from asmArnd Bergmann
When building with 'make W=1', the compiler warns about any function definition that does not come with a prototype in a header, to ensure it matches what the caller expects. This includes functions that are only ever caller from assembly code and don't technically need a declaration: arch/arm/kernel/ftrace.c:227:6: error: no previous prototype for 'prepare_ftrace_return' arch/arm/kernel/ptrace.c:850:16: error: no previous prototype for 'syscall_trace_enter' arch/arm/kernel/ptrace.c:878:17: error: no previous prototype for 'syscall_trace_exit' arch/arm/kernel/signal.c:601:1: error: no previous prototype for 'do_work_pending' arch/arm/kernel/signal.c:672:17: error: no previous prototype for 'do_rseq_syscall' arch/arm/kernel/suspend.c:75:6: error: no previous prototype for '__cpu_suspend_save' arch/arm/kernel/traps.c:451:17: error: no previous prototype for 'do_undefinstr' arch/arm/kernel/traps.c:516:39: error: no previous prototype for 'handle_fiq_as_nmi' arch/arm/kernel/traps.c:535:17: error: no previous prototype for 'bad_mode' arch/arm/kernel/traps.c:608:16: error: no previous prototype for 'arm_syscall' arch/arm/kernel/traps.c:734:1: error: no previous prototype for 'baddataabort' arch/arm/kernel/traps.c:774:17: error: no previous prototype for '__div0' arch/arm/kernel/traps.c:97:6: error: no previous prototype for 'dump_backtrace_stm' arch/arm/kernel/unwind.c:40:6: error: no previous prototype for '__aeabi_unwind_cpp_pr0' arch/arm/kernel/unwind.c:45:6: error: no previous prototype for '__aeabi_unwind_cpp_pr1' arch/arm/kernel/unwind.c:50:6: error: no previous prototype for '__aeabi_unwind_cpp_pr2' arch/arm/mm/fault.c:554:1: error: no previous prototype for 'do_DataAbort' arch/arm/mm/fault.c:584:1: error: no previous prototype for 'do_PrefetchAbort' arch/arm/mm/proc-v7-bugs.c:280:6: error: no previous prototype for 'cpu_v7_ca8_ibe' arch/arm/mm/proc-v7-bugs.c:293:6: error: no previous prototype for 'cpu_v7_bugs_init' arch/arm/vdso/vgettimeofday.c:36:6: error: no previous prototype for '__aeabi_unwind_cpp_pr0' arch/arm/vdso/vgettimeofday.c:40:6: error: no previous prototype for '__aeabi_unwind_cpp_pr1' arch/arm/vdso/vgettimeofday.c:44:6: error: no previous prototype for '__aeabi_unwind_cpp_pr2' arch/arm/vfp/vfpmodule.c:323:6: error: no previous prototype for 'VFP_bounce' Add the prototypes anyway, to allow enabling this warning by default in the future. Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2023-06-19ARM: 9303/1: kprobes: avoid missing-declaration warningsArnd Bergmann
checker_stack_use_t32strd() and kprobe_handler() can be made static since they are not used from other files, while coverage_start_registers() and __kprobes_test_case() are used from assembler code, and just need a declaration to avoid a warning with the global definition. arch/arm/probes/kprobes/checkers-common.c:43:18: error: no previous prototype for 'checker_stack_use_t32strd' arch/arm/probes/kprobes/core.c:236:16: error: no previous prototype for 'kprobe_handler' arch/arm/probes/kprobes/test-core.c:723:10: error: no previous prototype for 'coverage_start_registers' arch/arm/probes/kprobes/test-core.c:918:14: error: no previous prototype for '__kprobes_test_case_start' arch/arm/probes/kprobes/test-core.c:952:14: error: no previous prototype for '__kprobes_test_case_end_16' arch/arm/probes/kprobes/test-core.c:967:14: error: no previous prototype for '__kprobes_test_case_end_32' Fixes: 6624cf651f1a ("ARM: kprobes: collects stack consumption for store instructions") Fixes: 454f3e132d05 ("ARM/kprobes: Remove jprobe arm implementation") Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2023-06-19ARM: 9302/1: traps: hide unused functions on NOMMUArnd Bergmann
A couple of functions in this file are only used on MMU-enabled builds, and never even declared otherwise, causing these build warnings: arch/arm/kernel/traps.c:759:6: error: no previous prototype for '__pte_error' [-Werror=missing-prototypes] arch/arm/kernel/traps.c:764:6: error: no previous prototype for '__pmd_error' [-Werror=missing-prototypes] arch/arm/kernel/traps.c:769:6: error: no previous prototype for '__pgd_error' [-Werror=missing-prototypes] Protect these in an #ifdef to avoid the warnings and save a little bit of .text space. Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2023-06-19ARM: 9301/1: dma-mapping: hide unused dma_contiguous_early_fixup functionArnd Bergmann
