summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-08-15clk: samsung: exynos3250: do not define number of clocks in bindingsKrzysztof Kozlowski
Number of clocks supported by Linux drivers might vary - sometimes we add new clocks, not exposed previously. Therefore these numbers of clocks should not be in the bindings, as that prevents changing them. Define number of clocks per each clock controller inside the driver directly. Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Link: https://lore.kernel.org/r/20230808082738.122804-2-krzysztof.kozlowski@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2023-08-14Merge tag 'sunxi-clk-for-6.6-2' of ↵Stephen Boyd
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into clk-allwinner Pull Allwinner clk driver changes from Chen-Yu Tsai: - Parameter name correction for ccu_nkm_round_rate() - Implement CLK_SET_RATE_PARENT for NKM clocks, i.e. consider alternative parent rates when determining clock rates - Set CLK_SET_RATE_PARENT for A64 pll-mipi - Support finding closest (as opposed to closest but not higher) clock rate for NM, NKM, mux and div type clocks, as use it for A64 pll-video0 - Prefer current parent rate if able to generate ideal clock rate for NKM clocks * tag 'sunxi-clk-for-6.6-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: clk: sunxi-ng: nkm: Prefer current parent rate clk: sunxi-ng: a64: select closest rate for pll-video0 clk: sunxi-ng: div: Support finding closest rate clk: sunxi-ng: mux: Support finding closest rate clk: sunxi-ng: nkm: Support finding closest rate clk: sunxi-ng: nm: Support finding closest rate clk: sunxi-ng: Add helper function to find closest rate clk: sunxi-ng: Add feature to find closest rate clk: sunxi-ng: a64: allow pll-mipi to set parent's rate clk: sunxi-ng: nkm: consider alternative parent rates when determining rate clk: sunxi-ng: nkm: Use correct parameter name for parent HW
2023-08-14clk: imx: pll14xx: dynamically configure PLL for 393216000/361267200HzAhmad Fatoum
Since commit b09c68dc57c9 ("clk: imx: pll14xx: Support dynamic rates"), the driver has the ability to dynamically compute PLL parameters to approximate the requested rates. This is not always used, because the logic is as follows: - Check if the target rate is hardcoded in the frequency table - Check if varying only kdiv is possible, so switch over is glitch free - Compute rate dynamically by iterating over pdiv range If we skip the frequency table for the 1443x PLL, we find that the computed values differ to the hardcoded ones. This can be valid if the hardcoded values guarantee for example an earlier lock-in or if the divisors are chosen, so that other important rates are more likely to be reached glitch-free. For rates (393216000 and 361267200, this doesn't seem to be the case: They are only approximated by existing parameters (393215995 and 361267196 Hz, respectively) and they aren't reachable glitch-free from other hardcoded frequencies. Dropping them from the table allows us to lock-in to these frequencies exactly. This is immediately noticeable because they are the assigned-clock-rates for IMX8MN_AUDIO_PLL1 and IMX8MN_AUDIO_PLL2, respectively and a look into clk_summary so far showed that they were a few Hz short of the target: imx8mn-board:~# grep audio_pll[12]_out /sys/kernel/debug/clk/clk_summary audio_pll2_out 0 0 0 361267196 0 0 50000 N audio_pll1_out 1 1 0 393215995 0 0 50000 Y and afterwards: imx8mn-board:~# grep audio_pll[12]_out /sys/kernel/debug/clk/clk_summary audio_pll2_out 0 0 0 361267200 0 0 50000 N audio_pll1_out 1 1 0 393216000 0 0 50000 Y This change is equivalent to adding following hardcoded values: /* rate mdiv pdiv sdiv kdiv */ PLL_1443X_RATE(393216000, 655, 5, 3, 23593), PLL_1443X_RATE(361267200, 497, 33, 0, -16882), Fixes: 053a4ffe2988 ("clk: imx: imx8mm: fix audio pll setting") Cc: stable@vger.kernel.org # v5.18+ Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Link: https://lore.kernel.org/r/20230807084744.1184791-2-m.felsch@pengutronix.de Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
2023-08-14clk: imx: pll14xx: align pdiv with reference manualMarco Felsch
