| Age | Commit message (Collapse) | Author |
|---|
|
<hdegoede@redhat.com>:
Hi All,
Here is a series of rt5640/rt5651 volume-control fixes which I wrote
while working on a bytcr-rt5640 UCM profile patch-series adding
hardware-volume control to devices using this UCM profile.
The UCM series will also work on older kernels, but it works best on
kernels with this series applied, giving e.g. finer grained volume
control and support for hardware muting the outputs.
Regards,
Hans
Hans de Goede (5):
ASoC: rt5640: Fix dac- and adc- vol-tlv values being off by a factor
of 10
ASoC: rt5651: Fix dac- and adc- vol-tlv values being off by a factor
of 10
ASoC: rt5640: Add emulated 'DAC1 Playback Switch' control
ASoC: rt5640: Rename 'Mono DAC Playback Volume' to 'DAC2 Playback
Volume'
ASoC: Intel: bytcr_rt5640: Add used AIF to the components string
sound/soc/codecs/rt5640.c | 106 +++++++++++++++++++++++---
sound/soc/codecs/rt5640.h | 4 +
sound/soc/codecs/rt5651.c | 4 +-
sound/soc/intel/boards/bytcr_rt5640.c | 11 ++-
4 files changed, 111 insertions(+), 14 deletions(-)
--
2.30.1
|
|
Most steps in this table are steps of 3dB (300 centi-dB), so we can
simplify the table.
This not only reduces the amount of space it takes inside the kernel,
this also makes alsa-lib's mixer code actually accept the table, where
as before this change alsa-lib saw the "ADC PGA Gain" control as a
control without a dB scale.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210228160441.241110-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
According to the SGTL5000 datasheet [1], the DAP_AVC_CTRL register has
the following bit field definitions:
| BITS | FIELD | RW | RESET | DEFINITION |
| 15 | RSVD | RO | 0x0 | Reserved |
| 14 | RSVD | RW | 0x1 | Reserved |
| 13:12 | MAX_GAIN | RW | 0x1 | Max Gain of AVC in expander mode |
| 11:10 | RSVD | RO | 0x0 | Reserved |
| 9:8 | LBI_RESP | RW | 0x1 | Integrator Response |
| 7:6 | RSVD | RO | 0x0 | Reserved |
| 5 | HARD_LMT_EN | RW | 0x0 | Enable hard limiter mode |
| 4:1 | RSVD | RO | 0x0 | Reserved |
| 0 | EN | RW | 0x0 | Enable/Disable AVC |
The original default value written to the DAP_AVC_CTRL register during
sgtl5000_i2c_probe() was 0x0510. This would incorrectly write values to
bits 4 and 10, which are defined as RESERVED. It would also not set
bits 12 and 14 to their correct RESET values of 0x1, and instead set
them to 0x0. While the DAP_AVC module is effectively disabled because
the EN bit is 0, this default value is still writing invalid values to
registers that are marked as read-only and RESERVED as well as not
setting bits 12 and 14 to their correct default values as defined by the
datasheet.
The correct value that should be written to the DAP_AVC_CTRL register is
0x5100, which configures the register bits to the default values defined
by the datasheet, and prevents any writes to bits defined as
'read-only'. Generally speaking, it is best practice to NOT attempt to
write values to registers/bits defined as RESERVED, as it generally
produces unwanted/undefined behavior, or errors.
Also, all credit for this patch should go to my colleague Dan MacDonald
<dmacdonald@curbellmedical.com> for finding this error in the first
place.
[1] https://www.nxp.com/docs/en/data-sheet/SGTL5000.pdf
Signed-off-by: Benjamin Rood <benjaminjrood@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20210219183308.GA2117@ubuntu-dev
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The adc_vol_tlv volume-control has a range from -17.625 dB to +30 dB,
not -176.25 dB to + 300 dB. This wrong scale is esp. a problem in userspace
apps which translate the dB scale to a linear scale. With the logarithmic
dB scale being of by a factor of 10 we loose all precision in the lower
area of the range when apps translate things to a linear scale.
E.g. the 0 dB default, which corresponds with a value of 47 of the
0 - 127 range for the control, would be shown as 0/100 in alsa-mixer.
Since the centi-dB values used in the TLV struct cannot represent the
0.375 dB step size used by these controls, change the TLV definition
for them to specify a min and max value instead of min + stepsize.
