summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-05-04drm/amd/smu: Increace dpm level count only for smu v13.0.2Likun Gao
Only V13.0.2 on SMU v13 will get 0 based max level from fw and increment by one, other ASIC will not need for this. V2: replace the asic_type check with ip versioning check. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-05-04drm/amdgpu: add soc21 ih clientid definitionStanley Yang
Define soc21 ih clientid Signed-off-by: Stanley Yang <Stanley.Yang@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-05-04drm/amdgpu: add osssys v6_0_0 ip headers v4Hawking Zhang
Add osssys v6_0_0 register offset and shift masks header files (Hawking) Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Likun Gao <Likun.Gao@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Likun Gao <Likun.Gao@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-05-04drm/amdgpu/discovery: add NBIO 4.3 SupportLikun Gao
Enable NBIO 4.3 on asics where it is present. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-05-04drm/amdgpu: add nbio v4_3_0 ip block v2Stanley.Yang
This adds nbio v4_3_0 ip block support Changed from v1: use WREG32_SOC15/RREG32_SOC15 instead of WREG32_PCIE/RREG32_PCIE remove the programming of PCIE_CONFIG_CNTL Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-05-04drm/amdgpu: add nbio v4_3_0 ip headers v6Hawking Zhang
Add nbio v4_3_0 register offset and shift masks header files (Hawking) Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Likun Gao <Likun.Gao@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Likun Gao <Likun.Gao@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-05-04drm/amdgpu/discovery: add soc21 common SupportLikun Gao
Enable soc21 common support on asics where it is present. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-05-04drm/amd/display: Avoid reading audio pattern past AUDIO_CHANNELS_COUNTHarry Wentland
A faulty receiver might report an erroneous channel count. We should guard against reading beyond AUDIO_CHANNELS_COUNT as that would overflow the dpcd_pattern_period array. Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-05-04drm/i915: use IOMEM_ERR_PTR() directlyKefeng Wang
Use IOMEM_ERR_PTR() instead of self defined IO_ERR_PTR(). Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220503144937.679424-1-tvrtko.ursulin@linux.intel.com
2022-05-04drm/etnaviv: avoid cleaning up sched_job when submit succeededLucas Stach
While the labels may mislead the casual reader, the tail of the function etnaviv_ioctl_gem_submit is always executed, as a lot of the structures set up in this function need to be cleaned up regardless of whether the submit succeeded or failed. An exception is the newly added drm_sched_job_cleanup, which must only be called when the submit failed before handing the job to the scheduler. Fixes: b827c84f5e84 ("drm/etnaviv: Use scheduler dependency handling") Reported-by: Michael Walle <michael@walle.cc> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20220504090229.2506560-1-l.stach@pengutronix.de
2022-05-04drm: fix typo in commentRaphael Gallais-Pou
Fix typo in a doxygen comment (replaced green by blue) in drm_color_mgmt.c Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20220426131912.3850354-1-raphael.gallais-pou@foss.st.com
2022-05-04drm/rockchip: Add VOP2 driverAndy Yan
The VOP2 unit is found on Rockchip SoCs beginning with rk3566/rk3568. It replaces the VOP unit found in the older Rockchip SoCs. This driver has been derived from the downstream Rockchip Kernel and heavily modified: - All nonstandard DRM properties have been removed - dropped struct vop2_plane_state and pass around less data between functions - Dropped all DRM_FORMAT_* not known on upstream - rework register access to get rid of excessively used macros - Drop all waiting for framesyncs The driver is tested with HDMI and MIPI-DSI display on a RK3568-EVB board. Overlay support is tested with the modetest utility. AFBC support on the cluster windows is tested with weston-simple-dmabuf-egl on weston using the (yet to be upstreamed) panfrost driver support. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Co-Developed-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Tested-by: Michael Riesch <michael.riesch@wolfvision.net> [dt-binding-header:] Acked-by: Rob Herring <robh@kernel.org> [moved dt-binding header from dt-nodes patch to here and made checkpatch --strict happier] Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220422072841.2206452-23-s.hauer@pengutronix.de
2022-05-04drm/rockchip: Make VOP driver optionalSascha Hauer
