summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-10-14watchdog: imx7ulp: Strictly follow the sequence for wdog operationsAnson Huang
According to reference manual, the i.MX7ULP WDOG's operations except refresh should follow below sequence: 1. disable global interrupts; 2. unlock the wdog and wait unlock bit set; 3. reconfigure the wdog and wait for reconfiguration bit set; 4. enabel global interrupts. Strictly follow the recommended sequence can make it more robust. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/1596150213-31638-1-git-send-email-Anson.Huang@nxp.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-10-14watchdog: it87_wdt: add IT8772 IDHanspeter Portner
IT8772 watchdog works as in IT872x Tested on SHAREVDI K6-F12 board. Signed-off-by: Hanspeter Portner <dev@open-music-kontrollers.ch> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200827105940.2835910-1-hanspeter.portner@livesystems.ch Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-10-14watchdog: pcwd_usb: Avoid GFP_ATOMIC where it is not neededChristophe JAILLET
There is no need to use GFP_ATOMIC here. It is a probe function, no spinlock is taken and GFP_KERNEL is used just before and just after this 'usb_alloc_coherent()' call. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200809071912.742836-1-christophe.jaillet@wanadoo.fr Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-10-14drivers: watchdog: rdc321x_wdt: Fix race condition bugsMadhuparna Bhowmik
In rdc321x_wdt_probe(), rdc321x_wdt_device.queue is initialized after misc_register(), hence if ioctl is called before its initialization which can call rdc321x_wdt_start() function, it will see an uninitialized value of rdc321x_wdt_device.queue, hence initialize it before misc_register(). Also, rdc321x_wdt_device.default_ticks is accessed in reset() function called from write callback, thus initialize it before misc_register(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20200807112902.28764-1-madhuparnabhowmik10@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-10-14perf tools: Pass build_id object to dso__build_id_equal()Jiri Olsa
Passing build_id object to dso__build_id_equal(), so we can properly check build id with different size than sha1. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Ian Rogers <irogers@google.com> Link: https://lore.kernel.org/r/20201013192441.1299447-7-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-10-14virtiofs: calculate number of scatter-gather elements accuratelyVivek Goyal
virtiofs currently maps various buffers in scatter gather list and it looks at number of pages (ap->pages) and assumes that same number of pages will be used both for input and output (sg_count_fuse_req()), and calculates total number of scatterlist elements accordingly. But looks like this assumption is not valid in all the cases. For example, Cai Qian reported that trinity, triggers warning with virtiofs sometimes. A closer look revealed that if one calls ioctl(fd, 0x5a004000, buf), it will trigger following warning. WARN_ON(out_sgs + in_sgs != total_sgs) In this case, total_sgs = 8, out_sgs=4, in_sgs=3. Number of pages is 2 (ap->pages), but out_sgs are using both the pages but in_sgs are using only one page. In this case, fuse_do_ioctl() sets different size values for input and output. args->in_args[args->in_numargs - 1].size == 6656 args->out_args[args->out_numargs - 1].size == 4096 So current method of calculating how many scatter-gather list elements will be used is not accurate. Make calculations more precise by parsing size and ap->descs. Reported-by: Qian Cai <cai@redhat.com> Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Link: https://lore.kernel.org/linux-fsdevel/5ea77e9f6cb8c2db43b09fbd4158ab2d8c066a0a.camel@redhat.com/ Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2020-10-14perf tools: Pass build_id object to dso__set_build_id()Jiri Olsa
Passing build_id object to dso__set_build_id(), so it's easier to initialize dos's build id object. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Ian Rogers <irogers@google.com> Link: https://lore.kernel.org/r/20201013192441.1299447-6-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-10-14perf tools: Pass build_id object to build_id__sprintf()Jiri Olsa
Passing build_id object to build_id__sprintf function, so it can operate with the proper size of build id. This will create proper md5 build id readable names, like following: a50e350e97c43b4708d09bcd85ebfff7 instead of: a50e350e97c43b4708d09bcd85ebfff700000000 Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Ian Rogers <irogers@google.com> Link: https://lore.kernel.org/r/20201013192441.1299447-5-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-10-14perf tools: Pass build id object to sysfs__read_build_id()Jiri Olsa
