summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-09-27cxgb4: Inform caller if driver didn't upgrade firmwareVipul Pandya
If a card had already been initialized, on reloading cxgb4 driver firmware required an upgrade but the upgrade did not happen. In that case a mailbox timeout would occur during T4 configuration file stuff. The fix is to let the caller know the firmware was not upgraded so a reset would be issued before starting the T4 config stuff. Signed-off-by: Jay Hernandez <jay@chelsio.com> Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-27cxgb4: Add support for T4 hardwired driver configuration settingsVipul Pandya
In case if user defined configuration file at /lib/firmware/cxgb4/t4-config.txt location and also factory default configuration file written to FLASH are not present then driver will use hardwired configuration settings. Signed-off-by: Jay Hernandez <jay@chelsio.com> Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-27cxgb4: Add support for T4 configuration fileVipul Pandya
Starting with T4 firmware version 1.3.11.0 the firmware now supports device configuration via a Firmware Configuration File. The Firmware Configuration File was primarily developed in order to centralize all of the configuration, resource allocation, etc. for Unified Wire operation where multiple Physical / Virtual Function Drivers would be using a T4 adapter simultaneously. The Firmware Configuration file can live in three locations as shown below in order of precedence. 1) User defined configuration file: /lib/firmware/cxgb4/t4-config.txt 2) Factory Default configuration file written to FLASH within the manufacturing process. 3) Hardwired driver configuration. Signed-off-by: Jay Hernandez <jay@chelsio.com> Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-27cxgb4/cxgb4vf: Code cleanup to enable T4 Configuration File supportVipul Pandya
This patch adds new enums and macros to enable T4 configuration file support. It also removes duplicate macro definitions. It fixes the build failure in cxgb4vf driver introduced because of old macro definition removal. It also performs SGE initialization based on T4 configuration file is provided or not. If it is provided then it uses the parameters provided in it otherwise it uses hard coded values. Signed-off-by: Jay Hernandez <jay@chelsio.com> Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-27cxgb4: Add functions to read memory via PCIE memory windowVipul Pandya
This patch implements two new functions t4_mem_win_read and t4_memory_read. These new functions can be used to read memory via the PCIE memory window. Please note, for proper execution of these functions PCIE_MEM_ACCESS_BASE_WIN registers must be setup correctly like how setup_memwin in the cxgb4 driver does it. Signed-off-by: Jay Hernandez <jay@chelsio.com> Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-27cxgb4: Fix incorrect values for MEMWIN*_APERTURE and MEMWIN*_BASEVipul Pandya
Signed-off-by: Jay Hernandez <jay@chelsio.com> Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-27sparc64: Fix comment type in NG4 copy from user.David S. Miller
Noticed by Greg Onufer. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-27[IA64] xen: Fix return value check in xencomm_vtop()Wei Yongjun
In case of error, the function follow_page() returns ERR_PTR() or NULL pointer. The NULL test in the error handling should be replaced with IS_ERR_OR_NULL(). dpatch engine is used to auto generated this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Tony Luck <tony.luck@intel.com>
2012-09-27um: Preinclude include/linux/kern_levels.hGeert Uytterhoeven
