summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-11-07drm/i915: Clarify flow for disabling IRQs on stormsLyude Paul
This is rather confusing to look at as-is: dev_priv->display.hpd_irq_setup(dev_priv); in intel_hpd_irq_handler() handles disabling the actual HPD IRQ, while intel_hpd_irq_storm_disable() handles moving the HPD pin state over from MARK_DISABLED to DISABLED along with enabling polling for it. Changes since v3: - Rename i915_hpd_irq_storm_disable() to i915_hpd_irq_storm_switch_to_polling() - Rodrigo Vivi Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181106213017.14563-5-lyude@redhat.com
2018-11-07drm/i915: Fix threshold check in intel_hpd_irq_storm_detect()Lyude Paul
Currently in intel_hpd_irq_storm_detect() when we detect that the last recorded hotplug wasn't within the period defined by HPD_STORM_DETECT_DELAY, we make the mistake of resetting the HPD count to 0 without incrementing it. This results in us only enabling storm detection when we go +2 above the threshold, e.g. an HPD threshold of 5 would not trigger a storm until we reach a total of 7 hotplugs. So: rework the code a bit so we reset the HPD count when HPD_STORM_DETECT_DELAY has passed, then increment the count afterwards. Also, clean things up a bit to make it easier to undertand. Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181106213017.14563-4-lyude@redhat.com
2018-11-07drm/i915: Fix NULL deref when re-enabling HPD IRQs on systems with MSTLyude Paul
Turns out that if you trigger an HPD storm on a system that has an MST topology connected to it, you'll end up causing the kernel to eventually hit a NULL deref: [ 332.339041] BUG: unable to handle kernel NULL pointer dereference at 00000000000000ec [ 332.340906] PGD 0 P4D 0 [ 332.342750] Oops: 0000 [#1] SMP PTI [ 332.344579] CPU: 2 PID: 25 Comm: kworker/2:0 Kdump: loaded Tainted: G O 4.18.0-rc3short-hpd-storm+ #2 [ 332.346453] Hardware name: LENOVO 20BWS1KY00/20BWS1KY00, BIOS JBET71WW (1.35 ) 09/14/2018 [ 332.348361] Workqueue: events intel_hpd_irq_storm_reenable_work [i915] [ 332.350301] RIP: 0010:intel_hpd_irq_storm_reenable_work.cold.3+0x2f/0x86 [i915] [ 332.352213] Code: 00 00 ba e8 00 00 00 48 c7 c6 c0 aa 5f a0 48 c7 c7 d0 73 62 a0 4c 89 c1 4c 89 04 24 e8 7f f5 af e0 4c 8b 04 24 44 89 f8 29 e8 <41> 39 80 ec 00 00 00 0f 85 43 13 fc ff 41 0f b6 86 b8 04 00 00 41 [ 332.354286] RSP: 0018:ffffc90000147e48 EFLAGS: 00010006 [ 332.356344] RAX: 0000000000000005 RBX: ffff8802c226c9d4 RCX: 0000000000000006 [ 332.358404] RDX: 0000000000000000 RSI: 0000000000000082 RDI: ffff88032dc95570 [ 332.360466] RBP: 0000000000000005 R08: 0000000000000000 R09: ffff88031b3dc840 [ 332.362528] R10: 0000000000000000 R11: 000000031a069602 R12: ffff8802c226ca20 [ 332.364575] R13: ffff8802c2268000 R14: ffff880310661000 R15: 000000000000000a [ 332.366615] FS: 0000000000000000(0000) GS:ffff88032dc80000(0000) knlGS:0000000000000000 [ 332.368658] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 332.370690] CR2: 00000000000000ec CR3: 000000000200a003 CR4: 00000000003606e0 [ 332.372724] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 332.374773] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 332.376798] Call Trace: [ 332.378809] process_one_work+0x1a1/0x350 [ 332.380806] worker_thread+0x30/0x380 [ 332.382777] ? wq_update_unbound_numa+0x10/0x10 [ 332.384772] kthread+0x112/0x130 [ 332.386740] ? kthread_create_worker_on_cpu+0x70/0x70 [ 332.388706] ret_from_fork+0x35/0x40 [ 332.390651] Modules linked in: i915(O) vfat fat joydev btusb btrtl btbcm btintel bluetooth ecdh_generic iTCO_wdt wmi_bmof i2c_algo_bit drm_kms_helper intel_rapl syscopyarea sysfillrect x86_pkg_temp_thermal sysimgblt coretemp fb_sys_fops crc32_pclmul drm psmouse pcspkr mei_me mei i2c_i801 lpc_ich mfd_core i2c_core tpm_tis tpm_tis_core thinkpad_acpi wmi tpm rfkill video crc32c_intel serio_raw ehci_pci xhci_pci ehci_hcd xhci_hcd [last unloaded: i915] [ 332.394963] CR2: 00000000000000ec This appears to be due to the fact that with an MST topology, not all intel_connector structs will have ->encoder set. So, fix this by skipping connectors without encoders in intel_hpd_irq_storm_reenable_work(). For those wondering, this bug was found on accident while simulating HPD storms using a Chamelium connected to a ThinkPad T450s (Broadwell). Changes since v1: - Check intel_connector->mst_port instead of intel_connector->encoder Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: stable@vger.kernel.org Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181106213017.14563-3-lyude@redhat.com
