summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-07-30Btrfs: fix incremental send failure after deduplicationFilipe Manana
When doing an incremental send operation we can fail if we previously did deduplication operations against a file that exists in both snapshots. In that case we will fail the send operation with -EIO and print a message to dmesg/syslog like the following: BTRFS error (device sdc): Send: inconsistent snapshot, found updated \ extent for inode 257 without updated inode item, send root is 258, \ parent root is 257 This requires that we deduplicate to the same file in both snapshots for the same amount of times on each snapshot. The issue happens because a deduplication only updates the iversion of an inode and does not update any other field of the inode, therefore if we deduplicate the file on each snapshot for the same amount of time, the inode will have the same iversion value (stored as the "sequence" field on the inode item) on both snapshots, therefore it will be seen as unchanged between in the send snapshot while there are new/updated/deleted extent items when comparing to the parent snapshot. This makes the send operation return -EIO and print an error message. Example reproducer: $ mkfs.btrfs -f /dev/sdb $ mount /dev/sdb /mnt # Create our first file. The first half of the file has several 64Kb # extents while the second half as a single 512Kb extent. $ xfs_io -f -s -c "pwrite -S 0xb8 -b 64K 0 512K" /mnt/foo $ xfs_io -c "pwrite -S 0xb8 512K 512K" /mnt/foo # Create the base snapshot and the parent send stream from it. $ btrfs subvolume snapshot -r /mnt /mnt/mysnap1 $ btrfs send -f /tmp/1.snap /mnt/mysnap1 # Create our second file, that has exactly the same data as the first # file. $ xfs_io -f -c "pwrite -S 0xb8 0 1M" /mnt/bar # Create the second snapshot, used for the incremental send, before # doing the file deduplication. $ btrfs subvolume snapshot -r /mnt /mnt/mysnap2 # Now before creating the incremental send stream: # # 1) Deduplicate into a subrange of file foo in snapshot mysnap1. This # will drop several extent items and add a new one, also updating # the inode's iversion (sequence field in inode item) by 1, but not # any other field of the inode; # # 2) Deduplicate into a different subrange of file foo in snapshot # mysnap2. This will replace an extent item with a new one, also # updating the inode's iversion by 1 but not any other field of the # inode. # # After these two deduplication operations, the inode items, for file # foo, are identical in both snapshots, but we have different extent # items for this inode in both snapshots. We want to check this doesn't # cause send to fail with an error or produce an incorrect stream. $ xfs_io -r -c "dedupe /mnt/bar 0 0 512K" /mnt/mysnap1/foo $ xfs_io -r -c "dedupe /mnt/bar 512K 512K 512K" /mnt/mysnap2/foo # Create the incremental send stream. $ btrfs send -p /mnt/mysnap1 -f /tmp/2.snap /mnt/mysnap2 ERROR: send ioctl failed with -5: Input/output error This issue started happening back in 2015 when deduplication was updated to not update the inode's ctime and mtime and update only the iversion. Back then we would hit a BUG_ON() in send, but later in 2016 send was updated to return -EIO and print the error message instead of doing the BUG_ON(). A test case for fstests follows soon. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203933 Fixes: 1c919a5e13702c ("btrfs: don't update mtime/ctime on deduped inodes") CC: stable@vger.kernel.org # 4.4+ Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-07-31kbuild: initialize CLANG_FLAGS correctly in the top MakefileMasahiro Yamada
CLANG_FLAGS is initialized by the following line: CLANG_FLAGS := --target=$(notdir $(CROSS_COMPILE:%-=%)) ..., which is run only when CROSS_COMPILE is set. Some build targets (bindeb-pkg etc.) recurse to the top Makefile. When you build the kernel with Clang but without CROSS_COMPILE, the same compiler flags such as -no-integrated-as are accumulated into CLANG_FLAGS. If you run 'make CC=clang' and then 'make CC=clang bindeb-pkg', Kbuild will recompile everything needlessly due to the build command change. Fix this by correctly initializing CLANG_FLAGS. Fixes: 238bcbc4e07f ("kbuild: consolidate Clang compiler flags") Cc: <stable@vger.kernel.org> # v5.0+ Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Acked-by: Nick Desaulniers <ndesaulniers@google.com>
