summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2025-01-12Merge tag 'mhi-for-v6.14' of ↵Greg Kroah-Hartman
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mani/mhi into char-misc-next Pull MHI update from Manivannan: MHI Host ======== - Free the "img_info::mhi_buf" in the error path of mhi_alloc_bhie_table() to avoid memory leak. - Add support for Qualcomm X100 5G RAN Accelerator card with relevant channel and event config. - Enable MSI-X if the endpoint supports. * tag 'mhi-for-v6.14' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mani/mhi: bus: mhi: host: pci_generic: Enable MSI-X if the endpoint supports bus: mhi: host: pci_generic: Add support for QDU100 device bus: mhi: host: Free mhi_buf vector inside mhi_alloc_bhie_table()
2025-01-12Merge tag 'iio-for-6.14a' of ↵Greg Kroah-Hartman
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next Pull IIO updaate from Jonathan: IIO: 1st set of new device support, features and cleanup for 6.14 Fairly quiet cycle. Usual mix of new drivers, device support in existing drivers, features and more general rework and cleanup. There are a few late breaking or long standing but complex fixes in here as well. There is one expected merge conflict due to an upstream fix touching neighboring code in ti-ads1119. The trivial resolution is the right one with the result ending up as: struct { s16 sample; aligned_s64 timestamp; } scan; New device support ================== adi,ad4000 - Add support for many Pulsar ADC devices: AD7685, AD7686, AD7687, AD7688, AD7690, AD7691, AD7693, AD7942, AD7946, AD7980, AD7982, AD7983, AD7984, AD7988-1 and AD7988-5 ADCs. Generally similar to the AD4000 series but with lower sampling rates and no configuration registers. Includes addition of timestamp channels. adi,adis16480 - Add support for ADIS16486, ADIS16487 and ADIS16489 IMUs. Required a few tweaks to existing driver and addition of tables. kionix,kx022a - Add support for KX134ACR-LBZ accelerometer that is similar to the KX132ACR-LBZ but with a wider (+-64G) sensor range. - Add support for KX134-1211 accelerometer that is similar to the KX132-1211 but with a wider (+-16G) sensor range. nxp,fxls8962af - Add support for fxls8974cf and fxls8967af accelerometers, Both are compatible with fxls8962af but with different device IDs which are used in presence checks. renesas,rzg2l - Add support for Renesas RZ/GS3 SoC ADCs (various driver refactors precede this to allow for chip differences). rohm,bd79704 - New driver for this 6 channel DAC. st,mpu6050 - Support he IAM20380 which is effectively a cut down IAM20608 IMU with only a gyroscope (no accelerometer). st,stm-timmer-trigger - Add support for ADC trigger use case for the STM32MP25 SOC. Do not support the counter functionality in this driver as that is handled by the counter subsystem. ti,opt4060 - New driver for this RGBW color sensor. Driver drop =========== rohm,bu20008 - Drop as decision was made to not mass produce this light sensor after Matti had done all the work to get a driver upstream. Features ======== adi,ad_sigma_delta library + ad7124 - Allow for GPIO to check interrupt status, enabling this device on more platforms that don't obey prior (non general) assumptions on how the interrupt chips work. - Allow variation in reset sequence length allowing chip specific optimizations rather than always using worst case. adi,ad7124 - Add temperature channel support. adi,ad7173 - Add support calibration modes for this family of ADCs. adi,adxl345 - Binding update to allow specification of which interrupt line is connected (or none). - Support interrupts and FIFO based data capture. bosch,bme680 - Add regulators support. Note this required a new binding doc rather than use of trivial-devices - Runtime PM support. microchip,pac1921 - Add ACPI support including _DSM for shunt value and label. renesas,rzg2l - Enable runtime autosuspend. - Add suspend and resume support. tyhx,hx9023s - Add loading of a firmware file used to set defaults for some configuration registers. vishay,veml6030 - Support triggered buffers allowing efficient data capture at higher speeds. - Add regmap cache to reduce access to device. Cleanup and minor fixes ======================= cross-tree - Another batch of conversions to devm_regulator_get_enable_read_voltage() helper and related conversions to full devm that this enables. - Various patches using guard() to allow early returns and simpler code flow. - Various conversions from s64 timestamp __aligned(8) to aligned_s64 type. Includes a few cleanups where this unsigned and it should have been signed. - Fix up some missing types for drive-open-drain in dt-binding docs. core - Add missing documentation for iio_dmaengine_buffer_setup_ext() - Add check that all buffers passed to iio_read_channel_ext_info() and iio_read_channel_label() are page sized and page aligned. Done this