summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-07-17usb: gadget: u_audio: remove cached period bytes valueVladimir Zapolskiy
Substream period size potentially can be changed in runtime, however this is not accounted in the data copying routine, the change replaces the cached value with an actual value from substream runtime. As a side effect the change also removes a potential division by zero in u_audio_iso_complete() function, if there is a race with uac_pcm_hw_free(), which sets prm->period_size to 0. Fixes: 132fcb460839 ("usb: gadget: Add Audio Class 2.0 Driver") Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-07-17usb: gadget: u_audio: remove caching of stream buffer parametersVladimir Zapolskiy
There is no necessity to copy PCM stream ring buffer area and size properties to UAC private data structure, these values can be got from substream itself. The change gives more control on substream and avoid stale caching. Fixes: 132fcb460839 ("usb: gadget: Add Audio Class 2.0 Driver") Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-07-17usb: gadget: u_audio: update hw_ptr in iso_complete after data copiedJoshua Frkuska
In u_audio_iso_complete, the runtime hw_ptr is updated before the data is actually copied over to/from the buffer/dma area. When ALSA uses this hw_ptr, the data may not actually be available to be used. This causes trash/stale audio to play/record. This patch updates the hw_ptr after the data has been copied to avoid this. Fixes: 132fcb460839 ("usb: gadget: Add Audio Class 2.0 Driver") Signed-off-by: Joshua Frkuska <joshua_frkuska@mentor.com> Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-07-17usb: gadget: u_audio: fix pcm/card naming in g_audio_setup()Eugeniu Rosca
Fix below smatch (v0.5.0-4443-g69e9094e11c1) warnings: drivers/usb/gadget/function/u_audio.c:607 g_audio_setup() warn: strcpy() 'pcm_name' of unknown size might be too large for 'pcm->name' drivers/usb/gadget/function/u_audio.c:614 g_audio_setup() warn: strcpy() 'card_name' of unknown size might be too large for 'card->driver' drivers/usb/gadget/function/u_audio.c:615 g_audio_setup() warn: strcpy() 'card_name' of unknown size might be too large for 'card->shortname' Below commits performed a similar 's/strcpy/strlcpy/' rework: * v2.6.31 commit 8372d4980fbc ("ALSA: ctxfi - Fix PCM device naming") * v4.14 commit 003d3e70dbeb ("ALSA: ad1848: fix format string overflow warning") * v4.14 commit 6d8b04de87e1 ("ALSA: cs423x: fix format string overflow warning") Fixes: eb9fecb9e69b ("usb: gadget: f_uac2: split out audio core") Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-07-17usb: gadget: f_uac2: fix error handling in afunc_bind (again)Eugeniu Rosca
If usb_ep_autoconfig() fails (i.e. returns a null endpoint descriptor), we expect afunc_bind() to fail (i.e. return a negative error code). However, due to v4.10-rc1 commit f1d3861d63a5 ("usb: gadget: f_uac2: fix error handling at afunc_bind"), afunc_bind() returns zero, telling the caller that it succeeded. This then generates NULL pointer dereference in below scenario on Rcar H3-ES20-Salvator-X target: rcar-gen3:/home/root# modprobe g_audio [ 626.521155] g_audio gadget: afunc_bind:565 Error! [ 626.526319] g_audio gadget: Linux USB Audio Gadget, version: Feb 2, 2012 [ 626.533405] g_audio gadget: g_audio ready rcar-gen3:/home/root# rcar-gen3:/home/root# modprobe -r g_audio [ 728.256707] ================================================================== [ 728.264293] BUG: KASAN: null-ptr-deref in u_audio_stop_capture+0x70/0x268 [u_audio] [ 728.272244] Read of size 8 at addr 00000000000000a0 by task modprobe/2545 [ 728.279309] [ 728.280849] CPU: 0 PID: 2545 Comm: modprobe Tainted: G WC 4.14.47+ #152 [ 728.288778] Hardware name: Renesas Salvator-X board based on r8a7795 ES2.0+ (DT) [ 728.296454] Call trace: [ 728.299151] [<ffff2000080925ac>] dump_backtrace+0x0/0x364 [ 728.304808] [<ffff200008092924>] show_stack+0x14/0x1c [ 728.310081] [<ffff200008f8d5cc>] dump_stack+0x108/0x174 [ 728.315522] [<ffff2000083c77c8>] kasan_report+0x1fc/0x354 [ 728.321134] [<ffff2000083c611c>] __asan_load8+0x24/0x94 [ 728.326600] [<ffff2000021e1618>] u_audio_stop_capture+0x70/0x268 [u_audio] [ 728.333735] [<ffff2000021f8b7c>] afunc_disable+0x44/0x60 [usb_f_uac2] [ 728.340503] [<ffff20000218177c>] usb_remove_function+0x9c/0x210 [libcomposite] [ 728.348060] [<ffff200002183320>] remove_config.isra.2+0x1d8/0x218 [libcomposite] [ 