summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-04-20drm/i915: Convert the power well descriptor domain mask to an array of domainsImre Deak
The next patch converts the i915_power_well_desc::domain mask from a u64 mask to a bitmap. I didn't find a reasonably simple way to initialize bitmaps statically, so prepare for the next patch here by converting the masks to an array of domain enums and initing the masks from these arrays during module loading. v2: Clarify list vs. array in the commit message. (Jani) Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Jouni Högander <jouni.hogander@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220414210657.1785773-8-imre.deak@intel.com
2022-04-20drm/i915: Sanitize the power well namesImre Deak
Use the shortest descriptive name for all power wells for simplicity and to use the same name for the same type of power wells on multiple platforms. Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Jouni Högander <jouni.hogander@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220414210657.1785773-7-imre.deak@intel.com
2022-04-20drm/i915: Rename the power domain names to end with pipes/portsImre Deak
Make all power domain names end with the pipe/port instance for consistency. No functional changes. Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Jouni Högander <jouni.hogander@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220414210657.1785773-6-imre.deak@intel.com
2022-04-20drm/i915: Move the HSW power well flags to a common bitfieldImre Deak
Save some space by grouping the HSW power well descriptor flags along with other flags in one bitfield. This change also lets simplifying the definition of power well descriptors sharing the same flags in an upcoming patch. Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Jouni Högander <jouni.hogander@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220414210657.1785773-5-imre.deak@intel.com
2022-04-20drm/i915: Move the dg2 fixed_enable_delay power well param to a common bitfieldImre Deak
The DG2 fixed delay duration is always 600usec, so save some space in the power well descriptors by converting the parameter to a flag. While at it also use a bitfield for both the always_on and fixed_enable_delay flag. This change also lets simplifying the definiton of power wells sharing the same flags in an upcoming patch. Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Jouni Högander <jouni.hogander@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220414210657.1785773-4-imre.deak@intel.com
2022-04-20drm/i915: Move the power domain->well mappings to intel_display_power_map.cImre Deak
Move the list of platform specific power domain -> power well definitions to intel_display_power_map.c. While at it group the platforms' power domain macros with the corresponding power well lists and keep all the power domain lists in the same order (matching the enum order). No functional changes. v2: - s/intel_display_power_internal.h/intel_display_power_map.h/ (Jani) - Simplify intel_cleanup_power_wells(). - Don't move intel_display_power_domain_str(). v3: - Rename intel_init/cleanup_power_wells() to intel_display_power_map_init/cleanup(). - Add documentation to intel_display_power_map_init/cleanup(). Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Jouni Högander <jouni.hogander@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220414210657.1785773-3-imre.deak@intel.com
2022-04-20drm/i915: Unexport the for_each_power_well() macrosImre Deak
The for_each_power_well() macros are only used in intel_display_power.c and intel_display_power_well.c, so unexport them. Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Jouni Högander <jouni.hogander@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220414210657.1785773-2-imre.deak@intel.com
2022-04-20drm/i915: Move per-platform power well hooks to intel_display_power_well.cImre Deak
