| Age | Commit message (Collapse) | Author |
|---|
|
Active level of the mmc1 cd gpio needs to be low instead of high.
Fix PCM-953 and phyBOARD-WEGA.
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
usb4_tm is unsed on dra72 and accessing the module
with ti,sysc is causing a boot crash hence disable its target
module.
Fixes: 549fce068a3112 ("ARM: dts: dra7: Add l4 interconnect hierarchy and ti-sysc data")
Reported-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
Packets received at the NFP driver may be redirected to egress of another
netdev (e.g. in the case of OvS internal ports). On the egress path, some
processes, like TC egress hooks, may expect the network header offset
field in the skb to be correctly set. If this is not the case there is
potential for abnormal behaviour and even the triggering of BUG() calls.
Set the skb network header field before the mac header pull when doing a
packet redirect.
Fixes: 27f54b582567 ("nfp: allow fallback packets from non-reprs")
Signed-off-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 794200d66273 ("tcp: undo cwnd on Fast Open spurious SYNACK
retransmit") may cause tcp_fastretrans_alert() to warn about pending
retransmission in Open state. This is triggered when the Fast Open
server both sends data and has spurious SYNACK retransmission during
the handshake, and the data packets were lost or reordered.
The root cause is a bit complicated:
(1) Upon receiving SYN-data: a full socket is created with
snd_una = ISN + 1 by tcp_create_openreq_child()
(2) On SYNACK timeout the server/sender enters CA_Loss state.
(3) Upon receiving the final ACK to complete the handshake, sender
does not mark FLAG_SND_UNA_ADVANCED since (1)
Sender then calls tcp_process_loss since state is CA_loss by (2)
(4) tcp_process_loss() does not invoke undo operations but instead
mark REXMIT_LOST to force retransmission
(5) tcp_rcv_synrecv_state_fastopen() calls tcp_try_undo_loss(). It
changes state to CA_Open but has positive tp->retrans_out
(6) Next ACK triggers the WARN_ON in tcp_fastretrans_alert()
The step that goes wrong is (4) where the undo operation should
have been invoked because the ACK successfully acknowledged the
SYN sequence. This fixes that by specifically checking undo
when the SYN-ACK sequence is acknowledged. Then after
tcp_process_loss() the state would be further adjusted based
in tcp_fastretrans_alert() to avoid triggering the warning in (6).
Fixes: 794200d66273 ("tcp: undo cwnd on Fast Open spurious SYNACK retransmit")
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
MPLS routing code relies on sysctl to work, so let it select PROC_SYSCTL.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Suggested-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Thomas Falcon says:
====================
ibmvnic: Fixes for device reset handling
This series contains three unrelated fixes to issues seen during
device resets. The first patch fixes an error when the driver requests
to deactivate the link of an uninitialized device, resulting in a
failure to reset. Next, a patch to fix multicast transmission
failures seen after a driver reset. The final patch fixes mishandling
of memory allocation failures during device initialization, which
caused a kernel oops.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The return values for these memory allocations are unchecked,
which may cause an oops if the driver does not handle them after
a failure. Fix by checking the function's return code.
Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It was observed that multicast packets were no longer received after
a device reset. The fix is to resend the current multicast list to
the backing device after recovery.
Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Check driver state before halting it during a reset. If the driver is
not running, do nothing. Otherwise, a request to deactivate a down link
can cause an error and the reset will fail.
Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
Mellanox, mlx5 fixes 2019-06-07
This series introduces some fixes to mlx5 driver.
Please pull and let me know if there is any problem.
For -stable v4.17
('net/mlx5: Avoid reloading already removed devices')
For -stable v5.0
('net/mlx5e: Avoid detaching non-existing netdev under switchdev mode')
For -stable v5.1
('net/mlx5e: Fix source port matching in fdb peer flow rule')
('net/mlx5e: Support tagged tunnel over bond')
('net/mlx5e: Add ndo_set_feature for uplink representor')
('net/mlx5: Update pci error handler entries and command translation')
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2019-06-07
this is a pull reqeust of 9 patches for net/master.
