| Age | Commit message (Collapse) | Author |
|---|
|
Replace the header string "Lcl" with "LclHit", which is more explicit
to express the event type is LLC local hit.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Joe Mario <jmario@redhat.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20201014050921.5591-7-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Local and remote HITM use the headers 'Lcl' and 'Rmt' respectively,
suppose if we want to extend the tool to display these two dimensions
under any one metrics, users cannot understand the semantics if only
based on the header string 'Lcl' or 'Rmt'.
To explicit express the meaning for HITM items, this patch changes the
headers string as "LclHitm" and "RmtHitm", the strings are more readable
and this allows to extend metrics for using HITM items.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Joe Mario <jmario@redhat.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20201014050921.5591-6-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The metrics "LLC Load Hitm" contains two items: one is "local Hitm" and
another is "remote Hitm".
"local Hitm" means: L3 HIT and was serviced by another processor core
with a cross core snoop where modified copies were found; it's no doubt
that "local Hitm" belongs to LLC access.
But for "remote Hitm", based on the code in util/mem-events, it's the
event for remote cache HIT and was serviced by another processor core
with modified copies. Thus the remote Hitm is a remote cache's hit and
actually it's LLC load miss.
Now the display format gives users the impression that "local Hitm" and
"remote Hitm" both belong to the LLC load, but this is not the fact as
described.
This patch changes the header from "LLC Load Hitm" to "Load Hitm", this
can avoid the give the wrong impression that all Hitm belong to LLC.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Joe Mario <jmario@redhat.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20201014050921.5591-5-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The metrics are not organized based on memory hierarchy, e.g. the tool
doesn't organize the metrics order based on memory nodes from the close
node (e.g. L1/L2 cache) to far node (e.g. L3 cache and DRAM).
To output metrics with more friendly form, this patch refines the
metrics order based on memory hierarchy:
"Core Load Hit" => "LLC Load Hit" => "LLC Ld Miss" => "Load Dram"
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Joe Mario <jmario@redhat.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20201014050921.5591-4-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The total stores is displayed under the metrics "Store Reference", to
output the same format with total records and all loads, extract the
total stores number as a standalone metrics "Total Stores".
After this patch, the tool shows the summary numbers ("Total records",
"Total loads", "Total Stores") in the unified form.
Before:
# ----------- Cacheline ---------- Tot ----- LLC Load Hitm ----- Total Total ---- Store Reference ---- --- Load Dram ---- LLC ----- Core Load Hit ----- -- LLC Load Hit --
# Index Address Node PA cnt Hitm Total Lcl Rmt records Loads Total L1Hit L1Miss Lcl Rmt Ld Miss FB L1 L2 Llc Rmt
# ..... .................. .... ...... ....... ....... ....... ....... ....... ....... ....... ....... ....... ........ ........ ....... ....... ....... ....... ........ ........
#
0 0x55f07d580100 0 1499 85.89% 481 481 0 7243 3879 3364 2599 765 0 0 0 548 2615 66 169 0
1 0x55f07d580080 0 1 13.93% 78 78 0 664 664 0 0 0 0 0 0 187 361 27 11 0
2 0x55f07d5800c0 0 1 0.18% 1 1 0 405 405 0 0 0 0 0 0 131 0 10 263 0
After:
# ----------- Cacheline ---------- Tot ----- LLC Load Hitm ----- Total Total Total ---- Stores ---- --- Load Dram ---- LLC ----- Core Load Hit ----- -- LLC Load Hit --
# Index Address Node PA cnt Hitm Total Lcl Rmt records Loads Stores L1Hit L1Miss Lcl Rmt Ld Miss FB L1 L2 Llc Rmt
# ..... .................. .... ...... ....... ....... ....... ....... ....... ....... ....... ....... ....... ........ ........ ....... ....... ....... ....... ........ ........