The userspace part of UML uses the asm-offsets.h generator mechanism to create definitions for UM_KERN_<LEVEL> that match the in-kernel KERN_<LEVEL> constant definitions. As of commit 04d2c8c83d0e3ac5f78aeede51babb3236200112 ("printk: convert the format for KERN_<LEVEL> to a 2 byte pattern"), KERN_<LEVEL> is no longer expanded to the literal '"<LEVEL>"', but to '"\001" "LEVEL"', i.e. it contains two parts. However, the combo of DEFINE_STR() in arch/x86/um/shared/sysdep/kernel-offsets.h and sed-y in Kbuild doesn't support string literals consisting of multiple parts. Hence for all UM_KERN_<LEVEL> definitions, only the SOH character is retained in the actual definition, while the remainder ends up in the comment. E.g. in include/generated/asm-offsets.h we get #define UM_KERN_INFO "\001" /* "6" KERN_INFO */ instead of #define UM_KERN_INFO "\001" "6" /* KERN_INFO */ This causes spurious '^A' output in some kernel messages: Calibrating delay loop... 4640.76 BogoMIPS (lpj=23203840) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 256 ^AChecking that host ptys support output SIGIO...Yes ^AChecking that host ptys support SIGIO on close...No, enabling workaround ^AUsing 2.6 host AIO NET: Registered protocol family 16 bio: create slab <bio-0> at 0 Switching to clocksource itimer To fix this: - Move the mapping from UM_KERN_<LEVEL> to KERN_<LEVEL> from arch/um/include/shared/common-offsets.h to arch/um/include/shared/user.h, which is preincluded for all userspace parts, - Preinclude include/linux/kern_levels.h for all userspace parts, to obtain the in-kernel KERN_<LEVEL> constant definitions. This doesn't violate the kernel/userspace separation, as include/linux/kern_levels.h is self-contained and doesn't expose any other kernel internals. - Remove the now unused STR() and DEFINE_STR() macros. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Richard Weinberger <richard@nod.at>
2012-09-27um: Fix IPC on umRichard Weinberger
commit c1d7e01d (ipc: use Kconfig options for __ARCH_WANT_[COMPAT_]IPC_PARSE_VERSION) forgot UML and broke IPC on it. Also UML has to select ARCH_WANT_IPC_PARSE_VERSION usin Kconfig. Reported-and-tested-by: <Toralf Förster toralf.foerster@gmx.de> Signed-off-by: Richard Weinberger <richard@nod.at>
2012-09-27netdev: pasemi: fix return value check in pasemi_mac_phy_init()Wei Yongjun
In case of error, the function of_phy_connect() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. dpatch engine is used to auto generate this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-27team: fix return value checkWei Yongjun
In case of error, the function genlmsg_put() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. dpatch engine is used to auto generate this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-27l2tp: fix return value checkWei Yongjun
In case of error, the function genlmsg_put() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. dpatch engine is used to auto generate this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-27Merge branch 'master' of git://1984.lsi.us.es/nfDavid S. Miller
Pablo Neira Ayuso says: ==================== If time allows, I'd appreciate if you can take the following fix for the xt_limit match. As Jan indicates, random things may occur while using the xt_limit match due to use of uninitialized memory. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-27x86/mce: Provide boot argument to honour bios-set CMCI thresholdNaveen N. Rao
The ACPI spec doesn't provide for a way for the bios to pass down recommended thresholds to the OS on a _per-bank_ basis. This patch adds a new boot option, which if passed, tells Linux to use CMCI thresholds set by the bios. As fail-safe, we initialize threshold to 1 if some banks have not been initialized by the bios and warn the user. Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2012-09-27staging: comedi: jr3_pci: fix iomem dereferenceIan Abbott
