| Age | Commit message (Collapse) | Author |
|---|
|
https://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 changes for 6.17, take #2
- Correctly handle 'invariant' system registers for protected VMs
- Improved handling of VNCR data aborts, including external aborts
- Fixes for handling of FEAT_RAS for NV guests, providing a sane
fault context during SEA injection and preventing the use of
RASv1p1 fault injection hardware
- Ensure that page table destruction when a VM is destroyed gives an
opportunity to reschedule
- Large fix to KVM's infrastructure for managing guest context loaded
on the CPU, addressing issues where the output of AT emulation
doesn't get reflected to the guest
- Fix AT S12 emulation to actually perform stage-2 translation when
necessary
- Avoid attempting vLPI irqbypass when GICv4 has been explicitly
disabled for a VM
- Minor KVM + selftest fixes
|
|
into HEAD
KVM/riscv fixes for 6.17, take #1
- Fix pte settings within kvm_riscv_gstage_ioremap()
- Fix comments in kvm_riscv_check_vcpu_requests()
- Fix stack overrun when setting vlenb via ONE_REG
|
|
Volodymyr reports that using a Xen DomU as a nested guest (where
HCR_EL2.E2H == 0), ATS12 results in a translation that stops at
the L2's S1, which isn't something you'd normally expects.
Comparing the code against the spec proves to be illuminating,
and suggests that the author of such code must have been tired,
cross-eyed, drunk, or maybe all of the above.
The gist of it is that, apart from HCR_EL2.VM or HCR_EL2.DC being
0, only the use of the EL2&0 translation regime limits the walk
to S1 only, and that we must finish the S2 walk in any other case.
Which solves the above issue, as E2H==0 indicates that ATS12 walks
the EL1&0 translation regime.
Explicitly checking for EL2&0 fixes this.
Reported-by: Volodymyr Babchuk <volodymyr_babchuk@epam.com>
Suggested-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Fixes: be04cebf3e788 ("KVM: arm64: nv: Add emulation of AT S12E{0,1}{R,W}")
Link: https://lore.kernel.org/r/20250806141707.3479194-2-volodymyr_babchuk@epam.com
Link: https://lore.kernel.org/r/20250809144811.2314038-2-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
There is no point having __vcpu_{read,write}_sys_reg_{from,to}_cpu()
exposed to the rest of the kernel, as the only callers are in
sys_regs.c.
Move them where they below, which is another opportunity to
simplify things a bit.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250817121926.217900-5-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Volodymyr reports (again!) that under some circumstances (E2H==0,
walking S1 PTs), PAR_EL1 doesn't report the value of the latest
walk in the CPU register, but that instead the value is written to
the backing store.
Further investigation indicates that the root cause of this is
that a group of registers (PAR_EL1, TPIDR*_EL{0,1}, the *32_EL2 dregs)
should always be considered as "on CPU", as they are not remapped
between EL1 and EL2.
We fail to treat them accordingly, and end-up considering that
the register (PAR_EL1 in this example) should be written to memory
instead of in the register.
While it would be possible to quickly work around it, it is obvious
that the way we track these things at the moment is pretty horrible,
and could do with some improvement.
Revamp the whole thing by:
- defining a location for a register (memory, cpu), potentially
depending on the state of the vcpu
- define a transformation for this register (mapped register, potential
translation, special register needing some particular attention)
- convey this information in a structure that can be easily passed
around
As a result, the accessors themselves become much simpler, as the
state is explicit instead of being driven by hard-to-understand
conventions.
We get rid of the "pure EL2 register" notion, which wasn't very
useful, and add sanitisation of the values by applying the RESx
masks as required, something that was missing so far.
And of course, we add the missing registers to the list, with the
indication that they are always loaded.
Reported-by: Volodymyr Babchuk <volodymyr_babchuk@epam.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Fixes: fedc612314acf ("KVM: arm64: nv: Handle virtual EL2 registers in vcpu_read/write_sys_reg()")
Link: https://lore.kernel.org/r/20250806141707.3479194-3-volodymyr_babchuk@epam.com
Link: https://lore.kernel.org/r/20250817121926.217900-4-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Distinguishing between NV and VHE is slightly pointless, and only
serves as an extra complication, or a way to introduce bugs, such
as the way SPSR_EL1 gets written without checking for the state
being resident.
Get rid if this silly distinction, and fix the bug in one go.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250817121926.217900-3-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Just like c6e35dff58d3 ("KVM: arm64: Check for SYSREGS_ON_CPU before
accessing the CPU state") fixed the 64bit state access, add a check
for the 32bit state actually being on the CPU before writing it.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250817121926.217900-2-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
KVM x86 fixes and a selftest fix for 6.17-rcN
- Use array_index_nospec() to sanitize the target vCPU ID when handling PV
IPIs and yields as the ID is guest-controlled.
- Drop a superfluous cpumask_empty() check when reclaiming SEV memory, as
the common case, by far, is that at least one CPU will have entered the
VM, and wbnoinvd_on_cpus_mask() will naturally handle the rare case where
the set of have_run_cpus is empty.
- Rename the is_signed_type() macro in kselftest_harness.h to is_signed_var()
to fix a collision with linux/overflow.h. The collision generates compiler
warnings due to the two macros having different implementations.
|
|
The userspace load can put up to 2048 bits into an xlen bit stack
buffer. We want only xlen bits, so check the size beforehand.
