summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-02-12net: fix infinite loop in __skb_recv_datagram()Eric Dumazet
Tommi was fuzzing with trinity and reported the following problem : commit 3f518bf745 (datagram: Add offset argument to __skb_recv_datagram) missed that a raw socket receive queue can contain skbs with no payload. We can loop in __skb_recv_datagram() with MSG_PEEK mode, because wait_for_packet() is not prepared to skip these skbs. [ 83.541011] INFO: rcu_sched detected stalls on CPUs/tasks: {} (detected by 0, t=26002 jiffies, g=27673, c=27672, q=75) [ 83.541011] INFO: Stall ended before state dump start [ 108.067010] BUG: soft lockup - CPU#0 stuck for 22s! [trinity-child31:2847] ... [ 108.067010] Call Trace: [ 108.067010] [<ffffffff818cc103>] __skb_recv_datagram+0x1a3/0x3b0 [ 108.067010] [<ffffffff818cc33d>] skb_recv_datagram+0x2d/0x30 [ 108.067010] [<ffffffff819ed43d>] rawv6_recvmsg+0xad/0x240 [ 108.067010] [<ffffffff818c4b04>] sock_common_recvmsg+0x34/0x50 [ 108.067010] [<ffffffff818bc8ec>] sock_recvmsg+0xbc/0xf0 [ 108.067010] [<ffffffff818bf31e>] sys_recvfrom+0xde/0x150 [ 108.067010] [<ffffffff81ca4329>] system_call_fastpath+0x16/0x1b Reported-by: Tommi Rantala <tt.rantala@gmail.com> Tested-by: Tommi Rantala <tt.rantala@gmail.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Pavel Emelyanov <xemul@parallels.com> Acked-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-12net: qmi_wwan: add Yota / Megafon M100-1 4g modemBjørn Mork
Interface layout: 00 CD-ROM 01 debug COM port 02 AP control port 03 modem 04 usb-ethernet Bus=01 Lev=02 Prnt=02 Port=01 Cnt=02 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0408 ProdID=ea42 Rev= 0.00 S: Manufacturer=Qualcomm, Incorporated S: Product=Qualcomm CDMA Technologies MSM S: SerialNumber=353568051xxxxxx C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=84(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-12net: sctp: remove unused multiple cookie keysDaniel Borkmann
Vlad says: The whole multiple cookie keys code is completely unused and has been all this time. Noone uses anything other then the secret_key[0] since there is no changeover support anywhere. Thus, for now clean up its left-over fragments. Cc: Neil Horman <nhorman@tuxdriver.com> Cc: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-12efi_pstore: Introducing workqueue updating sysfsSeiji Aguchi
[Problem] efi_pstore creates sysfs entries, which enable users to access to NVRAM, in a write callback. If a kernel panic happens in an interrupt context, it may fail because it could sleep due to dynamic memory allocations during creating sysfs entries. [Patch Description] This patch removes sysfs operations from a write callback by introducing a workqueue updating sysfs entries which is scheduled after the write callback is called. Also, the workqueue is kicked in a just oops case. A system will go down in other cases such as panic, clean shutdown and emergency restart. And we don't need to create sysfs entries because there is no chance for users to access to them. efi_pstore will be robust against a kernel panic in an interrupt context with this patch. Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com> Acked-by: Matt Fleming <matt.fleming@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2013-02-12efivars: Disable external interrupt while holding efivars->lockSeiji Aguchi
[Problem] There is a scenario which efi_pstore fails to log messages in a panic case. - CPUA holds an efi_var->lock in either efivarfs parts or efi_pstore with interrupt enabled. - CPUB panics and sends IPI to CPUA in smp_send_stop(). - CPUA stops with holding the lock. - CPUB kicks efi_pstore_write() via kmsg_dump(KSMG_DUMP_PANIC) but it returns without logging messages. [Patch Description] This patch disables an external interruption while holding efivars->lock as follows. In efi_pstore_write() and get_var_data(), spin_lock/spin_unlock is replaced by spin_lock_irqsave/spin_unlock_irqrestore because they may be called in an interrupt context. In other functions, they are replaced by spin_lock_irq/spin_unlock_irq. because they are all called from a process context. By applying this patch, we can avoid the problem above with a following senario. - CPUA holds an efi_var->lock with interrupt disabled. - CPUB panics and sends IPI to CPUA in smp_send_stop(). - CPUA receives the IPI after releasing the lock because it is disabling interrupt while holding the lock. - CPUB waits for one sec until CPUA releases the lock. - CPUB kicks efi_pstore_write() via kmsg_dump(KSMG_DUMP_PANIC) And it can hold the lock successfully. Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com> Acked-by: Mike Waychison <mikew@google.com> Acked-by: Matt Fleming <matt.fleming@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2013-02-12Merge branch 'timers/for-arm' into timers/coreThomas Gleixner