Note this mirrors commit 3f31f7d9b540 ("ASoC: rt5670: Fix dac- and adc-
vol-tlv values being off by a factor of 10") which made the exact same
change to the rt5670 codec driver.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210226143817.84287-3-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The adc_vol_tlv volume-control has a range from -17.625 dB to +30 dB,
not -176.25 dB to + 300 dB. This wrong scale is esp. a problem in userspace
apps which translate the dB scale to a linear scale. With the logarithmic
dB scale being of by a factor of 10 we loose all precision in the lower
area of the range when apps translate things to a linear scale.
E.g. the 0 dB default, which corresponds with a value of 47 of the
0 - 127 range for the control, would be shown as 0/100 in alsa-mixer.
Since the centi-dB values used in the TLV struct cannot represent the
0.375 dB step size used by these controls, change the TLV definition
for them to specify a min and max value instead of min + stepsize.
Note this mirrors commit 3f31f7d9b540 ("ASoC: rt5670: Fix dac- and adc-
vol-tlv values being off by a factor of 10") which made the exact same
change to the rt5670 codec driver.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210226143817.84287-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When I added the quirk for the "HP Pavilion x2 10-p0XX" I copied the
byt_rt5640_quirk_table[] entry for the HP Pavilion x2 10-k0XX / 10-n0XX
models since these use almost the same settings.
While doing this I accidentally also copied and kept the non-standard
OVCD_TH_1500UA setting used on those models. This too low threshold is
causing headsets to often be seen as headphones (without a headset-mic)
and when correctly identified it is causing ghost play/pause
button-presses to get detected.
Correct the HP Pavilion x2 10-p0XX quirk to use the default OVCD_TH_2000UA
setting, fixing these problems.
Fixes: fbdae7d6d04d ("ASoC: Intel: bytcr_rt5640: Fix HP Pavilion x2 Detachable quirks")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210224105052.42116-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
<hdegoede@redhat.com>:
Hi All,
While working on adding hardware-volume control support to the UCM
profile for the rt5672 and on adding LED trigger support to the
rt5670 codec driver. I hit / noticed a couple of issues this series
fixes these issues.
Regards,
Hans
Hans de Goede (4):
ASoC: rt5670: Remove 'OUT Channel Switch' control
ASoC: rt5670: Remove 'HP Playback Switch' control
ASoC: rt5670: Remove ADC vol-ctrl mute bits poking from Sto1 ADC mixer
settings
ASoC: rt5670: Add emulated 'DAC1 Playback Switch' control
sound/soc/codecs/rt5670.c | 110 +++++++++++++++++++++++++++++++++-----
sound/soc/codecs/rt5670.h | 9 ++--
2 files changed, 101 insertions(+), 18 deletions(-)
--
2.30.1
|
|
Add missed MODULE_DEVICE_TABLE for the driver can be loaded
automatically at boot.
Fixes: 920884777480 ("ASoC: ak5558: Add support for AK5558 ADC driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1614149872-25510-2-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add missed MODULE_DEVICE_TABLE for the driver can be loaded
automatically at boot.
Fixes: 08660086eff9 ("ASoC: ak4458: Add support for AK4458 DAC driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1614149872-25510-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
For reliable output-mute LED control we need a "DAC1 Playback Switch"
control. The "DAC Playback volume" control is the only control in the
path from the DAC1 data input to the speaker output, so the UCM profile
for the speaker output will have its PlaybackMixerElem set to "DAC1".
But userspace (pulseaudio) will set the "DAC1 Playback Volume" control to
its softest setting (which is not fully muted) while still showing the
speaker as being enabled at a low volume in the UI.
If we were to set the SNDRV_CTL_ELEM_ACCESS_SPK_LED on the "DAC1 Playback
Volume" control, this would mean then what pressing KEY_VOLUMEDOWN the
speaker-mute LED (embedded in the volume-mute toggle key) would light
while the UI is still showing the speaker as being enabled at a low
volume, meaning that the UI and the LED are out of sync.
Only after an _extra_ KEY_VOLUMEDOWN press would the UI show the
speaker as being muted.
The path from DAC1 data input to the speaker output does have
a digital mixer with DAC1's data as one of its inputs direclty after
the "DAC1 Playback Volume" control.