The first patch is by Alexander Dahl and removes a duplicate menu entry from
the Kconfig. The next patch by Joakim Zhang fixes the timeout in the flexcan
driver when setting small bit rates. Anssi Hannula's patch for the xilinx_can
driver fixes the bittiming_const for CAN FD core. The two patches by Sean
Nyekjaer bring mcp25625 to the existing mcp251x driver. The patch by Eugen
Hristev implements an errata for the m_can driver. YueHaibing's patch fixes the
error handling ing can_init(). The patch by Fabio Estevam for the flexcan
driver removes an unneeded registration message during flexcan_probe(). And the
last patch is by Willem de Bruijn and adds the missing purging the socket
error queue on sock destruct.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If you configure a route with multiple labels, e.g.
ip route add 10.10.3.0/24 encap mpls 16/100 via 10.10.2.2 dev ens4
A warning is logged:
kernel: [ 130.561819] netlink: 'ip': attribute type 1 has an invalid
length.
This happens because mpls_iptunnel_policy has set the type of
MPLS_IPTUNNEL_DST to fixed size NLA_U32.
Change it to a minimum size.
nla_get_labels() does the remaining validation.
Fixes: e3e4712ec096 ("mpls: ip tunnel support")
Signed-off-by: George Wilkie <gwilkie@vyatta.att-mail.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
[Resent to net instead of net-next - may clash with Anders Roxell's patch
series addressing duplicate module names]
Commit 31dd83b96641 ("net-next: phy: new Asix Electronics PHY driver")
introduced a new PHY driver drivers/net/phy/asix.c that causes a module
name conflict with a pre-existiting driver (drivers/net/usb/asix.c).
The PHY driver is used by the X-Surf 100 ethernet card driver, and loaded
by that driver via its PHY ID. A rename of the driver looks unproblematic.
Rename PHY driver to ax88796b.c in order to resolve name conflict.
Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Fixes: 31dd83b96641 ("net-next: phy: new Asix Electronics PHY driver")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Before taking a refcount, make sure the object is not already
scheduled for deletion.
Same fix is needed in ipv6_flowlabel_opt()
Fixes: 18367681a10b ("ipv6 flowlabel: Convert np->ipv6_fl_list to RCU.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
fix an uninitialized variable:
CC net/ipv4/fib_semantics.o
net/ipv4/fib_semantics.c: In function 'fib_check_nh_v4_gw':
net/ipv4/fib_semantics.c:1027:12: warning: 'err' may be used uninitialized in this function [-Wmaybe-uninitialized]
if (!tbl || err) {
^~
Signed-off-by: Enrico Weigelt <info@metux.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Calling input_mt_init_slots() copies ABS_MT_POSITION_X to ABS_X and
so on, but doing so before calling touchscreen_parse_properties()
leaves ABS_X min = max = 0 which may prompt an X server to ignore
the device.
To solve this problem, wait to call input_mt_init_slots() until all
absolute axis information has been resolved (whether that's through
device tree via touchscreen_parse_properties() or from reading from
the device directly).
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
|
|
Pull ceph fixes from Ilya Dryomov:
"A change to call iput() asynchronously to avoid a possible deadlock
when iput_final() needs to wait for in-flight I/O (e.g. readahead) and
a fixup for a cleanup that went into -rc1"
* tag 'ceph-for-5.2-rc4' of git://github.com/ceph/ceph-client:
ceph: fix error handling in ceph_get_caps()
ceph: avoid iput_final() while holding mutex or in dispatch thread
ceph: single workqueue for inode related works
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fix from Juergen Gross:
"Just one fix for the Xen block frontend driver avoiding allocations
with order > 0"
* tag 'for-linus-5.2b-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen-blkfront: switch kcalloc to kvcalloc for large array allocation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Heiko Carstens:
- fix stack unwinder: the stack unwinder rework has on off-by-one bug
which prevents following stack backchains over more than one context
(e.g. irq -> process).
