summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-03-28drm/virtio: move virtio_gpu_object_{attach, detach} calls.Gerd Hoffmann
Drop the dummy ttm backend implementation, add a real one for TTM_PL_FLAG_TT objects. The bin/unbind callbacks will call virtio_gpu_object_{attach,detach}, to update the object state on the host side, instead of invoking those calls from the move_notify() callback. With that in place the move and move_notify callbacks are not needed any more, so drop them. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Noralf Trønnes <noralf@tronnes.org> Link: http://patchwork.freedesktop.org/patch/msgid/20190318113332.10900-2-kraxel@redhat.com
2019-03-28drm/virtio: add virtio-gpu-features debugfs file.Gerd Hoffmann
This file prints which features the virtio-gpu device has. Also add "virtio-gpu-" prefix to the existing fence file, to make clear this is a driver-specific debugfs file. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Noralf Trønnes <noralf@tronnes.org> Link: http://patchwork.freedesktop.org/patch/msgid/20190320083612.32067-1-kraxel@redhat.com
2019-03-28drm/virtio: remove set but not used variable 'vgdev'YueHaibing
Fixes gcc '-Wunused-but-set-variable' warning: drivers/gpu/drm/virtio/virtgpu_ttm.c: In function 'virtio_gpu_init_mem_type': drivers/gpu/drm/virtio/virtgpu_ttm.c:117:28: warning: variable 'vgdev' set but not used [-Wunused-but-set-variable] drivers/gpu/drm/virtio/virtgpu_ttm.c: In function 'virtio_gpu_bo_swap_notify': drivers/gpu/drm/virtio/virtgpu_ttm.c:300:28: warning: variable 'vgdev' set but not used [-Wunused-but-set-variable] It is never used since introduction in dc5698e80cf7 ("Add virtio gpu driver.") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/20190325092631.152060-1-yuehaibing@huawei.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-03-28ARM: dts: at91: Fix typo in ISC_D0 on PC9David Engraf
The function argument for the ISC_D0 on PC9 was incorrect. According to the documentation it should be 'C' aka 3. Signed-off-by: David Engraf <david.engraf@sysgo.com> Reviewed-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com> Fixes: 7f16cb676c00 ("ARM: at91/dt: add sama5d2 pinmux") Cc: <stable@vger.kernel.org> # v4.4+
2019-03-28cpufreq: scpi: Fix use after freeVincent Stehlé
Free the priv structure only after we are done using it. Fixes: 1690d8bb91e370ab ("cpufreq: scpi/scmi: Fix freeing of dynamic OPPs") Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net> Cc: 4.20+ <stable@vger.kernel.org> # 4.20+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-03-28Merge tag 'v5.1-rc2' into core/urgent, to resolve a conflictIngo Molnar
Conflicts: include/linux/kcore.h Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-03-28ACPICA: Clear status of GPEs before enabling themFurquan Shaikh
Commit 18996f2db918 ("ACPICA: Events: Stop unconditionally clearing ACPI IRQs during suspend/resume") was added to stop clearing event status bits unconditionally in the system-wide suspend and resume paths. This was done because of an issue with a laptop lid appaering to be closed even when it was used to wake up the system from suspend (see https://bugzilla.kernel.org/show_bug.cgi?id=196249), which happened because event status bits were cleared unconditionally on system resume. Though this change fixed the issue in the resume path, it introduced regressions in a few suspend paths. First regression was reported and fixed in the S5 entry path by commit fa85015c0d95 ("ACPICA: Clear status of all events when entering S5"). Next regression was reported and fixed for all legacy sleep paths by commit f317c7dc12b7 ("ACPICA: Clear status of all events when entering sleep states"). However, there still is a suspend-to-idle regression, since suspend-to-idle does not follow the legacy sleep paths. In the suspend-to-idle case, wakeup is enabled as part of device suspend. If the status bits of wakeup GPEs are set when they are enabled, it causes a premature system wakeup to occur. To address that problem, partially revert commit 18996f2db918 to restore GPE status bits clearing before the GPE is enabled in acpi_ev_enable_gpe(). Fixes: 18996f2db918 ("ACPICA: Events: Stop unconditionally clearing ACPI IRQs during suspend/resume") Signed-off-by: Furquan Shaikh <furquan@google.com> Cc: 4.17+ <stable@vger.kernel.org> # 4.17+ [ rjw: Subject & changelog ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-03-28s390/cpumf: Fix warning from check_processor_idThomas Richter
