summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-07-23video: ssd1307fb: Handle width and height that are not multiple of 8Marko Kohtala
Some displays have dimensions that are not multiple of eight, for example height of 36, but the driver divided the dimensions by 8. Defining display to the next multiple of 8 is not good as then the display registers get configured to dimensions that do not match. This contradicts intructions by some display manufacturers. Use DIV_ROUND_UP to multiple of 8 when needed so correct values can be used. The ssd1307fb_update_display bit reordering receives a simplification in the process. Signed-off-by: Marko Kohtala <marko.kohtala@okoko.fi> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: David Airlie <airlied@linux.ie> Cc: Michal Vokáč <michal.vokac@ysoft.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190618074111.9309-5-marko.kohtala@okoko.fi
2019-07-23video: ssd1307fb: Start page range at page_offsetMarko Kohtala
The page_offset was only applied to the end of the page range. This caused the display updates to cause a scrolling effect on the display because the amount of data written to the display did not match the range display expected. Fixes: 301bc0675b67 ("video: ssd1307fb: Make use of horizontal addressing mode") Signed-off-by: Marko Kohtala <marko.kohtala@okoko.fi> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: David Airlie <airlied@linux.ie> Cc: Michal Vokáč <michal.vokac@ysoft.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190618074111.9309-4-marko.kohtala@okoko.fi
2019-07-23video: ssd1307fb: Remove unneeded semicolonsMarko Kohtala
coccicheck reported unneeded semicolons. Remove them. Signed-off-by: Marko Kohtala <marko.kohtala@okoko.fi> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: David Airlie <airlied@linux.ie> Cc: Michal Vokáč <michal.vokac@ysoft.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190618074111.9309-3-marko.kohtala@okoko.fi
2019-07-23video: ssd1307fb: Use screen_buffer instead of screen_baseMarko Kohtala
sparse reported incorrect type due to different address spaces. The screen_base is __iomem, but the memory is not from a device so we can use screen_buffer instead and avoid some type casts. Signed-off-by: Marko Kohtala <marko.kohtala@okoko.fi> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: David Airlie <airlied@linux.ie> Cc: Michal Vokáč <michal.vokac@ysoft.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190618074111.9309-2-marko.kohtala@okoko.fi
2019-07-23video: fbdev-MMP: Remove call to memset after dma_alloc_coherentFuqian Huang
In commit 518a2f1925c3 ("dma-mapping: zero memory returned from dma_alloc_*"), dma_alloc_coherent has already zeroed the memory. So memset is not needed. Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190715032017.7311-1-huangfq.daxian@gmail.com
2019-07-23video: fbdev: nvidia: Remove dead codeSouptick Joarder
This is dead code since 3.15. If there is no plan to use it further, this can be removed forever. Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Cc: Antonino Daplas <adaplas@gmail.com> Cc: Sabyasachi Gupta <sabyasachi.linux@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/1562782586-3994-1-git-send-email-jrdr.linux@gmail.com
2019-07-23video: fbdev: nvidia: Remove extra returnSouptick Joarder
Minor cleanup to remove extra return statement. Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Cc: Antonino Daplas <adaplas@gmail.com> Cc: Sabyasachi Gupta <sabyasachi.linux@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/1562781795-3494-1-git-send-email-jrdr.linux@gmail.com
2019-07-23au1200fb: don't use DMA_ATTR_NON_CONSISTENTChristoph Hellwig
au1200fb allocates DMA memory using DMA_ATTR_NON_CONSISTENT, but never calls dma_cache_sync to synchronize the memory between the CPU and the device. If it was use on a not cache coherent bus that would be fatal, but as far as I can tell from the naming and the mips platform implementation it always is used in cache coherent systems. Remove the DMA_ATTR_NON_CONSISTENT flag, which is a no-op in that case. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190625121321.10197-1-hch@lst.de
2019-07-23fbmem: remove redundant assignment to errColin Ian King
