summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-01-30USB: qcserial: add Telit Gobi QDL deviceDaniele Palmas
Add VID and PID for Telit Gobi QDL device Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-29net: disallow drivers with buggy VLAN accel to register_netdevice()Michał Mirosław
Instead of jumping aroung bugs that are easily fixed just don't let them in: affected drivers should be either fixed or have NETIF_F_HW_VLAN_FILTER removed from advertised features. Quick grep in drivers/net shows two drivers that have NETIF_F_HW_VLAN_FILTER but not ndo_vlan_rx_add/kill_vid(), but those are false-positives (features are commented out). OTOH two drivers have ndo_vlan_rx_add/kill_vid() implemented but don't advertise NETIF_F_HW_VLAN_FILTER. Those are: +ethernet/cisco/enic/enic_main.c +ethernet/qlogic/qlcnic/qlcnic_main.c Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-29netfilter ipset: Use ipv6_addr_equal() where appropriate.YOSHIFUJI Hideaki / 吉藤英明
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-29netfilter ip6table_mangle: Use ipv6_addr_equal() where appropriate.YOSHIFUJI Hideaki / 吉藤英明
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-29xfrm: Convert xfrm_addr_cmp() to boolean xfrm_addr_equal().YOSHIFUJI Hideaki / 吉藤英明
All users of xfrm_addr_cmp() use its result as boolean. Introduce xfrm_addr_equal() (which is equal to !xfrm_addr_cmp()) and convert all users. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-29xfrm: Use ipv6_addr_equal() where appropriate.YOSHIFUJI Hideaki / 吉藤英明
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-29ipv6 mcast: Use ipv6_addr_equal() in ip6_mc_source().YOSHIFUJI Hideaki / 吉藤英明
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-30ASoC: tlv320aic3x: Remove mono supportBenoît Thébaudeau
Playing a mono stream on the TLV320AIC3x results in too fast playback rate. Remove mono support so that mono streams can be played correctly on this codec. Tested with imx-ssi (i.MX25) and TLV320AIC3104. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-30regulator: clear state each invocation of of_regulator_matchStephen Warren
of_regulator_match() saves some dynamcially allocated state into the match table that's passed to it. By implementation and not contract, for each match table entry, if non-NULL state is already present, of_regulator_match() will not overwrite it. of_regulator_match() is typically called each time a regulator is probe()d. This means it is called with the same match table over and over again if a regulator triggers deferred probe. This results in stale, kfree()d data being left in the match table from probe to probe, which causes a variety of crashes or use of invalid data. Explicitly free all output state from of_regulator_match() before generating new results in order to avoid this. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
2013-01-30Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm fixes from Dave Airlie: "Intel, radeon and exynos fixes. Nothing too major or wierd: one dmar fix and a radeon cursor corruption, along with misc exynos fixes." * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (21 commits) drm/exynos: add check for the device power status drm/exynos: Make 'drm_hdmi_get_edid' static drm/exynos: fimd and ipp are broken on multiplatform drm/exynos: don't include plat/gpio-cfg.h drm/exynos: Remove "internal" interrupt handling drm/exynos: Add missing static specifiers in exynos_drm_rotator.c drm/exynos: Replace mdelay with usleep_range drm/exynos: Make ipp_handle_cmd_work static drm/exynos: Make g2d_userptr_get_dma_addr static drm/exynos: consider DMA_NONE flag to dmabuf import drm/exynos: free sg object if dma_map_sg is failed drm/exynos: added validation of edid for vidi connection drm/exynos: let drm handle edid allocations drm/radeon: Enable DMA_IB_SWAP_ENABLE on big endian hosts. drm/radeon: fix a rare case of double kfree radeon_display: Use pointer return error codes drm/radeon: fix cursor corruption on DCE6 and newer drm/i915: dump UTS_RELEASE into the error_state iommu/intel: disable DMAR for g4x integrated gfx drm/i915: GFX_MODE Flush TLB Invalidate Mode must be '1' for scanline waits ...