2013-02-12clockevents: Fix generic broadcast for FEAT_C3STOPMark Rutland
Commit 12ad100046: "clockevents: Add generic timer broadcast function" made tick_device_uses_broadcast set up the generic broadcast function for dummy devices (where !tick_device_is_functional(dev)), but neglected to set up the broadcast function for devices that stop in low power states (with the CLOCK_EVT_FEAT_C3STOP flag). When these devices enter low power states they will not have the generic broadcast function assigned, and will bring down the system when an attempt is made to broadcast to them. This patch ensures that the broadcast function is also assigned for devices which require broadcast in low power states. Reported-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Stephen Warren <swarren@nvidia.com> Cc: linux-arm-kernel@lists.infradead.org Cc: nico@linaro.org Cc: Marc.Zyngier@arm.com Cc: Will.Deacon@arm.com Cc: santosh.shilimkar@ti.com Cc: john.stultz@linaro.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-02-12Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next Conflicts: drivers/net/wireless/iwlwifi/mvm/mac80211.c
2013-02-12Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm fixes from Dave Airlie: "Three nouveau fixes, all user visible issues, and one radeon regression fix" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/radeon: enforce use of radeon_get_ib_value when reading user cmd drm/nouveau: add lockdep annotations drm/nv50/fb: Fix nullptr-deref on IGPs drm/nouveau: use different register to wait for secret scrubber
2013-02-12ALSA: hda - Fix broken workaround for HDMI/SPDIF conflictsTakashi Iwai
The commit [dcda58061: ALSA: hda - Add workaround for conflicting IEC958 controls] introduced a workaround for cards that have both SPDIF and HDMI devices for giving device=1 to SPDIF control elements. It turned out, however, that this workaround doesn't work well - - The workaround checks only conflicts in a single codec, but SPDIF and HDMI are provided by multiple codecs in many cases, and - ALSA mixer abstraction doesn't care about the device number in ctl elements, thus you'll get errors from amixer such as % amixer scontrols -c 0 ALSA lib simple_none.c:1551:(simple_add1) helem (MIXER,'IEC958 Playback Switch',0,1,0) appears twice or more amixer: Mixer hw:0 load error: Invalid argument This patch fixes the previous broken workaround. Instead of changing the device number of SPDIF ctl elements, shift the element indices of such controls up to 16. Also, the conflict check is performed over all codecs found on the bus. HDMI devices will be put to dev=0,index=0 as before. Only the conflicting SPDIF device is moved to a different place. The new place of SPDIF device is supposed by the updated alsa-lib HDA-Intel.conf, respectively. Reported-by: Stephan Raue <stephan@openelec.tv> Reported-by: Anssi Hannula <anssi.hannula@iki.fi> Cc: <stable@vger.kernel.org> [v3.8] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-02-12rtlwifi: Initialize rate_init member of struct rate_control_opsCatalin Iacob
This partially reverts commit 44ba973699b831414c3f8eef68ee5a7fe1208a05. rate_control_rate_init assumes the rate_init member of struct rate_control_ops is not NULL therefore not initializing it leads to an oops as soon the driver succesfully associates to an AP. The removal of rate_update from 44ba973699b831414c3f8eef68ee5a7fe1208a05 is ok because rate_update is checked for NULL before being called. Signed-off-by: Catalin Iacob <iacobcatalin@gmail.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-12Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
2013-02-12iwlwifi: mvm: beautify code in rx_handlersEmmanuel Grumbach
Make the code more readable, and while at it also add a missing "break" to avoid checking handlers that cannot be used. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-12iwlwifi: mvm: update station when marked associatedJohannes Berg