Variable err is initialized to a value that is never read and it is re-assigned later. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190624223724.13629-1-colin.king@canonical.com
2019-07-23ACPI/IORT: Fix off-by-one check in iort_dev_find_its_id()Lorenzo Pieralisi
Static analysis identified that index comparison against ITS entries in iort_dev_find_its_id() is off by one. Update the comparison condition and clarify the resulting error message. Fixes: 4bf2efd26d76 ("ACPI: Add new IORT functions to support MSI domain handling") Link: https://lore.kernel.org/linux-arm-kernel/20190613065410.GB16334@mwanda/ Reviewed-by: Hanjun Guo <guohanjun@huawei.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Will Deacon <will@kernel.org> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Will Deacon <will@kernel.org>
2019-07-23drm/tinydrm: Move tinydrm_display_pipe_init() to mipi-dbiNoralf Trønnes
tinydrm_display_pipe_init() has only one user now, so move it to mipi-dbi. Changes: - Remove drm_connector_helper_funcs.detect, it's always connected. - Store the connector and mode in mipi_dbi instead of it's own struct. Otherwise remove some leftover tinydrm-helpers.h inclusions. Cc: Eric Anholt <eric@anholt.net> Cc: David Lechner <david@lechnology.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190719155916.62465-12-noralf@tronnes.org
2019-07-23drm/tinydrm/mipi-dbi: Add mipi_dbi_init_with_formats()Noralf Trønnes
The MIPI DBI standard support more pixel formats than what this helper supports. Add an init function that lets the driver use different format(s). This avoids open coding mipi_dbi_init() in st7586. st7586 sets preferred_depth but this is not necessary since it only supports one format. v2: Forgot to remove the mipi->rotation assignment in st7586, mipi_dbi_init_with_formats() handles it. Cc: David Lechner <david@lechnology.com> Acked-by: David Lechner <david@lechnology.com> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Tested-by: David Lechner <david@lechnology.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190719155916.62465-11-noralf@tronnes.org
2019-07-23drm/tinydrm/repaper: Don't use tinydrm_display_pipe_init()Noralf Trønnes
tinydrm.ko is going away so let's implement a connector. Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190719155916.62465-10-noralf@tronnes.org
2019-07-23drm/tinydrm: Move tinydrm_machine_little_endian()Noralf Trønnes
The tinydrm helper is going away so move it into the only user mipi-dbi. Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190719155916.62465-9-noralf@tronnes.org
2019-07-23drm/tinydrm: Move tinydrm_spi_transfer()Noralf Trønnes
This is only used by mipi-dbi drivers so move it there. The reason this isn't moved to the SPI subsystem is that it will in a later patch pass a dummy rx buffer for SPI controllers that need this. Low memory boards (64MB) can run into a problem allocating such a "large" contiguous buffer on every transfer after a long up time. This leaves a very specific use case, so we'll keep the function here. mipi-dbi will first go through a refactoring though, before this will be done. Remove SPI todo entry now that we're done with the tinydrm.ko SPI code. v2: Drop moving the mipi_dbi_spi_init() declaration (Sam) Cc: David Lechner <david@lechnology.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: : David Lechner <david@lechnology.com> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190719155916.62465-8-noralf@tronnes.org
2019-07-23drm/tinydrm: Clean up tinydrm_spi_transfer()Noralf Trønnes
Prep work before moving the function to mipi-dbi. tinydrm_spi_transfer() was made to support one class of drivers in drivers/staging/fbtft that has not been converted to DRM yet, so strip away the unused functionality: - Start byte (header) is not used. - No driver relies on the automatic 16-bit byte swapping on little endian machines with SPI controllers only supporting 8 bits per word. Other changes: - No need to initialize ret - No need for the WARN since mipi-dbi only uses 8 and 16 bpw. - Use spi_message_init_with_transfers() Cc: David Lechner <david@lechnology.com> Acked-by: : David Lechner <david@lechnology.com> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190719155916.62465-7-noralf@tronnes.org
2019-07-23drm/tinydrm: Remove tinydrm_spi_max_transfer_size()Noralf Trønnes