With upcoming VOP2 support VOP won't be the only choice anymore, so make the VOP driver optional. This also adds a dependency from ROCKCHIP_ANALOGIX_DP to ROCKCHIP_VOP, because that driver currently only links and works with the VOP driver. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Tested-by: Michael Riesch <michael.riesch@wolfvision.net> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220422072841.2206452-22-s.hauer@pengutronix.de
2022-05-04dt-bindings: display: rockchip: dw-hdmi: fix ports descriptionSascha Hauer
Current port description doesn't cover all possible cases. It currently expects one single port with two endpoints. When the HDMI connector is described in the device tree there can be two ports, first one going to the VOP and the second one going to the connector. Also on SoCs which only have a single VOP there will be only one endpoint instead of two. This patch addresses both issues. With this there can either be a single port ("port") , or two of them ("port@0", "port@1") when the connector is also in the device tree. Also the first or only port can either have one endpoint ("endpoint") for single VOP SoCs or two ("endpoint@0", "endpoint@1") for dual VOP SoCs. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Rob Herring <robh@kernel.org> Tested-by: Michael Riesch <michael.riesch@wolfvision.net> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220422072841.2206452-25-s.hauer@pengutronix.de
2022-05-04dt-bindings: display: rockchip: Add binding for VOP2Sascha Hauer
The VOP2 is found on newer Rockchip SoCs like the rk3568 or the rk3566. The binding differs slightly from the existing VOP binding, so add a new binding file for it. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Rob Herring <robh@kernel.org> Tested-by: Michael Riesch <michael.riesch@wolfvision.net> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220422072841.2206452-24-s.hauer@pengutronix.de
2022-05-04dma-buf/sync_file: cleanup fence merging a bitChristian König
krealloc_array() ignores attempts to reduce the array size, so the attempt to save memory is completely pointless here. Also move testing for the no fence case into sync_file_set_fence(), this way we don't even touch the fence array when we don't have any fences. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20220426124637.329764-1-christian.koenig@amd.com
2022-05-04drm/amdgpu: fix drm-next merge falloutChristian König
That hunk somehow got missing while solving the conflict between the TTM and AMDGPU changes for drm-next. Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220503063613.46925-1-christian.koenig@amd.com
2022-05-03drm/i915/pvc: add initial Ponte Vecchio definitionsStuart Summers
Additional blitter and media engines will be enabled later. Bspec: 44481, 44482 Signed-off-by: Stuart Summers <stuart.summers@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220502163417.2635462-2-matthew.d.roper@intel.com
2022-05-03drm/i915: Fix assert in i915_ggtt_pinTvrtko Ursulin
Use lockdep_assert_not_held to simplify and correct the code. Otherwise false positive are hit if lock state is uknown like after a previous taint. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220429140757.651406-1-tvrtko.ursulin@linux.intel.com
2022-05-03drm/simpledrm: Use fbdev defaults for shadow bufferingThomas Zimmermann
Don't select shadow buffering for the fbdev console explicitly. The fbdev emulation's heuristic will enable it for any framebuffer with .dirty callback. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220303205839.28484-2-tzimmermann@suse.de
2022-05-03fbdev: Use pageref offset for deferred-I/O writebackThomas Zimmermann
Use pageref->offset instead of page->index for deferred-I/O writeback where appropriate. Distinguishes between file-mapping offset and video- memory offset. While at it, also remove unnecessary references to struct page. Fbdev's deferred-I/O code uses the two related page->index and pageref->offset. The former is the page offset in the mapped file, the latter is the byte offset in the video memory (or fbdev screen buffer). It's the same value for fbdev drivers, but for DRM the values can be different. Because GEM buffer objects are mapped at an offset in the DRM device file, page->index has this offset added to it as well. We currently don't hit this case in DRM, because all affected mappings of GEM memory are performed with an internal, intermediate shadow buffer. The value of page->index is required by page_mkclean(), which we call to reset the mappings during the writeback phase of the deferred I/O. The value of pageref->offset is for conveniently getting an offset into video memory in fb helpers. v4: * fix commit message (Javier) Suggested-by: Javier Martinez Canillas <javierm@redhat.com> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220429100834.18898-6-tzimmermann@suse.de