The dma_contiguous_early_fixup() function is a global __weak stub with an arm specific override, but the declaration is in an #ifdef. If CONFIG_DMA_CMA is disabled, there is no caller and no prototype, which adds a warning for the definition: arm/mm/dma-mapping.c:261:13: error: no previous prototype for 'dma_contiguous_early_fixup' [-Werror=missing-prototypes] Enclose the definition in the same #ifdef as the prototype to avoid that and save a few bytes of .init.text. Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2023-06-19ARM: 9300/1: Replace all non-returning strlcpy with strscpyAzeem Shaikh
strlcpy() reads the entire source buffer first. This read may exceed the destination size limit. This is both inefficient and can lead to linear read overflows if a source string is not NUL-terminated [1]. In an effort to remove strlcpy() completely [2], replace strlcpy() here with strscpy(). No return values were used, so direct replacement is safe. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy [2] https://github.com/KSPP/linux/issues/89 [ardb: submitting to the patch tracker on behalf of Azeem] Signed-off-by: Azeem Shaikh <azeemshaikh38@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2023-06-19ARM: 9299/1: module: use sign_extend32() to extend the signednessMasahiro Yamada
The function name clarifies the intention. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2023-06-19ARM: 9298/1: Drop custom mdesc->handle_irq()Linus Walleij
ARM exclusively uses GENERIC_IRQ_MULTI_HANDLER, so at some point set_handle_irq() needs to be called to handle system-wide interrupts. For all DT-enabled boards, this call happens down in the drivers/irqchip subsystem, after locating the target irqchip driver from the device tree. We still have a few instances of the boardfiles with machine descriptors passing a machine-specific .handle_irq() to the ARM kernel core. Get rid of this by letting the few remaining machines consistently call set_handle_irq() from the end of the .init_irq() callback instead and diet down one member from the machine descriptor. Cc: Marc Zyngier <maz@kernel.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2023-06-19mtd: otp: clean up on error in mtd_otp_nvmem_add()Dan Carpenter
Smatch complains that these error paths are missing cleanup: drivers/mtd/mtdcore.c:983 mtd_otp_nvmem_add() warn: missing unwind goto? This needs to call nvmem_unregister(mtd->otp_user_nvmem) before returning. Fixes: 3b270fac8443 ("mtd: otp: Put factory OTP/NVRAM into the entropy pool") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/fe7ef901-9571-4c6e-a40e-449046efe2c6@moroto.mountain
2023-06-19dt-bindings: mtd: partition: Add missing type for "linux,rootfs"Rob Herring
"linux,rootfs" is missing a type, add it. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20230613201014.2823185-1-robh@kernel.org
2023-06-19mtd: maps: pismo: Switch back to use i2c_driver's .probe()Uwe Kleine-König
After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new() call-back type"), all drivers being converted to .probe_new() and then commit 03c835f498b5 ("i2c: Switch .probe() to not take an id parameter") convert back to (the new) .probe() to be able to eventually drop .probe_new() from struct i2c_driver. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20230611204327.828122-1-u.kleine-koenig@pengutronix.de
2023-06-19mtd: rawnand: macronix: OTP access for MX30LFxG18ACArseniy Krasnov
Support for OTP area access on MX30LFxG18AC chip series. Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20230615094015.3780078-1-AVKrasnov@sberdevices.ru
2023-06-19mtd: rawnand: meson: fix unaligned DMA buffers handlingArseniy Krasnov