In managed mode, the HT/VHT capabilities aren't set when the station is initially added, so update the station when it is marked associated. In AP/GO mode, the station will typically be added with full capabilities today, but an upcoming change in hostapd may mean a similar scenario as for managed mode, therefore do the update unconditionally. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-12iwlwifi: mvm: don't wait for session protection to startJohannes Berg
Now that mac80211 no longer starts the auth/assoc timeouts when it transmits the frame, but only when the frame status arrives, we no longer need to wait for the session protection time event to start, we can schedule it and enqueue the auth/assoc frame right away. This reduces the amount of time we block mac80211's workqueue. Also, since now we no longer need different behavior for session protection and P2P time events, refactor the code to have just a common implementation. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-12iwlwifi: mvm: don't delay the association until after beaconJohannes Berg
If we haven't heard a beacon before we associate we can still start the association process and set the MAC in the firmware to associated only after having received a beacon with DTIM period by reacting to the new change flag (BSS_CHANGED_DTIM_PERIOD) from mac80211. This reduces the association time in these cases. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-12iwlwifi: dvm: apply beacon changes immediatelyJohannes Berg
If the AP/GO beacon changes, apply such a change immediately, otherwise the AP/GO beacon can be stale for a long time. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-12iwlwifi: mvm: report wakeup reasonsJohannes Berg
Query the wakeup reasons properly and then report them to mac80211. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-12iwlwifi: dvm: query and report WoWLAN wakeup reasonJohannes Berg
Implement proper WoWLAN wakeup and query the wakeup reasons, then report them to userspace. Note that this is tricky: a firmware bug (that has been fixed in later versions) means that the status command response isn't properly closed in hardware and thus won't arrive at the host. Sending another command after it closes the status response but the next command gets stuck, etc. We reset the device after querying though, so this is not a big issue, just makes for strange code. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-12Merge remote-tracking branch 'wireless-next/master' into iwlwifi-nextJohannes Berg
2013-02-12Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2013-02-12iwlwifi: mvm: use atomic interface iteration to avoid deadlockEmmanuel Grumbach
Using the non-atomic version creates a dependency between mac80211's iflist_mtx and mvm->mutex. Use the atomic version instead which doesn't take iflist_mtx but can't sleep, so send the HCMD in ASYNC. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-12ALSA: hda/ca0132 - Add missing \n to debug printsTakashi Iwai
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-02-12ALSA: hda/ca0132 - Fix type of INVALID_CHIP_ADDRESSTakashi Iwai
The chip address is 32bit long but INVALID_CHIP_ADDRESS is defined as an unsigned long. This makes dsp_chip_to_dsp_addx() misbehaving on 64bit architectures. Fix the INVALID_CHIP_ADDRESS definition to be 32bit. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-02-12ALSA: hda - update documentation for no-primary-hp fixupFernando Luis Vázquez Cao
The problem addressed by this fixup is not specific to Vaio Z, affecting some Vaio all-in-one desktop PCs too. Update the code comments accordingly. Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-02-12ALSA: hda - Workaround for silent output on Sony Vaio VGC-LN51JGB with ALC889Fernando Luis Vázquez Cao
Some Vaio all-in-one desktop PCs (for example VGC-LN51JGB) are affected by the same issue that caused Vaio Z laptops to become silent: the speaker pin must be connected to the first DAC even though the codec itself advertises flexible routing through any of the DACs. Use the no-primary-hp fixup for choosing the speaker pin as the primary so that the right DAC is assigned on this device. Cc: stable@vger.kernel.org Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-02-12mac80211: allow driver to be stateless wrt. SMSP requestsEmmanuel Grumbach
