summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-09-28ARM: aspeed: Kconfig: Fix indentationJuerg Haefliger
The convention for indentation seems to be a single tab. Help text is further indented by an additional two whitespaces. Fix the lines that violate these rules. Signed-off-by: Juerg Haefliger <juergh@canonical.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Acked-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20220523060532.7864-1-juergh@canonical.com Link: https://lore.kernel.org/r/20220928025926.2592030-1-joel@jms.id.au' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-09-28ARM: Drop CMDLINE_* dependency on ATAGSGeert Uytterhoeven
On arm32, the configuration options to specify the kernel command line type depend on ATAGS. However, the actual CMDLINE cofiguration option does not depend on ATAGS, and the code that handles this is not specific to ATAGS (see drivers/of/fdt.c:early_init_dt_scan_chosen()). Hence users who desire to override the kernel command line on arm32 must enable support for ATAGS, even on a pure-DT system. Other architectures (arm64, loongarch, microblaze, nios2, powerpc, and riscv) do not impose such a restriction. Hence drop the dependency on ATAGS. Fixes: bd51e2f595580fb6 ("ARM: 7506/1: allow for ATAGS to be configured out when DT support is selected") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-09-28ARM: Drop CMDLINE_FORCE dependency on !ARCH_MULTIPLATFORMGeert Uytterhoeven
On older platforms that boot an image with an appended DTB, or where the boot loader has no support for updating chosen/bootargs, it is common to rely on CMDLINE_FORCE. While a fixed command line can make the kernel unbootable on other platforms, it is not guaranteed to cause that. E.g. all Renesas boards use the same chosen/bootargs in upstream DTS, which works fine if your DHCP server hands out proper nfsroot parameters. Fixes: 84fc863606239d8b ("ARM: make ARCH_MULTIPLATFORM user-visible") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-09-28ARM: s3c: remove orphan declarations from arch/arm/mach-s3c/devs.hGaosheng Cui
s3c64xx_device_spi1 and s3c64xx_device_spi2 were removed by commit f1ba938e4f98 ("spi: s3c64xx: Delete unused boardfile helpers"), so remove the declaration, too. Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20220914034615.1240860-3-cuigaosheng1@huawei.com Link: https://lore.kernel.org/r/20220926104354.118578-3-krzysztof.kozlowski@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-09-28ARM: dts: exynos: correct s5k6a3 reset polarity on Midas familyDmitry Torokhov
According to s5k6a3 driver code, the reset line for the chip appears to be active low. This also matches the typical polarity of reset lines in general. Let's fix it up as having correct polarity in DTS is important when the driver will be switched over to gpiod API. Fixes: b4fec64758ab ("ARM: dts: Add camera device nodes for Exynos4412 TRATS2 board") Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20220913164104.203957-1-dmitry.torokhov@gmail.com Link: https://lore.kernel.org/r/20220926104354.118578-2-krzysztof.kozlowski@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-09-28Merge tag 'aspeed-6.1-devicetree' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into arm/dt ASPEED device tree updates for 6.1 - New machines * AMD's DaytonaX AST2600 BMC, for the amd64 server * Ampre's Mt. Mitchell AST2600 BMC, for the AmpereOne arm64 server - Fixes and updates for bletchley, mtjade, yosemitev2 and the ast2600-evb * tag 'aspeed-6.1-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc: ARM: dts: aspeed: ast2600-evb-a1: Add compatible ARM: dts: aspeed: ast2600evb: Fix compatible string ARM: dts: aspeed: ast2600-evb: Enable Quad SPI RX tranfers ARM: dts: aspeed-g6: Enable more UART controllers ARM: dts: aspeed: yosemitev2: Disable the EEPROM driver ARM: dts: aspeed: Add AMD DaytonaX BMC dt-bindings: arm: aspeed: document AMD DaytonaX ARM: dts: aspeed: Yosemite V2: Enable OCP debug card ARM: dts: aspeed: mtjade: Remove gpio-keys entries ARM: dts: aspeed: Add device tree for Ampere's Mt. Mitchell BMC dt-bindings: arm: aspeed: document Ampere Mt.Mitchell BMC compatibles ARM: dts: aspeed: bletchley: Remove hdc1080 node ARM: dts: aspeed: bletchley: Add USB debug card IPMB node ARM: dts: aspeed: ast2600-evb: Update I2C devices Link: https://lore.kernel.org/r/CACPK8Xepnci+f+7Pi1jtXod8Jmt+OnJYfDRENjiP-xDBQwFCVg@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-09-28Merge tag 'v6.1-rockchip-dts64-2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt RK3399-Nanopi-R4S-enterprise as variant board, Gru-Scarlet SKU variants, DSI support for