2013-01-30Merge tag 'for-linus-v3.8-rc6' of git://oss.sgi.com/xfs/xfsLinus Torvalds
Pull xfs bugfixes from Ben Myers: "Here are fixes for returning EFSCORRUPTED on probe of a non-xfs filesystem, the stack switch in xfs_bmapi_allocate, a crash in _xfs_buf_find, speculative preallocation as the filesystem nears ENOSPC, an unmount hang, a race with AIO, and a regression with xfs_fsr: - fix return value when filesystem probe finds no XFS magic, a regression introduced in 9802182. - fix stack switch in __xfs_bmapi_allocate by moving the check for stack switch up into xfs_bmapi_write. - fix oops in _xfs_buf_find by validating that the requested block is within the filesystem bounds. - limit speculative preallocation near ENOSPC. - fix an unmount hang in xfs_wait_buftarg by freeing the xfs_buf_log_item in xfs_buf_item_unlock. - fix a possible use after free with AIO. - fix xfs_swap_extents after removal of xfs_flushinval_pages, a regression introduced in commit fb59581404a." * tag 'for-linus-v3.8-rc6' of git://oss.sgi.com/xfs/xfs: xfs: Fix xfs_swap_extents() after removal of xfs_flushinval_pages() xfs: Fix possible use-after-free with AIO xfs: fix shutdown hang on invalid inode during create xfs: limit speculative prealloc near ENOSPC thresholds xfs: fix _xfs_buf_find oops on blocks beyond the filesystem end xfs: pull up stack_switch check into xfs_bmapi_write xfs: Do not return EFSCORRUPTED when filesystem probe finds no XFS magic
2013-01-30Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull one s390 fix from Martin Schwidefsky: "Another transparent huge page fix, we need to define a s390 variant for pmdp_set_wrprotect to flush the TLB for the huge page correctly." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/thp: implement pmdp_set_wrprotect()
2013-01-30Merge tag 'pinctrl-fixes-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pinctrl fixes from Linus Walleij: "This is a late pinctrl fix pull request, we had to revert out the pinctrl-single GPIO backend, because of, well, design issues. We're cooking a better thing for the next cycle. - Revert gpio request/free backend, new patch set in the works, will be for v3.9. Get this old cruft out before anyone hurts himself on it. - Kconfig buzz - Various compile warnings - MPP6 value for the Kirkwood" * tag 'pinctrl-fixes-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: nomadik: nmk_prcm_gpiocr_get_mode may be unused pinctrl: exynos: don't mark probing functions as __init Revert "pinctrl: single: support gpio request and free" pinctrl: mvebu: fix MPP6 value for kirkwood driver pinctrl: mvebu: Fix compiler warnings pinctrl: pinctrl-mxs: Fix variables' definition type pinctrl: samsung: removing duplicated condition for PINCTRL_SAMSUNG
2013-01-29timekeeping: Switch HAS_PERSISTENT_CLOCK to ALWAYS_USE_PERSISTENT_CLOCKJohn Stultz
Jason pointed out the HAS_PERSISTENT_CLOCK name isn't quite accurate for the config, as some systems may have the persistent_clock in some cases, but not always. So change the config name to the more clear ALWAYS_USE_PERSISTENT_CLOCK. Signed-off-by: John Stultz <john.stultz@linaro.org>
2013-01-29ARM: sunxi: gpio: Add Allwinner SoCs GPIO driversMaxime Ripard
The IP responsible for the muxing on the Allwinner SoCs are also handling the GPIOs on the system. This patch adds the needed driver that relies on the pinctrl driver for most of its operations. The number of pins available for GPIOs operations are already declared in the pinctrl driver, we only need to probe a generic driver to handle the banks available for each SoC. This driver has been tested on a A13-Olinuxino. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-01-29tracing/fgraph: Adjust fgraph depth before calling trace return callbackSteven Rostedt (Red Hat)
While debugging the virtual cputime with the function graph tracer with a max_depth of 1 (most common use of the max_depth so far), I found that I was missing kernel execution because of a race condition. The code for the return side of the function has a slight race: ftrace_pop_return_trace(&trace, &ret, frame_pointer); trace.rettime = trace_clock_local(); ftrace_graph_return(&trace); barrier(); current->curr_ret_stack--; The ftrace_pop_return_trace() initializes the trace structure for the callback. The ftrace_graph_return() uses the trace structure for its own use as that structure is on the stack and is local to this function. Then the curr_ret_stack is decremented which is what the trace.depth is set to. If an interrupt comes in after the ftrace_graph_return() but before the curr_ret_stack, then the called function will get a depth of 2. If max_depth is set to 1 this