Fixes: 2fa290372dfe ("RISC-V: KVM: add 'vlenb' Vector CSR")
Cc: stable@vger.kernel.org
Signed-off-by: Radim Krčmář <rkrcmar@ventanamicro.com>
Reviewed-by: Nutty Liu <liujingqi@lanxincomputing.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Link: https://lore.kernel.org/r/20250805104418.196023-4-rkrcmar@ventanamicro.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
Correct `check_vcpu_requests` to `kvm_riscv_check_vcpu_requests` in
comments.
Fixes: f55ffaf89636 ("RISC-V: KVM: Enable ring-based dirty memory tracking")
Signed-off-by: Quan Zhou <zhouquan@iscas.ac.cn>
Reviewed-by: Nutty Liu <nutty.liu@hotmail.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/49680363098c45516ec4b305283d662d26fa9386.1754326285.git.zhouquan@iscas.ac.cn
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
Currently, kvm_riscv_gstage_ioremap() is used to map IMSIC gpa to the
spa of IMSIC guest interrupt file.
The PAGE_KERNEL_IO property includes global setting whereas it does not
include user mode settings, so when accessing the IMSIC address in the
virtual machine, a guest page fault will occur, this is not expected.
According to the RISC-V Privileged Architecture Spec, for G-stage address
translation, all memory accesses are considered to be user-level accesses
as though executed in U-mode.
Fixes: 659ad6d82c31 ("RISC-V: KVM: Use PAGE_KERNEL_IO in kvm_riscv_gstage_ioremap()")
Signed-off-by: Fangyu Yu <fangyu.yu@linux.alibaba.com>
Reviewed-by: Radim Krčmář <rkrcmar@ventanamicro.com>
Reviewed-by: Nutty Liu <nutty.liu@hotmail.com>
Link: https://lore.kernel.org/r/20250807070729.89701-1-fangyu.yu@linux.alibaba.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
- hisi: update maintainership
- fix several issues in rtl9300 xfer:
- check message length boundaries
- correct multi-byte value composition on write
- increase polling timeout
- fix block transfer protocol
* tag 'i2c-for-6.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: rtl9300: Add missing count byte for SMBus Block Ops
i2c: rtl9300: Increase timeout for transfer polling
i2c: rtl9300: Fix multi-byte I2C write
i2c: rtl9300: Fix out-of-bounds bug in rtl9300_i2c_smbus_xfer
MAINTAINERS: i2c: Update i2c_hisi entry
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fix from Borislav Petkov:
- Fix a case where the events throttling logic operates on inactive
events
* tag 'perf_urgent_for_v6.17_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Avoid undefined behavior from stopping/starting inactive events
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Fix the GDS mitigation detection on some machines after the recent
attack vectors conversion
- Filter out the invalid machine reset reason value -1 when running as
a guest as in such cases the reason why the machine was rebooted does
not make a whole lot of sense
- Init the resource control machinery on Hygon hw in order to avoid a
division by zero and to actually enable the feature on hw which
supports it
* tag 'x86_urgent_for_v6.17_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/bugs: Fix GDS mitigation selecting when mitigation is off
x86/CPU/AMD: Ignore invalid reset reason value
x86/cpu/hygon: Add missing resctrl_cpu_detect() in bsp_init helper
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Thomas Bogendoerfer:
"Fix ethernet on Lantiq boards"
* tag 'mips-fixes_6.17_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
mips: lantiq: xway: sysctrl: rename the etop node
mips: dts: lantiq: danube: add missing burst length property
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux
Pull modules fix from Daniel Gomez:
"This includes a fix part of the KSPP (Kernel Self Protection Project)
to replace the deprecated and unsafe strcpy() calls in the kernel
parameter string handler and sysfs parameters for built-in modules.