spi-bcm2835 can handle >64kB buffers now so there is no need to check ->max_dma_len. The tinydrm_spi_max_transfer_size() max_len argument is not used by any callers, so not needed. Then we have the spi_max module parameter. It was added because staging/fbtft has support for it and there was a report that someone used it to set a small buffer size to avoid popping on a USB soundcard on a Raspberry Pi. In hindsight it shouldn't have been added, I should have waited for it to become a problem first. I don't know it anyone is actually using it, but since tinydrm_spi_transfer() is being moved to mipi-dbi, I'm taking the opportunity to remove it. I'll add it back to mipi-dbi if someone complains. With that out of the way, spi_max_transfer_size() can be used instead. The chosen 16kB buffer size for Type C Option 1 (9-bit) interface is somewhat arbitrary, but a bigger buffer will have a miniscule impact on transfer speed, so it's probably fine. Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190719155916.62465-6-noralf@tronnes.org
2019-07-23drm/tinydrm: Remove spi debug buffer dumpingNoralf Trønnes
The SPI event tracing can dump the buffer now so no need for this. Remove the debug print from tinydrm_spi_transfer() since this info can be gleaned from the trace event. Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190719155916.62465-5-noralf@tronnes.org
2019-07-23drm/tinydrm: Use spi_is_bpw_supported()Noralf Trønnes
This means that tinydrm_spi_bpw_supported() can be removed. Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190719155916.62465-4-noralf@tronnes.org
2019-07-23drm/tinydrm: Use DRM_MODE_CONNECTOR_SPINoralf Trønnes
tinydrm drivers announce DRM_MODE_CONNECTOR_VIRTUAL for its SPI drivers. Use the new SPI connector type instead. X server will now list the connector as Unknown instead of Virtual: X.Org X Server 1.19.2 Release Date: 2017-03-02 <...> [ 53523.905] (II) modeset(0): Output Unknown19-1 has no monitor section [ 53523.908] (II) modeset(0): EDID for output Unknown19-1 [ 53523.910] (II) modeset(0): Printing probed modes for output Unknown19-1 [ 53523.911] (II) modeset(0): Modeline "320x240"x0.0 0.00 320 320 320 320 240 240 240 240 (0.0 kHz eP) [ 53523.911] (II) modeset(0): Output Unknown19-1 connected [ 53523.912] (II) modeset(0): Using exact sizes for initial modes [ 53523.912] (II) modeset(0): Output Unknown19-1 using initial mode 320x240 +0+0 I won't chase down and fix userspace, but the new connector type will trickle out to userspace eventually. v2: Split patch in core and driver changes, expand commit message (Daniel) Cc: David Lechner <david@lechnology.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: David Lechner <david@lechnology.com> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190719155916.62465-3-noralf@tronnes.org
2019-07-23drm: Add SPI connector typeNoralf Trønnes
tinydrm drivers announce DRM_MODE_CONNECTOR_VIRTUAL for its SPI drivers. Add a SPI connector type to match the actual connector. X will list the connector as Unknown: X.Org X Server 1.19.2 Release Date: 2017-03-02 <...> [ 53523.905] (II) modeset(0): Output Unknown19-1 has no monitor section [ 53523.908] (II) modeset(0): EDID for output Unknown19-1 [ 53523.910] (II) modeset(0): Printing probed modes for output Unknown19-1 [ 53523.911] (II) modeset(0): Modeline "320x240"x0.0 0.00 320 320 320 320 240 240 240 240 (0.0 kHz eP) [ 53523.911] (II) modeset(0): Output Unknown19-1 connected [ 53523.912] (II) modeset(0): Using exact sizes for initial modes [ 53523.912] (II) modeset(0): Output Unknown19-1 using initial mode 320x240 +0+0 The weston source shows that it will be listed as UNNAMED. v2: Split patch in core and driver changes, expand commit message (Daniel) Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: David Lechner <david@lechnology.com> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190719155916.62465-2-noralf@tronnes.org
2019-07-23drbd: dynamically allocate shash descriptorArnd Bergmann
Building with clang and KASAN, we get a warning about an overly large stack frame on 32-bit architectures: drivers/block/drbd/drbd_receiver.c:921:31: error: stack frame size of 1280 bytes in function 'conn_connect' [-Werror,-Wframe-larger-than=] We already allocate other data dynamically in this function, so just do the same for the shash descriptor, which makes up most of this memory. Link: https://lore.kernel.org/lkml/20190617132440.2721536-1-arnd@arndb.de/ Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Roland Kammerer <roland.kammerer@linbit.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-07-23block: blk-mq: Remove blk_mq_sched_started_request and started_requestMarcos Paulo de Souza