This commit adds an emulated "DAC1 Playback Switch" control by:
1. Declaring the enable flag for that mixers DAC1 input as well as the
"DAC1 Playback Switch" control both as SND_SOC_NOPM controls.
2. Storing the settings of both controls as driver-private data
3. Only clearing the mute flag for the DAC1 input of that mixer if the
stored values indicate both controls are enabled.
This is a preparation patch for adding "audio-mute" LED trigger support.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210215142118.308516-5-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The SND_SOC_DAPM_MIXER declaration for "Sto1 ADC MIXL" and "Sto1 ADC MIXR"
was using the mute bits from the RT5670_STO1_ADC_DIG_VOL control as mixer
master mute bits.
But these bits are already exposed to userspace as controls as part of the
"ADC Capture Volume" / "ADC Capture Switch" control pair:
SOC_DOUBLE("ADC Capture Switch", RT5670_STO1_ADC_DIG_VOL,
RT5670_L_MUTE_SFT, RT5670_R_MUTE_SFT, 1, 1),
SOC_DOUBLE_TLV("ADC Capture Volume", RT5670_STO1_ADC_DIG_VOL,
RT5670_L_VOL_SFT, RT5670_R_VOL_SFT,
127, 0, adc_vol_tlv),
Both the fact that the mute bits belong to the same reg as the vol-ctrl
and the "Digital Mixer Path" diagram in the datasheet clearly shows that
these mute bits are not part of the mixer and having 2 separate controls
poking at the same bits is a bad idea.
Remove the master-mute bits settings from the "Sto1 ADC MIXL" and
"Sto1 ADC MIXR" DAPM widget declarations, avoiding these bits getting
poked from 2 different places.
This should not cause any issues for userspace. AFAICT the rt567x codecs
are only used on x86/ACPI devices and the UCM profiles used there already
set the "ADC Capture Switch" as needed.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210215142118.308516-4-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The RT5670_L_MUTE_SFT and RT5670_R_MUTE_SFT bits (bits 15 and 7) of the
RT5670_HP_VOL register are set / unset by the headphones deplop code
run by rt5670_hp_event() on SND_SOC_DAPM_POST_PMU / SND_SOC_DAPM_PRE_PMD.
So we should not also export a control to userspace which toggles these
same bits.
This should not cause any issues for userspace. AFAICT the rt567x codecs
are only used on x86/ACPI devices and the UCM profiles used there do not
use the "HP Playback Switch" control.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210215142118.308516-3-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The "OUT Channel Switch" control is a left over from code copied from
thr rt5640 codec driver.
With the rt5640 codec driver the output volume controls have 2 pairs of
mute bits:
bit 7, 15: Mute Control for Spk/Headphone/Line Output Port
bit 6, 14: Mute Control for Spk/Headphone/Line Volume Channel
Bits 7 and 15 are normal mute bits on the rt5670/5672 which are
controlled by 2 dapm widgets:
SND_SOC_DAPM_SWITCH("LOUT L Playback", SND_SOC_NOPM, 0, 0,
&lout_l_enable_control),
SND_SOC_DAPM_SWITCH("LOUT R Playback", SND_SOC_NOPM, 0, 0,
&lout_r_enable_control),
But on the 5670/5672 bit 6 is always reserved, where as bit 14 is
"LOUT Differential Mode" on the 5670 and also reserved on the 5672.
So the "OUT Channel Switch" control which is controlling bits 6+14
of the "LINE Output Control" register is bogus -> remove it.
This should not cause any issues for userspace. AFAICT the rt567x codecs
are only used on x86/ACPI devices and the UCM profiles used there do not
use the "OUT Channel Switch" control.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210215142118.308516-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When using the driver in I2S TDM mode, the _fsl_ssi_set_dai_fmt()
function rewrites the number of slots previously set by the
fsl_ssi_set_dai_tdm_slot() function to 2 by default.
To fix this, let's use the saved slot count value or, if TDM
is not used and the slot count is not set, proceed as before.
Fixes: 4f14f5c11db1 ("ASoC: fsl_ssi: Fix number of words per frame for I2S-slave mode")
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/20210216114221.26635-1-shc_work@mail.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There is potential read of the uninitialized variable ec_tx if the call
to snd_soc_component_read fails or returns an unrecognized w->name. To
avoid this corner case, initialize ec_tx to -1 so that it is caught
later when ec_tx is bounds checked.