way because the callbacks are almost always only used to fill sysfs attributes. The check covers the tiny percentage of cases where use is made of this data in a consumer driver. - Mark scan_timestamp memory of struct iio_dev private ensuring no drivers change the value which belongs to the IIO core. documentation - Various missing ABI docs added. - ABI docs made to use Y consistently as the wildcard for channel number. - Combine duplicate in_currentY_raw entries in ABI docs. iio-mux - Fix alignment of buffers passed to iio_channel_read_ext_info(). adi,ad_sigma_delta library - Respect keep_cs_asserted flag in read path. - Close a race condition around irq enabling and disabling. - Use explicit unsigned int in place of unsigned. adi,ad6695 - Move dt-binding header under adc sub-directory and fix include path in dt example. adi,ad7124 - Check number of channels in DT doesn't exceed what the driver can handle. - Check input specified in DT are possible. - Improved error reporting during probe. adi,ad7173 - Drop unused structure element. adi,ad7293 - Ensure power is turned on before resetting. adi,adxl345 - Some documentation simplification and parameter renames. - Add a function than unifies handling of power up and power down. - Add defines to have a complete set of registers defined. - Add missing \n to end of error messages. amlogic,meson_saradc - Simplify handling of the REG11 register access. awinic,aw96104 - Constify iio_info structure. bosch,bmp085 - Add to dt-binding to indicate devices support SPI. bosch,bmp280 - Use sizeof() to replace a somewhat magic 2. - Rename sleep related variables so the unit is included and use fsleep() to replace usleep_range() calls. bosch,bno055 - Constify struct bin_attribute capella,cm3232 - Reset device before checking hardware ID inline with suggested flow from datasheet. diolan,dln2 - Simplify zeroing of structure used to gather up data by just clearing the whole thing before writing rather than trying to clear out he padding after write. freescale,vf610 - Use devm_ and dev_error_probe() to simplify code and allow dropping of explicit remove() callback. invensense,timestamp library - Use a cast to remove possibility of integer overflow. kionix,kx022a - Increase reset delay a little. maxim,max1363 - Use a buffer of sufficient size in iio_priv() rather than allocating variable sized buffer at use time. microchip,mcp4725 - Replace of_property_read_bool() with of_property_present() for detecting presence of regulator which is obviously not a bool. nxp,fxls8962af - Add wakeup-source property to the dt binding to allow these sensors to wake the system up from suspend. - Enable finer grained build when not all bus types need to be supported. renesas,rzg2l - Use dev_err_probe(), improving handling of probe errors and simplifying code. - Convert to devm_ based cleanup. - Remove unnecessary runtime PM complexity as clocks are managed through PM domains. - Switch pm_ptr() removing need for __maybe_unused markings. - use read_poll_timeout() to replace open coded equivalent. samsung, ssp_sensors - Simplify code by always providing timestamp whether or not it is enabled. st,lsm6dsx - Avoid need to include linux/i3c/master by using i3cdev_to_dev() to get to the contained struct device. st,stm32-timer-trigger - Check for clk_enable() fails. vishay,veml6030 - Use new gts-helper functions and fix the _scale attribute to take into account changes in gain and integration time. Various other typo fixes in variable names + documentation and help text. A few whitespace cleanup patches. * tag 'iio-for-6.14a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (142 commits) iio: iio-mux: kzalloc instead of devm_kzalloc to ensure page alignment iio: adc: ad7625: Add ending newlines to error messages iio: accel: adxl345: complete the list of defines iio: accel: adxl345: add FIFO with watermark events iio: accel: adxl345: initialize FIFO delay value for SPI iio: accel: adxl345: introduce interrupt handling iio: light: veml3235: fix scale to conform to ABI iio: gts-helper: add helpers to ease searches of gain_sel and new_gain iio: light: veml3235: extend regmap to add cache iio: light: veml3235: fix code style dt-bindings: iio: accel: adxl345: add interrupt-names dt-bindings: iio: accel: adxl345: make interrupts not a required property dt-bindings: iio: imu: bmi323: add boolean type for drive-open-drain dt-bindings: iio: imu: bmi270: add boolean type for drive-open-drain dt-bindings: iio: imu: bmi160: add boolean type for drive-open-drain iio: adc: meson: simplify MESON_SAR_ADC_REG11 register access iio: adc: meson: use tabs instead of spaces for some REG11 bit fields iio: adc: meson: fix voltage reference selection field name typo iio: adc: rockchip: correct alignment of timestamp iio: imu: inv_icm42600: switch timestamp type from int64_t __aligned(8) to aligned_s64 ...