728.355788] [<ffff200002186c54>] __composite_unbind+0x104/0x1f8 [libcomposite] [ 728.363339] [<ffff200002186d58>] composite_unbind+0x10/0x18 [libcomposite] [ 728.370536] [<ffff20000152f158>] usb_gadget_remove_driver+0xc0/0x170 [udc_core] [ 728.378172] [<ffff20000153154c>] usb_gadget_unregister_driver+0x1cc/0x258 [udc_core] [ 728.386274] [<ffff200002180de8>] usb_composite_unregister+0x10/0x18 [libcomposite] [ 728.394116] [<ffff2000021d035c>] audio_driver_exit+0x14/0x28 [g_audio] [ 728.400878] [<ffff200008213ed4>] SyS_delete_module+0x288/0x32c [ 728.406935] Exception stack(0xffff8006cf6c7ec0 to 0xffff8006cf6c8000) [ 728.413624] 7ec0: 0000000006136428 0000000000000800 0000000000000000 0000ffffd706efe8 [ 728.421718] 7ee0: 0000ffffd706efe9 000000000000000a 1999999999999999 0000000000000000 [ 728.429792] 7f00: 000000000000006a 000000000042c078 0000000000000000 0000000000000005 [ 728.437870] 7f20: 0000000000000000 0000000000000000 0000000000000004 0000000000000000 [ 728.445952] 7f40: 000000000042bfc8 0000ffffbc7c8f40 0000000000000000 00000000061363c0 [ 728.454035] 7f60: 0000000006136428 0000000000000000 0000000000000000 0000000006136428 [ 728.462114] 7f80: 000000000042c000 0000ffffd7071448 000000000042c000 0000000000000000 [ 728.470190] 7fa0: 00000000061350c0 0000ffffd7070010 000000000041129c 0000ffffd7070010 [ 728.478281] 7fc0: 0000ffffbc7c8f48 0000000060000000 0000000006136428 000000000000006a [ 728.486351] 7fe0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 728.494434] [<ffff200008084780>] el0_svc_naked+0x34/0x38 [ 728.499957] ================================================================== [ 728.507801] Unable to handle kernel NULL pointer dereference at virtual address 000000a0 [ 728.517742] Mem abort info: [ 728.520993] Exception class = DABT (current EL), IL = 32 bits [ 728.527375] SET = 0, FnV = 0 [ 728.530731] EA = 0, S1PTW = 0 [ 728.534361] Data abort info: [ 728.537650] ISV = 0, ISS = 0x00000006 [ 728.541863] CM = 0, WnR = 0 [ 728.545167] user pgtable: 4k pages, 48-bit VAs, pgd = ffff8006c6100000 [ 728.552156] [00000000000000a0] *pgd=0000000716a8d003 [ 728.557519] , *pud=00000007116fc003 [ 728.561259] , *pmd=0000000000000000 [ 728.564985] Internal error: Oops: 96000006 [#1] PREEMPT SMP [ 728.570815] Modules linked in: [ 728.574023] usb_f_uac2 [ 728.576560] u_audio [ 728.578827] g_audio(-) [ 728.581361] libcomposite [ 728.584071] configfs [ 728.586428] aes_ce_blk [ 728.588960] sata_rcar [ 728.591421] crypto_simd [ 728.594039] cryptd [ 728.596217] libata [ 728.598396] aes_ce_cipher [ 728.601188] crc32_ce [ 728.603542] ghash_ce [ 728.605896] gf128mul [ 728.608250] aes_arm64 [ 728.610692] scsi_mod [ 728.613046] sha2_ce [ 728.615313] xhci_plat_hcd [ 728.618106] sha256_arm64 [ 728.620811] sha1_ce [ 728.623077] renesas_usbhs [ 728.625869] xhci_hcd [ 728.628243] renesas_usb3 [ 728.630948] sha1_generic [ 728.633670] ravb_streaming(C) [ 728.636814] udc_core [ 728.639168] cpufreq_dt [ 728.641697] rcar_gen3_thermal [ 728.644840] usb_dmac [ 728.647194] pwm_rcar [ 728.649548] thermal_sys [ 728.652165] virt_dma [ 728.654519] mch_core(C) [ 728.657137] pwm_bl [ 728.659315] snd_soc_rcar [ 728.662020] snd_aloop [ 728.664462] snd_soc_generic_card [ 728.667869] snd_soc_ak4613 [ 728.670749] ipv6 [ 728.672768] autofs4 [ 728.675052] CPU: 0 PID: 2545 Comm: modprobe Tainted: G B WC 4.14.47+ #152 [ 728.682973] Hardware name: Renesas Salvator-X board based on r8a7795 ES2.0+ (DT) [ 728.690637] task: ffff8006ced38000 task.stack: ffff8006cf6c0000 [ 728.696814] PC is at u_audio_stop_capture+0x70/0x268 [u_audio] [ 728.702896] LR is at u_audio_stop_capture+0x70/0x268 [u_audio] [ 728.708964] pc : [<ffff2000021e1618>] lr : [<ffff2000021e1618>] pstate: 60000145 [ 728.716620] sp : ffff8006cf6c7a50 [ 728.720154] x29: ffff8006cf6c7a50 [ 728.723760] x28: ffff8006ced38000 [ 728.727272] x27: ffff200008fd7000 [ 728.730857] x26: ffff2000021d2340 [ 728.734361] x25: 0000000000000000 [ 728.737948] x24: ffff200009e94b08 [ 728.741452] x23: 00000000000000a0 [ 728.745052] x22: 00000000000000a8 [ 728.748558] x21: 1ffff000d9ed8f7c [ 728.752142] x20: ffff8006d671a800 [ 728.755646] x19: 0000000000000000 [ 728.759231] x18: 0000000000000000 [ 728.762736] x17: 0000ffffbc7c8f40 [ 728.766320] x16: ffff200008213c4c [ 728.769823] x15: 0000000000000000 [ 728.773408] x14: 0720072007200720 [ 728.776912] x13: 0720072007200720 [ 728.780497] x12: ffffffffffffffff [ 728.784001] x11: 0000000000000040 [ 728.787598] x10: 