Function __hw_perf_event_init() used a CPU variable without ensuring CPU preemption has been disabled. This caused the following warning in the kernel log: [ 7.277085] BUG: using smp_processor_id() in preemptible [00000000] code: cf-csdiag/1892 [ 7.277111] caller is cf_diag_event_init+0x13a/0x338 [ 7.277122] CPU: 10 PID: 1892 Comm: cf-csdiag Not tainted 5.0.0-20190318.rc0.git0.9e1a11e0f602.300.fc29.s390x+debug #1 [ 7.277131] Hardware name: IBM 2964 NC9 712 (LPAR) [ 7.277139] Call Trace: [ 7.277150] ([<000000000011385a>] show_stack+0x82/0xd0) [ 7.277161] [<0000000000b7a71a>] dump_stack+0x92/0xd0 [ 7.277174] [<00000000007b7e9c>] check_preemption_disabled+0xe4/0x100 [ 7.277183] [<00000000001228aa>] cf_diag_event_init+0x13a/0x338 [ 7.277195] [<00000000002cf3aa>] perf_try_init_event+0x72/0xf0 [ 7.277204] [<00000000002d0bba>] perf_event_alloc+0x6fa/0xce0 [ 7.277214] [<00000000002dc4a8>] __s390x_sys_perf_event_open+0x398/0xd50 [ 7.277224] [<0000000000b9e8f0>] system_call+0xdc/0x2d8 [ 7.277233] 2 locks held by cf-csdiag/1892: [ 7.277241] #0: 00000000976f5510 (&sig->cred_guard_mutex){+.+.}, at: __s390x_sys_perf_event_open+0xd2e/0xd50 [ 7.277257] #1: 00000000363b11bd (&pmus_srcu){....}, at: perf_event_alloc+0x52e/0xce0 The variable is now accessed in proper context. Use get_cpu_var()/put_cpu_var() pair to disable preemption during access. As the hardware authorization settings apply to all CPUs, it does not matter which CPU is used to check the authorization setting. Remove the event->count assignment. It is not needed as function perf_event_alloc() allocates memory for the event with kzalloc() and thus count is already set to zero. Fixes: fe5908bccc56 ("s390/cpum_cf_diag: Add support for s390 counter facility diagnostic trace") Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-03-28USB: serial: option: add Olicard 600Bjørn Mork
This is a Qualcomm based device with a QMI function on interface 4. It is mode switched from 2020:2030 using a standard eject message. T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 6 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2020 ProdID=2031 Rev= 2.32 S: Manufacturer=Mobile Connect S: Product=Mobile Connect S: SerialNumber=0123456789ABCDEF C:* #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none) E: Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=125us Cc: stable@vger.kernel.org Signed-off-by: Bjørn Mork <bjorn@mork.no> [ johan: use tabs to align comments in adjacent lines ] Signed-off-by: Johan Hovold <johan@kernel.org>
2019-03-28USB: serial: cp210x: add new device idGreg Kroah-Hartman
Lorenz Messtechnik has a device that is controlled by the cp210x driver, so add the device id to the driver. The device id was provided by Silicon-Labs for the devices from this vendor. Reported-by: Uli <t9cpu@web.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2019-03-27vrf: prevent adding upper devicesSabrina Dubroca
VRF devices don't work with upper devices. Currently, it's possible to add a VRF device to a bridge or team, and to create macvlan, macsec, or ipvlan devices on top of a VRF (bond and vlan are prevented respectively by the lack of an ndo_set_mac_address op and the NETIF_F_VLAN_CHALLENGED feature flag). Fix this by setting the IFF_NO_RX_HANDLER flag (introduced in commit f5426250a6ec ("net: introduce IFF_NO_RX_HANDLER")). Cc: David Ahern <dsahern@gmail.com> Fixes: 193125dbd8eb ("net: Introduce VRF device driver") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-28crypto: caam - fix copy of next buffer for xcbc and cmacIuliana Prodan
Fix a side effect of adding xcbc support, when the next_buffer is not copied. The issue occurs, when there is stored from previous state a blocksize buffer and received, a less than blocksize, from user. In this case, the nents for req->src is 0, and the next_buffer is not copied. An example is: { .tap = { 17, 15, 8 }, .psize = 40, .np = 3, .ksize = 16, } Fixes: 12b8567f6fa4 ("crypto: caam - add support for xcbc(aes)") Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com> Reviewed-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-03-27Merge branch 'thunderx-fix-receive-buffer-page-recycling'David S. Miller
Dean Nelson says: ==================== thunderx: fix receive buffer page recycling In attempting to optimize receive buffer page recycling for XDP, commit 773225388dae15e72790 ("net: thunderx: Optimize page recycling for XDP") inadvertently introduced two problems for the non-XDP case, that will be addressed by this patch series. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-27thunderx: eliminate extra calls to put_page() for pages held for recyclingDean Nelson
