| Age | Commit message (Collapse) | Author |
|---|
|
Add ipv4 support to the recently added chunks tests, which was added as
ipv6 only.
Signed-off-by: Mina Almasry <almasrymina@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250615203511.591438-3-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Trivial fix to unused variable.
Signed-off-by: Mina Almasry <almasrymina@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250615203511.591438-2-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Trivial fix to a couple of outdated netmem comments. No code changes,
just more accurately describing current code.
Signed-off-by: Mina Almasry <almasrymina@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250615203511.591438-1-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This commit adds a new kernel selftest to verify RTNLGRP_IPV4_MCADDR
and RTNLGRP_IPV6_MCADDR notifications. The test works by adding and
removing a dummy interface and then confirming that the system
correctly receives join and removal notifications for the 224.0.0.1
and ff02::1 multicast addresses.
The test relies on the iproute2 version to be 6.13+.
Tested by the following command:
$ vng -v --user root --cpus 16 -- \
make -C tools/testing/selftests TARGETS=net
TEST_PROGS=rtnetlink_notification.sh \
TEST_GEN_PROGS="" run_tests
Cc: Maciej Żenczykowski <maze@google.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: Yuyang Huang <yuyanghuang@google.com>
Link: https://patch.msgid.link/20250614053522.623820-1-yuyanghuang@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Álvaro Fernández Rojas says:
====================
net: dsa: b53: fix BCM5325 support
These patches get the BCM5325 switch working with b53.
The existing brcm legacy tag only works with BCM63xx switches.
We need to add a new legacy tag for BCM5325 and BCM5365 switches, which
require including the FCS and length.
I'm not really sure that everything here is correct since I don't work for
Broadcom and all this is based on the public datasheet available for the
BCM5325 and my own experiments with a Huawei HG556a (BCM6358).
Both sets of patches have been merged due to the change requested by Jonas
about BRCM_HDR register access depending on legacy tags.
====================
Link: https://patch.msgid.link/20250614080000.1884236-1-noltari@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
According to the datasheet, BCM5325 uses B53_PD_MODE_CTRL_25 register to
disable clocking to individual PHYs.
Only ports 1-4 can be enabled or disabled and the datasheet is explicit
about not toggling BIT(0) since it disables the PLL power and the switch.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250614080000.1884236-15-noltari@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
CPU port should be B53_CPU_PORT instead of B53_CPU_PORT_25 for
B53_PVLAN_PORT_MASK register.
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Link: https://patch.msgid.link/20250614080000.1884236-14-noltari@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
BCM5325 doesn't implement UC_FLOOD_MASK, MC_FLOOD_MASK and IPMC_FLOOD_MASK
registers.
This has to be handled differently with other pages and registers.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250614080000.1884236-13-noltari@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
BCM5325 doesn't implement GMII_PORT_OVERRIDE_CTRL register so we should
avoid reading or writing it.
PORT_OVERRIDE_RX_FLOW and PORT_OVERRIDE_TX_FLOW aren't defined on BCM5325
and we should use PORT_OVERRIDE_LP_FLOW_25 instead.
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Link: https://patch.msgid.link/20250614080000.1884236-12-noltari@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Older switches don't implement BRCM_HDR register so we should avoid
reading or writing it.
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Link: https://patch.msgid.link/20250614080000.1884236-11-noltari@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
BCM5325 doesn't implement DIS_LEARNING register so we should avoid reading
or writing it.
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Link: https://patch.msgid.link/20250614080000.1884236-10-noltari@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
BCM5325 doesn't implement B53_UC_FWD_EN, B53_MC_FWD_EN or B53_IPMC_FWD_EN.
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Link: https://patch.msgid.link/20250614080000.1884236-9-noltari@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
BCM5325 doesn't implement SWITCH_CTRL register so we should avoid reading
or writing it.
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Link: https://patch.msgid.link/20250614080000.1884236-8-noltari@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
BCM5325 doesn't implement FAST_AGE registers so we should avoid reading or
writing them.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250614080000.1884236-7-noltari@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
BCM5325 and BCM5365 are part of a much older generation of switches which,
due to their limited number of ports and VLAN entries (up to 256) allowed
a single 64-bit register to hold a full ARL entry.
