| Age | Commit message (Collapse) | Author |
|---|
|
Add max77705 fuel gauge support.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Link: https://lore.kernel.org/r/20250108-starqltechn_integration_upstream-v14-2-f6e84ec20d96@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Add POWER_SUPPLY_HEALTH_UNDERVOLTAGE status for power supply
to report under voltage lockout failures.
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Link: https://lore.kernel.org/r/20250108-starqltechn_integration_upstream-v14-1-f6e84ec20d96@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Maxim PMICs may include fuel gauge with additional features, which is
out of single Linux power supply driver scope.
For example, in max77705 PMIC fuelgauge has additional registers, like
IIN_REG, VSYS_REG, ISYS_REG. Those needed to measure PMIC input current,
system voltage and current respectively. Those measurements cannot be
bound to any of fuelgauge properties.
The solution here add and option to use max17042 driver as a MFD sub
device, thus allowing any additional functionality be implemented as
another sub device. This will help to reduce code duplication in MFD
fuel gauge drivers.
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Link: https://lore.kernel.org/r/20250107-b4-max17042-v6-2-3d0104ad5bc7@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Fuelgauge blocks often are incorporated in bigger chip, which may use
only 1 line for interrupts. Make interrupt shared.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Link: https://lore.kernel.org/r/20250107-b4-max17042-v6-1-3d0104ad5bc7@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Use syscon_regmap_lookup_by_phandle_args() which is a wrapper over
syscon_regmap_lookup_by_phandle() combined with getting the syscon
argument. Except simpler code this annotates within one line that given
phandle has arguments, so grepping for code would be easier.
There is also no real benefit in printing errors on missing syscon
argument, because this is done just too late: runtime check on
static/build-time data. Dtschema and Devicetree bindings offer the
static/build-time check for this already.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250111185358.183725-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Replace ternary (condition ? "enable" : "disable") syntax with helpers
from string_choices.h because:
1. Simple function call with one argument is easier to read. Ternary
operator has three arguments and with wrapping might lead to quite
long code.
2. Is slightly shorter thus also easier to read.
3. It brings uniformity in the text - same string.
4. Allows deduping by the linker, which results in a smaller binary
file.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250114203611.1013324-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Make battery_modes a map between tokens and enum power_supply_charge_type
values instead of between tokens and strings and use the new
power_supply_charge_types_show/_parse() helpers for show()/store()
to ensure that things are handled in the same way as in other drivers.
This also changes battery_supported_modes to be a bitmap of charge-types
(enum power_supply_charge_type values) rather then a bitmap of indices
into battery_modes[].
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20241221125140.345776-2-hdegoede@redhat.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
notifier events
When the notifier is called we want to schedule the worker as
soon as possible. Thus it makes sense to reschedule any waiting
work and only queue a new one if there is none.
Suggested-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Signed-off-by: Sicelo A. Mhlongo <absicsz@gmail.com>
Link: https://lore.kernel.org/r/20241221161124.114989-1-absicsz@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Adds initial support for the STC3117 fuel gauge.
The driver provides functionality to monitor key parameters including:
Voltage, Current, State of Charge (SOC), Temperature, Status
Co-developed-by: Hardevsinh Palaniya <hardevsinh.palaniya@siliconsignals.io>
Signed-off-by: Hardevsinh Palaniya <hardevsinh.palaniya@siliconsignals.io>
Signed-off-by: Bhavin Sharma <bhavin.sharma@siliconsignals.io>
Link: https://lore.kernel.org/r/20241220084958.32367-3-bhavin.sharma@siliconsignals.io
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
The STC3117 provides a simple fuel gauge via I2C.
Add a DT schema to describe how to set it up in the device tree.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Hardevsinh Palaniya <hardevsinh.palaniya@siliconsignals.io>
Signed-off-by: Bhavin Sharma <bhavin.sharma@siliconsignals.io>
Link: https://lore.kernel.org/r/20241220084958.32367-2-bhavin.sharma@siliconsignals.io
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
The power-supply core already takes care of handling
POWER_SUPPLY_PROP_TECHNOLOGY based on the battery_info.
Drop the unnecessary handling from the driver.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20241215172133.178460-4-hdegoede@redhat.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
With DT properties charge-current-limit-gpios and
charge-current-limit-mapping one can define charge current limits in uA
using up to 32 GPIOs. At the moment the driver defaults to smallest charge
current limitation for safety reasons. When disabling charging is
supported, which should be common, the driver defaults to non charging on
probe. By having a default, charging can be enabled on probe for such
devices.