- fix address space detection in exception handler: if user space
switches to access register mode, which is not supported anymore, the
exception handler may resolve to the wrong address space.
* tag 's390-5.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/unwind: correct stack switching during unwind
s390/mm: fix address space detection in exception handling
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Paul Burton:
- Declare ginvt() __always_inline due to its use of an argument as an
inline asm immediate.
- A VDSO build fix following Kbuild changes made this cycle.
- A fix for boot failures on txx9 systems following memory
initialization changes made this cycle.
- Bounds check virt_addr_valid() to prevent it spuriously indicating
that bogus addresses are valid, in turn fixing hardened usercopy
failures that have been present since v4.12.
- Build uImage.gz for pistachio systems by default, since this is the
image we need in order to actually boot on a board.
- Remove an unused variable in our uprobes code.
* tag 'mips_fixes_5.2_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: uprobes: remove set but not used variable 'epc'
MIPS: pistachio: Build uImage.gz by default
MIPS: Make virt_addr_valid() return bool
MIPS: Bounds check virt_addr_valid
MIPS: TXx9: Fix boot crash in free_initmem()
MIPS: remove a space after -I to cope with header search paths for VDSO
MIPS: mark ginvt() as __always_inline
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull yet more SPDX updates from Greg KH:
"Another round of SPDX header file fixes for 5.2-rc4
These are all more "GPL-2.0-or-later" or "GPL-2.0-only" tags being
added, based on the text in the files. We are slowly chipping away at
the 700+ different ways people tried to write the license text. All of
these were reviewed on the spdx mailing list by a number of different
people.
We now have over 60% of the kernel files covered with SPDX tags:
$ ./scripts/spdxcheck.py -v 2>&1 | grep Files
Files checked: 64533
Files with SPDX: 40392
Files with errors: 0
I think the majority of the "easy" fixups are now done, it's now the
start of the longer-tail of crazy variants to wade through"
* tag 'spdx-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (159 commits)
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 450
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 449
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 448
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 446
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 445
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 444
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 443
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 442
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 441
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 440
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 438
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 437
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 436
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 435
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 434
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 433
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 432
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 431
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 430
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 429
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small char and misc driver fixes for 5.2-rc4 to resolve
a number of reported issues.
The most "notable" one here is the kernel headers in proc^Wsysfs
fixes. Those changes move the header file info into sysfs and fixes
the build issues that you reported.
Other than that, a bunch of small habanalabs driver fixes, some fpga
driver fixes, and a few other tiny driver fixes.
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
habanalabs: Read upper bits of trace buffer from RWPHI
habanalabs: Fix virtual address access via debugfs for 2MB pages
fpga: zynqmp-fpga: Correctly handle error pointer
habanalabs: fix bug in checking huge page optimization
habanalabs: Avoid using a non-initialized MMU cache mutex
habanalabs: fix debugfs code
uapi/habanalabs: add opcode for enable/disable device debug mode
habanalabs: halt debug engines on user process close
test_firmware: Use correct snprintf() limit
genwqe: Prevent an integer overflow in the ioctl
parport: Fix mem leak in parport_register_dev_model
fpga: dfl: expand minor range when registering chrdev region
fpga: dfl: Add lockdep classes for pdata->lock
fpga: dfl: afu: Pass the correct device to dma_mapping_error()
fpga: stratix10-soc: fix use-after-free on s10_init()
w1: ds2408: Fix typo after 49695ac46861 (reset on output_write retry with readback)
kheaders: Do not regenerate archive if config is not changed
kheaders: Move from proc to sysfs
lkdtm/bugs: Adjust recursion test to avoid elision
lkdtm/usercopy: Moves the KERNEL_DS test to non-canonical
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"I2C has a driver bugfix and a MAINTAINERS fix"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
MAINTAINERS: Karthikeyan Ramasubramanian is MIA
i2c: xiic: Add max_read_len quirk
|
|
git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine fixes from Vinod Koul:
- jz4780 transfer fix for acking descriptors early
- fsl-qdma: clean registers on error
- dw-axi-dmac: null pointer dereference fix
- mediatek-cqdma: fix sleeping in atomic context
- tegra210-adma: fix bunch os issues like crashing in driver probe,
channel FIFO configuration etc.