Meson NAND controller requires 8 bytes alignment for DMA addresses, otherwise it "aligns" passed address by itself thus accessing invalid location in the provided buffer. This patch makes unaligned buffers to be reallocated to become valid. Fixes: 8fae856c5350 ("mtd: rawnand: meson: add support for Amlogic NAND flash controller") Cc: <Stable@vger.kernel.org> Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20230615080815.3291006-1-AVKrasnov@sberdevices.ru
2023-06-19mtd: rawnand: add support for the Sandisk SDTNQGAMA chipJohan Jonker
Sandisk SDTNQGAMA is a 8GB size, 3.3V 8 bit chip with 16KB page size, 1KB write size and 40 bit ecc support Co-developed-by: Paweł Jarosz <paweljarosz3691@gmail.com> Signed-off-by: Paweł Jarosz <paweljarosz3691@gmail.com> Signed-off-by: Johan Jonker <jbx6244@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/98811c98-4681-6ddc-8287-bd9b77559c51@gmail.com
2023-06-19mtd: rawnand: add basic sandisk manufacturer opsJohan Jonker
Add basic Sandisk manufacturer ops support to get SDTNQGAMA timing data with the nand_get_sdr_timings() function. Signed-off-by: Johan Jonker <jbx6244@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/aaf4580a-a368-8f70-c9c4-21b5ed4dd599@gmail.com
2023-06-19Merge branches 'iommu/fixes', 'arm/smmu', 'ppc/pamu', 'virtio', 'x86/vt-d', ↵Joerg Roedel
'core' and 'x86/amd' into next
2023-06-19powerpc: update ppc_save_regs to save current r1 in pt_regsAditya Gupta
ppc_save_regs() skips one stack frame while saving the CPU register states. Instead of saving current R1, it pulls the previous stack frame pointer. When vmcores caused by direct panic call (such as `echo c > /proc/sysrq-trigger`), are debugged with gdb, gdb fails to show the backtrace correctly. On further analysis, it was found that it was because of mismatch between r1 and NIP. GDB uses NIP to get current function symbol and uses corresponding debug info of that function to unwind previous frames, but due to the mismatching r1 and NIP, the unwinding does not work, and it fails to unwind to the 2nd frame and hence does not show the backtrace. GDB backtrace with vmcore of kernel without this patch: --------- (gdb) bt #0 0xc0000000002a53e8 in crash_setup_regs (oldregs=<optimized out>, newregs=0xc000000004f8f8d8) at ./arch/powerpc/include/asm/kexec.h:69 #1 __crash_kexec (regs=<optimized out>) at kernel/kexec_core.c:974 #2 0x0000000000000063 in ?? () #3 0xc000000003579320 in ?? () --------- Further analysis revealed that the mismatch occurred because "ppc_save_regs" was saving the previous stack's SP instead of the current r1. This patch fixes this by storing current r1 in the saved pt_regs. GDB backtrace with vmcore of patched kernel: -------- (gdb) bt #0 0xc0000000002a53e8 in crash_setup_regs (oldregs=0x0, newregs=0xc00000000670b8d8) at ./arch/powerpc/include/asm/kexec.h:69 #1 __crash_kexec (regs=regs@entry=0x0) at kernel/kexec_core.c:974 #2 0xc000000000168918 in panic (fmt=fmt@entry=0xc000000001654a60 "sysrq triggered crash\n") at kernel/panic.c:358 #3 0xc000000000b735f8 in sysrq_handle_crash (key=<optimized out>) at drivers/tty/sysrq.c:155 #4 0xc000000000b742cc in __handle_sysrq (key=key@entry=99, check_mask=check_mask@entry=false) at drivers/tty/sysrq.c:602 #5 0xc000000000b7506c in write_sysrq_trigger (file=<optimized out>, buf=<optimized out>, count=2, ppos=<optimized out>) at drivers/tty/sysrq.c:1163 #6 0xc00000000069a7bc in pde_write (ppos=<optimized out>, count=<optimized out>, buf=<optimized out>, file=<optimized out>, pde=0xc00000000362cb40) at fs/proc/inode.c:340 #7 proc_reg_write (file=<optimized out>, buf=<optimized out>, count=<optimized out>, ppos=<optimized out>) at fs/proc/inode.c:352 #8 0xc0000000005b3bbc in vfs_write (file=file@entry=0xc000000006aa6b00, buf=buf@entry=0x61f498b4f60 <error: Cannot access memory at address 0x61f498b4f60>, count=count@entry=2, pos=pos@entry=0xc00000000670bda0) at fs/read_write.c:582 #9 0xc0000000005b4264 in ksys_write (fd=<optimized out>, buf=0x61f498b4f60 <error: Cannot access memory at address 0x61f498b4f60>, count=2) at fs/read_write.c:637 #10 0xc00000000002ea2c in system_call_exception (regs=0xc00000000670be80, r0=<optimized out>) at arch/powerpc/kernel/syscall.c:171 #11 0xc00000000000c270 in system_call_vectored_common () at arch/powerpc/kernel/interrupt_64.S:192 -------- Nick adds: So this now saves regs as though it was an interrupt taken in the caller, at the instruction after the call to ppc_save_regs, whereas previously the NIP was there, but R1 came from the caller's caller and that mismatch is what causes gdb's dwarf unwinder to go haywire. Signed-off-by: Aditya Gupta <adityag@linux.ibm.com> Fixes: d16a58f8854b1 ("powerpc: Improve ppc_save_regs()") Reivewed-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230615091047.90433-1-adityag@linux.ibm.com