The PLL14xx hardware can be found on i.MX8M{M,N,P} SoCs and always come with a 6-bit pre-divider. Neither the reference manuals nor the datasheets of these SoCs do mention any restrictions. Furthermore the current code doesn't respect the restrictions from the comment too. Therefore drop the restriction and align the max pre-divider (pdiv) value to 63 to get more accurate frequencies. Fixes: b09c68dc57c9 ("clk: imx: pll14xx: Support dynamic rates") Cc: stable@vger.kernel.org Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Reviewed-by: Adam Ford <aford173@gmail.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Tested-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Link: https://lore.kernel.org/r/20230807084744.1184791-1-m.felsch@pengutronix.de Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
2023-08-14clk: imx: composite-8m: fix clock pauses when set_rate would be a no-opAhmad Fatoum
Reconfiguring the clock divider to the exact same value is observed on an i.MX8MN to often cause a longer than usual clock pause, probably because the divider restarts counting whenever the register is rewritten. This issue doesn't show up normally, because the clock framework will take care to not call set_rate when the clock rate is the same. However, when we reconfigure an upstream clock, the common code will call set_rate with the newly calculated rate on all children, e.g.: - sai5 is running normally and divides Audio PLL out by 16. - Audio PLL rate is increased by 32Hz (glitch-free kdiv change) - rates for children are recalculated and rates are set recursively - imx8m_clk_composite_divider_set_rate(sai5) is called with 32/16 = 2Hz more - imx8m_clk_composite_divider_set_rate computes same divider as before - divider register is written, so it restarts counting from zero and MCLK is briefly paused, so instead of e.g. 40ns, MCLK is low for 120ns. Some external clock consumers can be upset by such unexpected clock pauses, so let's make sure we only rewrite the divider value when the value to be written is actually different. Fixes: d3ff9728134e ("clk: imx: Add imx composite clock") Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Reviewed-by: Peng Fan <peng.fan@nxp.com> Link: https://lore.kernel.org/r/20230807082201.2332746-1-a.fatoum@pengutronix.de Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
2023-08-14clk: imx25: make __mx25_clocks_init return voidMartin Kaiser
The __mx25_clocks_init function always returns 0 and its only caller does not check the return value. Let's remove it. Signed-off-by: Martin Kaiser <martin@kaiser.cx> Reviewed-by: Fabio Estevam <festevam@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20230802184046.153394-3-martin@kaiser.cx Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
2023-08-14clk: imx25: print silicon revision during initMartin Kaiser
Print the imx25 silicon revision when the clocks are initialised. Use the same mechanism as for imx27, i.e. call mx25_revision. This function is unused at the moment. Signed-off-by: Martin Kaiser <martin@kaiser.cx> Reviewed-by: Fabio Estevam <festevam@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20230802184046.153394-2-martin@kaiser.cx Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
2023-08-14dt-bindings: clocks: imx8mp: make sai4 a dummy clockMarco Felsch
The hardware don't have a SAI4 instance so remove the define. Use a comment to keep it as reference and to avoid confusion. Fixes: 108869144739 ("dt-bindings: imx: Add clock binding doc for i.MX8MP") Acked-by: Stephen Boyd <sboyd@kernel.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Link: https://lore.kernel.org/r/20230731142150.3186650-2-m.felsch@pengutronix.de Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
2023-08-14clk: imx8mp: fix sai4 clockMarco Felsch
The reference manual don't mention a SAI4 hardware block. This would be clock slice 78 which is skipped (TRM, page 237). Remove any reference to this clock to align the driver with the reality. Fixes: 9c140d992676 ("clk: imx: Add support for i.MX8MP clock driver") Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Link: https://lore.kernel.org/r/20230731142150.3186650-1-m.felsch@pengutronix.de Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