2018-11-07drm/i915: Fix possible race in intel_dp_add_mst_connector()Lyude Paul
This hasn't caused any issues yet that I'm aware of, but as Ville Syrjälä pointed out - we need to make sure that intel_connector->mst_port is set before initializing MST connectors, since in theory we could potentially check intel_connector->mst_port in i915_hpd_poll_init_work() after registering the connector but before having written it's value. Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: stable@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20181106213017.14563-2-lyude@redhat.com
2018-11-07block: respect virtual boundary mask in bvecsJohannes Thumshirn
With drivers that are settting a virtual boundary constrain, we are seeing a lot of bio splitting and smaller I/Os being submitted to the driver. This happens because the bio gap detection code does not account cases where PAGE_SIZE - 1 is bigger than queue_virt_boundary() and thus will split the bio unnecessarily. Cc: Jan Kara <jack@suse.cz> Cc: Bart Van Assche <bvanassche@acm.org> Cc: Ming Lei <ming.lei@redhat.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Acked-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-07Merge tag 'hwmon-for-v4.20-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: - Remove bogus __init annotations in ibmpowernv driver - Fix double-free in error handling of __hwmon_device_register() * tag 'hwmon-for-v4.20-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (ibmpowernv) Remove bogus __init annotations hwmon: (core) Fix double-free in __hwmon_device_register()
2018-11-07Btrfs: fix missing delayed iputs on unmountOmar Sandoval
There's a race between close_ctree() and cleaner_kthread(). close_ctree() sets btrfs_fs_closing(), and the cleaner stops when it sees it set, but this is racy; the cleaner might have already checked the bit and could be cleaning stuff. In particular, if it deletes unused block groups, it will create delayed iputs for the free space cache inodes. As of "btrfs: don't run delayed_iputs in commit", we're no longer running delayed iputs after a commit. Therefore, if the cleaner creates more delayed iputs after delayed iputs are run in btrfs_commit_super(), we will leak inodes on unmount and get a busy inode crash from the VFS. Fix it by parking the cleaner before we actually close anything. Then, any remaining delayed iputs will always be handled in btrfs_commit_super(). This also ensures that the commit in close_ctree() is really the last commit, so we can get rid of the commit in cleaner_kthread(). The fstest/generic/475 followed by 476 can trigger a crash that manifests as a slab corruption caused by accessing the freed kthread structure by a wake up function. Sample trace: [ 5657.077612] BUG: unable to handle kernel NULL pointer dereference at 00000000000000cc [ 5657.079432] PGD 1c57a067 P4D 1c57a067 PUD da10067 PMD 0 [ 5657.080661] Oops: 0000 [#1] PREEMPT SMP [ 5657.081592] CPU: 1 PID: 5157 Comm: fsstress Tainted: G W 4.19.0-rc8-default+ #323 [ 5657.083703] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.2-0-gf9626cc-prebuilt.qemu-project.org 04/01/2014 [ 5657.086577] RIP: 0010:shrink_page_list+0x2f9/0xe90 [ 5657.091937] RSP: 0018:ffffb5c745c8f728 EFLAGS: 00010287 [ 5657.092953] RAX: 0000000000000074 RBX: ffffb5c745c8f830 RCX: 0000000000000000 [ 5657.094590] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff9a8747fdf3d0 [ 5657.095987] RBP: ffffb5c745c8f9e0 R08: 0000000000000000 R09: 0000000000000000 [ 5657.097159] R10: ffff9a8747fdf5e8 R11: 0000000000000000 R12: ffffb5c745c8f788 [ 5657.098513] R13: ffff9a877f6ff2c0 R14: ffff9a877f6ff2c8 R15: dead000000000200 [ 5657.099689] FS: 00007f948d853b80(0000) GS:ffff9a877d600000(0000) knlGS:0000000000000000 [ 5657.101032] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 5657.101953] CR2: 00000000000000cc CR3: 00000000684bd000 CR4: 00000000000006e0 [ 5657.103159] Call Trace: [ 5657.103776] shrink_inactive_list+0x194/0x410 [ 5657.104671] shrink_node_memcg.constprop.84+0x39a/0x6a0 [ 5657.105750] shrink_node+0x62/0x1c0 [ 5657.106529] try_to_free_pages+0x1a4/0x500 [ 5657.107408] __alloc_pages_slowpath+0x2c9/0xb20 [ 5657.108418] __alloc_pages_nodemask+0x268/0x2b0 [ 5657.109348] kmalloc_large_node+0x37/0x90 [ 5657.110205] __kmalloc_node+0x236/0x310 [ 5657.111014] kvmalloc_node+0x3e/0x70 Fixes: 30928e9baac2 ("btrfs: don't run delayed_iputs in commit") Signed-off-by: Omar Sandoval <osandov@fb.com> Reviewed-by: David Sterba <dsterba@suse.com> [ add trace ] Signed-off-by: David Sterba <dsterba@suse.com>