Passing build id object to sysfs__read_build_id function, so it can populate the size of the build_id object. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Ian Rogers <irogers@google.com> Link: https://lore.kernel.org/r/20201013192441.1299447-4-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-10-14perf tools: Pass build_id object to filename__read_build_id()Jiri Olsa
Pass a build_id object to filename__read_build_id function, so it can populate the size of the build_id object. Changing filename__read_build_id() code for both ELF/non-ELF code. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Ian Rogers <irogers@google.com> Link: https://lore.kernel.org/r/20201013192441.1299447-3-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-10-14perf tools: Use build_id object in dsoJiri Olsa
Replace build_id byte array with struct build_id object and all the code that references it. The objective is to carry size together with build id array, so it's better to keep both together. This is preparatory change for following patches, and there's no functional change. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Ian Rogers <irogers@google.com> Link: https://lore.kernel.org/r/20201013192441.1299447-2-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-10-14selftests/powerpc: Fix eeh-basic.sh exit codesOliver O'Halloran
The kselftests test running infrastructure expects tests to finish with an exit code of 4 if the test decided it should be skipped. Currently eeh-basic.sh exits with the number of devices that failed to recover, so if four devices didn't recover we'll report a skip instead of a fail. Fix this by checking if the return code is non-zero and report success and failure by returning 0 or 1 respectively. For the cases where should actually skip return 4. Fixes: 85d86c8aa52e ("selftests/powerpc: Add basic EEH selftest") Signed-off-by: Oliver O'Halloran <oohall@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20201014024711.1138386-1-oohall@gmail.com
2020-10-13f2fs: fix writecount false positive in releasing compress blocksDaeho Jeong
In current condition check, if it detects writecount, it return -EBUSY regardless of f_mode of the file. Fixed it. Signed-off-by: Daeho Jeong <daehojeong@google.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-10-13f2fs: introduce check_swap_activate_fast()Chao Yu
check_swap_activate() will lookup block mapping via bmap() one by one, so its performance is very bad, this patch introduces check_swap_activate_fast() to use f2fs_fiemap() to boost this process, since f2fs_fiemap() will lookup block mappings in batch, therefore, it can improve swapon()'s performance significantly. Note that this enhancement only works when page size is equal to f2fs' block size. Testcase: (backend device: zram) - touch file - pin & fallocate file to 8GB - mkswap file - swapon file Before: real 0m2.999s user 0m0.000s sys 0m2.980s After: real 0m0.081s user 0m0.000s sys 0m0.064s Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-10-13f2fs: don't issue flush in f2fs_flush_device_cache() for nobarrier caseChao Yu
This patch changes f2fs_flush_device_cache() to skip issuing flush for nobarrier case. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-10-13f2fs: handle errors of f2fs_get_meta_page_nofailJaegeuk Kim
First problem is we hit BUG_ON() in f2fs_get_sum_page given EIO on f2fs_get_meta_page_nofail(). Quick fix was not to give any error with infinite loop, but syzbot caught a case where it goes to that loop from fuzzed image. In turned out we abused f2fs_get_meta_page_nofail() like in the below call stack. - f2fs_fill_super - f2fs_build_segment_manager - build_sit_entries - get_current_sit_page INFO: task syz-executor178:6870 can't die for more than 143 seconds. task:syz-executor178 state:R stack:26960 pid: 6870 ppid: 6869 flags:0x00004006 Call Trace: Showing all locks held in the system: 1 lock held by khungtaskd/1179: #0: ffffffff8a554da0 (rcu_read_lock){....}-{1:2}, at: debug_show_all_locks+0x53/0x260 kernel/locking/lockdep.c:6242 1 lock held by systemd-journal/3920: 1 lock held by in:imklog/6769: #0: ffff88809eebc130 (&f->f_pos_lock){+.+.}-{3:3}, at: __fdget_pos+0xe9/0x100 fs/file.c:930 1 lock held by syz-executor178/6870: #0: ffff8880925120e0 (&type->s_umount_key#47/1){+.+.}-{3:3}, at: alloc_super+0x201/0xaf0 fs/super.c:229 Actually, we didn't have to use _nofail in this case, since we could return error to mount(2) already with the error handler. As a result, this patch tries to 1) remove _nofail callers as much as possible, 2) deal with error case in last remaining caller, f2fs_get_sum_page(). Reported-by: syzbot+ee250ac8137be41d7b13@syzkaller.appspotmail.com Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-10-14kbuild: deb-pkg: clean up package name variablesMasahiro Yamada