Bail out if no update is made to the SMPS state. This allows the driver to avoid duplicating the state. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-12nl80211: minor correction in sample wowlan mask calculationAmitkumar Karwar
The match 00:xx:00:00:xx:00:00:00:00:xx:xx:xx (where xx indicates "don't care") should be represented by a pattern of twelve zero bytes, and a mask of "0xed,0x01", not "0xed,0x07". mask_len = (pat_len + 7) / 8 = (12 + 7) / 8 = 2 Hence the mask will be of 2 bytes. Replace each valid byte in pattern by 1 and don't care byte by 0: 10110111 1000 (0000) 1st byte of pattern corresponds to lower order bit in first byte of mask. And 9th byte of pattern corresponds to lower order bit in second byte of mask. With this logic the mask will be 11101101 00000001 = 0xed 0x01 Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-12drm/radeon: enforce use of radeon_get_ib_value when reading user cmdJerome Glisse
When ever parsing cmd buffer supplied by userspace we need to use radeon_get_ib_value rather than directly accessing the ib as the user cmd might not yet be copied into the ib thus the parser might read value that does not correspond to what user is sending and possibly allowing user to send malicious command undected. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-11x86, uv, uv3: Trim MMR register definitions after code changes for SGI UV3Mike Travis
This patch trims the MMR register definitions after the updates for the SGI UV3 system have been applied. Note that because these definitions are automatically generated from the RTL we cannot control the length of the names. Therefore there are lines that exceed 80 characters. Signed-off-by: Mike Travis <travis@sgi.com> Link: http://lkml.kernel.org/r/20130211194509.173026880@gulag1.americas.sgi.com Acked-by: Russ Anderson <rja@sgi.com> Reviewed-by: Dimitri Sivanich <sivanich@sgi.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-02-11x86, uv, uv3: Check current gru hub support for SGI UV3Mike Travis
This patch checks current hub support to avoid panicing the system until all the GRU changes for UV3+ are in place. Signed-off-by: Mike Travis <travis@sgi.com> Link: http://lkml.kernel.org/r/20130211194509.035828372@gulag1.americas.sgi.com Acked-by: Dimitri Sivanich <sivanich@sgi.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-02-11x86, uv, uv3: Update Time Support for SGI UV3Mike Travis
This patch updates time support for the SGI UV3 hub. Since the UV2 and UV3 time support is identical, "is_uvx_hub" is used instead of having both "is_uv2_hub" and "is_uv3_hub". Signed-off-by: Mike Travis <travis@sgi.com> Link: http://lkml.kernel.org/r/20130211194508.893907185@gulag1.americas.sgi.com Acked-by: Russ Anderson <rja@sgi.com> Reviewed-by: Dimitri Sivanich <sivanich@sgi.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-02-11x86, uv, uv3: Update x2apic Support for SGI UV3Mike Travis
This patch adds support for the SGI UV3 hub to the common x2apic functions. The primary changes are to account for the similarities between UV2 and UV3 which are encompassed within the "UVX" nomenclature. One significant difference within UV3 is the handling of the MMIOH regions which are redirected to the target blade (with the device) in a different manner. It also now has two MMIOH regions for both small and large BARs. This aids in limiting the amount of physical address space removed from real memory that's used for I/O in the max config of 64TB. Signed-off-by: Mike Travis <travis@sgi.com> Link: http://lkml.kernel.org/r/20130211194508.752924185@gulag1.americas.sgi.com Acked-by: Russ Anderson <rja@sgi.com> Reviewed-by: Dimitri Sivanich <sivanich@sgi.com> Cc: Alexander Gordeev <agordeev@redhat.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Steffen Persvold <sp@numascale.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-02-11x86, uv, uv3: Update Hub Info for SGI UV3Mike Travis
This patch updates the UV HUB info for UV3. The "is_uv3_hub" and "is_uvx_hub" (UV2 or UV3) functions are added as well as the addresses and sizes of the MMR regions for UV3. Signed-off-by: Mike Travis <travis@sgi.com> Link: http://lkml.kernel.org/r/20130211194508.610723192@gulag1.americas.sgi.com Acked-by: Russ Anderson <rja@sgi.com> Reviewed-by: Dimitri Sivanich <sivanich@sgi.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-02-11x86, uv, uv3: Update ACPI Check to include SGI UV3Mike Travis