2025-01-12Merge tag 'extcon-next-for-6.14' of ↵Greg Kroah-Hartman
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into char-misc-next Pull extcon updates from Chanwoo: Update extcon next for v6.14 Detailed description for this pull request: - Fix null pointer check of memory allocation on extcon-rtk-type-c.c. - Add EXTCON subsystem documentation including the detailed description/example. - Drop unneeded init of struct i2c_device_id:driver_data on extcon-fsa9480/pth5150.c. * tag 'extcon-next-for-6.14' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon: extcon: Drop explicit initialization of struct i2c_device_id::driver_data to 0 Documentation: extcon: add documentation for Extcon subsystem extcon: realtek: fix NULL deref check in extcon_rtk_type_c_probe
2025-01-12Merge tag 'coresight-next-v6.14' of ↵Greg Kroah-Hartman
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/coresight/linux into char-misc-next Pull coresight updates from Suzuki: coresight: Updates for Linux v6.14 Coresight self-hosted tracing subsystem updates for v6.14 includes: - Support for static traceid allocation for devices - Support for impdef, static trace filtering in Qualcomm replicators - Miscellaneous fixes Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> * tag 'coresight-next-v6.14' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/coresight/linux: coresight-tpda: Optimize the function of reading element size coresight: Add support for trace filtering by source coresight: Add a helper to check if a device is source dt-bindings: arm: qcom,coresight-static-replicator: Add property for source filtering coresight: Fix dsb_mode_store() unsigned val is never less than zero coresight: dummy: Add static trace id support for dummy source coresight: Add support to get static id for system trace sources dt-bindings: arm: Add arm,static-trace-id for coresight dummy source coresight: Drop atomics in connection refcounts Coresight: Narrow down the matching range of tpdm
2025-01-10misc: fastrpc: Fix copy buffer page sizeEkansh Gupta
For non-registered buffer, fastrpc driver copies the buffer and pass it to the remote subsystem. There is a problem with current implementation of page size calculation which is not considering the offset in the calculation. This might lead to passing of improper and out-of-bounds page size which could result in memory issue. Calculate page start and page end using the offset adjusted address instead of absolute address. Fixes: 02b45b47fbe8 ("misc: fastrpc: fix remote page size calculation") Cc: stable@kernel.org Signed-off-by: Ekansh Gupta <quic_ekangupt@quicinc.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20250110134239.123603-4-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-10misc: fastrpc: Fix registered buffer page addressEkansh Gupta
For registered buffers, fastrpc driver sends the buffer information to remote subsystem. There is a problem with current implementation where the page address is being sent with an offset leading to improper buffer address on DSP. This is leads to functional failures as DSP expects base address in page information and extracts offset information from remote arguments. Mask the offset and pass the base page address to DSP. This issue is observed is a corner case when some buffer which is registered with fastrpc framework is passed with some offset by user and then the DSP implementation tried to read the data. As DSP expects base address and takes care of offsetting with remote arguments, passing an offsetted address will result in some unexpected data read in DSP. All generic usecases usually pass the buffer as it is hence is problem is not usually observed. If someone tries to pass offsetted buffer and then tries to compare data at HLOS and DSP end, then the ambiguity will be observed. Fixes: 80f3afd72bd4 ("misc: fastrpc: consider address offset before sending to DSP") Cc: stable@kernel.org Signed-off-by: Ekansh Gupta <quic_ekangupt@quicinc.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20250110134239.123603-3-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-10misc: fastrpc: Deregister device nodes properly in error scenariosAnandu Krishnan E
During fastrpc_rpmsg_probe, if secure device node registration succeeds but non-secure device node registration fails, the secure device node deregister is not called during error cleanup. Add proper exit paths to ensure proper cleanup in case of error. Fixes: 3abe3ab3cdab ("misc: fastrpc: add secure domain support") Cc: stable@kernel.org Signed-off-by: Anandu Krishnan E <quic_anane@quicinc.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20250110134239.123603-2-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-10nvmem: core: improve range check for nvmem_cell_write()Jennifer Berringer