2023-08-14clk: imx: imx8ulp: update SPLL2 typePeng Fan
The SPLL2 on iMX8ULP is different with other frac PLLs, it can support VCO from 650Mhz to 1Ghz. Following the changes to pllv4, use the new type IMX_PLLV4_IMX8ULP_1GHZ. Fixes: c43a801a5789 ("clk: imx: Add clock driver for imx8ulp") Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Link: https://lore.kernel.org/r/20230625123340.4067536-2-peng.fan@oss.nxp.com Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
2023-08-14clk: imx: pllv4: Fix SPLL2 MULT rangeYe Li
The SPLL2 on iMX8ULP is different with other frac PLLs, it can support VCO from 650Mhz to 1Ghz. According to RM, the MULT is using a range from 27 to 54, not some fixed values. If using current PLL implementation, some clock rate can't be supported. Fix the issue by adding new type for the SPLL2 and use MULT range to replace MULT table Fixes: 5f0601c47c33 ("clk: imx: Update the pllv4 to support imx8ulp") Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Jacky Bai <ping.bai@nxp.com> Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Link: https://lore.kernel.org/r/20230625123340.4067536-1-peng.fan@oss.nxp.com Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
2023-08-14clk: imx: imx8: add audio clock mux driverShengjiu Wang
The Audio Clock Mux (ACM) is a collection of control registers and multiplexers that are used to route the audio source clocks to the audio peripherals. Each audio peripheral has its dedicated audio clock mux (which differ based on usage) and control register. Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Link: https://lore.kernel.org/r/1690260984-25744-3-git-send-email-shengjiu.wang@nxp.com Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
2023-08-14dt-bindings: clock: fsl,imx8-acm: Add audio clock mux supportShengjiu Wang
Add the clock dt-binding file for Audio Clock Mux. which is the IP for i.MX8QM, i.MX8QXP, i.MX8DXL. Add the clockid for clocks in header file. The Audio Clock Mux is binded with all the audio IP and audio clocks in the subsystem, so need to list the power domain of related clocks and IPs. Each clock and IP has a power domain, so there are so many power domains. Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/1690260984-25744-2-git-send-email-shengjiu.wang@nxp.com Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
2023-08-14clk: imx: clk-imx8qxp-lpcg: Convert to devm_platform_ioremap_resource()Yangtao Li
Use devm_platform_ioremap_resource() to simplify code. Signed-off-by: Yangtao Li <frank.li@vivo.com> Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Link: https://lore.kernel.org/r/20230705065313.67043-8-frank.li@vivo.com Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
2023-08-13clk: qcom: gcc-msm8917: Enable GPLL0_SLEEP_CLK_SRCOtto Pflüger
This is the parent clock of gpll0_early, so it needs to be enabled for gpll0_early to return the correct rate. Enable GPLL0_SLEEP_CLK_SRC by adding its existing definition to the clock list. This clock also doesn't work with clk_alpha_pll_ops, use clk_branch_simple_ops instead to make it enable and disable correctly. Signed-off-by: Otto Pflüger <otto.pflueger@abscue.de> Link: https://lore.kernel.org/r/20230802170317.205112-3-otto.pflueger@abscue.de Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-13dt-bindings: clock: gcc-msm8917: Add definition for GPLL0_SLEEP_CLK_SRCOtto Pflüger
Add the missing #define for GPLL0_SLEEP_CLK_SRC, the parent clock of GPLL0_EARLY. Signed-off-by: Otto Pflüger <otto.pflueger@abscue.de> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20230802170317.205112-2-otto.pflueger@abscue.de Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-13clk: qcom: gcc-qdu1000: Update the RCGs opsImran Shaik
The clock RCGs are required to be parked at safe clock source(XO) during disable as per the hardware expectation and clk_rcg2_shared_ops are the closest implementation for the same. Hence update the clock RCG ops to clk_rcg2_shared_ops. Signed-off-by: Imran Shaik <quic_imrashai@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230803105741.2292309-9-quic_imrashai@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-13clk: qcom: gcc-qdu1000: Update the SDCC clock RCG opsImran Shaik