#
0 0x55f07d580100 0 1499 85.89% 481 481 0 7243 3879 3364 2599 765 0 0 0 548 2615 66 169 0
1 0x55f07d580080 0 1 13.93% 78 78 0 664 664 0 0 0 0 0 0 187 361 27 11 0
2 0x55f07d5800c0 0 1 0.18% 1 1 0 405 405 0 0 0 0 0 0 131 0 10 263 0
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Joe Mario <jmario@redhat.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20201014050921.5591-3-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To view the statistics with "breakdown" mode, it's good to show the
summary numbers for the total records, all stores and all loads, then
the sequential conlumns can be used to break into more detailed items.
To achieve this purpose, this patch displays the summary numbers for
records/stores/loads continuously and places them before breakdown
items, this can allow uses to easily read the summarized statistics.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Joe Mario <jmario@redhat.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20201014050921.5591-2-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When flushing out its ail1 list, gfs2_write_jdata_page calls function
__block_write_full_page passing in function gfs2_get_block_noalloc.
But there was a problem when a process wrote to a jdata file, then
truncated it or punched a hole, leaving references to the blocks within
the new hole in its ail list, which are to be written to the journal log.
In writing them to the journal, after calling gfs2_block_map, function
gfs2_get_block_noalloc determined that the (hole-punched) block was not
mapped, so it returned -EIO to generic_writepages, which passed it back
to gfs2_ail1_start_one. This, in turn, performed a withdraw, assuming
there was a real IO error writing to the journal.
This might be a valid error when writing metadata to the journal, but for
journaled data writes, it does not warrant a withdraw.
This patch adds a check to function gfs2_block_map that makes an exception
for journaled data writes that correspond to jdata holes: If the iomap
get function returns a block type of IOMAP_HOLE, it instead returns
-ENODATA which does not cause the withdraw. Other errors are returned as
before.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Function gfs2_block_map had a lot of redundancy between its create and
no_create paths. This patch simplifies the code to eliminate the redundancy.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
With jdata writes, we frequently got into situations where gfs2 deadlocked
because of this calling sequence:
gfs2_ail1_start
gfs2_ail1_flush - for every tr on the sd_ail1_list:
gfs2_ail1_start_one - for every bd on the tr's tr_ail1_list:
generic_writepages
write_cache_pages passing __writepage()
calls clear_page_dirty_for_io which calls set_page_dirty:
which calls jdata_set_page_dirty which sets PageChecked.
__writepage() calls
mapping->a_ops->writepage AKA gfs2_jdata_writepage
However, gfs2_jdata_writepage checks if PageChecked is set, and if so, it
ignores the write and redirties the page. The problem is that write_cache_pages
calls clear_page_dirty_for_io, which often calls set_page_dirty(). See comments
in page-writeback.c starting with "Yes, Virginia". If it's jdata,
set_page_dirty will call jdata_set_page_dirty which will set PageChecked.
That causes a conflict because it makes it look like the page has been
redirtied by another writer, in which case we need to skip writing it and
redirty the page. That ends up in a deadlock because it isn't a "real" writer
and nothing will ever clear PageChecked.
If we do have a real writer, it will have started a transaction. So this
patch checks if a transaction is in use, and if not, it skips setting
PageChecked. That way, the page will be dirtied, cleaned, and written
appropriately.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Patch 380f7c65a7eb3288e4b6812acf3474a1de230707 changed gfs2_releasepage
so that it held the sd_ail_lock spin_lock for most of its processing.
It did this for some mysterious undocumented bug somewhere in the
evict code path. But in the nine years since, evict has been reworked
and fixed many times, and so have the transactions and ail list.
I can't see a reason to hold the sd_ail_lock unless it's protecting
the actual ail lists hung off the transactions. Therefore, this patch
removes the locking to increase speed and efficiency, and to further help
us rework the log flush code to be more concurrent with transactions.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
This patch is one baby step toward simplifying the journal management.
It simply changes function gfs2_ail1_empty_one from a void to an int and
makes it return a count of active items. This allows the caller to check
the return code rather than list_empty on the tr_ail1_list. This way
we can, in a later patch, combine transaction ail1 and ail2 lists.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Before this patch, when blocks were freed, it called gfs2_meta_wipe to
take the metadata out of the pending journal blocks. It did this mostly
by calling another function called gfs2_remove_from_journal. This is
shortsighted because it does not do anything with jdata blocks which
may also be in the journal.