blk_mq_sched_completed_request is a function that checks if the elevator related to the request has started_request implemented, but currently, none of the available IO schedulers implement started_request, so remove both. Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-07-23fbdev: Ditch fb_edid_add_monspecsDaniel Vetter
It's dead code ever since commit 34280340b1dc74c521e636f45cd728f9abf56ee2 Author: Geert Uytterhoeven <geert+renesas@glider.be> Date: Fri Dec 4 17:01:43 2015 +0100 fbdev: Remove unused SH-Mobile HDMI driver Also with this gone we can remove the cea_modes db. This entire thing is massively incomplete anyway, compared to the CEA parsing that drm_edid.c does. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Tavis Ormandy <taviso@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190721201956.941-1-daniel.vetter@ffwll.ch
2019-07-23ALSA: ac97: Fix double free of ac97_codec_deviceDing Xiang
put_device will call ac97_codec_release to free ac97_codec_device and other resources, so remove the kfree and other redundant code. Fixes: 74426fbff66e ("ALSA: ac97: add an ac97 bus") Signed-off-by: Ding Xiang <dingxiang@cmss.chinamobile.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-07-23perf build: Do not use -Wshadow on gcc < 4.8Arnaldo Carvalho de Melo
As it is too strict, see https://lkml.org/lkml/2006/11/28/253 and https://gcc.gnu.org/gcc-4.8/changes.html, that takes into account Linus's comments (search for Wshadow) for the reasoning about -Wshadow not being interesting before gcc 4.8. Acked-by: Andrii Nakryiko <andrii.nakryiko@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/r/20190719183417.GQ3624@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-23perf probe: Avoid calling freeing routine multiple times for same pointerArnaldo Carvalho de Melo
When perf_add_probe_events() we call cleanup_perf_probe_events() for the pev pointer it receives, then, as part of handling this failure the main 'perf probe' goes on and calls cleanup_params() and that will again call cleanup_perf_probe_events()for the same pointer, so just set nevents to zero when handling the failure of perf_add_probe_events() to avoid the double free. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-x8qgma4g813z96dvtw9w219q@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-23perf probe: Set pev->nargs to zero after freeing pev->args entriesArnaldo Carvalho de Melo
So that, when perf_add_probe_events() fails, like in: # perf probe icmp_rcv:64 "type=icmph->type" Failed to find 'icmph' in this function. Error: Failed to add events. Segmentation fault (core dumped) # We don't segfault. clear_perf_probe_event() was zeroing the whole pev, and since the switch to zfree() for the members in the pev, that memset() was removed, which left nargs with its original value, in the above case 1. With the memset the same pev could be passed to clear_perf_probe_event() multiple times, since all it would have would be zeroes, and free() accepts zero, the loop would not happen and we would just memset it again to zeroes. Without it we got that segfault, so zero nargs to keep it like it was, next cset will avoid calling clear_perf_probe_event() for the same pevs in case of failure. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Fixes: d8f9da240495 ("perf tools: Use zfree() where applicable") Link: https://lkml.kernel.org/n/tip-802f2jypnwqsvyavvivs8464@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-23perf session: Fix loading of compressed data split across adjacent recordsAlexey Budankov
Fix decompression failure found during the loading of compressed trace collected on larger scale systems (>48 cores). The error happened due to lack of decompression space for a mmaped buffer data chunk split across adjacent PERF_RECORD_COMPRESSED records. $ perf report -i bt.16384.data --stats failed to decompress (B): 63869 -> 0 : Destination buffer is too small user stack dump failure Can't parse sample, err = -14 0x2637e436 [0x4080]: failed to process type: 9 Error: failed to process sample $ perf test 71 71: Zstd perf.data compression/decompression : Ok Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/4d839e1b-9c48-89c4-9702-a12217420611@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-23perf stat: Always separate stalled cycles per insnCong Wang
