| Age | Commit message (Collapse) | Author |
|---|
|
'sdhci-esdhc-imx' driver
Since NXP S32G2 and S32G3 SoCs share the SDHCI controller with
I.MX platforms it would be valuable to add 's32@nxp.com' as a
relevant mailing list in this area.
Signed-off-by: Ciprian Costea <ciprianmarian.costea@oss.nxp.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Haibo Chen <haibo.chen@nxp.com>
Link: https://lore.kernel.org/r/20240708121018.246476-4-ciprianmarian.costea@oss.nxp.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The I.MX SDHCI driver assumes that the frequency of the 'per' clock
can be obtained even on disabled clocks, which is not always the case.
According to 'clk_get_rate' documentation, it is only valid
once the clock source has been enabled.
Signed-off-by: Ciprian Costea <ciprianmarian.costea@oss.nxp.com>
Reviewed-by: Haibo Chen <haibo.chen@nxp.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20240708121018.246476-3-ciprianmarian.costea@oss.nxp.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
In case of S32G based platforms, GPIO CD used for card detect
wake mechanism is not available.
For this scenario the newly introduced flag
'ESDHC_FLAG_SKIP_CD_WAKE' is used.
Signed-off-by: Ciprian Costea <ciprianmarian.costea@oss.nxp.com>
Reviewed-by: Haibo Chen <haibo.chen@nxp.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20240708121018.246476-2-ciprianmarian.costea@oss.nxp.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
There is no reason to restrict access to this attribute, as it merely
reports whether crash elfcorehdr is automatically updated on CPU hot
plug/unplug and/or online/offline events.
Note that since commit 79365026f8694 ("crash: add a new kexec flag for
hotplug support"), this maps to the same flag which is world-accessible
through /sys/devices/system/memory/crash_hotplug.
Signed-off-by: Petr Tesarik <ptesarik@suse.com>
Acked-by: Baoquan He <bhe@redhat.com>
Acked-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Link: https://lore.kernel.org/r/20240711103409.319673-1-petr.tesarik@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The Lenovo Yoga C630 Embedded Controller is only present on the Qualcomm
Snapdragon-based Lenovo Yoga C630 laptop. Hence add a dependency on
ARCH_QCOM, to prevent asking the user about this driver when configuring
a kernel without Qualcomm SoC support.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/0e4c9ffdc8a5caffcda2afb8d5480900f7adebf6.1720707932.git.geert+renesas@glider.be
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Log errors are the most widely used mechanism for reporting issues in
the kernel. When an error is logged using the device helpers, eg
dev_err(), it gets metadata attached that identifies the subsystem and
device where the message is coming from. Introduce a new test that makes
use of that metadata to report which devices logged errors (or more
critical messages).
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240705-dev-err-log-selftest-v2-3-163b9cd7b3c1@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Move the ksft python module, which provides generic helpers for
kselftests, to a common directory so it can be more easily shared
between different tests.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240705-dev-err-log-selftest-v2-2-163b9cd7b3c1@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Move the discoverable devices test to a subdirectory to allow other
related tests to be added to the devices directory.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240705-dev-err-log-selftest-v2-1-163b9cd7b3c1@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The Acer Aspire 1 Embedded Controller is only present on the Qualcomm
Snapdragon-based Acer Aspire 1 laptop. Hence add a dependency on
ARCH_QCOM, to prevent asking the user about this driver when configuring
a kernel without Qualcomm SoC support.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Nikita Travkin <nikita@trvn.ru>
Link: https://lore.kernel.org/r/f5f38709c01d369ed9e375ceb2a9a12986457a1a.1720707932.git.geert+renesas@glider.be
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The test case logic is implemented by the functions compiled as
part of the core Xe driver module and then exported to build and
register the test suite in the live test module.
But we don't need to export individual test case functions, we may
just export the entire test suite. And we don't need to register
this test suite in a separate file, it can be done in the main
file of the live test module.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240708111210.1154-5-michal.wajdeczko@intel.com
|
|
The test case logic is implemented by the functions compiled as
part of the core Xe driver module and then exported to build and
register the test suite in the live test module.
But we don't need to export individual test case functions, we may
just export the entire test suite. And we don't need to register
this test suite in a separate file, it can be done in the main
file of the live test module.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240708111210.1154-4-michal.wajdeczko@intel.com
|
|
The test case logic is implemented by the functions compiled as
part of the core Xe driver module and then exported to build and
register the test suite in the live test module.
