| Age | Commit message (Collapse) | Author |
|---|
|
If failed to add SF, error handling doesn't delete the SF from the
SF table. But the hw resources are deleted. So when unload driver,
hw resources will be deleted again. Firmware will report syndrome
0x68def3 which means "SF is not allocated can not deallocate".
Fix it by delete SF from SF table if failed to add SF.
Fixes: 2597ee190b4e ("net/mlx5: Call mlx5_sf_id_erase() once in mlx5_sf_dealloc()")
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Shay Drori <shayd@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Fix a lockdep warning [1] observed during the write combining test.
The warning indicates a potential nested lock scenario that could lead
to a deadlock.
However, this is a false positive alarm because the SF lock and its
parent lock are distinct ones.
The lockdep confusion arises because the locks belong to the same object
class (i.e., struct mlx5_core_dev).
To resolve this, the code has been refactored to avoid taking both
locks. Instead, only the parent lock is acquired.
[1]
raw_ethernet_bw/2118 is trying to acquire lock:
[ 213.619032] ffff88811dd75e08 (&dev->wc_state_lock){+.+.}-{3:3}, at:
mlx5_wc_support_get+0x18c/0x210 [mlx5_core]
[ 213.620270]
[ 213.620270] but task is already holding lock:
[ 213.620943] ffff88810b585e08 (&dev->wc_state_lock){+.+.}-{3:3}, at:
mlx5_wc_support_get+0x10c/0x210 [mlx5_core]
[ 213.622045]
[ 213.622045] other info that might help us debug this:
[ 213.622778] Possible unsafe locking scenario:
[ 213.622778]
[ 213.623465] CPU0
[ 213.623815] ----
[ 213.624148] lock(&dev->wc_state_lock);
[ 213.624615] lock(&dev->wc_state_lock);
[ 213.625071]
[ 213.625071] *** DEADLOCK ***
[ 213.625071]
[ 213.625805] May be due to missing lock nesting notation
[ 213.625805]
[ 213.626522] 4 locks held by raw_ethernet_bw/2118:
[ 213.627019] #0: ffff88813f80d578 (&uverbs_dev->disassociate_srcu){.+.+}-{0:0},
at: ib_uverbs_ioctl+0xc4/0x170 [ib_uverbs]
[ 213.628088] #1: ffff88810fb23930 (&file->hw_destroy_rwsem){.+.+}-{3:3},
at: ib_init_ucontext+0x2d/0xf0 [ib_uverbs]
[ 213.629094] #2: ffff88810fb23878 (&file->ucontext_lock){+.+.}-{3:3},
at: ib_init_ucontext+0x49/0xf0 [ib_uverbs]
[ 213.630106] #3: ffff88810b585e08 (&dev->wc_state_lock){+.+.}-{3:3},
at: mlx5_wc_support_get+0x10c/0x210 [mlx5_core]
[ 213.631185]
[ 213.631185] stack backtrace:
[ 213.631718] CPU: 1 UID: 0 PID: 2118 Comm: raw_ethernet_bw Not tainted
6.12.0-rc7_internal_net_next_mlx5_89a0ad0 #1
[ 213.632722] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS
rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[ 213.633785] Call Trace:
[ 213.634099]
[ 213.634393] dump_stack_lvl+0x7e/0xc0
[ 213.634806] print_deadlock_bug+0x278/0x3c0
[ 213.635265] __lock_acquire+0x15f4/0x2c40
[ 213.635712] lock_acquire+0xcd/0x2d0
[ 213.636120] ? mlx5_wc_support_get+0x18c/0x210 [mlx5_core]
[ 213.636722] ? mlx5_ib_enable_lb+0x24/0xa0 [mlx5_ib]
[ 213.637277] __mutex_lock+0x81/0xda0
[ 213.637697] ? mlx5_wc_support_get+0x18c/0x210 [mlx5_core]
[ 213.638305] ? mlx5_wc_support_get+0x18c/0x210 [mlx5_core]
[ 213.638902] ? rcu_read_lock_sched_held+0x3f/0x70
[ 213.639400] ? mlx5_wc_support_get+0x18c/0x210 [mlx5_core]
[ 213.640016] mlx5_wc_support_get+0x18c/0x210 [mlx5_core]
[ 213.640615] set_ucontext_resp+0x68/0x2b0 [mlx5_ib]
[ 213.641144] ? debug_mutex_init+0x33/0x40
[ 213.641586] mlx5_ib_alloc_ucontext+0x18e/0x7b0 [mlx5_ib]
[ 213.642145] ib_init_ucontext+0xa0/0xf0 [ib_uverbs]
[ 213.642679] ib_uverbs_handler_UVERBS_METHOD_GET_CONTEXT+0x95/0xc0