2023-06-19powerpc/ftrace: Disable ftrace on ppc32 if using clangNaveen N Rao
Ftrace on ppc32 expects a three instruction sequence at the beginning of each function when specifying -pg: mflr r0 stw r0,4(r1) bl _mcount This is the case with all supported versions of gcc. Clang however emits a branch to _mcount after the function prologue, similar to the pre -mprofile-kernel ABI on ppc64. This is not supported. Disable ftrace on ppc32 if using clang for now. This can be re-enabled later if clang picks up support for -fpatchable-function-entry on ppc32. Signed-off-by: Naveen N Rao <naveen@kernel.org> Acked-by: Nick Desaulniers <ndesaulniers@google.com> Link: https://github.com/llvm/llvm-project/issues/63220 Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230609034501.407971-1-naveen@kernel.org
2023-06-19powerpc/powernv/sriov: perform null check on iov before dereferencing iovColin Ian King
Currently pointer iov is being dereferenced before the null check of iov which can lead to null pointer dereference errors. Fix this by moving the iov null check before the dereferencing. Detected using cppcheck static analysis: linux/arch/powerpc/platforms/powernv/pci-sriov.c:597:12: warning: Either the condition '!iov' is redundant or there is possible null pointer dereference: iov. [nullPointerRedundantCheck] num_vfs = iov->num_vfs; ^ Fixes: 052da31d45fc ("powerpc/powernv/sriov: De-indent setup and teardown") Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230608095849.1147969-1-colin.i.king@gmail.com
2023-06-19selftests/powerpc/dexcr: Add DEXCR status utility lsdexcrBenjamin Gray
Add a utility 'lsdexcr' to print the current DEXCR status. Useful for quickly checking the status such as when debugging test failures or verifying the new default DEXCR does what you want (for userspace at least). Example output: # ./lsdexcr uDEXCR: 04000000 (NPHIE) HDEXCR: 00000000 Effective: 04000000 (NPHIE) SBHE (0): clear (Speculative branch hint enable) IBRTPD (3): clear (Indirect branch recurrent target ...) SRAPD (4): clear (Subroutine return address ...) NPHIE * (5): set (Non-privileged hash instruction enable) PHIE (6): clear (Privileged hash instruction enable) DEXCR[NPHIE] enabled: hashst/hashchk working Signed-off-by: Benjamin Gray <bgray@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230616034846.311705-12-bgray@linux.ibm.com
2023-06-19selftests/powerpc/dexcr: Add hashst/hashchk testBenjamin Gray
Test the kernel DEXCR[NPHIE] interface and hashchk exception handling. Introduces with it a DEXCR utils library for common DEXCR operations. Volatile is used to prevent the compiler optimising away the signal tests. Signed-off-by: Benjamin Gray <bgray@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230616034846.311705-11-bgray@linux.ibm.com
2023-06-19selftests/powerpc: Add more utility macrosBenjamin Gray
Adds _MSG assertion variants to provide more context behind why a failure occurred. Also include unistd.h for _exit() and stdio.h for fprintf(), and move ARRAY_SIZE macro to utils.h. The _MSG variants and ARRAY_SIZE will be used by the following DEXCR selftests. Signed-off-by: Benjamin Gray <bgray@linux.ibm.com> Reviewed-by: Russell Currey <ruscur@russell.cc> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230616034846.311705-10-bgray@linux.ibm.com
2023-06-19Documentation: Document PowerPC kernel DEXCR interfaceBenjamin Gray
Describe the DEXCR and document how to configure it. Signed-off-by: Benjamin Gray <bgray@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230616034846.311705-9-bgray@linux.ibm.com
2023-06-19powerpc/ptrace: Expose HASHKEYR register to ptraceBenjamin Gray