This patch expands the function so that it wipes out jdata blocks from
the journal as well, and it wipes it from the ail1 list if it hasn't
been written back yet. Since it now processes jdata blocks as well,
the function has been renamed from gfs2_meta_wipe to gfs2_journal_wipe.
New function gfs2_ail1_wipe wants a static view of the ail list, so it
locks the sd_ail_lock when removing items. To accomplish this, function
gfs2_remove_from_journal no longer locks the sd_ail_lock, and it's now
the caller's responsibility to do so.
I was going to make sd_ail_lock locking conditional, but the practice is
generally frowned upon. For details, see: https://lwn.net/Articles/109066/
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
This patch adds some code to enhance the log_blocks trace point. It
reports the number of free log blocks. This makes the trace point much
more useful, especially for debugging performance problems when we can
tell when the journal gets full and needs to wait for flushes, etc.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Function gfs2_write_revokes was incrementing and decrementing the number
of log blocks free, but there was never a log_blocks trace point for it.
Thus, the free blocks from a log_blocks trace would jump around
mysteriously.
This patch adds the missing trace points so the trace makes more sense.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Since the function is only used for writing jdata pages, this patch
simply renames function gfs2_write_full_page to a more appropriate
name: gfs2_write_jdata_page. This makes the code easier to understand.
The function was only called in one place, which passed in a pointer to
function gfs2_get_block_noalloc. The function doesn't need to be
passed in. Therefore, this also eliminates the unnecessary parameter
to increase efficiency.
I also took the liberty of cleaning up the function comments.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
In gfs2_check_sb(), no validation checks are performed with regards to
the size of the superblock.
syzkaller detected a slab-out-of-bounds bug that was primarily caused
because the block size for a superblock was set to zero.
A valid size for a superblock is a power of 2 between 512 and PAGE_SIZE.
Performing validation checks and ensuring that the size of the superblock
is valid fixes this bug.
Reported-by: syzbot+af90d47a37376844e731@syzkaller.appspotmail.com
Tested-by: syzbot+af90d47a37376844e731@syzkaller.appspotmail.com
Suggested-by: Andrew Price <anprice@redhat.com>
Signed-off-by: Anant Thazhemadam <anant.thazhemadam@gmail.com>
[Minor code reordering.]
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Fix the loss of transmission of a call's final ack when a socket gets shut
down. This means that the server will retransmit the last data packet or
send a ping ack and then get an ICMP indicating the port got closed. The
server will then view this as a failure.
Fixes: 3136ef49a14c ("rxrpc: Delay terminal ACK transmission on a client call")
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Fix rxrpc_unbundle_conn() to not drop the bundle usage count when cleaning
up an exclusive connection.
Based on the suggested fix from Hillf Danton.
Fixes: 245500d853e9 ("rxrpc: Rewrite the client connection manager")
Reported-by: syzbot+d57aaf84dd8a550e6d91@syzkaller.appspotmail.com
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Hillf Danton <hdanton@sina.com>
|
|
HAVE_MOVE_PMD enables remapping pages at the PMD level if both the
source and destination addresses are PMD-aligned.
HAVE_MOVE_PMD is already enabled on x86. The original patch [1] that
introduced this config did not enable it on arm64 at the time because
of performance issues with flushing the TLB on every PMD move. These
issues have since been addressed in more recent releases with
improvements to the arm64 TLB invalidation and core mmu_gather code as
Will Deacon mentioned in [2].
>From the data below, it can be inferred that there is approximately
8x improvement in performance when HAVE_MOVE_PMD is enabled on arm64.
--------- Test Results ----------
The following results were obtained on an arm64 device running a 5.4
kernel, by remapping a PMD-aligned, 1GB sized region to a PMD-aligned
destination. The results from 10 iterations of the test are given below.
All times are in nanoseconds.
Control HAVE_MOVE_PMD
9220833 1247761
9002552 1219896
9254115 1094792
8725885 1227760
9308646 1043698
9001667 1101771
8793385 1159896
8774636 1143594
9553125 1025833
9374010 1078125
9100885.4 1134312.6 <-- Mean Time in nanoseconds
Total mremap time for a 1GB sized PMD-aligned region drops from
~9.1 milliseconds to ~1.1 milliseconds. (~8x speedup).
