| Age | Commit message (Collapse) | Author |
|---|
|
The signal from the dual digital microphones connected to the DMIC_BE
takes 30ms to settle after being enabled. Add a dmic-codec with
corresponding wakeup-delay-ms to prevent an initial "pop" sound when
recording with the microphones.
Co-developed-by: Zoran Zhan <zoran.zhan@mediatek.com>
Signed-off-by: Zoran Zhan <zoran.zhan@mediatek.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250225-genio700-dmic-v2-8-3076f5b50ef7@collabora.com
[Angelo: Resolved merge conflicts]
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Add necessary routes for the onboard dual DMIC present on the Genio
700/510 EVK. The dmic is supplied by micbias0 and micbias2, and inputs
into the MT8188 DMIC DAI.
Co-developed-by: parkeryang <Parker.Yang@mediatek.com>
Signed-off-by: parkeryang <Parker.Yang@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20250225-genio700-dmic-v2-6-3076f5b50ef7@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
This board can use a MIPI-DSI panel on the DSI0 connector: in
preparation for adding an overlay for the Radxa Display 8HD,
add a pipeline connecting VDOSYS0 components to DSI0.
This pipeline remains disabled by default, as it is expected
to be enabled only by a devicetree overlay that declares the
actual DSI panel node, completing the graph.
Link: https://lore.kernel.org/r/20250213112008.56394-4-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
The base SoC devicetree now defines a display controller graph:
connect the board specific outputs (eDP internal display, DP
external display) to fully migrate Cherry and make it finally
possible to make Chromebooks and other board types to coexist
without per-board driver modifications.
Link: https://lore.kernel.org/r/20250213112008.56394-3-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
The display related IPs in MT8195 are flexible and support being
interconnected with different instances of DDP IPs and/or with
different DDP IPs, forming a full Display Data Path that ends
with an actual display output, which is board specific.
Add a common graph in the main mt8195.dtsi devicetree, which is
shared between all of the currently supported boards.
All boards featuring any display functionality will extend this
common graph to hook the display controller of the SoC to their
specific output port(s).
Link: https://lore.kernel.org/r/20250213112008.56394-2-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Fix the following warning for clock-controller node:
DTC [C] arch/arm64/boot/dts/airoha/en7581-evb.dtb
arch/arm64/boot/dts/airoha/en7581.dtsi:176.37-181.5: Warning (simple_bus_reg): /soc/clock-controller@1fa20000: simple-bus unit address format error, expected "1fb00000"
Fixes: 7693017580e9 ("arm64: dts: airoha: en7581: Add Clock Controller node")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250221-en7581-dts-spi-pinctrl-v3-2-4719e2d01555@kernel.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Introduce the following nodes to EN7581 SoC and EN7581 evaluation board:
- rng controller
- pinctrl
- i2c controllers
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250221-en7581-dts-spi-pinctrl-v3-1-4719e2d01555@kernel.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Add a pinctrl configuration for the Touchscreen IC's power line
to make sure that the pin is configured as GPIO and to stop
relying on correct pin configuration from bootloader.
Link: https://lore.kernel.org/r/20250220110948.45596-5-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
The base SoC devicetree now defines a display controller graph:
connect the board specific outputs (eDP internal display, DP
external display) to fully migrate Cherry and make it finally
possible to make Chromebooks and other board types to coexist
without per-board driver modifications.
Tested-by: Chen-Yu Tsai <wenst@chromium.org> # On MT8188 Ciri (int. and ext.)
Link: https://lore.kernel.org/r/20250220110948.45596-4-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
The display related IPs in MT8188 are flexible and support being
interconnected with different instances of DDP IPs and/or with
different DDP IPs, forming a full Display Data Path that ends
with an actual display output, which is board specific.
Add a common graph in the main mt8188.dtsi devicetree, which is
shared between all of the currently supported boards.
All boards featuring any display functionality will extend this
common graph to hook the display controller of the SoC to their
specific output port(s).
Tested-by: Chen-Yu Tsai <wenst@chromium.org> # On MT8188 Ciri (int. and ext.)
Link: https://lore.kernel.org/r/20250220110948.45596-2-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
This board features multiple USB connectors:
* One Type-C connector with Power Delivery and Alt. Modes;
* One MicroUSB connector, also used for bootloader SW download;
* One USB through the RaspberryPi-compatible pins header.
