| Age | Commit message (Collapse) | Author |
|---|
|
Rename variable Bandwidth to bandwidth to avoid CamelCase
which is not accepted by checkpatch.pl .
Signed-off-by: Yogesh Hegde <yogi.kernel@gmail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/20220928180350.GA82748@zephyrus
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The function PHY_RFConfig8188E() is just a wrapper around
phy_RF6052_Config_ParaFile(). Remove the wrapper.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20220928083641.8275-3-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The function PHY_RF6052_Config8188E() is just a wrapper around
phy_RF6052_Config_ParaFile(). Remove the wrapper.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20220928083641.8275-2-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The function ODM_ReadAndConfig_AGC_TAB_1T_8188E() has return type
'enum HAL_STATUS'. Convert the return type to int and use common
kernel error logic. Return 0 on success and negative values on
failure. The enum HAL_STATUS is unused now and we can remove it.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20220928144323.13164-5-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The function ODM_ReadAndConfig_PHY_REG_1T_8188E() has return type
'enum HAL_STATUS'. Convert the return type to int and use common
kernel error logic. Return 0 on success and negative values on
failure. The goal is to get rid of enum HAL_STATUS in the end.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20220928144323.13164-4-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The function ODM_ReadAndConfig_RadioA_1T_8188E() has return type
'enum HAL_STATUS'. Convert the return type to int and use common
kernel error logic. Return 0 on success and negative values on
failure. The goal is to get rid of enum HAL_STATUS in the end.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20220928144323.13164-3-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The function ODM_ReadAndConfig_MAC_REG_8188E() has return type
'enum HAL_STATUS'. Convert the return type to int and use common
kernel error logic. Return 0 on success and negative values on
failure. The goal is to get rid of enum HAL_STATUS in the end.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20220928144323.13164-2-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use skb_put_data() instead of skb_put() and memcpy(), which is shorter
and clear.
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Link: https://lore.kernel.org/r/20220927024220.14044-1-shangxiaojing@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use skb_put_data() instead of skb_put() and memcpy(), which is shorter
and clear. Drop the tmp variable that is not needed any more.
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Link: https://lore.kernel.org/r/20220927024050.13556-1-shangxiaojing@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
All remaining functions in hal/odm_RegConfig8188E.c are only used
in hal/HalHWImg8188E_BB.c. Make them static and remove the now empty
file hal/odm_RegConfig8188E.c and the header odm_RegConfig8188E.h.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20220926173243.8767-4-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The function odm_ConfigRF_RadioA_8188E() is only used in
HalHWImg8188E_RF.c. Make it static.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20220926173243.8767-3-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The function odm_ConfigMAC_8188E() is only used in HalHWImg8188E_MAC.c.
Make it static.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20220926173243.8767-2-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The blink_work function calls either SwLedOff or SwLedOn. These two
functions handle bSurpriseRemoved and bDriverStopped.
There's no need to check bSurpriseRemoved and bDriverStopped again in the
blink worker.
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220925140406.112991-3-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The SwLedOff function calls rtw_read8 which in turn calls usb_read.
bSurpriseRemoved is checked in usb_read. We don't have to check it again
in SwLedOff.
