summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-02-08brcmfmac: turn clocks on when reading shared infoPiotr Haber
Make sure backplane clocks are on while reading crash data. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Piotr Haber <phaber@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-08brcmfmac: fix mmc host locking issuePiotr Haber
fix wrong locking in crash info processing Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Piotr Haber <phaber@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-08brcmfmac: Check null pointer on brcmf_dev_reset.Hante Meuleman
When unloading it is possible that drvr is not null, but iflist[0] is. So check iflist[0] pointer before using it. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Piotr Haber <phaber@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-08brcmfmac: use brcmf_if::bssidx as index in interface listHante Meuleman
Upon receiving an IF event from the firmware the interface was created and stored on a list using the interface index. With upcoming P2P feature the firmware will send a IF event in which two interfaces have the same interface index. To uniquely locate them on the list the bss index is now used. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-08mwl8k: Remove unnecessary alloc/OOM messagesJoe Perches
alloc failures already get standardized OOM messages and a dump_stack. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-08brcmsmac: avoid 512 byte stack variableTim Gardner
Dynamically allocate the probe response template which avoids potential stack corruption. Observed with smatch: drivers/net/wireless/brcm80211/brcmsmac/main.c:7412 brcms_c_bss_update_probe_resp() warn: 'prb_resp' puts 512 bytes on stack Cc: Brett Rudley <brudley@broadcom.com> Cc: Arend van Spriel <arend@broadcom.com> Cc: "Franky (Zhenhui) Lin" <frankyl@broadcom.com> Cc: Hante Meuleman <meuleman@broadcom.com> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: Seth Forshee <seth.forshee@canonical.com> Cc: Pieter-Paul Giesberts <pieterpg@broadcom.com> Cc: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-wireless@vger.kernel.org Cc: brcm80211-dev-list@broadcom.com Cc: netdev@vger.kernel.org Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Acked-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-08brcmsmac: fix u16 overflow warningTim Gardner
DOT11_MIN_BEACON_PERIOD and DOT11_MAX_BEACON_PERIOD are superfluous. The only invalid beacon period is 0. Comparing a 16 bit quantity to 0xffff also causes a compile warning: drivers/net/wireless/brcm80211/brcmsmac/main.c:5560 brcms_c_set_beacon_period() warn: impossible condition '(period > 65535) => (0-65535 > 65535)' Observed from smatch analysis. Cc: Brett Rudley <brudley@broadcom.com> Cc: Arend van Spriel <arend@broadcom.com> Cc: "Franky (Zhenhui) Lin" <frankyl@broadcom.com> Cc: Hante Meuleman <meuleman@broadcom.com> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: Pieter-Paul Giesberts <pieterpg@broadcom.com> Cc: Seth Forshee <seth.forshee@canonical.com> Cc: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-wireless@vger.kernel.org Cc: brcm80211-dev-list@broadcom.com Cc: netdev@vger.kernel.org Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Acked-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-08NET: ath5k, check ath5k_eeprom_mode_from_channel retvalJiri Slaby
It can, if invalid argument given, return a negative value. In that case we would access arrays out-of-bounds and such. Check the value and yell loudly if that happened as it would be a bug in the implementation. (Instead of silently corrupting memory.) Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Nick Kossifidis <mickflemm@gmail.com> Cc: "Luis R. Rodriguez" <mcgrof@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-08rtlwifi: rtl8192cu: Fix NULL dereference BUG when using new_idLarry Finger
When the new_id entry in /sysfs is used for a foreign USB device, rtlwifi BUGS with a NULL pointer dereference because the per-driver configuration data is not available. The probe function has been restructured as suggested by Ben Hutchings <bhutchings@solarflare.com>. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-08brcmfmac: fix problem connecting to AP without securityArend van Spriel
The bcm43236 device showed having an issue connection to an AP without security when auth_type was set to automatic. For this particular device a workaround is made by selecting open-system. This problem does not occur when using wpa_supplicant as it will not use auth type automatic. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Piotr Haber <phaber@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-08brcmfmac: add function to retrieve chip informationArend van Spriel
Added function to obtain chip information for chip specific code. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Piotr Haber <phaber@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-08brcmfmac: add chip information to the bus interfaceArend van Spriel