0000000000001600 [ 728.791103] x9 : ffff8006cf6c77a0 [ 728.794689] x8 : ffff8006ced39660 [ 728.798193] x7 : ffff20000811c738 [ 728.801794] x6 : 0000000000000000 [ 728.805299] x5 : dfff200000000000 [ 728.808885] x4 : ffff8006ced38000 [ 728.812390] x3 : ffff200008fb46e8 [ 728.815976] x2 : 0000000000000007 [ 728.819480] x1 : 3ba68643e7431500 [ 728.823066] x0 : 0000000000000000 [ 728.826574] Process modprobe (pid: 2545, stack limit = 0xffff8006cf6c0000) [ 728.833704] Call trace: [ 728.836292] Exception stack(0xffff8006cf6c7910 to 0xffff8006cf6c7a50) [ 728.842987] 7900: 0000000000000000 3ba68643e7431500 [ 728.851084] 7920: 0000000000000007 ffff200008fb46e8 ffff8006ced38000 dfff200000000000 [ 728.859173] 7940: 0000000000000000 ffff20000811c738 ffff8006ced39660 ffff8006cf6c77a0 [ 728.867248] 7960: 0000000000001600 0000000000000040 ffffffffffffffff 0720072007200720 [ 728.875323] 7980: 0720072007200720 0000000000000000 ffff200008213c4c 0000ffffbc7c8f40 [ 728.883412] 79a0: 0000000000000000 0000000000000000 ffff8006d671a800 1ffff000d9ed8f7c [ 728.891485] 79c0: 00000000000000a8 00000000000000a0 ffff200009e94b08 0000000000000000 [ 728.899561] 79e0: ffff2000021d2340 ffff200008fd7000 ffff8006ced38000 ffff8006cf6c7a50 [ 728.907636] 7a00: ffff2000021e1618 ffff8006cf6c7a50 ffff2000021e1618 0000000060000145 [ 728.915710] 7a20: 0000000000000008 0000000000000000 0000ffffffffffff 3ba68643e7431500 [ 728.923780] 7a40: ffff8006cf6c7a50 ffff2000021e1618 [ 728.928880] [<ffff2000021e1618>] u_audio_stop_capture+0x70/0x268 [u_audio] [ 728.936032] [<ffff2000021f8b7c>] afunc_disable+0x44/0x60 [usb_f_uac2] [ 728.942822] [<ffff20000218177c>] usb_remove_function+0x9c/0x210 [libcomposite] [ 728.950385] [<ffff200002183320>] remove_config.isra.2+0x1d8/0x218 [libcomposite] [ 728.958134] [<ffff200002186c54>] __composite_unbind+0x104/0x1f8 [libcomposite] [ 728.965689] [<ffff200002186d58>] composite_unbind+0x10/0x18 [libcomposite] [ 728.972882] [<ffff20000152f158>] usb_gadget_remove_driver+0xc0/0x170 [udc_core] [ 728.980522] [<ffff20000153154c>] usb_gadget_unregister_driver+0x1cc/0x258 [udc_core] [ 728.988638] [<ffff200002180de8>] usb_composite_unregister+0x10/0x18 [libcomposite] [ 728.996472] [<ffff2000021d035c>] audio_driver_exit+0x14/0x28 [g_audio] [ 729.003231] [<ffff200008213ed4>] SyS_delete_module+0x288/0x32c [ 729.009278] Exception stack(0xffff8006cf6c7ec0 to 0xffff8006cf6c8000) [ 729.015946] 7ec0: 0000000006136428 0000000000000800 0000000000000000 0000ffffd706efe8 [ 729.024022] 7ee0: 0000ffffd706efe9 000000000000000a 1999999999999999 0000000000000000 [ 729.032099] 7f00: 000000000000006a 000000000042c078 0000000000000000 0000000000000005 [ 729.040172] 7f20: 0000000000000000 0000000000000000 0000000000000004 0000000000000000 [ 729.048263] 7f40: 000000000042bfc8 0000ffffbc7c8f40 0000000000000000 00000000061363c0 [ 729.056337] 7f60: 0000000006136428 0000000000000000 0000000000000000 0000000006136428 [ 729.064411] 7f80: 000000000042c000 0000ffffd7071448 000000000042c000 0000000000000000 [ 729.072484] 7fa0: 00000000061350c0 0000ffffd7070010 000000000041129c 0000ffffd7070010 [ 729.080563] 7fc0: 0000ffffbc7c8f48 0000000060000000 0000000006136428 000000000000006a [ 729.088636] 7fe0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 729.096733] [<ffff200008084780>] el0_svc_naked+0x34/0x38 [ 729.102259] Code: 9597d1b3 aa1703e0 9102a276 958792b9 (f9405275) [ 729.108617] ---[ end trace 7560c5fa3d100243 ]--- After this patch is applied, the issue is fixed: rcar-gen3:/home/root# modprobe g_audio [ 59.217127] g_audio gadget: afunc_bind:565 Error! [ 59.222329] g_audio ee020000.usb: failed to start g_audio: -19 modprobe: ERROR: could not insert 'g_audio': No such device rcar-gen3:/home/root# modprobe -r g_audio rcar-gen3:/home/root# Fixes: f1d3861d63a5 ("usb: gadget: f_uac2: fix error handling at afunc_bind") Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-07-17usb: gadget: r8a66597: Fix a possible sleep-in-atomic-context bugs in ↵Jia-Ju Bai
r8a66597_queue() The driver may sleep in an interrupt handler. The function call path (from bottom to top) in Linux-4.16.7 is: [FUNC] r8a66597_queue(GFP_KERNEL) drivers/usb/gadget/udc/r8a66597-udc.c, 1193: r8a66597_queue in get_status drivers/usb/gadget/udc/r8a66597-udc.c, 1301: get_status in setup_packet drivers/usb/gadget/udc/r8a66597-udc.c, 1381: setup_packet in irq_control_stage drivers/usb/gadget/udc/r8a66597-udc.c, 1508: irq_control_stage in r8a66597_irq (interrupt handler) To fix this bug, GFP_KERNEL is replaced with GFP_ATOMIC. This bug is found by my static analysis tool (DSAC-2) and checked by my code review. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-07-17usb: gadget: r8a66597: Fix two possible sleep-in-atomic-context bugs in ↵Jia-Ju Bai