2019-07-30drm/i915/gt: Provide a local intel_context.vmChris Wilson
Track the currently bound address space used by the HW context. Minor conversions to use the local intel_context.vm are made, leaving behind some more surgery required to make intel_context the primary through the selftests. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190730143209.4549-2-chris@chris-wilson.co.uk
2019-07-30drm/i915: Move aliasing_ppgtt underneath its i915_ggttChris Wilson
The aliasing_ppgtt provides a PIN_USER alias for the global gtt, so move it under the i915_ggtt to simplify later transformations to enable intel_context.vm. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190730143209.4549-1-chris@chris-wilson.co.uk
2019-07-31powerpc/spe: Mark expected switch fall-throughsMichael Ellerman
Mark switch cases where we are expecting to fall through. Fixes errors such as below, seen with mpc85xx_defconfig: arch/powerpc/kernel/align.c: In function 'emulate_spe': arch/powerpc/kernel/align.c:178:8: error: this statement may fall through ret |= __get_user_inatomic(temp.v[3], p++); ^~ Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190730141917.21817-1-mpe@ellerman.id.au
2019-07-30drm/bridge: tc358764: Fix build errorYueHaibing
If CONFIG_DRM_TOSHIBA_TC358764=y but CONFIG_DRM_KMS_HELPER=m, building fails: drivers/gpu/drm/bridge/tc358764.o:(.rodata+0x228): undefined reference to `drm_atomic_helper_connector_reset' drivers/gpu/drm/bridge/tc358764.o:(.rodata+0x240): undefined reference to `drm_helper_probe_single_connector_modes' drivers/gpu/drm/bridge/tc358764.o:(.rodata+0x268): undefined reference to `drm_atomic_helper_connector_duplicate_state' drivers/gpu/drm/bridge/tc358764.o:(.rodata+0x270): undefined reference to `drm_atomic_helper_connector_destroy_state' Like TC358767, select DRM_KMS_HELPER to fix this, and change to select DRM_PANEL to avoid recursive dependency. Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: f38b7cca6d0e ("drm/bridge: tc358764: Add DSI to LVDS bridge driver") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190729090520.25968-1-yuehaibing@huawei.com
2019-07-30drm/bridge: lvds-encoder: Fix build error while CONFIG_DRM_KMS_HELPER=mYueHaibing
If DRM_LVDS_ENCODER=y but CONFIG_DRM_KMS_HELPER=m, build fails: drivers/gpu/drm/bridge/lvds-encoder.o: In function `lvds_encoder_probe': lvds-encoder.c:(.text+0x155): undefined reference to `devm_drm_panel_bridge_add' Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: dbb58bfd9ae6 ("drm/bridge: Fix lvds-encoder since the panel_bridge rework.") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190729071216.27488-1-yuehaibing@huawei.com
2019-07-30powerpc/nvdimm: Pick nearby online node if the device node is not onlineAneesh Kumar K.V
Currently, nvdimm subsystem expects the device numa node for SCM device to be an online node. It also doesn't try to bring the device numa node online. Hence if we use a non-online numa node as device node we hit crashes like below. This is because we try to access uninitialized NODE_DATA in different code paths. cpu 0x0: Vector: 300 (Data Access) at [c0000000fac53170] pc: c0000000004bbc50: ___slab_alloc+0x120/0xca0 lr: c0000000004bc834: __slab_alloc+0x64/0xc0 sp: c0000000fac53400 msr: 8000000002009033 dar: 73e8 dsisr: 80000 current = 0xc0000000fabb6d80 paca = 0xc000000003870000 irqmask: 0x03 irq_happened: 0x01 pid = 7, comm = kworker/u16:0 Linux version 5.2.0-06234-g76bd729b2644 (kvaneesh@ltc-boston123) (gcc version 7.4.0 (Ubuntu 7.4.0-1ubuntu1~18.04.1)) #135 SMP Thu Jul 11 05:36:30 CDT 2019 enter ? for help [link register ] c0000000004bc834 __slab_alloc+0x64/0xc0 [c0000000fac53400] c0000000fac53480 (unreliable) [c0000000fac53500] c0000000004bc818 __slab_alloc+0x48/0xc0 [c0000000fac53560] c0000000004c30a0 __kmalloc_node_track_caller+0x3c0/0x6b0 [c0000000fac535d0] c000000000cfafe4 devm_kmalloc+0x74/0xc0 [c0000000fac53600] c000000000d69434 nd_region_activate+0x144/0x560 [c0000000fac536d0] c000000000d6b19c nd_region_probe+0x17c/0x370 [c0000000fac537b0] c000000000d6349c nvdimm_bus_probe+0x10c/0x230 [c0000000fac53840] c000000000cf3cc4 really_probe+0x254/0x4e0 [c0000000fac538d0] c000000000cf429c driver_probe_device+0x16c/0x1e0 [c0000000fac53950] c000000000cf0b44 bus_for_each_drv+0x94/0x130 [c0000000fac539b0] c000000000cf392c __device_attach+0xdc/0x200 [c0000000fac53a50] c000000000cf231c bus_probe_device+0x4c/0xf0 [c0000000fac53a90] c000000000ced268 device_add+0x528/0x810 [c0000000fac53b60] c000000000d62a58 nd_async_device_register+0x28/0xa0 [c0000000fac53bd0] c0000000001ccb8c async_run_entry_fn+0xcc/0x1f0 [c0000000fac53c50] c0000000001bcd9c process_one_work+0x46c/0x860 [c0000000fac53d20] c0000000001bd4f4 worker_thread+0x364/0x5f0 [c0000000fac53db0] c0000000001c7260 kthread+0x1b0/0x1c0 [c0000000fac53e20] c00000000000b954 ret_from_kernel_thread+0x5c/0x68 The patch tries to fix this by picking the nearest online node as the SCM node. This does have a problem of us losing the information that SCM node is equidistant from two other online nodes. If applications need to understand these fine-grained details we should express then like x86 does via /sys/devices/system/node/nodeX/accessY/initiators/ With the patch we get # numactl -H available: 2 nodes (0-1) node 0 cpus: node 0 size: 0 MB node 0 free: 0 MB node 1 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 node 1 size: 130865 MB node 1 free: 129130 MB node distances: node 0 1 0: 10 20 1: 20 10 # cat /sys/bus/nd/devices/region0/numa_node 0 # dmesg | grep papr_scm [ 91.332305] papr_scm ibm,persistent-memory:ibm,pmemory@44104001: Region registered with target node 2 and online node 0 Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190729095128.23707-1-aneesh.kumar@linux.ibm.com
2019-07-30drm/i915: Inline engine->init_context into its callerChris Wilson
We only use the init_context vfunc once while recording the default context state, and we use the same sequence in each backend (eliding steps that do not apply). Remove the vfunc for simplicity and de-duplication. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190729113720.24830-1-chris@chris-wilson.co.uk
2019-07-30ALSA: usb-audio: Fix gpf in snd_usb_pipe_sanity_checkHillf Danton
syzbot found the following crash on: general protection fault: 0000 [#1] SMP KASAN RIP: 0010:snd_usb_pipe_sanity_check+0x80/0x130 sound/usb/helper.c:75 Call Trace: snd_usb_motu_microbookii_communicate.constprop.0+0xa0/0x2fb sound/usb/quirks.c:1007 snd_usb_motu_microbookii_boot_quirk sound/usb/quirks.c:1051 [inline] snd_usb_apply_boot_quirk.cold+0x163/0x370 sound/usb/quirks.c:1280 usb_audio_probe+0x2ec/0x2010 sound/usb/card.c:576 usb_probe_interface+0x305/0x7a0 drivers/usb/core/driver.c:361 really_probe+0x281/0x650 drivers/base/dd.c:548 .... It was introduced in commit 801ebf1043ae for checking pipe and endpoint types. It is fixed by adding a check of the ep pointer in question. BugLink: https://syzkaller.appspot.com/bug?extid=d59c4387bfb6eced94e2 Reported-by: syzbot <syzbot+d59c4387bfb6eced94e2@syzkaller.appspotmail.com> Fixes: 801ebf1043ae ("ALSA: usb-audio: Sanity checks for each pipe and EP types") Cc: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Hillf Danton <hdanton@sina.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-07-30drm/syncobj: fix leaking dma_fence in drm_syncobj_query_ioctlChristian König
We need to check the context number instead if the previous sequence to detect an error and if an error is detected we need to drop the reference to the current fence or otherwise would leak it. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Fixes: 27b575a9aa2f ("drm/syncobj: add timeline payload query ioctl v6") Link: https://patchwork.freedesktop.org/patch/319123/
2019-07-30drm: sti: Mark expected switch fall-throughsGustavo A. R. Silva