Update the GCC SDCC clock RCG ops to clk_rcg2_floor_ops to avoid the overclocking issues on QDU1000 and QRU1000 SoCs. Signed-off-by: Imran Shaik <quic_imrashai@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230803105741.2292309-8-quic_imrashai@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-13clk: qcom: gcc-qdu1000: Add support for GDSCsImran Shaik
Add the GDSCs support for QDU1000 and QRU1000 SoCs. Co-developed-by: Taniya Das <quic_tdas@quicinc.com> Signed-off-by: Taniya Das <quic_tdas@quicinc.com> Signed-off-by: Imran Shaik <quic_imrashai@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230803105741.2292309-7-quic_imrashai@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-13clk: qcom: gcc-qdu1000: Add gcc_ddrss_ecpri_gsi_clk supportImran Shaik
Add the gcc_ddrss_ecpri_gsi_clk support as per the latest hardware version of QDU1000 and QRU100 SoCs. Signed-off-by: Imran Shaik <quic_imrashai@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230803105741.2292309-6-quic_imrashai@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-13clk: qcom: gcc-qdu1000: Register gcc_gpll1_out_even clockImran Shaik
gcc_gpll1_out_even clock is referenced as a parent, but not registered with the clock framework. Hence add support to register the same. Fixes: 1c9efb0bc040 ("clk: qcom: Add QDU1000 and QRU1000 GCC support") Signed-off-by: Imran Shaik <quic_imrashai@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230803105741.2292309-5-quic_imrashai@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-13clk: qcom: gcc-qdu1000: Fix clkref clocks handlingImran Shaik
Update the GCC clkref clock's halt_check to BRANCH_HALT, as it's status bit is not inverted in the latest hardware version of QDU1000 and QRU1000 SoCs. While at it, fix the gcc clkref clock ops as well. Fixes: 1c9efb0bc040 ("clk: qcom: Add QDU1000 and QRU1000 GCC support") Signed-off-by: Imran Shaik <quic_imrashai@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230803105741.2292309-4-quic_imrashai@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-13clk: qcom: gcc-qdu1000: Fix gcc_pcie_0_pipe_clk_src clock handlingImran Shaik
Fix the gcc pcie pipe clock handling as per the clk_regmap_phy_mux_ops implementation to let the clock framework automatically park the clock at XO when the clock is switched off and restore the parent when the clock is switched on. Fixes: 1c9efb0bc040 ("clk: qcom: Add QDU1000 and QRU1000 GCC support") Co-developed-by: Taniya Das <quic_tdas@quicinc.com> Signed-off-by: Taniya Das <quic_tdas@quicinc.com> Signed-off-by: Imran Shaik <quic_imrashai@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230803105741.2292309-3-quic_imrashai@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-13dt-bindings: clock: Update GCC clocks for QDU1000 and QRU1000 SoCsImran Shaik
Add support for GCC_GPLL1_OUT_EVEN and GCC_DDRSS_ECPRI_GSI_CLK clock bindings for QDU1000 and QRU1000 SoCs. While at it, update the maintainers list. Signed-off-by: Imran Shaik <quic_imrashai@quicinc.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230803105741.2292309-2-quic_imrashai@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-13clk: qcom: gcc-sm8450: Use floor ops for SDCC RCGsKonrad Dybcio
Use the floor ops to prevent warnings like this at suspend exit and boot: mmc0: Card appears overclocked; req 800000 Hz, actual 25000000 Hz Fixes: db0c944ee92b ("clk: qcom: Add clock driver for SM8450") Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20230811-topic-8450_clk-v1-1-88031478d548@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-13clk: qcom: ipq5332: drop the gcc_apss_axi_clk_src clockKathiravan T
With the removal of the mem noc clocks in the commit e224dc703521 ("clk: qcom: gcc-ipq5332: drop the mem noc clocks"), we can drop the gcc_apss_axi_clk_src clock as well, since there are no clocks uses this clock as a parent. Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com> Link: https://lore.kernel.org/r/20230710102807.1189942-3-quic_kathirav@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-13clk: qcom: ipq5332: drop the mem noc clocksKathiravan T