2018-11-07i40e: enable NETIF_F_NTUPLE and NETIF_F_HW_TC at driver loadJacob Keller
The assignment of the feature flag NETIF_F_NTUPLE and NETIF_F_HW_TC occurs prior to the initial setup of the local hw_features variable. This means the features are set as user-changeable, but are not set in the currently active feature list. This results in the features being disabled at the driver's initial load. Move the assignment after the initial assignment of hw_features, and assign to the local variable. This ensures that NETIF_F_NTUPLE and NETIF_F_HW_TC are marked as user-changeable, and also enables them by default when the driver loads. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-11-07drm/i915: Clean up skl_program_scaler()Ville Syrjälä
Remove the "sizes are 0 based" stuff that is not even true for the scaler. v2: Rebase Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181101151736.20522-1-ville.syrjala@linux.intel.com Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-11-07drm/i915: Nuke posting reads from plane update/disable funcsVille Syrjälä
No need for the posting reads in the plane update/disable hooks. If we need a posting read for something then a single one at the very end would be sufficient. We have that anyway in the form of eg. scanline/frame counter reads. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181101150605.18235-2-ville.syrjala@linux.intel.com Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-11-07i40e: restore NETIF_F_GSO_IPXIP[46] to netdev featuresJacob Keller
Since commit bacd75cfac8a ("i40e/i40evf: Add capability exchange for outer checksum", 2017-04-06) the i40e driver has not reported support for IP-in-IP offloads. This likely occurred due to a bad rebase, as the commit extracts hw_enc_features into its own variable. As part of this change, it dropped the NETIF_F_FSO_IPXIP flags from the netdev->hw_enc_features. This was unfortunately not caught during code review. Fix this by adding back the missing feature flags. For reference, NETIF_F_GSO_IPXIP4 was added in commit 7e13318daa4a ("net: define gso types for IPx over IPv4 and IPv6", 2016-05-20), replacing NETIF_F_GSO_IPIP and NETIF_F_GSO_SIT. NETIF_F_GSO_IPXIP6 was added in commit bf2d1df39502 ("intel: Add support for IPv6 IP-in-IP offload", 2016-05-20). Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-11-07ice: Change req_speeds to be u16Chinh T Cao
Since the req_speeds field in struct ice_link_status is a u8, req_speeds & ICE_AQ_LINK_SPEED_40GB always returns 0. This was caught by a coverity scan. Fix this by changing req_speeds to be u16. Reported-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Chinh T Cao <chinh.t.cao@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-11-07Merge tag 'armsoc-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "A few more fixes that have come in, and one revert of a previous fix. I was a bit too trigger happy to enable PREEMPT on multi_v7_defconfig, and it ended up regressing at least BeagleBone XM boards. While we get that debugged for next merge window, let's disable it again. Beyond that: - Stratix change to fix multicast filtering - Minor DT fixes for Renesas and i.MX - Ethernet fix for a Renesas board (switching main interfaces) - Ethernet phy regulator fix for i.MX6SX" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: arm64: dts: stratix10: fix multicast filtering ARM: defconfig: Disable PREEMPT again on multi_v7 arm64: dts: renesas: condor: switch from EtherAVB to GEther dt-bindings: arm: Fix RZ/G2E part number arm64: dts: renesas: r8a7795: add missing dma-names on hscif2 ARM: dts: imx6sx-sdb: Fix enet phy regulator ARM: dts: fsl: Fix improperly quoted stdout-path values ARM: dts: imx6sll: fix typo for fsl,imx6sll-i2c node