2022-05-03fbdev: Rename pagelist to pagereflist for deferred I/OThomas Zimmermann
Rename various instances of pagelist to pagereflist. The list now stores pageref structures, so the new name is more appropriate. In their write-back helpers, several fbdev drivers refer to the pageref list in struct fb_deferred_io instead of using the one supplied as argument to the function. Convert them over to the supplied one. It's the same instance, so no change of behavior occurs. v4: * fix commit message (Javier) Suggested-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220429100834.18898-5-tzimmermann@suse.de
2022-05-03fbdev: Refactor implementation of page_mkwriteThomas Zimmermann
Refactor the page-write handler for deferred I/O. Drivers use the function to let fbdev track written pages of mmap'ed framebuffer memory. v3: * keep locking within track-pages function for readability (Sam) v2: * don't export the helper until we have an external caller Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220429100834.18898-4-tzimmermann@suse.de
2022-05-03fbdev: Track deferred-I/O pages in pageref structThomas Zimmermann
Store the per-page state for fbdev's deferred I/O in struct fb_deferred_io_pageref. Maintain a list of pagerefs for the pages that have to be written back to video memory. Update all affected drivers. As with pages before, fbdev acquires a pageref when an mmaped page of the framebuffer is being written to. It holds the pageref in a list of all currently written pagerefs until it flushes the written pages to video memory. Writeback occurs periodically. After writeback fbdev releases all pagerefs and builds up a new dirty list until the next writeback occurs. Using pagerefs has a number of benefits. For pages of the framebuffer, the deferred I/O code used struct page.lru as an entry into the list of dirty pages. The lru field is owned by the page cache, which makes deferred I/O incompatible with some memory pages (e.g., most notably DRM's GEM SHMEM allocator). struct fb_deferred_io_pageref now provides an entry into a list of dirty framebuffer pages, freeing lru for use with the page cache. Drivers also assumed that struct page.index is the page offset into the framebuffer. This is not true for DRM buffers, which are located at various offset within a mapped area. struct fb_deferred_io_pageref explicitly stores an offset into the framebuffer. struct page.index is now only the page offset into the mapped area. These changes will allow DRM to use fbdev deferred I/O without an intermediate shadow buffer. v3: * use pageref->offset for sorting * fix grammar in comment v2: * minor fixes in commit message Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220429100834.18898-3-tzimmermann@suse.de
2022-05-03fbdev: Put mmap for deferred I/O into driversThomas Zimmermann
The fbdev mmap function fb_mmap() unconditionally overrides the driver's implementation if deferred I/O has been activated. This makes it hard to implement mmap with anything but a vmalloc()'ed software buffer. That is specifically a problem for DRM, where video memory is maintained by a memory manager. Leave the mmap handling to drivers and expect them to call the helper for deferred I/O by thmeselves. v4: * unlock mm_lock in fb_mmap() error path (Dan) v3: * fix warning if fb_mmap is missing (kernel test robot) v2: * print a helpful error message if the defio setup is incorrect (Javier) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220429100834.18898-2-tzimmermann@suse.de
2022-05-03drm/ast: Create the driver for ASPEED proprietory Display-PortKuoHsiang Chou
