| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2025-06-10 (i40e, iavf, ice, e1000)
For i40e:
Robert Malz improves reset handling for situations where multiple reset
requests could cause some to be missed.
For iavf:
Ahmed adds detection, and handling, of reset that could occur early in
the initialization process to stop long wait/hangs.
For ice:
Anton, properly, sets missed use_nsecs value.
For e1000:
Joe Damato moves cancel_work_sync() call to avoid deadlock.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
e1000: Move cancel_work_sync to avoid deadlock
ice/ptp: fix crosstimestamp reporting
iavf: fix reset_task for early reset event
i40e: retry VFLR handling if there is ongoing VF reset
i40e: return false from i40e_reset_vf if reset is in progress
====================
Link: https://patch.msgid.link/20250610171348.1476574-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
'managed' is a non-boolean property specified in ethernet-controller.yaml.
Since commit c141ecc3cecd7 ("of: Warn when of_property_read_bool() is
used on non-boolean properties") this raises a warning. Use the
replacement of_property_present() instead.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Sean Anderson <sean.anderson@linux.dev>
Link: https://patch.msgid.link/20250610114057.414791-1-alexander.stein@ew.tq-group.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Constify variable fphy_status and make it static.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/0890f92e-a03d-4aa7-8bc8-94123d253f22@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Convert to percpu netstats to avoid lock contention when reading them.
Signed-off-by: Qingfang Deng <dqfext@gmail.com>
Link: https://patch.msgid.link/20250610083211.909015-1-dqfext@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use sched-ext@lists.linux.dev instead of LKML.
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
This entry is covered by the entry in the next line already.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/2d81fe20-f71d-4483-817d-d46f9ec88cce@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
According to Realtek [0] it's safe to enable EEE at 5Gbps on RTL8126.
[0] https://www.spinics.net/lists/netdev/msg1091873.html
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/18ce0996-0182-4a11-a93a-df14b0e6876c@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Devlink info allows to expose serial number and board serial number
Get the values from PCI VPD and expose it.
$ devlink dev info
pci/0000:08:00.0:
driver mlx5_core
serial_number e4397f872caeed218000846daa7d2f49
board.serial_number MT2314XZ00YA
versions:
fixed:
fw.psid MT_0000000894
running:
fw.version 28.41.1000
fw 28.41.1000
stored:
fw.version 28.41.1000
fw 28.41.1000
auxiliary/mlx5_core.eth.0:
driver mlx5_core.eth
pci/0000:08:00.1:
driver mlx5_core
serial_number e4397f872caeed218000846daa7d2f49
board.serial_number MT2314XZ00YA
versions:
fixed:
fw.psid MT_0000000894
running:
fw.version 28.41.1000
fw 28.41.1000
stored:
fw.version 28.41.1000
fw 28.41.1000
auxiliary/mlx5_core.eth.1:
driver mlx5_core.eth
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Acked-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250610025128.109232-1-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Donald Hunter says:
====================
netlink: specs: fix all the yamllint errors
yamllint reported ~500 errors and warnings in the netlink specs. Fix all
the reported issues.
Link: https://lore.kernel.org/netdev/m2tt4tt3wv.fsf@gmail.com/
====================
Link: https://patch.msgid.link/20250610125944.85265-1-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Clean up the remaining yamllint warnings in the netlink specs:
[warning] comment not indented like content (comments-indentation)
[error] too many spaces after colon (colons)
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> # mptcp_pm.yaml
Link: https://patch.msgid.link/20250610125944.85265-8-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Clean up all line too long errors reported by yamllint in the netlink
specs, e.g.
error line too long (97 > 80 characters) (line-length)
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> # mptcp_pm.yaml
Link: https://patch.msgid.link/20250610125944.85265-7-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Clean up all indentation related errors reported by yamllint in the
netlink specs, e.g.
