| Age | Commit message (Collapse) | Author |
|---|
|
Swap the 1st and 2nd arguments to be consistent with the usage of
kvcalloc().
Fixes: c9b8fecddb5b ("KVM: use kvcalloc for array allocations")
Signed-off-by: Liao Chang <liaochang1@huawei.com>
Message-Id: <20221103011749.139262-1-liaochang1@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
kvm_zap_gfn_range() must be called in an SRCU read-critical section, but
there is no SRCU annotation in __kvm_set_or_clear_apicv_inhibit(). This
can lead to the following warning via
kvm_arch_vcpu_ioctl_set_guest_debug() if a Shadow MMU is in use (TDP
MMU disabled or nesting):
[ 1416.659809] =============================
[ 1416.659810] WARNING: suspicious RCU usage
[ 1416.659839] 6.1.0-dbg-DEV #1 Tainted: G S I
[ 1416.659853] -----------------------------
[ 1416.659854] include/linux/kvm_host.h:954 suspicious rcu_dereference_check() usage!
[ 1416.659856]
...
[ 1416.659904] dump_stack_lvl+0x84/0xaa
[ 1416.659910] dump_stack+0x10/0x15
[ 1416.659913] lockdep_rcu_suspicious+0x11e/0x130
[ 1416.659919] kvm_zap_gfn_range+0x226/0x5e0
[ 1416.659926] ? kvm_make_all_cpus_request_except+0x18b/0x1e0
[ 1416.659935] __kvm_set_or_clear_apicv_inhibit+0xcc/0x100
[ 1416.659940] kvm_arch_vcpu_ioctl_set_guest_debug+0x350/0x390
[ 1416.659946] kvm_vcpu_ioctl+0x2fc/0x620
[ 1416.659955] __se_sys_ioctl+0x77/0xc0
[ 1416.659962] __x64_sys_ioctl+0x1d/0x20
[ 1416.659965] do_syscall_64+0x3d/0x80
[ 1416.659969] entry_SYSCALL_64_after_hwframe+0x63/0xcd
Always take the KVM SRCU read lock in __kvm_set_or_clear_apicv_inhibit()
to protect the GFN to memslot translation. The SRCU read lock is not
technically required when no Shadow MMUs are in use, since the TDP MMU
walks the paging structures from the roots and does not need to look up
GFN translations in the memslots, but make the SRCU locking
unconditional for simplicty.
In most cases, the SRCU locking is taken care of in the vCPU run loop,
but when called through other ioctls (such as KVM_SET_GUEST_DEBUG)
there is no srcu_read_lock.
Tested: ran tools/testing/selftests/kvm/x86_64/debug_regs on a DBG
build. This patch causes the suspicious RCU warning to disappear.
Note that the warning is hit in __kvm_zap_rmaps(), so
kvm_memslots_have_rmaps() must return true in order for this to
repro (i.e. the TDP MMU must be off or nesting in use.)
Reported-by: Greg Thelen <gthelen@google.com>
Fixes: 36222b117e36 ("KVM: x86: don't disable APICv memslot when inhibited")
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20221102205359.1260980-1-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Don't populate the read-only const array uid_strings on the stack but
instead make it static. Also makes the object code a little smaller.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20221103120624.72583-1-colin.i.king@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
During initialisation DAPM tries to read the state of the MUX
being connected, resulting in this error log:
input-mux: ASoC: error at soc_component_read_no_lock on input-mux: -5
Provide a read function which allows DAPM to read the state of the
MUX.
Signed-off-by: Maarten Zanders <maarten.zanders@mind.be>
Link: https://lore.kernel.org/r/20221028191303.166115-1-maarten.zanders@mind.be
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Switch the driver from legacy gpio API that is deprecated to the newer
gpiod API that respects line polarities described in ACPI/DT.
The driver still tries to support shared reset lines, by first trying to
allocate the reset GPIO normally, and then non-exclusively, although the
utility of such support is questionable, toggling reset line from one
driver/instance will result in all chips being reset, potentially at an
inopportune moment.
Note that this change depends on commit fbbbcd177a27 ("gpiolib: of: add
quirk for locating reset lines with legacy bindings") to translate
request for "reset" GPIO to the legacy name "gpio-reset" in case when
proper name is not used.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/20221102232004.1721864-3-dmitry.torokhov@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/20221102232004.1721864-2-dmitry.torokhov@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
As of 0426370b58b2 ("ARM: dts: omap2420-n810: Correct the audio codec
(tlv320aic33) node") the DTS properly specifies reset GPIO, and the
device name in auxdata lookup table does not even match the one in
device tree anymore, so stop instantiating it.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20221102232004.1721864-1-dmitry.torokhov@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Having two DMICs, a front DMIC and a Rear DMIC,
but only host audio input AUX port0 is used for these two Dmics.
A "dmic-gpios" property is used for a mixer control to switch
the dmic signal source between the Front and Rear Dmic.
Refer to this one as an example,
commit 3cfbf07c6d27
("ASoC: qcom: sc7180: Modify machine driver for 2mic")
Signed-off-by: Ajye Huang <ajye_huang@compal.corp-partner.google.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221102125936.2176748-3-ajye_huang@compal.corp-partner.google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a property "dmic-gpios" for switching between two MICs.