function will be ignored. The problem is that the trace has already been called, and the timestamp for that trace will not reflect the time the function was about to re-enter userspace. Calls to the interrupt will not be traced because the max_depth has prevented this. To solve this issue, the ftrace_graph_return() can safely be moved after the current->curr_ret_stack has been updated. This way the timestamp for the return callback will reflect the actual time. If an interrupt comes in after the curr_ret_stack update and ftrace_graph_return(), it will be traced. It may look a little confusing to see it within the other function, but at least it will not be lost. Cc: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-01-29target: Fix zero-length READ_CAPACITY_16 regressionNicholas Bellinger
This patch fixes a regression introduced in v3.8-rc1 code where a zero-length READ_CAPACITY_16 was no longer returning GOOD status, but instead returning TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE to generate a CHECK_CONDITION status. This regression was introduced with the following commit: commit de103c93aff0bed0ae984274e5dc8b95899badab Author: Christoph Hellwig <hch@lst.de> Date: Tue Nov 6 12:24:09 2012 -0800 target: pass sense_reason as a return value and this patch has been tested with the following zero-length CDB: sg_raw /dev/sdd 9e 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCSI Status: Good Sense Information: sense buffer empty Also, convert sbc_emulate_readcapacity() to follow the same method of handling transport_kmap_data_sg() return values, but we never expect a zero-length request here. Cc: Christoph Hellwig <hch@lst.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-01-29target: Fix zero-length MODE_SENSE regressionNicholas Bellinger
This patch fixes a regression introduced in v3.8-rc1 code where a zero-length MODE_SENSE was no longer returning GOOD status, but instead returning TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE to generate a CHECK_CONDITION status. This regression was introduced with the following commit: commit de103c93aff0bed0ae984274e5dc8b95899badab Author: Christoph Hellwig <hch@lst.de> Date: Tue Nov 6 12:24:09 2012 -0800 target: pass sense_reason as a return value and this patch has been tested with the following zero-length CDB: sg_raw /dev/sdd 5a 00 0a 00 00 00 00 00 00 00 SCSI Status: Good Sense Information: sense buffer empty Cc: Christoph Hellwig <hch@lst.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-01-29target: Fix zero-length INQUIRY additional sense code regressionNicholas Bellinger
This patch fixes a minor regression introduced in v3.8-rc1 code where a zero-length INQUIRY was no longer returning the correct INVALID FIELD IN CDB additional sense code. This regression was introduced with the following commit: commit de103c93aff0bed0ae984274e5dc8b95899badab Author: Christoph Hellwig <hch@lst.de> Date: Tue Nov 6 12:24:09 2012 -0800 target: pass sense_reason as a return value and this patch has been tested with the following zero-length CDB: sg_raw /dev/sdd 12 00 83 00 00 00 SCSI Status: Check Condition Sense Information: Fixed format, current; Sense key: Illegal Request Additional sense: Invalid field in cdb Cc: Christoph Hellwig <hch@lst.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-01-29pinctrl: nomadik: nmk_prcm_gpiocr_get_mode may be unusedArnd Bergmann
nmk_prcm_gpiocr_get_mode is only needed for debugfs output at the moment, which can be compile-time disabled. Marking the function __maybe_unused still gives us compile-time coverage, but avoids a gcc warning. Without this patch, building nhk8815_defconfig results in: drivers/pinctrl/pinctrl-nomadik.c:676:12: warning: 'nmk_prcm_gpiocr_get_mode' defined but not used [-Wunused-function] Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Jean-Nicolas Graux <jean-nicolas.graux@stericsson.com> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-01-29pinctrl: exynos: don't mark probing functions as __initArnd Bergmann
Functions called from a driver probe() method must not be marked __init, because they may get called after the init phase is done, when the device shows up late, or because of deferred probing. Without this patch, building exynos_defconfig results in multiple warnings like: WARNING: drivers/pinctrl/built-in.o(.text+0x51bc): Section mismatch in reference from the function exynos5440_pinctrl_probe() to the function .init.text:exynos5440_gpiolib_register() The function exynos5440_pinctrl_probe() references the function __init exynos5440_gpiolib_register(). This is often because exynos5440_pinctrl_probe lacks a __init annotation or the annotation of exynos5440_gpiolib_register is wrong. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Tomasz Figa <t.figa@samsung.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-01-29drm/radeon: add quirk for RV100 boardAlex Deucher