But we don't need to export individual test case functions, we may
just export the entire test suite. And we don't need to register
this test suite in a separate file, it can be done in the main
file of the live test module.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240708111210.1154-3-michal.wajdeczko@intel.com
|
|
The test case logic is implemented by the functions compiled as
part of the core Xe driver module and then exported to build and
register the test suite in the live test module.
But we don't need to export individual test case functions, we may
just export the entire test suite. And we don't need to register
this test suite in a separate file, it can be done in the main
file of the live test module.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240708111210.1154-2-michal.wajdeczko@intel.com
|
|
DPI hardware is an on-chip PCIe device on Marvell's arm64 SoC
platforms. As Arnd suggested, CN10K belongs to ARCH_THUNDER
lineage.
Patch makes mrvl_cn10k_dpi driver dependent on CONFIG_ARCH_THUNDER.
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Link: https://lore.kernel.org/r/20240711120115.4069401-1-vattunuru@marvell.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/virtio/virtio_dma_buf.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240602-md-virtio_dma_buf-v1-1-ce602d47e257@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
With ARCH=powerpc, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/char/agp/uninorth-agp.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://lore.kernel.org/r/20240615-md-powerpc-drivers-char-agp-v1-1-b79bfd07da42@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/spmi/hisi-spmi-controller.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/spmi/spmi-pmic-arb.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240609-md-drivers-spmi-v1-1-f1d5b24e7a66@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
It's unused and can be replaced with VISIBLE_IF_KUNIT if needed.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240705191057.1110-3-michal.wajdeczko@intel.com
|
|
We shouldn't use custom helper if there is a official one.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240705191057.1110-2-michal.wajdeczko@intel.com
|
|
The remove callback's return value is about to change from int to void,
this is done by commit 0edb555a65d1 ("platform: Make
platform_driver::remove() return void"). Prepare for merging the patch by
switching the PiSP driver from remove to remove_new callback.
Fixes: 12187bd5d4f8 ("media: raspberrypi: Add support for PiSP BE")
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Naushir Patuck <naush@raspberrypi.com>
Acked-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Complete the pisp_be_config strcture by adding fields that even if not
written to the HW are relevant to complete the uAPI and put it in par
with the BSP driver.
Fixes: c6c49bac8770 ("media: uapi: Add Raspberry Pi PiSP Back End uAPI")
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The order of the members of pisp_be_tiles_config is relevant
as the driver logic assumes 'config' to be at offset 0.
Re-sort the member to match the driver's expectations.
Fixes: c6c49bac8770 ("media: uapi: Add Raspberry Pi PiSP Back End uAPI")
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Acked-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The macro used to inspect an image format characteristic use a mixture
of capitalized and non-capitalized letters, which is rather unusual for
the Linux kernel style.
Capitalize all identifiers.
Fixes: c6c49bac8770 ("media: uapi: Add Raspberry Pi PiSP Back End uAPI")
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Add definition and test for 32-bits image formats to the pisp_common.h
uAPI header.
Fixes: c6c49bac8770 ("media: uapi: Add Raspberry Pi PiSP Back End uAPI")
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Acked-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The pisp_be_config.h uAPI header file contains a bit-field definition
that uses the BIT() helper macro.
As the BIT() identifier is not defined in userspace, drop it from the
uAPI header.
Fixes: c6c49bac8770 ("media: uapi: Add Raspberry Pi PiSP Back End uAPI")
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
While efi_memory_attributes_table_t::entry isn't used directly as an
array, it is used as a base for pointer arithmetic. The type is wrong
as it's not technically an array of efi_memory_desc_t's; they could be
larger. Regardless, leave the type unchanged and remove the old style
"0" array size. Additionally replace the open-coded entry offset code
with the existing efi_memdesc_ptr() helper.
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
The "early" part of the helper's name isn't accurate[1]. Drop it in
preparation for adding a new (not early) usage.
Suggested-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/lkml/CAMj1kXEyDjH0uu3Z4eBesV3PEnKGi5ArXXMp7R-hn8HdRytiPg@mail.gmail.com [1]
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Documentation say that clock internal config needs to be set BEFORE chip
is enabled. Align code to this and move the CHIP enable after the CHIP
is configured.
While at it also make use of STATUS reg and check when STARTUP is
completed instead of sleep for 1-2 ms.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://lore.kernel.org/r/20240712004556.15601-3-ansuelsmth@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Better handle enabling clock internal setting. In further testing it was
notice that internal clock config MUST be set before clock output config
or the LED CHIP might stop working.