init_controller() The driver may sleep with holding a spinlock. The function call paths (from bottom to top) in Linux-4.16.7 are: [FUNC] msleep drivers/usb/gadget/udc/r8a66597-udc.c, 839: msleep in init_controller drivers/usb/gadget/udc/r8a66597-udc.c, 96: init_controller in r8a66597_usb_disconnect drivers/usb/gadget/udc/r8a66597-udc.c, 93: spin_lock in r8a66597_usb_disconnect [FUNC] msleep drivers/usb/gadget/udc/r8a66597-udc.c, 835: msleep in init_controller drivers/usb/gadget/udc/r8a66597-udc.c, 96: init_controller in r8a66597_usb_disconnect drivers/usb/gadget/udc/r8a66597-udc.c, 93: spin_lock in r8a66597_usb_disconnect To fix these bugs, msleep() is replaced with mdelay(). This bug is found by my static analysis tool (DSAC-2) and checked by my code review. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-07-17usb: gadget: Fix OS descriptors supportBenjamin Herrenschmidt
The current code is broken as it re-defines "req" inside the if block, then goto out of it. Thus the request that ends up being sent is not the one that was populated by the code in question. This fixes RNDIS driver autodetect by Windows 10 for me. The bug was introduced by Chris rework to remove the local queuing inside the if { } block of the redefined request. Fixes: 636ba13aec8a ("usb: gadget: composite: remove duplicated code in OS desc handling") Cc: <stable@vger.kernel.org> # v4.17 Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-07-17usb: gadget: aspeed-vhub: Fix SETUP packets with OUT data phaseBenjamin Herrenschmidt
A couple of bugs in the driver are preventing SETUP packets with an OUT data phase from working properly. Interestingly those are incredibly rare (RNDIS typically uses them and thus is broken without this fix). The main problem was an incorrect register offset being applied for arming RX on EP0. The other problem relates to stalling such a packet before the data phase, in which case we don't get an ACK cycle, and get the next SETUP packet directly, so we shouldn't reject it. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-07-16ARM: dts: omap4-droid4: fix dts w.r.t. pwmPavel Machek
pwm node should not be under gpio6 node in the device tree. This fixes detection of the pwm on Droid 4. Fixes: 6d7bdd328da4 ("ARM: dts: omap4-droid4: update touchscreen") Signed-off-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> [tony@atomide.com: added fixes tag] Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-07-16drm/amdkfd: Call kfd2kgd.set_compute_idleFelix Kuehling
User mode queue submissions don't go through KFD. Therefore we don't know exactly when compute is idle or not idle. We use the existence of user mode queues on a device as an approximation. register_process is called when the first queue of a process is created. Conversely unregister_process is called when the last queue is destroyed. The first process that is registered takes compute out of idle. The last process that is unregisters sets compute back to idle. Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Eric Huang <JinHuiEric.Huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2018-07-16drm/amdgpu: Add kfd2kgd.set_compute_idle interfaceFelix Kuehling
This allows automatic switching to the compute power profile depending on compute activity. Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Eric Huang <JinHuiEric.Huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2018-07-16net/smc: take sock lock in smc_ioctl()Ursula Braun
SMC ioctl processing requires the sock lock to work properly in all thinkable scenarios. Problem has been found with RaceFuzzer and fixes: KASAN: null-ptr-deref Read in smc_ioctl Reported-by: Byoungyoung Lee <lifeasageek@gmail.com> Reported-by: syzbot+35b2c5aa76fd398b9fd4@syzkaller.appspotmail.com Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-16Merge branch 'tg3-fixes'David S. Miller
Siva Reddy Kallam says: ==================== tg3: Update copyright and fix for tx timeout with 5762 First patch: Update copyright Second patch: Add higher cpu clock for 5762 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-16tg3: Add higher cpu clock for 5762.Sanjeev Bansal