This requires a little bit of massaging when reading, writing and
converting ARL entries in both directions.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Link: https://patch.msgid.link/20250614080000.1884236-6-noltari@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We need to be able to differentiate the BCM5325 variants because:
- BCM5325M switches lack the ARLIO_PAGE->VLAN_ID_IDX register.
- BCM5325E have less 512 ARL buckets instead of 1024.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250614080000.1884236-5-noltari@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 46c5176c586c ("net: dsa: b53: support legacy tags") introduced
support for legacy tags, but it turns out that BCM5325 and BCM5365
switches require the original FCS value and length, so they have to be
treated differently.
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Link: https://patch.msgid.link/20250614080000.1884236-4-noltari@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for legacy Broadcom FCS tags, which are similar to
DSA_TAG_PROTO_BRCM_LEGACY.
BCM5325 and BCM5365 switches require including the original FCS value and
length, as opposed to BCM63xx switches.
Adding the original FCS value and length to DSA_TAG_PROTO_BRCM_LEGACY would
impact performance of BCM63xx switches, so it's better to create a new tag.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250614080000.1884236-3-noltari@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move brcm_leg_tag_rcv() definition to top.
This function is going to be shared between two different tags.
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Link: https://patch.msgid.link/20250614080000.1884236-2-noltari@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The INVLPGB instruction has limits on how many pages it can invalidate
at once. That limit is enumerated in CPUID, read by the kernel, and
stored in 'invpgb_count_max'. Ranged invalidation, like
invlpgb_kernel_range_flush() break up their invalidations so
that they do not exceed the limit.
However, early boot code currently attempts to do ranged
invalidation before populating 'invlpgb_count_max'. There is a
for loop which is basically:
for (...; addr < end; addr += invlpgb_count_max*PAGE_SIZE)
If invlpgb_kernel_range_flush is called before the kernel has read
the value of invlpgb_count_max from the hardware, the normally
bounded loop can become an infinite loop if invlpgb_count_max is
initialized to zero.
Fix that issue by initializing invlpgb_count_max to 1.
This way INVPLGB at early boot time will be a little bit slower
than normal (with initialized invplgb_count_max), and not an
instant hang at bootup time.
Fixes: b7aa05cbdc52 ("x86/mm: Add INVLPGB support code")
Signed-off-by: Rik van Riel <riel@surriel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/20250606171112.4013261-3-riel%40surriel.com
|
|
Syzkaller reports [1, 2] crashes caused by an attempts to ping
the device which has failed to load firmware. Since such a device
doesn't pass 'ieee80211_register_hw()', an internal workqueue
managed by 'ieee80211_queue_work()' is not yet created and an
attempt to queue work on it causes null-ptr-deref.
[1] https://syzkaller.appspot.com/bug?extid=9a4aec827829942045ff
[2] https://syzkaller.appspot.com/bug?extid=0d8afba53e8fb2633217
Fixes: e4a668c59080 ("carl9170: fix spurious restart due to high latency")
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Christian Lamparter <chunkeey@gmail.com>
Link: https://patch.msgid.link/20250616181205.38883-1-dmantipov@yandex.ru
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
For WMI_REQUEST_VDEV_STAT request, firmware might split response into
multiple events dut to buffer limit, hence currently in
ath12k_wmi_fw_stats_process() host waits until all events received. In
case there is no vdev started, this results in that below condition
would never get satisfied
((++ar->fw_stats.num_vdev_recvd) == total_vdevs_started)
consequently the requestor would be blocked until time out.
The same applies to WMI_REQUEST_BCN_STAT request as well due to:
((++ar->fw_stats.num_bcn_recvd) == ar->num_started_vdevs)
Change to check the number of started vdev first: if it is zero, finish
directly; if not, follow the old way.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284.1-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Tested-on: QCN9274 hw2.0 WLAN.WBE.1.5-01651-QCAHKSWPL_SILICONZ-1
Fixes: e367c924768b ("wifi: ath12k: Request vdev stats from firmware")
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Link: https://patch.msgid.link/20250612-ath12k-fw-fixes-v1-4-12f594f3b857@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Currently ath12k_wmi_fw_stats_process() is using static variables to count
firmware stat events. Taking num_vdev as an example, if for whatever
reason (say ar->num_started_vdevs is 0 or firmware bug etc.) the following
condition
(++num_vdev) == total_vdevs_started
is not met, is_end is not set thus num_vdev won't be cleared. Next time
when firmware stats is requested again, even if everything is working
fine, failure is expected due to the condition above will never be
satisfied.