- sprd: Fixes for possible crash on descriptor status, block length
overflow. For 2-stage transfer fix incorrect start, configuration and
interrupt handling.
* tag 'dmaengine-fix-5.2-rc4' of git://git.infradead.org/users/vkoul/slave-dma:
dmaengine: sprd: Add interrupt support for 2-stage transfer
dmaengine: sprd: Fix the right place to configure 2-stage transfer
dmaengine: sprd: Fix block length overflow
dmaengine: sprd: Fix the incorrect start for 2-stage destination channels
dmaengine: sprd: Add validation of current descriptor in irq handler
dmaengine: sprd: Fix the possible crash when getting descriptor status
dmaengine: tegra210-adma: Fix spelling
dmaengine: tegra210-adma: Fix channel FIFO configuration
dmaengine: tegra210-adma: Fix crash during probe
dmaengine: mediatek-cqdma: sleeping in atomic context
dmaengine: dw-axi-dmac: fix null dereference when pointer first is null
dmaengine: fsl-qdma: Add improvement
dmaengine: jz4780: Fix transfers being ACKed too soon
|
|
Pull block fixes from Jens Axboe:
- Allow symlink from the bfq.weight cgroup parameter to the general
weight (Angelo)
- Damien is new skd maintainer (Bart)
- NVMe pull request from Sagi, with a few small fixes.
- Ensure we set DMA segment size properly, dma-debug is now tripping on
these (Christoph)
- Remove useless debugfs_create() return check (Greg)
- Remove redundant unlikely() check on IS_ERR() (Kefeng)
- Fixup request freeing on exit (Ming)
* tag 'for-linus-20190608' of git://git.kernel.dk/linux-block:
block, bfq: add weight symlink to the bfq.weight cgroup parameter
cgroup: let a symlink too be created with a cftype file
block: free sched's request pool in blk_cleanup_queue
nvme-rdma: use dynamic dma mapping per command
nvme: Fix u32 overflow in the number of namespace list calculation
mmc: also set max_segment_size in the device
mtip32xx: also set max_segment_size in the device
rsxx: don't call dma_set_max_seg_size
nvme-pci: don't limit DMA segement size
block: Drop unlikely before IS_ERR(_OR_NULL)
block: aoe: no need to check return value of debugfs_create functions
nvmet: fix data_len to 0 for bdev-backed write_zeroes
MAINTAINERS: Hand over skd maintainership
nvme-tcp: fix queue mapping when queue count is limited
nvme-rdma: fix queue mapping when queue count is limited
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two bug fixes, both for fairly serious problems; the UFS one looks
like it could be used to exfiltrate data from the kernel, although
probably only a privileged user has access to the command management
interface and the missing unlock in smartpqi is long standing and
probably a little used error path"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: smartpqi: unlock on error in pqi_submit_raid_request_synchronous()
scsi: ufs: Check that space was properly alloced in copy_query_response
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest fix from Shuah Khan:
"This consists of a single fix for a vm test build failure regression
when it is built by itself"
* tag 'linux-kselftest-5.2-rc4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: vm: Fix test build failure when built by itself
|
|
We have a dedicated pointer for that, so use it. Much easier to read and
less computation involved.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
GPD has done it again, make a nice device (good), use way too generic
DMI strings (bad) and use a portrait screen rotated 90 degrees (ugly).
Because of the too generic DMI strings this entry is also doing bios-date
matching, so the gpd_micropc data struct may very well need to be updated
with some extra bios-dates in the future.