Signed-off-by: Ajye Huang <ajye_huang@compal.corp-partner.google.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221102125936.2176748-2-ajye_huang@compal.corp-partner.google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When this driver is used with a driver that uses preallocated spi_transfer
structs. The speed_hz is halved by every run. This results in:
spi_stm32 44004000.spi: SPI transfer setup failed
ads7846 spi0.0: SPI transfer failed: -22
Example when running with DIV_ROUND_UP():
- First run; speed_hz = 1000000, spi->clk_rate 125000000
div 125 -> mbrdiv = 7, cur_speed = 976562
- Second run; speed_hz = 976562
div 128,00007 (roundup to 129) -> mbrdiv = 8, cur_speed = 488281
- Third run; speed_hz = 488281
div 256,000131072067109 (roundup to 257) and then -EINVAL is returned.
Use DIV_ROUND_CLOSEST to allow to round down and allow us to keep the
set speed.
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Link: https://lore.kernel.org/r/20221103080043.3033414-1-sean@geanix.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Stanislav reported a lockdep warning, which is caused by the
cancel_work_sync() called inside sock_map_close(), as analyzed
below by Jakub:
psock->work.func = sk_psock_backlog()
ACQUIRE psock->work_mutex
sk_psock_handle_skb()
skb_send_sock()
__skb_send_sock()
sendpage_unlocked()
kernel_sendpage()
sock->ops->sendpage = inet_sendpage()
sk->sk_prot->sendpage = tcp_sendpage()
ACQUIRE sk->sk_lock
tcp_sendpage_locked()
RELEASE sk->sk_lock
RELEASE psock->work_mutex
sock_map_close()
ACQUIRE sk->sk_lock
sk_psock_stop()
sk_psock_clear_state(psock, SK_PSOCK_TX_ENABLED)
cancel_work_sync()
__cancel_work_timer()
__flush_work()
// wait for psock->work to finish
RELEASE sk->sk_lock
We can move the cancel_work_sync() out of the sock lock protection,
but still before saved_close() was called.
Fixes: 799aa7f98d53 ("skmsg: Avoid lock_sock() in sk_psock_backlog()")
Reported-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20221102043417.279409-1-xiyou.wangcong@gmail.com
|
|
With recent sync of linux/in.h tools/include headers are now relying on
__DECLARE_FLEX_ARRAY macro, which isn't itself defined inside
tools/include headers anywhere and is instead assumed to be present in
system-wide UAPI header. This breaks isolated environments that don't
have kernel UAPI headers installed system-wide, like BPF CI ([0]).
To fix this, bring in include/uapi/linux/stddef.h into tools/include.
We can't just copy/paste it, though, it has to be processed with
scripts/headers_install.sh, which has a dependency on scripts/unifdef.
So the full command to (re-)generate stddef.h for inclusion into
tools/include directory is:
$ make scripts_unifdef && \
cp $KBUILD_OUTPUT/scripts/unifdef scripts/ && \
scripts/headers_install.sh include/uapi/linux/stddef.h tools/include/uapi/linux/stddef.h
This assumes KBUILD_OUTPUT envvar is set and used for out-of-tree builds.
[0] https://github.com/kernel-patches/bpf/actions/runs/3379432493/jobs/5610982609
Fixes: 036b8f5b8970 ("tools headers uapi: Update linux/in.h copy")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/bpf/20221102182517.2675301-2-andrii@kernel.org
|
|
__DECLARE_FLEX_ARRAY is defined in include/uapi/linux/stddef.h but
doesn't seem to be explicitly included from include/uapi/linux/in.h,
which breaks BPF selftests builds (once we sync linux/stddef.h into
tools/include directory in the next patch). Fix this by explicitly
including linux/stddef.h.
Given this affects BPF CI and bpf tree, targeting this for bpf tree.
Fixes: 5854a09b4957 ("net/ipv4: Use __DECLARE_FLEX_ARRAY() helper")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/bpf/20221102182517.2675301-1-andrii@kernel.org
|
|
Dexuan Cui says:
====================
vsock: remove an unused variable and fix infinite sleep
Patch 1 removes the unused 'wait' variable.
Patch 2 fixes an infinite sleep issue reported by a hv_sock user.
====================
Link: https://lore.kernel.org/r/20221101021706.26152-1-decui@microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently vsock_connectible_has_data() may miss a wakeup operation
between vsock_connectible_has_data() == 0 and the prepare_to_wait().
Fix the race by adding the process to the wait queue before checking
vsock_connectible_has_data().
Fixes: b3f7fd54881b ("af_vsock: separate wait data loop")
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reported-by: Frédéric Dalleau <frederic.dalleau@docker.com>
Tested-by: Frédéric Dalleau <frederic.dalleau@docker.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Remove the unused variable introduced by 19c1b90e1979.
Fixes: 19c1b90e1979 ("af_vsock: separate receive data loop")
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
xen_enable_sysenter() and xen_enable_syscall() can be simplified a lot.
While at it, switch to use cpu_feature_enabled() instead of
boot_cpu_has().
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Commit 8714f7bcd3c2 ("xen/pv: add fault recovery control to pmu msr
accesses") introduced code resulting in a warning issued by the smatch
static checker, claiming to use an uninitialized variable.
This is a false positive, but work around the warning nevertheless.
Fixes: 8714f7bcd3c2 ("xen/pv: add fault recovery control to pmu msr accesses")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Commit ae71ab585c81 ("drm/vc4: hdmi: Enforce the minimum rate at
runtime_resume") reintroduced the call to clk_set_min_rate in an attempt
to fix the boot without a monitor connected on the RaspberryPi3.