rk356x, display-gamma-control for rk3399, display output for quartz64-b and rk3566-roc-pc, hdmi supplies for rk3399-roc-pc, some pinctrl improvements for the px30-evb and a number of changes to bring rk3399 rock4 and rock-pi4 structure closer to names used in schematics. * tag 'v6.1-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: dts: rockchip: use pin constant for reset-gpios on px30-evb arm64: dts: rockchip: add pinctrl for mipi-pdn pin on px30-evb arm64: dts: rockchip: set max drive-strength for cif_clkout_m0 on px30-evb arm64: dts: rockchip: add avdd-0v9-supply and avdd-1v8-supply on rk3399 rock 4c and pi4 arm64: dts: rockchip: sort nodes/properties on rk3399-rock-4 arm64: dts: rockchip: fix regulator name on rk3399-rock-4 arm64: dts: rockchip: sort nodes/properties on rk3399-rock-4c-plus arm64: dts: rockchip: fix regulator structure on rk3399-rock-4c-plus arm64: dts: rockchip: connect vcca_1v8 to APIO5_VDD on rk3399-rock-4c-plus arm64: dts: rockchip: Add DSI and DSI-DPHY nodes to rk356x arm64: dts: rockchip: Enable HDMI and GPU on quartz64-b arm64: dts: rockchip: Add RK3399 NanoPi R4S Enterprise Edition dt-bindings: Add doc for FriendlyARM NanoPi R4S Enterprise Edition arm64: dts: rockchip: add i2s0 I2S/PDM/TDM 8ch controller to px30 arm64: dts: rockchip: Add HDMI supplies on rk3399-roc-pc arm64: dts: rockchip: Support gru-scarlet sku{2,4} variants dt-bindings: arm: rockchip: Add gru-scarlet sku{2,4} variants arm64: dts: rockchip: enable gamma control on RK3399 arm64: dts: rockchip: Enable video output on rk3566-roc-pc Link: https://lore.kernel.org/r/38114097.10thIPus4b@phil Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-09-28clk: imx: imx6sx: remove the SET_RATE_PARENT flag for QSPI clocksHan Xu
There is no dedicate parent clock for QSPI so SET_RATE_PARENT flag should not be used. For instance, the default parent clock for QSPI is pll2_bus, which is also the parent clock for quite a few modules, such as MMDC, once GPMI NAND set clock rate for EDO5 mode can cause system hang due to pll2_bus rate changed. Fixes: f1541e15e38e ("clk: imx6sx: Switch to clk_hw based API") Signed-off-by: Han Xu <han.xu@nxp.com> Link: https://lore.kernel.org/r/20220915150959.3646702-1-han.xu@nxp.com Tested-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-09-28m68k: Rework BI_VIRT_RNG_SEED as BI_RNG_SEEDJason A. Donenfeld
This is useful on !virt platforms for kexec, so change things from BI_VIRT_RNG_SEED to be BI_RNG_SEED, and simply remove BI_VIRT_RNG_SEED because it only ever lasted one release, and nothing is broken by not having it. At the same time, keep a comment noting that it's been removed, so that ID isn't reused. In addition, we previously documented 2-byte alignment, but 4-byte alignment is actually necessary, so update that comment. Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org> Fixes: a1ee38ab1a75 ("m68k: virt: Use RNG seed from bootinfo block") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Link: https://lore.kernel.org/r/20220927130835.1629806-2-Jason@zx2c4.com Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2022-09-28m68k: Process bootinfo records before saving themJason A. Donenfeld
The RNG seed boot record is memzeroed after processing, in order to preserve forward secrecy. By saving the bootinfo for procfs prior to that, forward secrecy is violated, since it becomes possible to recover past states. So, save the bootinfo block only after first processing them. Fixes: a1ee38ab1a75 ("m68k: virt: Use RNG seed from bootinfo block") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Link: https://lore.kernel.org/r/20220927130835.1629806-1-Jason@zx2c4.com Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2022-09-28i2c: microchip: pci1xxxx: Add driver for I2C host controller in ↵Tharun Kumar P
multifunction endpoint of pci1xxxx switch Microchip pci1xxxx is an unmanaged PCIe3.1a Switch for Consumer, Industrial and Automotive applications. This switch has multiple downstream ports. In one of the Switch's Downstream port, there is a multifunction endpoint for peripherals which includes an I2C host controller. The I2C function in the endpoint operates at 100KHz, 400KHz and 1 MHz and has buffer depth of 128 bytes. This patch provides the I2C controller driver for the I2C function of the switch. Signed-off-by: Tharun Kumar P <tharunkumar.pasumarthi@microchip.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-09-28docs: i2c: slave-interface: return errno when handle I2C_SLAVE_WRITE_REQUESTEDQuan Nguyen