Add configuration for the MTU3 controllers providing OTG support
with role switching both on the MicroUSB port, RPi pins header,
and the Type-C port found on this board.
Moreover, add the Richtek RT1715 Type-C Power Delivery Controller
which manages current source/sink, linked to the iTE IT5205 Type-C
Alternate Mode Passive Mux, handling both mode switching between
USB (up to 3.1 Gen2 10Gbps) and DisplayPort (four lanes, DP1.4,
op to 8.1Gbps) and plug orientation switching.
All USB ports reside on different controller instances, and all of
them support host or gadget and can be configured as desired at
runtime.
Link: https://lore.kernel.org/r/20250220105514.43107-4-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
The MT8188 SoC has three USB controllers, and all of them are behind
the MTU3 DRD controller.
Add the missing MTU3 nodes, default disabled, for all USB controllers
and move the related XHCI nodes to be children of their MTU3 DRD to
correctly describe the SoC.
In order to retain USB functionality on all of the MT8188 and MT8390
boards, also move the vusb33 supply and enable the relevant MTU3 nodes
with special attention to the MT8188 Geralt Chromebooks, where it was
necessary to set the dr_mode of all MTU3 controllers to host to avoid
interfering with the EC performing DRD on its own.
Tested-by: Chen-Yu Tsai <wenst@chromium.org> # on MT8188 Ciri
Link: https://lore.kernel.org/r/20250220105514.43107-3-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Add a port used to connect the SuperSpeed output endpoint to a
Type-C connector.
Note that the MediaTek XHCI controllers are always in front of a
different controller handling the USB HS (usually, MTU3), so the
only port that this controller provides is SuperSpeed, while the
HighSpeed one comes from elsewhere.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250220105514.43107-2-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Enable USB Type-C support on MediaTek MT8395 Genio 1200 EVK by adding
configuration for TCPC Port, USB-C connector, MUX IT5205 and related
settings.
Configure dual role switch capability, set up PD (Power Delivery) profiles,
and establish endpoints for SS (SuperSpeed) and HS (HighSpeed) USB.
Update pinctrl configurations for U3 P0 VBus default pins and set dr_mode
to "otg" for OTG (On-The-Go) mode operation.
Add ITE IT5205 (TYPEC MUX) under I2C2 bus and configure its properties;
also add references and configurations to 'typec-mux' node.
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Yow-Shin Liou <yow-shin.liou@mediatek.com>
Signed-off-by: Simon Sun <simon.sun@yunjingtech.com>
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://lore.kernel.org/r/20250224114934.3583191-1-macpaul.lin@mediatek.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Define the ports property in the mediatek,mtu3 device tree binding schema.
Include definitions for port@0 and port@1, specifying their roles as
High Speed (HS) and Super Speed (SS) data buses, respectively.
Suggested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://lore.kernel.org/r/20250220142230.2530583-1-macpaul.lin@mediatek.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
usb_p2_vbus regulator has the same regulator-name property value as
sdio_fixed_3v3, so change it to avoid this.
Fixes: a4fd1943bf9b ("arm64: dts: mediatek: mt8390-genio-700-evk: update regulator names")
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250221-fix-mtk8390-genio-common-dup-regulator-name-v1-1-92f7b9f7a414@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
After commit 2be404486c05 ("HID: i2c-hid-of: Add reset GPIO support to
i2c-hid-of"), the i2c-hid-of driver used by some mt8183 devices resets
the touchscreen without having enough post-reset delay. This makes those
touchscreen fail to get probed.
Switch to Elan touchscreen driver, which has enough post-reset delay.
Fixes: 2be404486c05 ("HID: i2c-hid-of: Add reset GPIO support to i2c-hid-of")
Signed-off-by: Hsin-Te Yuan <yuanhsinte@chromium.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
This change fixes these dtbs_check errors for audio-codec:
1. pmic: 'mt6359codec' does not match any of the regexes: 'pinctrl-[0-9]+'
- Replace device node name to generic 'audio-codec'
2. pmic: regulators: 'compatible' is a required property
- Add 'mediatek,mt6359-codec' to compatible.
Fixes: 3b7d143be4b7 ("arm64: dts: mt6359: add PMIC MT6359 related nodes")
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250217113736.1867808-1-macpaul.lin@mediatek.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Add a node for the third instance of the eMMC/SD/SDIO controller
found on the MT8188 SoC and keep it disabled.