error wrong indentation: expected 6 but found 5 (indentation)
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> # mptcp_pm.yaml
Link: https://patch.msgid.link/20250610125944.85265-6-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Clean up all truthy value warnings reported by yamllint in the
netlink specs:
warning truthy value should be one of [false, true] (truthy)
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> # mptcp_pm.yaml
Link: https://patch.msgid.link/20250610125944.85265-5-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Clean up all comments warnings reported by yamllint in the netlink specs:
warning too few spaces before comment: expected 2 (comments)
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> # mptcp_pm.yaml
Link: https://patch.msgid.link/20250610125944.85265-4-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Clean up all space inside brackets errors reported by yamllint in
the netlink specs:
error too many spaces inside brackets (brackets)
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> # mptcp_pm.yaml
Link: https://patch.msgid.link/20250610125944.85265-3-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Clean up all document-start warnings reported by yamllint in the
netlink specs:
warning missing document start "---" (document-start)
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> # mptcp_pm.yaml
Link: https://patch.msgid.link/20250610125944.85265-2-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This fixes the following errors:
net/bluetooth/mgmt.c:5400:59: sparse: sparse: incorrect type in argument 3
(different base types) @@ expected unsigned short [usertype] handle @@
got restricted __le16 [usertype] monitor_handle @@
net/bluetooth/mgmt.c:5400:59: sparse: expected unsigned short [usertype] handle
net/bluetooth/mgmt.c:5400:59: sparse: got restricted __le16 [usertype] monitor_handle
Fixes: e6ed54e86aae ("Bluetooth: MGMT: Fix UAF on mgmt_remove_adv_monitor_complete")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202506060347.ux2O1p7L-lkp@intel.com/
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Currently bc_sid is being ignore when acting as Broadcast Source role,
so this fix it by passing the bc_sid and then use it when programming
the PA:
< HCI Command: LE Set Exte.. (0x08|0x0036) plen 25
Handle: 0x01
Properties: 0x0000
Min advertising interval: 140.000 msec (0x00e0)
Max advertising interval: 140.000 msec (0x00e0)
Channel map: 37, 38, 39 (0x07)
Own address type: Random (0x01)
Peer address type: Public (0x00)
Peer address: 00:00:00:00:00:00 (OUI 00-00-00)
Filter policy: Allow Scan Request from Any, Allow Connect Request from Any (0x00)
TX power: Host has no preference (0x7f)
Primary PHY: LE 1M (0x01)
Secondary max skip: 0x00
Secondary PHY: LE 2M (0x02)
SID: 0x01
Scan request notifications: Disabled (0x00)
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
BT_SK_PA_SYNC is only valid for Broadcast Sinks which means socket used
for Broadcast Sources wouldn't be able to use the likes of getpeername
to read out the sockaddr_iso_bc fields which may have been update (e.g.
bc_sid).
Fixes: 0a766a0affb5 ("Bluetooth: ISO: Fix getpeername not returning sockaddr_iso_bc fields")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
eir_create_adv_data may attempt to add EIR_FLAGS and EIR_TX_POWER
without checking if that would fit.
Link: https://github.com/bluez/bluez/issues/1117#issuecomment-2958244066
Fixes: 01ce70b0a274 ("Bluetooth: eir: Move EIR/Adv Data functions to its own file")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
When using and existing adv_info instance for broadcast source it
needs to be updated to periodic first before it can be reused, also in
case the existing instance already have data hci_set_adv_instance_data
cannot be used directly since it would overwrite the existing data so
this reappend the original data after the Broadcast ID, if one was
generated.
Example:
bluetoothctl># Add PBP to EA so it can be later referenced as the BIS ID
bluetoothctl> advertise.service 0x1856 0x00 0x00
bluetoothctl> advertise on
...
< HCI Command: LE Set Extended Advertising Data (0x08|0x0037) plen 13
Handle: 0x01
Operation: Complete extended advertising data (0x03)
Fragment preference: Minimize fragmentation (0x01)
Data length: 0x09
Service Data: Public Broadcast Announcement (0x1856)
Data[2]: 0000
Flags: 0x06
LE General Discoverable Mode
BR/EDR Not Supported
...
bluetoothctl># Attempt to acquire Broadcast Source transport
bluetoothctl>transport.acquire /org/bluez/hci0/pac_bcast0/fd0
...