This patch has fix for TX timeout while running bi-directional traffic with 100 Mbps using 5762. Signed-off-by: Sanjeev Bansal <sanjeevb.bansal@broadcom.com> Signed-off-by: Siva Reddy Kallam <siva.kallam@broadcom.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-16tg3: Update copyrightSiva Reddy Kallam
Signed-off-by: Siva Reddy Kallam <siva.kallam@broadcom.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-16ibmvnic: Fix error recovery on login failureJohn Allen
Testing has uncovered a failure case that is not handled properly. In the event that a login fails and we are not able to recover on the spot, we return 0 from do_reset, preventing any error recovery code from being triggered. Additionally, the state is set to "probed" meaning that when we are able to trigger the error recovery, the driver always comes up in the probed state. To handle the case properly, we need to return a failure code here and set the adapter state to the state that we entered the reset in indicating the state that we would like to come out of the recovery reset in. Signed-off-by: John Allen <jallen@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-16net: lan78xx: Fix race in tx pending skb size calculationStefan Wahren
The skb size calculation in lan78xx_tx_bh is in race with the start_xmit, which could lead to rare kernel oopses. So protect the whole skb walk with a spin lock. As a benefit we can unlink the skb directly. This patch was tested on Raspberry Pi 3B+ Link: https://github.com/raspberrypi/linux/issues/2608 Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet") Cc: stable <stable@vger.kernel.org> Signed-off-by: Floris Bos <bos@je-eigen-domein.nl> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-16drm/amdgpu: add amdgpu_job_submit_direct helperChristian König
Make sure that we properly initialize at least the sched member. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Acked-by: Chunming Zhou <david1.zhou@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-16drm/amdgpu: remove job->ringChristian König
We can easily get that from the scheduler. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Acked-by: Chunming Zhou <david1.zhou@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-16drm/amdgpu: remove ring parameter from amdgpu_job_submitChristian König
We know the ring through the entity anyway. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Acked-by: Chunming Zhou <david1.zhou@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-16drm/amdgpu: remove fence context from the jobChristian König
Can be obtained directly from the fence as well. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Acked-by: Chunming Zhou <david1.zhou@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-16drm/amdgpu: cleanup job headerChristian König
Move job related defines, structure and function declarations to amdgpu_job.h Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Acked-by: Chunming Zhou <david1.zhou@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-16drm/amd/display: Fix some checkpatch.pl errors and warnings in dc_link_dp.cHarry Wentland
[Why] Any Linux kernel code should pass checkpatch.pl with no errors and little, if any, warning. [How] Fixing some spacing errors and warnings. Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-16drm/amd/display: Null ptr check for set_sdr_white_levelKrunoslav Kovac
[Why&How] Cursor boosting can only be done on DCN+ Check for nullptr since DCE doesn't implement it. Signed-off-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Reviewed-by: Sivapiriyan Kumarasamy <Sivapiriyan.Kumarasamy@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-16drm/amd/display: dal 3.1.56Harry Wentland
Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Steven Chiu <Steven.Chiu@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-16drm/amd/display: add new dc debug structure to track debug dataJun Lei
[why] Some DTN tests still failing @ 2% Need to reduce. [how] add instrumentation code to driver so we can get more information from failed runs. Signed-off-by: Jun Lei <Jun.Lei@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-16drm/amd/display: Move address tracking out of HUBPTony Cheng
[Why] We sometime require remapping of FB address space to UMA [How] Move address tracking up a layer before we apply address translation Signed-off-by: Tony Cheng <tony.cheng@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-16drm/amd/display: Add hook for MST root branch infoNikola Cornij