It is expected that only boards that are using this controller
instance will configure and enable it.
Link: https://lore.kernel.org/r/20241218105409.39165-1-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Add nodes for the DSC0 and MERGE0 blocks, located in VDOSYS0 and
necessary to add support for Display Stream Compression with a
display pipeline that looks like:
[other components] -> DSC0 -> MERGE0 -> Display Interface
Link: https://lore.kernel.org/r/20241218105356.39111-1-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Certain registers in the AFE IO space require the apll1 clock to be
enabled in order to be read, otherwise the machine hangs (registers like
0x280, 0x410 (AFE_GAIN1_CON0) and 0x830 (AFE_CONN0_5)). During AFE
driver probe, when initializing the regmap for the AFE IO space those
registers are read, resulting in a hang during boot.
This has been observed on the Genio 700 EVK, Genio 510 EVK and
MT8188-Geralt-Ciri Chromebook, all of which are based on the MT8188 SoC.
Assign CLK_TOP_APLL1_D4 as the parent for CLK_TOP_A1SYS_HP, which is
enabled during register read and write, to make sure the apll1 is
enabled during register operations and prevent the MT8188 machines from
hanging during boot.
Cc: stable@vger.kernel.org
Fixes: bd568ce198b8 ("arm64: dts: mediatek: mt8188: Add audio support")
Suggested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20250207-mt8188-afe-fix-hang-disabled-apll1-clk-v2-1-a636d844c272@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Add a basic device-tree (mt8370-genio-510-evk.dts) in order to be able
to boot the Genio 510 EVK board, based on MediaTek MT8370 SoC. As being
very close to the Genio 700 EVK board, the dts includes
mt8390-genio-common.dtsi file to use common definitions.
The Genio 510 EVK has following features:
- MT8370 SoC
- MT6365 PMIC
- MT6319 Buck IC
- 4GB LPDDR4X
- 64GB eMMC 5.1
- 12V DC Jack
- Micro SD card slot
- Push Button x 4 (Power, Reset, Download and Home Key)
- LED x 4 (Power, Reset, System on and Charging Status)
- USB Device Port x 1 (Micro USB Connector)
- USB Host Port x 1 (Type-C USB Connector)
- 3.5mm Earphone Jack x 1 (with Microphone Input)
- 3.5mm Line Out Audio Jack x 1
- Analog Microphone x 1
- Digital Microphone x 2
- Gigabit Ethernet with RJ45 connector
- HDMI 2.0 TX port with Type A HDMI connector
- eDP port
- 3x UART with serial-to-usb converters and micro USB connectors
- M.2 Slot x 2
- I2C Capacitive Touch Pad
- 4-Lane DSI x 2
- 4-Data Lane CSI x 2
- I2S Pin header
- 40-Pin 2.54mm Pin Header x 1
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Link: https://lore.kernel.org/r/20250206-dts_mt8370-genio-510-v3-4-5ca5c3257a4c@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
In preparation for introducing the Genio 510 EVK board support, split
mt8390-genio-700-evk.dts file in two to create mt8390-genio-common.dtsi
file, containing common definitions for both boards.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Link: https://lore.kernel.org/r/20250206-dts_mt8370-genio-510-v3-3-5ca5c3257a4c@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Add the support of the Mediatek MT8370 SoC, a less powerful variant of
MT8390 SoC.
Their main differences are:
- Arm Cortex-A55 cores number (4 vs 6)
- Arm Cortex-A78 core speed (2.0 GHz vs 2.2 Ghz)
- Arm Mali-G57 GPU core number (2 vs 3)
Like MT8390, MT8370 hardware register maps are identical to MT8188.
Note:
The devicetree for MT8370 SoC does not currently contain the needed
overrides to support the Mali GPU integrated into this SoC. This is
scheduled to be done with a later change.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Link: https://lore.kernel.org/r/20250206-dts_mt8370-genio-510-v3-2-5ca5c3257a4c@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
1. Add compatible for MT8370.
2. Add bindings for the MediaTek mt8370-evk board, also known
as the "Genio 510-EVK".
The MT8370, MT8390 and MT8188 belong to the same SoC family.