Extend the bus interface with chip identifier and revision. This will be used when certain devices need special handling in the driver. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Piotr Haber <phaber@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-08brcmfmac: Use single function for channel to chanspec.Hante Meuleman
Simplify code by using single function for converting channel to chanspec. No need to set 40MHz flags, as they are not needed for correct working in FW. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Piotr Haber <phaber@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-08brcmfmac: Cleanup function brcmf_notifiy_connect_status_ap.Hante Meuleman
Clean up function, removing some unnecessary code and initialisation. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Piotr Haber <phaber@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-08brcmfmac: Update tracelogging for multiple netdevs.Hante Meuleman
When supporting multiple netdevs it is usefull to log idx in netdev related functions. This will be used for features like P2P. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-08brcmfmac: Track statistics per ifp.Hante Meuleman
Statistics were tracked by bus driver while it is to be tracked per ifp/netdev. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-08brcmfmac: Add logging for FIL int set/get cmds.Hante Meuleman
Reviewed-by: Arend Van Spriel <arend@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-08brcmfmac: Track pending 8021x frames per ifp.Hante Meuleman
Pending 8021x frames were tracked per dongle. This should be done per ifp. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-08brcmfmac: Use struct brcmf_if in brcmf_configure_opensecurity.Hante Meuleman
Reviewed-by: Arend Van Spriel <arend@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-08brcmfmac: Remove copy mac address from drvr at netdev up.Hante Meuleman
At netdev up the mac address from drvr is copied to netdev mac address. This is incorrect and mac address was already set by brcmf_net_attach by copying it from ifp. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-08brcmfmac: Remove drvr_up from bus interface.Hante Meuleman
The tracking of up/down status in bus interface is unnecessary. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-08p54usb: corrected USB ID for T-Com Sinus 154 data IITomasz Guszkowski
Corrected USB ID for T-Com Sinus 154 data II. ISL3887-based. The device was tested in managed mode with no security, WEP 128 bit and WPA-PSK (TKIP) with firmware 2.13.1.0.lm87.arm (md5sum: 7d676323ac60d6e1a3b6d61e8c528248). It works. Signed-off-by: Tomasz Guszkowski <tsg@o2.pl> Cc: <stable@vger.kernel.org> Acked-By: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-08mwl8k: add single band 88W8366 PCI device IDsJonas Gorski
Add PCI deviceIDs for single band versions of 88W8366, found e.g. in simultaneous dual band routers based on kirkwood. Signed-off-by: Jonas Gorski <jogo@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-08net: wireless/rtlwifi: fix uninitialized variable issueCong Ding
The use of variable packet_beacon might be uninitialized in the two files, which is same as this patch: https://patchwork.kernel.org/patch/2006711/ Signed-off-by: Cong Ding <dinggnu@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-08wireless: rt2x00: rt2800usb add Sweex idsXose Vazquez Perez
Info coming from Sweex Windows driver and wikidevi.com 0x177f,0x0163 Sweex LW163 RT3370 1x1, int. antenna 0x177f,0x0164 Sweex LW164 RT8070 1x1, Nano dongle 0x177f,0x0165 Sweex LW165 RT3370 1x1, ext. antenna 0x177f,0x0324 Sweex LW324 RT3072 2x2 with 32Mb NOR flash, autoinstall Cc: Ivo van Doorn <IvDoorn@gmail.com> Cc: Gertjan van Wingerde <gwingerde@gmail.com> Cc: Helmut Schaa <helmut.schaa@googlemail.com> Cc: John W. Linville <linville@tuxdriver.com> Cc: users@rt2x00.serialmonkey.com Cc: linux-wireless@vger.kernel.org Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-08NFC: llcp: integer underflow in nfc_llcp_set_remote_gb()Dan Carpenter
If gb_len is less than 3 it would cause an integer underflow and possibly memory corruption in nfc_llcp_parse_gb_tlv(). I removed the old test for gb_len == 0. I also removed the test for ->remote_gb == NULL. It's not possible for ->remote_gb to be NULL and we have already dereferenced ->remote_gb_len so it's too late to test. The old test return -ENODEV but my test returns -EINVAL. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-08Merge tag 'nfc-next-3.9-2' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/nfc-next Samuel says: "This is the 2nd NFC pull request. With this one we have a new NFC driver for Inside Secure microread and a few pn533 fixes. Microread is an HCI based NFC IP and the driver we're pushing supports tags R/W, and NFC p2p. It's supported over the i2c and MEI busses." Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-08unbreak automounter support on 64-bit kernel with 32-bit userspace (v2)Helge Deller