For the non-XDP case, commit 773225388dae15e72790 ("net: thunderx: Optimize page recycling for XDP") added code to nicvf_free_rbdr() that, when releasing the additional receive buffer page reference held for recycling, repeatedly calls put_page() until the page's _refcount goes to zero. Which results in the page being freed. This is not okay if the page's _refcount was greater than 1 (in the non-XDP case), because nicvf_free_rbdr() should not be subtracting more than what nicvf_alloc_page() had previously added to the page's _refcount, which was only 1 (in the non-XDP case). This can arise if a received packet is still being processed and the receive buffer (i.e., skb->head) has not yet been freed via skb_free_head() when nicvf_free_rbdr() is spinning through the aforementioned put_page() loop. If this should occur, when the received packet finishes processing and skb_free_head() is called, various problems can ensue. Exactly what, depends on whether the page has already been reallocated or not, anything from "BUG: Bad page state ... ", to "Unable to handle kernel NULL pointer dereference ..." or "Unable to handle kernel paging request...". So this patch changes nicvf_free_rbdr() to only call put_page() once for pages held for recycling (in the non-XDP case). Fixes: 773225388dae ("net: thunderx: Optimize page recycling for XDP") Signed-off-by: Dean Nelson <dnelson@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-27thunderx: enable page recycling for non-XDP caseDean Nelson
Commit 773225388dae15e72790 ("net: thunderx: Optimize page recycling for XDP") added code to nicvf_alloc_page() that inadvertently disables receive buffer page recycling for the non-XDP case by always NULL'ng the page pointer. This patch corrects two if-conditionals to allow for the recycling of non-XDP mode pages by only setting the page pointer to NULL when the page is not ready for recycling. Fixes: 773225388dae ("net: thunderx: Optimize page recycling for XDP") Signed-off-by: Dean Nelson <dnelson@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-27net: mii: Fix PAUSE cap advertisement from linkmode_adv_to_lcl_adv_t() helperClaudiu Manoil
With a recent link mode advertisement code update this helper providing local pause capability translation used for flow control link mode negotiation got broken. For eth drivers using this helper, the issue is apparent only if either PAUSE or ASYM_PAUSE is being advertised. Fixes: 3c1bcc8614db ("net: ethernet: Convert phydev advertize and supported from u32 to link mode") Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-27net: hns3: fix compile errorXi Wang
Currently, the rules for configuring search paths in Kbuild have changed, this will lead some erros when compiling hns3 with the following command: make O=DIR M=drivers/net/ethernet/hisilicon/hns3 drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.c:11:10: fatal error: hnae3.h: No such file or directory This patch fix it by adding $(srctree)/ prefix to the serach paths. Signed-off-by: Xi Wang <wangxi11@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-27ila: Fix rhashtable walker list corruptionHerbert Xu
ila_xlat_nl_cmd_flush uses rhashtable walkers allocated from the stack but it never frees them. This corrupts the walker list of the hash table. This patch fixes it. Reported-by: syzbot+dae72a112334aa65a159@syzkaller.appspotmail.com Fixes: b6e71bdebb12 ("ila: Flush netlink command to clear xlat...") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-27MAINTAINERS: Fix documentation file name for PHY LibraryFlorian Fainelli
MAINTAINERS still pointed to phy.txt after moving this file into the rst format, fix this. Reported-by: Joe Perches <joe@perches.com> Fixes: 25fe02d00a1e ("Documentation: net: phy: switch documentation to rst format") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-27net: datagram: fix unbounded loop in __skb_try_recv_datagram()Paolo Abeni
Christoph reported a stall while peeking datagram with an offset when busy polling is enabled. __skb_try_recv_datagram() uses as the loop termination condition 'queue empty'. When peeking, the socket queue can be not empty, even when no additional packets are received. Address the issue explicitly checking for receive queue changes, as currently done by __skb_wait_for_more_packets(). Fixes: 2b5cd0dfa384 ("net: Change return type of sk_busy_loop from bool to void") Reported-and-tested-by: Christoph Paasch <cpaasch@apple.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-27net: dsa: mv88e6xxx: fix few issues in mv88e6390x_port_set_cmodeHeiner Kallweit
This patches fixes few issues in mv88e6390x_port_set_cmode(). 1. When entering the function the old cmode may be 0, in this case mv88e6390x_serdes_get_lane() returns -ENODEV. As result we bail out and have no chance to set a new mode. Therefore deal properly with -ENODEV. 2. Once we have disabled power and irq, let's set the cached cmode to 0. This reflects the actual status and is cleaner if we bail out with an error in the following function calls. 3. The cached cmode is used by mv88e6390x_serdes_get_lane(), mv88e6390_serdes_power_lane() and mv88e6390_serdes_irq_enable(). Currently we set the cached mode to the new one at the very end of the function only, means until then we use the old one what may be wrong. 4. When calling mv88e6390_serdes_irq_enable() we use the lane value belonging to the old cmode. Get the lane belonging to the new cmode before calling this function. It's hard to provide a good "Fixes" tag because quite a few smaller changes have been done to the code in question recently. Fixes: d235c48b40d3 ("net: dsa: mv88e6xxx: power serdes on/off for 10G interfaces on 6390X") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-28drm: rcar-du: lvds: Set LVEN and LVRES bits together on D3Laurent Pinchart