Hard-code the names of linux-headers and debug packages in the control file. The kernel package is different for ARCH=um. Change the code for better readability. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-10-14kbuild: deb-pkg: do not build linux-headers package if CONFIG_MODULES=nMasahiro Yamada
Since commit 269a535ca931 ("modpost: generate vmlinux.symvers and reuse it for the second modpost"), with CONFIG_MODULES disabled, "make deb-pkg" (or "make bindeb-pkg") fails with: find: ‘Module.symvers’: No such file or directory If CONFIG_MODULES is disabled, it doesn't really make sense to build the linux-headers package. Fixes: 269a535ca931 ("modpost: generate vmlinux.symvers and reuse it for the second modpost") Reported-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-10-13clk: ingenic: Respect CLK_SET_RATE_PARENT in .round_ratePaul Cercueil
Clocks that don't have a divider are in our case all marked with the CLK_SET_RATE_PARENT flag. In this case, the .round_rate implementation should modify the value pointed to by parent_rate, in order to propagate the rate change to the parent, as explained in the documentation of clk_set_rate(). Signed-off-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20200903015048.3091523-5-paul@crapouillou.net Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-10-13clk: ingenic: Don't tag custom clocks with CLK_SET_RATE_PARENTPaul Cercueil
The custom clocks have custom functions to round, get or set their rate. Therefore, we can't assume that they need the CLK_SET_RATE_PARENT flag. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20200903015048.3091523-4-paul@crapouillou.net Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-10-13clk: ingenic: Don't use CLK_SET_RATE_GATE for PLLPaul Cercueil
CLK_SET_RATE_GATE means that the clock must be gated when being reclocked. This is not the case for the PLLs in Ingenic SoCs. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20200903015048.3091523-3-paul@crapouillou.net Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-10-13clk: ingenic: Use readl_poll_timeout instead of custom loopPaul Cercueil
Use the readl_poll_timeout() function instead of rolling our own busy-wait loops. This makes the code simpler. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20200903015048.3091523-2-paul@crapouillou.net Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-10-13clk: ingenic: Use to_clk_info() macro for all clocksPaul Cercueil
The to_clk_info() previously had a BUG_ON() to check that it was only called for PLL clocks. Yet, all the other clocks were doing the exact same thing the macro does, in-line. Move the to_clk_info() macro to the top of the file, remove the hardcoded BUG_ON(), and use it everywhere it makes sense. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20200903015048.3091523-1-paul@crapouillou.net Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-10-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfJakub Kicinski
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Extend nf_queue selftest to cover re-queueing, non-gso mode and delayed queueing, from Florian Westphal. 2) Clear skb->tstamp in IPVS forwarding path, from Julian Anastasov. 3) Provide netlink extended error reporting for EEXIST case. 4) Missing VLAN offload tag and proto in log target. ==================== Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-13clk: bcm2835: add missing release if devm_clk_hw_register failsNavid Emamdoost
In the implementation of bcm2835_register_pll(), the allocated pll is leaked if devm_clk_hw_register() fails to register hw. Release pll if devm_clk_hw_register() fails. Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Link: https://lore.kernel.org/r/20200809231202.15811-1-navid.emamdoost@gmail.com Fixes: 41691b8862e2 ("clk: bcm2835: Add support for programming the audio domain clocks") Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-10-13clk: at91: clk-sam9x60-pll: remove unused variableClaudiu Beznea
Fix variable set but not used compilation warning. Fixes: 43b1bb4a9b3e ("clk: at91: clk-sam9x60-pll: re-factor to support plls with multiple outputs") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1598338751-20607-4-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-10-13clk: at91: clk-main: update key before writing AT91_CKGR_MORClaudiu Beznea