It is a less powerful variant of MT8390 SoC and their main
differences are:
- Arm Cortex-A55 cores number (4 vs 6)
- Arm Cortex-A78 core speed (2.0 GHz vs 2.2 Ghz)
- Arm Mali-G57 GPU core number (2 vs 3)
Like MT8390, MT8370 hardware register maps are identical to MT8188.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Link: https://lore.kernel.org/r/20250206-dts_mt8370-genio-510-v3-1-5ca5c3257a4c@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
MIPI DSI:
- Add "vsys_lcm_reg" regulator support and setup the "mt6357_vsim1_reg",
to power the pannel plugged to the DSI connector.
- Setup the Display Parallel Interface.
- Add the startek kd070fhfid015 pannel support.
HDMI:
- Add HDMI connector support.
- Add the "ite,it66121" HDMI bridge support, driven by I2C1.
- Setup the Display Parallel Interface.
Fix a typo in the ethernet node.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://lore.kernel.org/r/20231023-display-support-v7-6-6703f3e26831@baylibre.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
- Add aliases for each display components to help display drivers.
- Add the Display Pulse Width Modulation (DISP_PWM) to provide PWM signals
for the LED driver of mobile LCM.
- Add the MIPI Display Serial Interface (DSI) PHY support. (up to 4-lane
output)
- Add the display mutex support.
- Add the following display component support:
- OVL0 (Overlay)
- RDMA0 (Data Path Read DMA)
- Color0
- CCorr0 (Color Correction)
- AAL0 (Adaptive Ambient Light)
- GAMMA0
- Dither0
- DSI0 (Display Serial Interface)
- RDMA1 (Data Path Read DMA)
- DPI0 (Display Parallel Interface)
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://lore.kernel.org/r/20231023-display-support-v7-5-6703f3e26831@baylibre.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Some node names are incorrect, causing DT validations due to mismatches.
Fixes: b3a372484157 ("arm64: dts: Add mediatek MT8173 SoC and evaluation board dts and Makefile")
Fixes: f2ce70149568 ("arm64: dts: mt8173: Add clock controller device nodes")
Cc: Eddie Huang <eddie.huang@mediatek.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250108083424.2732375-3-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
The MT8173 disp-pwm device should have only one compatible string, based
on the following DT validation error:
arch/arm64/boot/dts/mediatek/mt8173-elm.dtb: pwm@1401e000: compatible: 'oneOf' conditional failed, one must be fixed:
['mediatek,mt8173-disp-pwm', 'mediatek,mt6595-disp-pwm'] is too long
'mediatek,mt8173-disp-pwm' is not one of ['mediatek,mt6795-disp-pwm', 'mediatek,mt8167-disp-pwm']
'mediatek,mt8173-disp-pwm' is not one of ['mediatek,mt8186-disp-pwm', 'mediatek,mt8188-disp-pwm', 'mediatek,mt8192-disp-pwm', 'mediatek,mt8195-disp-pwm', 'mediatek,mt8365-disp-pwm']
'mediatek,mt8173-disp-pwm' was expected
'mediatek,mt8183-disp-pwm' was expected
from schema $id: http://devicetree.org/schemas/pwm/mediatek,pwm-disp.yaml#
arch/arm64/boot/dts/mediatek/mt8173-elm.dtb: pwm@1401f000: compatible: 'oneOf' conditional failed, one must be fixed:
['mediatek,mt8173-disp-pwm', 'mediatek,mt6595-disp-pwm'] is too long
'mediatek,mt8173-disp-pwm' is not one of ['mediatek,mt6795-disp-pwm', 'mediatek,mt8167-disp-pwm']
'mediatek,mt8173-disp-pwm' is not one of ['mediatek,mt8186-disp-pwm', 'mediatek,mt8188-disp-pwm', 'mediatek,mt8192-disp-pwm', 'mediatek,mt8195-disp-pwm', 'mediatek,mt8365-disp-pwm']
'mediatek,mt8173-disp-pwm' was expected
'mediatek,mt8183-disp-pwm' was expected
from schema $id: http://devicetree.org/schemas/pwm/mediatek,pwm-disp.yaml#
Drop the extra "mediatek,mt6595-disp-pwm" compatible string.
Fixes: 61aee9342514 ("arm64: dts: mt8173: add MT8173 display PWM driver support node")
Cc: YH Huang <yh.huang@mediatek.com>
Cc: stable@vger.kernel.org # v4.5+
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250108083424.2732375-2-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
The PMIC has child nodes for each of its functions. It is not an actual
bus and no addressing is involved.