< HCI Command: LE Set Extended Advertising Data (0x08|0x0037) plen 255
Handle: 0x01
Operation: Complete extended advertising data (0x03)
Fragment preference: Minimize fragmentation (0x01)
Data length: 0x0e
Service Data: Broadcast Audio Announcement (0x1852)
Broadcast ID: 11371620 (0xad8464)
Service Data: Public Broadcast Announcement (0x1856)
Data[2]: 0000
Flags: 0x06
LE General Discoverable Mode
BR/EDR Not Supported
Link: https://github.com/bluez/bluez/issues/1117
Fixes: eca0ae4aea66 ("Bluetooth: Add initial implementation of BIS connections")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This commit introduces a new vmtest.sh runner for vsock.
It uses virtme-ng/qemu to run tests in a VM. The tests validate G2H,
H2G, and loopback. The testing tools from tools/testing/vsock/ are
reused. Currently, only vsock_test is used.
VMCI and hyperv support is included in the config file to be built with
the -b option, though not used in the tests.
Only tested on x86.
To run:
$ make -C tools/testing/selftests TARGETS=vsock
$ tools/testing/selftests/vsock/vmtest.sh
or
$ make -C tools/testing/selftests TARGETS=vsock run_tests
Example runs (after make -C tools/testing/selftests TARGETS=vsock):
$ ./tools/testing/selftests/vsock/vmtest.sh
1..3
ok 0 vm_server_host_client
ok 1 vm_client_host_server
ok 2 vm_loopback
SUMMARY: PASS=3 SKIP=0 FAIL=0
Log: /tmp/vsock_vmtest_m7DI.log
$ ./tools/testing/selftests/vsock/vmtest.sh vm_loopback
1..1
ok 0 vm_loopback
SUMMARY: PASS=1 SKIP=0 FAIL=0
Log: /tmp/vsock_vmtest_a1IO.log
$ mkdir -p ~/scratch
$ make -C tools/testing/selftests install TARGETS=vsock INSTALL_PATH=~/scratch
[... omitted ...]
$ cd ~/scratch
$ ./run_kselftest.sh
TAP version 13
1..1
# timeout set to 300
# selftests: vsock: vmtest.sh
# 1..3
# ok 0 vm_server_host_client
# ok 1 vm_client_host_server
# ok 2 vm_loopback
# SUMMARY: PASS=3 SKIP=0 FAIL=0
# Log: /tmp/vsock_vmtest_svEl.log
ok 1 selftests: vsock: vmtest.sh
Future work can include vsock_diag_test.
Because vsock requires a VM to test anything other than loopback, this
patch adds vmtest.sh as a kselftest itself. This is different than other
systems that have a "vmtest.sh", where it is used as a utility script to
spin up a VM to run the selftests as a guest (but isn't hooked into
kselftest).
Signed-off-by: Bobby Eshleman <bobbyeshleman@gmail.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20250609-vsock-vmtest-v10-1-7f37198e1cd4@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The len parameter is considered optional so it can be NULL so it cannot
be used for skipping to next entry of EIR_SERVICE_DATA.
Fixes: 8f9ae5b3ae80 ("Bluetooth: eir: Add helpers for managing service data")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Convert the PMEM device tree binding from text to YAML. This will allow
device trees with pmem-region nodes to pass dtbs_check.
[iweiny: fix ups from Rob/Drew]
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Drew Fustini <drew@pdp7.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Link: https://patch.msgid.link/20250606184405.359812-4-drew@pdp7.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
|
|
The commit ee971630f20f ("bpf: Allow some trace helpers for all prog
types") made bpf_get_cgroup_classid_curr helper available to all BPF
program types, not just networking programs.
This helper calls __task_get_classid() which internally calls
task_cls_state() requiring rcu_read_lock_bh_held(). This works
in networking/tc context where RCU BH is held, but triggers an RCU
warning when called from other contexts like BPF syscall programs
that run under rcu_read_lock_trace():
WARNING: suspicious RCU usage
6.15.0-rc4-syzkaller-g079e5c56a5c4 #0 Not tainted
-----------------------------
net/core/netclassid_cgroup.c:24 suspicious rcu_dereference_check() usage!