In case backend is not ready, ie: fail to wakeup or initialization, on the returning of the I2C_SLAVE_WRITE_REQUESTED event, bus driver should aware the backend status and might auto sending NACK on the next incoming bytes for I2C master to retry. Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com> Links:https://lore.kernel.org/linux-arm-kernel/556fa9e1-c54b-8370-4de7-c2d3ec7d6906@os.amperecomputing.com/ [wsa: made some wording more precise] Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-09-28ACPI: x86: s2idle: Add another ID to s2idle_dmi_tableMario Limonciello
It's reported that "ASUSTeK COMPUTER INC. ROG Flow X16 GV601RW" has non-functional fans after resume when using the AMD codepath. This issue is fixed using the Microsoft codepath. Add the 3 variants of this system to the Microsoft codepath DMI table. * GV601RW * GV601RM * GV601RE Link: https://www.reddit.com/r/linuxhardware/comments/wh50nd/compatibility_report_asus_rog_flow_x16_gv601rm/ Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2148#note_1571241 Reported-by: Luke Jones <luke@ljones.dev> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-09-28ACPI: x86: s2idle: Fix a NULL pointer dereferenceMario Limonciello
Ryzen 7000 (Raphael) introduced AMDI0008 for _HID. This ID was added in commit ed470febf837 ("ACPI: PM: s2idle: Add support for upcoming AMD uPEP HID AMDI008"), but then removed in favor of aligning all new IDs to Rembrandt support in commit fd894f05cf30 ("ACPI: x86: s2idle: If a new AMD _HID is missing assume Rembrandt"). Unfortunately there was a mistake in commit 100a57379380 ("ACPI: x86: s2idle: Move _HID handling for AMD systems into structures") that can lead to a NULL pointer dereference accessing `dev_id->driver_data` in the sentinel of `amd_hid_ids`. Fix this dereference. Reported-by: Richard Gong <Richard.Gong@amd.com> Fixes: 100a57379380 ("ACPI: x86: s2idle: Move _HID handling for AMD systems into structures") Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-09-28Bluetooth: Call shutdown for HCI_USER_CHANNELAbhishek Pandit-Subedi
Some drivers depend on shutdown being called for proper operation. Unset HCI_USER_CHANNEL and call the full close routine since shutdown is complementary to setup. Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-09-28Bluetooth: Prevent double register of suspendAbhishek Pandit-Subedi
Suspend notifier should only be registered and unregistered once per hdev. Simplify this by only registering during driver registration and simply exiting early when HCI_USER_CHANNEL is set. Reported-by: syzbot <syzkaller@googlegroups.com> Fixes: 359ee4f834f5 (Bluetooth: Unregister suspend with userchannel) Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-09-28Merge tag 'irq_urgent_for_v6.0' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull more irqchip fixes from Borislav Petkov: "More irqchip fixes for 6.0 from Marc Zyngier. Stuff got left hanging due to the whole Plumbers and vacations commotion. - A couple of configuration fixes for the recently merged Loongarch drivers - A fix to avoid dynamic allocation of a cpumask which was causing issues with PREEMPT_RT and the GICv3 ITS - A tightening of an error check in the stm32 exti driver" * tag 'irq_urgent_for_v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/loongson-pch-lpc: Add dependence on LoongArch irqchip: Select downstream irqchip drivers for LoongArch CPU irqchip/gic-v3-its: Remove cpumask_var_t allocation irqchip/stm32-exti: Remove check on always false condition
2022-09-28ice: Add support for VLAN priority filters in switchdevMartyna Szapar-Mudlaw
Enable support for adding TC rules that filter on the VLAN priority in switchdev mode. VLAN priority are the first 3 bits of 16b switch field vector word which contain also vlan id value within its last 12 bits. When getting vlan priority value from tc match.key it has to be shifted first to proper bits positions (by VLAN_PRIO_SHIFT) and then can be added to the joint 'vlan' field in ice_vlan_hdr in lookup element. The mask of lookup changes accordingly. 0x0FFF - when only vlan id is added in filter 0xE000 - when only vlan priority is added in filter 0xEFFF - when both these values are specified Signed-off-by: Martyna Szapar-Mudlaw <martyna.szapar-mudlaw@linux.intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-09-28ice: support features on new E810T variantsArkadiusz Kubalewski
Add new sub-device ids required for proper initialization of features on E810T devices supported by ice driver. Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-09-28ice: Merge pin initialization of E810 and E810T adaptersArkadiusz Kubalewski