Addresses-Coverity: ("Uninitialized scalar variable")
Fixes: 4f692926f562 ("ASoC: codecs: lpass-rx-macro: add dapm widgets and route")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20210215163313.84026-1-colin.king@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Enable BCLK detection after calibration.
Signed-off-by: Jack Yu <jack.yu@realtek.com>
Link: https://lore.kernel.org/r/20210222090057.29532-2-jack.yu@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Remove 0x100 cache re-sync to solve i2c communication error.
Signed-off-by: Jack Yu <jack.yu@realtek.com>
Link: https://lore.kernel.org/r/20210222090057.29532-1-jack.yu@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In case of error, the function dev_get_regmap() returns NULL
pointer not ERR_PTR(). The IS_ERR() test in the return value
check should be replaced with NULL test.
Fixes: 9351ab8b0cb6 ("regulator: rt4831: Adds support for Richtek RT4831 DSV regulator")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20210305034930.3236099-1-weiyongjun1@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The driver uses the DVS registers PCA9450_REG_BUCKxOUT_DVS0 to set the
voltage for the buck regulators 1, 2 and 3. This has no effect as the
PRESET_EN bit is set by default and therefore the preset values are used
instead, which are set to 850 mV.
To fix this we clear the PRESET_EN bit at time of initialization.
Fixes: 0935ff5f1f0a ("regulator: pca9450: add pca9450 pmic driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Link: https://lore.kernel.org/r/20210222115229.166620-1-frieder.schrempf@kontron.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use correct buck, that is, pmic5_hfsmps515 for S1C regulator
of PM8350C PMIC.
Signed-off-by: satya priya <skakit@codeaurora.org>
Link: https://lore.kernel.org/r/1614155592-14060-7-git-send-email-skakit@codeaurora.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Correct the REGULATOR_LINEAR_RANGE and n_voltges for
pmic5_hfsmps515 buck.
Signed-off-by: satya priya <skakit@codeaurora.org>
Link: https://lore.kernel.org/r/1614155592-14060-4-git-send-email-skakit@codeaurora.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This fixes the return value of pca9450_i2c_probe() to use the correct
error code when getting the sd-vsel GPIO fails.
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Link: https://lore.kernel.org/r/20210222150809.208942-1-frieder.schrempf@kontron.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
-EINVAL is not a valid return value for .of_map_mode, return
REGULATOR_MODE_INVALID instead.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20210215034813.45510-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The per_pin->work might be still floating at the suspend, and this may
hit the access to the hardware at an unexpected timing. Cancel the
work properly at the suspend callback for avoiding the buggy access.
Note that the bug doesn't trigger easily in the recent kernels since
the work is queued only when the repoll count is set, and usually it's
only at the resume callback, but it's still possible to hit in
theory.
BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1182377
Reported-and-tested-by: Abhishek Sahu <abhsahu@nvidia.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210310112809.9215-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
When HD-audio bus receives unsolicited events during its system
suspend/resume (S3 and S4) phase, the controller driver may still try
to process events although the codec chips are already (or yet)
powered down. This might screw up the codec communication, resulting
in CORB/RIRB errors. Such events should be rather skipped, as the
codec chip status such as the jack status will be fully refreshed at
the system resume time.
Since we're tracking the system suspend/resume state in codec
power.power_state field, let's add the check in the common unsol event
handler entry point to filter out such events.
BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1182377
Tested-by: Abhishek Sahu <abhsahu@nvidia.com>
Cc: <stable@vger.kernel.org> # 183ab39eb0ea: ALSA: hda: Initialize power_state
Link: https://lore.kernel.org/r/20210310112809.9215-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The HD-audio controller driver processes the unsolicited events via
its work asynchronously, and this might be pending when the system
goes to suspend. When a lengthy event handling like ELD byte reads is
running, this might trigger unexpected accesses among suspend/resume
procedure, typically seen with Nvidia driver that still requires the
handling via unsolicited event verbs for ELD updates.
This patch adds the flush of unsol_work to assure that pending events
are processed before going into suspend.
Buglink: https://bugzilla.suse.com/show_bug.cgi?id=1182377
Reported-and-tested-by: Abhishek Sahu <abhsahu@nvidia.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210310112809.9215-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Commit 0fdf1bb75953 ("arm64: perf: Avoid PMXEV* indirection") changed
armv8pmu_read_evcntr() to return a u32 instead of u64. The result is
silent truncation of the event counter when using 64-bit counters. Given
the offending commit appears to have passed thru several folks, it seems
likely this was a bad rebase after v8.5 PMU 64-bit counters landed.