Fix this by also accepting rcu_read_lock_held() and
rcu_read_lock_trace_held() as valid RCU contexts in the
task_cls_state() function. This ensures the helper works correctly
in all needed RCU contexts where it might be called, regular RCU,
RCU BH (for networking), and RCU trace (for BPF syscall programs).
Fixes: ee971630f20f ("bpf: Allow some trace helpers for all prog types")
Reported-by: syzbot+b4169a1cfb945d2ed0ec@syzkaller.appspotmail.com
Signed-off-by: Charalampos Mitrodimas <charmitro@posteo.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20250611-rcu-fix-task_cls_state-v3-1-3d30e1de753f@posteo.net
Closes: https://syzkaller.appspot.com/bug?extid=b4169a1cfb945d2ed0ec
|
|
Invert the FINAL_PUT bit so that test_bit_acquire and clear_bit_unlock
can be used instead of smp_mb.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
During platform init, SNP initialization may fail for several reasons,
such as firmware command failures and incompatible versions. However,
the KVM capability may continue to advertise support for it.
The platform may have SNP enabled but if SNP_INIT fails then SNP is
not supported by KVM.
During KVM module initialization query the SNP platform status to obtain
the SNP initialization state and use it as an additional condition to
determine support for SEV-SNP.
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Co-developed-by: Pratik R. Sampat <prsampat@amd.com>
Signed-off-by: Pratik R. Sampat <prsampat@amd.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Reviewed-by: Pavan Kumar Paluri <papaluri@amd.com>
Message-ID: <20250512221634.12045-1-Ashish.Kalra@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.16, take #2
- Rework of system register accessors for system registers that are
directly writen to memory, so that sanitisation of the in-memory
value happens at the correct time (after the read, or before the
write). For convenience, RMW-style accessors are also provided.
- Multiple fixes for the so-called "arch-timer-edge-cases' selftest,
which was always broken.
|
|
igc already supports enabling MAC Merge for FPE. This patch adds
support for preemptible queues in mqprio.
Tested preemption with mqprio by:
1. Enable FPE:
ethtool --set-mm enp1s0 pmac-enabled on tx-enabled on verify-enabled on
2. Enable preemptible queue in mqprio:
mqprio num_tc 4 map 0 1 2 3 0 0 0 0 0 0 0 0 0 0 0 0 \
queues 1@0 1@1 1@2 1@3 \
fp P P P E
Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Changes:
1. Introduce tx_enabled flag to control preemptible queue. tx_enabled
is set via mmsv module based on multiple factors, including link
up/down status, to determine if FPE is active or inactive.
2. Add priority field to TXDCTL for express queue to improve data
fetch performance.
3. Block preemptible queue setup in taprio unless reverse-tsn-txq-prio
private flag is set. Encourages adoption of standard queue priority
scheme for new features.
4. Hardware-padded frames from preemptible queues result in incorrect
mCRC values, as padding bytes are excluded from the computation. Pad
frames to at least 60 bytes using skb_padto() before transmission to
ensure the hardware includes padding in the mCRC calculation.
Tested preemption with taprio by:
1. Enable FPE:
ethtool --set-mm enp1s0 pmac-enabled on tx-enabled on verify-enabled on
2. Enable private flag to reverse TX queue priority:
ethtool --set-priv-flags enp1s0 reverse-txq-prio on
3. Enable preemptible queue in taprio:
taprio num_tc 4 map 0 1 2 3 0 0 0 0 0 0 0 0 0 0 0 0 \
queues 1@0 1@1 1@2 1@3 \
fp P P P E
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Co-developed-by: Chwee-Lin Choong <chwee.lin.choong@intel.com>
Signed-off-by: Chwee-Lin Choong <chwee.lin.choong@intel.com>
Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
By default, igc assigns TX hw queue 0 the highest priority and queue 3
the lowest. This is opposite of most NICs, where TX hw queue 3 has the
highest priority and queue 0 the lowest.
mqprio in igc already uses TX arbitration unconditionally to reverse TX
queue priority when mqprio is enabled. The TX arbitration logic does not
require a private flag, because mqprio was added recently and no known
users depend on the default queue ordering, which differs from the typical
convention.
taprio does not use TX arbitration, so it inherits the default igc TX
queue priority order. This causes tc command inconsistencies when
configuring frame preemption with taprio compared to mqprio in igc.