The same applies to num_bcn as well.
Change to use non-static counters and reset them each time before firmware
stats is requested.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284.1-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Tested-on: QCN9274 hw2.0 WLAN.WBE.1.5-01651-QCAHKSWPL_SILICONZ-1
Fixes: e367c924768b ("wifi: ath12k: Request vdev stats from firmware")
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Link: https://patch.msgid.link/20250612-ath12k-fw-fixes-v1-3-12f594f3b857@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
ath12k_mac_get_fw_stats() is busy polling fw_stats_done flag while waiting
firmware finishing sending all events. This is not good as CPU is
monopolized and kept burning during the wait.
Change to the completion mechanism to fix it.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284.1-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Tested-on: QCN9274 hw2.0 WLAN.WBE.1.5-01651-QCAHKSWPL_SILICONZ-1
Fixes: e367c924768b ("wifi: ath12k: Request vdev stats from firmware")
Reported-by: Grégoire Stein <gregoire.s93@live.fr>
Closes: https://lore.kernel.org/ath12k/AS8P190MB120575BBB25FCE697CD7D4988763A@AS8P190MB1205.EURP190.PROD.OUTLOOK.COM/
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Tested-by: Grégoire Stein <gregoire.s93@live.fr>
Link: https://patch.msgid.link/20250612-ath12k-fw-fixes-v1-2-12f594f3b857@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Regarding the firmware stats events handling, the comment in
ath12k_mac_get_fw_stats() says host determines whether all events have been
received based on 'end' tag in TLV. This is wrong as there is no such tag
at all, actually host makes the decision totally by itself based on the
stats type and active pdev/vdev counts etc.
Fix it to correctly reflect the logic.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284.1-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Tested-on: QCN9274 hw2.0 WLAN.WBE.1.5-01651-QCAHKSWPL_SILICONZ-1
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Link: https://patch.msgid.link/20250612-ath12k-fw-fixes-v1-1-12f594f3b857@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
In case of ML connection, currently all useful links are activated at
ASSOC stage:
ieee80211_set_active_links(vif, ieee80211_vif_usable_links(vif))
this results in firmware crash when the number of links activated on the
same device is more than supported.
Since firmware supports activating at most 2 links for a ML connection,
to avoid firmware crash, host needs to select 2 links out of the useful
links. As the assoc link has already been chosen, the question becomes
how to determine partner links. A straightforward principle applied
here is that the resulted combination should achieve the best throughput.
For that purpose, ideally various factors like bandwidth, RSSI etc should
be considered. But that would be too complicate. To make it easy, the
choice is to only take hardware modes into consideration.
The SBS (single band simultaneously) mode frequency range covers 5 GHz
and 6 GHz bands. In this mode, the two individual MACs are both active,
with one working on 5g-high band and the other on 5g-low band (from
hardware perspective 5 GHz and 6 GHz bands are referred to as a 'large'
single 5 GHz band). The DBS (dual band simultaneously) mode covers 2 GHz
band and the 'large' 5 GHz band, with one MAC working on 2 GHz band and
the other working on 5 GHz band or 6 GHz band. Since 5,6 GHz bands could
provide higher bandwidth than 2 GHz band, the preference is given to SBS
mode. Other hardware modes results in only one working MAC at any given
time, so it is chosen only when both SBS are DBS are not possible.
For each hardware mode, if there are more than one partner candidate,
just choose the first one.
For now only single device MLO case is handled as it is easy. Other cases
could be addressed in the future.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250522-ath12k-sbs-dbs-v1-6-54a29e7a3a88@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
In case of two links established on the same device in an ML connection,
depending on device's hardware mode capability, it is possible that both
links fall on the same MAC. Currently, no specific action is taken to
address this but just keep both links active. However this would result
in lower throughput compared to even one link, because switching between
these two links on the resulted MAC significantly impacts throughput.