automount-support is broken on the parisc architecture, because the existing #if list does not include a check for defined(__hppa__). The HPPA (parisc) architecture is similiar to other 64bit Linux targets where we have to define autofs_wqt_t (which is passed back and forth to user space) as int type which has a size of 32bit across 32 and 64bit kernels. During the discussion on the mailing list, H. Peter Anvin suggested to invert the #if list since only specific platforms (specifically those who do not have a 32bit userspace, like IA64 and Alpha) should have autofs_wqt_t as unsigned long type. This suggestion is probably the best way to go, since Arm64 (and maybe others?) seems to have a non-working automounter. So in the long run even for other new upcoming architectures this inverted check seem to be the best solution, since it will not require them to change this #if again (unless they are 64bit only). Signed-off-by: Helge Deller <deller@gmx.de> Acked-by: H. Peter Anvin <hpa@zytor.com> Acked-by: Ian Kent <raven@themaw.net> Acked-by: Catalin Marinas <catalin.marinas@arm.com> CC: James Bottomley <James.Bottomley@HansenPartnership.com> CC: Rolf Eike Beer <eike-kernel@sf-tec.de>
2013-02-08Merge branch 'for-linville' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/luca/wl12xx
2013-02-08Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Fixed-up drivers/net/wireless/iwlwifi/mvm/mac80211.c to change change IEEE80211_HW_NEED_DTIM_PERIOD to IEEE80211_HW_NEED_DTIM_BEFORE_ASSOC as requested by Johannes Berg. -- JWL Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-08atm/iphase: rename fregt_t -> ffreg_tHeiko Carstens
We have conflicting type qualifiers for "freg_t" in s390's ptrace.h and the iphase atm device driver, which causes the compile error below. Unfortunately the s390 typedef can't be renamed, since it's a user visible api, nor can I change the include order in s390 code to avoid the conflict. So simply rename the iphase typedef to a new name. Fixes this compile error: In file included from drivers/atm/iphase.c:66:0: drivers/atm/iphase.h:639:25: error: conflicting type qualifiers for 'freg_t' In file included from next/arch/s390/include/asm/ptrace.h:9:0, from next/arch/s390/include/asm/lowcore.h:12, from next/arch/s390/include/asm/thread_info.h:30, from include/linux/thread_info.h:54, from include/linux/preempt.h:9, from include/linux/spinlock.h:50, from include/linux/seqlock.h:29, from include/linux/time.h:5, from include/linux/stat.h:18, from include/linux/module.h:10, from drivers/atm/iphase.c:43: next/arch/s390/include/uapi/asm/ptrace.h:197:3: note: previous declaration of 'freg_t' was here Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by: chas williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-08tile: tag some code with #ifdef CONFIG_COMPATChris Metcalf
This allows us to disable COMPAT mode without a link error. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-02-08tile: fix memcpy_*io functions for allnoconfigChris Metcalf
On tilepro without CONFIG_PCI, we can't provide inlines of these functions, as we don't have readl/writel. In addition, fix memset_io() signature to take a volatile void *. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-02-08tile: export a handful of symbols appropriatelyChris Metcalf
This was shown up by running with "allmodconfig". I used EXPORT_SYMBOL() to match existing conventions in files that were already exporting symbols, or that were exported that way by other architectures, and otherwise EXPORT_SYMBOL_GPL(). Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-02-08Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
2013-02-08uprobes/perf: Avoid uprobe_apply() whenever possibleOleg Nesterov
uprobe_perf_open/close call the costly uprobe_apply() every time, we can avoid it if: - "nr_systemwide != 0" is not changed. - There is another process/thread with the same ->mm. - copy_proccess() does inherit_event(). dup_mmap() preserves the inserted breakpoints. - event->attr.enable_on_exec == T, we can rely on uprobe_mmap() called by exec/mmap paths. - tp_target is exiting. Only _close() checks PF_EXITING, I don't think TRACE_REG_PERF_OPEN can hit the dying task too often. Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2013-02-08uprobes/perf: Teach trace_uprobe/perf code to use UPROBE_HANDLER_REMOVEOleg Nesterov