Other tc command inconsistencies and configuration issues already exist
when using taprio on igc compared to other network controllers. These
issues are described in a later section.
To harmonize TX queue priority behavior between taprio and mqprio, and
to fix these issues without breaking long-standing taprio use cases,
this patch adds a new private flag, called reverse-tsn-txq-prio, to
reverse the TX queue priority. It makes queue 3 the highest and queue 0
the lowest, reusing the TX arbitration logic already used by mqprio.
Users must set the private flag when enabling frame preemption with
taprio to follow the standard convention. Doing so promotes adoption of
the correct priority model for new features while preserving
compatibility with legacy configurations.
This new private flag addresses:
1. Non-standard socket -> tc -> TX hw queue mapping for taprio in igc
Without the private flag:
- taprio maps (socket -> tc -> TX hardware queue) differently on igc
compared to other network controllers
- On igc, mqprio maps tc differently from taprio, since mqprio already
uses TX arbitration
The following examples compare taprio configuration on igc and other
network controllers:
a) On other NICs (TX hw queue 3 is highest priority):
taprio num_tc 4 map 0 1 2 3 .... \
queues 1@0 1@1 1@2 1@3
Mapping translates to:
socket 0 -> tc 0 -> queue 0
socket 3 -> tc 3 -> queue 3
This is the normal mapping that respects the standard convention:
higher socket number -> higher tc -> higher priority TX hw queue
b) On igc (TX hw queue 0 is highest priority by default):
taprio num_tc 4 map 3 2 1 0 .... \
queues 1@0 1@1 1@2 1@3
Mapping translates to:
socket 0 -> tc 3 -> queue 3
socket 3 -> tc 0 -> queue 0
This igc tc mapping example is based on Intel's TSN validation test
case, where a higher socket priority maps to a higher priority queue.
It respects the mapping:
higher socket number -> higher priority TX hw queue
but breaks the expected ordering:
higher tc -> higher priority TX hw queue
as defined in [Ref1]. This custom mapping complicates common taprio
setup across NICs.
2. Non-standard frame preemption mapping for taprio in igc
Without the private flag:
- Compared to other network controllers, taprio on igc must flip the
expected fp sequence, since express traffic is expected to map to the
highest priority queue and preemptible traffic to lower ones
- On igc, frame preemption configuration for mqprio differs from taprio,
since mqprio already uses TX arbitration
The following examples compare taprio frame preemption configuration on
igc and other network controllers:
a) On other NICs (TX hw queue 3 is highest priority):
taprio num_tc 4 map ..... \
queues 1@0 1@1 1@2 1@3 \
fp P P P E
Mapping translates to:
tc0, tc1, tc2 -> preemptible -> queue 0, 1, 2
tc3 -> express -> queue 3
This is the normal mapping that respects the standard convention:
higher tc -> express traffic -> higher priority TX hw queue
lower tc -> preemptible traffic -> lower priority TX hw queue
b) On igc (TX hw queue 0 is highest priority by default):
taprio num_tc 4 map ...... \
queues 1@0 1@1 1@2 1@3 \
fp E P P P
Mapping translates to:
tc0 -> express -> queue 0
tc1, tc2, tc3 -> preemptible -> queue 1, 2, 3
This inversion respects the mapping of:
express traffic -> higher priority TX hw queue
but breaks the expected ordering:
higher tc -> express traffic
as defined in [Ref1] where higher tc indicates higher priority. In
this case, the lower tc0 is assigned to express traffic. This custom
mapping further complicates common preemption setup across NICs.