Check if both links fall in the frequency range of a single MAC. If
so, send WMI_MLO_LINK_SET_ACTIVE_CMDID command to firmware such that
firmware can deactivate one of them. Note the decision of which link
getting deactivated is made by firmware, host only sends the vdev
lists.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250522-ath12k-sbs-dbs-v1-5-54a29e7a3a88@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Add WMI_MLO_LINK_SET_ACTIVE_CMDID command. This command allows host to
send required link information to firmware such that firmware can make
decision on activating/deactivating links in various scenarios.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250522-ath12k-sbs-dbs-v1-4-54a29e7a3a88@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Previous patches parse and save hardware MAC frequency range information
in ath12k_svc_ext_info structure. Such range represents hardware
capability hence needs to be updated based on host information, e.g. guard
the range based on host's low/high boundary.
So update frequency range. The updated range is saved in
ath12k_hw_mode_info structure and would be used when doing vdev activation
and link selection in following patches.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250522-ath12k-sbs-dbs-v1-3-54a29e7a3a88@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
WMI_SERVICE_READY_EXT2_EVENTID event
Firmware sends the boundary between lower and higher bands in
ath12k_wmi_dbs_or_sbs_cap_params structure embedded in
WMI_SERVICE_READY_EXT2_EVENTID event. The boundary is needed when
updating frequency range in the following patch. So parse and save
it for later use. Note ath12k_wmi_dbs_or_sbs_cap_params is placed
after some other structures, so placeholders for them are added
as well.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250522-ath12k-sbs-dbs-v1-2-54a29e7a3a88@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
WMI_SERVICE_READY_EXT_EVENTID event for later use
WLAN hardware might support various hardware modes such as DBS (dual
band simultaneously), SBS (single band simultaneously) and DBS_OR_SBS
etc, see enum wmi_host_hw_mode_config_type. Firmware advertises actual
supported modes in WMI_SERVICE_READY_EXT_EVENTID event. For each mode,
firmware advertises frequency range each hardware MAC can operate on.
In MLO case such information is necessary during vdev activation and
link selection (which is done in following patches), so add a new
structure ath12k_svc_ext_info to ath12k_wmi_base, then parse and save
those information to it for later use.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250522-ath12k-sbs-dbs-v1-1-54a29e7a3a88@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
When the ath12k driver is built without CONFIG_ATH12K_DEBUG, the
recently refactored stats code can cause any user space application
(such at NetworkManager) to consume 100% CPU for 3 seconds, every time
stats are read.
Commit 'b8a0d83fe4c7 ("wifi: ath12k: move firmware stats out of
debugfs")' moved ath12k_debugfs_fw_stats_request() out of debugfs, by
merging the additional logic into ath12k_mac_get_fw_stats().
Among the added responsibility of ath12k_mac_get_fw_stats() was the
busy-wait for `fw_stats_done`.
Signalling of `fw_stats_done` happens when one of the
WMI_REQUEST_PDEV_STAT, WMI_REQUEST_VDEV_STAT, and WMI_REQUEST_BCN_STAT
messages are received, but the handling of the latter two commands remained
in the debugfs code. As `fw_stats_done` isn't signalled, the calling
processes will spin until the timeout (3 seconds) is reached.
Moving the handling of these two additional responses out of debugfs
resolves the issue.
Fixes: b8a0d83fe4c7 ("wifi: ath12k: move firmware stats out of debugfs")
Signed-off-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
Tested-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://patch.msgid.link/20250609-ath12k-fw-stats-done-v1-1-2b3624656697@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Russell King says:
====================
net: stmmac: visconti: cleanups
A short series of cleanups to the visconti dwmac glue.
====================
Link: https://patch.msgid.link/aFCHJWXSLbUoogi6@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There is little need to have phy_intf_sel as a member of struct
visconti_eth when we have the PHY interface mode available from
phylink in visconti_eth_set_clk_tx_rate(). Without multiple
interface support, phylink is fixed to supporting only
plat->phy_interface, so we can be sure that "interface" passed
into this function is the same as plat->phy_interface.
Make phy_intf_sel local to visconti_eth_init_hw() and clean up.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1uRH2G-004UyY-GD@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Ensure that code is wrapped prior to column 80, and shorten the
needlessly long "clk_sel_val" to just "clk_sel".
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1uRH2B-004UyS-Ch@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Rather than testing dwmac->phy_intf_sel several times for the same
values in this function, group the code together. The only part
which was common was stopping the internal clock before programming
the clock setting.