[1] https://lore.kernel.org/r/20181108181201.88826-3-joelaf@google.com
[2] https://www.mail-archive.com/linuxppc-dev@lists.ozlabs.org/msg140837.html
Signed-off-by: Kalesh Singh <kaleshsingh@google.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/r/20201014005320.2233162-3-kaleshsingh@google.com
Link: https://lore.kernel.org/kvmarm/20181029102840.GC13965@arm.com/
Signed-off-by: Will Deacon <will@kernel.org>
|
|
data_realloc() returns wrong data pointer when the block is wrapped and
the size is not increased. It might happen when pr_cont() wants to
add only few characters and there is already a space for them because
of alignment.
It might cause writing outsite the buffer. It has been detected by LTP
tests with KASAN enabled:
[ 221.921944] oom-kill:constraint=CONSTRAINT_MEMCG,nodemask=(null),cpuset=c,mems_allowed=0,oom_memcg=/0,task_memcg=in
[ 221.922108] ==================================================================
[ 221.922111] BUG: KASAN: global-out-of-bounds in vprintk_store+0x362/0x3d0
[ 221.922112] Write of size 2 at addr ffffffffba51dbcd by task
memcg_test_1/11282
[ 221.922113]
[ 221.922114] CPU: 1 PID: 11282 Comm: memcg_test_1 Not tainted
5.9.0-next-20201013 #1
[ 221.922116] Hardware name: Supermicro SYS-5019S-ML/X11SSH-F, BIOS
2.0b 07/27/2017
[ 221.922116] Call Trace:
[ 221.922117] dump_stack+0xa4/0xd9
[ 221.922118] print_address_description.constprop.0+0x21/0x210
[ 221.922119] ? _raw_write_lock_bh+0xe0/0xe0
[ 221.922120] ? vprintk_store+0x362/0x3d0
[ 221.922121] kasan_report.cold+0x37/0x7c
[ 221.922122] ? vprintk_store+0x362/0x3d0
[ 221.922123] check_memory_region+0x18c/0x1f0
[ 221.922124] memcpy+0x3c/0x60
[ 221.922125] vprintk_store+0x362/0x3d0
[ 221.922125] ? __ia32_sys_syslog+0x50/0x50
[ 221.922126] ? _raw_spin_lock_irqsave+0x9b/0x100
[ 221.922127] ? _raw_spin_lock_irq+0xf0/0xf0
[ 221.922128] ? __kasan_check_write+0x14/0x20
[ 221.922129] vprintk_emit+0x8d/0x1f0
[ 221.922130] vprintk_default+0x1d/0x20
[ 221.922131] vprintk_func+0x5a/0x100
[ 221.922132] printk+0xb2/0xe3
[ 221.922133] ? swsusp_write.cold+0x189/0x189
[ 221.922134] ? kernfs_vfs_xattr_set+0x60/0x60
[ 221.922134] ? _raw_write_lock_bh+0xe0/0xe0
[ 221.922135] ? trace_hardirqs_on+0x38/0x100
[ 221.922136] pr_cont_kernfs_path.cold+0x49/0x4b
[ 221.922137] mem_cgroup_print_oom_context.cold+0x74/0xc3
[ 221.922138] dump_header+0x340/0x3bf
[ 221.922139] oom_kill_process.cold+0xb/0x10
[ 221.922140] out_of_memory+0x1e9/0x860
[ 221.922141] ? oom_killer_disable+0x210/0x210
[ 221.922142] mem_cgroup_out_of_memory+0x198/0x1c0
[ 221.922143] ? mem_cgroup_count_precharge_pte_range+0x250/0x250
[ 221.922144] try_charge+0xa9b/0xc50
[ 221.922145] ? arch_stack_walk+0x9e/0xf0
[ 221.922146] ? memory_high_write+0x230/0x230
[ 221.922146] ? avc_has_extended_perms+0x830/0x830
[ 221.922147] ? stack_trace_save+0x94/0xc0
[ 221.922148] ? stack_trace_consume_entry+0x90/0x90
[ 221.922149] __memcg_kmem_charge+0x73/0x120
[ 221.922150] ? cred_has_capability+0x10f/0x200
[ 221.922151] ? mem_cgroup_can_attach+0x260/0x260