Signed-off-by: Dimitri Fedrau <dimitri.fedrau@liebherr.com>
Link: https://lore.kernel.org/r/20241218-default-charge-current-limit-v3-2-b26118cf06b5@liebherr.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
current limit
With DT properties charge-current-limit-gpios and
charge-current-limit-mapping one can define charge current limits in uA
using up to 32 GPIOs. Add property charge-current-limit-default-microamp
which selects a default charge current limit that must be listed in
charge-current-limit-mapping.
This is helpful when the smallest possible charge current limit is 0uA. The
driver defaults to the smallest possible value at the moment, which
disables charging on probe. With the default its possible to setup a safe
charge current limit.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Dimitri Fedrau <dimitri.fedrau@liebherr.com>
Link: https://lore.kernel.org/r/20241218-default-charge-current-limit-v3-1-b26118cf06b5@liebherr.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
__power_supply_changed_work()
The power-supply core is designed so that power-supply driver callbacks
such as get_property() and external_power_changed() will not be called
until the power-supply's parent driver's probe() function has completed.
There is a race where power_supply_changed() can be called for a supplier
of a power-supply which is being probed after the device_add() in
__power_supply_register() but before the parent driver's probe() function
has completed. Hitting this race breaks the power-supply core's design
to not call power-supply driver callbacks before probe() completion.
This problem is caused by __power_supply_changed_work() calling
the external_power_changed() directly rather then going through
the power_supply_external_power_changed() helper which correcly checks
psy->use_cnt .
Switch to using power_supply_external_power_changed() to fix this race.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20241215172133.178460-2-hdegoede@redhat.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Add and use wrapper functions for the sysfs interaction.
Restore the compatibility of CONFIG_POWER_SUPPLY=y and CONFIG_SYSFS=n.
Reported-by: Nathan Chancellor <nathan@kernel.org>
Closes: https://lore.kernel.org/lkml/20241218195229.GA2796534@ax162/
Fixes: 288a2cabcf6b ("power: supply: core: add UAPI to discover currently used extensions")
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20241219-psy-extensions-sysfs-v1-1-868fc6cb46d6@weissschuh.net
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Continuously track the charging status register in order to send uevents
whenever the state changes. Generate an uevent also when the chip's OTG
line is toggled, in bq2415x_notifier_call().
Signed-off-by: Sicelo A. Mhlongo <absicsz@gmail.com>
Link: https://lore.kernel.org/r/20241128085759.11840-2-absicsz@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
The bq27x00 gauges have an EEPROM register which contains the value of
the voltage that should be considered to be zero battery capacity. Expose
this to userspace using the VOLTAGE_MIN_DESIGN property.
Tested on Nokia N900 with bq27200.
Signed-off-by: Sicelo A. Mhlongo <absicsz@gmail.com>
Acked-by: Pali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/20241125151321.45440-1-absicsz@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
as3722_poweroff_probe
The return is executed on the devm_register_sys_off_handler() line in
as3722_poweroff_probe, so the last return line is unnecessary. Remove it.
Fixes: 348fde771ce7 ("power: reset: as3722-poweroff: Use devm_register_sys_off_handler(POWER_OFF)")
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Acked-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20241117053443.1148902-1-iwamatsu@nigauri.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
The BQ24297 is identical to the BQ24296 except that it uses USB D+ / D-
data-lines for charger-type (max. input-current) detection instead of
a PSEL input pin.
This is the same difference as between the already supported BQ24190
(D+ / D-) and the BQ24192 (PSEL).
Note just like with the BQ24190 vs BQ24192 there is no difference how
the charger-IC works at the register-level. The only difference is in
the external hardware interface.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20241116203648.169100-3-hdegoede@redhat.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
The BQ24297 is identical to the BQ24296 except that it uses USB D+ / D-
data-lines for charger-type (max. input-current) detection instead of
a PSEL input pin.
This is the same difference as between the already supported BQ24190
(D+ / D-) and the BQ24192 (PSEL).
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20241116203648.169100-1-hdegoede@redhat.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Userspace wants to now about the used power supply extensions,
for example to handle a device extended by a certain extension
differently or to discover information about the extending device.
Add a sysfs directory to the power supply device.
This directory contains links which are named after the used extension
and point to the device implementing that extension.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20241211-power-supply-extensions-v6-4-9d9dc3f3d387@weissschuh.net
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Power supply extensions provide an easier mechanism to implement
additional properties for existing power supplies.
