summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-09-21Bluetooth: Add support for pairing via mgmt over LEVinicius Costa Gomes
Using the advertising cache we are able to infer the type of the remote device, and so trigger pairing over the correct link type. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-09-21Bluetooth: Use the same timeouts for both ACL and LE linksVinicius Costa Gomes
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-09-21Bluetooth: Add a flag to indicate that SMP is going onVinicius Costa Gomes
Add HCI_CONN_LE_SMP_PEND flag to indicate that SMP is pending for that connection. This allows to have information that an SMP procedure is going on for that connection. We use the HCI_CONN_ENCRYPT_PEND to indicate that encryption (HCI_LE_Start_Encryption) is pending for that connection. While a SMP procedure is going on we hold an reference to the connection, to avoid disconnections. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-09-21Bluetooth: Reset the security timer when a command is queuedVinicius Costa Gomes
Each time a SMP command is enqueued, we reset the SMP timer, this way we follow exactly what the spec mandates: "The Security Manager Timer shall be reset when an L2CAP SMP command is queued for transmission." Vol. 3, Part H, Section 3.4 Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-09-21Bluetooth: make use of connection number to optimize the schedulerLuiz Augusto von Dentz
This checks if there is any existing connection according to its type before start iterating in the list and immediately stop iterating when reaching the number of connections. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-09-21x86/rtc: Don't recursively acquire rtc_lockMatt Fleming
A deadlock was introduced on x86 in commit ef68c8f87ed1 ("x86: Serialize EFI time accesses on rtc_lock") because efi_get_time() and friends can be called with rtc_lock already held by read_persistent_time(), e.g.: timekeeping_init() read_persistent_clock() <-- acquire rtc_lock efi_get_time() phys_efi_get_time() <-- acquire rtc_lock <DEADLOCK> To fix this let's push the locking down into the get_wallclock() and set_wallclock() implementations. Only the clock implementations that access the x86 RTC directly need to acquire rtc_lock, so it makes sense to push the locking down into the rtc, vrtc and efi code. The virtualization implementations don't require rtc_lock to be held because they provide their own serialization. Signed-off-by: Matt Fleming <matt.fleming@intel.com> Acked-by: Jan Beulich <jbeulich@novell.com> Acked-by: Avi Kivity <avi@redhat.com> [for the virtualization aspect] Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Josh Boyer <jwboyer@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-09-21ASoC: Ensure we generate a driver nameMark Brown
Commit 873bd4c (ASoC: Don't set invalid name string to snd_card->driver field) broke generation of a driver name for all ASoC cards relying on the automatic generation of one. Fix this by using the old default with spaces replaced by underscores. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Takashi Iwai <tiwai@suse.de>
2011-09-21mfd: Fix generic irq chip ack function name for jz4740-adcLars-Peter Clausen
In commit 659fb32d1b6("genirq: replace irq_gc_ack() with {set,clr}_bit variants"), irq_gc_ack was renamed to irq_gc_ack_set_bit. The jz4740-adc driver still uses the old name which results in a compile error. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-09-21floppy: use del_timer_sync() in init cleanupCarsten Emde
When no floppy is found the module code can be released while a timer function is pending or about to be executed. CPU0 CPU1 floppy_init() timer_softirq() spin_lock_irq(&base->lock); detach_timer(); spin_unlock_irq(&base->lock); -> Interrupt del_timer(); return -ENODEV; module_cleanup(); <- EOI call_timer_fn(); OOPS Use del_timer_sync() to prevent this. Signed-off-by: Carsten Emde <C.Emde@osadl.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-09-21blk-cgroup: be able to remove the record of unplugged deviceWanlong Gao
The bug is we're not able to remove the device from blkio cgroup's per-device control files if it gets unplugged. To reproduce the bug: # mount -t cgroup -o blkio xxx /cgroup # cd /cgroup # echo "8:0 1000" > blkio.throttle.read_bps_device # unplug the device # cat blkio.throttle.read_bps_device 8:0 1000 # echo "8:0 0" > blkio.throttle.read_bps_device -bash: echo: write error: No such device After patching, the device removal will succeed. Thanks for the comments of Paul, Zefan, and Vivek. Signed-off-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Paul Menage <paul@paulmenage.org> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-09-21can/sja1000: driver for PEAK PCAN PCI/PCIe cardsWolfgang Grandegger