This wasn't documented and was actually found on devices that have 2
chip chained where one chip provide clock for the other.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://lore.kernel.org/r/20240712004556.15601-2-ansuelsmth@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Remove extra x from driver name as this was a typo from copy-paste
error.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://lore.kernel.org/r/20240712004556.15601-1-ansuelsmth@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Commit 9a427556fb8e ("vmlinux.lds.h: catch compound literals into
data and BSS") added catches for .data..L* and .rodata..L* but missed
.bss..L*
Since commit 5431fdd2c181 ("ptrace: Convert ptrace_attach() to use
lock guards") the following appears at build:
LD .tmp_vmlinux.kallsyms1
powerpc64-linux-ld: warning: orphan section `.bss..Lubsan_data33' from `kernel/ptrace.o' being placed in section `.bss..Lubsan_data33'
NM .tmp_vmlinux.kallsyms1.syms
KSYMS .tmp_vmlinux.kallsyms1.S
AS .tmp_vmlinux.kallsyms1.S
LD .tmp_vmlinux.kallsyms2
powerpc64-linux-ld: warning: orphan section `.bss..Lubsan_data33' from `kernel/ptrace.o' being placed in section `.bss..Lubsan_data33'
NM .tmp_vmlinux.kallsyms2.syms
KSYMS .tmp_vmlinux.kallsyms2.S
AS .tmp_vmlinux.kallsyms2.S
LD vmlinux
powerpc64-linux-ld: warning: orphan section `.bss..Lubsan_data33' from `kernel/ptrace.o' being placed in section `.bss..Lubsan_data33'
Lets add .bss..L* to BSS_MAIN macro to catch those sections into BSS.
Fixes: 9a427556fb8e ("vmlinux.lds.h: catch compound literals into data and BSS")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202404031349.nmKhyuUG-lkp@intel.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The to-be-fixed commit rightfully prevented that the registers will be
cleared. However, the index must be cleared. Otherwise a read message
will re-issue the last work. Fix it and add a comment describing the
situation.
Fixes: c422b6a63024 ("i2c: testunit: don't erase registers after STOP")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
esp_xmit() is already able to handle UDP encapsulation through the call to
esp_output_head(). However, the ESP header and the outer IP header
are not correct and need to be corrected.
Test: Enabled both dir=in/out IPsec crypto offload, and verified IPv4
UDP-encapsulated ESP packets on both wifi/cellular network
Signed-off-by: Mike Yu <yumike@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
If xfrm_input() is called with UDP_ENCAP_ESPINUDP, the packet is
already processed in UDP layer that removes the UDP header.
Therefore, there should be no much difference to treat it as an
ESP packet in the XFRM stack.
Test: Enabled dir=in IPsec crypto offload, and verified IPv4
UDP-encapsulated ESP packets on both wifi/cellular network
Signed-off-by: Mike Yu <yumike@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Unblock this limitation so that SAs with encapsulation specified
can be passed to HW drivers. HW drivers can still reject the SA
in their implementation of xdo_dev_state_add if the encapsulation
is not supported.
Test: Verified on Android device
Signed-off-by: Mike Yu <yumike@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
IPsec crypt offload supports outbound IPv6 ESP packets, but it doesn't
support inbound IPv6 ESP packets.
This change enables the crypto offload for inbound IPv6 ESP packets
that are not handled through GRO code path. If HW drivers add the
offload information to the skb, the packet will be handled in the
crypto offload rx code path.
Apart from the change in crypto offload rx code path, the change
in xfrm_policy_check is also needed.
Exampe of RX data path:
+-----------+ +-------+
| HW Driver |-->| wlan0 |--------+
+-----------+ +-------+ |
v
+---------------+ +------+
+------>| Network Stack |-->| Apps |
| +---------------+ +------+
| |
| v
+--------+ +------------+
| ipsec1 |<--| XFRM Stack |
+--------+ +------------+
Test: Enabled both in/out IPsec crypto offload, and verified IPv6
ESP packets on Android device on both wifi/cellular network
Signed-off-by: Mike Yu <yumike@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
block
It would be possible to put any statement in TP_fast_assign().
This commit obsoletes the helper function and put its statements to
TP_fast_assign() for the code simplicity.