Change uprobe_trace_func() and uprobe_perf_func() to return "int". Change uprobe_dispatcher() to return "trace_ret | perf_ret" although this is not needed, currently TP_FLAG_TRACE/TP_FLAG_PROFILE are mutually exclusive. The only functional change is that uprobe_perf_func() checks the filtering too and returns UPROBE_HANDLER_REMOVE if nobody wants to trace current. Testing: # perf probe -x /lib/libc.so.6 syscall # perf record -e probe_libc:syscall -i perl -e 'fork; syscall -1 for 1..10; wait' # perf report --show-total-period 100.00% 10 perl libc-2.8.so [.] syscall Before this patch: # cat /sys/kernel/debug/tracing/uprobe_profile /lib/libc.so.6 syscall 20 A child process doesn't have a counter, but still it hits this breakoint "copied" by dup_mmap(). After the patch: # cat /sys/kernel/debug/tracing/uprobe_profile /lib/libc.so.6 syscall 11 The child process hits this int3 only once and does unapply_uprobe(). Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2013-02-08uprobes/perf: Teach trace_uprobe/perf code to pre-filterOleg Nesterov
Finally implement uprobe_perf_filter() which checks ->nr_systemwide or ->perf_events to figure out whether we need to insert the breakpoint. uprobe_perf_open/close are changed to do uprobe_apply(true/false) when the new perf event comes or goes away. Note that currently this is very suboptimal: - uprobe_register() called by TRACE_REG_PERF_REGISTER becomes a heavy nop, consumer->filter() always returns F at this stage. As it was already discussed we need uprobe_register_only() to avoid the costly register_for_each_vma() when possible. - uprobe_apply() is oftenly overkill. Unless "nr_systemwide != 0" changes we need uprobe_apply_mm(), unapply_uprobe() is almost what we need. - uprobe_apply() can be simply avoided sometimes, see the next changes. Testing: # perf probe -x /lib/libc.so.6 syscall # perl -e 'syscall -1 while 1' & [1] 530 # perf record -e probe_libc:syscall perl -e 'syscall -1 for 1..10; sleep 1' # perf report --show-total-period 100.00% 10 perl libc-2.8.so [.] syscall Before this patch: # cat /sys/kernel/debug/tracing/uprobe_profile /lib/libc.so.6 syscall 79291 A huge ->nrhit == 79291 reflects the fact that the background process 530 constantly hits this breakpoint too, even if doesn't contribute to the output. After the patch: # cat /sys/kernel/debug/tracing/uprobe_profile /lib/libc.so.6 syscall 10 This shows that only the target process was punished by int3. Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2013-02-08uprobes/perf: Teach trace_uprobe/perf code to track the active perf_event'sOleg Nesterov
Introduce "struct trace_uprobe_filter" which records the "active" perf_event's attached to ftrace_event_call. For the start we simply use list_head, we can optimize this later if needed. For example, we do not really need to record an event with ->parent != NULL, we can rely on parent->child_list. And we can certainly do some optimizations for the case when 2 events have the same ->tp_target or tp_target->mm. Change trace_uprobe_register() to process TRACE_REG_PERF_OPEN/CLOSE and add/del this perf_event to the list. We can probably avoid any locking, but lets start with the "obvioulsy correct" trace_uprobe_filter->rwlock which protects everything. Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2013-02-08uprobes: Introduce uprobe_apply()Oleg Nesterov
Currently it is not possible to change the filtering constraints after uprobe_register(), so a consumer can not, say, start to trace a task/mm which was previously filtered out, or remove the no longer needed bp's. Introduce uprobe_apply() which simply does register_for_each_vma() again to consult uprobe_consumer->filter() and install/remove the breakpoints. The only complication is that register_for_each_vma() can no longer assume that uprobe->consumers should be consulter if is_register == T, so we change it to accept "struct uprobe_consumer *new" instead. Unlike uprobe_register(), uprobe_apply(true) doesn't do "unregister" if register_for_each_vma() fails, it is up to caller to handle the error. Note: we probably need to cleanup the current interface, it is strange that uprobe_apply/unregister need inode/offset. We should either change uprobe_register() to return "struct uprobe *", or add a private ->uprobe member in uprobe_consumer. And in the long term uprobe_apply() should take a single argument, uprobe or consumer, even "bool add" should go away. Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2013-02-08perf: Introduce hw_perf_event->tp_target and ->tp_listOleg Nesterov
sys_perf_event_open()->perf_init_event(event) is called before find_get_context(event), this means that event->ctx == NULL when class->reg(TRACE_REG_PERF_REGISTER/OPEN) is called and thus it can't know if this event is per-task or system-wide. This patch adds hw_perf_event->tp_target for PERF_TYPE_TRACEPOINT, this is analogous to PERF_TYPE_BREAKPOINT/bp_target we already have. The patch also moves ->bp_target up so that it can overlap with the new member, this can help the compiler to generate the better code. trace_uprobe_register() will use it for prefiltering to avoid the unnecessary breakpoints in mm's we do not want to trace. ->tp_target doesn't have its own reference, but we can rely on the fact that either sys_perf_event_open() holds a reference, or it is equal to event->ctx->task. So this pointer is always valid until free_event(). Also add the "struct list_head tp_list" into this union. It is not strictly necessary, but it can simplify the next changes and we can add it for free. Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2013-02-08x86, doc: Add a bootloader ID for OVMFH. Peter Anvin