Remove separate function initializing pins for E810T-based adapters and initialize pins based on feature bits. Signed-off-by: Maciej Machnikowski <maciej.machnikowski@intel.com> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-09-28Merge tag 'mmc-v6.0-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fixes from Ulf Hansson: "A couple of MMC fixes. This time there is also a fix for the ARM SCMI firmware driver, which has been acked by Sudeep Holla, the maintainer. MMC core: - Terminate infinite loop in SD-UHS voltage switch MMC host: - hsq: Fix kernel crash in the recovery path - moxart: Fix bus width configurations - sdhci: Fix kernel panic for cqe irq ARM_SCMI: - Fixup clock management by reverting 'firmware: arm_scmi: Add clock management to the SCMI power domain'" * tag 'mmc-v6.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: hsq: Fix data stomping during mmc recovery Revert "firmware: arm_scmi: Add clock management to the SCMI power domain" mmc: core: Terminate infinite loop in SD-UHS voltage switch mmc: moxart: fix 4-bit bus width and remove 8-bit bus width mmc: sdhci: Fix host->cmd is null
2022-09-28[coredump] don't use __kernel_write() on kmap_local_page()Al Viro
passing kmap_local_page() result to __kernel_write() is unsafe - random ->write_iter() might (and 9p one does) get unhappy when passed ITER_KVEC with pointer that came from kmap_local_page(). Fix by providing a variant of __kernel_write() that takes an iov_iter from caller (__kernel_write() becomes a trivial wrapper) and adding dump_emit_page() that parallels dump_emit(), except that instead of __kernel_write() it uses __kernel_write_iter() with ITER_BVEC source. Fixes: 3159ed57792b "fs/coredump: use kmap_local_page()" Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2022-09-28Merge tag 'clk-microchip-fixes-6.0' of ↵Stephen Boyd
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into clk-fixes Pull Microchip clock fixes for Polarfire SoCs: - fix panic at boot in clock initialization when building with clang-15 - make RTC's AHB clock critical as rtc will stop if the AHB interface clock is disabled * tag 'clk-microchip-fixes-6.0' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: clk: microchip: mpfs: make the rtc's ahb clock critical clk: microchip: mpfs: fix clk_cfg array bounds violation
2022-09-28Merge tag 'linux-can-fixes-for-6.0-20220928' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2022-09-28 The patch is by me and targets the c_can driver. It disables an optimization in the TX path of C_CAN cores which causes problems. * tag 'linux-can-fixes-for-6.0-20220928' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: can: c_can: don't cache TX messages for C_CAN cores ==================== Link: https://lore.kernel.org/r/20220928090629.1124190-1-mkl@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-28Merge tag 'nvme-6.1-2022-09-28' of git://git.infradead.org/nvme into ↵Jens Axboe
for-6.1/block Pull NVMe updates from Christoph: "nvme updates for Linux 6.1 - handle effects after freeing the request (Keith Busch) - copy firmware_rev on each init (Keith Busch) - restrict management ioctls to admin (Keith Busch) - ensure subsystem reset is single threaded (Keith Busch) - report the actual number of tagset maps in nvme-pci (Keith Busch) - small fabrics authentication fixups (Christoph Hellwig) - add common code for tagset allocation and freeing (Christoph Hellwig) - stop using the request_queue in nvmet (Christoph Hellwig) - set min_align_mask before calculating max_hw_sectors (Rishabh Bhatnagar) - send a rediscover uevent when a persistent discovery controller reconnects (Sagi Grimberg) - misc nvmet-tcp fixes (Varun Prakash, zhenwei pi)" * tag 'nvme-6.1-2022-09-28' of git://git.infradead.org/nvme: (31 commits) nvmet: don't look at the request_queue in nvmet_bdev_set_limits nvmet: don't look at the request_queue in nvmet_bdev_zone_mgmt_emulate_all nvme: remove nvme_ctrl_init_connect_q nvme-loop: use the tagset alloc/free helpers nvme-loop: store the generic nvme_ctrl in set->driver_data nvme-loop: initialize sqsize later nvme-fc: use the tagset alloc/free helpers nvme-fc: store the generic nvme_ctrl in set->driver_data nvme-fc: keep ctrl->sqsize in sync with opts->queue_size nvme-rdma: use the tagset alloc/free helpers nvme-rdma: store the generic nvme_ctrl in set->driver_data nvme-tcp: use the tagset alloc/free helpers nvme-tcp: store the generic nvme_ctrl in set->driver_data nvme-tcp: remove the unused queue_size member in nvme_tcp_queue nvme: add common helpers to allocate and free tagsets nvme-auth: add a MAINTAINERS entry nvmet: add helpers to set the result field for connect commands nvme: improve the NVME_CONNECT_AUTHREQ* definitions nvmet-auth: don't try to cancel a non-initialized work_struct nvmet-tcp: remove nvmet_tcp_finish_cmd ...