Mark switch cases where we are expecting to fall through. This patch fixes the following warning (Building: arm): drivers/gpu/drm/sti/sti_hdmi.c: In function ‘hdmi_audio_configure’: drivers/gpu/drm/sti/sti_hdmi.c:851:13: warning: this statement may fall through [-Wimplicit-fallthrough=] audio_cfg |= HDMI_AUD_CFG_CH78_VALID; drivers/gpu/drm/sti/sti_hdmi.c:852:2: note: here case 6: ^~~~ drivers/gpu/drm/sti/sti_hdmi.c:853:13: warning: this statement may fall through [-Wimplicit-fallthrough=] audio_cfg |= HDMI_AUD_CFG_CH56_VALID; drivers/gpu/drm/sti/sti_hdmi.c:854:2: note: here case 4: ^~~~ drivers/gpu/drm/sti/sti_hdmi.c:855:13: warning: this statement may fall through [-Wimplicit-fallthrough=] audio_cfg |= HDMI_AUD_CFG_CH34_VALID | HDMI_AUD_CFG_8CH; drivers/gpu/drm/sti/sti_hdmi.c:856:2: note: here case 2: ^~~~ Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190729222752.GA20277@embeddedor
2019-07-30drm/i915: use upstream version of header testsJani Nikula
Throw out our local hacks of header tests now that the more generic kbuild versions are upstream. At least for now, continue to keep the header tests behind CONFIG_DRM_I915_WERROR=y knob. Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190729140847.18557-1-jani.nikula@intel.com
2019-07-30Merge tag 'gvt-fixes-2019-07-30' of https://github.com/intel/gvt-linux into ↵Jani Nikula
drm-intel-fixes gvt-fixes-2019-07-30 - Guard against potential ggtt access error (Xiong) - Fix includecheck (Zhenyu) - Fix cache entry for guest page mapping found by 2M ppgtt guest (Xiaolin) - Fix runtime pm warning (Xiaolin) - Fix shadow mm settlement for Windows guest reset failure (Colin) Signed-off-by: Jani Nikula <jani.nikula@intel.com> From: Zhenyu Wang <zhenyuw@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190730070020.GX8319@zhen-hp.sh.intel.com
2019-07-30drm/i915/gvt: Adding ppgtt to GVT GEM context after shadow pdps settled.Colin Xu
Windows guest can't run after force-TDR with host log: ... gvt: vgpu 1: workload shadow ppgtt isn't ready gvt: vgpu 1: fail to dispatch workload, skip ... The error is raised by set_context_ppgtt_from_shadow(), when it checks and found the shadow_mm isn't marked as shadowed. In work thread before each submission, a shadow_mm is set to shadowed in: shadow_ppgtt_mm() <-intel_vgpu_pin_mm() <-prepare_workload() <-dispatch_workload() <-workload_thread() However checking whether or not shadow_mm is shadowed is prior to it: set_context_ppgtt_from_shadow() <-dispatch_workload() <-workload_thread() In normal case, create workload will check the existence of shadow_mm, if not it will create a new one and marked as shadowed. If already exist it will reuse the old one. Since shadow_mm is reused, checking of shadowed in set_context_ppgtt_from_shadow() actually always see the state set in creation, but not the state set in intel_vgpu_pin_mm(). When force-TDR, all engines are reset, since it's not dmlr level, all ppgtt_mm are invalidated but not destroyed. Invalidation will mark all reused shadow_mm as not shadowed but still keeps in ppgtt_mm_list_head. If workload submission phase those shadow_mm are reused with shadowed not set, then set_context_ppgtt_from_shadow() will report error. Pin for context after shadow_mm pinned and shadow pdps settled. v2: Move set_context_ppgtt_from_shadow() after prepare_workload(). (zhenyu) v3: Move set_context_ppgtt_from_shadow() after shadow pdps updated.(zhenyu) Fixes: 4f15665ccbba ("drm/i915: Add ppgtt to GVT GEM context") Cc: stable@vger.kernel.org Signed-off-by: Colin Xu <colin.xu@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2019-07-30drm/i915/gvt: grab runtime pm first for forcewake useXiaolin Zhang
in workload_thread, it should grab runtime pm wakelock and later uncore forcewake get will check rpm wakelock held successfully. otherwise, sometimes, rpm wakelock not hold and print call trace below: Call Trace: intel_uncore_forcewake_get+0x15/0x20 [i915] workload_thread+0x5f9/0x16f0 [i915] ? __switch_to_asm+0x34/0x70 ? __switch_to_asm+0x40/0x70 ? __switch_to_asm+0x34/0x70 ? __switch_to_asm+0x40/0x70 ? __switch_to_asm+0x34/0x70 ? __switch_to+0x85/0x3f0 ? __switch_to_asm+0x40/0x70 ? do_wait_intr_irq+0x90/0x90 kthread+0x121/0x140 ? intel_vgpu_clean_workloads+0x100/0x100 [i915] ? kthread_park+0x90/0x90 ret_from_fork+0x35/0x40 --[ end trace 86525f742a02e12c ]-- v2: adapted to use rpm structure. Fixes: 251d46b0875c ("drm/i915/gvt: Pin the per-engine GVT shadow contexts") Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Xiaolin Zhang <xiaolin.zhang@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2019-07-30drm/i915/gvt: fix incorrect cache entry for guest page mappingXiaolin Zhang