Move the implementation of platform specific power well hooks to intel_display_power_well.c, to reduce the clutter in intel_display_power.c. The locking of all the power domain/power well state is handled in the power domain functions in intel_display_power.c using i915_power_domains::lock. This patch also moves the chy_phy_powergate_ch/lanes() functions to intel_display_power_well.c which borrow the same lock to protect the DISPLAY_PHY_CONTROL register state, which the HW uses both for toggling power wells and power gating PHY lanes. No functional change. v2: - Clarify in the commit log why CHV functions using the i915_power_domains::lock were moved, while others locking the power domain/well state were kept in intel_display_power.c . (Jouni) - Move forward declaration of chv_phy_powergate_ch/lanes() to intel_display_power_well.h . Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Jouni Högander <jouni.hogander@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220414210657.1785773-1-imre.deak@intel.com
2022-04-20arch_topology: Do not set llc_sibling if llc_id is invalidWang Qing
When ACPI is not enabled, cpuid_topo->llc_id = cpu_topo->llc_id = -1, which will set llc_sibling 0xff(...), this is misleading. Don't set llc_sibling(default 0) if we don't know the cache topology. Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Wang Qing <wangqing@vivo.com> Fixes: 37c3ec2d810f ("arm64: topology: divorce MC scheduling domain from core_siblings") Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/1649644580-54626-1-git-send-email-wangqing@vivo.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-20topology: make core_mask include at least cluster_siblingsDarren Hart
Ampere Altra defines CPU clusters in the ACPI PPTT. They share a Snoop Control Unit, but have no shared CPU-side last level cache. cpu_coregroup_mask() will return a cpumask with weight 1, while cpu_clustergroup_mask() will return a cpumask with weight 2. As a result, build_sched_domain() will BUG() once per CPU with: BUG: arch topology borken the CLS domain not a subset of the MC domain The MC level cpumask is then extended to that of the CLS child, and is later removed entirely as redundant. This sched domain topology is an improvement over previous topologies, or those built without SCHED_CLUSTER, particularly for certain latency sensitive workloads. With the current scheduler model and heuristics, this is a desirable default topology for Ampere Altra and Altra Max system. Rather than create a custom sched domains topology structure and introduce new logic in arch/arm64 to detect these systems, update the core_mask so coregroup is never a subset of clustergroup, extending it to cluster_siblings if necessary. Only do this if CONFIG_SCHED_CLUSTER is enabled to avoid also changing the topology (MC) when CONFIG_SCHED_CLUSTER is disabled. This has the added benefit over a custom topology of working for both symmetric and asymmetric topologies. It does not address systems where the CLUSTER topology is above a populated MC topology, but these are not considered today and can be addressed separately if and when they appear. The final sched domain topology for a 2 socket Ampere Altra system is unchanged with or without CONFIG_SCHED_CLUSTER, and the BUG is avoided: For CPU0: CONFIG_SCHED_CLUSTER=y CLS [0-1] DIE [0-79] NUMA [0-159] CONFIG_SCHED_CLUSTER is not set DIE [0-79] NUMA [0-159] Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Vincent Guittot <vincent.guittot@linaro.org> Cc: D. Scott Phillips <scott@os.amperecomputing.com> Cc: Ilkka Koskinen <ilkka@os.amperecomputing.com> Cc: <stable@vger.kernel.org> # 5.16.x Suggested-by: Barry Song <song.bao.hua@hisilicon.com> Reviewed-by: Barry Song <song.bao.hua@hisilicon.com> Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Darren Hart <darren@os.amperecomputing.com> Link: https://lore.kernel.org/r/c8fe9fce7c86ed56b4c455b8c902982dc2303868.1649696956.git.darren@os.amperecomputing.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-20topology/sysfs: Hide PPIN on systems that do not support it.Tony Luck
Systems that do not support a Protected Processor Identification Number currently report: # cat /sys/devices/system/cpu/cpu0/topology/ppin 0x0 which is confusing/wrong. Add a ".is_visible" function to suppress inclusion of the ppin file. Fixes: ab28e944197f ("topology/sysfs: Add PPIN in sysfs under cpu topology") Signed-off-by: Tony Luck <tony.luck@intel.com> Link: https://lore.kernel.org/r/20220406220150.63855-1-tony.luck@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-20drm/i915/dg2: Add workaround 18019627453José Roberto de Souza
A new DG2 workaround added to fix some corner cases hangs. v2: - implementing the second and preferred option for this workaround BSpec: 54077 BSpec: 68173 BSpec: 71488 Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220419182753.364237-2-jose.souza@intel.com