When __nvmem_cell_entry_write() is called for an nvmem cell that does not need bit shifting, it requires that the len parameter exactly matches the nvmem cell size. However, when the nvmem cell has a nonzero bit_offset, it was skipping this check. Accepting values of len larger than the cell size results in nvmem_cell_prepare_write_buffer() trying to write past the end of a heap buffer that it allocates. Add a check to avoid that problem and instead return -EINVAL when len doesn't match the number of bits expected by the nvmem cell when bit_offset is nonzero. This check uses cell->nbits in order to allow providing the smaller size to cells that are shifted into another byte by bit_offset. For example, a cell with nbits=8 and nonzero bit_offset would have bytes=2 but should accept a 1-byte write here, although no current callers depend on this. Fixes: 69aba7948cbe ("nvmem: Add a simple NVMEM framework for consumers") Cc: stable@vger.kernel.org Signed-off-by: Jennifer Berringer <jberring@redhat.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20241230141901.263976-7-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-10nvmem: qcom-spmi-sdam: Set size in struct nvmem_configLuca Weiss
Let the nvmem core know what size the SDAM is, most notably this fixes the size of /sys/bus/nvmem/devices/spmi_sdam*/nvmem being '0' and makes user space work with that file. ~ # hexdump -C -s 64 /sys/bus/nvmem/devices/spmi_sdam2/nvmem 00000040 02 01 00 00 04 00 00 00 00 00 00 00 00 00 00 00 |................| 00000050 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| * 00000080 Fixes: 40ce9798794f ("nvmem: add QTI SDAM driver") Cc: stable@vger.kernel.org Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20241230141901.263976-6-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-10nvmem: imx-ocotp-ele: set word length to 1Sascha Hauer
The ELE hardware internally has a word length of 4. However, among other things we store MAC addresses in the ELE OCOTP. With a length of 6 bytes these are naturally unaligned to the word length. Therefore we must support unaligned reads in reg_read() and indeed it works properly when reg_read() is called via nvmem_reg_read(). Setting the word size to 4 has the only visible effect that doing unaligned reads from userspace via bin_attr_nvmem_read() do not work because they are rejected by that function. Given that we have to abstract from word accesses to byte accesses in the driver, set the word size to 1. This allows bytewise accesses from userspace to be able to test what the driver has to support anyway. Fixes: 22e9e6fcfb50 ("nvmem: imx: support i.MX93 OCOTP") Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Cc: stable <stable@kernel.org> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20241230141901.263976-5-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-10nvmem: imx-ocotp-ele: fix MAC address byte orderSascha Hauer
According to the i.MX93 Fusemap the two MAC addresses are stored in words 315 to 317 like this: 315 MAC1_ADDR_31_0[31:0] 316 MAC1_ADDR_47_32[47:32] MAC2_ADDR_15_0[15:0] 317 MAC2_ADDR_47_16[31:0] This means the MAC addresses are stored in reverse byte order. We have to swap the bytes before passing them to the upper layers. The storage format is consistent to the one used on i.MX6 using imx-ocotp driver which does the same byte swapping as introduced here. With this patch the MAC address on my i.MX93 TQ board correctly reads as 00:d0:93:6b:27:b8 instead of b8:27:6b:93:d0:00. Fixes: 22e9e6fcfb50 ("nvmem: imx: support i.MX93 OCOTP") Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Cc: stable <stable@kernel.org> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20241230141901.263976-4-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-10nvmem: imx-ocotp-ele: fix reading from non zero offsetSascha Hauer
In imx_ocotp_reg_read() the offset comes in as bytes and not as words. This means we have to divide offset by 4 to get to the correct word offset. Also the incoming offset might not be word aligned. In order to read from the OCOTP the driver aligns down the previous word boundary and reads from there. This means we have to skip this alignment offset from the temporary buffer when copying the data to the output buffer. Fixes: 22e9e6fcfb50 ("nvmem: imx: support i.MX93 OCOTP") Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Cc: stable <stable@kernel.org> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20241230141901.263976-3-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-10nvmem: imx-ocotp-ele: simplify read beyond device checkSascha Hauer
Do the read beyond device check on function entry in bytes instead of 32bit words which is easier to follow. Fixes: 22e9e6fcfb50 ("nvmem: imx: support i.MX93 OCOTP") Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Cc: stable <stable@kernel.org> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20241230141901.263976-2-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-10pps: adjust references to actual name of uapi header fileLukas Bulwahn
Commit 86b525bed275 ("drivers pps: add PPS generators support") adds a file entry in MAINTAINERS and a reference in the ioctl-number documentation referring to the file pps-gen.h, whereas the file added in this commit is named pps_gen.h. Adjust the two references to the actual name of the uapi header file. While at it, put the entry in MAINTAINERS at the right place for alphabetical ordering. Fixes: 86b525bed275 ("drivers pps: add PPS generators support") Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com> Link: https://lore.kernel.org/r/20250110105000.56228-1-lukas.bulwahn@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-10VMCI: fix reference to ioctl-number.rstAlyssa Ross