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220925140406.112991-2-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove unused variables that are may just once written but never read
ForcedAMSDUMaxSize, PeerBandwidth, SwBwStep, bIsPeerBcm and
bAcceptAddbaReq to avoid CamelCase which is not accepted by checkpatch.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/0f3e63030511f72dbadc0368fd5e2dbd3ff84e07.1664055213.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Rename variable CurrentMPDUDensity to current_mpdu_density,
ForcedAMPDUFactor to forced_ampdu_factor and ForcedMPDUDensity to
forced_mpdu_density to avoid CamelCase which is not accepted by
checkpatch.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/4fb37ad6dab9addccf99a41a861220840c123e9b.1664055213.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Rename variable SelfMimoPs to self_mimo_ps, CurrentOpMode to
current_op_mode and bForcedShortGI to forced_short_gi to avoid CamelCase
which is not accepted by checkpatch.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/4c59f62a95b9a77711284998b98fbc559b8db813.1664055213.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Rename variable PeerMimoPs to peer_mimo_ps, IOTAction to iot_action and
IOTRaFunc to iot_ra_func to avoid CamelCase which is not accepted by
checkpatch. Added spaces around '&' as proposed by checkpatch.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/2a8ce7bff9a00fe44c057242cedb27ca91219137.1664055213.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Rename variable RxReorderWinSize to rx_reorder_win_size,
RxReorderPendingTime to rx_reorder_pending_time and RxReorderDropCounter
to rx_reorder_drop_counter to avoid CamelCase which is not accepted by
checkpatch.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/e09ef6e2edc88e32782202589a9230204b547a9c.1664055213.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Rename variable szRT2RTAggBuffer to sz_rt2rt_agg_buf, bRegRxReorderEnable
to reg_rx_reorder_enable and bCurRxReorderEnable to cur_rx_reorder_enable
to avoid CamelCase which is not accepted by checkpatch.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/af445e0a80dc8e153a1ba81df99309f19a69d6cb.1664055213.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Rename variable bSwBwInProgress to sw_bw_in_progress, bRegRT2RTAggregation
to reg_rt2rt_aggregation and bCurrentRT2RTAggregation to
current_rt2rt_aggregation to avoid CamelCase which is not accepted by
checkpatch.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/868f9db0e29bd170129f90bdbcc14238a750c440.1664055213.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Rename variable dot11CurrentPreambleMode to dot11_current_preamble_mode,
bCurTxBW40MHz to cur_tx_bw40mhz and bCurrentRT2RTLongSlotTime to
current_rt2rt_long_slot_time to avoid CamelCase which is not accepted
by checkpatch.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/97c4f62da9a98b0ddcdaafae68182e3eb47f9a17.1664055213.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Rename variable eRfSleep to rf_sleep, eRfPowerStateToSet to
rf_power_state_to_set and RfOffReason to rf_off_reason to avoid CamelCase
which is not accepted by checkpatch. Omit the upfront "e" as no RfSleep
and RfPowerStateToSet exist and it makes the variables unnecessary long.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/58e21e5cf86270edae93162db2395e6348c9c424.1664055213.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Rename variable eRFPowerState to rf_power_state, eRfOff to rf_off and
eRfOn to rf_on to avoid CamelCase which is not accepted by checkpatch.
Omit the upfront "e" as no RFPowerState, RfOff and RfOn exist and it
makes the variables unnecessary long.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/52c676bbaf1f894e30971c5c409b4bcb71c8ef7e.1664055213.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In the years since it was added (2012), no one has stepped up to
maintain this properly and get it merged into the kernel tree. So
remove it as it's obviously not being used.
If it is being used, we can easily revert this and take the time to get
it out of the staging tree.
Link: https://lore.kernel.org/r/20220924105817.808385-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix checkpatch warnings for variables: LinkCtrlReg, DeviceID,
RevisionID, IrqLine.
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Signed-off-by: Valentin Vidic <vvidic@valentin-vidic.from.hr>
Link: https://lore.kernel.org/r/20220925123810.2492865-1-vvidic@valentin-vidic.from.hr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Rename: Current_Tx_Rate_Reg to CURRENT_TX_RATE_REG, Initial_Tx_Rate_Reg to
INITIAL_TX_RATE_REG and Tx_Retry_Count_Reg to TX_RETRY_COUNT_REG to avoid
CamelCase which is not accepted by checkpatch.pl.
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Signed-off-by: Dragan Cvetic <dragan.m.cvetic@gmail.com>
Link: https://lore.kernel.org/r/20220924225126.10527-1-dragan.m.cvetic@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Both LED_BLINK_StartToBlink and LED_BLINK_RUNTOP in enum LED_STATE_871x
are not used in the r8188eu driver. Remove them.
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220918175700.215170-7-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We don't have to check bSurpriseRemoved in the SwLedOn function.
SwLedOn calls rtw_read8 which in turn calls usb_read. This function checks
bSurpriseRemoved for us.
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220918175700.215170-6-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Both bLedOn and BlinkingLedState in struct led_priv store the same
information.
The boolean bLedOn stores the curent led state while BlinkingLedState
stores the next led state to be set during blinking, which is the inverse
of the current led state. (The led is either off or blinking, it's never
continuously on.)
This patch removes BlinkingLedState and uses bLedOn instead.
The LED_BLINK_WPS_STOP case in blink_work checked for
pLed->BlinkingLedState != RTW_LED_ON. This is true if the next led
blinking state is ON, i.e. if the led has just been switched off by
blink_work, i.e. if (!pLed->bLedOn).
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220918175700.215170-5-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove the bLedNoLinkBlinkInProgress state variable. Its sole purpose is
to block subsequent requests for "no link" blinking when this blinking
pattern is already active.