2018-11-07Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID fixes from Jiri Kosina: - hid.git is moving towards group maintainership (where group is myself and Benjamin Tissoires), therefore this pull request updates MAINTAINERS accordingly - fix for hid-asus config dependency from Arnd Bergmann - two device-specific quirks for i2c-hid from Julian Sax and Kai-Heng Feng - other few small assorted fixes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: fix up .raw_event() documentation HID: asus: fix build warning wiht CONFIG_ASUS_WMI disabled HID: i2c-hid: add Direkt-Tek DTLAPY133-1 to descriptor override HID: moving to group maintainership model HID: alps: allow incoming reports when only the trackstick is opened Revert "HID: add NOGET quirk for Eaton Ellipse MAX UPS" HID: i2c-hid: Add a small delay after sleep command for Raydium touchpanel HID: hiddev: fix potential Spectre v1
2018-11-07ext4: fix buffer leak in ext4_expand_extra_isize_ea() on error pathVasily Averin
Fixes: de05ca852679 ("ext4: move call to ext4_error() into ...") Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org # 4.17
2018-11-07rtc: pcf2127: fix a kmemleak caused in pcf2127_i2c_gather_writeXulin Sun
pcf2127_i2c_gather_write() allocates memory as local variable for i2c_master_send(), after finishing the master transfer, the allocated memory should be freed. The kmemleak is reported: unreferenced object 0xffff80231e7dba80 (size 64): comm "hwclock", pid 27762, jiffies 4296880075 (age 356.944s) hex dump (first 32 bytes): 03 00 12 03 19 02 11 13 00 80 98 18 00 00 ff ff ................ 00 50 00 00 00 00 00 00 02 00 00 00 00 00 00 00 .P.............. backtrace: [<ffff000008221398>] create_object+0xf8/0x278 [<ffff000008a96264>] kmemleak_alloc+0x74/0xa0 [<ffff00000821070c>] __kmalloc+0x1ac/0x348 [<ffff0000087ed1dc>] pcf2127_i2c_gather_write+0x54/0xf8 [<ffff0000085fd9d4>] _regmap_raw_write+0x464/0x850 [<ffff0000085fe3f4>] regmap_bulk_write+0x1a4/0x348 [<ffff0000087ed32c>] pcf2127_rtc_set_time+0xac/0xe8 [<ffff0000087eaad8>] rtc_set_time+0x80/0x138 [<ffff0000087ebfb0>] rtc_dev_ioctl+0x398/0x610 [<ffff00000823f2c0>] do_vfs_ioctl+0xb0/0x848 [<ffff00000823fae4>] SyS_ioctl+0x8c/0xa8 [<ffff000008083ac0>] el0_svc_naked+0x34/0x38 [<ffffffffffffffff>] 0xffffffffffffffff Signed-off-by: Xulin Sun <xulin.sun@windriver.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-11-07rtc: hctosys: Add missing range error reportingMaciej W. Rozycki
Fix an issue with the 32-bit range error path in `rtc_hctosys' where no error code is set and consequently the successful preceding call result from `rtc_read_time' is propagated to `rtc_hctosys_ret'. This in turn makes any subsequent call to `hctosys_show' incorrectly report in sysfs that the system time has been set from this RTC while it has not. Set the error to ERANGE then if we can't express the result due to an overflow. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Fixes: b3a5ac42ab18 ("rtc: hctosys: Ensure system time doesn't overflow time_t") Cc: stable@vger.kernel.org # 4.17+ Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-11-07rtc: cmos: Do not export alarm rtc_ops when we do not support alarmsHans de Goede
When there is no IRQ configured for the RTC, the rtc-cmos code does not support alarms, all alarm rtc_ops fail with -EIO / -EINVAL. The rtc-core expects a rtc driver which does not support rtc alarms to not have alarm ops at all. Otherwise the wakealarm sysfs attr will read as empty rather then returning an error, making it impossible for userspace to find out beforehand if alarms are supported. A system without an IRQ for the RTC before this patch: [root@localhost ~]# cat /sys/class/rtc/rtc0/wakealarm [root@localhost ~]# After this patch: [root@localhost ~]# cat /sys/class/rtc/rtc0/wakealarm cat: /sys/class/rtc/rtc0/wakealarm: No such file or directory [root@localhost ~]# This fixes gnome-session + systemd trying to use suspend-then-hibernate, which causes systemd to abort the suspend when writing the RTC alarm fails. BugLink: https://github.com/systemd/systemd/issues/9988 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-11-07ext4: fix buffer leak in ext4_xattr_move_to_block() on error pathVasily Averin