SAMA5D2 datasheet specifies on chapter 33.22.8 (PMC Clock Generator Main Oscillator Register) that writing any value other than 0x37 on KEY field aborts the write operation. Use the key when selecting main clock parent. Fixes: 27cb1c2083373 ("clk: at91: rework main clk implementation") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/1598338751-20607-3-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-10-13clk: at91: remove the checking of parent_nameClaudiu Beznea
There is no need to check parent_name variable while assigning it to init.parent_names. parent_name variable is already checked at the beginning of at91_clk_register_peripheral() function. Fixes: 6114067e437eb ("clk: at91: add PMC peripheral clocks") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/1598338751-20607-2-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-10-13Merge tag 'mlx5-updates-2020-10-12' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-updates-2020-10-12 Updates to mlx5 driver: - Cleanup fix of uininitialized pointer read - xfrm IPSec TX offload ==================== Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-13clk: clk-prima2: fix return value check in prima2_clk_init()Xu Wang
In case of error, the function clk_register() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Signed-off-by: Xu Wang <vulab@iscas.ac.cn> Link: https://lore.kernel.org/r/20200921034522.9077-1-vulab@iscas.ac.cn Acked-by: Barry Song <baohua@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-10-13clk: mmp2: Fix the display clock divider baseLubomir Rintel
The LCD clock dividers are apparently based on one. No datasheet, determined empirically, but seems to be confirmed by line 19 of lcd.fth in OLPC laptop's Open Firmware [1]: h# 00000700 value pmua-disp-clk-sel \ PLL1 / 7 -> 113.86 MHz [1] https://raw.githubusercontent.com/quozl/openfirmware/65a08a73b2cac/cpu/arm/olpc/lcd.fth Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Link: https://lore.kernel.org/r/20200925233914.227786-1-lkundrak@v3.sk Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-10-13clk: pxa: Constify static struct clk_opsRikard Falkeborn
Constify a couple of static struct clk_ops that are not modified. Their only usage is inside the macros and their address is passed to clk_register_composite() which takes pointers to const struct clk_ops. This allows the compiler to put them in read-only memory. Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Link: https://lore.kernel.org/r/20200922184715.1854-1-rikard.falkeborn@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-10-13clk: baikal-t1: Mark Ethernet PLL as criticalSerge Semin
We've discovered that disabling the so called Ethernet PLL causes reset of the devices consuming its outgoing clock. The resets happen automatically even if each underlying clock gate is turned off. Due to that we can't disable the Ethernet PLL until the kernel is prepared for the corresponding resets. So for now just mark the PLL clock provider as critical. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: linux-mips@vger.kernel.org Link: https://lore.kernel.org/r/20200920110335.18034-1-Sergey.Semin@baikalelectronics.ru Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-10-13clk: qoriq: modify MAX_PLL_DIV to 32Zhao Qiang
On LS2088A, Watchdog need clk divided by 32, so modify MAX_PLL_DIV to 32 Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com> Link: https://lore.kernel.org/r/20200916030311.17280-1-qiang.zhao@nxp.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-10-13Merge branch '40GbE-Intel-Wired-LAN-Driver-Updates-2020-10-12'Jakub Kicinski
Tony Nguyen says: ==================== 40GbE Intel Wired LAN Driver Updates 2020-10-12 This series contains updates to i40e and e1000 drivers. Jaroslaw adds support for changing FEC on i40e if the firmware supports it. Jesse fixes a kbuild-bot warning regarding ternary operator on e1000. v2: Return -EOPNOTSUPP instead of -EINVAL when FEC settings are not supported by firmware. Remove, unneeded, done label and return errors directly in i40e_set_fec_param() for patch 1. Dropped, previous patch 2, to send to net. ==================== Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-13clk: axi-clkgen: Set power bits for fractional modeLars-Peter Clausen
Using the fractional dividers requires some additional power bits to be set. The fractional power bits are not documented and the current heuristic for setting them seems be insufficient for some cases. Just always set all the fractional power bits when in fractional mode. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Link: https://lore.kernel.org/r/20201001085948.21412-2-alexandru.ardelean@analog.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-10-13clk: axi-clkgen: Add support for fractional dividersLars-Peter Clausen