Single commit, no functional changes"
* tag 'modules-6.17-rc3.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux:
params: Replace deprecated strcpy() with strscpy() and memcpy()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/iio fixes from Greg KH:
"Here are a small number of char/misc/iio and other driver fixes for
6.17-rc3. Included in here are:
- IIO driver bugfixes for reported issues
- bunch of comedi driver fixes
- most core bugfix
- fpga driver bugfix
- cdx driver bugfix
All of these have been in linux-next this week with no reported
issues"
* tag 'char-misc-6.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
most: core: Drop device reference after usage in get_channel()
comedi: Make insn_rw_emulate_bits() do insn->n samples
comedi: Fix use of uninitialized memory in do_insn_ioctl() and do_insnlist_ioctl()
comedi: pcl726: Prevent invalid irq number
cdx: Fix off-by-one error in cdx_rpmsg_probe()
fpga: zynq_fpga: Fix the wrong usage of dma_map_sgtable()
iio: pressure: bmp280: Use IS_ERR() in bmp280_common_probe()
iio: light: as73211: Ensure buffer holes are zeroed
iio: adc: rzg2l_adc: Set driver data before enabling runtime PM
iio: adc: rzg2l: Cleanup suspend/resume path
iio: adc: ad7380: fix missing max_conversion_rate_hz on adaq4381-4
iio: adc: bd79124: Add GPIOLIB dependency
iio: imu: inv_icm42600: change invalid data error to -EBUSY
iio: adc: ad7124: fix channel lookup in syscalib functions
iio: temperature: maxim_thermocouple: use DMA-safe buffer for spi_read()
iio: adc: ad7173: prevent scan if too many setups requested
iio: proximity: isl29501: fix buffered read on big-endian systems
iio: accel: sca3300: fix uninitialized iio scan data
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB driver fixes for 6.17-rc3 to resolve a bunch
of reported issues. Included in here are:
- typec driver fixes
- dwc3 new device id
- dwc3 driver fixes
- new usb-storage driver quirks
- xhci driver fixes
- other tiny USB driver fixes to resolve bugs
All of these have been in linux-next this week with no reported issues"
* tag 'usb-6.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: xhci: fix host not responding after suspend and resume
usb: xhci: Fix slot_id resource race conflict
usb: typec: fusb302: Revert incorrect threaded irq fix
USB: core: Update kerneldoc for usb_hcd_giveback_urb()
usb: typec: maxim_contaminant: re-enable cc toggle if cc is open and port is clean
usb: typec: maxim_contaminant: disable low power mode when reading comparator values
usb: dwc3: Remove WARN_ON for device endpoint command timeouts
USB: storage: Ignore driver CD mode for Realtek multi-mode Wi-Fi dongles
usb: storage: realtek_cr: Use correct byte order for bcs->Residue
usb: chipidea: imx: improve usbmisc_imx7d_pullup()
kcov, usb: Don't disable interrupts in kcov_remote_start_usb_softirq()
usb: dwc3: pci: add support for the Intel Wildcat Lake
usb: dwc3: Ignore late xferNotReady event to prevent halt timeout
USB: storage: Add unusual-devs entry for Novatek NTK96550-based camera
usb: core: hcd: fix accessing unmapped memory in SINGLE_STEP_SET_FEATURE test
usb: renesas-xhci: Fix External ROM access timeouts
usb: gadget: tegra-xudc: fix PM use count underflow
usb: quirks: Add DELAY_INIT quick for another SanDisk 3.2Gen1 Flash Drive
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix rtla and latency tooling pkg-config errors
If libtraceevent and libtracefs is installed, but their corresponding
'.pc' files are not installed, it reports that the libraries are
missing and confuses the developer. Instead, report that the
pkg-config files are missing and should be installed.
- Fix overflow bug of the parser in trace_get_user()
trace_get_user() uses the parsing functions to parse the user space
strings. If the parser fails due to incorrect processing, it doesn't
terminate the buffer with a nul byte. Add a "failed" flag to the
parser that gets set when parsing fails and is used to know if the
buffer is fine to use or not.
- Remove a semicolon that was at an end of a comment line
- Fix register_ftrace_graph() to unregister the pm notifier on error
The register_ftrace_graph() registers a pm notifier but there's an
error path that can exit the function without unregistering it. Since
the function returns an error, it will never be unregistered.
- Allocate and copy ftrace hash for reader of ftrace filter files
When the set_ftrace_filter or set_ftrace_notrace files are open for
read, an iterator is created and sets its hash pointer to the
associated hash that represents filtering or notrace filtering to it.
The issue is that the hash it points to can change while the
iteration is happening. All the locking used to access the tracer's
hashes are released which means those hashes can change or even be
freed. Using the hash pointed to by the iterator can cause UAF bugs
or similar.
Have the read of these files allocate and copy the corresponding
hashes and use that as that will keep them the same while the
iterator is open. This also simplifies the code as opening it for
write already does an allocate and copy, and now that the read is
doing the same, there's no need to check which way it was opened on
the release of the file, and the iterator hash can always be freed.
- Fix function graph to copy args into temp storage
The output of the function graph tracer shows both the entry and the
exit of a function. When the exit is right after the entry, it
combines the two events into one with the output of "function();",
instead of showing:
function() {
}
In order to do this, the iterator descriptor that reads the events
includes storage that saves the entry event while it peaks at the
next event in the ring buffer. The peek can free the entry event so
the iterator must store the information to use it after the peek.
With the addition of function graph tracer recording the args, where
the args are a dynamic array in the entry event, the temp storage
does not save them. This causes the args to be corrupted or even
cause a read of unsafe memory.
Add space to save the args in the temp storage of the iterator.