However, that introduced a regression breaking the display output
entirely (black screen but no vblank timeout) on the Pi4.
This is due to the fact that we now have in a typical modeset at boot,
in vc4_hdmi_encoder_pre_crtc_configure(), we have a first call to
clk_set_min_rate() asking for the minimum rate of the HSM clock for our
given resolution, and then a call to pm_runtime_resume_and_get(). We
will thus execute vc4_hdmi_runtime_resume() which, since the commit
mentioned above, will call clk_set_min_rate() a second time with the
absolute minimum rate we want to enforce on the HSM clock.
We're thus effectively erasing the minimum mandated by the mode we're
trying to set. The fact that only the Pi4 is affected is due to the fact
that it uses a different clock driver that tries to minimize the HSM
clock at all time. It will thus lower the HSM clock rate to 120MHz on
the second clk_set_min_rate() call.
The Pi3 doesn't use the same driver and will not change the frequency on
the second clk_set_min_rate() call since it's still within the new
boundaries and it doesn't have the code to minimize the clock rate as
needed. So even though the boundaries are still off, the clock rate is
still the right one for our given mode, so everything works.
There is a lot of moving parts, so I couldn't find any obvious
solution:
- Reverting the original is not an option, as that would break the Pi3
again.
- We can't move the clk_set_min_rate() call in _pre_crtc_configure()
since because, on the Pi3, the HSM clock has the CLK_SET_RATE_GATE
flag which prevents the clock rate from being changed after it's
been enabled. Our calls to clk_set_min_rate() can change it, so they
need to be done before clk_prepare_enable().
- We can't remove the call to clk_prepare_enable() from the
runtime_resume hook to put it into _pre_crtc_configure() either,
since we need that clock to be enabled to access the registers, and
we can't count on the fact that the display will be active in all
situations (doing any CEC operation, or listing the modes while
inactive are valid for example()).
- We can't drop the call to clk_set_min_rate() in
_pre_crtc_configure() since we would need to still enforce the
minimum rate for a given resolution, and runtime_resume doesn't have
access to the current mode, if there's any.
- We can't copy the TMDS character rate into vc4_hdmi and reuse it
since, because it's part of the KMS atomic state, it needs to be
protected by a mutex. Unfortunately, some functions (CEC operations,
mostly) can be reentrant (through the CEC framework) and still need
a pm_runtime_get.
However, we can work around this issue by leveraging the fact that the
clk_set_min_rate() calls set boundaries for its given struct clk, and
that each different clk_get() call will return a different instance of
struct clk. The clock framework will then aggregate the boundaries for
each struct clk instances linked to a given clock, plus its hardware
boundaries, and will use that.
We can thus get an extra HSM clock user for runtime_pm use only, and use
our different clock instances depending on the context: runtime_pm will
use its own to set the absolute minimum clock setup so that we never
lock the CPU waiting for a register access, and the modeset part will
set its requirement for the current resolution. And we let the CCF do
the coordination.
It's not an ideal solution, but it's fairly unintrusive and doesn't
really change any part of the logic so it looks like a rather safe fix.
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2136234
Fixes: ae71ab585c81 ("drm/vc4: hdmi: Enforce the minimum rate at runtime_resume")
Reported-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
Link: https://lore.kernel.org/r/20221021131339.2203291-1-maxime@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
|
A comment introduced by commit 6bed2ea3cb38 ("drm/vc4: hdmi: Reset link
on hotplug") mentions a drm_atomic_helper_connector_hdmi_reset_link()
function that was part of the earlier versions but got moved internally
and is now named vc4_hdmi_reset_link(). Let's fix the function name.
Fixes: 6bed2ea3cb38 ("drm/vc4: hdmi: Reset link on hotplug")
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20221024093634.118190-2-maxime@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
|
We access some fields protected by our internal mutex in
vc4_hdmi_reset_link() (saved_adjusted_mode, output_bpc, output_format)
and are calling functions that need to have that lock taken
(vc4_hdmi_supports_scrambling()).
However, the current code doesn't lock that mutex. Let's make sure it
does.
Fixes: 6bed2ea3cb38 ("drm/vc4: hdmi: Reset link on hotplug")
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20221024093634.118190-1-maxime@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
drm-misc-fixes for v6.1-rc4:
- Small fixes to make rockchip work better.
- Fix imx Kconfig.
- Small fix to imx' mode_valid.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/5476ef52-f91a-c2bc-f4b2-d338216d1e11@linux.intel.com
|
|
KASAN reported a use-after-free with ftrace ops [1]. It was found from
vmcore that perf had registered two ops with the same content
successively, both dynamic. After unregistering the second ops, a
use-after-free occurred.
In ftrace_shutdown(), when the second ops is unregistered, the
FTRACE_UPDATE_CALLS command is not set because there is another enabled
ops with the same content. Also, both ops are dynamic and the ftrace
callback function is ftrace_ops_list_func, so the
FTRACE_UPDATE_TRACE_FUNC command will not be set. Eventually the value
of 'command' will be 0 and ftrace_shutdown() will skip the rcu
synchronization.
However, ftrace may be activated. When the ops is released, another CPU
may be accessing the ops. Add the missing synchronization to fix this
problem.