Use that instead of reimplementing the sysfs attributes manually.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20241211-power-supply-extensions-v6-3-9d9dc3f3d387@weissschuh.net
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Merge the fixes branch into the development branch, since the it
contains multiple changes to the cros_charge-control driver needed to
convert it to the new power-supply extension framework.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Allow easy testing of the new power supply extension functionality.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20241211-power-supply-extensions-v6-2-9d9dc3f3d387@weissschuh.net
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Various drivers, mostly in platform/x86 extend the ACPI battery driver
with additional sysfs attributes to implement more UAPIs than are
exposed through ACPI by using various side-channels, like WMI,
nonstandard ACPI or EC communication.
While the created sysfs attributes look similar to the attributes
provided by the powersupply core, there are various deficiencies:
* They don't show up in uevent payload.
* They can't be queried with the standard in-kernel APIs.
* They don't work with triggers.
* The extending driver has to reimplement all of the parsing,
formatting and sysfs display logic.
* Writing a extension driver is completely different from writing a
normal power supply driver.
This extension API avoids all of these issues.
An extension is just a "struct power_supply_ext" with the same kind of
callbacks as in a normal "struct power_supply_desc".
The API is meant to be used via battery_hook_register(), the same way as
the current extensions.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20241211-power-supply-extensions-v6-1-9d9dc3f3d387@weissschuh.net
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
LTC4162-L 35V/3.2A Multi-Cell Lithium-Ion Step-Down Battery Charger
LTC4162-F 35V/3.2A Multi-Cell LiFePO4 Step-Down Battery Charger
LTC4162-S 35V/3.2A Lead-Acid Step-Down Battery Charger
LTC4015 35V/3.2A Multichemistry Buck Battery Charger Controller
The LTC4162-L/F/S variants and LTC4015 share a common set of registers.
The difference lies in the resolution value of the scaling factor for
battery voltage and battery current measurement, input voltage, and
input current for different battery chemistries. The difference also
includes the calculation of setting and getting the actual voltage
setting applied to the charge voltage, as well as getting the die
temperature. Adding chip info structure to encapsulates these
differences by defining function pointers and parameters specific to
each device. This structure includes:
- function pointers for getting and setting various parameters such as
battery voltage, charge voltage, and die temperature
- resolution parameters for battery current and input voltage
- telemetry mask to specify which bits in the register are used for
telemetry features
Signed-off-by: Kim Seer Paller <kimseer.paller@analog.com>
Link: https://lore.kernel.org/r/20241213023746.34168-3-kimseer.paller@analog.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Add LTC4162-F/S and LTC4015 to the supported devices of LTC4162-L.
They share a common set of registers. The only differences lie in the
resolution value of the scaling factor for battery voltage and battery
current measurement, input voltage, and input current for different
battery chemistries. The differences also include the calculation of
setting and getting the actual voltage applied to the charge voltage,
as well as getting the die temperature.
This add compatible entries for ltc4162-f/s and ltc4015 and include
datasheets for new devices.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Kim Seer Paller <kimseer.paller@analog.com>
Link: https://lore.kernel.org/r/20241213023746.34168-2-kimseer.paller@analog.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
The bq24190 power_supply class device has a writeable "charge_type"
property, add support for the new "charge_types" property. Reading this
returns a list of supported charge-types with the currently active type
surrounded by square brackets, allowing userspace to find out which
enum power_supply_charge_type values are supported.
This has been tested on a GPD win gaming-handheld.
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20241211174451.355421-4-hdegoede@redhat.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Add a new "charge_types" property, this is identical to "charge_type" but
reading returns a list of supported charge-types with the currently active
type surrounded by square brackets, e.g.:
Fast [Standard] "Long_Life"
This has the advantage over the existing "charge_type" property that this
allows userspace to find out which charge-types are supported for writable
charge_type properties.
Drivers which already support "charge_type" can easily add support for
this by setting power_supply_desc.charge_types to a bitmask representing
valid charge_type values. The existing "charge_type" get_property() and
set_property() code paths can be re-used for "charge_types".
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20241211174451.355421-3-hdegoede@redhat.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Add shutdown controller support for SAM9X7 SoC.
Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Link: https://lore.kernel.org/r/20241010120414.92993-1-varshini.rajendran@microchip.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Add power reset support for SAM9X7 SoC.
Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Link: https://lore.kernel.org/r/20241010120410.92942-1-varshini.rajendran@microchip.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Use sam9x7 pmc's compatible to lookup for in the SHDWC driver.
Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Link: https://lore.kernel.org/r/20241010120404.92893-1-varshini.rajendran@microchip.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Add shutdown controller DT bindings.
Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241010120425.93102-1-varshini.rajendran@microchip.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
When gpio-poweroff fails, a WARN_ON() is triggered without
an explanation to the user about the failure.