This allows DM to do any necessary updates before MST discovery starts. Signed-off-by: Nikola Cornij <nikola.cornij@amd.com> Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-16drm/amd/display: add HDR visual confirmGloria Li
[Why] Testing team wants a way to tell if HDR is on or not [How] Program the overscan color to visually indicate the HDR state of the top-most plane Signed-off-by: Gloria Li <geling.li@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-16drm/amd/display: Refactor SDR cursor boosting in HDR modeKrunoslav Kovac
[Why] Cursor boosting is done via CNVC_CUR register which is DPP, not HUBP Previous commit was implementing it in HUBP functions, and also breaking diags tests. [How] 1. Undo original commit as well as Eric's diags test fix, almost completely 2. Move programming to DPP and call via new dc_stream function 3. Also removing cur_rom_en from dpp_cursor_attributes and programming as part of normal cursor attributes as it depends on cursor color format Signed-off-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-16drm/amd/display: Add headers for hardcoded 1d luts.Vitaly Prosyak
Hard-coded luts are needed since complex algorithms are used for color and tone mapping. Add the headers for future use. Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-16drm/scheduler: add NULL pointer check for run queue (v2)Junwei Zhang
To check rq pointer before adding entity into it. That avoids NULL pointer access in some case. v2: move the check to caller Suggested-by: Christian König <christian.koenig@amd.com> Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-16net/ipv6: Do not allow device only routes via the multipath APIDavid Ahern
Eric reported that reverting the patch that fixed and simplified IPv6 multipath routes means reverting back to invalid userspace notifications. eg., $ ip -6 route add 2001:db8:1::/64 nexthop dev eth0 nexthop dev eth1 only generates a single notification: 2001:db8:1::/64 dev eth0 metric 1024 pref medium While working on a fix for this problem I found another case that is just broken completely - a multipath route with a gateway followed by device followed by gateway: $ ip -6 ro add 2001:db8:103::/64 nexthop via 2001:db8:1::64 nexthop dev dummy2 nexthop via 2001:db8:3::64 In this case the device only route is dropped completely - no notification to userpsace but no addition to the FIB either: $ ip -6 ro ls 2001:db8:1::/64 dev dummy1 proto kernel metric 256 pref medium 2001:db8:2::/64 dev dummy2 proto kernel metric 256 pref medium 2001:db8:3::/64 dev dummy3 proto kernel metric 256 pref medium 2001:db8:103::/64 metric 1024 nexthop via 2001:db8:1::64 dev dummy1 weight 1 nexthop via 2001:db8:3::64 dev dummy3 weight 1 pref medium fe80::/64 dev dummy1 proto kernel metric 256 pref medium fe80::/64 dev dummy2 proto kernel metric 256 pref medium fe80::/64 dev dummy3 proto kernel metric 256 pref medium Really, IPv6 multipath is just FUBAR'ed beyond repair when it comes to device only routes, so do not allow it all. This change will break any scripts relying on the mpath api for insert, but I don't see any other way to handle the permutations. Besides, since the routes are added to the FIB as standalone (non-multipath) routes the kernel is not doing what the user requested, so it might as well tell the user that. Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David Ahern <dsahern@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-16tcp: Fix broken repair socket window probe patchStefan Baranoff
Correct previous bad attempt at allowing sockets to come out of TCP repair without sending window probes. To avoid changing size of the repair variable in struct tcp_sock, this lets the decision for sending probes or not to be made when coming out of repair by introducing two ways to turn it off. v2: * Remove erroneous comment; defines now make behavior clear Fixes: 70b7ff130224 ("tcp: allow user to create repair socket without window probes") Signed-off-by: Stefan Baranoff <sbaranoff@gmail.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Andrei Vagin <avagin@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-16net/mlx4_en: Don't reuse RX page when XDP is setSaeed Mahameed