[1]
BUG: KASAN: use-after-free in __ftrace_ops_list_func kernel/trace/ftrace.c:7020 [inline]
BUG: KASAN: use-after-free in ftrace_ops_list_func+0x2b0/0x31c kernel/trace/ftrace.c:7049
Read of size 8 at addr ffff56551965bbc8 by task syz-executor.2/14468
CPU: 1 PID: 14468 Comm: syz-executor.2 Not tainted 5.10.0 #7
Hardware name: linux,dummy-virt (DT)
Call trace:
dump_backtrace+0x0/0x40c arch/arm64/kernel/stacktrace.c:132
show_stack+0x30/0x40 arch/arm64/kernel/stacktrace.c:196
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x1b4/0x248 lib/dump_stack.c:118
print_address_description.constprop.0+0x28/0x48c mm/kasan/report.c:387
__kasan_report mm/kasan/report.c:547 [inline]
kasan_report+0x118/0x210 mm/kasan/report.c:564
check_memory_region_inline mm/kasan/generic.c:187 [inline]
__asan_load8+0x98/0xc0 mm/kasan/generic.c:253
__ftrace_ops_list_func kernel/trace/ftrace.c:7020 [inline]
ftrace_ops_list_func+0x2b0/0x31c kernel/trace/ftrace.c:7049
ftrace_graph_call+0x0/0x4
__might_sleep+0x8/0x100 include/linux/perf_event.h:1170
__might_fault mm/memory.c:5183 [inline]
__might_fault+0x58/0x70 mm/memory.c:5171
do_strncpy_from_user lib/strncpy_from_user.c:41 [inline]
strncpy_from_user+0x1f4/0x4b0 lib/strncpy_from_user.c:139
getname_flags+0xb0/0x31c fs/namei.c:149
getname+0x2c/0x40 fs/namei.c:209
[...]
Allocated by task 14445:
kasan_save_stack+0x24/0x50 mm/kasan/common.c:48
kasan_set_track mm/kasan/common.c:56 [inline]
__kasan_kmalloc mm/kasan/common.c:479 [inline]
__kasan_kmalloc.constprop.0+0x110/0x13c mm/kasan/common.c:449
kasan_kmalloc+0xc/0x14 mm/kasan/common.c:493
kmem_cache_alloc_trace+0x440/0x924 mm/slub.c:2950
kmalloc include/linux/slab.h:563 [inline]
kzalloc include/linux/slab.h:675 [inline]
perf_event_alloc.part.0+0xb4/0x1350 kernel/events/core.c:11230
perf_event_alloc kernel/events/core.c:11733 [inline]
__do_sys_perf_event_open kernel/events/core.c:11831 [inline]
__se_sys_perf_event_open+0x550/0x15f4 kernel/events/core.c:11723
__arm64_sys_perf_event_open+0x6c/0x80 kernel/events/core.c:11723
[...]
Freed by task 14445:
kasan_save_stack+0x24/0x50 mm/kasan/common.c:48
kasan_set_track+0x24/0x34 mm/kasan/common.c:56
kasan_set_free_info+0x20/0x40 mm/kasan/generic.c:358
__kasan_slab_free.part.0+0x11c/0x1b0 mm/kasan/common.c:437
__kasan_slab_free mm/kasan/common.c:445 [inline]
kasan_slab_free+0x2c/0x40 mm/kasan/common.c:446
slab_free_hook mm/slub.c:1569 [inline]
slab_free_freelist_hook mm/slub.c:1608 [inline]
slab_free mm/slub.c:3179 [inline]
kfree+0x12c/0xc10 mm/slub.c:4176
perf_event_alloc.part.0+0xa0c/0x1350 kernel/events/core.c:11434
perf_event_alloc kernel/events/core.c:11733 [inline]
__do_sys_perf_event_open kernel/events/core.c:11831 [inline]
__se_sys_perf_event_open+0x550/0x15f4 kernel/events/core.c:11723
[...]
Link: https://lore.kernel.org/linux-trace-kernel/20221103031010.166498-1-lihuafei1@huawei.com
Fixes: edb096e00724f ("ftrace: Fix memleak when unregistering dynamic ops when tracing disabled")
Cc: stable@vger.kernel.org
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Li Huafei <lihuafei1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
On some machines the number of listed CPUs may be bigger than the actual
CPUs that exist. The tracing subsystem allocates a per_cpu directory with
access to the per CPU ring buffer via a cpuX file. But to save space, the
ring buffer will only allocate buffers for online CPUs, even though the
CPU array will be as big as the nr_cpu_ids.
With the addition of waking waiters on the ring buffer when closing the
file, the ring_buffer_wake_waiters() now needs to make sure that the
buffer is allocated (with the irq_work allocated with it) before trying to
wake waiters, as it will cause a NULL pointer dereference.
While debugging this, I added a NULL check for the buffer itself (which is
OK to do), and also NULL pointer checks against buffer->buffers (which is
not fine, and will WARN) as well as making sure the CPU number passed in
is within the nr_cpu_ids (which is also not fine if it isn't).