V1: 1. The MCU FW controling ASPEED DP is loaded by BMC boot loader. 2. Driver starts after CR[3:1] == 111b that indicates Tx is ASTDP, and CRD1[5] has been asserted by BMVC boot loader. 3. EDID is prioritized by DP monitor. 4. DP's EDID has high priority to decide resolution supporting. V2: Modules description: 1. ASTDP (ASPEED DisplayPort) is controlled by dedicated AST-MCU (ASPEED propriatary MCU). 2. MCU is looping in charged of HPD, Read EDID, Link Training with DP sink. 3. ASTDP and AST-MUC reside in BMC (Baseboard Management controller) addressing-space. 4. ASPEED DRM driver requests MCU to get HPD and EDID by CR-scratched register. Booting sequence: 1. Check if TX is ASTDP // ast_dp_launch() 2. Check if DP-MCU FW has loaded // ast_dp_launch() 3. Read EDID // ast_dp_read_edid() 4. Resolution switch // ast_dp_SetOutput() V3: 1. Remove unneeded semicolon. 2. Apply to git://anongit.freedesktop.org/drm/drm, instead of git://anongit.freedesktop.org/drm/drm-misc 3. Resolve auto build test WARNINGs on V1 patch. V4: 1. Sync code-base with kernel 5.17_rc6 2. Remove the define of DPControlPower, because DP chips need to be powered on to be used. 3. Remove the switches of PHY and Display from EDID procedure. 4. Revise increaing delay to fixed delay, because this version kernel doesn't detect minitor consistenntly. 5. Create clean-up code used for reset of power state on errors with -EIO manner. 6. Revise the DP detection by TX type and its DP-FW status during booting and resume. 7. Correct the CamelCase Style. 8. Use register reading while needing, and remove to hold full register. 9. Instead of 'u8', revise to 'bool' on swwitch of PHY and video. 10.Correct typo 11.Remove the duplicated copy of TX definition. 12.Use EDID_LENGTH as the constant of 128. Signed-off-by: KuoHsiang Chou <kuohsiang_chou@aspeedtech.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220428075603.20904-1-kuohsiang_chou@aspeedtech.com
2022-05-03dt-bindings: display: rockchip: dw-hdmi: Make unwedge pinctrl optionalSascha Hauer
None of the upstream device tree files has a "unwedge" pinctrl specified. Make it optional. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Rob Herring <robh@kernel.org> Tested-by: Michael Riesch <michael.riesch@wolfvision.net> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220422072841.2206452-16-s.hauer@pengutronix.de
2022-05-03drm/rockchip: dw_hdmi: add regulator supportSascha Hauer
The RK3568 has HDMI_TX_AVDD0V9 and HDMI_TX_AVDD_1V8 supply inputs needed for the HDMI port. add support for these to the driver for boards which have them supplied by switchable regulators. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Tested-by: Michael Riesch <michael.riesch@wolfvision.net> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220422072841.2206452-10-s.hauer@pengutronix.de
2022-05-03dt-bindings: display: rockchip: dw-hdmi: Add regulator supportSascha Hauer
The RK3568 has HDMI_TX_AVDD0V9 and HDMI_TX_AVDD_1V8 supply inputs needed for the HDMI port. Add the binding for these supplies. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Rob Herring <robh@kernel.org> Tested-by: Michael Riesch <michael.riesch@wolfvision.net> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220422072841.2206452-11-s.hauer@pengutronix.de
2022-05-03drm/rockchip: dw_hdmi: add rk3568 supportSascha Hauer
Add a new dw_hdmi_plat_data struct and new compatible for rk3568. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Tested-by: Michael Riesch <michael.riesch@wolfvision.net> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220422072841.2206452-8-s.hauer@pengutronix.de
2022-05-03dt-bindings: display: rockchip: dw-hdmi: Add compatible for rk3568 HDMIBenjamin Gaignard
Define a new compatible for rk3568 HDMI. This version of HDMI hardware block needs two new clocks hclk_vio and hclk to provide phy reference clocks. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Tested-by: Michael Riesch <michael.riesch@wolfvision.net> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220422072841.2206452-9-s.hauer@pengutronix.de
2022-05-03Merge drm/drm-next into drm-misc-nextMaxime Ripard
Christian needs a backmerge to avoid a merge conflict for amdgpu. Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2022-05-03dt-bindings: display: rockchip: dw-hdmi: use "ref" as clock nameSascha Hauer
"vpll" is a misnomer. A clock input to a device should be named after the usage in the device, not after the clock that drives it. On the rk3568 the same clock is driven by the HPLL. This patch adds "ref" as a new alternative clock name for "vpll" Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Rob Herring <robh@kernel.org> Tested-by: Michael Riesch <michael.riesch@wolfvision.net> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220422072841.2206452-6-s.hauer@pengutronix.de
2022-05-03drm/rockchip: dw_hdmi: rename vpll clock to reference clockSascha Hauer