The axi-clkgen has (optional) fractional dividers on the output clock divider and feedback clock divider path. Utilizing the fractional dividers allows for a better resolution of the output clock, being able to synthesize more frequencies. Rework the driver support to support the fractional register fields, both for setting a new rate as well as reading back the current rate from the hardware. For setting the rate if no perfect divider settings were found in non-fractional mode try again in fractional mode and see if better settings can be found. This appears to be the recommended mode of operation. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Link: https://lore.kernel.org/r/20201001085948.21412-1-alexandru.ardelean@analog.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-10-13e1000: remove unused and incorrect codeJesse Brandeburg
The e1000_clear_vfta function was triggering a warning in kbuild-bot testing. It's actually a bug but has no functional impact. drivers/net/ethernet/intel/e1000/e1000_hw.c:4415:58: warning: Same expression in both branches of ternary operator. [duplicateExpressionTernary] Fix this warning by removing the offending code and simplifying the routine to do exactly what it did before, no functional change. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-13i40e: Allow changing FEC settings on X722 if supported by FWJaroslaw Gawin
Starting with API version 1.10 firmware for X722 devices has ability to change FEC settings in PHY. Code added in this patch allows changing FEC settings if the capability flag indicates the device supports this feature. Signed-off-by: Jaroslaw Gawin <jaroslawx.gawin@intel.com> Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-13mm/migrate: remove obsolete comment about device publicRalph Campbell
Device public memory never had an in tree consumer and was removed in commit 25b2995a35b6 ("mm: remove MEMORY_DEVICE_PUBLIC support"). Delete the obsolete comment. Signed-off-by: Ralph Campbell <rcampbell@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Christoph Hellwig <hch@lst.de> Link: http://lkml.kernel.org/r/20200827190735.12752-2-rcampbell@nvidia.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-13mm/migrate: remove cpages-- in migrate_vma_finalize()Ralph Campbell
The variable struct migrate_vma->cpages is only used in migrate_vma_setup(). There is no need to decrement it in migrate_vma_finalize() since it is never checked. Signed-off-by: Ralph Campbell <rcampbell@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Christoph Hellwig <hch@lst.de> Link: http://lkml.kernel.org/r/20200827190735.12752-1-rcampbell@nvidia.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-13mm, oom_adj: don't loop through tasks in __set_oom_adj when not necessarySuren Baghdasaryan
Currently __set_oom_adj loops through all processes in the system to keep oom_score_adj and oom_score_adj_min in sync between processes sharing their mm. This is done for any task with more that one mm_users, which includes processes with multiple threads (sharing mm and signals). However for such processes the loop is unnecessary because their signal structure is shared as well. Android updates oom_score_adj whenever a tasks changes its role (background/foreground/...) or binds to/unbinds from a service, making it more/less important. Such operation can happen frequently. We noticed that updates to oom_score_adj became more expensive and after further investigation found out that the patch mentioned in "Fixes" introduced a regression. Using Pixel 4 with a typical Android workload, write time to oom_score_adj increased from ~3.57us to ~362us. Moreover this regression linearly depends on the number of multi-threaded processes running on the system. Mark the mm with a new MMF_MULTIPROCESS flag bit when task is created with (CLONE_VM && !CLONE_THREAD && !CLONE_VFORK). Change __set_oom_adj to use MMF_MULTIPROCESS instead of mm_users to decide whether oom_score_adj update should be synchronized between multiple processes. To prevent races between clone() and __set_oom_adj(), when oom_score_adj of the process being cloned might be modified from userspace, we use oom_adj_mutex. Its scope is changed to global. The combination of (CLONE_VM && !CLONE_THREAD) is rarely used except for the case of vfork(). To prevent performance regressions of vfork(), we skip taking oom_adj_mutex and setting MMF_MULTIPROCESS when CLONE_VFORK is specified. Clearing the MMF_MULTIPROCESS flag (when the last process sharing the mm exits) is left out of this patch to keep it simple and because it is believed that this threading model is rare. Should there ever be a