The "stalled cycles per insn" is appended to "instructions" when the CPU has this hardware counter directly. We should always make it a separate line, which also aligns to the output when we hit the "if (total && avg)" branch. Before: $ sudo perf stat --all-cpus --field-separator , --log-fd 1 -einstructions,cycles -- sleep 1 4565048704,,instructions,64114578096,100.00,1.34,insn per cycle,, 3396325133,,cycles,64146628546,100.00,, After: $ sudo ./tools/perf/perf stat --all-cpus --field-separator , --log-fd 1 -einstructions,cycles -- sleep 1 6721924,,instructions,24026790339,100.00,0.22,insn per cycle ,,,,,0.00,stalled cycles per insn 30939953,,cycles,24025512526,100.00,, Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Andi Kleen <ak@linux.intel.com> Link: http://lkml.kernel.org/r/20190517221039.8975-1-xiyou.wangcong@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-23perf stat: Fix segfault for event group in repeat modeJiri Olsa
Numfor Mbiziwo-Tiapo reported segfault on stat of event group in repeat mode: # perf stat -e '{cycles,instructions}' -r 10 ls It's caused by memory corruption due to not cleaned evsel's id array and index, which needs to be rebuilt in every stat iteration. Currently the ids index grows, while the array (which is also not freed) has the same size. Fixing this by releasing id array and zeroing ids index in perf_evsel__close function. We also need to keep the evsel_list alive for stat record (which is disabled in repeat mode). Reported-by: Numfor Mbiziwo-Tiapo <nums@google.com> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Mark Drayton <mbd@fb.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <songliubraving@fb.com> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20190715142121.GC6032@krava Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-23perf tools: Fix proper buffer size for feature processingJiri Olsa
After Song Liu's segfault fix for pipe mode, Arnaldo reported following error: # perf record -o - | perf script 0x514 [0x1ac]: failed to process type: 80 It's caused by wrong buffer size setup in feature processing, which makes cpu topology feature fail, because it's using buffer size to recognize its header version. Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: David Carrillo-Cisneros <davidcc@google.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <songliubraving@fb.com> Fixes: e9def1b2e74e ("perf tools: Add feature header record to pipe-mode") Link: http://lkml.kernel.org/r/20190715140426.32509-1-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-23perf script: Fix off by one in brstackinsn IPC computationAndi Kleen
When we hit the end of a program block, need to count the last instruction too for the IPC computation. This caused large errors for small blocks. % perf script -b ls / > /dev/null Before: % perf script -F +brstackinsn --xed ... 00007f94c9ac70d8 jz 0x7f94c9ac70e3 # PRED 3 cycles [36] 4.33 IPC 00007f94c9ac70e3 testb $0x20, 0x31d(%rbx) 00007f94c9ac70ea jnz 0x7f94c9ac70b0 00007f94c9ac70ec testb $0x8, 0x205ad(%rip) 00007f94c9ac70f3 jz 0x7f94c9ac6ff0 # PRED 1 cycles [37] 3.00 IPC After: % perf script -F +brstackinsn --xed ... 00007f94c9ac70d8 jz 0x7f94c9ac70e3 # PRED 3 cycles [15] 4.67 IPC 00007f94c9ac70e3 testb $0x20, 0x31d(%rbx) 00007f94c9ac70ea jnz 0x7f94c9ac70b0 00007f94c9ac70ec testb $0x8, 0x205ad(%rip) 00007f94c9ac70f3 jz 0x7f94c9ac6ff0 # PRED 1 cycles [16] 4.00 IPC Suggested-by: Denis Bakhvalov <denis.bakhvalov@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Link: http://lkml.kernel.org/r/20190711181922.18765-2-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-23perf script: Improve man page description of metricsAndi Kleen
Clarify that a metric is based on events, not referring to itself. Also some improvements with the sentences. Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Link: http://lkml.kernel.org/r/20190711181922.18765-3-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-23perf script: Fix --max-blocks man page descriptionAndi Kleen