On the D3 SoC the LVDS PHY must be enabled in the same register write that enables the LVDS output. Skip writing the LVEN bit independently on that platform, it will be set by the write that sets LVRES. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
2019-03-28drm: rcar-du: lvds: Adjust operating frequency for D3 and E3Laurent Pinchart
The D3 and E3 SoCs have different pixel clock frequency limits for the LVDS encoder than the other SoCs in the Gen3 family. Adjust the mode fixup implementation accordingly. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
2019-03-28drm: rcar-du: Link CRTCs to the DU deviceKieran Bingham
The rcar_du_crtc functions have a heavy reliance on the rcar_du_group structure, in many cases just to access the DU device context. To better separate the groups out of the CRTC handling code, give the rcar_du_crtc its own pointer to the device and remove the indirection through the group pointers. Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2019-03-28drm: rcar-du: lvds: Fix post-DLL divider calculationLaurent Pinchart
The PLL parameters are computed by looping over the range of acceptable M, N and E values, and selecting the combination that produces the output frequency closest to the target. The internal frequency constraints are taken into account by restricting the tested values for the PLL parameters, reducing the search space. The target frequency, however, is only taken into account when computing the post-PLL divider, which can result in a 0 value for the divider when the PLL output frequency being tested is lower than half of the target frequency. Subsequent loops will produce a better set of PLL parameters, but for some of the iterations this can result in a division by 0. Fix it by clamping the divider value. We could instead restrict the E values being tested in the inner loop, but that would require additional calculation that would likely be less efficient as the E parameter can only take three different values. Fixes: c25c01361199 ("drm: rcar-du: lvds: D3/E3 support") Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
2019-03-28drm: Forward-declare struct drm_format_info in drm_framebuffer.hLaurent Pinchart
drm_framebuffer.h makes use of a pointer to struct drm_format_info but doesn't include drm_fourcc.h (neither directly nor indirectly). Forward-declare the structure. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
2019-03-28drm: rcar-du: Remove unused prototypesKieran Bingham
The CRTC suspend and resume functions have been replaced, but the prototypes were not removed. Remove the redundant definitions. Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2019-03-28drm: rcar-du: crtc: Make local functions staticKieran Bingham
The rcar_du_crtc_mode_valid() and rcar_du_crtc_get_crc_sources() functions are accessed only through a function pointer table. Convert the function definitions to be static to the module. Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2019-03-28drm: Fix subtle spelling error in drm_crtc_stateKieran Bingham
The drm_crtc_state documentation contains a subtle misspelling of the word subtle. Correct it. Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2019-03-28drm: rcar-du: Support panels connected directly to the DPAD outputsLaurent Pinchart
The R-Car DU driver assumes that a bridge is always connected to the DU output. This is valid for the LVDS and HDMI outputs, but the DPAD outputs can be connected directly to a panel, in which case no bridge is available. To support this use case, detect whether the entities connected to the DU DPAD outputs are encoders or panels based on the number of ports of their DT node, and retrieve the corresponding type of DRM objects. For panels, additionally create panel bridge instances. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Tested-by: Kevin Key <kevin.key@gentex.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
2019-03-27drm/amd/powerplay: update current profile mode only when it's really appliedEvan Quan
No need to update current profile mode if the new profile mode does not take effect in fact. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Kent Russell <kent.russell@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-03-27drm/amd/display: fix odm output gamma programmingDmytro Laktyushkin
Currently only top pipe gets output tf programmed. This change makes all odm head pipes get output tf programmed. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-03-27drm/amd/display: Populate macro_tile_size field for dmlJoshua Aberback