Link: https://lore.kernel.org/all/87h6zklb6n.wl-tiwai@suse.de/
Link: https://lore.kernel.org/all/CAM6Wdxc0KRJMXVAA0Y=u6Jh2V=uWB-_Fn6M4xRuNppfXzL1mUg@mail.gmail.com/
Link: https://lkml.kernel.org/linux-trace-kernel/20221101191009.1e7378c8@rorschach.local.home
Cc: stable@vger.kernel.org
Cc: Steven Noonan <steven.noonan@gmail.com>
Bugzilla: https://bugzilla.opensuse.org/show_bug.cgi?id=1204705
Reported-by: Takashi Iwai <tiwai@suse.de>
Reported-by: Roland Ruckerbauer <roland.rucky@gmail.com>
Fixes: f3ddb74ad079 ("tracing: Wake up ring buffer waiters on closing of the file")
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
During the initialization of ip6_route_net_init_late(), if file
ipv6_route or rt6_stats fails to be created, the initialization is
successful by default. Therefore, the ipv6_route or rt6_stats file
doesn't be found during the remove in ip6_route_net_exit_late(). It
will cause WRNING.
The following is the stack information:
name 'rt6_stats'
WARNING: CPU: 0 PID: 9 at fs/proc/generic.c:712 remove_proc_entry+0x389/0x460
Modules linked in:
Workqueue: netns cleanup_net
RIP: 0010:remove_proc_entry+0x389/0x460
PKRU: 55555554
Call Trace:
<TASK>
ops_exit_list+0xb0/0x170
cleanup_net+0x4ea/0xb00
process_one_work+0x9bf/0x1710
worker_thread+0x665/0x1080
kthread+0x2e4/0x3a0
ret_from_fork+0x1f/0x30
</TASK>
Fixes: cdb1876192db ("[NETNS][IPV6] route6 - create route6 proc files for the namespace")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20221102020610.351330-1-shaozhengchao@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The following commands should result in all the dynamic FDB entries
being flushed, but instead all the non-local (non-permanent) entries are
flushed:
# bridge fdb add 00:aa:bb:cc:dd:ee dev dummy1 master static
# bridge fdb add 00:11:22:33:44:55 dev dummy1 master dynamic
# ip link set dev br0 type bridge fdb_flush
# bridge fdb show brport dummy1
00:00:00:00:00:01 master br0 permanent
33:33:00:00:00:01 self permanent
01:00:5e:00:00:01 self permanent
This is because br_fdb_flush() works with FDB flags and not the
corresponding enumerator values. Fix by passing the FDB flag instead.
After the fix:
# bridge fdb add 00:aa:bb:cc:dd:ee dev dummy1 master static
# bridge fdb add 00:11:22:33:44:55 dev dummy1 master dynamic
# ip link set dev br0 type bridge fdb_flush
# bridge fdb show brport dummy1
00:aa:bb:cc:dd:ee master br0 static
00:00:00:00:00:01 master br0 permanent
33:33:00:00:00:01 self permanent
01:00:5e:00:00:01 self permanent
Fixes: 1f78ee14eeac ("net: bridge: fdb: add support for fine-grained flushing")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20221101185753.2120691-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When IPv6 module gets initialized but hits an error in the middle,
kenel panic with:
KASAN: null-ptr-deref in range [0x0000000000000598-0x000000000000059f]
CPU: 1 PID: 361 Comm: insmod
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
RIP: 0010:__neigh_ifdown.isra.0+0x24b/0x370
RSP: 0018:ffff888012677908 EFLAGS: 00000202
...
Call Trace:
<TASK>
neigh_table_clear+0x94/0x2d0
ndisc_cleanup+0x27/0x40 [ipv6]
inet6_init+0x21c/0x2cb [ipv6]
do_one_initcall+0xd3/0x4d0
do_init_module+0x1ae/0x670
...
Kernel panic - not syncing: Fatal exception
When ipv6 initialization fails, it will try to cleanup and calls:
neigh_table_clear()
neigh_ifdown(tbl, NULL)
pneigh_queue_purge(&tbl->proxy_queue, dev_net(dev == NULL))
# dev_net(NULL) triggers null-ptr-deref.
Fix it by passing NULL to pneigh_queue_purge() in neigh_ifdown() if dev
is NULL, to make kernel not panic immediately.
Fixes: 66ba215cb513 ("neigh: fix possible DoS due to net iface start/stop loop")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Link: https://lore.kernel.org/r/20221101121552.21890-1-chenzhongjin@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In smc_init(), register_pernet_subsys(&smc_net_stat_ops) is called
without any error handling.
If it fails, registering of &smc_net_ops won't be reverted.
And if smc_nl_init() fails, &smc_net_stat_ops itself won't be reverted.
This leaves wild ops in subsystem linkedlist and when another module
tries to call register_pernet_operations() it triggers page fault:
BUG: unable to handle page fault for address: fffffbfff81b964c
RIP: 0010:register_pernet_operations+0x1b9/0x5f0
Call Trace:
<TASK>
register_pernet_subsys+0x29/0x40
ebtables_init+0x58/0x1000 [ebtables]
...
Fixes: 194730a9beb5 ("net/smc: Make SMC statistics network namespace aware")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Link: https://lore.kernel.org/r/20221101093722.127223-1-chenzhongjin@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In current code "plat->mdio_node" is always NULL, the mdio
support is lost as there is no "mdio_bus_data". The original
driver could work as the "mdio" variable is never set to
false, which is described in commit <b0e03950dd71> ("stmmac:
dwmac-loongson: fix uninitialized variable ......"). And
after this commit merged, the "mdio" variable is always
false, causing the mdio supoort logic lost.