Tests were performed on taprio with the following combinations, where
two apps send traffic simultaneously on different queues:
Private Flag Traffic Sent By Traffic Sent By
----------------------------------------------------------------
enabled iperf3 (queue 3) iperf3 (queue 0)
disabled iperf3 (queue 0) iperf3 (queue 3)
enabled iperf3 (queue 3) real-time app (queue 0)
disabled iperf3 (queue 0) real-time app (queue 3)
enabled real-time app (queue 3) iperf3 (queue 0)
disabled real-time app (queue 0) iperf3 (queue 3)
enabled real-time app (queue 3) real-time app (queue 0)
disabled real-time app (queue 0) real-time app (queue 3)
Private flag is controlled with:
ethtool --set-priv-flags enp1s0 reverse-tsn-txq-prio <on|off>
[Ref1]
IEEE 802.1Q clause 8.6.8 Transmission selection:
"For a given Port and traffic class, frames are selected from the
corresponding queue for transmission if and only if:
...
b) For each queue corresponding to a numerically higher value of traffic
class supported by the Port, the operation of the transmission selection
algorithm supported by that queue determines that there is no frame
available for transmission."
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Previously, TX arbitration prioritized queues based on the TC they were
mapped to. A queue mapped to TC 3 had higher priority than one mapped to
TC 0.
To improve code reuse for upcoming patches and align with typical NIC
behavior, this patch updates the logic to prioritize higher queue numbers
when mqprio is used. As a result, queue 0 becomes the lowest priority and
queue 3 becomes the highest.
This patch also introduces igc_tsn_is_tc_to_queue_priority_ordered() to
preserve the original TC-based priority rule and reject configurations
where a higher TC maps to a lower queue offset.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Refactor TXDCTL macro handling to use FIELD_PREP and GENMASK macros.
This prepares the code for adding a new TXDCTL priority field in an
upcoming patch.
Verified that the macro values remain unchanged before and after
refactoring.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Rename macros to use the DCTL prefix for consistency with existing
macros that reference the same register. This prepares for an upcoming
patch that adds new fields to TXDCTL.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Move and consolidate TXDCTL and RXDCTL macros in preparation for
upcoming TXDCTL changes. This improves organization and readability.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
If reset_control_acquire() fails, then we can't return directly.
We need to do a little clean up first.
Fixes: cf2c3eceb757 ("spi: stm32-ospi: Make usage of reset_control_acquire/release() API")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/aEmAGTUzzKZlLe3K@stanley.mountain
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Once the global hash is requested there is no way back to switch back to
the per-task private hash. This is checked at the begin of the function.
It is possible that two threads simultaneously request the global hash
and both pass the initial check and block later on the
mm::futex_hash_lock. In this case the first thread performs the switch
to the global hash. The second thread will also attempt to switch to the
global hash and while doing so, accessing the nonexisting slot 1 of the
struct futex_private_hash.
The same applies if the hash is made immutable: There is no reference
counting and the hash must not be replaced.
Verify under mm_struct::futex_phash that neither the global hash nor an
immutable hash in use.
Tested-by: "Lai, Yi" <yi1.lai@linux.intel.com>
Reported-by: "Lai, Yi" <yi1.lai@linux.intel.com>
Closes: https://lore.kernel.org/all/aDwDw9Aygqo6oAx+@ly-workstation/
Fixes: bd54df5ea7cad ("futex: Allow to resize the private local hash")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/all/20250610104400.1077266-5-bigeasy@linutronix.de/
|
|
The selftest can reproduce an issue where using bpf_msg_pop_data() in
ktls causes errors on the receiving end.
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20250609020910.397930-3-jiayuan.chen@linux.dev
|
|
When sending plaintext data, we initially calculated the corresponding
ciphertext length. However, if we later reduced the plaintext data length
via socket policy, we failed to recalculate the ciphertext length.
This results in transmitting buffers containing uninitialized data during
ciphertext transmission.
This causes uninitialized bytes to be appended after a complete
"Application Data" packet, leading to errors on the receiving end when
parsing TLS record.