2022-04-20drm/solomon: Add SSD130x OLED displays SPI supportJavier Martinez Canillas
The ssd130x driver only provides the core support for these devices but it does not have any bus transport logic. Add a driver to interface over SPI. There is a difference in the communication protocol when using 4-wire SPI instead of I2C. For the latter, a control byte that contains a D/C# field has to be sent. This field tells the controller whether the data has to be written to the command register or to the graphics display data memory. But for 4-wire SPI that control byte is not used, instead a real D/C# line must be pulled HIGH for commands data and LOW for graphics display data. For this reason the standard SPI regmap can't be used and a custom .write bus handler is needed. Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Mark Brown <broonie@kernel.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://patchwork.freedesktop.org/patch/msgid/20220419214824.335075-6-javierm@redhat.com
2022-04-20drm/solomon: Move device info from ssd130x-i2c to the core driverJavier Martinez Canillas
These are declared in the ssd130x-i2c transport driver but the information is not I2C specific, and could be used by other SSD130x transport drivers. Move them to the ssd130x core driver and just set the OF device entries to an ID that could be used to lookup the correct device info from an array. While being there, also move the SSD130X_DATA and SSD130X_COMMAND control bytes. Since even though they are used by the I2C interface, they could also be useful for other transport protocols such as SPI. Suggested-by: Chen-Yu Tsai <wens@kernel.org> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Mark Brown <broonie@kernel.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://patchwork.freedesktop.org/patch/msgid/20220419214824.335075-5-javierm@redhat.com
2022-04-20drm/solomon: Add ssd130x new compatible strings and deprecate old ones.Javier Martinez Canillas
The current compatible strings for SSD130x I2C controllers contain an "fb" and "-i2c" suffixes. These have been deprecated and more correct ones were added, that don't encode a subsystem or bus used to interface the devices. Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Mark Brown <broonie@kernel.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://patchwork.freedesktop.org/patch/msgid/20220419214824.335075-4-javierm@redhat.com
2022-04-20dt-bindings: display: ssd1307fb: Extend schema for SPI controllersJavier Martinez Canillas
The Solomon SSD130x OLED displays can either have an I2C or SPI interface, add to the schema the properties and examples for OLED devices under SPI. Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Mark Brown <broonie@kernel.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220419214824.335075-3-javierm@redhat.com
2022-04-20dt-bindings: display: ssd1307fb: Deprecate "-i2c" compatible stringsJavier Martinez Canillas
The current compatible strings for SSD130x I2C controllers contain both an "fb" and "-i2c" suffixes. It seems to indicate that are for a fbdev driver and also that are for devices that can be accessed over an I2C bus. But a DT is supposed to describe the hardware and not Linux implementation details. So let's deprecate those compatible strings and add new ones that only contain the vendor and device name, without any of these suffixes. These will just describe the device and can be matched by both I2C and SPI DRM drivers. The required properties should still be enforced for old ones. While being there, just drop the "sinowealth,sh1106-i2c" compatible string since that was never present in a released Linux version. Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Mark Brown <broonie@kernel.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220419214824.335075-2-javierm@redhat.com
2022-04-20drm/i915/display: Add workaround 22014263786José Roberto de Souza
This workaround fixes screen flickers with FBC. BSpec: 33450 BSpec: 52890 BSpec: 54369 BSpec: 66624 Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220419182753.364237-1-jose.souza@intel.com
2022-04-20tty: n_gsm: fix missing update of modem controls after DLCI openDaniel Starke