[ib_uverbs]
[ 213.643426] ? _copy_from_user+0x46/0x80
[ 213.643878] ib_uverbs_cmd_verbs+0xa6b/0xc80 [ib_uverbs]
[ 213.644426] ? ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0x130/0x130
[ib_uverbs]
[ 213.645213] ? __lock_acquire+0xa99/0x2c40
[ 213.645675] ? lock_acquire+0xcd/0x2d0
[ 213.646101] ? ib_uverbs_ioctl+0xc4/0x170 [ib_uverbs]
[ 213.646625] ? reacquire_held_locks+0xcf/0x1f0
[ 213.647102] ? do_user_addr_fault+0x45d/0x770
[ 213.647586] ib_uverbs_ioctl+0xe0/0x170 [ib_uverbs]
[ 213.648102] ? ib_uverbs_ioctl+0xc4/0x170 [ib_uverbs]
[ 213.648632] __x64_sys_ioctl+0x4d3/0xaa0
[ 213.649060] ? do_user_addr_fault+0x4a8/0x770
[ 213.649528] do_syscall_64+0x6d/0x140
[ 213.649947] entry_SYSCALL_64_after_hwframe+0x4b/0x53
[ 213.650478] RIP: 0033:0x7fa179b0737b
[ 213.650893] Code: ff ff ff 85 c0 79 9b 49 c7 c4 ff ff ff ff 5b 5d 4c
89 e0 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa b8
10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d
7d 2a 0f 00 f7 d8 64 89 01 48
[ 213.652619] RSP: 002b:00007ffd2e6d46e8 EFLAGS: 00000246 ORIG_RAX:
0000000000000010
[ 213.653390] RAX: ffffffffffffffda RBX: 00007ffd2e6d47f8 RCX:
00007fa179b0737b
[ 213.654084] RDX: 00007ffd2e6d47e0 RSI: 00000000c0181b01 RDI:
0000000000000003
[ 213.654767] RBP: 00007ffd2e6d47c0 R08: 00007fa1799be010 R09:
0000000000000002
[ 213.655453] R10: 00007ffd2e6d4960 R11: 0000000000000246 R12:
00007ffd2e6d487c
[ 213.656170] R13: 0000000000000027 R14: 0000000000000001 R15:
00007ffd2e6d4f70
Fixes: d98995b4bf98 ("net/mlx5: Reimplement write combining test")
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
User added steering rules at RDMA_TX were being added to the first prio,
which is the counters prio.
Fix that so that they are correctly added to the BYPASS_PRIO instead.
Fixes: 24670b1a3166 ("net/mlx5: Add support for RDMA TX steering")
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.13-2025-01-15:
amdgpu:
- SMU 13 fix
- DP MST fixes
- DCN 3.5 fix
- PSR fixes
- eDP fix
- VRR fix
- Enforce isolation fixes
- GFX 12 fix
- PSP 14.x fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250115151602.210704-1-alexander.deucher@amd.com
|
|
syz reports an out of bounds read:
==================================================================
BUG: KASAN: slab-out-of-bounds in ocfs2_match fs/ocfs2/dir.c:334
[inline]
BUG: KASAN: slab-out-of-bounds in ocfs2_search_dirblock+0x283/0x6e0
fs/ocfs2/dir.c:367
Read of size 1 at addr ffff88804d8b9982 by task syz-executor.2/14802
CPU: 0 UID: 0 PID: 14802 Comm: syz-executor.2 Not tainted 6.13.0-rc4 #2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1
04/01/2014
Sched_ext: serialise (enabled+all), task: runnable_at=-10ms
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x229/0x350 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0x164/0x530 mm/kasan/report.c:489
kasan_report+0x147/0x180 mm/kasan/report.c:602
ocfs2_match fs/ocfs2/dir.c:334 [inline]
ocfs2_search_dirblock+0x283/0x6e0 fs/ocfs2/dir.c:367
ocfs2_find_entry_id fs/ocfs2/dir.c:414 [inline]
ocfs2_find_entry+0x1143/0x2db0 fs/ocfs2/dir.c:1078
ocfs2_find_files_on_disk+0x18e/0x530 fs/ocfs2/dir.c:1981
ocfs2_lookup_ino_from_name+0xb6/0x110 fs/ocfs2/dir.c:2003
ocfs2_lookup+0x30a/0xd40 fs/ocfs2/namei.c:122
lookup_open fs/namei.c:3627 [inline]
open_last_lookups fs/namei.c:3748 [inline]
path_openat+0x145a/0x3870 fs/namei.c:3984
do_filp_open+0xe9/0x1c0 fs/namei.c:4014
do_sys_openat2+0x135/0x1d0 fs/open.c:1402
do_sys_open fs/open.c:1417 [inline]