- Fix race between ftrace_dump and reading trace_pipe
ftrace_dump() is used when a crash occurs where the ftrace buffer
will be printed to the console. But it can also be triggered by
sysrq-z. If a sysrq-z is triggered while a task is reading trace_pipe
it can cause a race in the ftrace_dump() where it checks if the
buffer has content, then it checks if the next event is available,
and then prints the output (regardless if the next event was
available or not). Reading trace_pipe at the same time can cause it
to not be available, and this triggers a WARN_ON in the print. Move
the printing into the check if the next event exists or not
* tag 'trace-v6.17-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ftrace: Also allocate and copy hash for reading of filter files
ftrace: Fix potential warning in trace_printk_seq during ftrace_dump
fgraph: Copy args in intermediate storage with entry
trace/fgraph: Fix the warning caused by missing unregister notifier
ring-buffer: Remove redundant semicolons
tracing: Limit access to parser->buffer when trace_get_user failed
rtla: Check pkg-config install
tools/latency-collector: Check pkg-config install
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core fixes from Danilo Krummrich:
- Fix swapped handling of lru_gen and lru_gen_full debugfs files in
vmscan
- Fix debugfs mount options (uid, gid, mode) being silently ignored
- Fix leak of devres action in the unwind path of Devres::new()
- Documentation:
- Expand and fix documentation of (outdated) Device, DeviceContext
and generic driver infrastructure
- Fix C header link of faux device abstractions
- Clarify expected interaction with the security team
- Smooth text flow in the security bug reporting process
documentation
* tag 'driver-core-6.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core:
Documentation: smooth the text flow in the security bug reporting process
Documentation: clarify the expected collaboration with security bugs reporters
debugfs: fix mount options not being applied
rust: devres: fix leaking call to devm_add_action()
rust: faux: fix C header link
driver: rust: expand documentation for driver infrastructure
device: rust: expand documentation for Device
device: rust: expand documentation for DeviceContext
mm/vmscan: fix inverted polarity in lru_gen_seq_show()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current
i2c-host-fixes for v6.17-rc3
- hisi: update maintainership
- rtl9300: fix several issues in xfer
- check message length boundaries
- correct multi-byte value composition on write
- increase polling timeout
- fix block transfer protocol
|
|
Currently the reader of set_ftrace_filter and set_ftrace_notrace just adds
the pointer to the global tracer hash to its iterator. Unlike the writer
that allocates a copy of the hash, the reader keeps the pointer to the
filter hashes. This is problematic because this pointer is static across
function calls that release the locks that can update the global tracer
hashes. This can cause UAF and similar bugs.
Allocate and copy the hash for reading the filter files like it is done
for the writers. This not only fixes UAF bugs, but also makes the code a
bit simpler as it doesn't have to differentiate when to free the
iterator's hash between writers and readers.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/20250822183606.12962cc3@batman.local.home
Fixes: c20489dad156 ("ftrace: Assign iter->hash to filter or notrace hashes on seq read")
Closes: https://lore.kernel.org/all/20250813023044.2121943-1-wutengda@huaweicloud.com/
Closes: https://lore.kernel.org/all/20250822192437.GA458494@ax162/
Reported-by: Tengda Wu <wutengda@huaweicloud.com>
Tested-by: Tengda Wu <wutengda@huaweicloud.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Pull drm fixes from Dave Airlie:
"Weekly drm fixes. Looks like things did indeed get busier after rc2,
nothing seems too major, but stuff scattered all over the place,
amdgpu, xe, i915, hibmc, rust support code, and other small fixes.
rust:
- drm device memory layout and safety fixes
tests:
- Endianness fixes
gpuvm:
- docs warning fix
panic:
- fix division on 32-bit arm
i915:
- TypeC DP display Fixes
- Silence rpm wakeref asserts on GEN11_GU_MISC_IIR access
- Relocate compression repacking WA for JSL/EHL
xe:
- xe_vm_create fixes
- fix vm bind ioctl double free
amdgpu:
- Replay fixes
- SMU14 fix
- Null check DC fixes
- DCE6 DC fixes
- Misc DC fixes
bridge:
- analogix_dp: devm_drm_bridge_alloc() error handling fix
habanalabs:
- Memory deallocation fix
hibmc:
- modesetting black screen fixes
- fix UAF on irq
- fix leak on i2c failure path
nouveau:
- memory leak fixes
- typos
rockchip:
- Kconfig fix
- register caching fix"
* tag 'drm-fixes-2025-08-23-1' of https://gitlab.freedesktop.org/drm/kernel: (49 commits)
drm/xe: Fix vm_bind_ioctl double free bug
drm/xe: Move ASID allocation and user PT BO tracking into xe_vm_create
drm/xe: Assign ioctl xe file handler to vm in xe_vm_create
drm/i915/gt: Relocate compression repacking WA for JSL/EHL
drm/i915: silence rpm wakeref asserts on GEN11_GU_MISC_IIR access
drm/amd/display: Fix DP audio DTO1 clock source on DCE 6.
drm/amd/display: Fix fractional fb divider in set_pixel_clock_v3
drm/amd/display: Don't print errors for nonexistent connectors
drm/amd/display: Don't warn when missing DCE encoder caps
drm/amd/display: Fill display clock and vblank time in dce110_fill_display_configs
drm/amd/display: Find first CRTC and its line time in dce110_fill_display_configs
drm/amd/display: Adjust DCE 8-10 clock, don't overclock by 15%
drm/amd/display: Don't overclock DCE 6 by 15%
drm/amd/display: Add null pointer check in mod_hdcp_hdcp1_create_session()
drm/amd/display: Fix Xorg desktop unresponsive on Replay panel
drm/amd/display: Avoid a NULL pointer dereference
drm/amdgpu/swm14: Update power limit logic
drm/amd/display: Revert Add HPO encoder support to Replay
drm/i915/icl+/tc: Convert AUX powered WARN to a debug message
drm/i915/lnl+/tc: Use the cached max lane count value
...
|
|
When calling ftrace_dump_one() concurrently with reading trace_pipe,
a WARN_ON_ONCE() in trace_printk_seq() can be triggered due to a race
condition.