vbios says external TMDS while the board is actually internal TMDS. fixes: https://bugs.freedesktop.org/show_bug.cgi?id=60037 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2013-01-29vmxnet3: set carrier state properly on probeNeil Horman
vmxnet3 fails to set netif_carrier_off on probe, meaning that when an interface is opened the __LINK_STATE_NOCARRIER bit is already cleared, and so /sys/class/net/<ifname>/operstate remains in the unknown state. Correct this by setting netif_carrier_off on probe, like other drivers do. Also, while we're at it, lets remove the netif_carrier_ok checks from the link_state_update function, as that check is atomically contained within the netif_carrier_[on|off] functions anyway Tested successfully by myself Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: "David S. Miller" <davem@davemloft.net> CC: "VMware, Inc." <pv-drivers@vmware.com> CC: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-29e1000e: enable ECC on I217/I218 to catch packet buffer memory errorsBruce Allan
In rare instances, memory errors have been detected in the internal packet buffer memory on I217/I218 when stressed under certain environmental conditions. Enable Error Correcting Code (ECC) in hardware to catch both correctable and uncorrectable errors. Correctable errors will be handled by the hardware. Uncorrectable errors in the packet buffer will cause the packet to be received with an error indication in the buffer descriptor causing the packet to be discarded. If the uncorrectable error is in the descriptor itself, the hardware will stop and interrupt the driver indicating the error. The driver will then reset the hardware in order to clear the error and restart. Both types of errors will be accounted for in statistics counters. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Cc: <stable@vger.kernel.org> # 3.5.x & 3.6.x Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-29Merge tag 'batman-adv-for-davem' of git://git.open-mesh.org/linux-mergeDavid S. Miller
Included changes: - fix recently introduced output behaviour Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-29bonding: unset primary slave via sysfsMilos Vyletel
When bonding module is loaded with primary parameter and one decides to unset primary slave using sysfs these settings are not preserved during bond device restart. Primary slave is only unset once and it's not remembered in bond->params structure. Below is example of recreation. grep OPTS /etc/sysconfig/network-scripts/ifcfg-bond0 BONDING_OPTS="mode=active-backup miimon=100 primary=eth01" grep "Primary Slave" /proc/net/bonding/bond0 Primary Slave: eth01 (primary_reselect always) echo "" > /sys/class/net/bond0/bonding/primary grep "Primary Slave" /proc/net/bonding/bond0 Primary Slave: None sed -i -e 's/primary=eth01//' /etc/sysconfig/network-scripts/ifcfg-bond0 grep OPTS /etc/sysconfig/network-scripts/ifcfg-bond BONDING_OPTS="mode=active-backup miimon=100 " ifdown bond0 && ifup bond0 without patch: grep "Primary Slave" /proc/net/bonding/bond0 Primary Slave: eth01 (primary_reselect always) with patch: grep "Primary Slave" /proc/net/bonding/bond0 Primary Slave: None Reviewed-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Milos Vyletel <milos.vyletel@sde.cz> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-29tcp: Increment LISTENOVERFLOW and LISTENDROPS in tcp_v4_conn_request()Nivedita Singhvi
We drop a connection request if the accept backlog is full and there are sufficient packets in the syn queue to warrant starting drops. Increment the appropriate counters so this isn't silent, for accurate stats and help in debugging. This patch assumes LINUX_MIB_LISTENDROPS is a superset of/includes the counter LINUX_MIB_LISTENOVERFLOWS. Signed-off-by: Nivedita Singhvi <niv@us.ibm.com> Acked-by: Vijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-29ipv6 addrconf: Fix interface identifiers of 802.15.4 devices.YOSHIFUJI Hideaki / 吉藤英明
The "Universal/Local" (U/L) bit must be complmented according to RFC4944 and RFC2464. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-29be2net: Updating Module Author string and log message string to "Emulex ↵Sarveshwar Bandi
Corporation" Signed-off-by: Sarveshwar Bandi <sarveshwar.bandi@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-29tuntap: allow polling/writing/reading when detachedJason Wang