The HASHKEYR register contains a secret per-process key to enable unique hashes per process. In general it should not be exposed to userspace at all and a regular process has no need to know its key. However, checkpoint restore in userspace (CRIU) functionality requires that a process be able to set the HASHKEYR of another process, otherwise existing hashes on the stack would be invalidated by a new random key. Exposing HASHKEYR in this way also makes it appear in core dumps, which is a security concern. Multiple threads may share a key, for example just after a fork() call, where the kernel cannot know if the child is going to return back along the parent's stack. If such a thread is coerced into making a core dump, then the HASHKEYR value will be readable and able to be used against all other threads sharing that key, effectively undoing any protection offered by hashst/hashchk. Therefore we expose HASHKEYR to ptrace when CONFIG_CHECKPOINT_RESTORE is enabled, providing a choice of increased security or migratable ROP protected processes. This is similar to how ARM exposes its PAC keys. Signed-off-by: Benjamin Gray <bgray@linux.ibm.com> Reviewed-by: Russell Currey <ruscur@russell.cc> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230616034846.311705-8-bgray@linux.ibm.com
2023-06-19powerpc/ptrace: Expose DEXCR and HDEXCR registers to ptraceBenjamin Gray
The DEXCR register is of interest when ptracing processes. Currently it is static, but eventually will be dynamically controllable by a process. If a process can control its own, then it is useful for it to be ptrace-able to (e.g., for checkpoint-restore functionality). It is also relevant to core dumps (the NPHIE aspect in particular), which use the ptrace mechanism (or is it the other way around?) to decide what to dump. The HDEXCR is useful here too, as the NPHIE aspect may be set in the HDEXCR without being set in the DEXCR. Although the HDEXCR is per-cpu and we don't track it in the task struct (it's useless in normal operation), it would be difficult to imagine why a hypervisor would set it to different values within a guest. A hypervisor cannot safely set NPHIE differently at least, as that would break programs. Expose a read-only view of the userspace DEXCR and HDEXCR to ptrace. The HDEXCR is always readonly, and is useful for diagnosing the core dumps (as the HDEXCR may set NPHIE without the DEXCR setting it). Signed-off-by: Benjamin Gray <bgray@linux.ibm.com> Reviewed-by: Russell Currey <ruscur@russell.cc> [mpe: Use lower_32_bits() rather than open coding] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230616034846.311705-7-bgray@linux.ibm.com
2023-06-19powerpc/dexcr: Support userspace ROP protectionBenjamin Gray
The ISA 3.1B hashst and hashchk instructions use a per-cpu SPR HASHKEYR to hold a key used in the hash calculation. This key should be different for each process to make it harder for a malicious process to recreate valid hash values for a victim process. Add support for storing a per-thread hash key, and setting/clearing HASHKEYR appropriately. Signed-off-by: Benjamin Gray <bgray@linux.ibm.com> Reviewed-by: Russell Currey <ruscur@russell.cc> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230616034846.311705-6-bgray@linux.ibm.com
2023-06-19powerpc/dexcr: Handle hashchk exceptionBenjamin Gray
Recognise and pass the appropriate signal to the user program when a hashchk instruction triggers. This is independent of allowing configuration of DEXCR[NPHIE], as a hypervisor can enforce this aspect regardless of the kernel. The signal mirrors how ARM reports their similar check failure. For example, their FPAC handler in arch/arm64/kernel/traps.c do_el0_fpac() does this. When we fail to read the instruction that caused the fault we send a segfault, similar to how emulate_math() does it. Signed-off-by: Benjamin Gray <bgray@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230616034846.311705-5-bgray@linux.ibm.com
2023-06-19powerpc/dexcr: Add initial Dynamic Execution Control Register (DEXCR) supportBenjamin Gray