The --max-blocks description was using the old name brstackasm. Use brstackinsn instead. Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Link: http://lkml.kernel.org/r/20190711181922.18765-1-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-23drm/i915/selftests: Let igt_vma_partial et al breatheChris Wilson
Give the scheduler a chance to breathe by calling cond_resched() as some of the loops may take some time on slower machines, and so catch the attention of the watchdogs. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111196 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Matthew Auld <matthew.william.auld@gmail.com> Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190723095800.2820-1-chris@chris-wilson.co.uk
2019-07-23drm/i915/uc: Sanitize uC when GT is sanitizedDaniele Ceraolo Spurio
The microcontrollers are part of GT so it makes logical sense to have them sanitized at the same time. This also fixed an issue with our status tracking where the FW load status is not reset around hibernation. Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190723091404.6449-2-chris@chris-wilson.co.uk
2019-07-23drm/i915/uc: Gt-fy uc resetDaniele Ceraolo Spurio
This was the last place in gt/uc that was still using I915_READ with the global dev_priv. Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190723091404.6449-1-chris@chris-wilson.co.uk
2019-07-23ALSA: compress: Be more restrictive about when a drain is allowedCharles Keepax
Draining makes little sense in the situation of hardware overrun, as the hardware will have consumed all its available samples. Additionally, draining whilst the stream is paused would presumably get stuck as no data is being consumed on the DSP side. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Acked-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-07-23ALSA: compress: Don't allow paritial drain operations on capture streamsCharles Keepax
Partial drain and next track are intended for gapless playback and don't really have an obvious interpretation for a capture stream, so makes sense to not allow those operations on capture streams. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Acked-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-07-23ALSA: compress: Prevent bypasses of set_paramsCharles Keepax
Currently, whilst in SNDRV_PCM_STATE_OPEN it is possible to call snd_compr_stop, snd_compr_drain and snd_compr_partial_drain, which allow a transition to SNDRV_PCM_STATE_SETUP. The stream should only be able to move to the setup state once it has received a SNDRV_COMPRESS_SET_PARAMS ioctl. Fix this issue by not allowing those ioctls whilst in the open state. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Acked-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-07-23ALSA: compress: Fix regression on compressed capture streamsCharles Keepax
A previous fix to the stop handling on compressed capture streams causes some knock on issues. The previous fix updated snd_compr_drain_notify to set the state back to PREPARED for capture streams. This causes some issues however as the handling for snd_compr_poll differs between the two states and some user-space applications were relying on the poll failing after the stream had been stopped. To correct this regression whilst still fixing the original problem the patch was addressing, update the capture handling to skip the PREPARED state rather than skipping the SETUP state as it has done until now. Fixes: 4f2ab5e1d13d ("ALSA: compress: Fix stop handling on compressed capture streams") Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Acked-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-07-23drm/i915: Add HDCP capability info to i915_display_info.Anshuman Gupta
To identify the HDCP capability of the display connected to CI systems, we need to add the hdcp capability probing in i915_display_info. This will also help to populate the HDCP capability of the CI systems to CI H/W logs maintained at https://intel-gfx-ci.01.org/hardware/. It will facilitate to determine the kms_content_protection behavior on a particular CI system. v2: Reused the intel_hdcp_info() in i915_hdcp_sink_capability_show(). [Ram] Shifted intel_hdcp_info() to the end of intel_dp_info. [Ram] v3: used seq_puts() instead of seq_pritnf(). [Ram] Cc: daniel.vetter@intel.com Cc: ramalingam.c@intel.com Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com> Reviewed-by: Ramalingam C <ramalingam.c@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190719055513.2089-1-anshuman.gupta@intel.com