__do_sys_openat fs/open.c:1433 [inline]
__se_sys_openat fs/open.c:1428 [inline]
__x64_sys_openat+0x15d/0x1c0 fs/open.c:1428
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf6/0x210 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f01076903ad
Code: c3 e8 a7 2b 00 00 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 89 f8 48 89
f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01
f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f01084acfc8 EFLAGS: 00000246 ORIG_RAX: 0000000000000101
RAX: ffffffffffffffda RBX: 00007f01077cbf80 RCX: 00007f01076903ad
RDX: 0000000000105042 RSI: 0000000020000080 RDI: ffffffffffffff9c
RBP: 00007f01077cbf80 R08: 0000000000000000 R09: 0000000000000000
R10: 00000000000001ff R11: 0000000000000246 R12: 0000000000000000
R13: 00007f01077cbf80 R14: 00007f010764fc90 R15: 00007f010848d000
</TASK>
==================================================================
And a general protection fault in ocfs2_prepare_dir_for_insert:
==================================================================
loop0: detected capacity change from 0 to 32768
JBD2: Ignoring recovery information on journal
ocfs2: Mounting device (7,0) on (node local, slot 0) with ordered data
mode.
Oops: general protection fault, probably for non-canonical address
0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
CPU: 0 UID: 0 PID: 5096 Comm: syz-executor792 Not tainted
6.11.0-rc4-syzkaller-00002-gb0da640826ba #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS
1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
RIP: 0010:ocfs2_find_dir_space_id fs/ocfs2/dir.c:3406 [inline]
RIP: 0010:ocfs2_prepare_dir_for_insert+0x3309/0x5c70 fs/ocfs2/dir.c:4280
Code: 00 00 e8 2a 25 13 fe e9 ba 06 00 00 e8 20 25 13 fe e9 4f 01 00 00
e8 16 25 13 fe 49 8d 7f 08 49 8d 5f 09 48 89 f8 48 c1 e8 03 <42> 0f b6
04 20 84 c0 0f 85 bd 23 00 00 48 89 d8 48 c1 e8 03 42 0f
RSP: 0018:ffffc9000af9f020 EFLAGS: 00010202
RAX: 0000000000000001 RBX: 0000000000000009 RCX: ffff88801e27a440
RDX: 0000000000000000 RSI: 0000000000000400 RDI: 0000000000000008
RBP: ffffc9000af9f830 R08: ffffffff8380395b R09: ffffffff838090a7
R10: 0000000000000002 R11: ffff88801e27a440 R12: dffffc0000000000
R13: ffff88803c660878 R14: f700000000000088 R15: 0000000000000000
FS: 000055555a677380(0000) GS:ffff888020800000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000560bce569178 CR3: 000000001de5a000 CR4: 0000000000350ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
ocfs2_mknod+0xcaf/0x2b40 fs/ocfs2/namei.c:292
vfs_mknod+0x36d/0x3b0 fs/namei.c:4088
do_mknodat+0x3ec/0x5b0
__do_sys_mknodat fs/namei.c:4166 [inline]
__se_sys_mknodat fs/namei.c:4163 [inline]
__x64_sys_mknodat+0xa7/0xc0 fs/namei.c:4163
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f2dafda3a99
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 f1 17 00 00 90 48 89
f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08
0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8
64 89 01 48
RSP: 002b:00007ffe336a6658 EFLAGS: 00000246 ORIG_RAX:
0000000000000103
RAX: ffffffffffffffda RBX: 0000000000000000 RCX:
00007f2dafda3a99
RDX: 00000000000021c0 RSI: 0000000020000040 RDI:
00000000ffffff9c
RBP: 00007f2dafe1b5f0 R08: 0000000000004480 R09:
000055555a6784c0
R10: 0000000000000103 R11: 0000000000000246 R12:
00007ffe336a6680
R13: 00007ffe336a68a8 R14: 431bde82d7b634db R15:
00007f2dafdec03b
</TASK>
==================================================================
The two reports are all caused invalid negative i_size of dir inode. For
ocfs2, dir_inode can't be negative or zero.