OVMF (an implementation of UEFI based on TianoCore used in virtual environments) now has the ability to boot Linux natively; this is used for "qemu -kernel" and similar things in a UEFI environment. Accordingly, assign it a bootloader ID. Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Cc: David Woodhouse <dwmw2@infradead.org>
2013-02-08uprobes/perf: Always increment trace_uprobe->nhitOleg Nesterov
Move tu->nhit++ from uprobe_trace_func() to uprobe_dispatcher(). ->nhit counts how many time we hit the breakpoint inserted by this uprobe, we do not want to loose this info if uprobe was enabled by sys_perf_event_open(). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2013-02-08uprobes/tracing: Kill uprobe_trace_consumer, embed uprobe_consumer into ↵Oleg Nesterov
trace_uprobe trace_uprobe->consumer and "struct uprobe_trace_consumer" add the unnecessary indirection and complicate the code for no reason. This patch simply embeds uprobe_consumer into "struct trace_uprobe", all other changes only fix the compilation errors. Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2013-02-08uprobes/tracing: Introduce is_trace_uprobe_enabled()Oleg Nesterov
probe_event_enable/disable() check tu->consumer != NULL to avoid the wrong uprobe_register/unregister(). We are going to kill this pointer and "struct uprobe_trace_consumer", so we add the new helper, is_trace_uprobe_enabled(), which can rely on TP_FLAG_TRACE/TP_FLAG_PROFILE instead. Note: the current logic doesn't look optimal, it is not clear why TP_FLAG_TRACE/TP_FLAG_PROFILE are mutually exclusive, we will probably change this later. Also kill the unused TP_FLAG_UPROBE. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2013-02-08uprobes/tracing: Ensure inode != NULL in create_trace_uprobe()Oleg Nesterov
probe_event_enable/disable() check tu->inode != NULL at the start. This is ugly, if igrab() can fail create_trace_uprobe() should not succeed and "postpone" the failure. And S_ISREG(inode->i_mode) check added by d24d7dbf is not safe. Note: alloc_uprobe() should probably check igrab() != NULL as well. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2013-02-08uprobes/tracing: Fully initialize uprobe_trace_consumer before uprobe_register()Oleg Nesterov
probe_event_enable() does uprobe_register() and only after that sets utc->tu and tu->consumer/flags. This can race with uprobe_dispatcher() which can miss these assignments or see them out of order. Nothing really bad can happen, but this doesn't look clean/safe. And this does not allow to use uprobe_consumer->filter() we are going to add, it is called by uprobe_register() and it needs utc->tu. Change this code to initialize everything before uprobe_register(), and reset tu->consumer/flags if it fails. We can't race with event_disable(), the caller holds event_mutex, and if we could the code would be wrong anyway. In fact I think uprobe_trace_consumer should die, it buys nothing but complicates the code. We can simply add uprobe_consumer into trace_uprobe. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2013-02-08uprobes/tracing: Fix dentry/mount leak in create_trace_uprobe()Oleg Nesterov
create_trace_uprobe() does kern_path() to find ->d_inode, but forgets to do path_put(). We can do this right after igrab(). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2013-02-08uprobes: Add exports for module useJosh Stone
The original pull message for uprobes (commit 654443e2) noted: This tree includes uprobes support in 'perf probe' - but SystemTap (and other tools) can take advantage of user probe points as well. In order to actually be usable in module-based tools like SystemTap, the interface needs to be exported. This patch first adds the obvious exports for uprobe_register and uprobe_unregister. Then it also adds one for task_user_regset_view, which is necessary to get the correct state of userspace registers. Signed-off-by: Josh Stone <jistone@redhat.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2013-02-08uprobes: Kill the bogus IS_ERR_VALUE(xol_vaddr) checkOleg Nesterov
utask->xol_vaddr is either zero or valid, remove the bogus IS_ERR_VALUE() check in xol_free_insn_slot(). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Anton Arapov <anton@redhat.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
generated by cgit (git 2.34.1) at 2025-09-15 19:13:45 +0000