Currently the peer is not informed about the initial state of the modem control lines after a new DLCI has been opened. Fix this by sending the initial modem control line states after DLCI open. Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220420101346.3315-1-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-20selftests: mlxsw: vxlan_flooding_ipv6: Prevent flooding of unwanted packetsIdo Schimmel
The test verifies that packets are correctly flooded by the bridge and the VXLAN device by matching on the encapsulated packets at the other end. However, if packets other than those generated by the test also ingress the bridge (e.g., MLD packets), they will be flooded as well and interfere with the expected count. Make the test more robust by making sure that only the packets generated by the test can ingress the bridge. Drop all the rest using tc filters on the egress of 'br0' and 'h1'. In the software data path, the problem can be solved by matching on the inner destination MAC or dropping unwanted packets at the egress of the VXLAN device, but this is not currently supported by mlxsw. Fixes: d01724dd2a66 ("selftests: mlxsw: spectrum-2: Add a test for VxLAN flooding with IPv6") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-20selftests: mlxsw: vxlan_flooding: Prevent flooding of unwanted packetsIdo Schimmel
The test verifies that packets are correctly flooded by the bridge and the VXLAN device by matching on the encapsulated packets at the other end. However, if packets other than those generated by the test also ingress the bridge (e.g., MLD packets), they will be flooded as well and interfere with the expected count. Make the test more robust by making sure that only the packets generated by the test can ingress the bridge. Drop all the rest using tc filters on the egress of 'br0' and 'h1'. In the software data path, the problem can be solved by matching on the inner destination MAC or dropping unwanted packets at the egress of the VXLAN device, but this is not currently supported by mlxsw. Fixes: 94d302deae25 ("selftests: mlxsw: Add a test for VxLAN flooding") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-20drm/i915: Program i830 DPLL FP register laterVille Syrjälä
Follow the new i9xx DPLL FP register programming sequence introduced in commit 62d66b218386 ("drm/i915: Fold i9xx_set_pll_dividers() into i9xx_enable_pll()") in the i830 "power well" code as well. Just for consistency. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220321195006.775-2-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2022-04-20drm/i915: program wm blocks to at least blocks required per lineVinod Govindapillai
In configurations with single DRAM channel, for usecases like 4K 60 Hz, FIFO underruns are observed quite frequently. Looks like the wm0 watermark values need to bumped up because the wm0 memory latency calculations are probably not taking the DRAM channel's impact into account. As per the Bspec 49325, if the ddb allocation can hold at least one plane_blocks_per_line we should have selected method2. Assuming that modern HW versions have enough dbuf to hold at least one line, set the wm blocks to equivalent to blocks per line. v2: styling and comments changes (Ville) v3: Updated the reviewed-by tag v4: max_t to max and patch styling (Ville) References: https://gitlab.freedesktop.org/drm/intel/-/issues/4321 Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com> Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220417093105.729014-1-vinod.govindapillai@intel.com
2022-04-20drm/i915: Fix DISP_POS_Y and DISP_HEIGHT definesHans de Goede
Commit 428cb15d5b00 ("drm/i915: Clean up pre-skl primary plane registers") introduced DISP_POS_Y and DISP_HEIGHT defines but accidentally set these their masks to REG_GENMASK(31, 0) instead of REG_GENMASK(31, 16). This breaks the primary display pane on at least pineview machines, fix the mask to fix the primary display pane only showing black. Tested on an Acer One AO532h with an Intel N450 SoC. Fixes: 428cb15d5b00 ("drm/i915: Clean up pre-skl primary plane registers") Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220418150936.5499-1-hdegoede@redhat.com Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
2022-04-20ALSA: usb-audio: Clear MIDI port active flag after drainingTakashi Iwai