2022-09-28Merge branch 'master' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next Florian Westphal says: ==================== netfilter fix for net-next This is a late bug fix for the *net-next* tree to make nftables "fib" expression play nice with VRF devices. This was broken since day 1 (v4.10) so I don't see a compelling reason to push this via net at the last minute. * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next: netfilter: nft_fib: Fix for rpath check with VRF devices ==================== Link: https://lore.kernel.org/r/20220928113908.4525-1-fw@strlen.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-28x86/cacheinfo: Add a cpu_llc_shared_mask() UP variantBorislav Petkov
On a CONFIG_SMP=n kernel, the LLC shared mask is 0, which prevents __cache_amd_cpumap_setup() from doing the L3 masks setup, and more specifically from setting up the shared_cpu_map and shared_cpu_list files in sysfs, leading to lscpu from util-linux getting confused and segfaulting. Add a cpu_llc_shared_mask() UP variant which returns a mask with a single bit set, i.e., for CPU0. Fixes: 2b83809a5e6d ("x86/cpu/amd: Derive L3 shared_cpu_map from cpu_llc_shared_mask") Reported-by: Saurabh Sengar <ssengar@linux.microsoft.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/1660148115-302-1-git-send-email-ssengar@linux.microsoft.com
2022-09-28Revert "net: set proper memcg for net_init hooks allocations"Shakeel Butt
This reverts commit 1d0403d20f6c281cb3d14c5f1db5317caeec48e9. Anatoly Pugachev reported that the commit 1d0403d20f6c ("net: set proper memcg for net_init hooks allocations") is somehow causing the sparc64 VMs failed to boot and the VMs boot fine with that patch reverted. So, revert the patch for now and later we can debug the issue. Link: https://lore.kernel.org/all/20220918092849.GA10314@u164.east.ru/ Reported-by: Anatoly Pugachev <matorola@gmail.com> Signed-off-by: Shakeel Butt <shakeelb@google.com> Cc: Vasily Averin <vvs@openvz.org> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Michal Koutný <mkoutny@suse.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: cgroups@vger.kernel.org Cc: sparclinux@vger.kernel.org Cc: linux-mm@kvack.org Cc: linux-kernel@vger.kernel.org Tested-by: Anatoly Pugachev <matorola@gmail.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Fixes: 1d0403d20f6c ("net: set proper memcg for net_init hooks allocations") Reviewed-by: Muchun Song <songmuchun@bytedance.com> Acked-by: Roman Gushchin <roman.gushchin@linux.dev> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-09-28MAINTAINERS: Drop records pointing to 01.org/linux-acpiRafael J. Wysocki
The https://01.org/linux-acpi web site has become permanently inaccessible, so drop the records pointing to it from MAINTAINERS. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-09-28ACPI: Kconfig: Drop link to https://01.org/linux-acpiRafael J. Wysocki
Because the https://01.org/linux-acpi web site has become permanently inaccessible, drop the remaining link to it from the ACPI Kconfig. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-09-28ACPI: docs: Drop useless DSDT override documentationRafael J. Wysocki
Because https://01.org/linux-acpi web site has become permanently inaccessible, the "Overriding DSDT" document in the kernel tree pointing to it as the main source of information is useless (and the config option name mentioned by it is incorrect), so drop it and drop the pointer to it from the ACPI Kconfig. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-09-28ACPI: DPTF: Drop stale link from Kconfig helpRafael J. Wysocki
The web site pointed to from the DPTF Kconfig help is not accessible any more, so drop the link to it from there. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-09-28Merge tag 'devfreq-next-for-6.1' of ↵Rafael J. Wysocki
git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux Pull devfreq next for v6.1 from Chanwoo Choi: "1. Handle -EPROBE_DEFER when regulator is not probed on mtk-ci-devfreq.c 2. Use dev_err_probe to reduce the error log on rockchip-dfi.c" * tag 'devfreq-next-for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux: PM / devfreq: rockchip-dfi: Fix an error message PM / devfreq: mtk-cci: Handle sram regulator probe deferral
2022-09-28Merge tag 'cpufreq-arm-updates-6.1' of ↵Rafael J. Wysocki
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm Pull cpufreq/arm updates for 6.1-rc1 from Viresh Kumar: "- Add SM6115 to cpufreq-dt blocklist (Adam Skladowski). - Add support for Tegra239 and minor cleanups (Sumit Gupta, ye xingchen, and Yang Yingliang). - Add freq qos for qcom cpufreq driver and minor cleanups (Xuewen Yan, and Viresh Kumar). - Minor cleanups around functions called at module_init() (Xiu Jianfeng). - Use module_init and add module_exit for bmips driver (Zhang Jianhua)." * tag 'cpufreq-arm-updates-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: cpufreq: qcom-cpufreq-hw: Add cpufreq qos for LMh cpufreq: Add __init annotation to module init funcs cpufreq: tegra194: change tegra239_cpufreq_soc to static cpufreq: tegra194: Add support for Tegra239 cpufreq: qcom-cpufreq-hw: Fix uninitialized throttled_freq warning cpufreq: tegra194: Remove the unneeded result variable cpufreq: bmips-cpufreq: Use module_init and add module_exit cpufreq: Add SM6115 to cpufreq-dt-platdev blocklist