We forbid polling, writing and reading when the file were detached, this may complex the user in several cases: - when guest pass some buffers to vhost/qemu and then disable some queues, host/qemu needs to do its own cleanup on those buffers which is complex sometimes. We can do this simply by allowing a user can still write to an disabled queue. Write to an disabled queue will cause the packet pass to the kernel and read will get nothing. - align the polling behavior with macvtap which never fails when the queue is created. This can simplify the polling errors handling of its user (e.g vhost) We can simply achieve this by don't assign NULL to tfile->tun when detached. Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-29vhost_net: handle polling errors when setting backendJason Wang
Currently, the polling errors were ignored, which can lead following issues: - vhost remove itself unconditionally from waitqueue when stopping the poll, this may crash the kernel since the previous attempt of starting may fail to add itself to the waitqueue - userspace may think the backend were successfully set even when the polling failed. Solve this by: - check poll->wqh before trying to remove from waitqueue - report polling errors in vhost_poll_start(), tx_poll_start(), the return value will be checked and returned when userspace want to set the backend After this fix, there still could be a polling failure after backend is set, it will addressed by the next patch. Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-29vhost_net: correct error handling in vhost_net_set_backend()Jason Wang
Currently, when vhost_init_used() fails the sock refcnt and ubufs were leaked. Correct this by calling vhost_init_used() before assign ubufs and restore the oldsock when it fails. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-29tun: fix carrier on/off statusMichael S. Tsirkin
Commit c8d68e6be1c3b242f1c598595830890b65cea64a removed carrier off call from tun_detach since it's now called on queue disable and not only on tun close. This confuses userspace which used this flag to detect a free tun. To fix, put this back but under if (clean). Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Jason Wang <jasowang@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Tested-by: Toralf Förster <toralf.foerster@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-29pktgen: correctly handle failures when adding a deviceCong Wang
The return value of pktgen_add_device() is not checked, so even if we fail to add some device, for example, non-exist one, we still see "OK:...". This patch fixes it. After this patch, I got: # echo "add_device non-exist" > /proc/net/pktgen/kpktgend_0 -bash: echo: write error: No such device # cat /proc/net/pktgen/kpktgend_0 Running: Stopped: Result: ERROR: can not add device non-exist # echo "add_device eth0" > /proc/net/pktgen/kpktgend_0 # cat /proc/net/pktgen/kpktgend_0 Running: Stopped: eth0 Result: OK: add_device=eth0 (Candidate for -stable) Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-29netem: fix delay calculation in rate extensionJohannes Naab
The delay calculation with the rate extension introduces in v3.3 does not properly work, if other packets are still queued for transmission. For the delay calculation to work, both delay types (latency and delay introduces by rate limitation) have to be handled differently. The latency delay for a packet can overlap with the delay of other packets. The delay introduced by the rate however is separate, and can only start, once all other rate-introduced delays finished. Latency delay is from same distribution for each packet, rate delay depends on the packet size. .: latency delay -: rate delay x: additional delay we have to wait since another packet is currently transmitted .....---- Packet 1 .....xx------ Packet 2 .....------ Packet 3 ^^^^^ latency stacks ^^ rate delay doesn't stack ^^ latency stacks -----> time When a packet is enqueued, we first consider the latency delay. If other packets are already queued, we can reduce the latency delay until the last packet in the queue is send, however the latency delay cannot be <0, since this would mean that the rate is overcommitted. The new reference point is the time at which the last packet will be send. To find the time, when the packet should be send, the rate introduces delay has to be added on top of that. Signed-off-by: Johannes Naab <jn@stusta.de> Acked-by: Hagen Paul Pfeifer <hagen@jauu.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-29l2tp: prevent l2tp_tunnel_delete racing with userspace closeTom Parkin