Here add a check in which is called by ocfs2_check_dir_for_entry(). It
fixes the second report as ocfs2_check_dir_for_entry() must be called
before ocfs2_prepare_dir_for_insert(). Also set a up limit for dir with
OCFS2_INLINE_DATA_FL. The i_size can't be great than blocksize.
Link: https://lkml.kernel.org/r/20250106140640.92260-1-glass.su@suse.com
Reported-by: Jiacheng Xu <stitch@zju.edu.cn>
Link: https://lore.kernel.org/ocfs2-devel/17a04f01.1ae74.19436d003fc.Coremail.stitch@zju.edu.cn/T/#u
Reported-by: syzbot+5a64828fcc4c2ad9b04f@syzkaller.appspotmail.com
Link: https://lore.kernel.org/all/0000000000005894f3062018caf1@google.com/T/
Signed-off-by: Su Yue <glass.su@suse.com>
Reviewed-by: Heming Zhao <heming.zhao@suse.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Map old gmail + name to my current full name and email.
Link: https://lkml.kernel.org/r/xbfkmvmp4wyxrvlan57bjnul5icrwfyt67vnhhw2cyr5rzbnee@mfvihhd6s7l5
Signed-off-by: Ethan Carter Edwards <ethan@ethancedwards.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In zswap_cpu_comp_prepare(), allocations are made and assigned to various
members of acomp_ctx under acomp_ctx->mutex. However, allocations may
recurse into zswap through reclaim, trying to acquire the same mutex and
deadlocking.
Move the allocations before the mutex critical section. Only the
initialization of acomp_ctx needs to be done with the mutex held.
Link: https://lkml.kernel.org/r/20250113214458.2123410-1-yosryahmed@google.com
Fixes: 12dcb0ef5406 ("mm: zswap: properly synchronize freeing resources during CPU hotunplug")
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
syzkaller reported such a BUG_ON():
------------[ cut here ]------------
kernel BUG at mm/khugepaged.c:1835!
Internal error: Oops - BUG: 00000000f2000800 [#1] SMP
...
CPU: 6 UID: 0 PID: 8009 Comm: syz.15.106 Kdump: loaded Tainted: G W 6.13.0-rc6 #22
Tainted: [W]=WARN
Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
pstate: 00400005 (nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : collapse_file+0xa44/0x1400
lr : collapse_file+0x88/0x1400
sp : ffff80008afe3a60
...
Call trace:
collapse_file+0xa44/0x1400 (P)
hpage_collapse_scan_file+0x278/0x400
madvise_collapse+0x1bc/0x678
madvise_vma_behavior+0x32c/0x448
madvise_walk_vmas.constprop.0+0xbc/0x140
do_madvise.part.0+0xdc/0x2c8
__arm64_sys_madvise+0x68/0x88
invoke_syscall+0x50/0x120
el0_svc_common.constprop.0+0xc8/0xf0
do_el0_svc+0x24/0x38
el0_svc+0x34/0x128
el0t_64_sync_handler+0xc8/0xd0
el0t_64_sync+0x190/0x198
This indicates that the pgoff is unaligned. After analysis, I confirm the
vma is mapped to /dev/zero. Such a vma certainly has vm_file, but it is
set to anonymous by mmap_zero(). So even if it's mmapped by 2m-unaligned,
it can pass the check in thp_vma_allowable_order() as it is an
anonymous-mmap, but then be collapsed as a file-mmap.
It seems the problem has existed for a long time, but actually, since we
have khugepaged_max_ptes_none check before, we will skip collapse it as it
is /dev/zero and so has no present page. But commit d8ea7cc8547c limit
the check for only khugepaged, so the BUG_ON() can be triggered by
madvise_collapse().
Add vma_is_anonymous() check to make such vma be processed by
hpage_collapse_scan_pmd().
Link: https://lkml.kernel.org/r/20250111034511.2223353-1-liushixin2@huawei.com
Fixes: d8ea7cc8547c ("mm/khugepaged: add flag to predicate khugepaged-only behavior")
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Reviewed-by: Yang Shi <yang@os.amperecomputing.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Chengming Zhou <chengming.zhou@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Mattew Wilcox <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nanyong Sun <sunnanyong@huawei.com>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Fixes an issue where the use of an unsigned data type in
`shmem_parse_opt_casefold()` caused incorrect evaluation of negative
conditions.
