summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-07-28KVM: SEV: Enable data breakpoints in SEV-ESAlexey Kardashevskiy
Add support for "DebugSwap for SEV-ES guests", which provides support for swapping DR[0-3] and DR[0-3]_ADDR_MASK on VMRUN and VMEXIT, i.e. allows KVM to expose debug capabilities to SEV-ES guests. Without DebugSwap support, the CPU doesn't save/load most _guest_ debug registers (except DR6/7), and KVM cannot manually context switch guest DRs due the VMSA being encrypted. Enable DebugSwap if and only if the CPU also supports NoNestedDataBp, which causes the CPU to ignore nested #DBs, i.e. #DBs that occur when vectoring a #DB. Without NoNestedDataBp, a malicious guest can DoS the host by putting the CPU into an infinite loop of vectoring #DBs (see https://bugzilla.redhat.com/show_bug.cgi?id=1278496) Set the features bit in sev_es_sync_vmsa() which is the last point when VMSA is not encrypted yet as sev_(es_)init_vmcb() (where the most init happens) is called not only when VCPU is initialised but also on intrahost migration when VMSA is encrypted. Eliminate DR7 intercepts as KVM can't modify guest DR7, and intercepting DR7 would completely defeat the purpose of enabling DebugSwap. Make X86_FEATURE_DEBUG_SWAP appear in /proc/cpuinfo (by not adding "") to let the operator know if the VM can debug. Signed-off-by: Alexey Kardashevskiy <aik@amd.com> Link: https://lore.kernel.org/r/20230615063757.3039121-7-aik@amd.com Signed-off-by: Sean Christopherson <seanjc@google.com>
2023-07-28KVM: SVM/SEV/SEV-ES: Rework interceptsAlexey Kardashevskiy
Currently SVM setup is done sequentially in init_vmcb() -> sev_init_vmcb() -> sev_es_init_vmcb() and tries keeping SVM/SEV/SEV-ES bits separated. One of the exceptions is DR intercepts which is for SEV-ES before sev_es_init_vmcb() runs. Move the SEV-ES intercept setup to sev_es_init_vmcb(). From now on set_dr_intercepts()/clr_dr_intercepts() handle SVM/SEV only. No functional change intended. Suggested-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Alexey Kardashevskiy <aik@amd.com> Reviewed-by: Santosh Shukla <santosh.shukla@amd.com> Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Link: https://lore.kernel.org/r/20230615063757.3039121-6-aik@amd.com [sean: drop comment about intercepting DR7] Signed-off-by: Sean Christopherson <seanjc@google.com>
2023-07-28KVM: SEV-ES: explicitly disable debugAlexey Kardashevskiy
SVM/SEV enable debug registers intercepts to skip swapping DRs on entering/exiting the guest. When the guest is in control of debug registers (vcpu->guest_debug == 0), there is an optimisation to reduce the number of context switches: intercepts are cleared and the KVM_DEBUGREG_WONT_EXIT flag is set to tell KVM to do swapping on guest enter/exit. The same code also executes for SEV-ES, however it has no effect as - it always takes (vcpu->guest_debug == 0) branch; - KVM_DEBUGREG_WONT_EXIT is set but DR7 intercept is not cleared; - vcpu_enter_guest() writes DRs but VMRUN for SEV-ES swaps them with the values from _encrypted_ VMSA. Be explicit about SEV-ES not supporting debug: - return right away from dr_interception() and skip unnecessary processing; - return an error right away from the KVM_SEV_LAUNCH_UPDATE_VMSA handler if debugging was already enabled. KVM_SET_GUEST_DEBUG are failing already after KVM_SEV_LAUNCH_UPDATE_VMSA is finished due to vcpu->arch.guest_state_protected set to true. Add WARN_ON to kvm_x86::sync_dirty_debug_regs() (saves guest DRs on guest exit) to signify that SEV-ES won't hit that path. Suggested-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Alexey Kardashevskiy <aik@amd.com> Link: https://lore.kernel.org/r/20230615063757.3039121-5-aik@amd.com Signed-off-by: Sean Christopherson <seanjc@google.com>
2023-07-28KVM: SVM: Rewrite sev_es_prepare_switch_to_guest()'s comment about swap typesSean Christopherson
Rewrite the comment(s) in sev_es_prepare_switch_to_guest() to explain the swap types employed by the CPU for SEV-ES guests, i.e. to explain why KVM needs to save a seemingly random subset of host state, and to provide a decoder for the APM's Type-A/B/C terminology. Signed-off-by: Alexey Kardashevskiy <aik@amd.com> Link: https://lore.kernel.org/r/20230615063757.3039121-4-aik@amd.com Signed-off-by: Sean Christopherson <seanjc@google.com>
2023-07-28KVM: SEV: Move SEV's GP_VECTOR intercept setup to SEVAlexey Kardashevskiy
Currently SVM setup is done sequentially in init_vmcb() -> sev_init_vmcb() -> sev_es_init_vmcb() and tries keeping SVM/SEV/SEV-ES bits separated. One of the exceptions is #GP intercept which init_vmcb() skips setting for SEV guests and then sev_es_init_vmcb() needlessly clears it. Remove the SEV check from init_vmcb(). Clear the #GP intercept in sev_init_vmcb(). SEV-ES will use the SEV setting. No functional change intended. Suggested-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Alexey Kardashevskiy <aik@amd.com> Reviewed-by: Carlos Bilbao <carlos.bilbao@amd.com> Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Reviewed-by: Santosh Shukla <santosh.shukla@amd.com> Link: https://lore.kernel.org/r/20230615063757.3039121-3-aik@amd.com Signed-off-by: Sean Christopherson <seanjc@google.com>
2023-07-28KVM: SEV: move set_dr_intercepts/clr_dr_intercepts from the headerAlexey Kardashevskiy
Static functions set_dr_intercepts() and clr_dr_intercepts() are only called from SVM so move them to .c. No functional change intended. Signed-off-by: Alexey Kardashevskiy <aik@amd.com> Reviewed-by: Carlos Bilbao <carlos.bilbao@amd.com> Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Reviewed-by: Santosh Shukla <santosh.shukla@amd.com> Link: https://lore.kernel.org/r/20230615063757.3039121-2-aik@amd.com Signed-off-by: Sean Christopherson <seanjc@google.com>