[ 221.922152] ? selinux_sb_eat_lsm_opts+0x2f0/0x2f0
[ 221.922153] ? obj_cgroup_charge+0x16b/0x220
[ 221.922154] ? kmem_cache_alloc+0x78/0x4c0
[ 221.922155] obj_cgroup_charge+0x122/0x220
[ 221.922156] ? vm_area_alloc+0x20/0x90
[ 221.922156] kmem_cache_alloc+0x78/0x4c0
[ 221.922157] vm_area_alloc+0x20/0x90
[ 221.922158] mmap_region+0x3ed/0x9a0
[ 221.922159] ? cap_mmap_addr+0x1d/0x80
[ 221.922160] do_mmap+0x3ee/0x720
[ 221.922161] vm_mmap_pgoff+0x16a/0x1c0
[ 221.922162] ? randomize_stack_top+0x90/0x90
[ 221.922163] ? copy_page_range+0x1980/0x1980
[ 221.922163] ksys_mmap_pgoff+0xab/0x350
[ 221.922164] ? find_mergeable_anon_vma+0x110/0x110
[ 221.922165] ? __audit_syscall_entry+0x1a6/0x1e0
[ 221.922166] __x64_sys_mmap+0x8d/0xb0
[ 221.922167] do_syscall_64+0x38/0x50
[ 221.922168] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 221.922169] RIP: 0033:0x7fe8f5e75103
[ 221.922172] Code: 54 41 89 d4 55 48 89 fd 53 4c 89 cb 48 85 ff 74
56 49 89 d9 45 89 f8 45 89 f2 44 89 e2 4c 89 ee 48 89 ef b8 09 00 00
00 0f 05 <48> 3d 00 f0 ff ff 77 7d 5b 5d 41 5c 41 5d 41 5e 41 5f c3 66
2e 0f
[ 221.922173] RSP: 002b:00007ffd38c90198 EFLAGS: 00000246 ORIG_RAX:
0000000000000009
[ 221.922175] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fe8f5e75103
[ 221.922176] RDX: 0000000000000003 RSI: 0000000000001000 RDI: 0000000000000000
[ 221.922178] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
[ 221.922179] R10: 0000000000002022 R11: 0000000000000246 R12: 0000000000000003
[ 221.922180] R13: 0000000000001000 R14: 0000000000002022 R15: 0000000000000000
[ 221.922181]
[ 213O[ 221.922182] The buggy address belongs to the variable:
[ 221.922183] clear_seq+0x2d/0x40
[ 221.922183]
[ 221.922184] Memory state around the buggy address:
[ 221.922185] ffffffffba51da80: 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00
[ 221.922187] ffffffffba51db00: 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00
[ 221.922188] >ffffffffba51db80: f9 f9 f9 f9 00 f9 f9 f9 f9 f9 f9 f9
00 f9 f9 f9
[ 221.922189] ^
[ 221.922190] ffffffffba51dc00: f9 f9 f9 f9 00 f9 f9 f9 f9 f9 f9 f9
00 f9 f9 f9
[ 221.922191] ffffffffba51dc80: f9 f9 f9 f9 01 f9 f9 f9 f9 f9 f9 f9
00 f9 f9 f9
[ 221.922193] ==================================================================
[ 221.922194] Disabling lock debugging due to kernel taint
[ 221.922196] ,task=memcg_test_1,pid=11280,uid=0
[ 221.922205] Memory cgroup out of memory: Killed process 11280
Link: https://lore.kernel.org/r/CA+G9fYt46oC7-BKryNDaaXPJ9GztvS2cs_7GjYRjanRi4+ryCQ@mail.gmail.com
Fixes: 4cfc7258f876a7feba673ac ("printk: ringbuffer: add finalization/extension support")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reviewed-by: John Ogness <john.ogness@linutronix.de>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20201014175051.GC13775@alley
|
|
On arm64, the global variable memstart_addr represents the physical
address of PAGE_OFFSET, and so physical to virtual translations or
vice versa used to come down to simple additions or subtractions
involving the values of PAGE_OFFSET and memstart_addr.