There has never been an ioctl-number.h — this must have been a typo for ioctl-number.txt (which later become ioctl-number.rst). At the time this comment was written, the note didn't actually end up appearing anywhere, but I fixed the omission from ioctl-number.rst in 0a8e4dc1d353 ("Documentation: ioctl: document 0x07 ioctl code"). Fixes: 20259849bb1a ("VMCI: Some header and config files.") Signed-off-by: Alyssa Ross <hi@alyssa.is> Link: https://lore.kernel.org/r/re3xng4uwull2cu53xnu5dtv3wlstfiv3v7rmbwtw2qbvj5mo3@q45iujse5ovc Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-10virtio: console: Replace deprecated kmap_atomic with kmap_local_pageDavid Reaver
kmap_atomic() is deprecated and should be replaced with kmap_local_page() [1][2]. kmap_local_page() is faster in kernels with HIGHMEM enabled, can take page faults, and allows preemption. According to [2], this replacement is safe as long as the code between kmap_atomic() and kunmap_atomic() does not implicitly depend on disabling page faults or preemption. In this patch, the only thing happening between mapping and unmapping the page is a memcpy, and I don't suspect it depends on disabling page faults or preemption. [1] https://lwn.net/Articles/836144/ [2] https://docs.kernel.org/mm/highmem.html#temporary-virtual-mappings Signed-off-by: David Reaver <me@davidreaver.com> Reviewed-by: Amit Shah <amit@kernel.org> Link: https://lore.kernel.org/r/20250109035904.168345-1-me@davidreaver.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-10pps: clients: gpio: Bypass edge's direction check when not neededBastien Curutchet
In the IRQ handler, the GPIO's state is read to verify the direction of the edge that triggered the interruption before generating the PPS event. If a pulse is too short, the GPIO line can reach back its original state before this verification and the PPS event is lost. This check is needed when info->capture_clear is set because it needs interruptions on both rising and falling edges. When info->capture_clear is not set, interruption is triggered by one edge only so this check can be omitted. Add a warning if irq_handler is left without triggering any PPS event. Bypass the edge's direction verification when info->capture_clear is not set. Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com> Acked-by: Rodolfo Giometti <giometti@enneenne.com> Link: https://lore.kernel.org/r/20250108153012.514925-1-bastien.curutchet@bootlin.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-10cdx: disable cdx bus from bus shutdown callbackAbhijit Gangurde
disable cdx bus when bus shutdown is called. Signed-off-by: Abhijit Gangurde <abhijit.gangurde@amd.com> Link: https://lore.kernel.org/r/20241203084409.2747897-2-abhijit.gangurde@amd.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-10drivers/card_reader/rtsx_usb: Restore interrupt based detectionSean Rhodes
This commit reintroduces interrupt-based card detection previously used in the rts5139 driver. This functionality was removed in commit 00d8521dcd23 ("staging: remove rts5139 driver code"). Reintroducing this mechanism fixes presence detection for certain card readers, which with the current driver, will taken approximately 20 seconds to enter S3 as `mmc_rescan` has to be frozen. Fixes: 00d8521dcd23 ("staging: remove rts5139 driver code") Cc: stable@vger.kernel.org Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sean Rhodes <sean@starlabs.systems> Link: https://lore.kernel.org/r/20241119085815.11769-1-sean@starlabs.systems Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-10misc: fastrpc: Rename tgid and pid to client_idEkansh Gupta
The information passed as request tgid and pid is actually the client id of the process. This client id is used as an identifier by DSP to identify the DSP PD corresponding to the process. Currently process tgid is getting passed as the identifier which is getting replaced by a custom client id. Rename the data which uses this client id. Signed-off-by: Ekansh Gupta <quic_ekangupt@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20250110134308.123739-3-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-10misc: fastrpc: Add support for multiple PD from one processEkansh Gupta
Memory intensive applications(which requires more tha 4GB) that wants to offload tasks to DSP might have to split the tasks to multiple user PD to make the resources available. For every call to DSP, fastrpc driver passes the process tgid which works as an identifier for the DSP to enqueue the tasks to specific PD. With current design, if any process opens device node more than once and makes PD init request, same tgid will be passed to DSP which will be considered a bad request and this will result in failure as the same identifier cannot be used for multiple DSP PD. Assign and pass a client ID to DSP which would be assigned during device open and will be dependent on the index of session allocated for the PD. This will allow the same process to open the device more than once and spawn multiple dynamic PD for ease of processing. Signed-off-by: Ekansh Gupta <quic_ekangupt@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20250110134308.123739-2-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-10misc: keba: Fix kernfs warning on module unloadGerhard Engleder