This further improves the readability of this function.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1uRH26-004UyM-9G@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Re-arrange the speed decode in visconti_eth_set_clk_tx_rate() to be
more readable by first checking to see if we're using RGMII or RMII
and then decoding the speed, rather than decoding the speed and then
testing the interface mode.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1uRH21-004UyG-50@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Justin Lai says:
====================
Link NAPI instances to queues and IRQs
This patch series introduces netdev-genl support to rtase, enabling
user-space applications to query the relationships between IRQs,
queues, and NAPI instances.
====================
Link: https://patch.msgid.link/20250616032226.7318-1-justinlai0215@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Link queues to NAPI instances with netif_queue_set_napi. This
information can be queried with the netdev-genl API.
Signed-off-by: Justin Lai <justinlai0215@realtek.com>
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20250616032226.7318-3-justinlai0215@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Link IRQs to NAPI instances with netif_napi_set_irq. This
information can be queried with the netdev-genl API.
Also add support for persistent NAPI configuration using
netif_napi_add_config().
Signed-off-by: Justin Lai <justinlai0215@realtek.com>
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20250616032226.7318-2-justinlai0215@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch corrects several logging and error message in nettest.c:
- Corrects function name in log messages "setsockopt" -> "getsockopt".
- Closes missing parentheses in "setsockopt(IPV6_FREEBIND)".
- Replaces misleading error text ("Invalid port") with the correct
description ("Invalid prefix length").
- remove Redundant wording like "status from status" and clarifies
context in IPC error messages.
These changes improve readability and aid in debugging test output.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250615084822.1344759-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Neal Cardwell says:
====================
tcp: remove obsolete RFC3517/RFC6675 code
RACK-TLP loss detection has been enabled as the default loss detection
algorithm for Linux TCP since 2018, in:
commit b38a51fec1c1 ("tcp: disable RFC6675 loss detection")
In case users ran into unexpected bugs or performance regressions,
that commit allowed Linux system administrators to revert to using
RFC3517/RFC6675 loss recovery by setting net.ipv4.tcp_recovery to 0.
In the seven years since 2018, our team has not heard reports of
anyone reverting Linux TCP to use RFC3517/RFC6675 loss recovery, and
we can't find any record in web searches of such a revert.
RACK-TLP was published as a standards-track RFC, RFC8985, in February
2021.
Several other major TCP implementations have default-enabled RACK-TLP
at this point as well.
RACK-TLP offers several significant performance advantages over
RFC3517/RFC6675 loss recovery, including much better performance in
the common cases of tail drops, lost retransmissions, and reordering.
It is now time to remove the obsolete and unused RFC3517/RFC6675 loss
recovery code. This will allow a substantial simplification of the
Linux TCP code base, and removes 12 bytes of state in every tcp_sock
for 64-bit machines (8 bytes on 32-bit machines).
To arrange the commits in reasonable sizes, this patch series is split
into 3 commits:
(1) Removes the core RFC3517/RFC6675 logic.
(2) Removes the RFC3517/RFC6675 hint state and the first layer of logic that
updates that state.
(3) Removes the emptied-out tcp_clear_retrans_hints_partial() helper function
and all of its call sites.
====================
Link: https://patch.msgid.link/20250615001435.2390793-1-ncardwell.sw@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Now that we have removed the RFC3517/RFC6675 hints,
tcp_clear_retrans_hints_partial() is empty, and can be removed.
Suggested-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Yuchung Cheng <ycheng@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250615001435.2390793-4-ncardwell.sw@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Now that obsolete RFC3517/RFC6675 TCP loss detection has been removed,
we can remove the somewhat complex and intrusive code to maintain its
hint state: lost_skb_hint and lost_cnt_hint.
This commit makes tcp_clear_retrans_hints_partial() empty. We will
remove tcp_clear_retrans_hints_partial() and its call sites in the
next commit.
Suggested-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Yuchung Cheng <ycheng@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250615001435.2390793-3-ncardwell.sw@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
RACK-TLP loss detection has been enabled as the default loss detection
algorithm for Linux TCP since 2018, in:
commit b38a51fec1c1 ("tcp: disable RFC6675 loss detection")
In case users ran into unexpected bugs or performance regressions,
that commit allowed Linux system administrators to revert to using
RFC3517/RFC6675 loss recovery by setting net.ipv4.tcp_recovery to 0.