Add UV3 to exclusion list. Instead of adding every new series of SGI UV systems, just check oem_id to have a prefix of "SGI". Signed-off-by: Mike Travis <travis@sgi.com> Link: http://lkml.kernel.org/r/20130211194508.457937455@gulag1.americas.sgi.com Acked-by: Russ Anderson <rja@sgi.com> Reviewed-by: Dimitri Sivanich <sivanich@sgi.com> Cc: Jiang Liu <liuj97@gmail.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-02-11x86, uv, uv3: Update MMR register definitions for SGI Ultraviolet System 3 (UV3)Mike Travis
This patch updates the MMR register definitions for the SGI UV3 system. Note that because these definitions are automatically generated from the RTL we cannot control the length of the names. Therefore there are lines that exceed 80 characters. All the new MMR definitions are added in this patch. The patches that follow then update the references. The last patch is a "trim" patch which reduces the size of the MMR definitions file by about a third. This keeps "bi-sectability" in place as the intermediate patches would not compile correctly if the trimmed MMR defines were done first. Signed-off-by: Mike Travis <travis@sgi.com> Link: http://lkml.kernel.org/r/20130211194508.326204556@gulag1.americas.sgi.com Acked-by: Russ Anderson <rja@sgi.com> Reviewed-by: Dimitri Sivanich <sivanich@sgi.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-02-11netpoll: cleanup sparse warningsNeil Horman
With my recent commit I introduced two sparse warnings. Looking closer there were a few more in the same file, so I fixed them all up. Basic rcu pointer dereferencing suff. I've validated these changes using CONFIG_PROVE_RCU while starting and stopping netconsole repeatedly in bonded and non-bonded configurations Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: fengguang.wu@intel.com CC: David Miller <davem@davemloft.net> CC: eric.dumazet@gmail.com Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-11netpoll: Fix __netpoll_rcu_free so that it can hold the rtnl lockNeil Horman
__netpoll_rcu_free is used to free netpoll structures when the rtnl_lock is already held. The mechanism is used to asynchronously call __netpoll_cleanup outside of the holding of the rtnl_lock, so as to avoid deadlock. Unfortunately, __netpoll_cleanup modifies pointers (dev->np), which means the rtnl_lock must be held while calling it. Further, it cannot be held, because rcu callbacks may be issued in softirq contexts, which cannot sleep. Fix this by converting the rcu callback to a work queue that is guaranteed to get scheduled in process context, so that we can hold the rtnl properly while calling __netpoll_cleanup Tested successfully by myself. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: "David S. Miller" <davem@davemloft.net> CC: Cong Wang <amwang@redhat.com> CC: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-11skbuff: create skb_panic() function and its wrappersJean Sacren
Create skb_panic() function in lieu of both skb_over_panic() and skb_under_panic() so that code duplication would be avoided. Update type and variable name where necessary. Jiri Pirko suggested using wrappers so that we would be able to keep the fruits of the original code. Signed-off-by: Jean Sacren <sakiwit@gmail.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-11NFSv4.1: Fix an ABBA locking issue with session and state serialisationTrond Myklebust
Ensure that if nfs_wait_on_sequence() causes our rpc task to wait for an NFSv4 state serialisation lock, then we also drop the session slot. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: stable@vger.kernel.org
2013-02-11cpuidle: remove vestage definition of cpuidle_state_usage.driver_dataLen Brown
This field is no longer used. Signed-off-by: Len Brown <len.brown@intel.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-02-11mac80211: Add flushes before going off-channelSeth Forshee
We've got a couple of races when enabling powersave with an AP for off-channel operation. The first is fairly simple. If we go off-channel before the nullfunc frame to enable PS is transmitted then it may not be received by the AP. Add a flush after enabling off-channel PS to prevent this from happening. The second race is a bit more subtle. If the driver supports QoS and has frames queued when the nullfunc frame is queued, those frames may get transmitted after the nullfunc frame. If PM is not set then the AP is being told that we've exited PS before we go off-channel and may try to deliver frames. To prevent this, add a flush after stopping the queues but before passing the nullfunc frame to the driver. Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-11mac80211: Fix tx queue handling during scansSeth Forshee