When a rawmidi output stream is closed, it calls the drain at first, then does trigger-off only when the drain returns -ERESTARTSYS as a fallback. It implies that each driver should turn off the stream properly after the drain. Meanwhile, USB-audio MIDI interface didn't change the port->active flag after the drain. This may leave the output work picking up the port that is closed right now, which eventually leads to a use-after-free for the already released rawmidi object. This patch fixes the bug by properly clearing the port->active flag after the output drain. Reported-by: syzbot+70e777a39907d6d5fd0a@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/00000000000011555605dceaff03@google.com Link: https://lore.kernel.org/r/20220420130247.22062-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-04-20dt-bindings: dmaengine: qcom: gpi: Add minItems for interruptsVinod Koul
Add the minItems for interrupts property as well. In the absence of this, we get warning if interrupts are less than 13 arch/arm64/boot/dts/qcom/qrb5165-rb5.dtb: dma-controller@800000: interrupts: [[0, 588, 4], [0, 589, 4], [0, 590, 4], [0, 591, 4], [0, 592, 4], [0, 593, 4], [0, 594, 4], [0, 595, 4], [0, 596, 4], [0, 597, 4]] is too short Signed-off-by: Vinod Koul <vkoul@kernel.org> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220414064235.1182195-1-vkoul@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-04-20nfc: MAINTAINERS: add Bug entryKrzysztof Kozlowski
Add a Bug section, indicating preferred mailing method for bug reports, to NFC Subsystem entry. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-20dmaengine: idxd: skip clearing device context when device is read-onlyDave Jiang
If the device shows up as read-only configuration, skip the clearing of the state as the context must be preserved for device re-enable after being disabled. Fixes: 0dcfe41e9a4c ("dmanegine: idxd: cleanup all device related bits after disabling device") Reported-by: Tony Zhu <tony.zhu@intel.com> Tested-by: Tony Zhu <tony.zhu@intel.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/164971479479.2200566.13980022473526292759.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-04-20dmaengine: idxd: add RO check for wq max_transfer_size writeDave Jiang
Block wq_max_transfer_size_store() when the device is configured as read-only and not configurable. Fixes: d7aad5550eca ("dmaengine: idxd: add support for configurable max wq xfer size") Reported-by: Bernice Zhang <bernice.zhang@intel.com> Tested-by: Bernice Zhang <bernice.zhang@intel.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/164971488154.2200913.10706665404118545941.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-04-20dmaengine: idxd: add RO check for wq max_batch_size writeDave Jiang
Block wq_max_batch_size_store() when the device is configured as read-only and not configurable. Fixes: e7184b159dd3 ("dmaengine: idxd: add support for configurable max wq batch size") Reported-by: Bernice Zhang <bernice.zhang@intel.com> Tested-by: Bernice Zhang <bernice.zhang@intel.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/164971493551.2201159.1942042593642155209.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-04-20dmaengine: idxd: fix retry value to be constant for duration of function callDave Jiang
When retries is compared to wq->enqcmds_retries each loop of idxd_enqcmds(), wq->enqcmds_retries can potentially changed by user. Assign the value of retries to wq->enqcmds_retries during initialization so it is the original value set when entering the function. Fixes: 7930d8553575 ("dmaengine: idxd: add knob for enqcmds retries") Suggested-by: Dave Hansen <dave.hansen@intel.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/165031760154.3658664.1983547716619266558.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-04-20dmaengine: idxd: match type for retries var in idxd_enqcmds()Dave Jiang
wq->enqcmds_retries is defined as unsigned int. However, retries on the stack is defined as int. Change retries to unsigned int to compare the same type. Fixes: 7930d8553575 ("dmaengine: idxd: add knob for enqcmds retries") Suggested-by: Thiago Macieira <thiago.macieira@intel.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/165031747059.3658198.6035308204505664375.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-04-20dmaengine: dw-edma: Fix inconsistent indentingJiapeng Chong