Cc: Alexandru Elisei <alexandru.elisei@arm.com>
Cc: Julien Thierry <julien.thierry.kdev@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: <stable@vger.kernel.org>
Fixes: 0fdf1bb75953 ("arm64: perf: Avoid PMXEV* indirection")
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com>
Link: https://lore.kernel.org/r/20210310004412.1450128-1-robh@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
As per ARM ARM DDI 0487G.a, when FEAT_LPA2 is implemented, ID_AA64MMFR0_EL1
might contain a range of values to describe supported translation granules
(4K and 16K pages sizes in particular) instead of just enabled or disabled
values. This changes __enable_mmu() function to handle complete acceptable
range of values (depending on whether the field is signed or unsigned) now
represented with ID_AA64MMFR0_TGRAN_SUPPORTED_[MIN..MAX] pair. While here,
also fix similar situations in EFI stub and KVM as well.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: kvmarm@lists.cs.columbia.edu
Cc: linux-efi@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/1615355590-21102-1-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
We track if sve-ptrace encountered a failure in a variable but don't
actually use that value when we exit the program, do so.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210309190304.39169-1-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
In a system supporting MTE, the linear map must allow reading/writing
allocation tags by setting the memory type as Normal Tagged. Currently,
this is only handled for memory present at boot. Hotplugged memory uses
Normal non-Tagged memory.
Introduce pgprot_mhp() for hotplugged memory and use it in
add_memory_resource(). The arm64 code maps pgprot_mhp() to
pgprot_tagged().
Note that ZONE_DEVICE memory should not be mapped as Tagged and
therefore setting the memory type in arch_add_memory() is not feasible.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Fixes: 0178dc761368 ("arm64: mte: Use Normal Tagged attributes for the linear map")
Reported-by: Patrick Daly <pdaly@codeaurora.org>
Tested-by: Patrick Daly <pdaly@codeaurora.org>
Link: https://lore.kernel.org/r/1614745263-27827-1-git-send-email-pdaly@codeaurora.org
Cc: <stable@vger.kernel.org> # 5.10.x
Cc: Will Deacon <will@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20210309122601.5543-1-catalin.marinas@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
seqcount_init() must be a macro in order to preserve the static
variable that is used for the lockdep key. Don't then wrap it in an
inline function, which destroys that.
Luckily there aren't many users of this function, but fix it before it
becomes a problem.
Fixes: 80793c3471d9 ("seqlock: Introduce seqcount_latch_t")
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/YEeFEbNUVkZaXDp4@hirez.programming.kicks-ass.net
|
|
Jakub reported that:
static struct net_device *rtl8139_init_board(struct pci_dev *pdev)
{
...
u64_stats_init(&tp->rx_stats.syncp);
u64_stats_init(&tp->tx_stats.syncp);
...
}
results in lockdep getting confused between the RX and TX stats lock.
This is because u64_stats_init() is an inline calling seqcount_init(),
which is a macro using a static variable to generate a lockdep class.
By wrapping that in an inline, we negate the effect of the macro and
fold the static key variable, hence the confusion.
Fix by also making u64_stats_init() a macro for the case where it
matters, leaving the other case an inline for argument validation
etc.
Reported-by: Jakub Kicinski <kuba@kernel.org>
Debugged-by: "Ahmed S. Darwish" <a.darwish@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: "Erhard F." <erhard_f@mailbox.org>
Link: https://lkml.kernel.org/r/YEXicy6+9MksdLZh@hirez.programming.kicks-ass.net
|
|
This fixes the following sparse warning:
"sparse warnings: (new ones prefixed by >>)"
>> drivers/virt/acrn/irqfd.c:163:13: sparse: sparse: restricted __poll_t
degrades to integer
Fixes: dcf9625f2adf ("virt: acrn: Use vfs_poll() instead of f_op->poll()")
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Shuo Liu <shuo.a.liu@intel.com>
Signed-off-by: Yejune Deng <yejune.deng@gmail.com>
Link: https://lore.kernel.org/r/20210310074901.7486-1-yejune.deng@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
of_get_child_by_name() increments the reference counter of the OF node it
managed to find. So after the code is done using the device node, the
refcount must be decremented. Add missing of_node_put() invocation then
to the dwc3_qcom_of_register_core() method, since DWC3 OF node is being
used only there.