need for optimizing that case as well, it can be done by hooking into the exit path, likely following the mm_update_next_owner pattern. With the combination of (CLONE_VM && !CLONE_THREAD && !CLONE_VFORK) being quite rare, the regression is gone after the change is applied. [surenb@google.com: v3] Link: https://lkml.kernel.org/r/20200902012558.2335613-1-surenb@google.com Fixes: 44a70adec910 ("mm, oom_adj: make sure processes sharing mm have same view of oom_score_adj") Reported-by: Tim Murray <timmurray@google.com> Suggested-by: Michal Hocko <mhocko@kernel.org> Signed-off-by: Suren Baghdasaryan <surenb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Eugene Syromiatnikov <esyr@redhat.com> Cc: Christian Kellner <christian@kellner.me> Cc: Adrian Reber <areber@redhat.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Alexey Gladkov <gladkov.alexey@gmail.com> Cc: Michel Lespinasse <walken@google.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Andrei Vagin <avagin@gmail.com> Cc: Bernd Edlinger <bernd.edlinger@hotmail.de> Cc: John Johansen <john.johansen@canonical.com> Cc: Yafang Shao <laoar.shao@gmail.com> Link: https://lkml.kernel.org/r/20200824153036.3201505-1-surenb@google.com Debugged-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-13memblock: use separate iterators for memory and reserved regionsMike Rapoport
for_each_memblock() is used to iterate over memblock.memory in a few places that use data from memblock_region rather than the memory ranges. Introduce separate for_each_mem_region() and for_each_reserved_mem_region() to improve encapsulation of memblock internals from its users. Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Baoquan He <bhe@redhat.com> Acked-by: Ingo Molnar <mingo@kernel.org> [x86] Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> [MIPS] Acked-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> [.clang-format] Cc: Andy Lutomirski <luto@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Daniel Axtens <dja@axtens.net> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Emil Renner Berthing <kernel@esmil.dk> Cc: Hari Bathini <hbathini@linux.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: https://lkml.kernel.org/r/20200818151634.14343-18-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-13memblock: implement for_each_reserved_mem_region() using __next_mem_region()Mike Rapoport
Iteration over memblock.reserved with for_each_reserved_mem_region() used __next_reserved_mem_region() that implemented a subset of __next_mem_region(). Use __for_each_mem_range() and, essentially, __next_mem_region() with appropriate parameters to reduce code duplication. While on it, rename for_each_reserved_mem_region() to for_each_reserved_mem_range() for consistency. Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> [.clang-format] Cc: Andy Lutomirski <luto@kernel.org> Cc: Baoquan He <bhe@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Daniel Axtens <dja@axtens.net> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Emil Renner Berthing <kernel@esmil.dk> Cc: Hari Bathini <hbathini@linux.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: https://lkml.kernel.org/r/20200818151634.14343-17-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-13memblock: remove unused memblock_mem_size()Mike Rapoport
The only user of memblock_mem_size() was x86 setup code, it is gone now and memblock_mem_size() funciton can be removed. Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Baoquan He <bhe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Daniel Axtens <dja@axtens.net> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Emil Renner Berthing <kernel@esmil.dk> Cc: Hari Bathini <hbathini@linux.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: https://lkml.kernel.org/r/20200818151634.14343-16-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-13x86/setup: simplify reserve_crashkernel()Mike Rapoport
* Replace magic numbers with defines * Replace memblock_find_in_range() + memblock_reserve() with memblock_phys_alloc_range() * Stop checking for low memory size in reserve_crashkernel_low(). The allocation from limited range will anyway fail if there is no enough memory, so there is no need for extra traversal of memblock.memory Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Baoquan He <bhe@redhat.com> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Daniel Axtens <dja@axtens.net> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Emil Renner Berthing <kernel@esmil.dk> Cc: Hari Bathini <hbathini@linux.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: https://lkml.kernel.org/r/20200818151634.14343-15-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-13x86/setup: simplify initrd relocation and reservationMike Rapoport