Create a functions to return swizzle types for dml Signed-off-by: Joshua Aberback <joshua.aberback@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-03-27drm/amd/display: use dc_is_virtual instead of ENUMEric Bernstein
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-03-27drm/amd/display: 3.2.24Aric Cyr
Signed-off-by: Aric Cyr <aric.cyr@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-03-27drm/amd/display: Pass SDP spliting in parametersNikola Cornij
pass SDP splitting when setting stream attributes for future use Signed-off-by: Nikola Cornij <nikola.cornij@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-03-27drm/amd/display: Create clock funcsEryk Brol
Create dccg_init and init_clocks for future use Signed-off-by: Eryk Brol <eryk.brol@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-03-27drm/amd/display: Clean up old pplib interface functionsFatemeh Darbehani
[Why] set_display_requirement, dcn1_pplib_apply_display_requirements are no longer used and should be removed. Signed-off-by: Fatemeh Darbehani <fatemeh.darbehani@amd.com> Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-03-27drm/amd/display: Pass init_data into DCN resource creationHarry Wentland
[WHY] The resource constructor currently needs num_virtual_links from init_data but will need access to other items provided by DM. [HOW] Pass init_data into DCN create_resource_pool functions. Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Acked-by: Hersen Wu <hersenxs.wu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-03-27drm/amd/display: Handle branch device with DFP count = 0 case.Hugo Hu
[Why] When you have a SST branch device the driver, Even no sink device connected, it also send HPD with a valid EDID. Driver will config it to DP sink. Therefore, there're two displays in display setting. DPCD 0x05, DFP_PRESENT = 1 (branch device), DFP_TYPE = 00 (Display Port) [How] Driver determine DPCD 0x05 DFP_PRESENT = 1(branch) as an active dongle And check DFP count. Signed-off-by: Hugo Hu <hugo.hu@amd.com> Reviewed-by: Hugo Hu <Hugo.Hu@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-03-27drm/amd/display: program default output gammahersen wu
program default output gamma if no user specific gamma parameters passed. Signed-off-by: hersen wu <hersenxs.wu@amd.com> Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-03-27drm/amd/display: add preferred pipe split logicJun Lei
[why] existing logic finds "first free pipe from 5 -> 0" to split this will cause certain sequences to require DC to move an MPCC from one tree to another, which is unsupported this leads to blackscreen to mitigate this problem, we will always try to acquire the "preferred" pipe, and each pipe has a unique preferred pipe this means we avoid most of the scenarios where pipe splitting leads to moving MPCC from one tree to another Signed-off-by: Jun Lei <Jun.Lei@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-03-27drm/amdgpu: don't put the root PD into the relocated listChristian König
Instead of skipping the root PD while processing the relocated list just never put it on the list in the first place. This avoids walking the list all together when the root PD is the only entry and so also avoids trying to submit a zero sized IB to the SDMA. Signed-off-by: Christian König <christian.koenig@amd.com> Tested-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-03-27drm/amdgpu: drop the ib from the VM update parametersChristian König
It is redundant with the job pointer. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-03-27drm/amdgpu: move VM table mapping into the backend as wellChristian König
Clean that up further and also fix another case where the BO wasn't kmapped for CPU based updates. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-03-27drm/amdgpu: XGMI pstate switch initial supportshaoyunl
Driver vote low to high pstate switch whenever there is an outstanding XGMI mapping request. Driver vote high to low pstate when all the outstanding XGMI mapping is terminated. Signed-off-by: shaoyunl <shaoyun.liu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-03-27drm/amdgpu: use the new VM backend for clearsChristian König
And remove the existing code when it is unused. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Chunming Zhou <david1.zhou@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-03-27drm/amdgpu: defer cmd/fence/fw buffers destroy on hw_init failureEvan Quan
As the cleanup jobs performed in pre_fini may still need these buffers. NULL pointer dereference will be triggered without them. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-03-27drm/amdgpu: add more debug friendly promptsEvan Quan
Large piece of codes share one error prompt. That is not friendly for debugging. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-03-27drm/amdgpu: error out on mode1 reset failureEvan Quan
The error return value should be correctly reflected. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit (git 2.34.1) at 2025-09-16 11:11:59 +0000