2022-09-28s390/dasd: use blk_mq_alloc_diskChristoph Hellwig
As far as I can tell there is no need for the staged setup in dasd, so allocate the tagset and the disk with the queue in dasd_gendisk_alloc. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Stefan Haberland <sth@linux.ibm.com> Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Link: https://lore.kernel.org/r/20220928143945.1687114-2-sth@linux.ibm.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-09-28perf arm-spe: augment the data source type with neoverse_spe listJing Zhang
When synthesizing event with SPE data source, commit 4e6430cbb1a9("perf arm-spe: Use SPE data source for neoverse cores") augment the type with source information by MIDR. However, is_midr_in_range only compares the first entry in neoverse_spe. Change is_midr_in_range to is_midr_in_range_list to traverse the neoverse_spe array so that all neoverse cores synthesize event with data source packet. Fixes: 4e6430cbb1a9f1dc ("perf arm-spe: Use SPE data source for neoverse cores") Reviewed-by: Ali Saidi <alisaidi@amazon.com> Reviewed-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Jing Zhang <renyu.zj@linux.alibaba.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ali Saidi <alisaidi@amazon.com> Cc: German Gomez <german.gomez@arm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.garry@huawei.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Shuai Xue <xueshuai@linux.alibaba.com> Cc: Timothy Hayes <timothy.hayes@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Zhuo Song <zhuo.song@linux.alibaba.com> Link: https://lore.kernel.org/r/1664197396-42672-1-git-send-email-renyu.zj@linux.alibaba.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-09-28drm/bridge: lt8912b: fix corrupted image outputFrancesco Dolcini
Correct I2C address for the register list in lt8912_write_lvds_config(), these registers are on the first I2C address (0x48), the current function is just writing garbage to the wrong registers and this creates multiple issues (artifacts and output completely corrupted) on some HDMI displays. Correct I2C address comes from Lontium documentation and it is the one used on other out-of-tree LT8912B drivers [1]. [1] https://github.com/boundarydevices/linux/blob/boundary-imx_5.10.x_2.0.0/drivers/video/lt8912.c#L296 Fixes: 30e2ae943c26 ("drm/bridge: Introduce LT8912B DSI to HDMI bridge") Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Acked-by: Adrien Grassein <adrien.grassein@gmail.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220922124306.34729-4-dev@pschenker.ch Link: https://patchwork.freedesktop.org/patch/msgid/20220922124306.34729-5-dev@pschenker.ch
2022-09-28drm/bridge: lt8912b: set hdmi or dvi modePhilippe Schenker
The Lontium LT8912 does have a setting for DVI or HDMI. This patch reads from EDID what the display needs and sets it accordingly. Fixes: 30e2ae943c26 ("drm/bridge: Introduce LT8912B DSI to HDMI bridge") Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Acked-by: Adrien Grassein <adrien.grassein@gmail.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220922124306.34729-3-dev@pschenker.ch
2022-09-28drm/bridge: lt8912b: add vsync hsyncPhilippe Schenker
Currently the bridge driver does not take care whether or not the display needs positive/negative vertical/horizontal syncs. Pass these two flags to the bridge from the EDID that was read out from the display. Fixes: 30e2ae943c26 ("drm/bridge: Introduce LT8912B DSI to HDMI bridge") Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Acked-by: Adrien Grassein <adrien.grassein@gmail.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220922124306.34729-2-dev@pschenker.ch
2022-09-28perf tests vmlinux-kallsyms: Update is_ignored_symbol function to match the ↵Athira Rajeev
kernel ignored list The testcase “vmlinux-kallsyms.c” fails in powerpc. vmlinux symtab matches kallsyms: FAILED! This test look at the symbols in the vmlinux DSO and check if we find all of them in the kallsyms dso. But from the powerpc logs , observed that the failure happens for: ERR : 0xc0000000000fe9c8: .Lmfspr_table not on kallsyms ERR : 0xc0000000001009c8: .Lmtspr_table not on kallsyms These are labels ( with .L) in the source code and has to be ignored. Reference code with .Lmtspr_table: arch/powerpc/xmon/spr_access.S The testcases invokes is_ignored_symbol() function to ignore hidden symbols in the dso like local symbols. This function is adapted from is_ignored_symbol() kernel function in code: scripts/kallsyms.c . The kernel function got some updates which is not reflected in the testcase function and the new updates also handles ignoring "labels". Below is the changes that went in the kernel function. /* Symbol names that begin with the following are ignored.