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190524125759.14131-2-hdegoede@redhat.com
(cherry picked from commit f2f2bb60d998abde10de7e483ef9e17639892450)
|
|
GPD has done it again, make a nice device (good), use way too generic
DMI strings (bad) and use a portrait screen rotated 90 degrees (ugly).
Because of the too generic DMI strings this entry is also doing bios-date
matching, so the gpd_pocket2 data struct may very well need to be updated
with some extra bios-dates in the future.
Changes in v2:
-Add one more known BIOS date to the list of BIOS dates
Cc: Jurgen Kramer <gtmkramer@xs4all.nl>
Reported-by: Jurgen Kramer <gtmkramer@xs4all.nl>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190524125759.14131-1-hdegoede@redhat.com
(cherry picked from commit 6dab9102dd7b144e5723915438e0d6c473018cd0)
|
|
This driver uses devm_ioremap and of* functions. This fixes a
linking failure with e.g. ARCH=um.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Patrick Havelange <patrick.havelange@essensium.com>
Fixes: a3b9a99 ("counter: add FlexTimer Module Quadrature decoder counter driver")
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
On x86_64 when GPIOLIB is not set the following build errors
are seen:
drivers/staging/iio/addac/adt7316.c:947:3: error: implicit declaration of function 'gpiod_set_value' [-Werror=implicit-function-declaration]
drivers/staging/iio/addac/adt7316.c:1805:2: error: implicit declaration of function 'irqd_get_trigger_type' [-Werror=implicit-function-declaration]
These functions are provided by the <linux/gpio/consumer.h>
and <linux/irq.h> headers, so include them to fix these
build errors.
While at it, remove <linux/gpio.h> as this driver is a GPIO
consumer and not a GPIO driver.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
In commit
39388e80f9b0c ("x86/fpu: Don't save fxregs for ia32 frames in copy_fpstate_to_sigframe()")
I removed the statement
| if (ia32_fxstate)
| copy_fxregs_to_kernel(fpu);
and argued that it was wrongly merged because the content was already
saved in kernel's state.
This was wrong: It is required to write it back because it is only
saved on the user-stack and save_fsave_header() reads it from task's
FPU-state. I missed that part…
Save x87 FPU state unless thread's FPU registers are already up to date.
Fixes: 39388e80f9b0c ("x86/fpu: Don't save fxregs for ia32 frames in copy_fpstate_to_sigframe()")
Reported-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Eric Biggers <ebiggers@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: "Jason A. Donenfeld" <Jason@zx2c4.com>
Cc: kvm ML <kvm@vger.kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20190607142915.y52mfmgk5lvhll7n@linutronix.de
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus
Felipe writes:
USB: fixes for v5.2-rc4
DWC2 gets a fix for zlp handling which allows DWC2 to pass USBCV MSC
tests.
A memory leak in fusb300 was plugged.
DWC2 also got a fix for wMaxPacketSize handling while acting as host
which fixes a regression with USB Cameras.
Apart from these, the usual set of minor fixes.
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* tag 'fixes-for-v5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb:
usb: gadget: udc: lpc32xx: fix return value check in lpc32xx_udc_probe()
usb: gadget: dwc2: fix zlp handling
usb: dwc2: Set actual frame number for completed ISOC transfer for none DDMA
usb: gadget: udc: lpc32xx: allocate descriptor with GFP_ATOMIC
usb: gadget: fusb300_udc: Fix memory leak of fusb300->ep[i]
usb: phy: mxs: Disable external charger detect in mxs_phy_hw_init()
usb: dwc2: Fix DMA cache alignment issues
usb: dwc2: host: Fix wMaxPacketSize handling (fix webcam regression)
|
|
Pull drm fixes from Dave Airlie:
"A small bit more lively this week but not majorly so. I'm away in
Japan next week for family holiday, so I'll be pretty disconnected,
I've asked Daniel to do fixes for the week while I'm out.