Fixes: 3f2571c1f91f ("ext4: factor out xattr moving") Fixes: 6dd4ee7cab7e ("ext4: Expand extra_inodes space per ...") Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org # 2.6.23
2018-11-07Merge tag 'stratix10_dts_fix_for_v4.20' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into fixes ARM: dts: stratix10: fix multicast filtering On Stratix 10, the EMAC has 256 hash buckets for multicast filtering. This needs to be specified in DTS, otherwise the stmmac driver defaults to 64 buckets and initializes the filter incorrectly. As a result, e.g. valid IPv6 multicast traffic ends up being dropped. * tag 'stratix10_dts_fix_for_v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: arm64: dts: stratix10: fix multicast filtering Signed-off-by: Olof Johansson <olof@lixom.net>
2018-11-07ext4: release bs.bh before re-using in ext4_xattr_block_find()Vasily Averin
bs.bh was taken in previous ext4_xattr_block_find() call, it should be released before re-using Fixes: 7e01c8e5420b ("ext3/4: fix uninitialized bs in ...") Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org # 2.6.26
2018-11-07ext4: fix buffer leak in ext4_xattr_get_block() on error pathVasily Averin
Fixes: dec214d00e0d ("ext4: xattr inode deduplication") Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org # 4.13
2018-11-07Merge tag 'renesas-fixes-for-v4.20' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes Renesas ARM Based SoC Fixes for v4.20 * R-Car V3H (r8a77980) based Condor board - Switch from EtherAVB to GEther to match offical boards * RZ/G2E (ra8774c0) SoC: correct documentation of part number * R-Car H3 (r8a7795) SoC: reinstate all DMA channels on HSCIF2 * tag 'renesas-fixes-for-v4.20' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: arm64: dts: renesas: condor: switch from EtherAVB to GEther dt-bindings: arm: Fix RZ/G2E part number arm64: dts: renesas: r8a7795: add missing dma-names on hscif2 Signed-off-by: Olof Johansson <olof@lixom.net>
2018-11-07ext4: fix possible leak of s_journal_flag_rwsem in error pathVasily Averin
Fixes: c8585c6fcaf2 ("ext4: fix races between changing inode journal ...") Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org # 4.7
2018-11-07resource/docs: Complete kernel-doc style function documentationBorislav Petkov
Add the missing kernel-doc style function parameters documentation. Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: akpm@linux-foundation.org Cc: linux-tip-commits@vger.kernel.org Cc: rdunlap@infradead.org Fixes: b69c2e20f6e4 ("resource: Clean it up a bit") Link: http://lkml.kernel.org/r/20181105093307.GA12445@zn.tnic Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-11-07ext4: fix possible leak of sbi->s_group_desc_leak in error pathTheodore Ts'o
Fixes: bfe0a5f47ada ("ext4: add more mount time checks of the superblock") Reported-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org # 4.18
2018-11-07drm/i915/csr: fix spelling mistake "firmare" -> "firmware"Colin Ian King
Trivial fix to spelling mistake in DRM_INFO message Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20181107102211.19758-1-colin.king@canonical.com
2018-11-07drm/i915/ringbuffer: Delay after EMIT_INVALIDATE for gen4/gen5Chris Wilson
Exercising the gpu reloc path strenuously revealed an issue where the updated relocations (from MI_STORE_DWORD_IMM) were not being observed upon execution. After some experiments with adding pipecontrols (a lot of pipecontrols (32) as gen4/5 do not have a bit to wait on earlier pipe controls or even the current on), it was discovered that we merely needed to delay the EMIT_INVALIDATE by several flushes. It is important to note that it is the EMIT_INVALIDATE as opposed to the EMIT_FLUSH that needs the delay as opposed to what one might first expect -- that the delay is required for the TLB invalidation to take effect (one presumes to purge any CS buffers) as opposed to a delay after flushing to ensure the writes have landed before triggering invalidation. Testcase: igt/gem_tiled_fence_blits Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@vger.kernel.org Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181105094305.5767-1-chris@chris-wilson.co.uk
2018-11-07mm, drm/i915: mark pinned shmemfs pages as unevictableKuo-Hsin Yang