2023-07-28cxl/memdev: Only show sanitize sysfs files when supportedDavidlohr Bueso
If the device does not support Sanitize or Secure Erase commands, hide the respective sysfs interfaces such that the operation can never be attempted. In order to be generic, keep track of the enabled security commands found in the CEL - the driver does not support Security Passthrough. Signed-off-by: Davidlohr Bueso <dave@stgolabs.net> Link: https://lore.kernel.org/r/20230726051940.3570-4-dave@stgolabs.net Reviewed-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
2023-07-28cxl/memdev: Document security state in kern-docDavidlohr Bueso
... as is the case with all members of struct cxl_memdev_state. Signed-off-by: Davidlohr Bueso <dave@stgolabs.net> Link: https://lore.kernel.org/r/20230726051940.3570-3-dave@stgolabs.net Reviewed-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
2023-07-28cxl/memdev: Improve sanitize ABI descriptionsDavidlohr Bueso
Be more detailed about the CPU cache management situation. The same goes for both sanitize and secure erase. Signed-off-by: Davidlohr Bueso <dave@stgolabs.net> Link: https://lore.kernel.org/r/20230726051940.3570-2-dave@stgolabs.net Reviewed-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
2023-07-28perf test uprobe_from_different_cu: Skip if there is no gccGeorg Müller
Without gcc, the test will fail. On cleanup, ignore probe removal errors. Otherwise, in case of an error adding the probe, the temporary directory is not removed. Fixes: 56cbeacf14353057 ("perf probe: Add test for regression introduced by switch to die_get_decl_file()") Signed-off-by: Georg Müller <georgmueller@gmx.net> Acked-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Georg Müller <georgmueller@gmx.net> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20230728151812.454806-2-georgmueller@gmx.net Link: https://lore.kernel.org/r/CAP-5=fUP6UuLgRty3t2=fQsQi3k4hDMz415vWdp1x88QMvZ8ug@mail.gmail.com/ Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-07-28Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Catalin Marinas: - A couple of SME updates for recent fixes (one of which went to stable): reverting the flushing of the SME hardware state along with the thread flushing and making sure we have the correct vector length before reallocating. - An ACPI/IORT fix to avoid skipping ID mappings whose "number of IDs" is 0 (the spec reports the number of IDs in the mapping range minus 1). * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: ACPI/IORT: Remove erroneous id_count check in iort_node_get_rmr_info() arm64/sme: Set new vector length before reallocating arm64/fpsimd: Don't flush SME register hardware state along with thread
2023-07-28Merge tag 'for-linus-6.5a-rc4-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: - A fix for a performance problem in QubesOS, adding a way to drain the queue of grants experiencing delayed unmaps faster - A patch enabling the use of static event channels from user mode, which was omitted when introducing supporting static event channels - A fix for a problem where Xen related code didn't check properly for running in a Xen environment, resulting in a WARN splat * tag 'for-linus-6.5a-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: speed up grant-table reclaim xen/evtchn: Introduce new IOCTL to bind static evtchn xenbus: check xen_domain in xenbus_probe_initcall
2023-07-28tpm_tis: Explicitly check for error codeAlexander Steffen
recv_data either returns the number of received bytes, or a negative value representing an error code. Adding the return value directly to the total number of received bytes therefore looks a little weird, since it might add a negative error code to a sum of bytes. The following check for size < expected usually makes the function return ETIME in that case, so it does not cause too many problems in practice. But to make the code look cleaner and because the caller might still be interested in the original error code, explicitly check for the presence of an error code and pass that through. Cc: stable@vger.kernel.org Fixes: cb5354253af2 ("[PATCH] tpm: spacing cleanups 2") Signed-off-by: Alexander Steffen <Alexander.Steffen@infineon.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2023-07-28tpm: Switch i2c drivers back to use .probe()Uwe Kleine-König
After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new() call-back type"), all drivers being converted to .probe_new() and then 03c835f498b5 ("i2c: Switch .probe() to not take an id parameter") convert back to (the new) .probe() to be able to eventually drop .probe_new() from struct i2c_driver. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2023-07-28security: keys: perform capable check only on privileged operationsChristian Göttsche
If the current task fails the check for the queried capability via `capable(CAP_SYS_ADMIN)` LSMs like SELinux generate a denial message. Issuing such denial messages unnecessarily can lead to a policy author granting more privileges to a subject than needed to silence them. Reorder CAP_SYS_ADMIN checks after the check whether the operation is actually privileged. Signed-off-by: Christian Göttsche <cgzones@googlemail.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2023-07-28Merge tag 'ceph-for-6.5-rc4' of https://github.com/ceph/ceph-clientLinus Torvalds