Link: https://lkml.kernel.org/r/20250111-unsignedcompare1601569-v3-1-c861b4221831@gmail.com
Fixes: 58e55efd6c72 ("tmpfs: Add casefold lookup support")
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Reviewed-by: Gabriel Krisman Bertazi <gabriel@krisman.be>
Signed-off-by: Karan Sanghavi <karansanghvi98@gmail.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Hugh Dickens <hughd@google.com>
Cc: Shuah khan <skhan@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When memory allocation profiling is disabled, there is no need to swap
allocation tags during migration. Skip it to avoid unnecessary overhead.
Once I added these checks, the overhead of the mode when memory profiling
is enabled but turned off went down by about 50%.
Link: https://lkml.kernel.org/r/20241226211639.1357704-2-surenb@google.com
Fixes: e0a955bf7f61 ("mm/codetag: add pgalloc_tag_copy()")
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Cc: David Wang <00107082@163.com>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Zhenhua Huang <quic_zhenhuah@quicinc.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
adjust_managed_page_count
In the kernel, the zone's lowmem_reserve and _watermark, and the global
variable 'totalreserve_pages' depend on the value of managed_pages, but
after running adjust_managed_page_count, these values aren't updated,
which causes some problems.
For example, in a system with six 1GB large pages, we found that the value
of protection in zoneinfo (zone->lowmem_reserve), is not right. Its value
seems to be calculated from the initial managed_pages, but after the
managed_pages changed, was not updated. Only after reading the file
/proc/sys/vm/lowmem_reserve_ratio, updates happen.
read file /proc/sys/vm/lowmem_reserve_ratio:
lowmem_reserve_ratio_sysctl_handler
----setup_per_zone_lowmem_reserve
--------calculate_totalreserve_pages
protection changed after reading file:
[root@test ~]# cat /proc/zoneinfo | grep protection
protection: (0, 2719, 57360, 0)
protection: (0, 0, 54640, 0)
protection: (0, 0, 0, 0)
protection: (0, 0, 0, 0)
[root@test ~]# cat /proc/sys/vm/lowmem_reserve_ratio
256 256 32 0
[root@test ~]# cat /proc/zoneinfo | grep protection
protection: (0, 2735, 63524, 0)
protection: (0, 0, 60788, 0)
protection: (0, 0, 0, 0)
protection: (0, 0, 0, 0)
lowmem_reserve increased also makes the totalreserve_pages increased,
which causes a decrease in available memory. The one above is just a test
machine, and the increase is not significant. On our online machine, the
reserved memory will increase by several GB due to reading this file. It
is clearly unreasonable to cause a sharp drop in available memory just by
reading a file.
In this patch, we update reserve memory when update managed_pages, The
size of reserved memory becomes stable. But it seems that the _watermark
should also be updated along with the managed_pages. We have not done it
because we are unsure if it is reasonable to set the watermark through the
initial managed_pages. If it is not reasonable, we will propose new
patch.
Link: https://lkml.kernel.org/r/20241225021034.45693-1-15645113830zzh@gmail.com
Signed-off-by: zihan zhou <15645113830zzh@gmail.com>
Signed-off-by: yaowenchao <yaowenchao@jd.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
page_pool_ref_netmem() should work with either netmem representation, but
currently it casts to a page with netmem_to_page(), which will fail with
net iovs. Use netmem_get_pp_ref_count_ref() instead.
Fixes: 8ab79ed50cf1 ("page_pool: devmem support")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: David Wei <dw@davidwei.uk>
Link: https://lore.kernel.org/20250108220644.3528845-2-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
drm-misc-fixes for v6.13:
- itee-it6263 error handling fix.
- Fix warn when unloading v3d.
- Fix W=1 build for kunit tests.
- Fix backlight regression for macbooks 5,1 in nouveau.
- Handle YCbCr420 better in bridge code, with tests.
- Fix cross-device fence handling in nouveau.