The i915 driver uses shmemfs to allocate backing storage for gem objects. These shmemfs pages can be pinned (increased ref count) by shmem_read_mapping_page_gfp(). When a lot of pages are pinned, vmscan wastes a lot of time scanning these pinned pages. In some extreme case, all pages in the inactive anon lru are pinned, and only the inactive anon lru is scanned due to inactive_ratio, the system cannot swap and invokes the oom-killer. Mark these pinned pages as unevictable to speed up vmscan. Export pagevec API check_move_unevictable_pages(). This patch was inspired by Chris Wilson's change [1]. [1]: https://patchwork.kernel.org/patch/9768741/ Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Dave Hansen <dave.hansen@intel.com> Signed-off-by: Kuo-Hsin Yang <vovoy@chromium.org> Acked-by: Michal Hocko <mhocko@suse.com> # mm part Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Dave Hansen <dave.hansen@intel.com> Acked-by: Andrew Morton <akpm@linux-foundation.org> Link: https://patchwork.freedesktop.org/patch/msgid/20181106132324.17390-1-chris@chris-wilson.co.uk Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2018-11-07Merge tag 'gvt-fixes-2018-11-07' of https://github.com/intel/gvt-linux into ↵Joonas Lahtinen
drm-intel-fixes gvt-fixes-2018-11-07 - Fix invalidate of old ggtt entry (Hang) - Fix partial ggtt entry update in any order (Hang) - Fix one mask setting for chicken reg (Xinyun) - Fix eDP warning in guest (Longhe) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> From: Zhenyu Wang <zhenyuw@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181107023137.GO25194@zhen-hp.sh.intel.com
2018-11-07Documentation: cpufreq: Correct a typoZhao Wei Liew
Fix a typo in the admin-guide documentation for cpufreq. Signed-off-by: Zhao Wei Liew <zhaoweiliew@gmail.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-11-07cpufreq: imx6q: add return value check for voltage scaleAnson Huang
Add return value check for voltage scale when ARM clock rate change fail. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-11-07Documentation: cpu-freq: Frequencies aren't always sortedViresh Kumar
The order in which the frequencies are displayed in cpufreq stats depends on the order in which the frequencies were sorted in the frequency table provided to cpufreq core by the cpufreq driver. They can be completely unsorted as well. The documentation's claim that the stats will be sorted in descending order is hence incorrect and here is an attempt to fix it. Reported-by: Pavel <pavel2000@ngs.ru> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-11-07KVM: PPC: Move and undef TRACE_INCLUDE_PATH/FILEScott Wood
TRACE_INCLUDE_PATH and TRACE_INCLUDE_FILE are used by <trace/define_trace.h>, so like that #include, they should be outside #ifdef protection. They also need to be #undefed before defining, in case multiple trace headers are included by the same C file. This became the case on book3e after commit cf4a6085151a ("powerpc/mm: Add missing tracepoint for tlbie"), leading to the following build error: CC arch/powerpc/kvm/powerpc.o In file included from arch/powerpc/kvm/powerpc.c:51:0: arch/powerpc/kvm/trace.h:9:0: error: "TRACE_INCLUDE_PATH" redefined [-Werror] #define TRACE_INCLUDE_PATH . ^ In file included from arch/powerpc/kvm/../mm/mmu_decl.h:25:0, from arch/powerpc/kvm/powerpc.c:48: ./arch/powerpc/include/asm/trace.h:224:0: note: this is the location of the previous definition #define TRACE_INCLUDE_PATH asm ^ cc1: all warnings being treated as errors Reported-by: Christian Zigotzky <chzigotzky@xenosoft.de> Signed-off-by: Scott Wood <oss@buserror.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-11-06scsi: qla2xxx: Initialize port speed to avoid setting lower speedQuinn Tran
This patch initializes port speed so that firmware does not set lower operating speed. Setting lower speed in firmware impacts WRITE perfomance. Fixes: 726b85487067 ("qla2xxx: Add framework for async fabric discovery") Cc: <stable@vger.kernel.org> Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Tested-by: Laurence Oberman <loberman@redhat.com> Reviewed-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-11-06Revert "scsi: ufs: Disable blk-mq for now"Martin K. Petersen