Correct a direct dereference of I/O memory to use an appropriate I/O memory access function. Note that the pointer being dereferenced is not currently tagged with `__iomem` but I plan to correct that for 3.7. Cc: stable <stable@vger.kernel.org> Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-27x86, smep, smap: Make the switching functions one-wayH. Peter Anvin
There is no fundamental reason why we should switch SMEP and SMAP on during early cpu initialization just to switch them off again. Now with %eflags and %cr4 forced to be initialized to a clean state, we only need the one-way enable. Also, make the functions inline to make them (somewhat) harder to abuse. This does mean that SMEP and SMAP do not get initialized anywhere near as early. Even using early_param() instead of __setup() doesn't give us control early enough to do this during the early cpu initialization phase. This seems reasonable to me, because SMEP and SMAP should not matter until we have userspace to protect ourselves from, but it does potentially make it possible for a bug involving a "leak of permissions to userspace" to get uncaught. Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-09-27perf trace: Add aliases for some syscallsArnaldo Carvalho de Melo
What we get from audit_syscall_to_name isn't what we find in the syscalls: tracepoint events, so add the alias that allows the tool to find prctl, fstat, fstatat and stat. Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-3m9su7jhwnxvepnr3ne1du5k@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-27USB: Fix race condition when removing host controllersAlan Stern
This patch (as1607) fixes a race that can occur if a USB host controller is removed while a process is reading the /sys/kernel/debug/usb/devices file. The usb_device_read() routine uses the bus->root_hub pointer to determine whether or not the root hub is registered. The is not a valid test, because the pointer is set before the root hub gets registered and remains set even after the root hub is unregistered and deallocated. As a result, usb_device_read() or usb_device_dump() can access freed memory, causing an oops. The patch changes the test to use the hcd->rh_registered flag, which does get set and cleared at the appropriate times. It also makes sure to hold the usb_bus_list_lock mutex while setting the flag, so that usb_device_read() will become aware of new root hubs as soon as they are registered. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Don Zickus <dzickus@redhat.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-27USB: ohci-at91: fix null pointer in ohci_hcd_at91_overcurrent_irqJoachim Eastwood
Fixes the following NULL pointer dereference: [ 7.740000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 7.810000] Unable to handle kernel NULL pointer dereference at virtual address 00000028 [ 7.810000] pgd = c3a38000 [ 7.810000] [00000028] *pgd=23a8c831, *pte=00000000, *ppte=00000000 [ 7.810000] Internal error: Oops: 17 [#1] PREEMPT ARM [ 7.810000] Modules linked in: ohci_hcd(+) regmap_i2c snd_pcm usbcore snd_page_alloc at91_cf snd_timer pcmcia_rsrc snd soundcore gpio_keys regmap_spi pcmcia_core usb_common nls_base [ 7.810000] CPU: 0 Not tainted (3.6.0-rc6-mpa+ #264) [ 7.810000] PC is at __gpio_to_irq+0x18/0x40 [ 7.810000] LR is at ohci_hcd_at91_overcurrent_irq+0x24/0xb4 [ohci_hcd] [ 7.810000] pc : [<c01392d4>] lr : [<bf08f694>] psr: 40000093 [ 7.810000] sp : c3a11c40 ip : c3a11c50 fp : c3a11c4c [ 7.810000] r10: 00000000 r9 : c02dcd6e r8 : fefff400 [ 7.810000] r7 : 00000000 r6 : c02cc928 r5 : 00000030 r4 : c02dd168 [ 