Fixes: 30bba69d7db4 ("stmmac: pci: Add dwmac support for Loongson")
Signed-off-by: Liu Peibao <liupeibao@loongson.cn>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20221101060218.16453-1-liupeibao@loongson.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Free the rwi structure in the event that the last rwi in the list
processed successfully. The logic in commit 4f408e1fa6e1 ("ibmvnic:
retry reset if there are no other resets") introduces an issue that
results in a 32 byte memory leak whenever the last rwi in the list
gets processed.
Fixes: 4f408e1fa6e1 ("ibmvnic: retry reset if there are no other resets")
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Link: https://lore.kernel.org/r/20221031150642.13356-1-nnac123@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Shifting signed 32-bit value by 31 bits is undefined, so changing
significant bit to unsigned. The UBSAN warning calltrace like below:
UBSAN: shift-out-of-bounds in drivers/net/phy/mdio_bus.c:586:27
left shift of 1 by 31 places cannot be represented in type 'int'
Call Trace:
<TASK>
dump_stack_lvl+0x7d/0xa5
dump_stack+0x15/0x1b
ubsan_epilogue+0xe/0x4e
__ubsan_handle_shift_out_of_bounds+0x1e7/0x20c
__mdiobus_register+0x49d/0x4e0
fixed_mdio_bus_init+0xd8/0x12d
do_one_initcall+0x76/0x430
kernel_init_freeable+0x3b3/0x422
kernel_init+0x24/0x1e0
ret_from_fork+0x1f/0x30
</TASK>
Fixes: 4fd5f812c23c ("phylib: allow incremental scanning of an mii bus")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20221031132645.168421-1-cuigaosheng1@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The function gsm_dlci_t1() is a timer handler that runs in an
atomic context, but it calls "kzalloc(..., GFP_KERNEL)" that
may sleep. As a result, the sleep-in-atomic-context bug will
happen. The process is shown below:
gsm_dlci_t1()
gsm_dlci_open()
gsm_modem_update()
gsm_modem_upd_via_msc()
gsm_control_send()
kzalloc(sizeof(.., GFP_KERNEL) //may sleep
This patch changes the gfp_t parameter of kzalloc() from GFP_KERNEL to
GFP_ATOMIC in order to mitigate the bug.
Fixes: e1eaea46bb40 ("tty: n_gsm line discipline")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://lore.kernel.org/r/20221002040709.27849-1-duoming@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit c9ab053e56ce13a949977398c8edc12e6c02fc95.
The above commit is reverted as it was a prerequisite for tx_mutex
introduction and tx_mutex has been removed as it does not correctly
work in order to protect tx data.
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Reviewed-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20221008110221.13645-3-pchelkin@ispras.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit 902e02ea9385373ce4b142576eef41c642703955.
The above commit is reverted as the usage of tx_mutex seems not to solve
the problem described in 902e02ea9385 ("tty: n_gsm: avoid call of sleeping
functions from atomic context") and just moves the bug to another place.
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Reviewed-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20221008110221.13645-2-pchelkin@ispras.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The following warning is seen with non-console UART instance when
system hibernates.
[ 37.371969] ------------[ cut here ]------------
[ 37.376599] uart3_root_clk already disabled
[ 37.380810] WARNING: CPU: 0 PID: 296 at drivers/clk/clk.c:952 clk_core_disable+0xa4/0xb0
...
[ 37.506986] Call trace:
[ 37.509432] clk_core_disable+0xa4/0xb0
[ 37.513270] clk_disable+0x34/0x50
[ 37.516672] imx_uart_thaw+0x38/0x5c
[ 37.520250] platform_pm_thaw+0x30/0x6c
[ 37.524089] dpm_run_callback.constprop.0+0x3c/0xd4
[ 37.528972] device_resume+0x7c/0x160
[ 37.532633] dpm_resume+0xe8/0x230
[ 37.536036] hibernation_snapshot+0x288/0x430
[ 37.540397] hibernate+0x10c/0x2e0
[ 37.543798] state_store+0xc4/0xd0
[ 37.547203] kobj_attr_store+0x1c/0x30
[ 37.550953] sysfs_kf_write+0x48/0x60
[ 37.554619] kernfs_fop_write_iter+0x118/0x1ac
[ 37.559063] new_sync_write+0xe8/0x184
[ 37.562812] vfs_write+0x230/0x290
[ 37.566214] ksys_write+0x68/0xf4
[ 37.569529] __arm64_sys_write+0x20/0x2c
[ 37.573452] invoke_syscall.constprop.0+0x50/0xf0
[ 37.578156] do_el0_svc+0x11c/0x150
[ 37.581648] el0_svc+0x30/0x140
[ 37.584792] el0t_64_sync_handler+0xe8/0xf0
[ 37.588976] el0t_64_sync+0x1a0/0x1a4
[ 37.592639] ---[ end trace 56e22eec54676d75 ]---
On hibernating, pm core calls into related hooks in sequence like:
.freeze
.freeze_noirq
.thaw_noirq
.thaw
With .thaw_noirq hook being absent, the clock will be disabled in a
unbalanced call which results the warning above.
imx_uart_freeze()
clk_prepare_enable()
imx_uart_suspend_noirq()
clk_disable()
imx_uart_thaw
clk_disable_unprepare()
Adding the missing .thaw_noirq hook as imx_uart_resume_noirq() will have
the call sequence corrected as below and thus fix the warning.
imx_uart_freeze()
clk_prepare_enable()
imx_uart_suspend_noirq()
clk_disable()
imx_uart_resume_noirq()
clk_enable()
imx_uart_thaw
clk_disable_unprepare()
Fixes: 09df0b3464e5 ("serial: imx: fix endless loop during suspend")
Reviewed-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Link: https://lore.kernel.org/r/20221012121353.2346280-1-shawn.guo@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
lpuart_global_reset() shouldn't break the on-going transmit engine, need
to recover the on-going data transfer after reset.