The issue occurs because:
CPU0 (ftrace_dump) CPU1 (reader)
echo z > /proc/sysrq-trigger
!trace_empty(&iter)
trace_iterator_reset(&iter) <- len = size = 0
cat /sys/kernel/tracing/trace_pipe
trace_find_next_entry_inc(&iter)
__find_next_entry
ring_buffer_empty_cpu <- all empty
return NULL
trace_printk_seq(&iter.seq)
WARN_ON_ONCE(s->seq.len >= s->seq.size)
In the context between trace_empty() and trace_find_next_entry_inc()
during ftrace_dump, the ring buffer data was consumed by other readers.
This caused trace_find_next_entry_inc to return NULL, failing to populate
`iter.seq`. At this point, due to the prior trace_iterator_reset, both
`iter.seq.len` and `iter.seq.size` were set to 0. Since they are equal,
the WARN_ON_ONCE condition is triggered.
Move the trace_printk_seq() into the if block that checks to make sure the
return value of trace_find_next_entry_inc() is non-NULL in
ftrace_dump_one(), ensuring the 'iter.seq' is properly populated before
subsequent operations.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Ingo Molnar <mingo@elte.hu>
Link: https://lore.kernel.org/20250822033343.3000289-1-wutengda@huaweicloud.com
Fixes: d769041f8653 ("ring_buffer: implement new locking")
Signed-off-by: Tengda Wu <wutengda@huaweicloud.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The output of the function graph tracer has two ways to display its
entries. One way for leaf functions with no events recorded within them,
and the other is for functions with events recorded inside it. As function
graph has an entry and exit event, to simplify the output of leaf
functions it combines the two, where as non leaf functions are separate:
2) | invoke_rcu_core() {
2) | raise_softirq() {
2) 0.391 us | __raise_softirq_irqoff();
2) 1.191 us | }
2) 2.086 us | }
The __raise_softirq_irqoff() function above is really two events that were
merged into one. Otherwise it would have looked like:
2) | invoke_rcu_core() {
2) | raise_softirq() {
2) | __raise_softirq_irqoff() {
2) 0.391 us | }
2) 1.191 us | }
2) 2.086 us | }
In order to do this merge, the reading of the trace output file needs to
look at the next event before printing. But since the pointer to the event
is on the ring buffer, it needs to save the entry event before it looks at
the next event as the next event goes out of focus as soon as a new event
is read from the ring buffer. After it reads the next event, it will print
the entry event with either the '{' (non leaf) or ';' and timestamps (leaf).
The iterator used to read the trace file has storage for this event. The
problem happens when the function graph tracer has arguments attached to
the entry event as the entry now has a variable length "args" field. This
field only gets set when funcargs option is used. But the args are not
recorded in this temp data and garbage could be printed. The entry field
is copied via:
data->ent = *curr;
Where "curr" is the entry field. But this method only saves the non
variable length fields from the structure.
Add a helper structure to the iterator data that adds the max args size to
the data storage in the iterator. Then simply copy the entire entry into
this storage (with size protection).
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/20250820195522.51d4a268@gandalf.local.home
Reported-by: Sasha Levin <sashal@kernel.org>
Tested-by: Sasha Levin <sashal@kernel.org>
Closes: https://lore.kernel.org/all/aJaxRVKverIjF4a6@lappy/
Fixes: ff5c9c576e75 ("ftrace: Add support for function argument to graph tracer")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
- xe_vm_create fixes (Piotr)
- Fix vm_bind_ioctl double free (Christoph)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/aKdxiw9hvO6mcyKs@intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd fixes from Jason Gunthorpe:
"Two very minor fixes:
- Fix mismatched kvalloc()/kfree()
- Spelling fixes in documentation"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommufd: Fix spelling errors in iommufd.rst
iommufd: viommu: free memory allocated by kvcalloc() using kvfree()
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
A bunch of fixes for 6.17:
- analogix_dp: devm_drm_bridge_alloc() error handling fix
- gaudi: Memory deallocation fix
- gpuvm: Documentation warning fix
- hibmc: Various misc fixes
- nouveau: Memory leak fixes, typos
- panic: u64 division handling on 32 bits architecture fix
- rockchip: Kconfig fix, register caching fix
- rust: memory layout and safety fixes
- tests: Endianness fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://lore.kernel.org/r/20250821-economic-dandelion-rooster-c57fa9@houat
|
|
Bindig requires a node name matching ‘^ethernet@[0-9a-f]+$’. This patch
changes the clock name from “etop” to “ethernet”.