This reverts commit d87161bea405e3260377026ca8a704a3f68bd67a. The issues that forced us to disable blk_mq for ufs have been resolved. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-11-07Merge tag 'exynos-drm-fixes-for-v4.20-rc2' of ↵Dave Airlie
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes Three regressions - Revert frame counter support . This patch fixes a issue which doesn't work extension and clone mode because some CRTC devices don't provide frame counter value properly. - Fix lack of fbdev on Rinato and trats boards. . This patch considers for connector to be registered by DSI after DRM device is registered, and also it makes fbdev initializaion to be done even if no connector at the moment. - Check for dsi->panel object correctly . This patch fixes checking for dsi->panel. of_drm_find_panel function returns panel object or error value so error value should be checked using IS_ERR macro. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Inki Dae <inki.dae@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/1541407733-7632-1-git-send-email-inki.dae@samsung.com
2018-11-07Merge branch 'etnaviv/fixes' of https://git.pengutronix.de/git/lst/linux ↵Dave Airlie
into drm-fixes Single etnaviv fence fix for GPU recovery. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Lucas Stach <l.stach@pengutronix.de> Link: https://patchwork.freedesktop.org/patch/msgid/1541522424.2508.26.camel@pengutronix.de
2018-11-06ext4: remove unneeded brelse call in ext4_xattr_inode_update_ref()Vasily Averin
Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2018-11-06ext4: avoid possible double brelse() in add_new_gdb() on error pathTheodore Ts'o
Fixes: b40971426a83 ("ext4: add error checking to calls to ...") Reported-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org # 2.6.38
2018-11-06ext4: avoid buffer leak in ext4_orphan_add() after prior errorsVasily Averin
Fixes: d745a8c20c1f ("ext4: reduce contention on s_orphan_lock") Fixes: 6e3617e579e0 ("ext4: Handle non empty on-disk orphan link") Cc: Dmitry Monakhov <dmonakhov@gmail.com> Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org # 2.6.34
2018-11-06ext4: avoid buffer leak on shutdown in ext4_mark_iloc_dirty()Vasily Averin
ext4_mark_iloc_dirty() callers expect that it releases iloc->bh even if it returns an error. Fixes: 0db1ff222d40 ("ext4: add shutdown bit and check for it") Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org # 4.11
2018-11-06drm/amdgpu/display/dce11: only enable FBC when selectedAlex Deucher
Causes a black screen on a Stoney laptop. Bug: https://bugs.freedesktop.org/show_bug.cgi?id=108577 Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-06drm/amdgpu/display/dm: handle FBC dc feature parameterAlex Deucher
Set the dc_config properly when the option is enabled. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-06drm/amdgpu/display/dc: add FBC to dc_configAlex Deucher
Add FBC to the list of features that can be enabled from the DM. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-06drm/amdgpu: add DC feature mask module parameterAlex Deucher
Similar to ppfeaturemask. Allows you to selectively enable/disable DC features. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-06drm/amdgpu/display: check if fbc is available in set_static_screen_control (v2)Alex Deucher
The value is dependent on whether fbc is available. v2: only check if num_pipes is valid Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-06drm/amdgpu/vega20: add CLK base offsetAlex Deucher
In case we need to access CLK registers. Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-06drm/amd/display: Stop leaking planesHarry Wentland
[Why] drm_plane_cleanup does not free the plane. [How] Call drm_primary_helper_destroy which will also free the plane. Signed-off-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-06drm/amd/display: Fix misleading buffer informationShaokun Zhang
RETIMER_REDRIVER_INFO shows the buffer as a decimal value with a '0x' prefix, which is somewhat misleading. Fix it to print hexadecimal, as was intended. Fixes: 2f14bc89("drm/amd/display: add retimer log for HWQ tuning use.") Cc: Charlene Liu <charlene.liu@amd.com> Cc: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com> Reviewed-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit (git 2.34.1) at 2025-09-13 16:22:49 +0000