The nouveau firmware changes are a bit large, but they address a big
problem where a whole set of boards don't load with the driver, and
the new firmware fixes that, so I think it's worth trying to land it
now.
core:
- Allow fb changes in async commits (drivers as well)
udmabuf:
- Unmap scatterlist when unmapping udmabuf
nouveau:
- firmware loading fixes for secboot firmware on new GPU revision.
komeda:
- oops, dma mapping and warning fixes
arm-hdlcd:
- clock fixes
- mode validation fix
i915:
- Add a missing Icelake workaround
- GVT - DMA map fault fix and enforcement fixes
amdgpu:
- DCE resume fix
- New raven variation updates"
* tag 'drm-fixes-2019-06-07-1' of git://anongit.freedesktop.org/drm/drm: (33 commits)
drm/nouveau/secboot/gp10[2467]: support newer FW to fix SEC2 failures on some boards
drm/nouveau/secboot: enable loading of versioned LS PMU/SEC2 ACR msgqueue FW
drm/nouveau/secboot: split out FW version-specific LS function pointers
drm/nouveau/secboot: pass max supported FW version to LS load funcs
drm/nouveau/core: support versioned firmware loading
drm/nouveau/core: pass subdev into nvkm_firmware_get, rather than device
drm/komeda: Potential error pointer dereference
drm/komeda: remove set but not used variable 'kcrtc'
drm/amd/amdgpu: add RLC firmware to support raven1 refresh
drm/amd/powerplay: add set_power_profile_mode for raven1_refresh
drm/amdgpu: fix ring test failure issue during s3 in vce 3.0 (V2)
udmabuf: actually unmap the scatterlist
drm/arm/hdlcd: Allow a bit of clock tolerance
drm/arm/hdlcd: Actually validate CRTC modes
drm/arm/mali-dp: Add a loop around the second set CVAL and try 5 times
drm/komeda: fixing of DMA mapping sg segment warning
drm: don't block fb changes for async plane updates
drm/vc4: fix fb references in async update
drm/msm: fix fb references in async update
drm/amd: fix fb references in async update
...
|
|
A mail just bounced back with "user unknown":
550 5.1.1 <kramasub@codeaurora.org> User doesn't exist
I also couldn't find a more recent address in git history. So, remove
this stale entry.
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
|
|
This driver does not support reading more than 255 bytes at once because
the register for storing the number of bytes to read is only 8 bits. Add
a max_read_len quirk to enforce this.
This was found when using this driver with the SFP driver, which was
previously reading all 256 bytes in the SFP EEPROM in one transaction.
This caused a bunch of hard-to-debug errors in the xiic driver since the
driver/logic was treating the number of bytes to read as zero.
Rejecting transactions that aren't supported at least allows the problem
to be diagnosed more easily.
Signed-off-by: Robert Hancock <hancock@sedsystems.ca>
Reviewed-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org
|
|
24 bit expanders use REG_ADDR_AI in combination with register addressing. This
conflicts with regmap which takes this bit as part of the register number,
i.e. a second cache entry is defined for accessed with REG_ADDR_AI being
set although on the chip it is the same register as with REG_ADDR_AI being
cleared.
The problem was introduced by
commit b32cecb46bdc ("gpio: pca953x: Extract the register address mangling to single function")
but only became visible by
commit 8b9f9d4dc511 ("regmap: verify if register is writeable before writing operations")
because before, the regmap size was effectively ignored and
pca953x_writeable_register() did know to ignore REG_ADDR_AI. Still, there
were two separate cache entries created.
Since the use of REG_ADDR_AI seems to be static we can work around this
issue by simply increasing the size of the regmap to cover the "virtual"
registers with REG_ADDR_AI being set. This only means that half of the
regmap buffer will be unused.