Pull ceph fixes from Ilya Dryomov: "A patch to reduce the potential for erroneous RBD exclusive lock blocklisting (fencing) with a couple of prerequisites and a fixup to prevent metrics from being sent to the MDS even just once after that has been disabled by the user. All marked for stable" * tag 'ceph-for-6.5-rc4' of https://github.com/ceph/ceph-client: rbd: retrieve and check lock owner twice before blocklisting rbd: harden get_lock_owner_info() a bit rbd: make get_lock_owner_info() return a single locker or NULL ceph: never send metrics if disable_send_metrics is set
2023-07-28Merge tag '9p-fixes-6.5-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs Pull 9p fixes from Eric Van Hensbergen: "Misc set of fixes for 9p. Most of these clean up warnings we've gotten out of compilation tools, but several of them were from inspection while hunting down a couple of regressions. The most important one is 75b396821cb7 ("fs/9p: remove unnecessary and overrestrictive check") which caused a regression for some folks by restricting mmap in any case where writeback caches weren't enabled. Most of the other bugs caught via inspection were type mismatches" * tag '9p-fixes-6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs: fs/9p: Remove unused extern declaration 9p: remove dead stores (variable set again without being read) 9p: virtio: skip incrementing unused variable 9p: virtio: make sure 'offs' is initialized in zc_request 9p: virtio: fix unlikely null pointer deref in handle_rerror 9p: fix ignored return value in v9fs_dir_release fs/9p: remove unnecessary invalidate_inode_pages2 fs/9p: fix type mismatch in file cache mode helper fs/9p: fix typo in comparison logic for cache mode fs/9p: remove unnecessary and overrestrictive check fs/9p: Fix a datatype used with V9FS_DIRECT_IO
2023-07-28Merge tag 'block-6.5-2023-07-28' of git://git.kernel.dk/linuxLinus Torvalds
Pull block fixes from Jens Axboe: "A few fixes that should go into the current kernel release, mainly: - Set of fixes for dasd (Stefan) - Handle interruptible waits returning because of a signal for ublk (Ming)" * tag 'block-6.5-2023-07-28' of git://git.kernel.dk/linux: ublk: return -EINTR if breaking from waiting for existed users in DEL_DEV ublk: fail to recover device if queue setup is interrupted ublk: fail to start device if queue setup is interrupted block: Fix a source code comment in include/uapi/linux/blkzoned.h s390/dasd: print copy pair message only for the correct error s390/dasd: fix hanging device after request requeue s390/dasd: use correct number of retries for ERP requests s390/dasd: fix hanging device after quiesce/resume
2023-07-28Merge tag 'io_uring-6.5-2023-07-28' of git://git.kernel.dk/linuxLinus Torvalds
Pull io_uring fix from Jens Axboe: "Just a single tweak to a patch from last week, to avoid having idle cqring waits be attributed as iowait" * tag 'io_uring-6.5-2023-07-28' of git://git.kernel.dk/linux: io_uring: gate iowait schedule on having pending requests
2023-07-28Merge tag 'for-linus-iommufd' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd Pull iommufd fixes from Jason Gunthorpe: "Two user triggerable problems: - Syzkaller found a way to trigger a WARN_ON and leak memory by racing destroy with other actions - There is still a bug in the "batch carry" stuff that gets invoked for complex cases with accesses and unmapping of huge pages. The test suite found this (triggers rarely)" * tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd: iommufd: Set end correctly when doing batch carry iommufd: IOMMUFD_DESTROY should not increase the refcount
2023-07-28KVM: arm64: Skip instruction after emulating write to TCR_EL1Oliver Upton
Whelp, this is embarrassing. Since commit 082fdfd13841 ("KVM: arm64: Prevent guests from enabling HA/HD on Ampere1") KVM traps writes to TCR_EL1 on AmpereOne to work around an erratum in the unadvertised HAFDBS implementation, preventing the guest from enabling the feature. Unfortunately, I failed virtualization 101 when working on that change, and forgot to advance PC after instruction emulation. Do the right thing and skip the MSR instruction after emulating the write. Fixes: 082fdfd13841 ("KVM: arm64: Prevent guests from enabling HA/HD on Ampere1") Acked-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20230728000824.3848025-1-oliver.upton@linux.dev Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
2023-07-28Merge tag 'for-6.5/dm-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: - Fix double free on memory allocation failure in DM integrity target's integrity_recalc() - Fix locking in DM raid target's raid_ctr() and around call to md_stop() - Fix DM cache target's cleaner policy to always allow work to be queued for writeback; even if cache isn't idle. * tag 'for-6.5/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm cache policy smq: ensure IO doesn't prevent cleaner policy progress dm raid: protect md_stop() with 'reconfig_mutex' dm raid: clean up four equivalent goto tags in raid_ctr() dm raid: fix missing reconfig_mutex unlock in raid_ctr() error paths dm integrity: fix double free on memory allocation failure
2023-07-28Merge tag 'sound-6.5-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "A collection of device-specific small fixes such as ASoC Realtek codec fixes for PM issues, ASoC nau8821 quirk additions, and usual HD- and USB-audio quirks" * tag 'sound-6.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda/realtek: Support ASUS G713PV laptop ALSA: usb-audio: Update for native DSD support quirks ALSA: usb-audio: Add quirk for Microsoft Modern Wireless Headset ALSA: hda/relatek: Enable Mute LED on HP 250 G8 ASoC: atmel: Fix the 8K sample parameter in I2SC master ASoC: rt711-sdca: fix for JD event handling in ClockStop Mode0 ASoC: rt711: fix for JD event handling in ClockStop Mode0 ASoC: rt722-sdca: fix for JD event handling in ClockStop Mode0 ASoC: rt712-sdca: fix for JD event handling in ClockStop Mode0 ASoc: codecs: ES8316: Fix DMIC config ASoC: rt5682-sdw: fix for JD event handling in ClockStop Mode0 ASoC: wm8904: Fill the cache for WM8904_ADC_TEST_0 register ASoC: nau8821: Add DMI quirk mechanism for active-high jack-detect ASoC: da7219: Check for failure reading AAD IRQ events ASoC: da7219: Flush pending AAD IRQ when suspending ALSA: seq: remove redundant unsigned comparison to zero ASoC: fsl_spdif: Silence output on stop