Unloading the cp500 module leads to the following warning: kernfs: can not remove 'eeprom', no directory WARNING: CPU: 1 PID: 1610 at fs/kernfs/dir.c:1683 kernfs_remove_by_name_ns+0xb1/0xc0 The parent I2C device of the nvmem devices is freed before the nvmem devices. The reference to the nvmem devices is put by devm after cp500_remove(), but at this time the parent I2C device does not exist anymore as the I2C controller and its devices have already been freed in cp500_remove(). Thus, nvmem tries to remove an entry from an already deleted directory. Free nvmem devices before I2C controller auxiliary device. Signed-off-by: Gerhard Engleder <eg@keba.com> Link: https://lore.kernel.org/r/20241214215759.60811-1-gerhard@engleder-embedded.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-10misc: Kconfig: Make MCHP_LAN966X_PCI depend on OF_OVERLAYRicardo Ribalda
Drivers should depend on configurations that can be user-configurable instead of selecting them. Without this patch, OF cannot be disabled this way: make allyesconfig scripts/config -d OF make olddefconfig Which is a typical test in CI systems like media-ci. Now that we are at it, remove the dependency on OF, it will come automatically from OF_OVERLAY. Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Link: https://lore.kernel.org/r/20241129-lan966x-depend-v2-1-72bb9397f421@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-10uio: uio_dmem_genirq: check the return value of devm_kasprintf()Bartosz Golaszewski
devm_kasprintf() can fail so check its return value and bail-out on no memory. Fixes: 52e2dc2ce2d8 ("uio: Convert a few more users to using %pOFn instead of device_node.name") Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/r/20241202181703.28546-1-brgl@bgdev.pl Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-10uio: Fix return value of pollAngus Chen
The return type of __poll_t can't be negative, -EIO will be translate to __poll_t,and will return to caller. Fixes: beafc54c4e2f ("UIO: Add the User IO core code") Signed-off-by: Angus Chen <angus.chen@jaguarmicro.com> Link: https://lore.kernel.org/r/20241126124259.1367-1-angus.chen@jaguarmicro.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-09Merge tag 'fpga-for-6.14-rc1' of ↵Greg Kroah-Hartman
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/fpga/linux-fpga into char-misc-next Xu writes: FPGA Manager changes for 6.14-rc1 - Peter's change fixes SRIOV problems for Intel DFL device. All patches have been reviewed on the mailing list, and have been in the last linux-next releases (as part of our for-next branch). Signed-off-by: Xu Yilun <yilun.xu@intel.com> * tag 'fpga-for-6.14-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/fpga/linux-fpga: fpga: dfl: destroy/recreate feature platform device on port release/assign fpga: dfl: drop unneeded get_device() and put_device() of feature device fpga: dfl: remove unneeded function build_info_create_dev() fpga: dfl: allocate platform device after feature device data fpga: dfl: store platform device id in feature device data fpga: dfl: store platform device name in feature device data fpga: dfl: store MMIO resources in feature device data fpga: dfl: convert features from flexible array member to separate array fpga: dfl: factor out feature device data from platform device data fpga: dfl: factor out feature device registration fpga: dfl: refactor internal DFL APIs to take/return feature device data fpga: dfl: store FIU type in feature platform data fpga: dfl: factor out feature data creation from build_info_commit_dev() fpga: dfl: pass feature platform data instead of device as argument fpga: dfl: afu: define local pointer to feature device fpga: dfl: afu: use parent device to log errors on port enable/disable fpga: dfl: return platform data from dfl_fpga_inode_to_feature_dev_data() fpga: dfl: omit unneeded argument pdata from dfl_feature_instance_init()
2025-01-09Merge tag 'socfpga_firmware_update_for_v6.14' of ↵Greg Kroah-Hartman
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into char-misc-next Dinh writes: SoCFPGA Firmware update for v6.14 - Use kthread_run_on_cpu() * tag 'socfpga_firmware_update_for_v6.14' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: firmware: stratix10-svc: Use kthread_run_on_cpu()
2025-01-09Merge tag 'w1-drv-6.14' of ↵Greg Kroah-Hartman
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/krzk/linux-w1 into char-misc-next Krzysztof writes: 1-Wire bus drivers for v6.14 1. ds2482: Add support for handling the VCC regulator supply and three more minor improvements/cleanups. 2. Constify 'struct bin_attribute' in all drivers. 3. W1 core: use sysfs_emit() instead of sprintf(), as preferred coding style. * tag 'w1-drv-6.14' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/krzk/linux-w1: w1: core: use sysfs_emit() instead of sprintf() w1: ds28e04: Constify 'struct bin_attribute' w1: ds2805: Constify 'struct bin_attribute' w1: ds2781: Constify 'struct bin_attribute' w1: ds2780: Constify 'struct bin_attribute' w1: ds2438: Constify 'struct bin_attribute' w1: ds2433: Constify 'struct bin_attribute' w1: ds2431: Constify 'struct bin_attribute' w1: ds2430: Constify 'struct bin_attribute' w1: ds2413: Constify 'struct bin_attribute' w1: ds2408: Constify 'struct bin_attribute' w1: ds2406: Constify 'struct bin_attribute' w1: Constify 'struct bin_attribute' w1: ds2482: Fix datasheet URL w1: ds2482: Add regulator support w1: ds2482: switch to devm_kzalloc() from kzalloc() dt-bindings: w1: ds2482: Add vcc-supply property