Eliminate the follow smatch warning: drivers/dma/dw-edma/dw-edma-v0-core.c:419 dw_edma_v0_core_start() warn: inconsistent indenting. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Link: https://lore.kernel.org/r/20220413023442.18856-1-jiapeng.chong@linux.alibaba.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-04-20net: stmmac: Use readl_poll_timeout_atomic() in atomic stateKevin Hao
The init_systime() may be invoked in atomic state. We have observed the following call trace when running "phc_ctl /dev/ptp0 set" on a Intel Agilex board. BUG: sleeping function called from invalid context at drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c:74 in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 381, name: phc_ctl preempt_count: 1, expected: 0 RCU nest depth: 0, expected: 0 Preemption disabled at: [<ffff80000892ef78>] stmmac_set_time+0x34/0x8c CPU: 2 PID: 381 Comm: phc_ctl Not tainted 5.18.0-rc2-next-20220414-yocto-standard+ #567 Hardware name: SoCFPGA Agilex SoCDK (DT) Call trace: dump_backtrace.part.0+0xc4/0xd0 show_stack+0x24/0x40 dump_stack_lvl+0x7c/0xa0 dump_stack+0x18/0x34 __might_resched+0x154/0x1c0 __might_sleep+0x58/0x90 init_systime+0x78/0x120 stmmac_set_time+0x64/0x8c ptp_clock_settime+0x60/0x9c pc_clock_settime+0x6c/0xc0 __arm64_sys_clock_settime+0x88/0xf0 invoke_syscall+0x5c/0x130 el0_svc_common.constprop.0+0x4c/0x100 do_el0_svc+0x7c/0xa0 el0_svc+0x58/0xcc el0t_64_sync_handler+0xa4/0x130 el0t_64_sync+0x18c/0x190 So we should use readl_poll_timeout_atomic() here instead of readl_poll_timeout(). Also adjust the delay time to 10us to fix a "__bad_udelay" build error reported by "kernel test robot <lkp@intel.com>". I have tested this on Intel Agilex and NXP S32G boards, there is no delay needed at all. So the 10us delay should be long enough for most cases. Fixes: ff8ed737860e ("net: stmmac: use readl_poll_timeout() function in init_systime()") Signed-off-by: Kevin Hao <haokexin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-20doc/ip-sysctl: add bc_forwardingNicolas Dichtel
Let's describe this sysctl. Fixes: 5cbf777cfdf6 ("route: add support for directed broadcast forwarding") Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-20phy: amlogic: fix error path in phy_g12a_usb3_pcie_probe()Heiner Kallweit
If clk_prepare_enable() fails we call clk_disable_unprepare() in the error path what results in a warning that the clock is disabled and unprepared already. And if we fail later in phy_g12a_usb3_pcie_probe() then we bail out w/o calling clk_disable_unprepare(). This patch fixes both errors. Fixes: 36077e16c050 ("phy: amlogic: Add Amlogic G12A USB3 + PCIE Combo PHY Driver") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/8e416f95-1084-ee28-860e-7884f7fa2e32@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-04-20RISC-V: KVM: Restrict the extensions that can be disabledAtish Patra
Currently, the config isa register allows us to disable all allowed single letter ISA extensions. It shouldn't be the case as vmm shouldn't be able to disable base extensions (imac). These extensions should always be enabled as long as they are enabled in the host ISA. Signed-off-by: Atish Patra <atishp@rivosinc.com> Signed-off-by: Anup Patel <anup@brainfault.org> Fixes: 92ad82002c39 ("RISC-V: KVM: Implement KVM_GET_ONE_REG/KVM_SET_ONE_REG ioctls")
2022-04-20drm/vc4: Fix build error when CONFIG_DRM_VC4=y && CONFIG_RASPBERRYPI_FIRMWARE=mZheng Bin
If CONFIG_DRM_VC4=y, CONFIG_RASPBERRYPI_FIRMWARE=m, CONFIG_COMPILE_TEST=n, bulding fails: drivers/gpu/drm/vc4/vc4_drv.o: In function `vc4_drm_bind': vc4_drv.c:(.text+0x320): undefined reference to `rpi_firmware_get' vc4_drv.c:(.text+0x320): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `rpi_firmware_get' vc4_drv.c:(.text+0x34c): undefined reference to `rpi_firmware_property' vc4_drv.c:(.text+0x34c): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `rpi_firmware_property' vc4_drv.c:(.text+0x354): undefined reference to `rpi_firmware_put' vc4_drv.c:(.text+0x354): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `rpi_firmware_put' Make DRM_VC4 depends on RASPBERRYPI_FIRMWARE || (COMPILE_TEST && !RASPBERRYPI_FIRMWARE) to fix this. Fixes: c406ad5e4a85 ("drm/vc4: Notify the firmware when DRM is in charge") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zheng Bin <zhengbin13@huawei.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220411024325.3968413-1-zhengbin13@huawei.com