Reported-by: H. Nikolaus Schaller <hns@goldelico.com>
Suggested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Daniel Borkmann says:
====================
pull-request: bpf 2019-06-07
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Fix several bugs in riscv64 JIT code emission which forgot to clear high
32-bits for alu32 ops, from Björn and Luke with selftests covering all
relevant BPF alu ops from Björn and Jiong.
2) Two fixes for UDP BPF reuseport that avoid calling the program in case of
__udp6_lib_err and UDP GRO which broke reuseport_select_sock() assumption
that skb->data is pointing to transport header, from Martin.
3) Two fixes for BPF sockmap: a use-after-free from sleep in psock's backlog
workqueue, and a missing restore of sk_write_space when psock gets dropped,
from Jakub and John.
4) Fix unconnected UDP sendmsg hook API which is insufficient as-is since it
breaks standard applications like DNS if reverse NAT is not performed upon
receive, from Daniel.
5) Fix an out-of-bounds read in __bpf_skc_lookup which in case of AF_INET6
fails to verify that the length of the tuple is long enough, from Lorenz.
6) Fix libbpf's libbpf__probe_raw_btf to return an fd instead of 0/1 (for
{un,}successful probe) as that is expected to be propagated as an fd to
load_sk_storage_btf() and thus closing the wrong descriptor otherwise,
from Michal.
7) Fix bpftool's JSON output for the case when a lookup fails, from Krzesimir.
8) Minor misc fixes in docs, samples and selftests, from various others.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Stacked devices like bond interface may have a VLAN device on top of
them. Detect lag state correctly under this condition, and return the
correct routed net device, according to it the encap header is built.
Fixes: e32ee6c78efa ("net/mlx5e: Support tunnel encap over tagged Ethernet")
Signed-off-by: Eli Britstein <elibr@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
After introducing dedicated uplink representor, the netdev instance
set over the esw manager vport (PF) became no longer in use, so it was
removed in the cited commit once we're on switchdev mode.
However, the mlx5e_detach function was not updated accordingly, and it
still tries to detach a non-existing netdev, causing a kernel crash.
This patch fixes this issue.
Fixes: aec002f6f82c ("net/mlx5e: Uninstantiate esw manager vport netdev on switchdev mode")
Signed-off-by: Alaa Hleihel <alaa@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
The cited commit changed the initialization placement of the eswitch
attributes so it is done prior to parse tc actions function call,
including among others the in_rep and in_mdev fields which are mistakenly
reassigned inside the parse actions function.
This breaks the source port matching criteria of the peer redirect rule.
Fix by removing the now redundant reassignment of the already initialized
fields.
Fixes: 988ab9c7363a ("net/mlx5e: Introduce mlx5e_flow_esw_attr_init() helper")
Signed-off-by: Raed Salem <raeds@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
The TX queue index returned by the fallback function ranges
between [0,NUM CHANNELS - 1] if QoS isn't set and
[0, (NUM CHANNELS)*(NUM TCs) -1] otherwise.
Our HW uses different TC mapping than the fallback function
(which is denoted as 'up', user priority) so we only need to extract
a channel number out of the returned value.
Since (NUM CHANNELS)*(NUM TCs) is a relatively small number, using
reciprocal scale almost always returns zero.
We instead access the 'txq2sq' table to extract the sq (and with it the
channel number) associated with the tx queue, thus getting
a more evenly distributed channel number.
Perf:
Rx/Tx side with Intel(R) Xeon(R) Silver 4108 CPU @ 1.80GHz and ConnectX-5.
Used 'iperf' UDP traffic, 10 threads, and priority 5.
Before: 0.566Mpps
After: 2.37Mpps
As expected, releasing the existing bottleneck of steering all traffic
to TX queue zero significantly improves transmission rates.
Fixes: 7ccdd0841b30 ("net/mlx5e: Fix select queue callback")
Signed-off-by: Shay Agroskin <shayag@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
After we have a dedicated uplink representor, the new netdev ops
doesn't support ndo_set_feature. Because of that, we can't change
some features, eg. rxvlan. Now add it back.