Link: https://lore.kernel.org/r/20240712003010.87341-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.10-2024-07-11:
amdgpu:
- PSR-SU fix
- Reseved VMID fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240712005534.803064-1-alexander.deucher@amd.com
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
UAPI Changes:
- Use write-back caching mode for system memory on DGFX (Thomas)
Driver Changes:
- Do not leak object when finalizing hdcp gsc (Nirmoy)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/vgqz35btnxdddko3byrgww5ii36wig2tvondg2p3j3b3ourj4i@rqgolll3wwkh
|
|
Prior to commit dc6fcaaba5a5 ("drm/omap: Allow build with
COMPILE_TEST=y"), it was only possible to build the omapdrm driver with
a 4KB page size. After that change, when the PAGE_SIZE is 64KB or
larger, clang points out that the driver has some assumptions around the
page size implicitly by passing PAGE_SIZE to a parameter with a type of
u16:
drivers/gpu/drm/omapdrm/omap_gem.c:758:7: error: implicit conversion from 'unsigned long' to 'u16' (aka 'unsigned short') changes value from 65536 to 0 [-Werror,-Wconstant-conversion]
757 | block = tiler_reserve_2d(fmt, omap_obj->width, omap_obj->height,
| ~~~~~~~~~~~~~~~~
758 | PAGE_SIZE);
| ^~~~~~~~~
arch/powerpc/include/asm/page.h:25:34: note: expanded from macro 'PAGE_SIZE'
25 | #define PAGE_SIZE (ASM_CONST(1) << PAGE_SHIFT)
| ~~~~~~~~~~~~~^~~~~~~~~~~~~
drivers/gpu/drm/omapdrm/omap_gem.c:1504:44: error: implicit conversion from 'unsigned long' to 'u16' (aka 'unsigned short') changes value from 65536 to 0 [-Werror,-Wconstant-conversion]
1504 | block = tiler_reserve_2d(fmts[i], w, h, PAGE_SIZE);
| ~~~~~~~~~~~~~~~~ ^~~~~~~~~
arch/powerpc/include/asm/page.h:25:34: note: expanded from macro 'PAGE_SIZE'
25 | #define PAGE_SIZE (ASM_CONST(1) << PAGE_SHIFT)
| ~~~~~~~~~~~~~^~~~~~~~~~~~~
2 errors generated.
As there is a lot of use of a u16 type throughout this driver and it
will only ever be run on hardware that has a 4KB page size, just
restrict compile testing to when the page size is less than 64KB (as no
other issues have been discussed and it keeps compile testing relatively
more available).
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240620-omapdrm-restrict-compile-test-to-sub-64kb-page-size-v1-1-5e56de71ffca@kernel.org
|
|
When handling colliding L2TPv3 session IDs, we use the existing
session IDR entry and link the new session on that using
session->coll_list. However, when using an existing IDR entry, we must
not do the idr_replace step.
Fixes: aa5e17e1f5ec ("l2tp: store l2tpv3 sessions in per-net IDR")
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
UAPI Changes:
- Rename xe perf layer as xe observation layer (Ashutosh)
Driver Changes:
- Drop trace_xe_hw_fence_free (Brost)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Zo_3ustogPDVKZwu@intel.com
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
A fix for fbdev on big endian systems, a condition fix for a sharp panel
at removal, and a fix for qxl to prevent unpinned buffer access under
certain conditions.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240711-benign-rich-mouflon-2eeafe@houat
|
|
link_is_up() and tipc_link_is_up() have the same functionality.
Consolidate these functions.
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Reviewed-by: Tung Nguyen <tung.q.nguyen@endava.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
struct tipc_name_table in core.h is not used. Remove this declaration.
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Reviewed-by: Tung Nguyen <tung.q.nguyen@endava.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 732b32daef80 ("powerpc: Remove core support for 40x") removed 40x.
Update documentation accordingly.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/c2d64bebc514ca892a12e51a68821a6317048d3a.1720694954.git.christophe.leroy@csgroup.eu
|
|
Remove stale references to 40x.
Fixes: e939da89d024 ("powerpc: Remove 40x from Kconfig and defconfig")
Fixes: 548f5244f106 ("powerpc/40x: Remove EP405")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/ab30ae302783d8617d407864b92db1b926ab5ab9.1720694914.git.christophe.leroy@csgroup.eu
|
|
Breno Leitao says:
====================
netconsole: improve code clarity
These changes aim to enhance the reliability of netconsole by
eliminating the potential race condition and improve maintainability
by making the code more straightforward to understand and modify.
====================
Link: https://patch.msgid.link/20240709144403.544099-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When disabling a netconsole target, enabled_store() is called with
enabled=false. Currently, this results in updating the nt->enabled
field twice:
1. Inside the if/else block, with the target_list_lock spinlock held
2. Later, without the target_list_lock
This patch eliminates the redundancy by setting the field only once,
improving efficiency and reducing potential race conditions.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20240709144403.544099-3-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The 'enabled' variable is already a bool, so casting it to its value
is redundant.
Remove the superfluous cast, improving code clarity without changing
functionality.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20240709144403.544099-2-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