2022-04-20drm/panel/raspberrypi-touchscreen: Initialise the bridge in prepareDave Stevenson
The panel has a prepare call which is before video starts, and an enable call which is after. The Toshiba bridge should be configured before video, so move the relevant power and initialisation calls to prepare. Fixes: 2f733d6194bd ("drm/panel: Add support for the Raspberry Pi 7" Touchscreen.") Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220415162513.42190-3-stefan.wahren@i2se.com
2022-04-20drm/panel/raspberrypi-touchscreen: Avoid NULL deref if not initialisedDave Stevenson
If a call to rpi_touchscreen_i2c_write from rpi_touchscreen_probe fails before mipi_dsi_device_register_full is called, then in trying to log the error message if uses ts->dsi->dev when it is still NULL. Use ts->i2c->dev instead, which is initialised earlier in probe. Fixes: 2f733d6194bd ("drm/panel: Add support for the Raspberry Pi 7" Touchscreen.") Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220415162513.42190-2-stefan.wahren@i2se.com
2022-04-20RISC-V: KVM: Remove 's' & 'u' as valid ISA extensionAtish Patra
There are no ISA extension defined as 's' & 'u' in RISC-V specifications. The misa register defines 's' & 'u' bit as Supervisor/User privilege mode enabled. But it should not appear in the ISA extension in the device tree. Remove those from the allowed ISA extension for kvm. Fixes: a33c72faf2d7 ("RISC-V: KVM: Implement VCPU create, init and destroy functions") Signed-off-by: Atish Patra <atishp@rivosinc.com> Signed-off-by: Anup Patel <anup@brainfault.org>
2022-04-20fbdev: Warn in hot-unplug workaround for framebuffers without deviceThomas Zimmermann
A workaround makes fbdev hot-unplugging work for framebuffers without device. The only user for this feature was offb. As each OF framebuffer now has an associated platform device, the workaround hould no longer be triggered. Update it with a warning and rewrite the comment. Fbdev drivers that trigger the hot-unplug workaround really need to be fixed. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Suggested-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220419100405.12600-3-tzimmermann@suse.de
2022-04-20of: Create platform devices for OF framebuffersThomas Zimmermann
Create a platform device for each OF-declared framebuffer and have offb bind to these devices. Allows for real hot-unplugging and other drivers besides offb. Originally, offb created framebuffer devices while initializing its module by parsing the OF device tree. No actual Linux device was set up. This tied OF framebuffers to offb and makes writing other drivers for the OF framebuffers complicated. The absence of a Linux device further prevented real hot-unplugging. Adding a distinct platform device for each OF framebuffer solves both problems. Specifically, a DRM driver can now provide graphics output for modern userspace. Some of the offb init code is now located in the OF initialization. There's now also an implementation of of_platform_default_populate_init(), which was missing before. The OF side creates different devices for either OF display nodes or BootX displays as they require different handling by the driver. The offb drivers picks up each type of device and runs the appropriate fbdev initialization. Tested with OF display nodes on qemu's ppc64le target. v3: * declare variable 'node' with function scope (Rob) v2: * run PPC code as part of existing initialization (Rob) * add a few more error warnings (Javier) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220419100405.12600-2-tzimmermann@suse.de
2022-04-20USB: serial: cp210x: add PIDs for Kamstrup USB Meter ReaderBruno Thomsen
Wireless reading of water and heat meters using 868 MHz wM-Bus mode C1. The two different product IDs allow detection of dongle antenna solution: - Internal antenna - External antenna using SMA connector https://www.kamstrup.com/en-en/water-solutions/water-meter-reading/usb-meter-reader Signed-off-by: Bruno Thomsen <bruno.thomsen@gmail.com> Link: https://lore.kernel.org/r/20220414081202.5591-1-bruno.thomsen@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2022-04-20USB: serial: option: add support for Cinterion MV32-WA/MV32-WBSlark Xiao