This fixes the following warning:
arch/mips/boot/dts/lantiq/danube_easy50712.dtb: etop@e180000 (lantiq,etop-xway): $nodename:0: 'etop@e180000' does not match '^ethernet@[0-9a-f]+$'
from schema $id: http://devicetree.org/schemas/net/lantiq,etop-xway.yaml#
Fixes: dac0bad93741 ("dt-bindings: net: lantiq,etop-xway: Document Lantiq Xway ETOP bindings")
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Acked-by: Jakub Kicinski <kuba@kernel.org>
|
|
The upstream dts lacks the lantiq,{rx/tx}-burst-length property. Other
issues were also fixed:
arch/mips/boot/dts/lantiq/danube_easy50712.dtb: etop@e180000 (lantiq,etop-xway): 'interrupt-names' is a required property
from schema $id: http://devicetree.org/schemas/net/lantiq,etop-xway.yaml#
arch/mips/boot/dts/lantiq/danube_easy50712.dtb: etop@e180000 (lantiq,etop-xway): 'lantiq,tx-burst-length' is a required property
from schema $id: http://devicetree.org/schemas/net/lantiq,etop-xway.yaml#
arch/mips/boot/dts/lantiq/danube_easy50712.dtb: etop@e180000 (lantiq,etop-xway): 'lantiq,rx-burst-length' is a required property
from schema $id: http://devicetree.org/schemas/net/lantiq,etop-xway.yaml#
Fixes: 14d4e308e0aa ("net: lantiq: configure the burst length in ethernet drivers")
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Acked-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Alexander Gordeev:
- When kernel lockdown is active userspace tools that rely on read
operations only are unnecessarily blocked. Fix that by avoiding ioctl
registration during lockdown
- Invalid NULL pointer accesses succeed due to the lowcore is always
mapped the identity mapping pinned to zero. To fix that never map the
first two pages of physical memory with identity mapping
- Fix invalid SCCB present check in the SCLP interrupt handler
- Update defconfigs
* tag 's390-6.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/hypfs: Enable limited access during lockdown
s390/hypfs: Avoid unnecessary ioctl registration in debugfs
s390/mm: Do not map lowcore with identity mapping
s390/sclp: Fix SCCB present check
s390/configs: Set HZ=1000
s390/configs: Update defconfigs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"Two small cleanups which are both relevant only when running as a Xen
guest"
* tag 'for-linus-6.17-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
drivers/xen/xenbus: remove quirk for Xen 3.x
compiler: remove __ADDRESSABLE_ASM{_STR,}() again
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
- amd/hsmp:
- Ensure sock->metric_tbl_addr is non-NULL
- Register driver even if hwmon registration fails
- amd/pmc: Drop SMU F/W match for Cezanne
- dell-smbios-wmi: Separate "priority" from WMI device ID
- hp-wmi: mark Victus 16-r1xxx for Victus s fan and thermal profile
support
- intel-uncore-freq: Check write blocked for efficiency latency control
* tag 'platform-drivers-x86-v6.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: hp-wmi: mark Victus 16-r1xxx for victus_s fan and thermal profile support
platform/x86/amd/hsmp: Ensure success even if hwmon registration fails
platform/x86/amd/hsmp: Ensure sock->metric_tbl_addr is non-NULL
platform/x86/intel-uncore-freq: Check write blocked for ELC
platform/x86/amd: pmc: Drop SMU F/W match for Cezanne
platform/x86: dell-smbios-wmi: Stop touching WMI device ID
|
|
Pull block fixes from Jens Axboe:
"A set of fixes for block that should go into this tree. A bit larger
than what I usually have at this point in time, a lot of that is the
continued fixing of the lockdep annotation for queue freezing that we
recently added, which has highlighted a number of little issues here
and there. This contains:
- MD pull request via Yu:
- Add a legacy_async_del_gendisk mode, to prevent a user tools
regression. New user tools releases will not use such a mode,
the old release with a new kernel now will have warning about
deprecated behavior, and we prepare to remove this legacy mode
after about a year later
- The rename in kernel causing user tools build failure, revert
the rename in mdp_superblock_s
- Fix a regression that interrupted resync can be shown as
recover from mdstat or sysfs
- Improve file size detection for loop, particularly for networked
file systems, by using getattr to get the size rather than the
cached inode size.
- Hotplug CPU lock vs queue freeze fix
- Lockdep fix while updating the number of hardware queues
- Fix stacking for PI devices
- Silence bio_check_eod() for the known case of device removal where
the size is truncated to 0 sectors"
* tag 'block-6.17-20250822' of git://git.kernel.dk/linux:
block: avoid cpu_hotplug_lock depedency on freeze_lock
block: decrement block_rq_qos static key in rq_qos_del()
block: skip q->rq_qos check in rq_qos_done_bio()
blk-mq: fix lockdep warning in __blk_mq_update_nr_hw_queues
block: tone down bio_check_eod
loop: use vfs_getattr_nosec for accurate file size
loop: Consolidate size calculation logic into lo_calculate_size()
block: remove newlines from the warnings in blk_validate_integrity_limits
block: handle pi_tuple_size in queue_limits_stack_integrity
selftests: ublk: Use ARRAY_SIZE() macro to improve code
md: fix sync_action incorrect display during resync
md: add helper rdev_needs_recovery()
md: keep recovery_cp in mdp_superblock_s
md: add legacy_async_del_gendisk mode
|
|
Pull io_uring fixes from Jens Axboe:
"Just two small fixes - one that fixes inconsistent ->async_data vs