"vpll" is a misnomer. A clock input to a device should be named after the usage in the device, not after the clock that drives it. On the rk3568 the same clock is driven by the HPLL. To fix that, this patch renames the vpll clock to ref clock. The clock name "vpll" is left for compatibility to old device trees. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Tested-by: Michael Riesch <michael.riesch@wolfvision.net> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220422072841.2206452-5-s.hauer@pengutronix.de
2022-05-03drm/rockchip: Add crtc_endpoint_id to rockchip_encoderSascha Hauer
The VOP2 has an interface mux which decides to which encoder(s) a CRTC is routed to. The encoders and CRTCs are connected via of_graphs in the device tree. When given an encoder the VOP2 driver needs to know to which internal register setting this encoder matches. For this the VOP2 binding offers different endpoints, one for each possible encoder. The endpoint ids of these endpoints are used as a key from an encoders device tree description to the internal register setting. This patch adds the key aka endpoint id to struct rockchip_encoder plus a function to read the endpoint id starting from the encoders device node. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Tested-by: Michael Riesch <michael.riesch@wolfvision.net> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220422072841.2206452-4-s.hauer@pengutronix.de
2022-05-03drm/rockchip: Embed drm_encoder into rockchip_decoderSascha Hauer
The VOP2 driver needs rockchip specific information for a drm_encoder. This patch creates a struct rockchip_encoder with a struct drm_encoder embedded in it. This is used throughout the rockchip driver instead of struct drm_encoder directly. The information the VOP2 drivers needs is the of_graph endpoint node of the encoder. To ease bisectability this is added here. While at it convert the different encoder-to-driverdata macros to static inline functions in order to gain type safety and readability. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Tested-by: Michael Riesch <michael.riesch@wolfvision.net> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220422072841.2206452-3-s.hauer@pengutronix.de
2022-05-03drm/i915: remove superfluous string helper includeJani Nikula
Remove the duplicate and incorrect (uses "" instead of <>) linux/string_helpers.h include. Fixes: cc1338f259a2 ("drm/i915/xehp: Update topology dumps for Xe_HP") Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220425154754.990815-1-jani.nikula@intel.com
2022-05-03Backmerge tag 'v5.18-rc5' of ↵Dave Airlie
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into drm-next Linux 5.18-rc5 There was a build fix for arm I wanted in drm-next, so backmerge rather then cherry-pick. Signed-off-by: Dave Airlie <airlied@redhat.com>
2022-05-03drm/i915/gt: Document the eviction of the Flat-CCS objectsRamalingam C
Capture the eviction details for Flat-CCS capable, lmem objects. v2: Fix the Flat-ccs capbility of lmem obj with smem residency possibility [Thomas] v3: Fixed the suggestions [Matt] Signed-off-by: Ramalingam C <ramalingam.c@intel.com> cc: Thomas Hellstrom <thomas.hellstrom@linux.intel.com> cc: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220502142618.2704-4-ramalingam.c@intel.com
2022-05-03drm/i915/gt: optimize the ccs_sz calculation per chunkRamalingam C
Calculate the ccs_sz that needs to be emitted based on the src and dst pages emitted per chunk. And handle the return value of emit_pte for the ccs pages. v2: ccs_sz moved to the reduced scope [Matt] Signed-off-by: Ramalingam C <ramalingam.c@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220502142618.2704-3-ramalingam.c@intel.com
2022-05-03drm/rockchip: Support YUV formats with U/V swappedChen-Yu Tsai
The VOP in Rockchip SoCs that support YUV planes also support swapping of the U and V elements. Supporting the swapped variants, especially NV21, would be beneficial for multimedia applications, as the hardware video decoders only output NV21, and supporting this pixel format in the display pipeline would allow the decoded video frames to be output directly. Add support for this to support the various formats that have U/V swapped. Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220114074038.2633848-1-wenst@chromium.org
2022-05-02drm/rockchip: rk3066_hdmi: Replace drm_detect_hdmi_monitor() with is_hdmiJosé Expósito
Once EDID is parsed, the monitor HDMI support information is available through drm_display_info.is_hdmi. This driver calls drm_detect_hdmi_monitor() to receive the same information and stores its own cached value, which is less efficient. Avoid calling drm_detect_hdmi_monitor() and use drm_display_info.is_hdmi instead and also remove hdmi_data_info.sink_is_hdmi as it is no longer necessary. Signed-off-by: José Expósito <jose.exposito89@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220421170725.903361-4-jose.exposito89@gmail.com