If a tunnel socket is created by userspace, l2tp hooks the socket destructor in order to clean up resources if userspace closes the socket or crashes. It also caches a pointer to the struct sock for use in the data path and in the netlink interface. While it is safe to use the cached sock pointer in the data path, where the skb references keep the socket alive, it is not safe to use it elsewhere as such access introduces a race with userspace closing the socket. In particular, l2tp_tunnel_delete is prone to oopsing if a multithreaded userspace application closes a socket at the same time as sending a netlink delete command for the tunnel. This patch fixes this oops by forcing l2tp_tunnel_delete to explicitly look up a tunnel socket held by userspace using sockfd_lookup(). Signed-off-by: Tom Parkin <tparkin@katalix.com> Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Bring in the 'net' tree so that we can get some ipv4/ipv6 bug fixes that some net-next work will build upon. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-29ipv6: add anti-spoofing checks for 6to4 and 6rdHannes Frederic Sowa
This patch adds anti-spoofing checks in sit.c as specified in RFC3964 section 5.2 for 6to4 and RFC5969 section 12 for 6rd. I left out the checks which could easily be implemented with netfilter. Specifically this patch adds following logic (based loosely on the pseudocode in RFC3964 section 5.2): if prefix (inner_src_v6) == rd6_prefix (2002::/16 is the default) and outer_src_v4 != embedded_ipv4 (inner_src_v6) drop if prefix (inner_dst_v6) == rd6_prefix (or 2002::/16 is the default) and outer_dst_v4 != embedded_ipv4 (inner_dst_v6) drop accept To accomplish the specified security checks proposed by above RFCs, it is still necessary to employ uRPF filters with netfilter. These new checks only kick in if the employed addresses are within the 2002::/16 or another range specified by the 6rd-prefix (which defaults to 2002::/16). Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Cc: David Miller <davem@davemloft.net> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-29gianfar: Pack struct gfar_priv_grp into three cachelinesClaudiu Manoil
* remove unused members(!): imask, ievent * move space consuming interrupt name strings (int_name_* members) to external structures, unessential for the driver's hot path * keep high priority hot path data within the first 2 cache lines This reduces struct gfar_priv_grp from 6 to 3 cache lines. (Also fixed checkpatch warnings for the old code, in the process.) Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-29gianfar: Cleanup gfar_parse_group() codeClaudiu Manoil
Factor out redundant code (improve readability, source code size). Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-29gianfar: Optimize struct gfar_priv_tx_q for two cache linesClaudiu Manoil
Resize and regroup structure members to eliminate memory holes and to pack the structure into 2 cache lines (from 3). tx_ring_size was resized from 4 to 2 bytes and few members were re-grouped in order to eliminate byte holes and achieve compactness. Where possible, few members were grouped according to their usage and access order (i.e. start_xmit vs. clean_tx_ring members), less important members were pushed at the end. Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-29ipv6: Fix inet6_csk_bind_conflict so it builds with user namespaces enabledEric W. Biederman
When attempting to build linux-next with user namespaces enabled I ran into this fun build error. CC net/ipv6/inet6_connection_sock.o .../net/ipv6/inet6_connection_sock.c: In function ‘inet6_csk_bind_conflict’: .../net/ipv6/inet6_connection_sock.c:37:12: error: incompatible types when initializing type ‘int’ using type ‘kuid_t’ .../net/ipv6/inet6_connection_sock.c:54:30: error: incompatible type for argument 1 of ‘uid_eq’ .../include/linux/uidgid.h:48:20: note: expected ‘kuid_t’ but argument is of type ‘int’ make[3]: *** [net/ipv6/inet6_connection_sock.o] Error 1 make[2]: *** [net/ipv6] Error 2 make[2]: *** Waiting for unfinished jobs.... Using kuid_t instead of int to hold the uid fixes this. Cc: Tom Herbert <therbert@google.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-29pktgen: support net namespaceCong Wang
v3: make pktgen_threads list per-namespace v2: remove a useless check This patch add net namespace to pktgen, so that we can use pktgen in different namespaces. Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-29mac80211: dynamic short slot time for MBSSsThomas Pedersen
The standard mandates mesh STAs to set the ERP Short Slot Time capability info bit in beacons to 0. Even though this is their way of disallowing short slot time for mesh STAs, there should be no harm in enabling it if we determine all STAs in the current MBSS support ERP rates. Increases throughput about 20% for legacy rates when enabled. Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-29net: fec: add napi support to improve proformanceFrank Li