GPU hang observed during the guest OCL conformance test which is caused by THP GTT feature used durning the test. It was observed the same GFN with different size (4K and 2M) requested from the guest in GVT. So during the guest page dma map stage, it is required to unmap first with orginal size and then remap again with requested size. Fixes: b901b252b6cf ("drm/i915/gvt: Add 2M huge gtt support") Cc: stable@vger.kernel.org Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Xiaolin Zhang <xiaolin.zhang@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2019-07-30drm/i915/gvt: Checking workload's gma earlierXiong Zhang
Workload contains RB and WA_CTX which are in ggtt space, if they aren't in valid ggtt space, the workload shouldn't be shadowed and scanned. So checking them earlier to avoid shadow them. Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2019-07-30drm/i915/gvt: Don't use ggtt_validdate_range() with size=0Xiong Zhang
Use vgpu_gmadr_is_valid() directly instead. Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2019-07-30drm/i915/gvt: Warning for invalid ggtt accessXiong Zhang
Instead of silently return virtual ggtt entries that guest is allowed to access, this patch add extra range check. If guest read out of range, it will print a warning and return 0. If guest write out of range, the write will be dropped without any message. Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2019-07-30drm/i915/gvt: remove duplicate include of trace.hZhenyu Wang
This removes duplicate include of trace.h. Found by Hariprasad Kelam with includecheck. Reported-by: Hariprasad Kelam <hariprasad.kelam@gmail.com> Reviewed-by: Yan Zhao <yan.y.zhao@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2019-07-29scsi: fcoe: pass in fcoe_rport structure instead of fc_rport_privHannes Reinecke
Instead of using the generic 'fc_rport_priv' structure as argument and then having to painstakingly outcast this to fcoe_rport we should be passing the fcoe_rport structure itself and reduce complexity. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-07-29scsi: fcoe: Embed fc_rport_priv in fcoe_rport structureHannes Reinecke
Gcc-9 complains for a memset across pointer boundaries, which happens as the code tries to allocate a flexible array on the stack. Turns out we cannot do this without relying on gcc-isms, so with this patch we'll embed the fc_rport_priv structure into fcoe_rport, can use the normal 'container_of' outcast, and will only have to do a memset over one structure. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-07-29scsi: libfc: Whitespace cleanup in libfc.hHannes Reinecke
No functional change. [mkp: typo] Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-07-29libata: zpodd: Fix small read overflow in zpodd_get_mech_type()Kees Cook
Jeffrin reported a KASAN issue: BUG: KASAN: global-out-of-bounds in ata_exec_internal_sg+0x50f/0xc70 Read of size 16 at addr ffffffff91f41f80 by task scsi_eh_1/149 ... The buggy address belongs to the variable: cdb.48319+0x0/0x40 Much like commit 18c9a99bce2a ("libata: zpodd: small read overflow in eject_tray()"), this fixes a cdb[] buffer length, this time in zpodd_get_mech_type(): We read from the cdb[] buffer in ata_exec_internal_sg(). It has to be ATAPI_CDB_LEN (16) bytes long, but this buffer is only 12 bytes. Reported-by: Jeffrin Jose T <jeffrin@rajagiritech.edu.in> Fixes: afe759511808c ("libata: identify and init ZPODD devices") Link: https://lore.kernel.org/lkml/201907181423.E808958@keescook/ Tested-by: Jeffrin Jose T <jeffrin@rajagiritech.edu.in> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-07-29ataflop: Mark expected switch fall-throughGustavo A. R. Silva