It's perfectly safe to restart "no link" blinking. We can remove
bLedNoLinkBlinkInProgress and the many places where it's updated.
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220918175700.215170-4-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Always update the status variables in rtw_led_control when we start
blinking to show that wps was successful. The if statements are not
necessary.
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220918175700.215170-3-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We can always cancel blink_work during wps_stop. The blinking pattern will
be updated to show that wps was successful. Another worker will be started
for this.
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220918175700.215170-2-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The ndo_start_xmit field in net_device_ops is expected to be of type
netdev_tx_t (*ndo_start_xmit)(struct sk_buff *skb, struct net_device *dev).
The mismatched return type breaks forward edge kCFI since the underlying
function definition does not match the function hook definition.
The return type of rtw_xmit_entry should be changed from int to
netdev_tx_t.
Link: https://github.com/ClangBuiltLinux/linux/issues/1703
Cc: llvm@lists.linux.dev
Reported-by: Dan Carpenter <error27@gmail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Link: https://lore.kernel.org/r/20220914211606.423959-1-nhuck@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In _rtw_init_xmit_priv(), there are several error paths for allocation
failures just jump to the `exit` section. However, there is no action
will be performed, so the allocated resources are not properly released,
which leads to various memory leaks.
To properly release them, this patch unifies the error handling code and
several error handling paths are added.
According to the allocation sequence, if the validation fails, it will
jump to its corresponding error tag to release the resources.
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Signed-off-by: Xiaoke Wang <xkernel.wang@foxmail.com>
Link: https://lore.kernel.org/r/tencent_DB57E4F270F4539485C32B05FDAF8394310A@qq.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In rtw_xmit_resource_alloc(), if usb_alloc_urb() fails, then the memory
`pxmitbuf->pallocated_buf` which is allocated by kzalloc() is not properly
released before returning.
So this patch adds kfree() on the above error path to release it in time.
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Reviewed-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Xiaoke Wang <xkernel.wang@foxmail.com>
Link: https://lore.kernel.org/r/tencent_3B46EE3287288555389AD2EC3F388827B306@qq.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The functions _rtw_init_recv_priv(), _rtw_free_recv_priv() and
rtw_recv_entry() are defined in rtw_recv.c. Move their prototypes from
recv_osdep.h to rtw_recv.h.
Move the last two remaining prototypes netdev_open() and netdev_close()
from recv_osdep.h to osdep_intf.h. That is a more appropriate place and
we can remove recv_osdep.h.
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20220911174933.3784-4-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The function prototypes rtw_recv_returnpacket(), rtw_init_recv_priv()
and rtw_free_recv_priv() are not used. Remove them.
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20220911174933.3784-3-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The function _netdev_open() is only used in os_intfs.c.
Make it static.
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20220911174933.3784-2-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In statements spaces should be used not tabs. Replace tabs withs spaces
in two return statements in odm_query_rxpwrpercentage().
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20220911161949.11293-7-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Rename the variable 'AntPower' in odm_query_rxpwrpercentage() to avoid
camel case.
AntPower -> antpower
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20220911161949.11293-6-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Rename odm_QueryRxPwrPercentage() to avoid camel case.
odm_QueryRxPwrPercentage -> odm_query_rxpwrpercentage
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20220911161949.11293-5-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The variable 'retsig' in odm_signal_scale_mapping() is set in the
function before it returns, so it is not needed to initialize it.
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20220911161949.11293-4-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Rename variables in odm_signal_scale_mapping() to avoid camel case.
CurrSig -> currsig
RetSig -> retsig
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20220911161949.11293-3-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Rename odm_SignalScaleMapping() to avoid camel case.
odm_SignalScaleMapping -> odm_signal_scale_mapping
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20220911161949.11293-2-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Always update the status variables in rtw_led_control when we start link
blinking. The if statements are not necessary.
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220911145122.15444-10-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Cancel blink_work before we start link blinking. Another worker will be
scheduled after the state variables are updated.
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220911145122.15444-9-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The blinking code to signal that a link is up has the same big if clause
around it as most other blink events.
Revert this if condition and exit if we're already blinking to show that
the link is up.
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220911145122.15444-8-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Always update the status variables in rtw_led_control when we start tx/rx
blinking. The if statements are not necessary.
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220911145122.15444-7-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Cancel blink_work before we start tx/rx blinking. Another worker will be
scheduled after the state variables are updated.
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220911145122.15444-6-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