7.810000] r3 : c02e7350 r2 : ffffffea r1 : c02cc928 r0 : 00000000 [ 7.810000] Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 7.810000] Control: c000717f Table: 23a38000 DAC: 00000015 [ 7.810000] Process modprobe (pid: 285, stack limit = 0xc3a10270) [ 7.810000] Stack: (0xc3a11c40 to 0xc3a12000) [ 7.810000] 1c40: c3a11c6c c3a11c50 bf08f694 c01392cc c3a11c84 c2c38b00 c3806900 00000030 [ 7.810000] 1c60: c3a11ca4 c3a11c70 c0051264 bf08f680 c3a11cac c3a11c80 c003e764 c3806900 [ 7.810000] 1c80: c2c38b00 c02cb05c c02cb000 fefff400 c3806930 c3a11cf4 c3a11cbc c3a11ca8 [ 7.810000] 1ca0: c005142c c005123c c3806900 c3805a00 c3a11cd4 c3a11cc0 c0053f24 c00513e4 [ 7.810000] 1cc0: c3a11cf4 00000030 c3a11cec c3a11cd8 c005120c c0053e88 00000000 00000000 [ 7.810000] 1ce0: c3a11d1c c3a11cf0 c00124d0 c00511e0 01400000 00000001 00000012 00000000 [ 7.810000] 1d00: ffffffff c3a11d94 00000030 00000000 c3a11d34 c3a11d20 c005120c c0012438 [ 7.810000] 1d20: c001dac4 00000012 c3a11d4c c3a11d38 c0009b08 c00511e0 c00523fc 60000013 [ 7.810000] 1d40: c3a11d5c c3a11d50 c0008510 c0009ab4 c3a11ddc c3a11d60 c0008eb4 c00084f0 [ 7.810000] 1d60: 00000000 00000030 00000000 00000080 60000013 bf08f670 c3806900 c2c38b00 [ 7.810000] 1d80: 00000030 c3806930 00000000 c3a11ddc c3a11d88 c3a11da8 c0054190 c00523fc [ 7.810000] 1da0: 60000013 ffffffff c3a11dec c3a11db8 00000000 c2c38b00 bf08f670 c3806900 [ 7.810000] 1dc0: 00000000 00000080 c02cc928 00000030 c3a11e0c c3a11de0 c0052764 c00520d8 [ 7.810000] 1de0: c3a11dfc 00000000 00000000 00000002 bf090f61 00000004 c02cc930 c02cc928 [ 7.810000] 1e00: c3a11e4c c3a11e10 bf090978 c005269c bf090f61 c02cc928 bf093000 c02dd170 [ 7.810000] 1e20: c3a11e3c c02cc930 c02cc930 bf0911d0 bf0911d0 bf093000 c3a10000 00000000 [ 7.810000] 1e40: c3a11e5c c3a11e50 c0155b7c bf090808 c3a11e7c c3a11e60 c0154690 c0155b6c [ 7.810000] 1e60: c02cc930 c02cc964 bf0911d0 c3a11ea0 c3a11e9c c3a11e80 c015484c c01545e8 [ 7.810000] 1e80: 00000000 00000000 c01547e4 bf0911d0 c3a11ec4 c3a11ea0 c0152e58 c01547f4 [ 7.810000] 1ea0: c381b88c c384ab10 c2c10540 bf0911d0 00000000 c02d7518 c3a11ed4 c3a11ec8 [ 7.810000] 1ec0: c01544c0 c0152e0c c3a11efc c3a11ed8 c01536cc c01544b0 bf091075 c3a11ee8 [ 7.810000] 1ee0: bf049af0 bf09120c bf0911d0 00000000 c3a11f1c c3a11f00 c0154e9c c0153628 [ 7.810000] 1f00: bf049af0 bf09120c 000ae190 00000000 c3a11f2c c3a11f20 c0155f58 c0154e04 [ 7.810000] 1f20: c3a11f44 c3a11f30 bf093054 c0155f1c 00000000 00006a4f c3a11f7c c3a11f48 [ 7.810000] 1f40: c0008638 bf093010 bf09120c 000ae190 00000000 c00093c4 00006a4f bf09120c [ 7.810000] 1f60: 000ae190 00000000 c00093c4 00000000 c3a11fa4 c3a11f80 c004fdc4 c000859c [ 7.810000] 1f80: c3a11fa4 000ae190 00006a4f 00016eb8 000ad018 00000080 00000000 c3a11fa8 [ 7.810000] 1fa0: c0009260 c004fd58 00006a4f 00016eb8 000ae190 00006a4f 000ae100 00000000 [ 7.810000] 1fc0: 00006a4f 00016eb8 000ad018 00000080 000adba0 000ad208 00000000 000ad3d8 [ 7.810000] 1fe0: beaf7ae8 beaf7ad8 000172b8 b6e4e940 20000010 000ae190 00000000 00000000 [ 7.810000] Backtrace: [ 7.810000] [<c01392bc>] (__gpio_to_irq+0x0/0x40) from [<bf08f694>] (ohci_hcd_at91_overcurrent_irq+0x24/0xb4 [ohci_hcd]) [ 7.810000] [<bf08f670>] (ohci_hcd_at91_overcurrent_irq+0x0/0xb4 [ohci_hcd]) from [<c0051264>] (handle_irq_event_percpu+0x38/0x1a8) [ 7.810000] r6:00000030 r5:c3806900 r4:c2c38b00 [ 7.810000] [<c005122c>] (handle_irq_event_percpu+0x0/0x1a8) from [<c005142c>] (handle_irq_event+0x58/0x7c) [ 7.810000] [<c00513d4>] (handle_irq_event+0x0/0x7c) from [<c0053f24>] (handle_simple_irq+0xac/0xd8) [ 7.810000] r5:c3805a00 r4:c3806900 [ 7.810000] [<c0053e78>] (handle_simple_irq+0x0/0xd8) from [<c005120c>] (generic_handle_irq+0x3c/0x48) [ 7.810000] r4:00000030 [ 