2023-07-28Merge tag 'drm-fixes-2023-07-28' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "Regular scheduled fixes, msm and amdgpu leading the way, with some i915 and a single misc fbdev, all seems fine. fbdev: - remove unused function amdgpu: - gfxhub partition fix - Fix error handling in psp_sw_init() - SMU13 fix - DCN 3.1 fix - DCN 3.2 fix - Fix for display PHY programming sequence - DP MST error handling fix - GFX 9.4.3 fix amdkfd: - GFX11 trap handling fix i915: - Use shmem for dpt objects - Fix an error handling path in igt_write_huge() msm: - display: - Fix to correct the UBWC programming for decoder version 4.3 seen on SM8550 - Add the missing flush and fetch bits for DMA4 and DMA5 SSPPs. - Fix to drop the unused dpu_core_perf_data_bus_id enum from the code - Drop the unused dsi_phy_14nm_17mA_regulators from QCM 2290 DSI cfg. - gpu: - Fix warn splat for newer devices without revn - Remove name/revn for a690.. we shouldn't be populating these for newer devices, for consistency, but it slipped through review - Fix a6xx gpu snapshot BINDLESS_DATA size (was listed in bytes instead of dwords, causing AHB faults on a6xx gen4/a660-family) - Disallow submit with fence id 0" * tag 'drm-fixes-2023-07-28' of git://anongit.freedesktop.org/drm/drm: (22 commits) drm/msm: Disallow submit with fence id 0 drm/amdgpu: Restore HQD persistent state register drm/amd/display: Unlock on error path in dm_handle_mst_sideband_msg_ready_event() drm/amd/display: Exit idle optimizations before attempt to access PHY drm/amd/display: Don't apply FIFO resync W/A if rdivider = 0 drm/amd/display: Guard DCN31 PHYD32CLK logic against chip family drm/amd/smu: use AverageGfxclkFrequency* to replace previous GFX Curr Clock drm/amd: Fix an error handling mistake in psp_sw_init() drm/amdgpu: Fix infinite loop in gfxhub_v1_2_xcc_gart_enable (v2) drm/amdkfd: fix trap handling work around for debugging drm/fb-helper: Remove unused inline function drm_fb_helper_defio_init() drm/i915: Fix an error handling path in igt_write_huge() drm/i915/dpt: Use shmem for dpt objects drm/msm: Fix hw_fence error path cleanup drm/msm: Fix IS_ERR_OR_NULL() vs NULL check in a5xx_submit_in_rb() drm/msm/adreno: Fix snapshot BINDLESS_DATA size drm/msm/a690: Remove revn and name drm/msm/adreno: Fix warn splat for devices without revn drm/msm/dsi: Drop unused regulators from QCM2290 14nm DSI PHY config drm/msm/dpu: drop enum dpu_core_perf_data_bus_id ...
2023-07-28Merge tag 'cxl-fixes-6.5-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl Pull cxl fixes from Vishal Verma: - Update MAINTAINERS for cxl - A few static analysis fixes - Fix a Kconfig dependency for CONFIG_FW_LOADER * tag 'cxl-fixes-6.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: tools/testing/cxl: Remove unused SZ_512G macro cxl/acpi: Return 'rc' instead of '0' in cxl_parse_cfmws() cxl/acpi: Fix a use-after-free in cxl_parse_cfmws() cxl: Update MAINTAINERS cxl/mem: Fix a double shift bug cxl: fix CONFIG_FW_LOADER dependency
2023-07-28Revert "mm,memblock: reset memblock.reserved to system init state to prevent ↵Mike Rapoport (IBM)
UAF" This reverts commit 9e46e4dcd9d6cd88342b028dbfa5f4fb7483d39c. kbuild reports a warning in memblock_remove_region() because of a false positive caused by partial reset of the memblock state. Doing the full reset will remove the false positives, but will allow late use of memblock_free() to go unnoticed, so it is better to revert the offending commit. WARNING: CPU: 0 PID: 1 at mm/memblock.c:352 memblock_remove_region (kbuild/src/x86_64/mm/memblock.c:352 (discriminator 1)) Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.5.0-rc3-00001-g9e46e4dcd9d6 #2 RIP: 0010:memblock_remove_region (kbuild/src/x86_64/mm/memblock.c:352 (discriminator 1)) Call Trace: memblock_discard (kbuild/src/x86_64/mm/memblock.c:383) page_alloc_init_late (kbuild/src/x86_64/include/linux/find.h:208 kbuild/src/x86_64/include/linux/nodemask.h:266 kbuild/src/x86_64/mm/mm_init.c:2405) kernel_init_freeable (kbuild/src/x86_64/init/main.c:1325 kbuild/src/x86_64/init/main.c:1546) kernel_init (kbuild/src/x86_64/init/main.c:1439) ret_from_fork (kbuild/src/x86_64/arch/x86/kernel/process.c:145) ret_from_fork_asm (kbuild/src/x86_64/arch/x86/entry/entry_64.S:298) Reported-by: kernel test robot <oliver.sang@intel.com> Closes: https://lore.kernel.org/oe-lkp/202307271656.447aa17e-oliver.sang@intel.com Signed-off-by: "Mike Rapoport (IBM)" <rppt@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-07-28mm/mempolicy: Take VMA lock before replacing policyJann Horn
mbind() calls down into vma_replace_policy() without taking the per-VMA locks, replaces the VMA's vma->vm_policy pointer, and frees the old policy. That's bad; a concurrent page fault might still be using the old policy (in vma_alloc_folio()), resulting in use-after-free. Normally this will manifest as a use-after-free read first, but it can result in memory corruption, including because vma_alloc_folio() can call mpol_cond_put() on the freed policy, which conditionally changes the policy's refcount member. This bug is specific to CONFIG_NUMA, but it does also affect non-NUMA systems as long as the kernel was built with CONFIG_NUMA. Signed-off-by: Jann Horn <jannh@google.com> Reviewed-by: Suren Baghdasaryan <surenb@google.com> Fixes: 5e31275cc997 ("mm: add per-VMA lock and helper functions to control it") Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-07-28drm/imx/ipuv3: Fix front porch adjustment upon hactive aligningAlexander Stein