*/ static const char * const ignored_prefixes[] = { "$", /* local symbols for ARM, MIPS, etc. */ - ".LASANPC", /* s390 kasan local symbols */ + ".L", /* local labels, .LBB,.Ltmpxxx,.L__unnamed_xx,.LASANPC, etc. */ "__crc_", /* modversions */ "__efistub_", /* arm64 EFI stub namespace */ - "__kvm_nvhe_", /* arm64 non-VHE KVM namespace */ + "__kvm_nvhe_$", /* arm64 local symbols in non-VHE KVM namespace */ + "__kvm_nvhe_.L", /* arm64 local symbols in non-VHE KVM namespace */ "__AArch64ADRPThunk_", /* arm64 lld */ "__ARMV5PILongThunk_", /* arm lld */ "__ARMV7PILongThunk_", This change is part of below commits and will handle the symbols with “.L” commit d4c858643263 ("kallsyms: ignore all local labels prefixed by '.L'") commit 6ccf9cb557bd ("KVM: arm64: Symbolize the nVHE HYP addresses") Update the testcase function to include the new changes. Reported-by: Disha Goel <disgoel@linux.vnet.ibm.com> Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nageswara R Sastry <rnsastry@linux.ibm.com> Cc: linuxppc-dev@lists.ozlabs.org Link: https://lore.kernel.org/r/20220928045218.37322-1-atrajeev@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-09-28io_uring/net: don't skip notifs for failed requestsPavel Begunkov
We currently only add a notification CQE when the send succeded, i.e. cqe.res >= 0. However, it'd be more robust to do buffer notifications for failed requests as well in case drivers decide do something fanky. Always return a buffer notification after initial prep, don't hide it. This behaviour is better aligned with documentation and the patch also helps the userspace to respect it. Cc: stable@vger.kernel.org # 6.0 Suggested-by: Stefan Metzmacher <metze@samba.org> Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/9c8bead87b2b980fcec441b8faef52188b4a6588.1664292100.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-09-28spi: s3c64xx: Fix large transfers with DMAVincent Whitchurch
The COUNT_VALUE in the PACKET_CNT register is 16-bit so the maximum value is 65535. Asking the driver to transfer a larger size currently leads to the DMA transfer timing out. Implement ->max_transfer_size() and have the core split the transfer as needed. Fixes: 230d42d422e7 ("spi: Add s3c64xx SPI Controller driver") Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Link: https://lore.kernel.org/r/20220927112117.77599-5-vincent.whitchurch@axis.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-09-28spi: Split transfers larger than max sizeVincent Whitchurch
A couple of drivers call spi_split_transfers_maxsize() from their ->prepare_message() callbacks to split transfers which are too big for them to handle. Add support in the core to do this based on ->max_transfer_size() to avoid code duplication. Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Link: https://lore.kernel.org/r/20220927112117.77599-4-vincent.whitchurch@axis.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-09-28spi: Fix cache corruption due to DMA/PIO overlapVincent Whitchurch
The SPI core DMA mapping support performs cache management once for the entire message and not between transfers, and this leads to cache corruption if a message has two or more RX transfers with both transfers targeting the same cache line, and the controller driver decides to handle one using DMA and the other using PIO (for example, because one is much larger than the other). Fix it by syncing before/after the actual transfers. This also means that we can skip the sync during the map/unmap of the message. Fixes: 99adef310f68 ("spi: Provide core support for DMA mapping transfers") Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Link: https://lore.kernel.org/r/20220927112117.77599-3-vincent.whitchurch@axis.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-09-28spi: Save current RX and TX DMA devicesVincent Whitchurch
Save the current RX and TX DMA devices to avoid having to duplicate the logic to pick them, since we'll need access to them in some more functions to fix a bug in the cache handling. Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Link: https://lore.kernel.org/r/20220927112117.77599-2-vincent.whitchurch@axis.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-09-28ata: libata-sata: Fix device queue depth controlDamien Le Moal
The function __ata_change_queue_depth() uses the helper ata_scsi_find_dev() to get the ata_device structure of a scsi device and set that device maximum queue depth. However, when the ata device is managed by libsas, ata_scsi_find_dev() returns NULL, turning __ata_change_queue_depth() into a nop, which prevents the user from setting the maximum queue depth of ATA devices used with libsas based HBAs. Fix this by renaming __ata_change_queue_depth() to ata_change_queue_depth() and adding a pointer to the ata_device structure of the target device as argument. This pointer is provided by ata_scsi_change_queue_depth() using ata_scsi_find_dev() in the case of a libata managed device and by sas_change_queue_depth() using sas_to_ata_dev() in the case of a libsas managed ata device. Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Tested-by: John Garry <john.garry@huawei.com>