Fixes: d3b18ad31f93 ("tls: add bpf support to sk_msg handling")
Reported-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/bpf/20250609020910.397930-2-jiayuan.chen@linux.dev
|
|
Previously, the block layer stored the requests in the plug list in
LIFO order. For this reason, blk_attempt_plug_merge() would check
just the head entry for a back merge attempt, and abort after that
unless requests for multiple queues existed in the plug list. If more
than one request is present in the plug list, this makes the one-shot
back merging less useful than before, as it'll always fail to find a
quick merge candidate.
Use the tail entry for the one-shot merge attempt, which is the last
added request in the list. If that fails, abort immediately unless
there are multiple queues available. If multiple queues are available,
then scan the list. Ideally the latter scan would be a backwards scan
of the list, but as it currently stands, the plug list is singly linked
and hence this isn't easily feasible.
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/linux-block/20250611121626.7252-1-abuehaze@amazon.com/
Reported-by: Hazem Mohamed Abuelfotoh <abuehaze@amazon.com>
Fixes: e70c301faece ("block: don't reorder requests in blk_add_rq_to_plug")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Bios queued up in the zone write plug have already gone through all all
preparation in the submit_bio path, including the freeze protection.
Submitting them through submit_bio_noacct_nocheck duplicates the work
and can can cause deadlocks when freezing a queue with pending bio
write plugs.
Go straight to ->submit_bio or blk_mq_submit_bio to bypass the
superfluous extra freeze protection and checks.
Fixes: 9b1ce7f0c6f8 ("block: Implement zone append emulation")
Reported-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Tested-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20250611044416.2351850-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When blk_zone_write_plug_bio_endio() is called for a regular write BIO
used to emulate a zone append operation, that is, a BIO flagged with
BIO_EMULATES_ZONE_APPEND, the BIO operation code is restored to the
original REQ_OP_ZONE_APPEND but the BIO_EMULATES_ZONE_APPEND flag is not
cleared. Clear it to fully return the BIO to its orginal definition.
Fixes: 9b1ce7f0c6f8 ("block: Implement zone append emulation")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250611005915.89843-1-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Document recently merged feature auto buffer registration(UBLK_F_AUTO_BUF_REG).
Cc: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250611085632.109719-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
It isn't necessary to freeze queue for updating disk size given submit_bio()
doesn't grab queue usage counter for checking eod.
Also many driver won't freeze queue for calling set_capacity_and_notify().
Move lo_set_size() out of queue freeze for fixing many lockdep warning
report.
Link: https://lore.kernel.org/linux-block/67ea99e0.050a0220.3c3d88.0042.GAE@google.com/
Reported-by: syzbot+9dd7dbb1a4b915dee638@syzkaller.appspotmail.com
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250611084938.108829-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
According to the description of the Loongson-7A2000 ACPI GPIO register in
the manual, its access mode should be BIT_CTRL_MODE, otherwise there maybe
some unpredictable behavior.
Cc: stable@vger.kernel.org
Fixes: 44fe79020b91 ("gpio: loongson-64bit: Add more gpio chip support")
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Link: https://lore.kernel.org/r/20250610115926.347845-1-zhoubinbin@loongson.cn
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Both ARM and IBM CI reports RCU stall, which can be reproduced by the
below perf command.
perf record -a -e cpu-clock -- sleep 2
The issue is introduced by the generic throttle patch set, which
unconditionally invoke the event_stop() when throttle is triggered.
The cpu-clock and task-clock are two special SW events, which rely on
the hrtimer. The throttle is invoked in the hrtimer handler. The
event_stop()->hrtimer_cancel() waits for the handler to finish, which is
a deadlock. Instead of invoking the stop(), the HRTIMER_NORESTART should
be used to stop the timer.
There may be two ways to fix it:
- Introduce a PMU flag to track the case. Avoid the event_stop in
perf_event_throttle() if the flag is detected.
It has been implemented in the
https://lore.kernel.org/lkml/20250528175832.2999139-1-kan.liang@linux.intel.com/
The new flag was thought to be an overkill for the issue.