This can help earlycon here, since commit 60f361722ad2 ("serial:
fsl_lpuart: Reset prior to registration") moved lpuart_global_reset()
before uart_add_one_port(), earlycon is writing during global reset,
as global reset will disable the TX and clear the baud rate register,
which caused the earlycon cannot work any more after reset, needs to
restore the baud rate and re-enable the transmitter to recover the
earlycon write.
Also move the lpuart_global_reset() down, then we can reuse the
lpuart32_tx_empty() without declaration.
Fixes: bd5305dcabbc ("tty: serial: fsl_lpuart: do software reset for imx7ulp and imx8qxp")
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Link: https://lore.kernel.org/r/20221024085844.22786-1-sherry.sun@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Pablo Neira Ayuso says:
====================
Netfilter/IPVS fixes for net
1) netlink socket notifier might win race to release objects that are
already pending to be released via commit release path, reported by
syzbot.
2) No need to postpone flow rule release to commit release path, this
triggered the syzbot report, complementary fix to previous patch.
3) Use explicit signed chars in IPVS to unbreak arm, from Jason A. Donenfeld.
4) Missing check for proc entry creation failure in IPVS, from Zhengchao Shao.
5) Incorrect error path handling when BPF NAT fails to register, from
Chen Zhongjin.
6) Prevent huge memory allocation in ipset hash types, from Jozsef Kadlecsik.
Except the incorrect BPF NAT error path which is broken in 6.1-rc, anything
else has been broken for several releases.
* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: ipset: enforce documented limit to prevent allocating huge memory
netfilter: nf_nat: Fix possible memory leak in nf_nat_init()
ipvs: fix WARNING in ip_vs_app_net_cleanup()
ipvs: fix WARNING in __ip_vs_cleanup_batch()
ipvs: use explicitly signed chars
netfilter: nf_tables: release flow rule object from commit path
netfilter: nf_tables: netlink notifier might race to release objects
====================
Link: https://lore.kernel.org/r/20221102184659.2502-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Rebinding 8250_omap in a loop will at some point produce a warning for
kernel/power/qos.c:296 cpu_latency_qos_update_request() with error
"cpu_latency_qos_update_request called for unknown object". Let's flush
the possibly pending PM QOS work scheduled from omap8250_runtime_suspend()
before we disable runtime PM.
Fixes: 61929cf0169d ("tty: serial: Add 8250-core based omap driver")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20221028110044.54719-1-tony@atomide.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
On remove, we get an error for "Runtime PM usage count underflow!". I guess
this driver is mostly built-in, and this issue has gone unnoticed for a
while. Somehow I did not catch this issue with my earlier fix done with
commit 4e0f5cc65098 ("serial: 8250_omap: Fix probe and remove for PM
runtime").
Fixes: 4e0f5cc65098 ("serial: 8250_omap: Fix probe and remove for PM runtime")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Depends-on: dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
Link: https://lore.kernel.org/r/20221028105813.54290-1-tony@atomide.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We were occasionally seeing the "Errata i202: timedout" on an AM335x
board when repeatedly opening and closing a UART connected to an active
sender. As new input may arrive at any time, it is possible to miss the
"RX FIFO empty" condition, forcing the loop to wait until it times out.
Nothing in the i202 Advisory states that such a wait is even necessary;
other FIFO clear functions like serial8250_clear_fifos() do not wait
either. For this reason, it seems safe to remove the wait, fixing the
mentioned issue.
Fixes: 61929cf0169d ("tty: serial: Add 8250-core based omap driver")
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Link: https://lore.kernel.org/r/20221013112339.2540767-1-matthias.schiffer@ew.tq-group.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There are cases where omap8250_set_mctrl() may get called after the
UART has already autoidled causing an asynchronous external abort.
This can happen on ttyport_open():
mem_serial_in from omap8250_set_mctrl+0x38/0xa0
omap8250_set_mctrl from uart_update_mctrl+0x4c/0x58
uart_update_mctrl from uart_dtr_rts+0x60/0xa8
uart_dtr_rts from tty_port_block_til_ready+0xd0/0x2a8
tty_port_block_til_ready from uart_open+0x14/0x1c
uart_open from ttyport_open+0x64/0x148
And on ttyport_close():
omap8250_set_mctrl from uart_update_mctrl+0x3c/0x48
uart_update_mctrl from uart_dtr_rts+0x54/0x9c
uart_dtr_rts from tty_port_shutdown+0x78/0x9c
tty_port_shutdown from tty_port_close+0x3c/0x74
tty_port_close from ttyport_close+0x40/0x58
It can also happen on disassociate_ctty() calling uart_shutdown()
that ends up calling omap8250_set_mctrl().
Let's fix the issue by adding missing PM runtime calls to
omap8250_set_mctrl(). To do this, we need to add __omap8250_set_mctrl()
that can be called from both omap8250_set_mctrl(), and from runtime PM
resume path when restoring the registers.