This patch add the peak_pci driver for the PCAN PCI/PCIe cards (1, 2, 3 or 4 channels) from PEAK Systems (http://www.peak-system.com). Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Tested-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-21ixgbe: fix possible null buffer errorJesse Brandeburg
It seems that at least one PPC machine would occasionally give a (valid) 0 as the return value from dma_map, this caused the ixgbe code to not work correctly. A fix is pending in the PPC tree to not return 0 from dma map, but we can also fix the driver to make sure we don't mess up in other arches as well. This patch is applicable to all current stable kernels. Ref: https://bugzilla.redhat.com/show_bug.cgi?id=683611 Reported-by: Neil Horman <nhorman@redhat.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> CC: Alexander Duyck <alexander.h.duyck@intel.com> CC: stable@kernel.org Tested-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-21tg3: fix VLAN tagging regressionKasper Pedersen
commit 92cd3a17ce9c719abb4c28dee3438e0c641f8de4 tg3: Simplify tx bd assignments broke VLAN tagging on outbound packets. It ifdef'ed BCM_KERNEL_SUPPORTS_8021Q, but this is not set anywhere. So vlan never gets set, and all packets are sent with vlan=0. v2: We can just remove the test. vlan_tx_tag_present is valid regardless of whether the 802.1q module is built. Tested on BCM5721 rev 11. Signed-off-by: Kasper Pedersen <kernel@kasperkp.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-20sparc, exec: remove redundant addr_limit assignmentMathias Krause
The address limit is already set in flush_old_exec() so this assignment of USER_DS is redundant. Signed-off-by: Mathias Krause <minipli@googlemail.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-21md: Avoid waking up a thread after it has been freed.NeilBrown
Two related problems: 1/ some error paths call "md_unregister_thread(mddev->thread)" without subsequently clearing ->thread. A subsequent call to mddev_unlock will try to wake the thread, and crash. 2/ Most calls to md_wakeup_thread are protected against the thread disappeared either by: - holding the ->mutex - having an active request, so something else must be keeping the array active. However mddev_unlock calls md_wakeup_thread after dropping the mutex and without any certainty of an active request, so the ->thread could theoretically disappear. So we need a spinlock to provide some protections. So change md_unregister_thread to take a pointer to the thread pointer, and ensure that it always does the required locking, and clears the pointer properly. Reported-by: "Moshe Melnikov" <moshe@zadarastorage.com> Signed-off-by: NeilBrown <neilb@suse.de> cc: stable@kernel.org
2011-09-20ARM: fix vmlinux.lds.S discarding sectionsRussell King
We are seeing linker errors caused by sections being discarded, despite the linker script trying to keep them. The result is (eg): `.exit.text' referenced in section `.alt.smp.init' of drivers/built-in.o: defined in discarded section `.exit.text' of drivers/built-in.o `.exit.text' referenced in section `.alt.smp.init' of net/built-in.o: defined in discarded section `.exit.text' of net/built-in.o This is the relevent part of the linker script (reformatted to make it clearer): | SECTIONS | { | /* | * unwind exit sections must be discarded before the rest of the | * unwind sections get included. | */ | /DISCARD/ : { | *(.ARM.exidx.exit.text) | *(.ARM.extab.exit.text) | } | ... | .exit.text : { | *(.exit.text) | *(.memexit.text) | } | ... | /DISCARD/ : { | *(.exit.text) | *(.memexit.text) | *(.exit.data) | *(.memexit.data) | *(.memexit.rodata) | *(.exitcall.exit) | *(.discard) | *(.discard.