Add some comments explaining that the attempt to poweroff the system
via gpio-poweroff failed and convert it to a WARN() message with a
bit of context to provide some hint to the user.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20241212130456.580197-1-festevam@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Some enum style power-supply properties have text-values / labels for some
of the enum values containing a space, e.g. "Long Life" for
POWER_SUPPLY_CHARGE_TYPE_LONGLIFE.
Make power_supply_show_enum_with_available() replace these spaces with
'_' when showing the available text-values. After this the output for
a battery which supports "Long Life" will be e.g.:
Fast [Standard] Long_Life
or:
Fast Standard [Long_Life]
Modify power_supply_store_property() to accept both the original text-value
with space and the alternative value with the spaces replaced by '_'.
This allows users to write the value with '_' after seeing this on reading
the property.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20241209204051.8786-2-hdegoede@redhat.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Use the new, explicit accessor to go from a 'struct device' to its
'struct power_supply'.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20241210-power-supply-dev_to_psy-v2-14-9d8c9d24cfe4@weissschuh.net
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Use the new, explicit accessor to go from a 'struct device' to its
'struct power_supply'.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20241210-power-supply-dev_to_psy-v2-13-9d8c9d24cfe4@weissschuh.net
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Use the new, explicit accessor to go from a 'struct device' to its
'struct power_supply'.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20241210-power-supply-dev_to_psy-v2-12-9d8c9d24cfe4@weissschuh.net
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Use the new, explicit accessor to go from a 'struct device' to its
'struct power_supply'.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20241210-power-supply-dev_to_psy-v2-11-9d8c9d24cfe4@weissschuh.net
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Use the new, explicit accessor to go from a 'struct device' to its
'struct power_supply'.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20241210-power-supply-dev_to_psy-v2-10-9d8c9d24cfe4@weissschuh.net
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Use the new, explicit accessor to go from a 'struct device' to its
'struct power_supply'.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20241210-power-supply-dev_to_psy-v2-9-9d8c9d24cfe4@weissschuh.net
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Use the new, explicit accessor to go from a 'struct device' to its
'struct power_supply'.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20241210-power-supply-dev_to_psy-v2-8-9d8c9d24cfe4@weissschuh.net
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
The psy core and drivers currently use dev_get_drvdata() to go from a
'struct device' to its 'struct power_supply'.
This is not typesafe and or documented.
Introduce a new helper to make this pattern explicit.
Instead of using dev_get_drvdata(), use container_of_const() which
also preserves the constness.
Furthermore 'dev' does need to be dereferenced anymore and at some point
the drvdata could be reused for something else.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20241210-power-supply-dev_to_psy-v2-7-9d8c9d24cfe4@weissschuh.net
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
There are no users anymore. All potential future users are expected to
use power_supply_for_each_psy().
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20241210-power-supply-dev_to_psy-v2-6-9d8c9d24cfe4@weissschuh.net
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Simplify the callbacks by removing the need to convert a 'struct device'
into a 'struct power_supply'.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20241210-power-supply-dev_to_psy-v2-5-9d8c9d24cfe4@weissschuh.net
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Simplify the callbacks by removing the need to convert a 'struct device'
into a 'struct power_supply'.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20241210-power-supply-dev_to_psy-v2-4-9d8c9d24cfe4@weissschuh.net
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Simplify the callbacks by removing the need to convert a 'struct device'
into a 'struct power_supply'.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20241210-power-supply-dev_to_psy-v2-3-9d8c9d24cfe4@weissschuh.net
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
All existing callers of power_supply_for_each_device() want to iterate
over 'struct power_supply', not 'struct device'.
The power_supply_for_each_device() forces each caller to duplicate the
logic to go from one to the other.
Introduce power_supply_for_each_psy() to simplify the callers.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20241210-power-supply-dev_to_psy-v2-2-9d8c9d24cfe4@weissschuh.net
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Instead of directly accessing the structure member, use the accessor.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20241210-power-supply-dev_to_psy-v2-1-9d8c9d24cfe4@weissschuh.net
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
ECs implementing the v2 command will not stop charging when the end
threshold is reached. Instead they will begin discharging until the
start threshold is reached, leading to permanent charge and discharge
cycles. This defeats the point of the charge control mechanism.
Avoid the issue by hiding the start threshold on v2 systems.
Instead on those systems program the EC with start == end which forces
the EC to reach and stay at that level.
v1 does not support thresholds and v3 works correctly,
at least judging from the code.
Reported-by: Thomas Koch <linrunner@gmx.net>
Fixes: c6ed48ef5259 ("power: supply: add ChromeOS EC based charge control driver")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20241208-cros_charge-control-v2-v1-3-8d168d0f08a3@weissschuh.net
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