Due to the recent design changes, all the mem noc clocks will be configured by the bootloaders and it will be access protected by the TZ firmware. So drop these clocks from the GCC driver. Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com> Link: https://lore.kernel.org/r/20230710102807.1189942-2-quic_kathirav@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-13clk: qcom: gcc-msm8998: Don't check halt bit on some branch clksKonrad Dybcio
Some branch clocks are governed externally and we're only supposed to send a request concerning their shutdown, not actually ensure it happens. Use the BRANCH_HALT_SKIP define to skip checking the halt bit. Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230622-topic-8998clk-v2-6-6222fbc2916b@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-13clk: qcom: gpucc-msm8998: Use the correct GPLL0 leg with old DTsKonrad Dybcio
GPUCC has its own GPLL0 legs - one for 1-1 and one for div-2 output. Add .name lookup to make sure older DTs consume the correct clock. Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Tested-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230622-topic-8998clk-v2-5-6222fbc2916b@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-13clk: qcom: mmcc-msm8998: Properly consume GPLL0 inputsKonrad Dybcio
Up until now, the GPLL0_DIV MMSS input has been modeled as a fixed child of MMSS_GPLL0_DIV that's always-on. Properly representing the former in the GCC driver makes us unable to keep doing so. Consume MSS_GPLL0_DIV through fw_name ("gpll0_div") as well as add a fixed .name link to keep backwards compatibility. Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Tested-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230622-topic-8998clk-v2-4-6222fbc2916b@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-13clk: qcom: gcc-msm8998: Control MMSS and GPUSS GPLL0 outputs properlyKonrad Dybcio
Up until now, we've been relying on some non-descript hardware magic to pinkypromise turn the clocks on for us. While new SoCs shine with that feature, MSM8998 can not always be fully trusted. Register the MMSS and GPUSS GPLL0 legs with the CCF to allow for manual enable voting. Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Tested-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230622-topic-8998clk-v2-3-6222fbc2916b@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-13dt-bindings: clock: qcom,mmcc: Add GPLL0_DIV for MSM8998Konrad Dybcio
We've not been consuming that clock for no apparent reason. Describe it. Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230622-topic-8998clk-v2-2-6222fbc2916b@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-13Merge branch '20230622-topic-8998clk-v2-1-6222fbc2916b@linaro.org' into ↵Bjorn Andersson
clk-for-6.6 Merge additional MSM8998 GCC DeviceTree binding constants through a topic branch to make them available to the DeviceTree source tree as well.
2023-08-13dt-bindings: clk: qcom,gcc-msm8998: Add missing GPU/MMSS GPLL0 legsKonrad Dybcio
GPLL0 has two separate outputs to both GPUSS and MMSS: one that's 2-divided and one that runs at the same rate as the GPLL0 itself. Add the missing ones to the binding. Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230622-topic-8998clk-v2-1-6222fbc2916b@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-11clk: qcom: Add Global Clock controller (GCC) driver for IPQ5018Sricharan Ramabadhran
Add support for the global clock controller found on IPQ5018 based devices. Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org> Co-developed-by: Varadarajan Narayanan <quic_varada@quicinc.com> Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> Co-developed-by: Gokul Sriram Palanisamy <quic_gokulsri@quicinc.com> Signed-off-by: Gokul Sriram Palanisamy <quic_gokulsri@quicinc.com> Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com> Link: https://lore.kernel.org/r/1690533192-22220-3-git-send-email-quic_srichara@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-11Merge branch '1690533192-22220-2-git-send-email-quic_srichara@quicinc.com' ↵Bjorn Andersson
into clk-for-6.6 Merge the IPQ5018 GCC Devicetree binding through a topic branch, in order to the the clock defines.