- Fix BO reservation handling in vmwgfx.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a89adcd5-2042-4e7f-93f4-2b299bb1ef17@linux.intel.com
|
|
When shutting down the server in cifs_put_tcp_session(), cifsd thread
might be reconnecting to multiple DFS targets before it realizes it
should exit the loop, so @server->hostname can't be freed as long as
cifsd thread isn't done. Otherwise the following can happen:
RIP: 0010:__slab_free+0x223/0x3c0
Code: 5e 41 5f c3 cc cc cc cc 4c 89 de 4c 89 cf 44 89 44 24 08 4c 89
1c 24 e8 fb cf 8e 00 44 8b 44 24 08 4c 8b 1c 24 e9 5f fe ff ff <0f>
0b 41 f7 45 08 00 0d 21 00 0f 85 2d ff ff ff e9 1f ff ff ff 80
RSP: 0018:ffffb26180dbfd08 EFLAGS: 00010246
RAX: ffff8ea34728e510 RBX: ffff8ea34728e500 RCX: 0000000000800068
RDX: 0000000000800068 RSI: 0000000000000000 RDI: ffff8ea340042400
RBP: ffffe112041ca380 R08: 0000000000000001 R09: 0000000000000000
R10: 6170732e31303000 R11: 70726f632e786563 R12: ffff8ea34728e500
R13: ffff8ea340042400 R14: ffff8ea34728e500 R15: 0000000000800068
FS: 0000000000000000(0000) GS:ffff8ea66fd80000(0000)
000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffc25376080 CR3: 000000012a2ba001 CR4:
PKRU: 55555554
Call Trace:
<TASK>
? show_trace_log_lvl+0x1c4/0x2df
? show_trace_log_lvl+0x1c4/0x2df
? __reconnect_target_unlocked+0x3e/0x160 [cifs]
? __die_body.cold+0x8/0xd
? die+0x2b/0x50
? do_trap+0xce/0x120
? __slab_free+0x223/0x3c0
? do_error_trap+0x65/0x80
? __slab_free+0x223/0x3c0
? exc_invalid_op+0x4e/0x70
? __slab_free+0x223/0x3c0
? asm_exc_invalid_op+0x16/0x20
? __slab_free+0x223/0x3c0
? extract_hostname+0x5c/0xa0 [cifs]
? extract_hostname+0x5c/0xa0 [cifs]
? __kmalloc+0x4b/0x140
__reconnect_target_unlocked+0x3e/0x160 [cifs]
reconnect_dfs_server+0x145/0x430 [cifs]
cifs_handle_standard+0x1ad/0x1d0 [cifs]
cifs_demultiplex_thread+0x592/0x730 [cifs]
? __pfx_cifs_demultiplex_thread+0x10/0x10 [cifs]
kthread+0xdd/0x100
? __pfx_kthread+0x10/0x10
ret_from_fork+0x29/0x50
</TASK>
Fixes: 7be3248f3139 ("cifs: To match file servers, make sure the server hostname matches")
Reported-by: Jay Shin <jaeshin@redhat.com>
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Fix use of DIV_ROUND_CLOSEST where a possibly negative value is divided
by an unsigned type by casting the unsigned type to the signed type of
the same size (st->r_sense_uohm[channel] has type of u32).
The docs on the DIV_ROUND_CLOSEST macro explain that dividing a negative
value by an unsigned type is undefined behavior. The actual behavior is
that it converts both values to unsigned before doing the division, for
example:
int ret = DIV_ROUND_CLOSEST(-100, 3U);
results in ret == 1431655732 instead of -33.
Fixes: 2b9ea4262ae9 ("hwmon: Add driver for ltc2991")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://lore.kernel.org/r/20250115-hwmon-ltc2991-fix-div-round-closest-v1-1-b4929667e457@baylibre.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
In 4.19, before the switch to linkmode bitmaps, PHY_GBIT_FEATURES
included feature bits for aneg and TP/MII ports.
SUPPORTED_TP | \
SUPPORTED_MII)
SUPPORTED_10baseT_Full)
SUPPORTED_100baseT_Full)
SUPPORTED_1000baseT_Full)
PHY_100BT_FEATURES | \
PHY_DEFAULT_FEATURES)
PHY_1000BT_FEATURES)
Referenced commit expanded PHY_GBIT_FEATURES, silently removing
PHY_DEFAULT_FEATURES. The removed part can be re-added by using
the new PHY_GBIT_FEATURES definition.
Not clear to me is why nobody seems to have noticed this issue.
I stumbled across this when checking what it takes to make
phy_10_100_features_array et al private to phylib.
Fixes: d0939c26c53a ("net: ethernet: xgbe: expand PHY_GBIT_FEAUTRES")
Cc: stable@vger.kernel.org
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/46521973-7738-4157-9f5e-0bb6f694acba@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
xpcs_config_2500basex() sets DW_VR_MII_DIG_CTRL1_2G5_EN, but
xpcs_config_aneg_c37_sgmii() never unsets it. So, on a protocol change
from 2500base-x to sgmii, the DW_VR_MII_DIG_CTRL1_2G5_EN bit will remain
set.