2022-09-28ata: libata-scsi: Fix initialization of device queue depthDamien Le Moal
For SATA devices supporting NCQ, drivers using libsas first initialize a scsi device queue depth based on the controller and device capabilities, leading to the scsi device queue_depth field being 32 (ATA maximum queue depth) for most setup. However, if libata was loaded using the force=[ID]]noncq argument, the default queue depth should be set to 1 to reflect the fact that queuable commands will never be used. This is consistent with manually setting a device queue depth to 1 through sysfs as that disables NCQ use for the device. Fix ata_scsi_dev_config() to honor the noncq parameter by sertting the device queue depth to 1 for devices that do not have the ATA_DFLAG_NCQ flag set. Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Tested-by: John Garry <john.garry@huawei.com>
2022-09-28netfilter: nft_fib: Fix for rpath check with VRF devicesPhil Sutter
Analogous to commit b575b24b8eee3 ("netfilter: Fix rpfilter dropping vrf packets by mistake") but for nftables fib expression: Add special treatment of VRF devices so that typical reverse path filtering via 'fib saddr . iif oif' expression works as expected. Fixes: f6d0cbcf09c50 ("netfilter: nf_tables: add fib expression") Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: Florian Westphal <fw@strlen.de>
2022-09-28ASoC: mediatek: mt8195: update audio tuner settingsTrevor Wu
Audio tuner is used to handle clock drift between 26M and APLL domain. It's expected when abs(chg_cnt) equals to upper bound, tuner updates pcw setting automatically, and then abs(chg_cnt) decreases. In the stress test, we found abs(chg_cnt) possibly equals to 2 at the unexpected timing. This results in wrong pcw updating. Finally, abs(chg_cnt) will always be larger than upper bound, As a result, we update the upper bound to 3 to handle the corner case. Signed-off-by: Trevor Wu <trevor.wu@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20220927151141.11846-1-trevor.wu@mediatek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-09-28drm/dp: Don't rewrite link config when setting phy test patternKhaled Almahallawy
The sequence for Source DP PHY CTS automation is [2][1]: 1- Emulate successful Link Training(LT) 2- Short HPD and change link rates and number of lanes by LT. (This is same flow for Link Layer CTS) 3- Short HPD and change PHY test pattern and swing/pre-emphasis levels (This step should not trigger LT) The problem is with DP PHY compliance setup as follow: [DPTX + on board LTTPR]------Main Link--->[Scope] ^ | | | | | ----------Aux Ch------>[Aux Emulator] At step 3, before writing TRAINING_LANEx_SET/LINK_QUAL_PATTERN_SET to declare the pattern/swing requested by scope, we write link config in LINK_BW_SET/LANE_COUNT_SET on a port that has LTTPR. As LTTPR snoops aux transaction, LINK_BW_SET/LANE_COUNT_SET writes indicate a LT will start [Check DP 2.0 E11 -Sec 3.6.8.2 & 3.6.8.6.3], and LTTPR will reset the link and stop sending DP signals to DPTX/Scope causing the measurements to fail. Note that step 3 will not trigger LT and DP link will never recovered by the Aux Emulator/Scope. The reset of link can be tested with a monitor connected to LTTPR port simply by writing to LINK_BW_SET or LANE_COUNT_SET as follow igt/tools/dpcd_reg write --offset=0x100 --value 0x14 --device=2 OR printf '\x14' | sudo dd of=/dev/drm_dp_aux2 bs=1 count=1 conv=notrunc seek=$((0x100)) This single aux write causes the screen to blank, sending short HPD to DPTX, setting LINK_STATUS_UPDATE = 1 in DPCD 0x204, and triggering LT. As stated in [1]: "Before any TX electrical testing can be performed, the link between a DPTX and DPRX (in this case, a piece of test equipment), including all LTTPRs within the path, shall be trained as defined in this Standard." In addition, changing Phy pattern/Swing/Pre-emphasis (Step 3) uses the same link rate and lane count applied on step 2, so no need to redo LT. The fix is to not rewrite link config in step 3, and just writes TRAINING_LANEx_SET and LINK_QUAL_PATTERN_SET [1]: DP 2.0 E11 - 3.6.11.1 LTTPR DPTX_PHY Electrical Compliance [2]: Configuring UnigrafDPTC Controller - Automation Test Sequence https://www.keysight.com/us/en/assets/9922-01244/help-files/ D9040DPPC-DisplayPort-Test-Software-Online-Help-latest.chm Cc: Imre Deak <imre.deak@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Or Cochvi <or.cochvi@intel.com> Signed-off-by: Khaled Almahallawy <khaled.almahallawy@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220916054900.415804-1-khaled.almahallawy@intel.com
generated by cgit (git 2.34.1) at 2025-09-23 20:38:58 +0000