Fixes: a4333c3a6ba9 ("usb: dwc3: Add Qualcomm DWC3 glue driver")
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Link: https://lore.kernel.org/r/20210212205521.14280-1-Sergey.Semin@baikalelectronics.ru
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Apparently an application that opens a device and calls select()
on it, will hang if the decice is disconnected. It's a little
surprising that we had this bug for 15 years, but apparently
nobody ever uses select() with a printer: only write() and read(),
and those work fine. Well, you can also select() with a timeout.
The fix is modeled after devio.c. A few other drivers check the
condition first, then do not add the wait queue in case the
device is disconnected. We doubt that's completely race-free.
So, this patch adds the process first, then locks properly
and checks for the disconnect.
Reviewed-by: Zqiang <qiang.zhang@windriver.com>
Signed-off-by: Pete Zaitcev <zaitcev@redhat.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210303221053.1cf3313e@suzdal.zaitcev.lan
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In case of error, the function devm_platform_ioremap_resource()
returns ERR_PTR() and never returns NULL. The NULL test in the
return value check should be replaced with IS_ERR().
Fixes: 188db4435ac6 ("usb: gadget: s3c: use platform resources")
Cc: stable <stable@vger.kernel.org>
Reported-by: Hulk Robot <hulkci@huawei.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20210305034927.3232386-1-weiyongjun1@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
According to the datasheet, this controller has a restriction
which "set an endpoint number so that combinations of the DIR bit and
the EPNUM bits do not overlap.". However, since the udc core driver is
possible to assign a bulk pipe as an interrupt endpoint, an endpoint
number may not match the pipe number. After that, when user rebinds
another gadget driver, this driver broke the restriction because
the driver didn't clear any configuration in usb_ep_disable().
Example:
# modprobe g_ncm
Then, EP3 = pipe 3, EP4 = pipe 4, EP5 = pipe 6
# rmmod g_ncm
# modprobe g_hid
Then, EP3 = pipe 6, EP4 = pipe 7.
So, pipe 3 and pipe 6 are set as EP3.
So, clear PIPECFG register in usbhs_pipe_free().
Fixes: dfb87b8bfe09 ("usb: renesas_usbhs: gadget: fix re-enabling pipe without re-connecting")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/1615168538-26101-1-git-send-email-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The dwc3-qcom currently enables wakeup interrupts unconditionally
when suspending, however this should not be done when wakeup is
disabled (e.g. through the sysfs attribute power/wakeup). Only
enable wakeup interrupts when device_may_wakeup() returns true.
Fixes: a4333c3a6ba9 ("usb: dwc3: Add Qualcomm DWC3 glue driver")
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210302103659.v2.1.I44954d9e1169f2cf5c44e6454d357c75ddfa99a2@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There is missing playback stop/cleanup in case of
gadget's ->disable callback that happens on
events like USB host resetting or gadget disconnection
Fixes: 0591bc236015 ("usb: gadget: add f_uac1 variant based on a new u_audio api")
Cc: <stable@vger.kernel.org> # 4.13+
Signed-off-by: Ruslan Bilovol <ruslan.bilovol@gmail.com>
Link: https://lore.kernel.org/r/1614599375-8803-3-git-send-email-ruslan.bilovol@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
As per UAC2 Audio Data Formats spec (2.3.1.1 USB Packets),
if the sampling rate is a constant, the allowable variation
of number of audio slots per virtual frame is +/- 1 audio slot.
It means that endpoint should be able to accept/send +1 audio
slot.
Previous endpoint max_packet_size calculation code
was adding sometimes +1 audio slot due to DIV_ROUND_UP
behaviour which was rounding up to closest integer.
However this doesn't work if the numbers are divisible.
It had no any impact with Linux hosts which ignore
this issue, but in case of more strict Windows it
caused rejected enumeration
Thus always add +1 audio slot to endpoint's max packet size
Fixes: 913e4a90b6f9 ("usb: gadget: f_uac2: finalize wMaxPacketSize according to bandwidth")
Cc: Peter Chen <peter.chen@freescale.com>
Cc: <stable@vger.kernel.org> #v4.3+
Signed-off-by: Ruslan Bilovol <ruslan.bilovol@gmail.com>
Link: https://lore.kernel.org/r/1614599375-8803-2-git-send-email-ruslan.bilovol@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If the string is invalid, this should return -EINVAL instead of 0.