*) | } | } Now, this is what the linker manual says about discarded output sections: | The special output section name `/DISCARD/' may be used to discard | input sections. Any input sections which are assigned to an output | section named `/DISCARD/' are not included in the output file. No questions, no exceptions. It doesn't say "unless they are listed before the /DISCARD/ section." Now, this is what asn-generic/vmlinux.lds.S says: | /* | * Default discarded sections. | * | * Some archs want to discard exit text/data at runtime rather than | * link time due to cross-section references such as alt instructions, | * bug table, eh_frame, etc. DISCARDS must be the last of output | * section definitions so that such archs put those in earlier section | * definitions. | */ And guess what - the list _always_ includes .exit.text etc. Now, what's actually happening is that the linker is reading the script, and it finds the first /DISCARD/ output section at the beginning of the script. It continues reading the script, and finds the 'DISCARD' macro at the end, which having been postprocessed results in another /DISCARD/ output section. As the linker already contains the earlier /DISCARD/ output section, it adds it to that existing section, so it effectively is placed at the start. This can be seen by using the -M option to ld: | Linker script and memory map | | 0xc037c080 jiffies = jiffies_64 | | /DISCARD/ | *(.ARM.exidx.exit.text) | *(.ARM.extab.exit.text) | *(.exit.text) | *(.memexit.text) | *(.exit.data) | *(.memexit.data) | *(.memexit.rodata) | *(.exitcall.exit) | *(.discard) | *(.discard.*) | | 0xc0008000 . = 0xc0008000 | | .head.text 0xc0008000 0x1d0 | 0xc0008000 _text = . | *(.head.text) | .head.text 0xc0008000 0x1d0 arch/arm/kernel/head.o | 0xc0008000 stext | | .text 0xc0008200 0x2d78d0 | 0xc0008200 _stext = . | 0xc0008200 __exception_text_start = . | *(.exception.text) | .exception.text | ... As you can see, all the discarded sections are grouped together - and as a result of it being the first output section, they all appear before any other section. The result is that not only is the unwind information discarded (as intended), but also the .exit.text, despite us wanting to have the .exit.text preserved. We can't move the unwind information elsewhere, because it'll then be included even when we do actually discard the .exit.text (and similar) sections. So, work around this by avoiding the generic DISCARDS macro, and instead conditionalize the sections to be discarded ourselves. This avoids the ambiguity in how the linker assigns input sections to output sections, making our script less dependent on undocumented linker behaviour. Reported-by: Rob Herring <robherring2@gmail.com> Tested-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-09-20Merge branch 'fixes' of git://git.linaro.org/people/arnd/arm-socLinus Torvalds
* 'fixes' of git://git.linaro.org/people/arnd/arm-soc: mach-integrator: fix VGA base regression arm/dt: Tegra: Update SDHCI nodes to match bindings ARM: EXYNOS4: fix incorrect pad configuration for keypad row lines ARM: SAMSUNG: fix to prevent declaring duplicated ARM: SAMSUNG: fix watchdog reset issue with clk_get() ARM: S3C64XX: Remove un-used code backlight code on SMDK6410 ARM: EXYNOS4: restart clocksource while system resumes ARM: EXYNOS4: Fix routing timer interrupt to offline CPU ARM: EXYNOS4: Fix return type of local_timer_setup() ARM: EXYNOS4: Fix wrong pll type for vpll ARM: Dove: fix second SPI initialization call
2011-09-20Merge branch 'for-linus' of git://github.com/chrismason/linuxLinus Torvalds
* 'for-linus' of git://github.com/chrismason/linux: Btrfs: reserve sufficient space for ioctl clone
2011-09-20staging: zcache: fix cleancache crashSeth Jennings
After commit c5f5c4db3938 ("staging: zcache: fix crash on high memory swap") cleancache crashes on the first successful get. This was caused by a remaining virt_to_page() call in zcache_pampd_get_data_and_free() that only gets run in the cleancache path. The patch converts the virt_to_page() to struct page casting like was done for other instances in c5f5c4db3938. Signed-off-by: Seth Jennings <sjenning@linux.vnet.ibm.com> Tested-By: Valdis Kletnieks <valdis.kletnieks@vt.edu> Acked-by: Dan Magenheimer <dan.magenheimer@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-09-20mach-integrator: fix VGA base regressionLinus Walleij
The changes introduced in commit cc22b4c18540e5e8bf55c7d124044f9317527d3c "ARM: set vga memory base at run-time" Makes the Integrator/AP freeze completely. I appears that this is due to the VGA base address being assigned at PCI init time, while this base is needed earlier than that. Moving the initialization of the base address to the .map_io function solves this problem. Cc: Rob Herring <rob.herring@calxeda.com> Cc: Nicolas Pitre <nicolas.pitre@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-09-20arm/dt: Tegra: Update SDHCI nodes to match bindingsStephen Warren