Mark switch cases where we are expecting to fall through. This patch fixes the following warning (Building: m68k): drivers/block/ataflop.c: In function ‘fd_locked_ioctl’: drivers/block/ataflop.c:1728:3: warning: this statement may fall through [-Wimplicit-fallthrough=] set_capacity(floppy->disk, MAX_DISK_SIZE * 2); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/block/ataflop.c:1729:2: note: here case FDFMTEND: ^~~~ Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-07-29Merge tag 'perf-urgent-for-mingo-5.3-20190729' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/urgent fixes from Arnaldo Carvalho de Melo: perf header: Vince Weaver: - Fix divide by zero error if f_header.attr_size==0, found using a perf tool fuzzer. Numfor Mbiziwo-Tiapo: - Silence use of uninitialized value warning pointed out by clang's MSAN tool. libbpf: Andrii Nakryiko: - Fix missing __WORDSIZE definition in some systems, such as musl libc (Alpine Linux). tools header UAPI: Arnaldo Carvalho de Melo: - Sync headers to address perf build warnings: - syscalls_64.tbl and generic unistd.h to pick up clone3 and pidfd_open. - With new ioctls: kvm.h, drm.h and usbdevice_fs.h. - No tooling change: mman.h, sched.h and if_link.h. Documentation: Vince Weaver: - Fix perf.data documentation units for memory size, its kB, not bytes. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-29drm/i915/uc: Don't fail on HuC firmware failureMichal Wajdeczko
HuC is usually not a critical component, so we can safely ignore firmware load or authentication failures unless HuC was explicitly requested by the user. v2: add convenient way to disable loading (Chris) Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> #v1 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190729112612.37476-1-michal.wajdeczko@intel.com
2019-07-29Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds
Pull virtio/vhost fixes from Michael Tsirkin: - Fixes in the iommu and balloon devices. - Disable the meta-data optimization for now - I hope we can get it fixed shortly, but there's no point in making users suffer crashes while we are working on that. * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: vhost: disable metadata prefetch optimization iommu/virtio: Update to most recent specification balloon: fix up comments mm/balloon_compaction: avoid duplicate page removal
2019-07-29Merge tag 'platform-drivers-x86-v5.3-3' of ↵Linus Torvalds
git://git.infradead.org/linux-platform-drivers-x86 Pull x86 platform driver fixes from Andy Shevchenko: "Business as usual, a few fixes and new IDs: - PC Engines APU got one fix for software dependencies to automatically load them and another fix for mapping of key button in the front to issue restart event. - OLPC driver is now probed automatically based on module device table. - Intel PMC core driver supports Intel Ice Lake NNPI processor. - WMI driver missed description of a new field in the structure that has been added" * tag 'platform-drivers-x86-v5.3-3' of git://git.infradead.org/linux-platform-drivers-x86: platform/x86: pcengines-apuv2: use KEY_RESTART for front button platform/x86: intel_pmc_core: Add ICL-NNPI support to PMC Core Platform: OLPC: add SPI MODULE_DEVICE_TABLE platform/x86: wmi: add missing struct parameter description platform/x86: pcengines-apuv2: Fix softdep statement
2019-07-29Do not dereference 'siw_crypto_shash' before checkingBernard Metzler
Reported-by: "Dan Carpenter" <dan.carpenter@oracle.com> Fixes: f29dd55b0236 ("rdma/siw: queue pair methods") Link: https://lore.kernel.org/r/OF61E386ED.49A73798-ON00258444.003BD6A6-00258444.003CC8D9@notes.na.collabserv.com Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-07-29ALSA: pcm: fix lost wakeup event scenarios in snd_pcm_drainYuki Tsunashima
lost wakeup can occur after enabling irq, therefore put task into interruptible before enabling interrupts, without this change, task can be put to sleep and snd_pcm_drain will delay Fixes: f2b3614cefb6 ("ALSA: PCM - Don't check DMA time-out too shortly") Signed-off-by: Yuki Tsunashima <ytsunashima@jp.adit-jv.com> Signed-off-by: Suresh Udipi <sudipi@jp.adit-jv.com> [ported from 4.9] Signed-off-by: Adam Miartus <amiartus@de.adit-jv.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-07-29RDMA/qedr: Fix the hca_type and hca_rev returned in device attributesMichal Kalderon