Add support for Cinterion device MV32-WA/MV32-WB. MV32-WA PID is 0x00F1, and MV32-WB PID is 0x00F2. Test evidence as below: T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 4 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1 P: Vendor=1e2d ProdID=00f1 Rev=05.04 S: Manufacturer=Cinterion S: Product=Cinterion PID 0x00F1 USB Mobile Broadband S: SerialNumber=78ada8c4 C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option I: If#=0x3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 3 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1 P: Vendor=1e2d ProdID=00f2 Rev=05.04 S: Manufacturer=Cinterion S: Product=Cinterion PID 0x00F2 USB Mobile Broadband S: SerialNumber=cdd06a78 C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option I: If#=0x3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option Interface 0&1: MBIM, 2:Modem, 3: GNSS, 4: NMEA, 5: Diag GNSS port don't use serial driver. Signed-off-by: Slark Xiao <slark_xiao@163.com> Link: https://lore.kernel.org/r/20220414074434.5699-1-slark_xiao@163.com Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2022-04-20drm/gma500: fix a potential repeat execution in psb_driver_loadXiaomeng Tong
Instead of exiting the loop as expected when an entry is found, the list_for_each_entry() continues until the traversal is complete. To avoid potential executing 'ret = gma_backlight_init(dev);' repeatly, goto outside the loop when found entry by replacing switch/case with if statement. Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com> Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> [Fixed indentation] Link: https://patchwork.freedesktop.org/patch/msgid/20220413051105.5612-1-xiam0nd.tong@gmail.com
2022-04-20drm/i915/display/psr: Unset enable_psr2_sel_fetch if other checks in ↵José Roberto de Souza
intel_psr2_config_valid() fails If any of the PSR2 checks after intel_psr2_sel_fetch_config_valid() fails, enable_psr2_sel_fetch will be kept enabled causing problems in the functions that only checks for it and not for has_psr2. So here moving the check that do not depend on enable_psr2_sel_fetch and for the remaning ones jumping to a section that unset enable_psr2_sel_fetch in case of failure to support PSR2. Fixes: 6e43e276b8c9 ("drm/i915: Initial implementation of PSR2 selective fetch") Cc: Jouni Högander <jouni.hogander@intel.com> Reviewed-by: Jouni Högander <jouni.hogander@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220414151118.21980-1-jose.souza@intel.com (cherry picked from commit 554ae8dce1268789e72767a67f0635cb743b3cea) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2022-04-19cpuidle: riscv: support non-SMP configRandy Dunlap
Add <asm/smp.h> for cpuid_to_hartid_map etc. This is needed for both SMP and non-SMP builds, but not having it causes a build error for non-SMP: drivers/cpuidle/cpuidle-riscv-sbi.c: In function 'sbi_cpuidle_init_cpu': drivers/cpuidle/cpuidle-riscv-sbi.c:350:26: error: implicit declaration of function 'cpuid_to_hartid_map' [-Werror=implicit-function-declaration] Fixes: 6abf32f1d9c5 ("cpuidle: Add RISC-V SBI CPU idle driver") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-04-19drm/i915/rpl-p: Add PCI IDsMatt Atwood
Adding initial PCI ids for RPL-P. RPL-P behaves identically to ADL-P from i915's point of view. Changes since V1 : - SUBPLATFORM ADL_N and RPL_P clash as both are ADLP based - Matthew R Bspec: 55376 Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com> Signed-off-by: Madhumitha Tolakanahalli Pradeep <madhumitha.tolakanahalli.pradeep@intel.com> Signed-off-by: Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com> [mattrope: Corrected comment formatting to match coding style] Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220418062157.2974665-1-tejaskumarx.surendrakumar.upadhyay@intel.com
2022-04-19objtool: Fix function fallthrough detection for vmlinuxJosh Poimboeuf
Objtool's function fallthrough detection only works on C objects. The distinction between C and assembly objects no longer makes sense with objtool running on vmlinux.o. Now that copy_user_64.S has been fixed up, and an objtool sibling call detection bug has been fixed, the asm code is in "compliance" and this hack is no longer needed. Remove it. Fixes: ed53a0d97192 ("x86/alternative: Use .ibt_endbr_seal to seal indirect calls") Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/b434cff98eca3a60dcc64c620d7d5d405a0f441c.1649718562.git.jpoimboe@redhat.com
generated by cgit (git 2.34.1) at 2025-09-23 06:10:24 +0000