In this patch, I also do a cleanup for the features flag handling,
eg. remove duplicate NETIF_F_HW_TC flag setting.
Fixes: aec002f6f82c ("net/mlx5e: Uninstantiate esw manager vport netdev on switchdev mode")
Signed-off-by: Chris Mi <chrism@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Prior to reloading a device we must first verify that it was not already
removed. Otherwise, the attempt to remove the device will do nothing, and
in that case we will end up proceeding with adding an new device that no
one was expecting to remove, leaving behind used resources such as EQs that
causes a failure to destroy comp EQs and syndrome (0x30f433).
Fix that by making sure that we try to remove and add a device (based on a
protocol) only if the device is already added.
Fixes: c5447c70594b ("net/mlx5: E-Switch, Reload IB interface when switching devlink modes")
Signed-off-by: Alaa Hleihel <alaa@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Add missing entries for create/destroy UCTX and UMEM commands.
This could get us wrong "unknown FW command" error in flows
where we unbind the device or reset the driver.
Also the translation of these commands from opcodes to string
was missing.
Fixes: 6e3722baac04 ("IB/mlx5: Use the correct commands for UMEM and UCTX allocation")
Signed-off-by: Edward Srouji <edwards@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
cec_timer_fn() is a timer callback which reads ce_arr.array[] and
updates its decay values. However, it runs in interrupt context and the
mutex protection the CEC uses for that array, is inadequate. Convert the
used timer to a workqueue to keep the tasks the CEC performs preemptible
and thus low-prio.
[ bp: Rewrite commit message.
s/timer/decay/gi to make it agnostic as to what facility is used. ]
Fixes: 011d82611172 ("RAS: Add a Corrected Errors Collector")
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20190416213351.28999-2-xiyou.wangcong@gmail.com
|
|
Switch to using Donald Knuth's binary search algorithm (The Art of
Computer Programming, vol. 3, section 6.2.1). This should've been done
from the very beginning but the author must've been smoking something
very potent at the time.
The problem with the current one was that it would return the wrong
element index in certain situations:
https://lkml.kernel.org/r/CAM_iQpVd02zkVJ846cj-Fg1yUNuz6tY5q1Vpj4LrXmE06dPYYg@mail.gmail.com
and the noodling code after the loop was fishy at best.
So switch to using Knuth's binary search. The final result is much
cleaner and straightforward.
Fixes: 011d82611172 ("RAS: Add a Corrected Errors Collector")
Reported-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: <stable@vger.kernel.org>
|
|
The size of the vmemmap section is hardcoded to 1 TB to support the
maximum amount of system RAM in 4-level paging mode - 64 TB.
However, 1 TB is not enough for vmemmap in 5-level paging mode. Assuming
the size of struct page is 64 Bytes, to support 4 PB system RAM in 5-level,
64 TB of vmemmap area is needed:
4 * 1000^5 PB / 4096 bytes page size * 64 bytes per page struct / 1000^4 TB = 62.5 TB.
This hardcoding may cause vmemmap to corrupt the following
cpu_entry_area section, if KASLR puts vmemmap very close to it and the
actual vmemmap size is bigger than 1 TB.
So calculate the actual size of the vmemmap region needed and then align
it up to 1 TB boundary.
In 4-level paging mode it is always 1 TB. In 5-level it's adjusted on
demand. The current code reserves 0.5 PB for vmemmap on 5-level. With
this change, the space can be saved and thus used to increase entropy
for the randomization.
[ bp: Spell out how the 64 TB needed for vmemmap is computed and massage commit
message. ]
Fixes: eedb92abb9bb ("x86/mm: Make virtual memory layout dynamic for CONFIG_X86_5LEVEL=y")
Signed-off-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Kirill A. Shutemov <kirill@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: kirill.shutemov@linux.intel.com
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable <stable@vger.kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20190523025744.3756-1-bhe@redhat.com
|