Dropping the bogus properties fixes a DT validation error:
arch/arm64/boot/dts/mediatek/mt8173-elm.dtb: pmic: '#address-cells', '#size-cells' do not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/mfd/mediatek,mt6397.yaml#
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202412212322.JTFpRD7X-lkp@intel.com/
Fixes: 689b937bedde ("arm64: dts: mediatek: add mt8173 elm and hana board")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250108083424.2732375-1-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Add default partition table for EN7581 SoC EVB board.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250105150328.15172-3-ansuelsmth@gmail.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Add SNAND node to enable support of attached SPI-NAND on the EN7581 SoC.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250105150328.15172-2-ansuelsmth@gmail.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Add Clock Controller node for EN7581 SoC to correctly expose supported
clock for any user in the SoC.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250105150328.15172-1-ansuelsmth@gmail.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
Pull turbostat updates from Len Brown:
- Fix regression that affinitized forked child in one-shot mode.
- Harden one-shot mode against hotplug online/offline
- Enable RAPL SysWatt column by default
- Add initial PTL, CWF platform support
- Harden initial PMT code in response to early use
- Enable first built-in PMT counter: CWF c1e residency
- Refuse to run on unsupported platforms without --force, to encourage
updating to a version that supports the system, and to avoid
no-so-useful measurement results
* tag 'turbostat-2025.02.02' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (25 commits)
tools/power turbostat: version 2025.02.02
tools/power turbostat: Add CPU%c1e BIC for CWF
tools/power turbostat: Harden one-shot mode against cpu offline
tools/power turbostat: Fix forked child affinity regression
tools/power turbostat: Add tcore clock PMT type
tools/power turbostat: version 2025.01.14
tools/power turbostat: Allow adding PMT counters directly by sysfs path
tools/power turbostat: Allow mapping multiple PMT files with the same GUID
tools/power turbostat: Add PMT directory iterator helper
tools/power turbostat: Extend PMT identification with a sequence number
tools/power turbostat: Return default value for unmapped PMT domains
tools/power turbostat: Check for non-zero value when MSR probing
tools/power turbostat: Enhance turbostat self-performance visibility
tools/power turbostat: Add fixed RAPL PSYS divisor for SPR
tools/power turbostat: Fix PMT mmaped file size rounding
tools/power turbostat: Remove SysWatt from DISABLED_BY_DEFAULT
tools/power turbostat: Add an NMI column
tools/power turbostat: add Busy% to "show idle"
tools/power turbostat: Introduce --force parameter
tools/power turbostat: Improve --help output
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux
Pull sh updates from John Paul Adrian Glaubitz:
"Fixes and improvements for sh:
- replace seq_printf() with the more efficient
seq_put_decimal_ull_width() to increase performance when stress
reading /proc/interrupts (David Wang)
- migrate sh to the generic rule for built-in DTB to help avoid race
conditions during parallel builds which can occur because Kbuild
decends into arch/*/boot/dts twice (Masahiro Yamada)
- replace select with imply in the board Kconfig for enabling
hardware with complex dependencies. This addresses warnings which
were reported by the kernel test robot (Geert Uytterhoeven)"
* tag 'sh-for-v6.14-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux:
sh: boards: Use imply to enable hardware with complex dependencies
sh: Migrate to the generic rule for built-in DTB
sh: irq: Use seq_put_decimal_ull_width() for decimal values
|
|
Summary of Changes since 2024.11.30:
Fix regression in 2023.11.07 that affinitized forked child
in one-shot mode.
Harden one-shot mode against hotplug online/offline
Enable RAPL SysWatt column by default.
Add initial PTL, CWF platform support.
Harden initial PMT code in response to early use.
Enable first built-in PMT counter: CWF c1e residency
Refuse to run on unsupported platforms without --force,
to encourage updating to a version that supports the system,
and to avoid no-so-useful measurement results.