Scans currently work by stopping the netdev tx queues but leaving the mac80211 queues active. This stops the flow of incoming packets while still allowing mac80211 to transmit nullfunc and probe request frames to facilitate scanning. However, the driver may try to wake the mac80211 queues while in this state, which will also wake the netdev queues. To prevent this, add a new queue stop reason, IEEE80211_QUEUE_STOP_REASON_OFFCHANNEL, to be used when stopping the tx queues for off-channel operation. This prevents the netdev queues from waking when a driver wakes the mac80211 queues. This also stops all frames from being transmitted, even those meant to be sent off-channel. Add a new tx control flag, IEEE80211_TX_CTL_OFFCHAN_TX_OK, which allows frames to be transmitted when the queues are stopped only for the off-channel stop reason. Update all locations transmitting off-channel frames to use this flag. Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-11mac80211/minstrel_ht: remove the sampling bypass check for the lowest rateFelix Fietkau
It's more of an unnecessary micro-optimization and it prevents switching from long-GI to short-GI in HT20/single-stream for the lowest rate Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-11mac80211/minstrel_ht: show the number of retries for each rate in debugfsFelix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-11ath6kl: provide 64-bit per-station byte countersVladimir Kondratiev
Internally, 64-bit byte counters maintained for per-station statistics. Tell to the netlink that full 64-bit value provided Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-11wlcore: remove newly introduced alloc/OOM messagesLuciano Coelho
In commit 0d2e7a5c (wireless: Remove unnecessary alloc/OOM messages, alloc cleanups) OOM messages after alloc were removed from the wlcore modules. Commit afb43e6d (wlcore: remove if_ops from platform_data) reintroduced a couple of those. This patch removes them. Signed-off-by: Luciano Coelho <coelho@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-11wireless: rt2x00: rt2800usb add "unknown" devicesXose Vazquez Perez
0x06f8, 0xe036 Hercules Wireless Dual Band 600 USB Key HWNUm-600 0x0b05, 0x17a7 ASUS USB-N10H 150Mbps 11n Wireless USB dongle 0x0df6, 0x0069 Sitecom Wireless Dualband Network Adapter 300N X5 WLA-5000 0x0df6, 0x006f Sitecom WiFi USB adapter N600 WLA-5100 0x13d3, 0x3340 AzureWave 802.11n USB Wireless LAN Card 0x13d3, 0x3399 AzureWave 802.11n USB Wireless LAN Card 0x13d3, 0x3400 AzureWave 802.11n USB Wireless LAN Card 0x13d3, 0x3401 AzureWave 802.11n USB Wireless LAN Card 0x1740, 0x0600 EnGenius Dual-Band Wireless Media Adapter 0x1740, 0x0602 EnGenius 802.11 a/b/g/n Wireless USB Adapter 0x177f, 0x0254 Sweex LW054 Wireless 54G Adapter USB 0xf201, 0x5370 TP-LINK 54Mbps Wireless USB Adapter no RF3053, and I believe no RT5572. Cc: Ivo van Doorn <IvDoorn@gmail.com> Cc: Gertjan van Wingerde <gwingerde@gmail.com> Cc: Helmut Schaa <helmut.schaa@googlemail.com> Cc: John W. Linville <linville@tuxdriver.com> Cc: users@rt2x00.serialmonkey.com Cc: linux-wireless@vger.kernel.org Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-11mwifiex: add PCIe8897 supportAvinash Patil
This patch adds PCIe8897 support to mwifiex. In PCIe8897 PFU (pre-fetch unit) is enabled by default. This patch adds support to accommodate this feaure as well. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Frank Huang <frankh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-11mwifiex: define generic data type for PCIe ring buffersAvinash Patil
This patch defines PCIe ring buffer array pointer as void instead of mwifiex_pcie_buf_desc. This will enable us to use same pointers for ring operations instead of new structures if buffer descriptor structure changes. Also split out event buffer descriptor structure from struct mwifiex_pcie_buf_desc. For PCIe8766 TX/RX buffer descriptor is same as evevt buffer descriptor. Newer chips could use different TX/RX buffer descriptor while event descriptor remains the same. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit (git 2.34.1) at 2025-09-14 22:11:56 +0000