REQ_F_ASYNC_DATA handling in futex, and a followup that just ensures
that if other opcode handlers mess this up, it won't cause any issues"
* tag 'io_uring-6.17-20250822' of git://git.kernel.dk/linux:
io_uring: clear ->async_data as part of normal init
io_uring/futex: ensure io_futex_wait() cleans up properly on failure
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"All fixes in drivers. The largest diffstat in ufs is caused by the doc
update with the next being the qcom null pointer deref fix"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: ufs-qcom: Fix ESI null pointer dereference
scsi: ufs: core: Rename ufshcd_wait_for_doorbell_clr()
scsi: ufs: core: Fix the return value documentation
scsi: ufs: core: Remove WARN_ON_ONCE() call from ufshcd_uic_cmd_compl()
scsi: ufs: core: Fix IRQ lock inversion for the SCSI host lock
scsi: qla4xxx: Prevent a potential error pointer dereference
scsi: ufs: ufs-pci: Add support for Intel Wildcat Lake
scsi: fnic: Remove a useless struct mempool forward declaration
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"MMC host:
- sdhci_am654: Disable HS400 for AM62P SR1.0 and SR1.1
- sdhci-of-arasan: Ensure CD logic stabilization before power-up
- sdhci-pci-gli: Mask the replay timer timeout of AER for GL9763e
MEMSTICK:
- Fix deadlock by moving removing flag earlier"
* tag 'mmc-v6.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci_am654: Disable HS400 for AM62P SR1.0 and SR1.1
memstick: Fix deadlock by moving removing flag earlier
mmc: sdhci-of-arasan: Ensure CD logic stabilization before power-up
mmc: sdhci-pci-gli: GL9763e: Mask the replay timer timeout of AER
mmc: sdhci-pci-gli: GL9763e: Rename the gli_set_gl9763e() for consistency
mmc: sdhci-pci-gli: Add a new function to simplify the code
|
|
Pull rdma fixes from Jason Gunthorpe:
- syzkaller found a WARN_ON in rxe due to poor lifecycle management of
resources linked to skbs
- Missing error path handling in erdma qp creation
- Initialize the qp number for the GSI QP in erdma
- Mismatching of DIP, SCC and QP numbers in hns
- SRQ bug fixes in bnxt_re
- Memory leak and possibly uninited memory in bnxt_re
- Remove retired irdma maintainer
- Fix kfree() for kvalloc() in ODP
- Fix memory leak in hns
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/hns: Fix dip entries leak on devices newer than hip09
RDMA/core: Free pfn_list with appropriate kvfree call
MAINTAINERS: Remove bouncing irdma maintainer
RDMA/bnxt_re: Fix to initialize the PBL array
RDMA/bnxt_re: Fix a possible memory leak in the driver
RDMA/bnxt_re: Fix to remove workload check in SRQ limit path
RDMA/bnxt_re: Fix to do SRQ armena by default
RDMA/hns: Fix querying wrong SCC context for DIP algorithm
RDMA/erdma: Fix unset QPN of GSI QP
RDMA/erdma: Fix ignored return value of init_kernel_qp
RDMA/rxe: Flush delayed SKBs while releasing RXE resources
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu fixes from Joerg Roedel:
- AMD-Vi: Fix potential stack buffer overflow via command line
- NVidia-Tegra: Fix endianess sparse warning
- ARM-SMMU: Fix ATS-masters reference count issue
- Virtio-IOMMU: Fix race condition on instance lookup
- RISC-V IOMMU: Fix potential NULL-ptr dereference in
riscv_iommu_iova_to_phys()
* tag 'iommu-fixes-v6.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
iommu/riscv: prevent NULL deref in iova_to_phys
iommu/virtio: Make instance lookup robust
iommu/arm-smmu-v3: Fix smmu_domain->nr_ats_masters decrement
iommu/tegra241-cmdqv: Fix missing cpu_to_le64 at lvcmdq_err_map
iommu/amd: Avoid stack buffer overflow from kernel cmdline
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Only small fixes.
- ASoC Cirrus codec fixes
- A regression fix for the recent TAS2781 codec refactoring
- A fix for user-timer error handling
- Fixes for USB-audio descriptor validators
- Usual HD-audio and ASoC device-specific quirks"
* tag 'sound-6.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: usb-audio: Use correct sub-type for UAC3 feature unit validation
ALSA: timer: fix ida_free call while not allocated
ASoC: cs35l56: Remove SoundWire Clock Divider workaround for CS35L63
ASoC: cs35l56: Handle new algorithms IDs for CS35L63
ASoC: cs35l56: Update Firmware Addresses for CS35L63 for production silicon
ALSA: hda: tas2781: Fix wrong reference of tasdevice_priv
ALSA: hda/realtek: Audio disappears on HP 15-fc000 after warm boot again
ALSA: hda/realtek: Fix headset mic on ASUS Zenbook 14
ASoC: codecs: ES9389: Modify the standby configuration
ALSA: usb-audio: Fix size validation in convert_chmap_v3()
ALSA: hda/tas2781: Add name prefix tas2781 for tas2781's dvc_tlv and amp_vol_tlv
ALSA: hda/realtek: Add support for HP EliteBook x360 830 G6 and EliteBook 830 G6
|
|
Pull smb client fix from Steve French:
"Fix for netfs smb3 oops"
* tag '6.17-rc2-smb3-client-fix' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Fix oops due to uninitialised variable
|
|
Pull NFS client fix from Trond Myklebust:
- NFS: Fix a data corrupting race when updating an existing write
* tag 'nfs-for-6.17-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFS: Fix a race when updating an existing write
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"20 hotfixes. 10 are cc:stable and the remainder address post-6.16
issues or aren't considered necessary for -stable kernels. 17 of these
fixes are for MM.