Add napi support Before this patch iperf -s -i 1 ------------------------------------------------------------ Server listening on TCP port 5001 TCP window size: 85.3 KByte (default) ------------------------------------------------------------ [ 4] local 10.192.242.153 port 5001 connected with 10.192.242.138 port 50004 [ ID] Interval Transfer Bandwidth [ 4] 0.0- 1.0 sec 41.2 MBytes 345 Mbits/sec [ 4] 1.0- 2.0 sec 43.7 MBytes 367 Mbits/sec [ 4] 2.0- 3.0 sec 42.8 MBytes 359 Mbits/sec [ 4] 3.0- 4.0 sec 43.7 MBytes 367 Mbits/sec [ 4] 4.0- 5.0 sec 42.7 MBytes 359 Mbits/sec [ 4] 5.0- 6.0 sec 43.8 MBytes 367 Mbits/sec [ 4] 6.0- 7.0 sec 43.0 MBytes 361 Mbits/sec After this patch [ 4] 2.0- 3.0 sec 51.6 MBytes 433 Mbits/sec [ 4] 3.0- 4.0 sec 51.8 MBytes 435 Mbits/sec [ 4] 4.0- 5.0 sec 52.2 MBytes 438 Mbits/sec [ 4] 5.0- 6.0 sec 52.1 MBytes 437 Mbits/sec [ 4] 6.0- 7.0 sec 52.1 MBytes 437 Mbits/sec [ 4] 7.0- 8.0 sec 52.3 MBytes 439 Mbits/sec Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-29ethoc: Cleanup driver formatBarry Grussling
Cleanup the format of ethoc.c to meet network driver style as per checkpatch.pl. Signed-off-by: Barry Grussling <barry@grussling.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-29ip_gre: When TOS is inherited, use configured TOS value for non-IP packetsDavid Ward
A GRE tunnel can be configured so that outgoing tunnel packets inherit the value of the TOS field from the inner IP header. In doing so, when a non-IP packet is transmitted through the tunnel, the TOS field will always be set to 0. Instead, the user should be able to configure a different TOS value as the fallback to use for non-IP packets. This is helpful when the non-IP packets are all control packets and should be handled by routers outside the tunnel as having Internet Control precedence. One example of this is the NHRP packets that control a DMVPN-compatible mGRE tunnel; they are encapsulated directly by GRE and do not contain an inner IP header. Under the existing behavior, the IFLA_GRE_TOS parameter must be set to '1' for the TOS value to be inherited. Now, only the least significant bit of this parameter must be set to '1', and when a non-IP packet is sent through the tunnel, the upper 6 bits of this same parameter will be copied into the TOS field. (The ECN bits get masked off as before.) This behavior is backwards-compatible with existing configurations and iproute2 versions. Signed-off-by: David Ward <david.ward@ll.mit.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-29Merge branch 'for-linville' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/luca/wl12xx Conflicts: drivers/net/wireless/ti/wlcore/main.c
2013-01-29ipv4: introduce address lifetimeJiri Pirko
There are some usecase when lifetime of ipv4 addresses might be helpful. For example: 1) initramfs networkmanager uses a DHCP daemon to learn network configuration parameters 2) initramfs networkmanager addresses, routes and DNS configuration 3) initramfs networkmanager is requested to stop 4) initramfs networkmanager stops all daemons including dhclient 5) there are addresses and routes configured but no daemon running. If the system doesn't start networkmanager for some reason, addresses and routes will be used forever, which violates RFC 2131. This patch is essentially a backport of ivp6 address lifetime mechanism for ipv4 addresses. Current "ip" tool supports this without any patch (since it does not distinguish between ipv4 and ipv6 addresses in this perspective. Also, this should be back-compatible with all current netlink users. Reported-by: Pavel Šimerda <psimerda@redhat.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-29Merge branch 'ipfrags'David S. Miller
Jesper Dangaard Brouer says: ==================== This patchset is V2, with some trivial code fixes, which were noticed by DaveM. It is still a partly respin of my fragmentation optimization patches: http://thread.gmane.org/gmane.linux.network/250914 This is not the complete patchset, from the gmane link above. In this patchset, I primarily focus on adjusting cacheline for better SMP/NUMA performance. Once this patchset have been agreed upon, I will continue and respin the rest of my patches. This time around, I have created a frag DoS generator, via the tool trafgen (http://netsniff-ng.org/). To create a stable DoS scenario (no longer relying on frame dropping due to disabled flow-control). Two 10G interfaces are under-test, and uses Ethernet