Currently, initrd image is reserved very early during setup and then it might be relocated and re-reserved after the initial physical memory mapping is created. The "late" reservation of memblock verifies that mapped memory size exceeds the size of initrd, then checks whether the relocation required and, if yes, relocates inirtd to a new memory allocated from memblock and frees the old location. The check for memory size is excessive as memblock allocation will anyway fail if there is not enough memory. Besides, there is no point to allocate memory from memblock using memblock_find_in_range() + memblock_reserve() when there exists memblock_phys_alloc_range() with required functionality. Remove the redundant check and simplify memblock allocation. Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Baoquan He <bhe@redhat.com> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Daniel Axtens <dja@axtens.net> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Emil Renner Berthing <kernel@esmil.dk> Cc: Hari Bathini <hbathini@linux.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: https://lkml.kernel.org/r/20200818151634.14343-14-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-13arch, drivers: replace for_each_membock() with for_each_mem_range()Mike Rapoport
There are several occurrences of the following pattern: for_each_memblock(memory, reg) { start = __pfn_to_phys(memblock_region_memory_base_pfn(reg); end = __pfn_to_phys(memblock_region_memory_end_pfn(reg)); /* do something with start and end */ } Using for_each_mem_range() iterator is more appropriate in such cases and allows simpler and cleaner code. [akpm@linux-foundation.org: fix arch/arm/mm/pmsa-v7.c build] [rppt@linux.ibm.com: mips: fix cavium-octeon build caused by memblock refactoring] Link: http://lkml.kernel.org/r/20200827124549.GD167163@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Baoquan He <bhe@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Daniel Axtens <dja@axtens.net> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Emil Renner Berthing <kernel@esmil.dk> Cc: Hari Bathini <hbathini@linux.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: https://lkml.kernel.org/r/20200818151634.14343-13-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-13arch, mm: replace for_each_memblock() with for_each_mem_pfn_range()Mike Rapoport
There are several occurrences of the following pattern: for_each_memblock(memory, reg) { start_pfn = memblock_region_memory_base_pfn(reg); end_pfn = memblock_region_memory_end_pfn(reg); /* do something with start_pfn and end_pfn */ } Rather than iterate over all memblock.memory regions and each time query for their start and end PFNs, use for_each_mem_pfn_range() iterator to get simpler and clearer code. Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Baoquan He <bhe@redhat.com> Acked-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> [.clang-format] Cc: Andy Lutomirski <luto@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Daniel Axtens <dja@axtens.net> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Emil Renner Berthing <kernel@esmil.dk> Cc: Hari Bathini <hbathini@linux.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: https://lkml.kernel.org/r/20200818151634.14343-12-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-13memblock: reduce number of parameters in for_each_mem_range()Mike Rapoport
Currently for_each_mem_range() and for_each_mem_range_rev() iterators are the most generic way to traverse memblock regions. As such, they have 8 parameters and they are hardly convenient to users. Most users choose to utilize one of their wrappers and the only user that actually needs most of the parameters is memblock itself. To avoid yet another naming for memblock iterators, rename the existing for_each_mem_range[_rev]() to __for_each_mem_range[_rev]() and add a new for_each_mem_range[_rev]() wrappers with only index, start and end parameters. The new wrapper nicely fits into init_unavailable_mem() and will be used in upcoming changes to simplify memblock traversals. Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> [MIPS] Cc: Andy Lutomirski <luto@kernel.org> Cc: Baoquan He <bhe@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Daniel Axtens <dja@axtens.net> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Emil Renner Berthing <kernel@esmil.dk> Cc: Hari Bathini <hbathini@linux.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: https://lkml.kernel.org/r/20200818151634.14343-11-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit (git 2.34.1) at 2025-09-14 22:13:42 +0000