ISA 3.1B introduces the Dynamic Execution Control Register (DEXCR). It is a per-cpu register that allows control over various CPU behaviours including branch hint usage, indirect branch speculation, and hashst/hashchk support. Add some definitions and basic support for the DEXCR in the kernel. Right now it just * Initialises the DEXCR and HASHKEYR to a fixed value when a CPU onlines. * Clears them in reset_sprs(). * Detects when the NPHIE aspect is supported (the others don't get looked at in this series, so there's no need to waste a CPU_FTR on them). We initialise the HASHKEYR to ensure that all cores have the same key, so an HV enforced NPHIE + swapping cores doesn't randomly crash a process using hash instructions. The stores to HASHKEYR are unconditional because the ISA makes no mention of the SPR being missing if support for doing the hashes isn't present. So all that would happen is the HASHKEYR value gets ignored. This helps slightly if NPHIE detection fails; e.g., we currently only detect it on pseries. Signed-off-by: Benjamin Gray <bgray@linux.ibm.com> [mpe: Use simple values for DEXCR constants] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230616034846.311705-4-bgray@linux.ibm.com
2023-06-19powerpc/ptrace: Add missing <linux/regset.h> includeBenjamin Gray
ptrace-decl.h uses user_regset_get2_fn (among other things) from regset.h. While all current users of ptrace-decl.h include regset.h before it anyway, it adds an implicit ordering dependency and breaks source tooling that tries to inspect ptrace-decl.h by itself. Signed-off-by: Benjamin Gray <bgray@linux.ibm.com> Reviewed-by: Russell Currey <ruscur@russell.cc> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230616034846.311705-3-bgray@linux.ibm.com
2023-06-19powerpc/book3s: Add missing <linux/sched.h> includeBenjamin Gray
The functions here use struct task_struct fields, so need to import the full definition from <linux/sched.h>. The <asm/current.h> header that defines current only forward declares struct task_struct. Failing to include this <linux/sched.h> header leads to a compilation error when a translation unit does not also include <linux/sched.h> indirectly. Signed-off-by: Benjamin Gray <bgray@linux.ibm.com> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Russell Currey <ruscur@russell.cc> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230616034846.311705-2-bgray@linux.ibm.com
2023-06-19tracing/timer: Add missing hrtimer modes to decode_hrtimer_mode().Sebastian Andrzej Siewior
The trace output for the HRTIMER_MODE_.*_HARD modes is seen as a number since these modes are not decoded. The author was not aware of the fancy decoding function which makes the life easier. Extend decode_hrtimer_mode() with the additional HRTIMER_MODE_.*_HARD modes. Fixes: ae6683d815895 ("hrtimer: Introduce HARD expiry mode") Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com> Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org> Link: https://lore.kernel.org/r/20230418143854.8vHWQKLM@linutronix.de
2023-06-19fbdev: hitfb: Use NULL for pointersThomas Zimmermann
Replace integer constants with NULL. Resolves the following warnings: ../drivers/video/fbdev/hitfb.c:447:23: warning: Using plain integer as NULL pointer ../drivers/video/fbdev/hitfb.c:465:23: warning: Using plain integer as NULL pointer Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Helge Deller <deller@gmx.de>
2023-06-19fbdev: hitfb: Fix integer-to-pointer castThomas Zimmermann
Fix the type casting from unsigned long to char __iomem *. Resolves the following warning: ../drivers/video/fbdev/hitfb.c:411:27: warning: incorrect type in assignment (different address spaces) ../drivers/video/fbdev/hitfb.c:411:27: expected char [noderef] __iomem *screen_base ../drivers/video/fbdev/hitfb.c:411:27: got void * Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Helge Deller <deller@gmx.de>
2023-06-19fbdev/media: Use GPIO descriptors for VIA GPIOLinus Walleij
The VIA fbdev exposes a custom GPIO chip for its GPIOs, these are in turn looked up the camera driver using a custom API. Drop the custom API, provide a look-up table and convert to GPIO descriptors. Note proper polarity on the RESET line. Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Helge Deller <deller@gmx.de>
generated by cgit (git 2.34.1) at 2025-10-01 00:31:58 +0000