7.810000] [<c00511d0>] (generic_handle_irq+0x0/0x48) from [<c00124d0>] (gpio_irq_handler+0xa8/0xfc) [ 7.810000] r4:00000000 [ 7.810000] [<c0012428>] (gpio_irq_handler+0x0/0xfc) from [<c005120c>] (generic_handle_irq+0x3c/0x48) [ 7.810000] [<c00511d0>] (generic_handle_irq+0x0/0x48) from [<c0009b08>] (handle_IRQ+0x64/0x88) [ 7.810000] r4:00000012 [ 7.810000] [<c0009aa4>] (handle_IRQ+0x0/0x88) from [<c0008510>] (at91_aic_handle_irq+0x30/0x38) [ 7.810000] r5:60000013 r4:c00523fc [ 7.810000] [<c00084e0>] (at91_aic_handle_irq+0x0/0x38) from [<c0008eb4>] (__irq_svc+0x34/0x60) [ 7.810000] Exception stack(0xc3a11d60 to 0xc3a11da8) [ 7.810000] 1d60: 00000000 00000030 00000000 00000080 60000013 bf08f670 c3806900 c2c38b00 [ 7.810000] 1d80: 00000030 c3806930 00000000 c3a11ddc c3a11d88 c3a11da8 c0054190 c00523fc [ 7.810000] 1da0: 60000013 ffffffff [ 7.810000] [<c00520c8>] (__setup_irq+0x0/0x458) from [<c0052764>] (request_threaded_irq+0xd8/0x134) [ 7.810000] [<c005268c>] (request_threaded_irq+0x0/0x134) from [<bf090978>] (ohci_hcd_at91_drv_probe+0x180/0x41c [ohci_hcd]) [ 7.810000] [<bf0907f8>] (ohci_hcd_at91_drv_probe+0x0/0x41c [ohci_hcd]) from [<c0155b7c>] (platform_drv_probe+0x20/0x24) [ 7.810000] [<c0155b5c>] (platform_drv_probe+0x0/0x24) from [<c0154690>] (driver_probe_device+0xb8/0x20c) [ 7.810000] [<c01545d8>] (driver_probe_device+0x0/0x20c) from [<c015484c>] (__driver_attach+0x68/0x88) [ 7.810000] r7:c3a11ea0 r6:bf0911d0 r5:c02cc964 r4:c02cc930 [ 7.810000] [<c01547e4>] (__driver_attach+0x0/0x88) from [<c0152e58>] (bus_for_each_dev+0x5c/0x9c) [ 7.810000] r6:bf0911d0 r5:c01547e4 r4:00000000 [ 7.810000] [<c0152dfc>] (bus_for_each_dev+0x0/0x9c) from [<c01544c0>] (driver_attach+0x20/0x28) [ 7.810000] r7:c02d7518 r6:00000000 r5:bf0911d0 r4:c2c10540 [ 7.810000] [<c01544a0>] (driver_attach+0x0/0x28) from [<c01536cc>] (bus_add_driver+0xb4/0x22c) [ 7.810000] [<c0153618>] (bus_add_driver+0x0/0x22c) from [<c0154e9c>] (driver_register+0xa8/0x144) [ 7.810000] r7:00000000 r6:bf0911d0 r5:bf09120c r4:bf049af0 [ 7.810000] [<c0154df4>] (driver_register+0x0/0x144) from [<c0155f58>] (platform_driver_register+0x4c/0x60) [ 7.810000] r7:00000000 r6:000ae190 r5:bf09120c r4:bf049af0 [ 7.810000] [<c0155f0c>] (platform_driver_register+0x0/0x60) from [<bf093054>] (ohci_hcd_mod_init+0x54/0x8c [ohci_hcd]) [ 7.810000] [<bf093000>] (ohci_hcd_mod_init+0x0/0x8c [ohci_hcd]) from [<c0008638>] (do_one_initcall+0xac/0x174) [ 7.810000] r4:00006a4f [ 7.810000] [<c000858c>] (do_one_initcall+0x0/0x174) from [<c004fdc4>] (sys_init_module+0x7c/0x1a0) [ 7.810000] [<c004fd48>] (sys_init_module+0x0/0x1a0) from [<c0009260>] (ret_fast_syscall+0x0/0x2c) [ 7.810000] r7:00000080 r6:000ad018 r5:00016eb8 r4:00006a4f [ 7.810000] Code: e24cb004 e59f3028 e1a02000 e7930180 (e5903028) [ 7.810000] ---[ end trace 85aa37ed128143b5 ]--- [ 7.810000] Kernel panic - not syncing: Fatal exception in interrupt Commit 6fffb77c (USB: ohci-at91: fix PIO handling in relation with number of ports) started setting unused pins to EINVAL. But this exposed a bug in the ohci_hcd_at91_overcurrent_irq function where the gpio was used without being checked to see if it is valid. This patches fixed the issue by adding the gpio valid check. Signed-off-by: Joachim Eastwood <joachim.eastwood@jotron.com> Cc: stable <stable@vger.kernel.org> # [3.4+] whereever 6fffb77c went Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-27um: kill thread->forkingAl Viro
we only use that to tell copy_thread() done by syscall from that done by kernel_thread(). However, it's easier to do simply by checking PF_KTHREAD in thread flags. Merge sys_clone() guts for 32bit and 64bit, while we are at it... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-09-27um: let signal_delivered() do SIGTRAP on singlestepping into handlerAl Viro