Fixes: 73517cf49bd4 ("usb: gadget: add RNDIS configfs options for class/subclass/protocol")
Cc: stable <stable@vger.kernel.org>
Acked-by: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/YCqZ3P53yyIg5cn7@mwanda
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
It enables USB Host support for sc8180x ACPI boot, both the standalone
one and the one behind URS (USB Role Switch). And they share the
the same dwc3_acpi_pdata with sdm845.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Link: https://lore.kernel.org/r/20210301075745.20544-1-shawn.guo@linaro.org
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The CDC ACM driver is false matching the Goodix Fingerprint device
against the USB_CDC_ACM_PROTO_AT_V25TER.
The Goodix Fingerprint device is a biometrics sensor that should be
handled in user-space. libfprint has some support for Goodix
fingerprint sensors, although not for this particular one. It is
possible that the vendor allocates a PID per OEM (Lenovo, Dell etc).
If this happens to be the case then more devices from the same vendor
could potentially match the ACM modem module table.
Signed-off-by: Yorick de Wid <ydewid@gmail.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210213144901.53199-1-ydewid@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit 33d4ae98859873ddd49e22e4ca724387548b3d89.
Pierre-Louis writes:
Our SOF/audio CI shows an across-the-board regression when we try v5.12-rc1,
specifically on pause/resume tests with an interactive terminal running 'aplay
-i' commands managed by expect to simulate the user pressing the space bar to
pause/unpause. It turns out the processes are not longer killed and the audio
devices remain busy (see publicly available test results listed below).
git bisect points to commit 33d4ae9885987 ("drivers:tty:pty: Fix a race
causing data loss on close"). Reverting the patch fixes the issue on all test
devices.
Further analysis with Corey Minyard points to a problem where a slave tty will
not get a SIGHUP when the master is closed.
So revert this for now:
Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/00154592-c5ee-aaba-956e-b265473b53bc@linux.intel.com
Cc: Corey Minyard <cminyard@mvista.com>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: Mark Brown <broonie@kernel.org>,
Fixes: 33d4ae988598 ("drivers:tty:pty: Fix a race causing data loss on close")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit fce3c5c1a2d9cd888f2987662ce17c0c651916b2.
FIFO is triggered 4 intervals after receiving a byte, it's good
when we don't care about the time of reception, but are only
interested in the presence of any activity on the line.
Unfortunately, this method is not suitable for all tasks,
for example, the RS-485 protocol will not work properly,
since the state machine must track the request-response time
and after the timeout expires, a decision is made that the device
on the line is not responding.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Link: https://lore.kernel.org/r/20210217080608.31192-1-shc_work@mail.ru
Fixes: fce3c5c1a2d9 ("serial: max310x: rework RX interrupt handling")
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
led_set_brightness() involves scheduling a workqueue. As here the led's
brightness setting is done in context of the trigger's workqueue this is
unjustified overhead and it's more sensible to use
led_set_brightness_sync().
Fixes: fd4a641ac88f ("leds: trigger: implement a tty trigger")
Reported-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20210219133307.4840-3-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
ttyname is allocated before the mutex is taken, so it must not be
unlocked in the error path.
Fixes: fd4a641ac88f ("leds: trigger: implement a tty trigger")
Reported-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20210219133307.4840-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit 314fd52f01ead9528a5cda5a868425bb736d93a2.
It turns .h files into non-stand-alone when building, which might cause
problems in the long-run.
Reported-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Cc: Muhammad Usama Anjum <musamaanjum@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This code has a check to prevent read overflow but it needs another
check to prevent writing beyond the end of the ->ssid[] array.
Fixes: a2c60d42d97c ("staging: r8188eu: Add files for new driver - part 16")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/YEHymwsnHewzoam7@mwanda
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The "ie_len" is a value in the 1-255 range that comes from the user. We
have to cap it to ensure that it's not too large or it could lead to
memory corruption.
Fixes: 9a7fe54ddc3a ("staging: r8188eu: Add source files for new driver - part 1")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/YEHyQCrFZKTXyT7J@mwanda
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