2025-01-08bus: mhi: host: pci_generic: Enable MSI-X if the endpoint supportsVivek Pernamitta
Enable MSI-X if the endpoint supports. Signed-off-by: Vivek Pernamitta <quic_vpernami@quicinc.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20250108-msix-v2-1-dc4466922350@quicinc.com [mani: added pci_generic prefix to subject] Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2025-01-08misc: microchip: pci1xxxx: Add push-pull drive support for GPIORengarajan S
Add support to configure GPIO pins for push-pull drive mode. Signed-off-by: Rengarajan S <rengarajan.s@microchip.com> Link: https://lore.kernel.org/r/20241205134956.1493091-1-rengarajan.s@microchip.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-08scripts/spdxcheck: Handle license identifiers in Jinja commentsLukas Bulwahn
Commit 4b132aacb076 ("tools: Add xdrgen") adds a tool, which uses Jinja template files, i.e., files with the j2 file extension, for its lightweight code generation. These template files for this tool have proper headers with the SPDX License information, which are included as Jinja comments by enclosing the text with '{#' and '#}'. Sofar, the spdxcheck script does not support to properly parse this license information in Jinja comments and it reports back with 'Invalid token: #}'. Parse Jinja comments properly by stripping the known Jinja comment suffix. Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com> Link: https://lore.kernel.org/r/20250108125207.57486-1-lukas.bulwahn@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-08scripts/spdxcheck: Parse j2 comments correctlyThomas Gleixner
j2 files use '#}' as comment closure, which trips up the SPDX parser: tools/.../definition.j2: 1:36 Invalid token: #} Handle those comments correctly by removing the closure. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/878qt2xr46.ffs@tglx Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-08ntsync: No longer depend on BROKEN.Elizabeth Figura
f5b335dc025cfee90957efa90dc72fada0d5abb4 ("misc: ntsync: mark driver as "broken" to prevent from building") was committed to avoid the driver being used while only part of its functionality was released. Since the rest of the functionality has now been committed, revert this. Signed-off-by: Elizabeth Figura <zfigura@codeweavers.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20241213193511.457338-31-zfigura@codeweavers.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-08docs: ntsync: Add documentation for the ntsync uAPI.Elizabeth Figura
Add an overall explanation of the driver architecture, and complete and precise specification for its intended behaviour. Signed-off-by: Elizabeth Figura <zfigura@codeweavers.com> Link: https://lore.kernel.org/r/20241213193511.457338-30-zfigura@codeweavers.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-08maintainers: Add an entry for ntsync.Elizabeth Figura
Add myself as maintainer, supported by CodeWeavers. Signed-off-by: Elizabeth Figura <zfigura@codeweavers.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20241213193511.457338-29-zfigura@codeweavers.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-08selftests: ntsync: Add a stress test for contended waits.Elizabeth Figura
Test a more realistic usage pattern, and one with heavy contention, in order to actually exercise ntsync's internal synchronization. This test has several threads in a tight loop acquiring a mutex, modifying some shared data, and then releasing the mutex. At the end we check if the data is consistent. Signed-off-by: Elizabeth Figura <zfigura@codeweavers.com> Link: https://lore.kernel.org/r/20241213193511.457338-28-zfigura@codeweavers.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-08selftests: ntsync: Add some tests for wakeup signaling via alerts.Elizabeth Figura
Expand the alert tests to cover alerting a thread mid-wait, to test that the relevant scheduling logic works correctly. Signed-off-by: Elizabeth Figura <zfigura@codeweavers.com> Link: https://lore.kernel.org/r/20241213193511.457338-27-zfigura@codeweavers.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-08selftests: ntsync: Add tests for alertable waits.Elizabeth Figura
Test the "alert" functionality of NTSYNC_IOC_WAIT_ALL and NTSYNC_IOC_WAIT_ANY, when a wait is woken with an alert and when it is woken by an object. Signed-off-by: Elizabeth Figura <zfigura@codeweavers.com> Link: https://lore.kernel.org/r/20241213193511.457338-26-zfigura@codeweavers.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-08selftests: ntsync: Add some tests for wakeup signaling with events.Elizabeth Figura