When support for 52-bit virtual addressing was introduced, we had to
deal with PAGE_OFFSET potentially being outside of the region that
can be covered by the virtual range (as the 52-bit VA capable build
needs to be able to run on systems that are only 48-bit VA capable),
and for this reason, another translation was introduced, and recorded
in the global variable physvirt_offset.
However, if we go back to the original definition of memstart_addr,
i.e., the physical address of PAGE_OFFSET, it turns out that there is
no need for two separate translations: instead, we can simply subtract
the size of the unaddressable VA space from memstart_addr to make the
available physical memory appear in the 48-bit addressable VA region.
This simplifies things, but also fixes a bug on KASLR builds, which
may update memstart_addr later on in arm64_memblock_init(), but fails
to update vmemmap and physvirt_offset accordingly.
Fixes: 5383cc6efed1 ("arm64: mm: Introduce vabits_actual")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Steve Capper <steve.capper@arm.com>
Link: https://lore.kernel.org/r/20201008153602.9467-2-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
If RV3028_CTRL1_EERD is not set (this is the default), the RTC will refresh
the RAM configuration registers from the EEPROM at midnight. It is
necessary to save the RAM registers back to EEPROM after modifying them.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201009153101.721149-4-alexandre.belloni@bootlin.com
|
|
Both rv3028_eeprom_write and rv3028_eeprom_read enable EERD before sending
commands to the EEPROM and restore it afterwards. Factorize this code.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201009153101.721149-3-alexandre.belloni@bootlin.com
|
|
Version 1.0 of the application manual had the wrong resistor values. Fix
them according to version 1.1
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201009153101.721149-2-alexandre.belloni@bootlin.com
|
|
rv3028_clkout_set_rate unconditionally sets RV3028_CLKOUT_CLKOE but
clk_set_rate may be called with the clock disabled. Ensure the clock is
kept disabled if it was not yet enabled.
Also, the actual rate was overwritten when enabling the clock, properly
write to the register only once.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201009153101.721149-1-alexandre.belloni@bootlin.com
|
|
Removing the struct member "dev" in mt6397 RTC driver because it's not
initialized and the only usage is for one debugging message.
Also fixed a typo in the error message.
Signed-off-by: Fei Shao <fshao@chromium.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201008093414.1911699-1-fshao@chromium.org
|
|
It doesn't make sense to issue prctl(PR_PAC_RESET_KEYS) on a
compat task because the 32-bit instruction set does not offer PAuth
instructions. For consistency with other 64-bit only prctls such as
{SET,GET}_TAGGED_ADDR_CTRL, reject the prctl on compat tasks.
Although this is a userspace-visible change, maybe it isn't too late
to make this change given that the hardware isn't available yet and
it's very unlikely that anyone has 32-bit software that actually
depends on this succeeding.
Signed-off-by: Peter Collingbourne <pcc@google.com>
Link: https://linux-review.googlesource.com/id/Ie885a1ff84ab498cc9f62d6451e9f2cfd4b1d06a
Link: https://lore.kernel.org/r/20201014052430.11630-1-pcc@google.com
[will: Do the same for the SVE prctl()s]
Signed-off-by: Will Deacon <will@kernel.org>
|
|
This is a major rework of the sticon (parisc text console) driver in
order to support user font support.
Usually one want to use the stifb (parisc framebuffer driver) which is
based on fbcon and does support fonts and colors, but some old machines
(e.g. HP 730 workstations) don't provide a supported stifb graphic card,
and for those user fonts are preferred.
This patch drops unused code for software cursor and scrollback,
enhances the debug output and adds better documentation.
The code was tested on various machines with byte-mode and word-mode
graphic cards on GSC- and PCI-busses.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
If the ROM provides functional STI routines, always register the sticon
driver, even if the serial console was choosen as boot device.
Additionally, in that case, do not make the sticon driver the default
output console device.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
We will not allow unitialized anon mmaps, but we need this define
to prevent build errors, e.g. the debian foot package.
Suggested-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Use READ_ONCE() to check if spinlock is locked.