When hactive is not aligned to 8 pixels, it is aligned accordingly and hfront porch needs to be reduced the same amount. Unfortunately the front porch is set to the difference rather than reducing it. There are some Samsung TVs which can't cope with a front porch of instead of 70. Fixes: 94dfec48fca7 ("drm/imx: Add 8 pixel alignment fix") Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Link: https://lore.kernel.org/r/20230515072137.116211-1-alexander.stein@ew.tq-group.com [p.zabel@pengutronix.de: Fixed subject] Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230515072137.116211-1-alexander.stein@ew.tq-group.com
2023-07-28ACPI/IORT: Remove erroneous id_count check in iort_node_get_rmr_info()Guanghui Feng
According to the ARM IORT specifications DEN 0049 issue E, the "Number of IDs" field in the ID mapping format reports the number of IDs in the mapping range minus one. In iort_node_get_rmr_info(), we erroneously skip ID mappings whose "Number of IDs" equal to 0, resulting in valid mapping nodes with a single ID to map being skipped, which is wrong. Fix iort_node_get_rmr_info() by removing the bogus id_count check. Fixes: 491cf4a6735a ("ACPI/IORT: Add support to retrieve IORT RMR reserved regions") Signed-off-by: Guanghui Feng <guanghuifeng@linux.alibaba.com> Cc: <stable@vger.kernel.org> # 6.0.x Acked-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Tested-by: Hanjun Guo <guohanjun@huawei.com> Link: https://lore.kernel.org/r/1689593625-45213-1-git-send-email-guanghuifeng@linux.alibaba.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2023-07-28batman-adv: Do not get eth header before batadv_check_management_packetRemi Pommarel
If received skb in batadv_v_elp_packet_recv or batadv_v_ogm_packet_recv is either cloned or non linearized then its data buffer will be reallocated by batadv_check_management_packet when skb_cow or skb_linearize get called. Thus geting ethernet header address inside skb data buffer before batadv_check_management_packet had any chance to reallocate it could lead to the following kernel panic: Unable to handle kernel paging request at virtual address ffffff8020ab069a Mem abort info: ESR = 0x96000007 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x07: level 3 translation fault Data abort info: ISV = 0, ISS = 0x00000007 CM = 0, WnR = 0 swapper pgtable: 4k pages, 39-bit VAs, pgdp=0000000040f45000 [ffffff8020ab069a] pgd=180000007fffa003, p4d=180000007fffa003, pud=180000007fffa003, pmd=180000007fefe003, pte=0068000020ab0706 Internal error: Oops: 96000007 [#1] SMP Modules linked in: ahci_mvebu libahci_platform libahci dvb_usb_af9035 dvb_usb_dib0700 dib0070 dib7000m dibx000_common ath11k_pci ath10k_pci ath10k_core mwl8k_new nf_nat_sip nf_conntrack_sip xhci_plat_hcd xhci_hcd nf_nat_pptp nf_conntrack_pptp at24 sbsa_gwdt CPU: 1 PID: 16 Comm: ksoftirqd/1 Not tainted 5.15.42-00066-g3242268d425c-dirty #550 Hardware name: A8k (DT) pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : batadv_is_my_mac+0x60/0xc0 lr : batadv_v_ogm_packet_recv+0x98/0x5d0 sp : ffffff8000183820 x29: ffffff8000183820 x28: 0000000000000001 x27: ffffff8014f9af00 x26: 0000000000000000 x25: 0000000000000543 x24: 0000000000000003 x23: ffffff8020ab0580 x22: 0000000000000110 x21: ffffff80168ae880 x20: 0000000000000000 x19: ffffff800b561000 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 00dc098924ae0032 x14: 0f0405433e0054b0 x13: ffffffff00000080 x12: 0000004000000001 x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 x8 : 0000000000000000 x7 : ffffffc076dae000 x6 : ffffff8000183700 x5 : ffffffc00955e698 x4 : ffffff80168ae000 x3 : ffffff80059cf000 x2 : ffffff800b561000 x1 : ffffff8020ab0696 x0 : ffffff80168ae880 Call trace: batadv_is_my_mac+0x60/0xc0 batadv_v_ogm_packet_recv+0x98/0x5d0 batadv_batman_skb_recv+0x1b8/0x244 __netif_receive_skb_core.isra.0+0x440/0xc74 __netif_receive_skb_one_core+0x14/0x20 netif_receive_skb+0x68/0x140 br_pass_frame_up+0x70/0x80 br_handle_frame_finish+0x108/0x284 br_handle_frame+0x190/0x250 __netif_receive_skb_core.isra.0+0x240/0xc74 __netif_receive_skb_list_core+0x6c/0x90 netif_receive_skb_list_internal+0x1f4/0x310 napi_complete_done+0x64/0x1d0 gro_cell_poll+0x7c/0xa0 __napi_poll+0x34/0x174 net_rx_action+0xf8/0x2a0 _stext+0x12c/0x2ac run_ksoftirqd+0x4c/0x7c smpboot_thread_fn+0x120/0x210 kthread+0x140/0x150 ret_from_fork+0x10/0x20 Code: f9403844 eb03009f 54fffee1 f94 Thus ethernet header address should only be fetched after batadv_check_management_packet has been called. Fixes: 0da0035942d4 ("batman-adv: OGMv2 - add basic infrastructure") Cc: stable@vger.kernel.org Signed-off-by: Remi Pommarel <repk@triplefau.lt> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2023-07-28Merge branch kvm-arm64/6.6/generic-vcpu into kvmarm-master/nextMarc Zyngier
* kvm-arm64/6.6/generic-vcpu: : . : Cleanup the obsolete vcpu target abstraction, courtesy of Oliver. : From the cover letter: : : "kvm_vcpu_init::target is quite useless at this point. We don't do any : uarch-specific emulation in the first place, and require userspace : select the 'generic' vCPU target on all but a few implementations. : : Small series to (1) clean up usage of the target value in the kernel and : (2) switch to the 'generic' target on implementations that previously : had their own target values. The implementation-specific values are : still tolerated, though, to avoid UAPI breakage." : . KVM: arm64: Always return generic v8 as the preferred target KVM: arm64: Replace vCPU target with a configuration flag KVM: arm64: Remove pointless check for changed init target KVM: arm64: Delete pointless switch statement in kvm_reset_vcpu() Signed-off-by: Marc Zyngier <maz@kernel.org>