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Pull misc vfs cleanups from Al Viro:
"Two unrelated patches - one is a removal of long-obsolete include in
overlayfs (it used to need fs/internal.h, but the extern it wanted has
been moved back to include/linux/namei.h) and another introduces
convenience helper constructing struct qstr by a NUL-terminated
string"
* tag 'pull-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
add a string-to-qstr constructor
fs/overlayfs/namei.c: get rid of include ../internal.h
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fix from Thomas Bogendoerfer:
"Revert commit breaking sysv ipc for o32 ABI"
* tag 'mips_6.14_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
Revert "mips: fix shmctl/semctl/msgctl syscall for o32"
|
|
git://git.samba.org/sfrench/cifs-2.6
Pull more smb client updates from Steve French:
- various updates for special file handling: symlink handling,
support for creating sockets, cleanups, new mount options (e.g. to
allow disabling using reparse points for them, and to allow
overriding the way symlinks are saved), and fixes to error paths
- fix for kerberos mounts (allow IAKerb)
- SMB1 fix for stat and for setting SACL (auditing)
- fix an incorrect error code mapping
- cleanups"
* tag 'v6.14-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6: (21 commits)
cifs: Fix parsing native symlinks directory/file type
cifs: update internal version number
cifs: Add support for creating WSL-style symlinks
smb3: add support for IAKerb
cifs: Fix struct FILE_ALL_INFO
cifs: Add support for creating NFS-style symlinks
cifs: Add support for creating native Windows sockets
cifs: Add mount option -o reparse=none
cifs: Add mount option -o symlink= for choosing symlink create type
cifs: Fix creating and resolving absolute NT-style symlinks
cifs: Simplify reparse point check in cifs_query_path_info() function
cifs: Remove symlink member from cifs_open_info_data union
cifs: Update description about ACL permissions
cifs: Rename struct reparse_posix_data to reparse_nfs_data_buffer and move to common/smb2pdu.h
cifs: Remove struct reparse_posix_data from struct cifs_open_info_data
cifs: Remove unicode parameter from parse_reparse_point() function
cifs: Fix getting and setting SACLs over SMB1
cifs: Remove intermediate object of failed create SFU call
cifs: Validate EAs for WSL reparse points
cifs: Change translation of STATUS_PRIVILEGE_NOT_HELD to -EPERM
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull debugfs fix from Greg KH:
"Here is a single debugfs fix from Al to resolve a reported regression
in the driver-core tree. It has been reported to fix the issue"
* tag 'driver-core-6.14-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
debugfs: Fix the missing initializations in __debugfs_file_get()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"21 hotfixes. 8 are cc:stable and the remainder address post-6.13
issues. 13 are for MM and 8 are for non-MM.
All are singletons, please see the changelogs for details"
* tag 'mm-hotfixes-stable-2025-02-01-03-56' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (21 commits)
MAINTAINERS: include linux-mm for xarray maintenance
revert "xarray: port tests to kunit"
MAINTAINERS: add lib/test_xarray.c
mailmap, MAINTAINERS, docs: update Carlos's email address
mm/hugetlb: fix hugepage allocation for interleaved memory nodes
mm: gup: fix infinite loop within __get_longterm_locked
mm, swap: fix reclaim offset calculation error during allocation
.mailmap: update email address for Christopher Obbard
kfence: skip __GFP_THISNODE allocations on NUMA systems
nilfs2: fix possible int overflows in nilfs_fiemap()
mm: compaction: use the proper flag to determine watermarks
kernel: be more careful about dup_mmap() failures and uprobe registering
mm/fake-numa: handle cases with no SRAT info
mm: kmemleak: fix upper boundary check for physical address objects
mailmap: add an entry for Hamza Mahfooz
MAINTAINERS: mailmap: update Yosry Ahmed's email address
scripts/gdb: fix aarch64 userspace detection in get_current_task
mm/vmscan: accumulate nr_demoted for accurate demotion statistics
ocfs2: fix incorrect CPU endianness conversion causing mount failure
mm/zsmalloc: add __maybe_unused attribute for is_first_zpdesc()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fix from Mauro Carvalho Chehab:
"A revert for a regression in the uvcvideo driver"
* tag 'media/v6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
Revert "media: uvcvideo: Require entities to have a non-zero unique ID"
|
|
MM developers have an interest in the xarray code.
Cc: David Gow <davidgow@google.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Tamir Duberstein <tamird@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Revert c7bb5cf9fc4e ("xarray: port tests to kunit"). It broke the build
when compiing the xarray userspace test harness code.
Reported-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Closes: https://lkml.kernel.org/r/07cf896e-adf8-414f-a629-a808fc26014a@oracle.com
Cc: David Gow <davidgow@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Tamir Duberstein <tamird@gmail.com>
Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Ensure test-only changes are sent to the relevant maintainer.