... rather than duplicating that in sigframe setup code (and doing that inconsistently, at that) Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-09-27um: don't leak floating point state and segment registers on execve()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-09-27um: take cleaning singlestep to start_thread()Al Viro
... assuming it's needed to be done at all Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-09-27can: c_can: fix segfault during rmmodAnilKumar Ch
This patch fixes an oops which occurs during unloading the driver. unregister_c_can_dev() is doing c_can/d_can module interrupts disable, which requires module clock enable. c_can/d_can interrupts enable/disable is handled properly in c_can_start and c_can_stop, so removing from unregister_c_can_dev(). The problem was triggered by adding runtime PM support to the c_can driver by this commit: 4cdd34b can: c_can: Add runtime PM support to Bosch C_CAN/D_CAN controller Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-09-27perf probe: Print an enum type variable in "enum variable-name" format when ↵Hyeoncheol Lee
showing accessible variables When showing accessible variables, an enum type variable was printed in "variable-name" format. Change this format into "enum variable-name". Signed-off-by: Hyeoncheol Lee <hyc.lee@gmail.com> Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/1348713399-4541-1-git-send-email-hyc.lee@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-27perf tools: Check libaudit availability for perf-trace builtinNamhyung Kim
The newly added trace command requires an external audit library. However it can cause a build error because it's not checked whether the libaudit is installed on system: CC builtin-trace.o builtin-trace.c:7:22: fatal error: libaudit.h: No such file or directory compilation terminated. make: *** [builtin-trace.o] Error 1 Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1348745018-21744-1-git-send-email-namhyung@kernel.org [ committer note: Added ", disables 'trace tool' to the feature warning msg ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-27pinctrl: Fix potential memory leak in pinctrl_register_one_pin()Sachin Kamat
'pindesc' was not freed when returning from an error induced exit path. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-09-27ARM: ux500: tidy up pin sleep modesLinus Walleij
This named the sleep mode pin configurations as *slpm* rather than *sleep* to correspond better with the settings from the datasheet. It also defines an optional sleep mode for the SPI controller SPI2. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-09-27arm64: ptrace: remove obsolete ptrace request numbers from user headersWill Deacon
The use of regsets has removed the need for many private ptrace requests, so remove the corresponding definitions from the user-visible ptrace.h Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2012-09-27doc: fix old config name of kprobetraceLiu Bo
KPROBE_TRACING has been replaced by KPROBE_EVENT. Signed-off-by: Liu Bo <liub.liubo@gmail.com> Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-09-27wlcore: protect wlcore_op_set_key with mutexEliad Peller
wlcore_op_set_key() calls wl18xx_set_key(), which in turn executes some of his function calls without acquiring wl->mutex and making sure the fw is awake. Adding mutex_lock()/ps_elp_wakeup() calls is not enough, as wl18xx_set_key() calls wl1271_tx_flush() which can't be called while the mutex is taken. Add the required calls to wlcore_op_set_key, but limit the queues_stop and flushing to the only encryption types in which a spare block might be needed (GEM and TKIP). [Arik - move state != ON check] Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <luca@coelho.fi>