The bindings were recently updated to have separate properties for each type of GPIO. Update the Device Tree source to match that. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-09-20net/phy: add IC+ IP101A and support APS.Giuseppe CAVALLARO
This patch adds the IC+ IP101A Single port 10/100 PHY and supports the APS (i.e. power saving mode while link is down) for both IP1001 and IP101A (where this mode is supported). Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-20net: pxa168: Fix build errors by including interrupt.hTanmay Upadhyay
Commit a6b7a407865aab9f849dd99a71072b7cd1175116 removed linux/interrupt.h from netdevice.h. This fixes below build failure drivers/net/pxa168_eth.c: In function 'pxa168_eth_collect_events': drivers/net/pxa168_eth.c:866: error: 'IRQ_NONE' undeclared (first use in this function) drivers/net/pxa168_eth.c:866: error: (Each undeclared identifier is reported only once drivers/net/pxa168_eth.c:866: error: for each function it appears in.) drivers/net/pxa168_eth.c: At top level: drivers/net/pxa168_eth.c:913: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'pxa168_eth_int_handler' drivers/net/pxa168_eth.c: In function 'pxa168_eth_open': drivers/net/pxa168_eth.c:1133: error: implicit declaration of function 'request_irq' drivers/net/pxa168_eth.c:1133: error: 'pxa168_eth_int_handler' undeclared (first use in this function) drivers/net/pxa168_eth.c:1134: error: 'IRQF_DISABLED' undeclared (first use in this function) drivers/net/pxa168_eth.c:1160: error: implicit declaration of function 'free_irq' Signed-off-by: Tanmay Upadhyay <tanmay.upadhyay@einfochips.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-20netconsole: switch init_netconsole() to late_initcallLin Ming
Commit 88491d8(drivers/net: Kconfig & Makefile cleanup) causes a regression that netconsole does not work if netconsole and network device driver are build into kernel, because netconsole is linked before network device driver. Andrew Morton suggested to fix this with initcall ordering. Fixes it by switching init_netconsole() to late_initcall. Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-20gianfar: Fix overflow check and return value for gfar_get_cls_all()Ben Hutchings
This function may currently fill one entry beyond the end of the array it is given. It also doesn't return an error code in case it does detect overflow. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-20ppp_generic: fix multilink fragment MTU calculation (again)Henry Wong
When using MLPPP, the maximum size of a fragment is incorrectly calculated with an offset of -2. This patch reverses the changes in the patch found here: http://marc.info/?l=linux-netdev&m=123541324010539&w=2 The value of hdrlen includes the size of both the 2-byte PPP protocol field and the 2- or 4-byte multilink header (2+4=6 for long sequence numbers, 2+2=4 for short sequence numbers). Section 2 of RFC1661 says that the MRU that is negotiated (i.e., the MTU of the sending system) includes only the PPP payload but not the protocol field, thus the correct MTU should be the link's MTU minus the multilink header (mtu - (hdrlen-2)). The incorrect calculation causes Linux to fragment packets to a size two bytes smaller than the allowed MTU. While not technically illegal, this behaviour confounds MRU-tuning to avoid PPP-layer fragmentation. Signed-off-by: Henry Wong <henry@stuffedcow.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-20GRETH: avoid overwrite IP-stack's IP-frags checksumDaniel Hellstrom
The GRETH GBIT core does not do checksum offloading for IP segmentation. This patch adds a check in the xmit function to determine if the stack has calculated the checksum for us. Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-20GRETH: RX/TX bytes were never increasedDaniel Hellstrom
Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-20ipv6: fix a possible double freeRoy Li
When calling snmp6_alloc_dev fails, the snmp6 relevant memory are freed by snmp6_alloc_dev. Calling in6_dev_finish_destroy will free these memory twice. Double free will lead that undefined behavior occurs. Signed-off-by: Roy Li <rongqing.li@windriver.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-20netxen: Add pcie workaroundRajesh Borundia
o A performance drop was seen with firmware loaded from flash. This workaround fixes it. o Updated driver version to 4.0.77 Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-20netxen: Fix vhdr_len in case of non vlan packets.Rajesh Borundia