As usual, singletons all over the place, apart from a three-patch
series of KHO followup work from Pasha which is actually also a bunch
of singletons"
* tag 'mm-hotfixes-stable-2025-08-21-18-17' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/mremap: fix WARN with uffd that has remap events disabled
mm/damon/sysfs-schemes: put damos dests dir after removing its files
mm/migrate: fix NULL movable_ops if CONFIG_ZSMALLOC=m
mm/damon/core: fix damos_commit_filter not changing allow
mm/memory-failure: fix infinite UCE for VM_PFNMAP pfn
MAINTAINERS: mark MGLRU as maintained
mm: rust: add page.rs to MEMORY MANAGEMENT - RUST
iov_iter: iterate_folioq: fix handling of offset >= folio size
selftests/damon: fix selftests by installing drgn related script
.mailmap: add entry for Easwar Hariharan
selftests/mm: add test for invalid multi VMA operations
mm/mremap: catch invalid multi VMA moves earlier
mm/mremap: allow multi-VMA move when filesystem uses thp_get_unmapped_area
mm/damon/core: fix commit_ops_filters by using correct nth function
tools/testing: add linux/args.h header and fix radix, VMA tests
mm/debug_vm_pgtable: clear page table entries at destroy_args()
squashfs: fix memory leak in squashfs_fill_super
kho: warn if KHO is disabled due to an error
kho: mm: don't allow deferred struct page with KHO
kho: init new_physxa->phys_bits to fix lockdep
|
|
The riscv_iommu_pte_fetch() function returns either NULL for
unmapped/never-mapped iova, or a valid leaf pte pointer that
requires no further validation.
riscv_iommu_iova_to_phys() failed to handle NULL returns.
Prevent null pointer dereference in
riscv_iommu_iova_to_phys(), and remove the pte validation.
Fixes: 488ffbf18171 ("iommu/riscv: Paging domain support")
Cc: Tomasz Jeznach <tjeznach@rivosinc.com>
Signed-off-by: XianLiang Huang <huangxianliang@lanxincomputing.com>
Link: https://lore.kernel.org/r/20250820072248.312-1-huangxianliang@lanxincomputing.com
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
Much like arm-smmu in commit 7d835134d4e1 ("iommu/arm-smmu: Make
instance lookup robust"), virtio-iommu appears to have the same issue
where iommu_device_register() makes the IOMMU instance visible to other
API callers (including itself) straight away, but internally the
instance isn't ready to recognise itself for viommu_probe_device() to
work correctly until after viommu_probe() has returned. This matters a
lot more now that bus_iommu_probe() has the DT/VIOT knowledge to probe
client devices the way that was always intended. Tweak the lookup and
initialisation in much the same way as for arm-smmu, to ensure that what
we register is functional and ready to go.
Cc: stable@vger.kernel.org
Fixes: bcb81ac6ae3c ("iommu: Get DT/ACPI parsing into the proper probe path")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/308911aaa1f5be32a3a709996c7bd6cf71d30f33.1755190036.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
The arm_smmu_attach_commit() updates master->ats_enabled before calling
arm_smmu_remove_master_domain() that is supposed to clean up everything
in the old domain, including the old domain's nr_ats_masters. So, it is
supposed to use the old ats_enabled state of the device, not an updated
state.
This isn't a problem if switching between two domains where:
- old ats_enabled = false; new ats_enabled = false
- old ats_enabled = true; new ats_enabled = true
but can fail cases where:
- old ats_enabled = false; new ats_enabled = true
(old domain should keep the counter but incorrectly decreased it)
- old ats_enabled = true; new ats_enabled = false
(old domain needed to decrease the counter but incorrectly missed it)
Update master->ats_enabled after arm_smmu_remove_master_domain() to fix
this.
Fixes: 7497f4211f4f ("iommu/arm-smmu-v3: Make changing domains be hitless for ATS")
Cc: stable@vger.kernel.org
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Acked-by: Will Deacon <will@kernel.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Pranjal Shrivastava <praan@google.com>
Link: https://lore.kernel.org/r/20250801030127.2006979-1-nicolinc@nvidia.com
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
When we added coverage for ID_AA64MMFR3_EL1 we didn't add it to the list
of registers we read in the guest, do so.
Fixes: 0b593ef12afc ("KVM: arm64: selftests: Catch up set_id_regs with the kernel")
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250818-kvm-arm64-selftests-mmfr3-idreg-v1-1-2f85114d0163@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
The ARM64_FEATURE_MASK() macro was a hack introduce whilst the
automatic generation of sysreg encoding was introduced, and was
too unreliable to be entirely trusted.
We are in a better place now, and we could really do without this
macro. Get rid of it altogether.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250817202158.395078-7-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Allow userspace to write to RAS_frac, under the condition that
the host supports RASv1p1 with RAS_frac==1. Other configurations
will result in RAS_frac being exposed as 0, and therefore implicitly
not writable.
To avoid the clutter, the ID_AA64PFR1_EL1 sanitisation is moved to
its own function.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Link: https://lore.kernel.org/r/20250817202158.395078-6-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