2022-05-02drm/rockchip: inno_hdmi: Replace drm_detect_hdmi_monitor() with is_hdmiJosé Expósito
Once EDID is parsed, the monitor HDMI support information is available through drm_display_info.is_hdmi. This driver calls drm_detect_hdmi_monitor() to receive the same information and stores its own cached value, which is less efficient. Avoid calling drm_detect_hdmi_monitor() and use drm_display_info.is_hdmi instead and also remove hdmi_data_info.sink_is_hdmi as it is no longer necessary. Signed-off-by: José Expósito <jose.exposito89@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220421170725.903361-3-jose.exposito89@gmail.com
2022-05-02drm/rockchip: cdn-dp: change rk3399_cdn_dp from global to staticTom Rix
Smatch reports this issue cdn-dp-core.c:51:20: warning: symbol 'rk3399_cdn_dp' was not declared. Should it be static? rk3399_cdn_dp is only used in cdn-dp-core.c so change its storge-class specifier to static. Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220421144304.586396-1-trix@redhat.com
2022-05-02drm/rockchip: Refactor IOMMU initialisationRobin Murphy
Defer the IOMMU domain setup until after successfully binding components, so we can figure out IOMMU support directly from the VOP devices themselves, rather than manually inferring it from the DT (which also fails to account for whether the IOMMU driver is actually loaded). Although this is somewhat of a logical cleanup, the main motivation is to prepare for a change in the iommu_domain_alloc() interface. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/94eee7ab434fe11eb0787f691e9f1ab03a2e91be.1649168685.git.robin.murphy@arm.com
2022-05-02drm/rockchip: vop: fix possible null-ptr-deref in vop_bind()Yang Yingliang
It will cause null-ptr-deref in resource_size(), if platform_get_resource() returns NULL, move calling resource_size() after devm_ioremap_resource() that will check 'res' to avoid null-ptr-deref. Fixes: 2048e3286f34 ("drm: rockchip: Add basic drm driver") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220422032854.2995175-1-yangyingliang@huawei.com
2022-05-02drm/msm: Fix null pointer dereferences without iommuLuca Weiss
Check if 'aspace' is set before using it as it will stay null without IOMMU, such as on msm8974. Fixes: bc2112583a0b ("drm/msm/gpu: Track global faults per address-space") Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Link: https://lore.kernel.org/r/20220421203455.313523-1-luca@z3ntu.xyz Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-05-02drm/bridge: tfp410: Make tfp410_fini() return voidUwe Kleine-König
tfp410_fini() always returns zero. Make it return no value which makes it easier to see in the callers that there is no error to handle. Also the return value of i2c and platform driver remove callbacks is ignored anyway. This prepares making i2c and platform remove callbacks return void, too. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220428162803.185275-1-u.kleine-koenig@pengutronix.de
2022-05-02drm: bridge: ldb: Implement simple Freescale i.MX8MP LDB bridgeMarek Vasut
The i.MX8MP contains two syscon registers which are responsible for configuring the on-SoC DPI-to-LVDS serializer. Implement a simple bridge driver for this serializer. -- - Add sentinel of_device_table - Add RB from Sam - Rename to fsl-ldb altogether Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Peng Fan <peng.fan@nxp.com> Cc: Robby Cai <robby.cai@nxp.com> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> To: dri-devel@lists.freedesktop.org V2: - Rename syscon to fsl,syscon V3: - Consistently use MX8MP V4: - Fix MODULE_DESCRIPTION to also use MX8MP Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220426193645.244792-2-marex@denx.de
2022-05-02dt-bindings: display: bridge: ldb: Implement simple Freescale i.MX8MP LDB bridgeMarek Vasut
The i.MX8MP contains two syscon registers which are responsible for configuring the on-SoC DPI-to-LVDS serializer. Add DT binding which represents this serializer as a bridge. Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Peng Fan <peng.fan@nxp.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Robby Cai <robby.cai@nxp.com> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: devicetree@vger.kernel.org To: dri-devel@lists.freedesktop.org Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220426193645.244792-1-marex@denx.de
generated by cgit (git 2.34.1) at 2025-09-14 05:17:42 +0000