There was a place holder for hca_type and vendor was returned in hca_rev. Fix the hca_rev to return the hw revision and fix the hca_type to return an informative string representing the hca. Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Link: https://lore.kernel.org/r/20190728111338.21930-1-michal.kalderon@marvell.com Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-07-29dax: Fix missed wakeup in put_unlocked_entry()Jan Kara
The condition checking whether put_unlocked_entry() needs to wake up following waiter got broken by commit 23c84eb78375 ("dax: Fix missed wakeup with PMD faults"). We need to wake the waiter whenever the passed entry is valid (i.e., non-NULL and not special conflict entry). This could lead to processes never being woken up when waiting for entry lock. Fix the condition. Cc: <stable@vger.kernel.org> Link: http://lore.kernel.org/r/20190729120228.GC17833@quack2.suse.cz Fixes: 23c84eb78375 ("dax: Fix missed wakeup with PMD faults") Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-07-29RDMA/hns: Fix build errorYueHaibing
If INFINIBAND_HNS_HIP08 is selected and HNS3 is m, but INFINIBAND_HNS is y, building fails: drivers/infiniband/hw/hns/hns_roce_hw_v2.o: In function `hns_roce_hw_v2_exit': hns_roce_hw_v2.c:(.exit.text+0xd): undefined reference to `hnae3_unregister_client' drivers/infiniband/hw/hns/hns_roce_hw_v2.o: In function `hns_roce_hw_v2_init': hns_roce_hw_v2.c:(.init.text+0xd): undefined reference to `hnae3_register_client' Also if INFINIBAND_HNS_HIP06 is selected and HNS_DSAF is m, but INFINIBAND_HNS is y, building fails: drivers/infiniband/hw/hns/hns_roce_hw_v1.o: In function `hns_roce_v1_reset': hns_roce_hw_v1.c:(.text+0x39fa): undefined reference to `hns_dsaf_roce_reset' hns_roce_hw_v1.c:(.text+0x3a25): undefined reference to `hns_dsaf_roce_reset' Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: dd74282df573 ("RDMA/hns: Initialize the PCI device for hip08 RoCE") Fixes: 08805fdbeb2d ("RDMA/hns: Split hw v1 driver from hns roce driver") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20190724065443.53068-1-yuehaibing@huawei.com Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-07-29vfio-ccw: make vfio_ccw_async_region_ops staticVasily Gorbik
Since vfio_ccw_async_region_ops is not exported and has no reason to be globally visible make it static to avoid the following sparse warning: drivers/s390/cio/vfio_ccw_async.c:73:30: warning: symbol 'vfio_ccw_async_region_ops' was not declared. Should it be static? Fixes: d5afd5d135c8 ("vfio-ccw: add handling for async channel instructions") Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-07-29s390/3215: add switch fall through comment for -Wimplicit-fallthroughVasily Gorbik
Silence the following warning when built with -Wimplicit-fallthrough=3 enabled by default since 5.3-rc2: drivers/s390/char/con3215.c: In function 'raw3215_irq': drivers/s390/char/con3215.c:399:6: warning: this statement may fall through [-Wimplicit-fallthrough=] 399 | if (dstat == 0x08) | ^ drivers/s390/char/con3215.c:401:2: note: here 401 | case 0x04: | ^~~~ Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-07-29s390/tape: add fallthrough annotationsHeiko Carstens
Commit a035d552a93b ("Makefile: Globally enable fall-through warning") enables fall-through warnings globally. Add missing annotations. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-07-29s390/mm: add fallthrough annotationsHeiko Carstens
Commit a035d552a93b ("Makefile: Globally enable fall-through warning") enables fall-through warnings globally. Add missing annotations. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-07-29s390/mm: make gmap_test_and_clear_dirty_pmd staticVasily Gorbik