The other changes are cleanups.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Tested-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Increase the number of lws locks to 256 entries (instead of 16) and
choose lock entry based on bits 3-11 (instead of 4-7) of the relevant
address. With this change we archieve more fine-grained locking in
futex syscalls and thus reduce the number of possible stalls.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Let the complier treat the pointers volatile to ensure that they get
accessed atomicly.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Correct the comments: The jump is forwards, not backwards.
Enable the interrupts after %r29 (reference param area) was loaded.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
This change allows the sync barrier instruction to be patched to a nop.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The kernel test robot reports missing functions. Add them.
hppa-linux-ld: drivers/firmware/arm_scmi/perf.o: in function `scmi_perf_fc_ring_db':
(.text+0x610): undefined reference to `ioread64_hi_lo'
(.text+0x63c): undefined reference to `iowrite64_hi_lo'
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Enable libata support for the Nat Semi NS87415 controller, and
disable the soon to be removed legacy ide driver entirely.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
HPUX has separate NDELAY & NONBLOCK values. In the past we wanted to
be able to run HP-UX binaries natively on parisc Linux which is why
we defined O_NONBLOCK to 000200004 to distinguish NDELAY & NONBLOCK
bits.
But with 2 bits set in this bitmask we often ran into compatibility
issues with other Linux applications which often only test one bit (or
even compare the values).
To avoid such issues in the future, this patch changes O_NONBLOCK to
become 000200000. That way old programs will still be functional, and
for new programs we now have only one bit set.
Update the comment about SOCK_NONBLOCK too.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Those flags are nowhere used in the Linux kernel and were added when we
still wanted to support HP-UX in a compat mode. Since we never will
support HP-UX, drop those flags.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
No need to allow external interrupts when the IPI loop is going to
finish now.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
When running on qemu, SeaBIOS-hppa stores the iomem address for the
emulated fw_cfg port in PAGE0_>pad0[2/3]. Let the Linux driver
auto-configure the fw_cfg interface with it, so that the fw_cfg info
shows up in /sys/firmware/qemu_fw_cfg.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Add a description for it, in order to avoids this warning:
./include/linux/input/sparse-keymap.h:43: warning: Function parameter or member 'sw' not described in 'key_entry'
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Changeset 53c72b590b3a ("rcu/tree: cache specified number of objects")
added new members for struct kfree_rcu_cpu, but didn't add the
corresponding at the kernel-doc markup, as repoted when doing
"make htmldocs":
./kernel/rcu/tree.c:3113: warning: Function parameter or member 'bkvcache' not described in 'kfree_rcu_cpu'
./kernel/rcu/tree.c:3113: warning: Function parameter or member 'nr_bkv_objs' not described in 'kfree_rcu_cpu'
So, move the description for bkvcache to kernel-doc, and add a
description for nr_bkv_objs.
Fixes: 53c72b590b3a ("rcu/tree: cache specified number of objects")
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Changeset df78a0c0b67d ("nl80211: S1G band and channel definitions")
added a new parameter, but didn't add the corresponding kernel-doc
markup, as repoted when doing "make htmldocs":
./include/net/cfg80211.h:471: warning: Function parameter or member 's1g_cap' not described in 'ieee80211_supported_band'
Add a documentation for it.
Fixes: df78a0c0b67d ("nl80211: S1G band and channel definitions")
Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The typec_bus.rst asks for documentation of those two
functions, but they don't exist:
./drivers/usb/typec/bus.c:1: warning: 'typec_altmode_unregister_driver' not found
./drivers/usb/typec/bus.c:1: warning: 'typec_altmode_register_driver' not found
Also, they're not declared on bus.c but, instead, at a header
file (typec_altmode.h).
So, add documentation for both functions at the header and
change the kernel-doc markup under typec_bus.rst to point
to the right place.
While here, also place the documentation for both structs
declared on typec_altmode.h at the rst file.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
As warned by:
./include/kunit/test.h:504: WARNING: Block quote ends without a blank line; unexpected unindent.
The right way to describe a function is:
name - description
Instead, kunit_remove_resource was using:
name: description
Causing it to be improperly parsed.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