Fixes: 61929cf0169d ("tty: serial: Add 8250-core based omap driver")
Reported-by: Merlijn Wajer <merlijn@wizzup.org>
Reported-by: Romain Naour <romain.naour@smile.fr>
Reported-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Tested-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Depends-on: dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
Link: https://lore.kernel.org/r/20221024063613.25943-1-tony@atomide.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
RS485-enabled UART ports on TI Sitara SoCs with active-low polarity
exhibit a Transmit Enable glitch on ->set_termios():
omap8250_restore_regs(), which is called from omap_8250_set_termios(),
sets the TCRTLR bit in the MCR register and clears all other bits,
including RTS. If RTS uses active-low polarity, it is now asserted
for no reason.
The TCRTLR bit is subsequently cleared by writing up->mcr to the MCR
register. That variable is always zero, so the RTS bit is still cleared
(incorrectly so if RTS is active-high).
(up->mcr is not, as one might think, a cache of the MCR register's
current value. Rather, it only caches a single bit of that register,
the AFE bit. And it only does so if the UART supports the AFE bit,
which OMAP does not. For details see serial8250_do_set_termios() and
serial8250_do_set_mctrl().)
Finally at the end of omap8250_restore_regs(), the MCR register is
restored (and RTS deasserted) by a call to up->port.ops->set_mctrl()
(which equals serial8250_set_mctrl()) and serial8250_em485_stop_tx().
So there's an RTS glitch between setting TCRTLR and calling
serial8250_em485_stop_tx(). Avoid by using a read-modify-write
when setting TCRTLR.
While at it, drop a redundant initialization of up->mcr. As explained
above, the variable isn't used by the driver and it is already
initialized to zero because it is part of the static struct
serial8250_ports[] declared in 8250_core.c. (Static structs are
initialized to zero per section 6.7.8 nr. 10 of the C99 standard.)
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Su Bao Cheng <baocheng.su@siemens.com>
Tested-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Link: https://lore.kernel.org/r/6554b0241a2c7fd50f32576fdbafed96709e11e8.1664278942.git.lukas@wunner.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth 2022-11-02
- Fix memory leak in hci_vhci driver
- Fix handling of skb on virtio_bt driver
- Fix accepting connection for invalid L2CAP PSM
- Fix attemting to access uninitialized memory
- Fix use-after-free in l2cap_reassemble_sdu
- Fix use-after-free in l2cap_conn_del
- Fix handling of destination address type for CIS
- Fix not restoring ISO buffer count on disconnect
* tag 'for-net-2022-10-02' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: L2CAP: Fix attempting to access uninitialized memory
Bluetooth: L2CAP: Fix l2cap_global_chan_by_psm
Bluetooth: L2CAP: Fix accepting connection request for invalid SPSM
Bluetooth: hci_conn: Fix not restoring ISO buffer count on disconnect
Bluetooth: L2CAP: Fix memory leak in vhci_write
Bluetooth: L2CAP: fix use-after-free in l2cap_conn_del()
Bluetooth: virtio_bt: Use skb_put to set length
Bluetooth: hci_conn: Fix CIS connection dst_type handling
Bluetooth: L2CAP: Fix use-after-free caused by l2cap_reassemble_sdu
====================
Link: https://lore.kernel.org/r/20221102235927.3324891-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
On l2cap_parse_conf_req the variable efs is only initialized if
remote_efs has been set.
CVE: CVE-2022-42895
CC: stable@vger.kernel.org
Reported-by: Tamás Koczka <poprdi@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Reviewed-by: Tedd Ho-Jeong An <tedd.an@intel.com>
|
|
l2cap_global_chan_by_psm shall not return fixed channels as they are not
meant to be connected by (S)PSM.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Reviewed-by: Tedd Ho-Jeong An <tedd.an@intel.com>
|
|
The Bluetooth spec states that the valid range for SPSM is from
0x0001-0x00ff so it is invalid to accept values outside of this range:
BLUETOOTH CORE SPECIFICATION Version 5.3 | Vol 3, Part A
page 1059:
Table 4.15: L2CAP_LE_CREDIT_BASED_CONNECTION_REQ SPSM ranges
CVE: CVE-2022-42896
CC: stable@vger.kernel.org
Reported-by: Tamás Koczka <poprdi@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Reviewed-by: Tedd Ho-Jeong An <tedd.an@intel.com>
|
|
With corresponding FW change fixes issue where triggering CWSR on a
workgroup with waves in s_barrier wouldn't lead to a back-off and
therefore cause a hang.
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Tested-by: Graham Sider <Graham.Sider@amd.com>
Acked-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Graham Sider <Graham.Sider@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.0.x
|
|
[Why]
Fix for some of the tool reported modes for FCLK
P-state deviations and UCLK P-state deviations that
are coming from DSC terms and/or Scaling terms
causing MinActiveFCLKChangeLatencySupported
and MaxActiveDRAMClockChangeLatencySupported
incorrectly calculated in DML for these configurations.
Reviewed-by: Chaitanya Dhere <Chaitanya.Dhere@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Certain 4K high refresh rate modes requiring DSC are exhibiting top
of screen underflow corruption. Increasing the DSC delay by a factor
of 6 percent stops the underflow for most use cases.
[How]
Multiply DSC delay requirement in DML by a factor.
Add debug option to make this DSC delay factor configurable.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
The DST_after_scaler value that DML spreadsheet outputs is
generally the driver value round up to the nearest int.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