flow-control. A third interface is used for generating the DoS attack (this interface is also 10G, but it does not need to be, as 500Kpps DoS is enough). Test types summary (netperf): Test-20G64K == 2x10G with 65K fragments Test-20G3F == 2x10G with 3x fragments (3*1472 bytes) Test-20G64K+DoS == Same as 20G64K with frag DoS Test-20G3F+DoS == Same as 20G3F with frag DoS Patch list: Patch-01 - net: cacheline adjust struct netns_frags for better frag performance Patch-02 - net: cacheline adjust struct inet_frags for better frag performance Patch-03 - net: cacheline adjust struct inet_frag_queue Patch-04 - net: frag helper functions for mem limit tracking Patch-05 - net: use lib/percpu_counter API for fragmentation mem accounting Patch-06 - net: frag, move LRU list maintenance outside of rwlock Performance table summary: Test-type: Test-20G64K Test-20G3F 20G64K+DoS 20G3F+DoS ---------- ----------- ---------- ---------- --------- net-next: 15114.5 Mbit/s 8954.21 2444.28 3918.01 Mbit/s Patch-01: 16075.8 Mbit/s 8976.18 2621.49 4072.79 Mbit/s Patch-02: 17806.9 Mbit/s 9280.32 2478.62 4274.59 Mbit/s Patch-03: 17317.4 Mbit/s 9308.62 2546.05 4336.59 Mbit/s Patch-04: 17635.9 Mbit/s 9256.16 2535.25 4327.63 Mbit/s Patch-05: 18027.0 Mbit/s 9918.99 2492.62 3621.68 Mbit/s Patch-06: 18486.7 Mbit/s 10723.20 3657.85 4560.64 Mbit/s I cannot explain the under-DoS regression that patch-05/percpu_counter introduces. But patch-06/LRU-lock corrects the situation again. Below is a testlab setup description, with links to the trafgen DoS packet config used. Testlab ======= Server setup ------------ The machine acting as a server: - 2x CPU (E5-2630) - Thus a NUMA arch/machine - 4x 10Gbit/s ports - NICs 2x Intel Dual port 82599 based (driver ixgbe) Setup: - Interfaces uses Ethernet flow control - Flush all iptables - Remove all iptables related module. - Kill irqbalance - Pin each 10G NIC port to a *single* CPU each Pinning can easily be done by command hacks:: for x in /proc/irq/*/eth8*/../smp_affinity_list ; do echo 1 > $x; done for x in /proc/irq/*/eth9*/../smp_affinity_list ; do echo 3 > $x; done for x in /proc/irq/*/eth31*/../smp_affinity_list; do echo 6 > $x; done for x in /proc/irq/*/eth32*/../smp_affinity_list; do echo 8 > $x; done Notice NUMA setting: The CPU to NIC tying is carefully choosen according to the NUMA node setup. Thus, NICs connected to a PCI-e slot that is connected to a physical CPU socket are tied together. Choosing only a single CPU per NIC (port) is just to ease provoking and debugging this performance issue. (In real setups, you can choose more CPU, just remember the NUMA node in the equation). Tools ----- Netperf is used, with option -T to ensure CPU binding. The netserver processes, are NAPI pinned:: numactl -m0 -c0 netserver numactl -m1 -c 1 netserver -p 1337 I now have a frag DoS generator, created via the tool: trafgen (see: http://netsniff-ng.org/) Trafgen packet config file: http://people.netfilter.org/hawk/frag_work/trafgen/frag_packet03_small_frag.txf Notice, I'm using features of trafgen, recently developed by Daniel Borkmann, thus you need the latest git tree to use my trafgen packet config. git://github.com/borkmann/netsniff-ng.git Command line: trafgen --dev eth51 --conf frag_packet03_small_frag.txf -V -k 100 --cpus 2 Tests types ----------- Test(20G64K) UDP-64K 2x 10Gbit/s with no DoS traffic: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ export SIZE=$((65507)); export TIME=$((20)); export LOG=/tmp/netperf.log ;\ netperf -p 1337 -H 192.168.31.2 -T7,7 -t UDP_STREAM -l $TIME -- -m $SIZE >> ${LOG}.31 &\ netperf -H 192.168.81.2 -T2,2 -t UDP_STREAM -l $TIME -- -m $SIZE >> ${LOG}.81 && \ wait $! && tail -n3 ${LOG}.* && \ tail -n3 ${LOG}.{31,81} | awk 'BEGIN{sum=0;} /212992 / {sum+=$4; print " +"$4} /==/ {print " file:"$2} END{print "sum:"sum" Mbit/s"}' Test(20G3F) UDP-3xfrags 2x 10Gbit/s with no DoS traffic: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ export SIZE=$((3*1472)); export TIME=$((20)); export LOG=/tmp/netperf.log ;\ netperf -p 1337 -H 192.168.31.2 -T7,7 -t UDP_STREAM -l $TIME -- -m $SIZE >> ${LOG}.31 &\ netperf -H 192.168.81.2 -T2,2 -t UDP_STREAM -l $TIME -- -m $SIZE >> ${LOG}.81 && \ wait $! && tail -n3 ${LOG}.* && \ tail -n3 ${LOG}.{31,81} | awk 'BEGIN{sum=0;} /212992 / {sum+=$4; print " +"$4} /==/ {print " file:"$2} END{print "sum:"sum" Mbit/s"}' Awk script for summming results: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ tail -n3 ${LOG}.{31,81} | awk 'BEGIN{sum=0;} /212992 / {sum+=$4; print " +"$4} /==/ {print " file:"$2} END{print "sum:"sum" Mbit/s"}' ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-22 05:06:37 +0000