2023-08-11dt-bindings: clock: Add IPQ5018 clock and resetSricharan Ramabadhran
This patch adds support for the global clock controller found on the IPQ5018 based devices. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Co-developed-by: Varadarajan Narayanan <quic_varada@quicinc.com> Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com> Link: https://lore.kernel.org/r/1690533192-22220-2-git-send-email-quic_srichara@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-10clk: rockchip: rv1126: Add PD_VO clock treeJagan Teki
PD_VO clock tree diagram in RV1126 is connected to - BIU_VO - VOP - RGA - IEP - DSIHOST Add entire PD_VO clock tree for rv1126. Signed-off-by: Jagan Teki <jagan@edgeble.ai> Link: https://lore.kernel.org/r/20230731110012.2913742-3-jagan@edgeble.ai Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2023-08-09Merge tag 'sunxi-clk-for-6.6-1' of ↵Stephen Boyd
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into clk-allwinner Pull Allwinner clk driver updates from Jernej Skrabec: - Convert sun9i-mmc clock to use devm_platform_get_and_ioremap_resource() - Fix function name in a comment in ccu_mmc_timing.c * tag 'sunxi-clk-for-6.6-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: clk: sunxi-ng: Modify mismatched function name clk: sunxi: sun9i-mmc: Use devm_platform_get_and_ioremap_resource()
2023-08-09Merge tag 'clk-meson-v6.6-1' of https://github.com/BayLibre/clk-meson into ↵Stephen Boyd
clk-amlogic Pull Amlogic clk driver updates from Jerome Brunet: - dt-bindings: expose all Amlogic clock ids - Migrate Amlogic gxbb clock controllers dt-bindings to schema * tag 'clk-meson-v6.6-1' of https://github.com/BayLibre/clk-meson: (22 commits) dt-bindings: soc: amlogic: document System Control registers dt-bindings: clock: amlogic: convert amlogic,gxbb-aoclkc.txt to dt-schema dt-bindings: clock: amlogic: convert amlogic,gxbb-clkc.txt to dt-schema clk: meson: axg-audio: move bindings include to main driver clk: meson: meson8b: move bindings include to main driver clk: meson: a1: move bindings include to main driver clk: meson: eeclk: move bindings include to main driver clk: meson: aoclk: move bindings include to main driver dt-bindings: clk: axg-audio-clkc: expose all clock ids dt-bindings: clk: amlogic,a1-pll-clkc: expose all clock ids dt-bindings: clk: amlogic,a1-peripherals-clkc: expose all clock ids dt-bindings: clk: meson8b-clkc: expose all clock ids dt-bindings: clk: g12a-aoclkc: expose all clock ids dt-bindings: clk: g12a-clks: expose all clock ids dt-bindings: clk: axg-clkc: expose all clock ids dt-bindings: clk: gxbb-clkc: expose all clock ids clk: meson: migrate axg-audio out of hw_onecell_data to drop NR_CLKS clk: meson: migrate meson8b out of hw_onecell_data to drop NR_CLKS clk: meson: migrate a1 clock drivers out of hw_onecell_data to drop NR_CLKS clk: meson: migrate meson-aoclk out of hw_onecell_data to drop NR_CLKS ...
2023-08-09clk: sunxi-ng: nkm: Prefer current parent rateFrank Oltmanns
Similar to ccu_mp, if the current parent rate allows getting the ideal rate, prefer to not change the parent clock's rate. Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Frank Oltmanns <frank@oltmanns.dev> Link: https://lore.kernel.org/r/20230807-pll-mipi_set_rate_parent-v6-11-f173239a4b59@oltmanns.dev Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2023-08-09clk: sunxi-ng: a64: select closest rate for pll-video0Frank Oltmanns
Selecting the closest rate for pll-video0 instead of the closest rate that is less than the requested rate has no downside for this clock, while allowing for selecting a more suitable rate, e.g. for the connected panels. Furthermore, the algorithm that sets an NKM clock's parent benefits from the closest rate. Without it, the NKM clock's rate might drift away from the requested rate in the multiple successive calls to ccu_nkm_determine_rate that the clk framework performs when setting a clock rate. Therefore, configure pll-video0 and, in consequence, all of its descendents to select the closest rate. Acked-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Frank Oltmanns <frank@oltmanns.dev> Link: https://lore.kernel.org/r/20230807-pll-mipi_set_rate_parent-v6-10-f173239a4b59@oltmanns.dev Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2023-08-09clk: sunxi-ng: div: Support finding closest rateFrank Oltmanns
Add initalization macros for divisor clocks with mux (SUNXI_CCU_M_WITH_MUX) to support finding the closest rate. This clock type requires the appropriate flags to be set in the .common structure (for the mux part of the clock) and the .div part. Acked-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Frank Oltmanns <frank@oltmanns.dev> Link: https://lore.kernel.org/r/20230807-pll-mipi_set_rate_parent-v6-9-f173239a4b59@oltmanns.dev Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2023-08-09clk: sunxi-ng: mux: Support finding closest rateFrank Oltmanns