When a new rx packet arrives, the rx path will decide whether to reuse the remainder of the page or not according to one of the below conditions: 1. frag_info->frag_stride == PAGE_SIZE / 2 2. frags->page_offset + frag_info->frag_size > PAGE_SIZE; The first condition is no met for when XDP is set. For XDP, page_offset is always set to priv->rx_headroom which is XDP_PACKET_HEADROOM and frag_info->frag_size is around mtu size + some padding, still the 2nd release condition will hold since XDP_PACKET_HEADROOM + 1536 < PAGE_SIZE, as a result the page will not be released and will be _wrongly_ reused for next free rx descriptor. In XDP there is an assumption to have a page per packet and reuse can break such assumption and might cause packet data corruptions. Fix this by adding an extra condition (!priv->rx_headroom) to the 2nd case to avoid page reuse when XDP is set, since rx_headroom is set to 0 for non XDP setup and set to XDP_PACKET_HEADROOM for XDP setup. No additional cache line is required for the new condition. Fixes: 34db548bfb95 ("mlx4: add page recycling in receive path") Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Suggested-by: Martin KaFai Lau <kafai@fb.com> CC: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-16net/ethernet/freescale/fman: fix cross-build errorRandy Dunlap
CC [M] drivers/net/ethernet/freescale/fman/fman.o In file included from ../drivers/net/ethernet/freescale/fman/fman.c:35: ../include/linux/fsl/guts.h: In function 'guts_set_dmacr': ../include/linux/fsl/guts.h:165:2: error: implicit declaration of function 'clrsetbits_be32' [-Werror=implicit-function-declaration] clrsetbits_be32(&guts->dmacr, 3 << shift, device << shift); ^~~~~~~~~~~~~~~ Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Madalin Bucur <madalin.bucur@nxp.com> Cc: netdev@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-16hv/netvsc: fix handling of fallback to single queue modeStephen Hemminger
The netvsc device may need to fallback to running in single queue mode if host side only wants to support single queue. Recent change for handling mtu broke this in setup logic. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: 3ffe64f1a641 ("hv_netvsc: split sub-channel setup into async and sync") Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-16ibmvnic: Revise RX/TX queue error messagesThomas Falcon
During a device failover, there may be latency between the loss of the current backing device and a notification from firmware that a failover has occurred. This latency can result in a large amount of error printouts as firmware returns outgoing traffic with a generic error code. These are not necessarily errors in this case as the firmware is busy swapping in a new backing adapter and is not ready to send packets yet. This patch reclassifies those error codes as warnings with an explanation that a failover may be pending. All other return codes will be considered errors. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-16ipv6: make DAD fail with enhanced DAD when nonce length differsSabrina Dubroca
Commit adc176c54722 ("ipv6 addrconf: Implemented enhanced DAD (RFC7527)") added enhanced DAD with a nonce length of 6 bytes. However, RFC7527 doesn't specify the length of the nonce, other than being 6 + 8*k bytes, with integer k >= 0 (RFC3971 5.3.2). The current implementation simply assumes that the nonce will always be 6 bytes, but others systems are free to choose different sizes. If another system sends a nonce of different length but with the same 6 bytes prefix, it shouldn't be considered as the same nonce. Thus, check that the length of the received nonce is the same as the length we sent. Ugly scapy test script running on veth0: def loop(): pkt=sniff(iface="veth0", filter="icmp6", count=1) pkt = pkt[0] b = bytearray(pkt[Raw].load) b[1] += 1 b += b'\xde\xad\xbe\xef\xde\xad\xbe\xef' pkt[Raw].load = bytes(b) pkt[IPv6].plen += 8 # fixup checksum after modifying the payload pkt[IPv6].payload.cksum -= 0x3b44 if pkt[IPv6].payload.cksum < 0: pkt[IPv6].payload.cksum += 0xffff sendp(pkt, iface="veth0") This should result in DAD failure for any address added to veth0's peer, but is currently ignored. Fixes: adc176c54722 ("ipv6 addrconf: Implemented enhanced DAD (RFC7527)") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-16net: ethernet: stmmac: fix documentation warningCorentin Labbe
This patch remove the following documentation warning drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c:103: warning: Excess function parameter 'priv' description in 'stmmac_axi_setup' It was introduced in commit afea03656add7 ("stmmac: rework DMA bus setting and introduce new platform AXI structure") Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-16net: stmmac: dwmac-sun8i: fix typo descrive => describeCorentin Labbe