- Add a check in the event_stop. Return immediately if the throttle is
invoked in the hrtimer handler. Rely on the existing HRTIMER_NORESTART
method to stop the timer.
The latter is implemented here.
Move event->hw.interrupts = MAX_INTERRUPTS before the stop(). It makes
the order the same as perf_event_unthrottle(). Except the patch, no one
checks the hw.interrupts in the stop(). There is no impact from the
order change.
When stops in the throttle, the event should not be updated,
stop(event, 0). But the cpu_clock_event_stop() doesn't handle the flag.
In logic, it's wrong. But it didn't bring any problems with the old
code, because the stop() was not invoked when handling the throttle.
Checking the flag before updating the event.
Fixes: 9734e25fbf5a ("perf: Fix the throttle logic for a group")
Closes: https://lore.kernel.org/lkml/20250527161656.GJ2566836@e132581.arm.com/
Closes: https://lore.kernel.org/lkml/djxlh5fx326gcenwrr52ry3pk4wxmugu4jccdjysza7tlc5fef@ktp4rffawgcw/
Closes: https://lore.kernel.org/lkml/8e8f51d8-af64-4d9e-934b-c0ee9f131293@linux.ibm.com/
Closes: https://lore.kernel.org/lkml/4ce106d0-950c-aadc-0b6a-f0215cd39913@maine.edu/
Reported-by: Leo Yan <leo.yan@arm.com>
Reported-by: Aishwarya TCV <aishwarya.tcv@arm.com>
Reported-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Reported-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lkml.kernel.org/r/20250606192546.915765-1-kan.liang@linux.intel.com
|
|
When using publicly available tools like 'mdio-tools' to read/write data
from/to network interface and its PHY via C45 (clause 45) mdiobus,
there is no verification of parameters passed to the ioctl and
it accepts any mdio address.
Currently there is support for 32 addresses in kernel via PHY_MAX_ADDR define,
but it is possible to pass higher value than that via ioctl.
While read/write operation should generally fail in this case,
mdiobus provides stats array, where wrong address may allow out-of-bounds
read/write.
Fix that by adding address verification before C45 read/write operation.
While this excludes this access from any statistics, it improves security of
read/write operation.
Fixes: 4e4aafcddbbf ("net: mdio: Add dedicated C45 API to MDIO bus drivers")
Signed-off-by: Jakub Raczynski <j.raczynski@samsung.com>
Reported-by: Wenjing Shan <wenjing.shan@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When using publicly available tools like 'mdio-tools' to read/write data
from/to network interface and its PHY via mdiobus, there is no verification of
parameters passed to the ioctl and it accepts any mdio address.
Currently there is support for 32 addresses in kernel via PHY_MAX_ADDR define,
but it is possible to pass higher value than that via ioctl.
While read/write operation should generally fail in this case,
mdiobus provides stats array, where wrong address may allow out-of-bounds
read/write.
Fix that by adding address verification before read/write operation.
While this excludes this access from any statistics, it improves security of
read/write operation.
Fixes: 080bb352fad00 ("net: phy: Maintain MDIO device and bus statistics")
Signed-off-by: Jakub Raczynski <j.raczynski@samsung.com>
Reported-by: Wenjing Shan <wenjing.shan@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use common wrappers operating directly on the struct sg_table objects to
fix incorrect use of scatterlists sync calls. dma_sync_sg_for_*()
functions have to be called with the number of elements originally passed
to dma_map_sg_*() function, not the one returned in sgtable's nents.
Fixes: 1ffe09590121 ("udmabuf: fix dma-buf cpu access")
CC: stable@vger.kernel.org
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250507160913.2084079-3-m.szyprowski@samsung.com
|
|
Fix the TODO in ahci_broken_lpm() by using the proper BIOS build date.
The proper BIOS build date was provided by Hans, see Link.
Link: https://lore.kernel.org/linux-ide/6ea509c8-b38d-4941-8a29-c1117ff3dd5b@redhat.com/
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Link: https://lore.kernel.org/r/20250610110757.1318959-6-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
|