Fixes: f27abde3042a ("net: pcs: add 2500BASEX support for Intel mGbE controller")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20250114164721.2879380-2-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
w/o inband
On a port with SGMII fixed-link at SPEED_1000, DW_VR_MII_DIG_CTRL1 gets
set to 0x2404. This is incorrect, because bit 2 (DW_VR_MII_DIG_CTRL1_2G5_EN)
is set.
It comes from the previous write to DW_VR_MII_AN_CTRL, because the "val"
variable is reused and is dirty. Actually, its value is 0x4, aka
FIELD_PREP(DW_VR_MII_PCS_MODE_MASK, DW_VR_MII_PCS_MODE_C37_SGMII).
Resolve the issue by clearing "val" to 0 when writing to a new register.
After the fix, the register value is 0x2400.
Prior to the blamed commit, when the read-modify-write was open-coded,
the code saved the content of the DW_VR_MII_DIG_CTRL1 register in the
"ret" variable.
Fixes: ce8d6081fcf4 ("net: pcs: xpcs: add _modify() accessors")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20250114164721.2879380-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This backend requests a NACK from the controller driver when it detects
an error. If that request gets ignored from some reason, subsequent
accesses will wrongly be handled OK. To fix this, an error now changes
the state machine, so the backend will report NACK until a STOP
condition has been detected. This make the driver more robust against
controllers which will sadly apply the NACK not to the current byte but
the next one.
Fixes: a8335c64c5f0 ("i2c: add slave testunit driver")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
When this controller is a target, the NACK handling had two issues.
First, the return value from the backend was not checked on the initial
WRITE_REQUESTED. So, the driver missed to send a NACK in this case.
Also, the NACK always arrives one byte late on the bus, even in the
WRITE_RECEIVED case. This seems to be a HW issue. We should then not
rely on the backend to correctly NACK the superfluous byte as well. Fix
both issues by introducing a flag which gets set whenever the backend
requests a NACK and keep sending it until we get a STOP condition.
Fixes: de20d1857dd6 ("i2c: rcar: add slave support")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
Two characters flipped, fix them.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
When misconfigured, the initial setup of the current mux channel can
fail, too. It must be checked as well.
Fixes: 50a5ba876908 ("i2c: mux: demux-pinctrl: add driver")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
This reverts commit 98d1fb94ce75f39febd456d6d3cbbe58b6678795.
The commit uses data nbits instead of addr nbits for dummy phase. This
causes a regression for all boards where spi-tx-bus-width is smaller
than spi-rx-bus-width. It is a common pattern for boards to have
spi-tx-bus-width == 1 and spi-rx-bus-width > 1. The regression causes
all reads with a dummy phase to become unavailable for such boards,
leading to a usually slower 0-dummy-cycle read being selected.
Most controllers' supports_op hooks call spi_mem_default_supports_op().
In spi_mem_default_supports_op(), spi_mem_check_buswidth() is called to
check if the buswidths for the op can actually be supported by the
board's wiring. This wiring information comes from (among other things)
the spi-{tx,rx}-bus-width DT properties. Based on these properties,
SPI_TX_* or SPI_RX_* flags are set by of_spi_parse_dt().
spi_mem_check_buswidth() then uses these flags to make the decision
whether an op can be supported by the board's wiring (in a way,
indirectly checking against spi-{rx,tx}-bus-width).
Now the tricky bit here is that spi_mem_check_buswidth() does:
if (op->dummy.nbytes &&
spi_check_buswidth_req(mem, op->dummy.buswidth, true))
return false;
The true argument to spi_check_buswidth_req() means the op is treated as
a TX op. For a board that has say 1-bit TX and 4-bit RX, a 4-bit dummy
TX is considered as unsupported, and the op gets rejected.
The commit being reverted uses the data buswidth for dummy buswidth. So
for reads, the RX buswidth gets used for the dummy phase, uncovering
this issue. In reality, a dummy phase is neither RX nor TX. As the name
suggests, these are just dummy cycles that send or receive no data, and
thus don't really need to have any buswidth at all.
Ideally, dummy phases should not be checked against the board's wiring
capabilities at all, and should only be sanity-checked for having a sane
buswidth value. Since we are now at rc7 and such a change might
introduce many unexpected bugs, revert the commit for now. It can be
sent out later along with the spi_mem_check_buswidth() fix.