2023-07-28powerpc/ftrace: Create a dummy stackframe to fix stack unwindNaveen N Rao
With ppc64 -mprofile-kernel and ppc32 -pg, profiling instructions to call into ftrace are emitted right at function entry. The instruction sequence used is minimal to reduce overhead. Crucially, a stackframe is not created for the function being traced. This breaks stack unwinding since the function being traced does not have a stackframe for itself. As such, it never shows up in the backtrace: /sys/kernel/debug/tracing # echo 1 > /proc/sys/kernel/stack_tracer_enabled /sys/kernel/debug/tracing # cat stack_trace Depth Size Location (17 entries) ----- ---- -------- 0) 4144 32 ftrace_call+0x4/0x44 1) 4112 432 get_page_from_freelist+0x26c/0x1ad0 2) 3680 496 __alloc_pages+0x290/0x1280 3) 3184 336 __folio_alloc+0x34/0x90 4) 2848 176 vma_alloc_folio+0xd8/0x540 5) 2672 272 __handle_mm_fault+0x700/0x1cc0 6) 2400 208 handle_mm_fault+0xf0/0x3f0 7) 2192 80 ___do_page_fault+0x3e4/0xbe0 8) 2112 160 do_page_fault+0x30/0xc0 9) 1952 256 data_access_common_virt+0x210/0x220 10) 1696 400 0xc00000000f16b100 11) 1296 384 load_elf_binary+0x804/0x1b80 12) 912 208 bprm_execve+0x2d8/0x7e0 13) 704 64 do_execveat_common+0x1d0/0x2f0 14) 640 160 sys_execve+0x54/0x70 15) 480 64 system_call_exception+0x138/0x350 16) 416 416 system_call_common+0x160/0x2c4 Fix this by having ftrace create a dummy stackframe for the function being traced. With this, backtraces now capture the function being traced: /sys/kernel/debug/tracing # cat stack_trace Depth Size Location (17 entries) ----- ---- -------- 0) 3888 32 _raw_spin_trylock+0x8/0x70 1) 3856 576 get_page_from_freelist+0x26c/0x1ad0 2) 3280 64 __alloc_pages+0x290/0x1280 3) 3216 336 __folio_alloc+0x34/0x90 4) 2880 176 vma_alloc_folio+0xd8/0x540 5) 2704 416 __handle_mm_fault+0x700/0x1cc0 6) 2288 96 handle_mm_fault+0xf0/0x3f0 7) 2192 48 ___do_page_fault+0x3e4/0xbe0 8) 2144 192 do_page_fault+0x30/0xc0 9) 1952 608 data_access_common_virt+0x210/0x220 10) 1344 16 0xc0000000334bbb50 11) 1328 416 load_elf_binary+0x804/0x1b80 12) 912 64 bprm_execve+0x2d8/0x7e0 13) 848 176 do_execveat_common+0x1d0/0x2f0 14) 672 192 sys_execve+0x54/0x70 15) 480 64 system_call_exception+0x138/0x350 16) 416 416 system_call_common+0x160/0x2c4 This results in two additional stores in the ftrace entry code, but produces reliable backtraces. Fixes: 153086644fd1 ("powerpc/ftrace: Add support for -mprofile-kernel ftrace ABI") Cc: stable@vger.kernel.org Signed-off-by: Naveen N Rao <naveen@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230621051349.759567-1-naveen@kernel.org
2023-07-28dt-bindings: net: rockchip-dwmac: fix {tx|rx}-delay defaults/range in schemaEugen Hristev
The range and the defaults are specified in the description instead of being specified in the schema. Fix it by adding the default value in the `default` field and specifying the range as `minimum` and `maximum`. Fixes: b331b8ef86f0 ("dt-bindings: net: convert rockchip-dwmac to json-schema") Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-28KVM: arm64: Drop HCR_VIRT_EXCP_MASKZenghui Yu
This was introduced in commit 0369f6a34b9f ("arm64: KVM: EL2 register definitions") and for more than 10 years nobody used. Remove it. Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Reviewed-by: Oliver Upton <oliver.upton@linux.dev> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20230724142257.1551-1-yuzenghui@huawei.com
2023-07-28KVM: arm64: Use the known cpu id instead of smp_processor_id()Shaoqin Huang
In kvm_arch_vcpu_load(), it has the parameter cpu which is the value of smp_processor_id(), so no need to get it again. Simply replace it. Signed-off-by: Shaoqin Huang <shahuang@redhat.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20230727090754.1900310-1-shahuang@redhat.com
2023-07-28media: uvcvideo: Fix menu count handling for userspace XU mappingsLaurent Pinchart
When commit 716c330433e3 ("media: uvcvideo: Use standard names for menus") reworked the handling of menu controls, it inadvertently replaced a GENMASK(n - 1, 0) with a BIT_MASK(n). The latter isn't equivalent to the former, which broke adding XU mappings from userspace. Fix it. Link: https://lore.kernel.org/linux-media/468a36ec-c3ac-cb47-e12f-5906239ae3cd@spahan.ch/ Cc: stable@vger.kernel.org Reported-by: Poncho <poncho@spahan.ch> Fixes: 716c330433e3 ("media: uvcvideo: Use standard names for menus") Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-07-28media: mtk-jpeg: Set platform driver data earlierChen-Yu Tsai
In the multi-core JPEG encoder/decoder setup, the driver for the individual cores references the parent device's platform driver data. However, in the parent driver, this is only set at the end of the probe function, way later than devm_of_platform_populate(), which triggers the probe of the cores. This causes a kernel splat in the sub-device probe function. Move platform_set_drvdata() to before devm_of_platform_populate() to fix this. Fixes: 934e8bccac95 ("mtk-jpegenc: support jpegenc multi-hardware") Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-07-28powerpc/mm/altmap: Fix altmap boundary checkAneesh Kumar K.V
altmap->free includes the entire free space from which altmap blocks can be allocated. So when checking whether the kernel is doing altmap block free, compute the boundary correctly, otherwise memory hotunplug can fail. Fixes: 9ef34630a461 ("powerpc/mm: Fallback to RAM if the altmap is unusable") Signed-off-by: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230724181320.471386-1-aneesh.kumar@linux.ibm.com