Link: https://lkml.kernel.org/r/20250129-xarray-test-maintainer-v1-1-482e31f30f47@gmail.com
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Cc: Mattew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Update .mailmap to reflect my new (and final) primary email address,
carlos.bilbao@kernel.org. Also update contact information in files
Documentation/translations/sp_SP/index.rst and MAINTAINERS.
Link: https://lkml.kernel.org/r/20250130012248.1196208-1-carlos.bilbao@kernel.org
Signed-off-by: Carlos Bilbao <carlos.bilbao@kernel.org>
Cc: Carlos Bilbao <bilbao@vt.edu>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mattew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
gather_bootmem_prealloc() assumes the start nid as 0 and size as
num_node_state(N_MEMORY). That means in case if memory attached numa
nodes are interleaved, then gather_bootmem_prealloc_parallel() will fail
to scan few of these nodes.
Since memory attached numa nodes can be interleaved in any fashion, hence
ensure that the current code checks for all numa node ids
(.size = nr_node_ids). Let's still keep max_threads as N_MEMORY, so that
it can distributes all nr_node_ids among the these many no. threads.
e.g. qemu cmdline
========================
numa_cmd="-numa node,nodeid=1,memdev=mem1,cpus=2-3 -numa node,nodeid=0,cpus=0-1 -numa dist,src=0,dst=1,val=20"
mem_cmd="-object memory-backend-ram,id=mem1,size=16G"
w/o this patch for cmdline (default_hugepagesz=1GB hugepagesz=1GB hugepages=2):
==========================
~ # cat /proc/meminfo |grep -i huge
AnonHugePages: 0 kB
ShmemHugePages: 0 kB
FileHugePages: 0 kB
HugePages_Total: 0
HugePages_Free: 0
HugePages_Rsvd: 0
HugePages_Surp: 0
Hugepagesize: 1048576 kB
Hugetlb: 0 kB
with this patch for cmdline (default_hugepagesz=1GB hugepagesz=1GB hugepages=2):
===========================
~ # cat /proc/meminfo |grep -i huge
AnonHugePages: 0 kB
ShmemHugePages: 0 kB
FileHugePages: 0 kB
HugePages_Total: 2
HugePages_Free: 2
HugePages_Rsvd: 0
HugePages_Surp: 0
Hugepagesize: 1048576 kB
Hugetlb: 2097152 kB
Link: https://lkml.kernel.org/r/f8d8dad3a5471d284f54185f65d575a6aaab692b.1736592534.git.ritesh.list@gmail.com
Fixes: b78b27d02930 ("hugetlb: parallelize 1G hugetlb initialization")
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reported-by: Pavithra Prakash <pavrampu@linux.ibm.com>
Suggested-by: Muchun Song <muchun.song@linux.dev>
Tested-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Reviewed-by: Luiz Capitulino <luizcap@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Donet Tom <donettom@linux.ibm.com>
Cc: Gang Li <gang.li@linux.dev>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
We can run into an infinite loop in __get_longterm_locked() when
collect_longterm_unpinnable_folios() finds only folios that are isolated
from the LRU or were never added to the LRU. This can happen when all
folios to be pinned are never added to the LRU, for example when
vm_ops->fault allocated pages using cma_alloc() and never added them to
the LRU.
Fix it by simply taking a look at the list in the single caller, to see if
anything was added.
[zhaoyang.huang@unisoc.com: move definition of local]
Link: https://lkml.kernel.org/r/20250122012604.3654667-1-zhaoyang.huang@unisoc.com
Link: https://lkml.kernel.org/r/20250121020159.3636477-1-zhaoyang.huang@unisoc.com
Fixes: 67e139b02d99 ("mm/gup.c: refactor check_and_migrate_movable_pages()")
Signed-off-by: Zhaoyang Huang <zhaoyang.huang@unisoc.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Aijun Sun <aijun.sun@unisoc.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
There is a code error that will cause the swap entry allocator to reclaim
and check the whole cluster with an unexpected tail offset instead of the
part that needs to be reclaimed. This may cause corruption of the swap
map, so fix it.
Link: https://lkml.kernel.org/r/20250130115131.37777-1-ryncsn@gmail.com
Fixes: 3b644773eefd ("mm, swap: reduce contention on device lock")
Signed-off-by: Kairui Song <kasong@tencent.com>
Cc: Chris Li <chrisl@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