2012-09-27wlcore: decrease elp timeoutEliad Peller
The current elp timeout (the same as the dynamic ps timeout - 1500ms) is too high. Usually, wl1271_ps_elp_sleep() get called right after tx/rx, which is fine, but some command might get sent even when there is no traffic (e.g. ht changes triggered by beacon frames), and leaving the device awake for 1500ms in this case is redundant. Use a timeout of 30ms. The fw won't enter elp anyway before the dynamic-ps timeout was expired as well (and it entered ps successfully). Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <luca@coelho.fi>
2012-09-27wlcore: Load the NVS file asynchronouslyIdo Yariv
The NVS file is loaded by the device's probe callback with the help of request_firmware(). Since request_firmware() relies on udevd, the modules cannot be loaded before hotplug events are handled. Fix this by loading the NVS file asynchronously and continue initialization only after the firmware request is over. Signed-off-by: Ido Yariv <ido@wizery.com> Signed-off-by: Luciano Coelho <luca@coelho.fi>
2012-09-27wlcore: Refactor probeIdo Yariv
Move most of the device-specific probe functionality into setup(), a new op. By doing this, wlcore_probe will be the first to request a firmware from userspace, making it easier to load the NVS file asynchronously. Signed-off-by: Ido Yariv <ido@wizery.com> Signed-off-by: Luciano Coelho <luca@coelho.fi>
2012-09-27wlcore: Allow memory access when the FW crashesIdo Yariv
When the no_recovery flag is used, the recovery work will not restart the FW and the state will not be set to 'on'. To enable post-mortem analysis, allow memory access in the 'restarting' state. Also, since the FW might not be operational, don't fail the read/write operations if elp_wakeup fails. Reported-by: Arkady Miasnikov <a-miasnikov@ti.com> Signed-off-by: Ido Yariv <ido@wizery.com> Signed-off-by: Luciano Coelho <luca@coelho.fi>
2012-09-27wlcore: use dynamic keep-alive template idsEliad Peller
Currently, all the (station) roles use the same keep-alive template id (0). However, the klv template ids shouldn't be shared by different roles. Implement a simple klv_templates bitmap, and let each role allocate its own klv template id on role initialization. [Arik - remove invalidation of KLV template when getting into "idle". This is already handled in unjoin] Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <luca@coelho.fi>
2012-09-27wlcore: invalidate keep-alive template on disconnectionEliad Peller
Previously, invalidation of the keep-alive template was done when going idle. However, while removing the idle-handling we didn't move the keep-alive template invalidation to another place. This finally resulted in fw error when trying to use the keep-alive template by another role. (Note that we still have an error here - each role should have its unique keep-alive template id, while currently they all use CMD_TEMPL_KLV_IDX_NULL_DATA (0). This only works now because we don't support concurrent connected stations yet) Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <luca@coelho.fi>
2012-09-27wl18xx: default to siso40 in 2.4ghz with a single antennaArik Nemtsov
The driver used siso20 in this case for legacy reasons. Reported-by: Ido Reis <idor@ti.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <luca@coelho.fi>
2012-09-27wlcore: Fix unbalanced interrupts enablementIdo Yariv
The interrupt line is enabled by wl12xx_enable_interrupts and wl18xx_enable_interrupts, but it will not be disabled in all failure paths. Fix this. Signed-off-by: Ido Yariv <ido@wizery.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <luca@coelho.fi>