This patch fix a typo in the word Describe Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-16net: ip6_gre: get ipv6hdr after skb_cow_head()Prashant Bhole
A KASAN:use-after-free bug was found related to ip6-erspan while running selftests/net/ip6_gre_headroom.sh It happens because of following sequence: - ipv6hdr pointer is obtained from skb - skb_cow_head() is called, skb->head memory is reallocated - old data is accessed using ipv6hdr pointer skb_cow_head() call was added in e41c7c68ea77 ("ip6erspan: make sure enough headroom at xmit."), but looking at the history there was a chance of similar bug because gre_handle_offloads() and pskb_trim() can also reallocate skb->head memory. Fixes tag points to commit which introduced possibility of this bug. This patch moves ipv6hdr pointer assignment after skb_cow_head() call. Fixes: 5a963eb61b7c ("ip6_gre: Add ERSPAN native tunnel support") Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp> Reviewed-by: Greg Rose <gvrose8192@gmail.com> Acked-by: William Tu <u9012063@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-16tun: Fix use-after-free on XDP_TXToshiaki Makita
On XDP_TX we need to free up the frame only when tun_xdp_tx() returns a negative value. A positive value indicates that the packet is successfully enqueued to the ptr_ring, so freeing the page causes use-after-free. Fixes: 735fc4054b3a ("xdp: change ndo_xdp_xmit API to support bulking") Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-16bonding: Fix a typo in bonding.txtMasanari Iida
This patch fixes a spelling typo in bonding.txt Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-16tls: Stricter error checking in zerocopy sendmsg pathDave Watson
In the zerocopy sendmsg() path, there are error checks to revert the zerocopy if we get any error code. syzkaller has discovered that tls_push_record can return -ECONNRESET, which is fatal, and happens after the point at which it is safe to revert the iter, as we've already passed the memory to do_tcp_sendpages. Previously this code could return -ENOMEM and we would want to revert the iter, but AFAIK this no longer returns ENOMEM after a447da7d004 ("tls: fix waitall behavior in tls_sw_recvmsg"), so we fail for all error codes. Reported-by: syzbot+c226690f7b3126c5ee04@syzkaller.appspotmail.com Reported-by: syzbot+709f2810a6a05f11d4d3@syzkaller.appspotmail.com Signed-off-by: Dave Watson <davejwatson@fb.com> Fixes: 3c4d7559159b ("tls: kernel TLS support") Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-16scripts/tags.sh: Add BPF_CALLConstantine Shulyupin
Signed-off-by: Constantine Shulyupin <const@MakeLinux.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-16drm/amdgpu: Allow to create BO lists in CS ioctl v3Andrey Grodzovsky
This change is to support MESA performace optimization. Modify CS IOCTL to allow its input as command buffer and an array of buffer handles to create a temporay bo list and then destroy it when IOCTL completes. This saves on calling for BO_LIST create and destry IOCTLs in MESA and by this improves performance. v2: Avoid inserting the temp list into idr struct. v3: Remove idr alloation from amdgpu_bo_list_create. Remove useless argument from amdgpu_cs_parser_fini Minor cosmetic stuff. v4: Revert amdgpu_bo_list_destroy back to static Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Chunming Zhou <david1.zhou@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-16Revert "drm/amd/powerplay: fix performance drop on Vega10"Eric Huang
This reverts commit b87079ec7b4d38efee015367315958ce5495ba93. SMU FW team ask to remove this version specific code. Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-16drm/i915/selftests: Exercise reset to break stuck GTT evictionChris Wilson
We must be able to reset the GPU while we are waiting on it to perform an eviction (unbinding an active vma). So attach a spinning request to a target vma and try and it evict it from a thread to see if that blocks indefinitely. v2: Add a wait for the thread to start just in case that takes more than 10ms... v3: complete() not completion_done() to signal the completion. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180716134009.13143-1-chris@chris-wilson.co.uk
generated by cgit (git 2.34.1) at 2025-09-20 03:14:03 +0000