Since gmap_test_and_clear_dirty_pmd is not exported and has no reason to be globally visible make it static to avoid the following sparse warning: arch/s390/mm/gmap.c:2427:6: warning: symbol 'gmap_test_and_clear_dirty_pmd' was not declared. Should it be static? Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-07-29s390/kexec: add missing include to machine_kexec_reloc.cVasily Gorbik
Include <asm/kexec.h> into machine_kexec_reloc.c to expose arch_kexec_do_relocs declaration and avoid the following sparse warnings: arch/s390/kernel/machine_kexec_reloc.c:4:5: warning: symbol 'arch_kexec_do_relocs' was not declared. Should it be static? arch/s390/boot/../kernel/machine_kexec_reloc.c:4:5: warning: symbol 'arch_kexec_do_relocs' was not declared. Should it be static? Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-07-29s390/perf: make cf_diag_csd staticVasily Gorbik
Since there is really no reason for cf_diag_csd per cpu variable to be globally visible make it static to avoid the following sparse warning: arch/s390/kernel/perf_cpum_cf_diag.c:37:1: warning: symbol 'cf_diag_csd' was not declared. Should it be static? Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-07-29s390/lib: add missing includeVasily Gorbik
Include <asm/xor.h> into arch/s390/lib/xor.c to expose xor_block_xc declaration and avoid the following sparse warning: arch/s390/lib/xor.c:128:27: warning: symbol 'xor_block_xc' was not declared. Should it be static? Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-07-29s390/boot: add missing declarations and includesVasily Gorbik
Add __swsusp_reset_dma declaration to avoid the following sparse warnings: arch/s390/kernel/setup.c:107:15: warning: symbol '__swsusp_reset_dma' was not declared. Should it be static? arch/s390/boot/startup.c:52:15: warning: symbol '__swsusp_reset_dma' was not declared. Should it be static? Add verify_facilities declaration to avoid the following sparse warning: arch/s390/boot/als.c:105:6: warning: symbol 'verify_facilities' was not declared. Should it be static? Include "boot.h" into arch/s390/boot/kaslr.c to expose get_random_base function declaration and avoid the following sparse warning: arch/s390/boot/kaslr.c:90:15: warning: symbol 'get_random_base' was not declared. Should it be static? Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-07-29s390: update configsHeiko Carstens
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-07-29s390: clean up qdio.hJulian Wiedmann
Fix two typos, document missing fields in the driver initialization data and remove the copy&pasted 'pfmt' field from the qdr struct. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Jens Remus <jremus@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-07-29Merge drm/drm-next into drm-intel-next-queuedRodrigo Vivi
Catching up with 5.3-rc* Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2019-07-29platform/x86: pcengines-apuv2: use KEY_RESTART for front buttonEnrico Weigelt
The keycode KEY_RESTART is more appropriate for the front button, as most people use it for things like restart or factory reset. Signed-off-by: Enrico Weigelt <info@metux.net> Fixes: f8eb0235f659 ("x86: pcengines apuv2 gpio/leds/keys platform driver") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-07-29pidfd: Add warning if exit_state is 0 during notificationJoel Fernandes (Google)
Previously a condition got missed where the pidfd waiters are awakened before the exit_state gets set. This can result in a missed notification [1] and the polling thread waiting forever. It is fixed now, however it would be nice to avoid this kind of issue going unnoticed in the future. So just add a warning to catch it in the future. /* References */ [1]: https://lore.kernel.org/lkml/20190717172100.261204-1-joel@joelfernandes.org/ Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Link: https://lore.kernel.org/r/20190724164816.201099-1-joel@joelfernandes.org Signed-off-by: Christian Brauner <christian@brauner.io>
2019-07-29pidfd: remove obsolete comments from testChristian Brauner
Since the introduction of CLONE_PIDFD pidfd_send_signal() is independent of CONFIG_PROC_FS. Signed-off-by: Christian Brauner <christian@brauner.io>
generated by cgit (git 2.34.1) at 2025-09-15 23:11:40 +0000