2019-07-23s390/kasan: add bitops instrumentationVasily Gorbik
Add KASAN instrumentation of architecture-specific asm implementation of bitops. It also covers s390 specific *_inv functions. Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2019-07-23s390/bitops: make test functions return boolVasily Gorbik
Make s390/bitops test functions return bool values. That enforces return value range to 0 and 1 and matches with asm-generic/bitops-instrumented.h declarations as well as some other architectures implementations. Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2019-07-23s390: wire up clone3 system callVasily Gorbik
Tested (64-bit and compat mode) using program from http://lkml.kernel.org/r/20190604212930.jaaztvkent32b7d3@brauner.io with the following: return syscall(__NR_clone, flags, 0, pidfd, 0, 0); changed to: return syscall(__NR_clone, 0, flags, pidfd, 0, 0); due to CLONE_BACKWARDS2. Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2019-07-23kbuild: enable arch/s390/include/uapi/asm/zcrypt.h for uapi header testHeiko Carstens
Masahiro Yamada changed the zcrypt.h header file to use __u{16,32,64} instead of uint{16,32,64}_t with ("s390: use __u{16,32,64} instead of uint{16,32,64}_t in uapi header"). This makes all s390 header files pass - remove zcrypt.h from the blacklist. Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2019-07-23s390: use __u{16,32,64} instead of uint{16,32,64}_t in uapi headerMasahiro Yamada
When CONFIG_UAPI_HEADER_TEST=y, exported headers are compile-tested to make sure they can be included from user-space. Currently, zcrypt.h is excluded from the test coverage. To make it join the compile-test, we need to fix the build errors attached below. For a case like this, we decided to use __u{8,16,32,64} variable types in this discussion: https://lkml.org/lkml/2019/6/5/18 Build log: CC usr/include/asm/zcrypt.h.s In file included from <command-line>:32:0: ./usr/include/asm/zcrypt.h:163:2: error: unknown type name ‘uint16_t’ uint16_t cprb_len; ^~~~~~~~ ./usr/include/asm/zcrypt.h:168:2: error: unknown type name ‘uint32_t’ uint32_t source_id; ^~~~~~~~ ./usr/include/asm/zcrypt.h:169:2: error: unknown type name ‘uint32_t’ uint32_t target_id; ^~~~~~~~ ./usr/include/asm/zcrypt.h:170:2: error: unknown type name ‘uint32_t’ uint32_t ret_code; ^~~~~~~~ ./usr/include/asm/zcrypt.h:171:2: error: unknown type name ‘uint32_t’ uint32_t reserved1; ^~~~~~~~ ./usr/include/asm/zcrypt.h:172:2: error: unknown type name ‘uint32_t’ uint32_t reserved2; ^~~~~~~~ ./usr/include/asm/zcrypt.h:173:2: error: unknown type name ‘uint32_t’ uint32_t payload_len; ^~~~~~~~ ./usr/include/asm/zcrypt.h:182:2: error: unknown type name ‘uint16_t’ uint16_t ap_id; ^~~~~~~~ ./usr/include/asm/zcrypt.h:183:2: error: unknown type name ‘uint16_t’ uint16_t dom_id; ^~~~~~~~ ./usr/include/asm/zcrypt.h:198:2: error: unknown type name ‘uint16_t’ uint16_t targets_num; ^~~~~~~~ ./usr/include/asm/zcrypt.h:199:2: error: unknown type name ‘uint64_t’ uint64_t targets; ^~~~~~~~ ./usr/include/asm/zcrypt.h:200:2: error: unknown type name ‘uint64_t’ uint64_t weight; ^~~~~~~~ ./usr/include/asm/zcrypt.h:201:2: error: unknown type name ‘uint64_t’ uint64_t req_no; ^~~~~~~~ ./usr/include/asm/zcrypt.h:202:2: error: unknown type name ‘uint64_t’ uint64_t req_len; ^~~~~~~~ ./usr/include/asm/zcrypt.h:203:2: error: unknown type name ‘uint64_t’ uint64_t req; ^~~~~~~~ ./usr/include/asm/zcrypt.h:204:2: error: unknown type name ‘uint64_t’ uint64_t resp_len; ^~~~~~~~ ./usr/include/asm/zcrypt.h:205:2: error: unknown type name ‘uint64_t’ uint64_t resp; ^~~~~~~~ Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2019-07-23s390/hypfs: fix a typo in the name of a functionChristophe JAILLET
Everything is about hypfs_..., except 'hpyfs_vm_create_guest()' s/hpy/hyp/ Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2019-07-23Merge tag 'vfio-ccw-20190717-2' of ↵Heiko Carstens
https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/vfio-ccw into fixes Fixes in vfio-ccw for older and newer issues.
generated by cgit (git 2.34.1) at 2025-09-19 08:18:58 +0000