2023-07-27Merge tag 'mlx5-fixes-2023-07-26' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5 fixes 2023-07-26 This series provides bug fixes to mlx5 driver. * tag 'mlx5-fixes-2023-07-26' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5: Unregister devlink params in case interface is down net/mlx5: DR, Fix peer domain namespace setting net/mlx5: fs_chains: Fix ft prio if ignore_flow_level is not supported net/mlx5e: kTLS, Fix protection domain in use syndrome when devlink reload net/mlx5: Bridge, set debugfs access right to root-only net/mlx5e: xsk: Fix crash on regular rq reactivation net/mlx5e: xsk: Fix invalid buffer access for legacy rq net/mlx5e: Move representor neigh cleanup to profile cleanup_tx net/mlx5e: Fix crash moving to switchdev mode when ntuple offload is set net/mlx5e: Don't hold encap tbl lock if there is no encap action net/mlx5: Honor user input for migratable port fn attr net/mlx5e: fix return value check in mlx5e_ipsec_remove_trailer() net/mlx5: fix potential memory leak in mlx5e_init_rep_rx net/mlx5: DR, fix memory leak in mlx5dr_cmd_create_reformat_ctx net/mlx5e: fix double free in macsec_fs_tx_create_crypto_table_groups ==================== Link: https://lore.kernel.org/r/20230726213206.47022-1-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-27net: dsa: fix value check in bcm_sf2_sw_probe()Yuanjun Gong
in bcm_sf2_sw_probe(), check the return value of clk_prepare_enable() and return the error code if clk_prepare_enable() returns an unexpected value. Fixes: e9ec5c3bd238 ("net: dsa: bcm_sf2: request and handle clocks") Signed-off-by: Yuanjun Gong <ruc_gongyuanjun@163.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20230726170506.16547-1-ruc_gongyuanjun@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-27net: flower: fix stack-out-of-bounds in fl_set_key_cfm()Eric Dumazet
Typical misuse of nla_parse_nested(array, XXX_MAX, ...); array must be declared as struct nlattr *array[XXX_MAX + 1]; v2: Based on feedbacks from Ido Schimmel and Zahari Doychev, I also changed TCA_FLOWER_KEY_CFM_OPT_MAX and cfm_opt_policy definitions. syzbot reported: BUG: KASAN: stack-out-of-bounds in __nla_validate_parse+0x136/0x2bd0 lib/nlattr.c:588 Write of size 32 at addr ffffc90003a0ee20 by task syz-executor296/5014 CPU: 0 PID: 5014 Comm: syz-executor296 Not tainted 6.5.0-rc2-syzkaller-00307-gd192f5382581 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/12/2023 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1e7/0x2d0 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:364 [inline] print_report+0x163/0x540 mm/kasan/report.c:475 kasan_report+0x175/0x1b0 mm/kasan/report.c:588 kasan_check_range+0x27e/0x290 mm/kasan/generic.c:187 __asan_memset+0x23/0x40 mm/kasan/shadow.c:84 __nla_validate_parse+0x136/0x2bd0 lib/nlattr.c:588 __nla_parse+0x40/0x50 lib/nlattr.c:700 nla_parse_nested include/net/netlink.h:1262 [inline] fl_set_key_cfm+0x1e3/0x440 net/sched/cls_flower.c:1718 fl_set_key+0x2168/0x6620 net/sched/cls_flower.c:1884 fl_tmplt_create+0x1fe/0x510 net/sched/cls_flower.c:2666 tc_chain_tmplt_add net/sched/cls_api.c:2959 [inline] tc_ctl_chain+0x131d/0x1ac0 net/sched/cls_api.c:3068 rtnetlink_rcv_msg+0x82b/0xf50 net/core/rtnetlink.c:6424 netlink_rcv_skb+0x1df/0x430 net/netlink/af_netlink.c:2549 netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline] netlink_unicast+0x7c3/0x990 net/netlink/af_netlink.c:1365 netlink_sendmsg+0xa2a/0xd60 net/netlink/af_netlink.c:1914 sock_sendmsg_nosec net/socket.c:725 [inline] sock_sendmsg net/socket.c:748 [inline] ____sys_sendmsg+0x592/0x890 net/socket.c:2494 ___sys_sendmsg net/socket.c:2548 [inline] __sys_sendmsg+0x2b0/0x3a0 net/socket.c:2577 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f54c6150759 Code: 48 83 c4 28 c3 e8 d7 19 00 00 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffe06c30578 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f54c619902d RCX: 00007f54c6150759 RDX: 0000000000000000 RSI: 0000000020000280 RDI: 0000000000000003 RBP: 00007ffe06c30590 R08: 0000000000000000 R09: 00007ffe06c305f0 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f54c61c35f0 R13: 00007ffe06c30778 R14: 0000000000000001 R15: 0000000000000001 </TASK> The buggy address belongs to stack of task syz-executor296/5014 and is located at offset 32 in frame: fl_set_key_cfm+0x0/0x440 net/sched/cls_flower.c:374 This frame has 1 object: [32, 56) 'nla_cfm_opt' The buggy address belongs to the virtual mapping at [ffffc90003a08000, ffffc90003a11000) created by: copy_process+0x5c8/0x4290 kernel/fork.c:2330 Fixes: 7cfffd5fed3e ("net: flower: add support for matching cfm fields") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Simon Horman <simon.horman@corigine.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Zahari Doychev <zdoychev@maxlinear.com> Link: https://lore.kernel.org/r/20230726145815.943910-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-28LoongArch: Cleanup __builtin_constant_p() checking for cpu_has_*Huacai Chen
In the current configuration, cpu_has_lsx and cpu_has_lasx cannot be constants. So cleanup the __builtin_constant_p() checking to reduce the complexity. Reviewed-by: WANG Xuerui <git@xen0n.name> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-07-28LoongArch: BPF: Fix check condition to call lu32id in move_imm()Tiezhu Yang