Expand the contended wait tests, which previously only covered events and semaphores, to cover events as well. Signed-off-by: Elizabeth Figura <zfigura@codeweavers.com> Link: https://lore.kernel.org/r/20241213193511.457338-25-zfigura@codeweavers.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-08selftests: ntsync: Add some tests for auto-reset event state.Elizabeth Figura
Test event-specific ioctls NTSYNC_IOC_EVENT_SET, NTSYNC_IOC_EVENT_RESET, NTSYNC_IOC_EVENT_PULSE, NTSYNC_IOC_EVENT_READ for auto-reset events, and waiting on auto-reset events. Signed-off-by: Elizabeth Figura <zfigura@codeweavers.com> Link: https://lore.kernel.org/r/20241213193511.457338-24-zfigura@codeweavers.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-08selftests: ntsync: Add some tests for manual-reset event state.Elizabeth Figura
Test event-specific ioctls NTSYNC_IOC_EVENT_SET, NTSYNC_IOC_EVENT_RESET, NTSYNC_IOC_EVENT_PULSE, NTSYNC_IOC_EVENT_READ for manual-reset events, and waiting on manual-reset events. Signed-off-by: Elizabeth Figura <zfigura@codeweavers.com> Link: https://lore.kernel.org/r/20241213193511.457338-23-zfigura@codeweavers.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-08selftests: ntsync: Add some tests for wakeup signaling with ↵Elizabeth Figura
WINESYNC_IOC_WAIT_ALL. Test contended "wait-for-all" waits, to make sure that scheduling and wakeup logic works correctly, and that the wait only exits once objects are all simultaneously signaled. Signed-off-by: Elizabeth Figura <zfigura@codeweavers.com> Link: https://lore.kernel.org/r/20241213193511.457338-22-zfigura@codeweavers.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-08selftests: ntsync: Add some tests for wakeup signaling with ↵Elizabeth Figura
WINESYNC_IOC_WAIT_ANY. Test contended "wait-for-any" waits, to make sure that scheduling and wakeup logic works correctly. Signed-off-by: Elizabeth Figura <zfigura@codeweavers.com> Link: https://lore.kernel.org/r/20241213193511.457338-21-zfigura@codeweavers.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-08selftests: ntsync: Add some tests for NTSYNC_IOC_WAIT_ALL.Elizabeth Figura
Test basic synchronous functionality of NTSYNC_IOC_WAIT_ALL, and when objects are considered simultaneously signaled. Signed-off-by: Elizabeth Figura <zfigura@codeweavers.com> Link: https://lore.kernel.org/r/20241213193511.457338-20-zfigura@codeweavers.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-08selftests: ntsync: Add some tests for NTSYNC_IOC_WAIT_ANY.Elizabeth Figura
Test basic synchronous functionality of NTSYNC_IOC_WAIT_ANY, when objects are considered signaled or not signaled, and how they are affected by a successful wait. Signed-off-by: Elizabeth Figura <zfigura@codeweavers.com> Link: https://lore.kernel.org/r/20241213193511.457338-19-zfigura@codeweavers.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-08selftests: ntsync: Add some tests for mutex state.Elizabeth Figura
Test mutex-specific ioctls NTSYNC_IOC_MUTEX_UNLOCK and NTSYNC_IOC_MUTEX_READ, and waiting on mutexes. Signed-off-by: Elizabeth Figura <zfigura@codeweavers.com> Link: https://lore.kernel.org/r/20241213193511.457338-18-zfigura@codeweavers.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-08selftests: ntsync: Add some tests for semaphore state.Elizabeth Figura
Wine has tests for its synchronization primitives, but these are more accessible to kernel developers, and also allow us to test some edge cases that Wine does not care about. This patch adds tests for semaphore-specific ioctls NTSYNC_IOC_SEM_POST and NTSYNC_IOC_SEM_READ, and waiting on semaphores. Signed-off-by: Elizabeth Figura <zfigura@codeweavers.com> Link: https://lore.kernel.org/r/20241213193511.457338-17-zfigura@codeweavers.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-08ntsync: Introduce alertable waits.Elizabeth Figura
NT waits can optionally be made "alertable". This is a special channel for thread wakeup that is mildly similar to SIGIO. A thread has an internal single bit of "alerted" state, and if a thread is alerted while an alertable wait, the wait will return a special value, consume the "alerted" state, and will not consume any of its objects. Alerts are implemented using events; the user-space NT emulator is expected to create an internal ntsync event for each thread and pass that event to wait functions. Signed-off-by: Elizabeth Figura <zfigura@codeweavers.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20241213193511.457338-16-zfigura@codeweavers.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-08ntsync: Introduce NTSYNC_IOC_EVENT_READ.Elizabeth Figura
This corresponds to the NT syscall NtQueryEvent(). This returns the signaled state of the event and whether it is manual-reset. Signed-off-by: Elizabeth Figura <zfigura@codeweavers.com> Link: https://lore.kernel.org/r/20241213193511.457338-15-zfigura@codeweavers.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-08ntsync: Introduce NTSYNC_IOC_MUTEX_READ.Elizabeth Figura
This corresponds to the NT syscall NtQueryMutant(). This returns the recursion count, owner, and abandoned state of the mutex. Signed-off-by: Elizabeth Figura <zfigura@codeweavers.com> Link: https://lore.kernel.org/r/20241213193511.457338-14-zfigura@codeweavers.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-09-08 19:47:36 +0000