In the seven years since 2018, our team has not heard reports of
anyone reverting Linux TCP to use RFC3517/RFC6675 loss recovery, and
we can't find any record in web searches of such a revert.
RACK-TLP was published as a standards-track RFC, RFC8985, in February
2021.
Several other major TCP implementations have default-enabled RACK-TLP
at this point as well.
RACK-TLP offers several significant performance advantages over
RFC3517/RFC6675 loss recovery, including much better performance in
the common cases of tail drops, lost retransmissions, and reordering.
It is now time to remove the obsolete and unused RFC3517/RFC6675 loss
recovery code. This will allow a substantial simplification of the
Linux TCP code base, and removes 12 bytes of state in every tcp_sock
for 64-bit machines (8 bytes on 32-bit machines).
To arrange the commits in reasonable sizes, this patch series is split
into 3 commits. The following 2 commits remove bookkeeping state and
code that is no longer needed after this removal of RFC3517/RFC6675
loss recovery.
Suggested-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Yuchung Cheng <ycheng@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250615001435.2390793-2-ncardwell.sw@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The disable sequence in bcmgenet_phy_power_set() is updated to
match the inverse sequence and timing (and spacing) of the
enable sequence. This ensures that LEDs driven by the GENET IP
are disabled when the GPHY is powered down.
Signed-off-by: Doug Berger <opendmb@gmail.com>
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250614025817.3808354-1-florian.fainelli@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since taprio’s taprio_dev_notifier() isn’t protected by an
RCU read-side critical section, a race with advance_sched()
can lead to a use-after-free.
Adding rcu_read_lock() inside taprio_dev_notifier() prevents this.
Fixes: fed87cc6718a ("net/sched: taprio: automatically calculate queueMaxSDU based on TC gate durations")
Cc: stable@vger.kernel.org
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/aEzIYYxt0is9upYG@v4bel-B760M-AORUS-ELITE-AX
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Vladimir Oltean says:
====================
ptp_vclock fixes
While I was intending to test something else related to PTP in net-next
I noticed any time I would run ptp4l on an interface, the kernel would
print "ptp: physical clock is free running" and ptp4l would exit with an
error code.
I then found Jeongjun Park's patch and subsequent explanation provided
to Jakub's question, specifically related to the code which introduced
the breakage I am seeing.
https://lore.kernel.org/netdev/CAO9qdTEjQ5414un7Yw604paECF=6etVKSDSnYmZzZ6Pg3LurXw@mail.gmail.com/
I had to look at the original issue that prompted Jeongjun Park's patch,
and provide an alternative fix for it. Patch 1/2 in this set contains a
logical revert plus the alternative fix, squashed into one.
Patch 2/2 fixes another issue which was confusing during debugging/
characterization, namely: "ok, the kernel clearly thinks that any
physical clock is free-running after this change (despite there being no
vclocks), but why would ptp4l fail to create the clock altogether? Why
not just fail to adjust it?"
By reverting (locally) Jeongjun Park's commit, I could reproduce
the reported lockdep splat using the commands from patch 1/2's commit
message, and this goes away with the reworked implementation.
====================
Link: https://patch.msgid.link/20250613174749.406826-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
clocks
There is a bug in ptp_clock_adjtime() which makes it refuse the
operation even if we just want to read the current clock dialed
frequency, not modify anything (tx->modes == 0). That should be possible
even if the clock is free-running. For context, the kernel UAPI is the
same for getting and setting the frequency of a POSIX clock.
For example, ptp4l errors out at clock_create() -> clockadj_get_freq()
-> clock_adjtime() time, when it should logically only have failed on
actual adjustments to the clock, aka if the clock was configured as
slave. But in master mode it should work.
This was discovered when examining the issue described in the previous
commit, where ptp_clock_freerun() returned true despite n_vclocks being
zero.
Fixes: 73f37068d540 ("ptp: support ptp physical/virtual clocks conversion")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250613174749.406826-3-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
What is broken
--------------
ptp4l, and any other application which calls clock_adjtime() on a
physical clock, is greeted with error -EBUSY after commit 87f7ce260a3c
("ptp: remove ptp->n_vclocks check logic in ptp_vclock_in_use()").