o Set vlan header length to zero. Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-20ip6_tunnel: add optional fwmark inheritEric Dumazet
Add IP6_TNL_F_USE_ORIG_FWMARK to ip6_tunnel, so that ip6_tnl_xmit2() makes a route lookup taking into account skb->fwmark and doesnt cache lookup result. This permits more flexibility in policies and firewall setups. To setup such a tunnel, "fwmark inherit" option should be added to "ip -f inet6 tunnel" command. Reported-by: Anders Franzen <Anders.Franzen@ericsson.com> CC: Hans Schillström <hans.schillstrom@ericsson.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-20Merge branch 'btrfs-3.0' into for-linusChris Mason
2011-09-20Btrfs: reserve sufficient space for ioctl cloneSage Weil
Fix a crash/BUG_ON in the clone ioctl due to insufficient reservation. We need to reserve space for: - adjusting the old extent (possibly splitting it) - adding the new extent - updating the inode Signed-off-by: Sage Weil <sage@newdream.net> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-09-20rtlwifi: Combine instances of RTL_HAL_IS_CCK_RATE macros.Larry Finger
Three drivers, rtl8192ce, rtl8192cu and rtl8192de, use the same macro to check if a particular rate is in the CCK set. This common code is relocated to a common header file. A distinct macro used by rtl8192se with the same name is renamed. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-20rtlwifi: rtl8192de: Change modinfo messagesLarry Finger
The various modparam messages are difficult to understand. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-20rtlwifi: rtl8192se: Change modinfo messagesLarry Finger
The various modparam messages are difficult to understand. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-20rtlwifi: rtl8192ce: Change modinfo messagesLarry Finger
The various modparam messages are difficult to understand. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-20ath9k: Store noise immunity values across scanningRajkumar Manoharan
CCK/OFDM noise immunilty values are always reset to defaults during bgscan. This could affect the link quality and performance when the STA is associated in a noisy channel. So do not override the learned values across the scanning. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-20NFC: driver for TI shared transportIlan Elias
Signed-off-by: Ilan Elias <ilane@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-20NFC: basic NCI protocol implementationIlan Elias
The NFC Controller Interface (NCI) is a standard communication protocol between an NFC Controller (NFCC) and a Device Host (DH), defined by the NFC Forum. Signed-off-by: Ilan Elias <ilane@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-20NFC: move nfc.h from include/net to include/net/nfcIlan Elias
The file nfc.h was moved from include/net to include/net/nfc, since new NFC header files will be added to include/net/nfc. Signed-off-by: Ilan Elias <ilane@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-20NFC: Add dev_up and dev_down control operationsIlan Elias
Add 2 new nfc control operations: dev_up to turn on the nfc device dev_down to turn off the nfc device Signed-off-by: Ilan Elias <ilane@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-20mac80211: fix indentationAlexander Simon
Signed-off-by: Alexander Simon <an.alexsimon@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-20wireless: Do not allow disabled channel in scan requestRajkumar Manoharan
cfg80211_conn_scan allows disabled channels at scan request. Hence probe request was seen at the disabled one. This patch ensures that disabled channel never be added into the scan request's channel list. Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-20Merge branch 'davem.r8169.fixes' of git://violet.fr.zoreil.com/romieu/linuxDavid S. Miller
2011-09-20Merge branch 'tipc-Sep17-2011' of ↵David S. Miller
git://openlinux.windriver.com/people/paulg/net-next
2011-09-20macvtap: fix the uninitialized var using in macvtap_alloc_skb()Jason Wang
Commit d1b08284 use new frag API but would leave f to be used uninitialized, this patch fix it. Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-20Merge git://github.com/Jkirsher/net-nextDavid S. Miller
2011-09-20Merge branch 'master' of git://git.infradead.org/users/linville/wirelessJohn W. Linville
Conflicts: drivers/net/wireless/iwlwifi/iwl-pci.c drivers/net/wireless/iwlwifi/iwl-trans-pcie-tx.c drivers/net/wireless/rt2x00/rt2800usb.c drivers/net/wireless/wl12xx/main.c
generated by cgit (git 2.34.1) at 2025-09-14 17:14:27 +0000