When finding the best rate for a mux clock, consider rates that are higher than the requested rate when CCU_FEATURE_ROUND_CLOSEST is used. Furthermore, introduce an initialization macro that sets this flag. Acked-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Frank Oltmanns <frank@oltmanns.dev> Link: https://lore.kernel.org/r/20230807-pll-mipi_set_rate_parent-v6-8-f173239a4b59@oltmanns.dev Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2023-08-09clk: sunxi-ng: nkm: Support finding closest rateFrank Oltmanns
When finding the best rate for a NKM clock, consider rates that are higher than the requested rate, if the CCU_FEATURE_CLOSEST_RATE flag is set by using the helper function ccu_is_better_rate(). Accommodate ccu_mux_helper_determine_rate to this change. Acked-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Frank Oltmanns <frank@oltmanns.dev> Link: https://lore.kernel.org/r/20230807-pll-mipi_set_rate_parent-v6-7-f173239a4b59@oltmanns.dev Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2023-08-09clk: sunxi-ng: nm: Support finding closest rateFrank Oltmanns
Use the helper function ccu_is_better_rate() to determine the rate that is closest to the requested rate, thereby supporting rates that are higher than the requested rate if the clock uses the CCU_FEATURE_CLOSEST_RATE. Add the macro SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK_MIN_MAX_CLOSEST which sets CCU_FEATURE_CLOSEST_RATE. To avoid code duplication, add the macros SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK_MIN_MAX_FEAT that allows selecting arbitrary features and use it in the original SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK_MIN_MAX as well as the newly introduced SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK_MIN_MAX_CLOSEST macros. Acked-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Frank Oltmanns <frank@oltmanns.dev> Link: https://lore.kernel.org/r/20230807-pll-mipi_set_rate_parent-v6-6-f173239a4b59@oltmanns.dev Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2023-08-09clk: sunxi-ng: Add helper function to find closest rateFrank Oltmanns
The default behaviour of clocks in the sunxi-ng driver is to select a clock rate that is closest to but less than the requested rate. Add the ccu_is_better_rate() helper function that - depending on the fact if thc CCU_FEATURE_CLOSEST_RATE flag is set - decides if a rate is closer than another rate. Acked-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Frank Oltmanns <frank@oltmanns.dev> Link: https://lore.kernel.org/r/20230807-pll-mipi_set_rate_parent-v6-5-f173239a4b59@oltmanns.dev Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2023-08-09clk: sunxi-ng: Add feature to find closest rateFrank Oltmanns
The default behaviour of clocks in the sunxi-ng driver is to select a clock rate that is closest to but less than the requested rate. Add the CCU_FEATURE_CLOSEST_RATE flag, which can be used to allow clocks to find the closest rate instead. Acked-by: Maxime Ripard <mripard@kernel.org> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Frank Oltmanns <frank@oltmanns.dev> Link: https://lore.kernel.org/r/20230807-pll-mipi_set_rate_parent-v6-4-f173239a4b59@oltmanns.dev Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2023-08-09clk: sunxi-ng: a64: allow pll-mipi to set parent's rateFrank Oltmanns
The nkm clock now supports setting the parent's rate. Utilize this option to find the optimal rate for pll-mipi. Acked-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Frank Oltmanns <frank@oltmanns.dev> Link: https://lore.kernel.org/r/20230807-pll-mipi_set_rate_parent-v6-3-f173239a4b59@oltmanns.dev Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2023-08-09clk: sunxi-ng: nkm: consider alternative parent rates when determining rateFrank Oltmanns
In case the CLK_SET_RATE_PARENT flag is set, consider using a different parent rate when determining a new rate. To find the best match for the requested rate, perform the following steps for each NKM combination: - calculate the optimal parent rate, - find the best parent rate that the parent clock actually supports - use that parent rate to calculate the effective rate. In case the clk does not support setting the parent rate, use the same algorithm as before. Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Frank Oltmanns <frank@oltmanns.dev> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Link: https://lore.kernel.org/r/20230807-pll-mipi_set_rate_parent-v6-2-f173239a4b59@oltmanns.dev Signed-off-by: Chen-Yu Tsai <wens@csie.org>
generated by cgit (git 2.34.1) at 2025-09-12 07:39:19 +0000