2012-09-27wlcore: Don't recover during bootIdo Yariv
While recursive recovery is avoided during shutdown, a new recovery may be queued when the FW boots. The recovery work will then try to stop an already stopped hardware, which will most likely result in a kernel panic. Fix this by verifying that wl->state is on before queueing a new recovery. Signed-off-by: Ido Yariv <ido@wizery.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <luca@coelho.fi>
2012-09-27wlcore/wl18xx: add phy_fw_version_str to debugfs driver_stateYair Shapira
add phy_fw_version_str to debugfs driver_state file. information is taken during boot and stored in wl->chip.phy_fw_ver_str. Signed-off-by: Yair Shapira <yair.shapira@ti.com> Signed-off-by: Luciano Coelho <luca@coelho.fi>
2012-09-27wlcore: spi: use private max-buf-size limitArik Nemtsov
Limit SPI transmissions to the wl12xx max buffer size, as only 12xx was tested with SPI. This allows us to remove the global aggregation buffer constant. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <luca@coelho.fi>
2012-09-27wl18xx: number_of_assembled_ant5 indicates if A band is enabledYair Shapira
Use number_of_assembled_ant5 phy param to indicate if A band is enabled: if number_of_assembled_ant5 != 0 then it is enabled otherwise it is disabled. This aligns with phy implementation that uses this param both to indicate if band is active and the number of antennas. This parameter replaces enable_11a module param that was removed. User-Space applications can use wlconf and/or INI files to disable A band using this parameter. Signed-off-by: Yair Shapira <yair.shapira@ti.com> Signed-off-by: Igal Chernobelsky <igalc@ti.com> Signed-off-by: Luciano Coelho <luca@coelho.fi>
2012-09-27wlcore: allow up to 3 running STA interfaces in combinationsArik Nemtsov
This allows us to have a p2p-management interface (in STA mode), as we as a group dedicated interface. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <luca@coelho.fi>
2012-09-27wlcore: lazy-enable device rolesEliad Peller
Enable device roles just before starting it. This way, a single device role should be enough for all vifs, as we can't use concurrent device roles (which require ROC) anyway. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <luca@coelho.fi>
2012-09-27wlcore: always use wlvif->role_id for scansEliad Peller
enabled (but not-started) sta role should be good enough for scanning (both normal and scheduled), so use it instead of the device_role. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <luca@coelho.fi>
2012-09-27wlcore: make debug prints work without dynamic debugArik Nemtsov
Make debug prints operational when dynamic debug is not defined. This allows better debugging in production environments. Change the driver prefix to "wlcore" while were at it. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <luca@coelho.fi>
2012-09-27wlcore/wl18xx/wl12xx: allow up to 3 mac addressesArik Nemtsov
Allow 3 native mac addresses on 18xx. On 12xx allow 2 native mac addresses and set the LAA bit to create a third mac address. This enabled operation with a separate group interface. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <luca@coelho.fi>
2012-09-27wlcore: resume() only if sta is associatedEliad Peller
mac80211's resume() callback might get called even if the sta is not associated (but only up). The resume sequence in this case results in configuring the wake-up conditions of a non-started role, which causes fw assertion. Fix it by bailing out if the STA is not connected (like we do on suspend()). Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <luca@coelho.fi>
generated by cgit (git 2.34.1) at 2025-09-12 12:39:34 +0000