Explanation for the breakage
----------------------------
The blamed commit was based on the false assumption that
ptp_vclock_in_use() callers already test for n_vclocks prior to calling
this function.
This is notably incorrect for the code path below, in which there is, in
fact, no n_vclocks test:
ptp_clock_adjtime()
-> ptp_clock_freerun()
-> ptp_vclock_in_use()
The result is that any clock adjustment on any physical clock is now
impossible. This is _despite_ there not being any vclock over this
physical clock.
$ ptp4l -i eno0 -2 -P -m
ptp4l[58.425]: selected /dev/ptp0 as PTP clock
[ 58.429749] ptp: physical clock is free running
ptp4l[58.431]: Failed to open /dev/ptp0: Device or resource busy
failed to create a clock
$ cat /sys/class/ptp/ptp0/n_vclocks
0
The patch makes the ptp_vclock_in_use() function say "if it's not a
virtual clock, then this physical clock does have virtual clocks on
top".
Then ptp_clock_freerun() uses this information to say "this physical
clock has virtual clocks on top, so it must stay free-running".
Then ptp_clock_adjtime() uses this information to say "well, if this
physical clock has to be free-running, I can't do it, return -EBUSY".
Simply put, ptp_vclock_in_use() cannot be simplified so as to remove the
test whether vclocks are in use.
What did the blamed commit intend to fix
----------------------------------------
The blamed commit presents a lockdep warning stating "possible recursive
locking detected", with the n_vclocks_store() and ptp_clock_unregister()
functions involved.
The recursive locking seems this:
n_vclocks_store()
-> mutex_lock_interruptible(&ptp->n_vclocks_mux) // 1
-> device_for_each_child_reverse(..., unregister_vclock)
-> unregister_vclock()
-> ptp_vclock_unregister()
-> ptp_clock_unregister()
-> ptp_vclock_in_use()
-> mutex_lock_interruptible(&ptp->n_vclocks_mux) // 2
The issue can be triggered by creating and then deleting vclocks:
$ echo 2 > /sys/class/ptp/ptp0/n_vclocks
$ echo 0 > /sys/class/ptp/ptp0/n_vclocks
But note that in the original stack trace, the address of the first lock
is different from the address of the second lock. This is because at
step 1 marked above, &ptp->n_vclocks_mux is the lock of the parent
(physical) PTP clock, and at step 2, the lock is of the child (virtual)
PTP clock. They are different locks of different devices.
In this situation there is no real deadlock, the lockdep warning is
caused by the fact that the mutexes have the same lock class on both the
parent and the child. Functionally it is fine.
Proposed alternative solution
-----------------------------
We must reintroduce the body of ptp_vclock_in_use() mostly as it was
structured prior to the blamed commit, but avoid the lockdep warning.
Based on the fact that vclocks cannot be nested on top of one another
(ptp_is_attribute_visible() hides n_vclocks for virtual clocks), we
already know that ptp->n_vclocks is zero for a virtual clock. And
ptp->is_virtual_clock is a runtime invariant, established at
ptp_clock_register() time and never changed. There is no need to
serialize on any mutex in order to read ptp->is_virtual_clock, and we
take advantage of that by moving it outside the lock.
Thus, virtual clocks do not need to acquire &ptp->n_vclocks_mux at
all, and step 2 in the code walkthrough above can simply go away.
We can simply return false to the question "ptp_vclock_in_use(a virtual
clock)".
Other notes
-----------
Releasing &ptp->n_vclocks_mux before ptp_vclock_in_use() returns
execution seems racy, because the returned value can become stale as
soon as the function returns and before the return value is used (i.e.
n_vclocks_store() can run any time). The locking requirement should
somehow be transferred to the caller, to ensure a longer life time for
the returned value, but this seems out of scope for this severe bug fix.
Because we are also fixing up the logic from the original commit, there
is another Fixes: tag for that.
Fixes: 87f7ce260a3c ("ptp: remove ptp->n_vclocks check logic in ptp_vclock_in_use()")
Fixes: 73f37068d540 ("ptp: support ptp physical/virtual clocks conversion")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250613174749.406826-2-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