As the code comment says, the initial aim is to reduce one instruction in some corner cases, if bit[51:31] is all 0 or all 1, no need to call lu32id. That is to say, it should call lu32id only if bit[51:31] is not all 0 and not all 1. The current code always call lu32id, the result is right but the logic is unexpected and wrong, fix it. Cc: stable@vger.kernel.org # 6.1 Fixes: 5dc615520c4d ("LoongArch: Add BPF JIT support") Reported-by: Colin King (gmail) <colin.i.king@gmail.com> Closes: https://lore.kernel.org/all/bcf97046-e336-712a-ac68-7fd194f2953e@gmail.com/ Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-07-28LoongArch: BPF: Enable bpf_probe_read{, str}() on LoongArchChenguang Zhao
Currently nettrace does not work on LoongArch due to missing bpf_probe_read{,str}() support, with the error message: ERROR: failed to load kprobe-based eBPF ERROR: failed to load kprobe-based bpf According to commit 0ebeea8ca8a4d1d ("bpf: Restrict bpf_probe_read{, str}() only to archs where they work"), we only need to select CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE to add said support, because LoongArch does have non-overlapping address ranges for kernel and userspace. Cc: stable@vger.kernel.org # 6.1 Signed-off-by: Chenguang Zhao <zhaochenguang@kylinos.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-07-28LoongArch: Fix return value underflow in exception pathWANG Rui
This patch fixes an underflow issue in the return value within the exception path, specifically at .Llt8 when the remaining length is less than 8 bytes. Cc: stable@vger.kernel.org Fixes: 8941e93ca590 ("LoongArch: Optimize memory ops (memset/memcpy/memmove)") Reported-by: Weihao Li <liweihao@loongson.cn> Signed-off-by: WANG Rui <wangrui@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-07-28LoongArch: Fix CMDLINE_EXTEND and CMDLINE_BOOTLOADER handlingZhihong Dong
On FDT systems these command line processing are already taken care of by early_init_dt_scan_chosen(). Add similar handling to the ACPI (non- FDT) code path to allow these config options to work for ACPI (non-FDT) systems too. Signed-off-by: Zhihong Dong <donmor3000@hotmail.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-07-28LoongArch: Fix module relocation error with binutils 2.41Huacai Chen
Binutils 2.41 enables linker relaxation by default, but the kernel module loader doesn't support that, so just disable it. Otherwise we get such an error when loading modules: "Unknown relocation type 102" As an alternative, we could add linker relaxation support in the kernel module loader. But it is relatively large complexity that may or may not bring a similar gain, and we don't really want to include this linker pass in the kernel. Reviewed-by: WANG Xuerui <git@xen0n.name> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-07-28LoongArch: Only fiddle with CHECKFLAGS if `need-compiler'Huacai Chen
This is a port of commit 4fe4a6374c4db9ae2b ("MIPS: Only fiddle with CHECKFLAGS if `need-compiler'") to LoongArch. We have originally guarded fiddling with CHECKFLAGS in our arch Makefile by checking for the CONFIG_LOONGARCH variable, not set for targets such as `distclean', etc. that neither include `.config' nor use the compiler. Starting from commit 805b2e1d427aab4 ("kbuild: include Makefile.compiler only when compiler is needed") we have had a generic `need-compiler' variable explicitly telling us if the compiler will be used and thus its capabilities need to be checked and expressed in the form of compilation flags. If this variable is not set, then `make' functions such as `cc-option' are undefined, causing all kinds of weirdness to happen if we expect specific results to be returned. It doesn't cause problems on LoongArch now. But as a guard we replace the check for CONFIG_LOONGARCH with one for `need-compiler' instead, so as to prevent the compiler from being ever called for CHECKFLAGS when not needed. Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-07-28ata: libata-core: fix when to fetch sense data for successful commandsNiklas Cassel
The condition to fetch sense data was supposed to be: ATA_SENSE set AND either 1) Command was NCQ and ATA_DFLAG_CDL_ENABLED flag set (flag ATA_DFLAG_CDL_ENABLED will only be set if the Successful NCQ command sense data supported bit is set); or 2) Command was non-NCQ and regular sense data reporting is enabled. However the check in 2) accidentally had the negation at the wrong place, causing it to try to fetch sense data if it was a non-NCQ command _or_ if regular sense data reporting was _not_ enabled. Fix this by removing the extra parentheses that should not be there, such that only the correct return (ata_is_ncq()) is negated. Fixes: 18bd7718b5c4 ("scsi: ata: libata: Handle completion of CDL commands using policy 0xD") Reported-by: Borislav Petkov <bp@alien8.de> Closes: https://lore.kernel.org/linux-ide/20230722155621.GIZLv8JbURKzHtKvQE@fat_crate.local/ Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Tested-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
2023-07-28Merge tag 'drm-msm-fixes-2023-07-27' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/msm into drm-fixes Fixes for v6.5-rc4 Display: + Fix to correct the UBWC programming for decoder version 4.3 seen on SM8550 + Add the missing flush and fetch bits for DMA4 and DMA5 SSPPs. + Fix to drop the unused dpu_core_perf_data_bus_id enum from the code + Drop the unused dsi_phy_14nm_17mA_regulators from QCM 2290 DSI cfg. GPU: + Fix warn splat for newer devices without revn + Remove name/revn for a690.. we shouldn't be populating these for newer devices, for consistency, but it slipped through review + Fix a6xx gpu snapshot BINDLESS_DATA size (was listed in bytes instead of dwords, causing AHB faults on a6xx gen4/a660-family) + Disallow submit with fence id 0 Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGs9MwCSfiyv8i7yWAsJKYEzCDyzaTx=ujX80Y23rZd9RA@mail.gmail.com
generated by cgit (git 2.34.1) at 2025-09-16 19:40:14 +0000