Fixes: 98d1fb94ce75 ("mtd: spi-nor: core: replace dummy buswidth from addr to data")
Reported-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Closes: https://lore.kernel.org/linux-mtd/3342163.44csPzL39Z@steina-w/
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
syzbot triggered the warning in posixtimer_send_sigqueue(), which warns
about a non-ignored signal being already queued on the ignored list.
The warning is actually bogus, as the following sequence causes this:
signal($SIG, SIGIGN);
timer_settime(...); // arm periodic timer
timer fires, signal is ignored and queued on ignored list
sigprocmask(SIG_BLOCK, ...); // block the signal
timer_settime(...); // re-arm periodic timer
timer fires, signal is not ignored because it is blocked
---> Warning triggers as signal is on the ignored list
Ideally timer_settime() could remove the signal, but that's racy and
incomplete vs. other scenarios and requires a full reevaluation of the
pending signal list.
Instead of adding more complexity, handle it gracefully by removing the
warning and requeueing the signal to the pending list. That's correct
versus:
1) sig[timed]wait() as that does not check for SIGIGN and only relies on
dequeue_signal() -> posixtimers_deliver_signal() to check whether the
pending signal is still valid.
2) Unblocking of the signal.
- If the unblocking happens before SIGIGN is replaced by a signal
handler, then the timer is rearmed in dequeue_signal(), but
get_signal() will ignore it. The next timer expiry will move it back
to the ignored list.
- If SIGIGN was replaced before unblocking, then the signal will be
delivered and a subsequent expiry will queue a signal on the pending
list again.
There is a related scenario to trigger the complementary warning in the
signal ignored path, which does not expect the signal to be on the pending
list when it is ignored. That can be triggered even before the above change
via:
task1 task2
signal($SIG, SIGIGN);
sigprocmask(SIG_BLOCK, ...);
timer_create(); // Signal target is task2
timer_settime(...); // arm periodic timer
timer fires, signal is not ignored because it is blocked
and queued on the pending list of task2
syscall()
// Sets the pending flag
sigprocmask(SIG_UNBLOCK, ...);
-> preemption, task2 cannot dequeue the signal
timer_settime(...); // re-arm periodic timer
timer fires, signal is ignored
---> Warning triggers as signal is on task2's pending list
and the thread group is not exiting
Consequently, remove that warning too and just keep the signal on the
pending list.
The following attempt to deliver the signal on return to user space of
task2 will ignore the signal and a subsequent expiry will bring it back to
the ignored list, if it did not get blocked or un-ignored before that.
Fixes: df7a996b4dab ("signal: Queue ignored posixtimers on ignore list")
Reported-by: syzbot+3c2e3cc60665d71de2f7@syzkaller.appspotmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/all/87ikqhcnjn.ffs@tglx
|
|
The SQ and CQ ring heads are read twice - once for verifying that it's
within bounds, and once inside the loops copying SQE and CQE entries.
This is technically incorrect, in case the values could get modified
in between verifying them and using them in the copy loop. While this
won't lead to anything truly nefarious, it may cause longer loop times
for the copies than expected.
Read the ring head values once, and use the verified value in the copy
loops.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
It can be a bit hard to tell which parts of io_register_resize_rings()
are operating on shared memory, and which ones are not. And anything
reading or writing to those regions should really use the read/write
once primitives.
Hence add those, ensuring sanity in how this memory is accessed, and
helping document the shared nature of it.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into arm/fixes
TI SoC driver updates for v6.14
- Build fixup when CONFIG_TI_PRUSS is disabled.
|
|
Normally the kernel would not expect an application to modify any of
the data shared with the kernel during a resize operation, but of
course the kernel cannot always assume good intent on behalf of the
application.
As part of resizing the rings, existing SQEs and CQEs are copied over
to the new storage. Resizing uses the masks in the newly allocated
shared storage to index the arrays, however it's possible that malicious
userspace could modify these after they have been sanity checked.
Use the validated and locally stored CQ and SQ ring sizing for masking
to ensure the values are both stable and valid.
Fixes: 79cfe9e59c2a ("io_uring/register: add IORING_REGISTER_RESIZE_RINGS")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There's at least one drive (MaxDigitalData OOS14000G) such that if it
receives a large amount of I/O while entering an idle power state will
first exit idle before responding, including causing SMART temperature
requests to be delayed.
This causes the drivetemp request to exceed its timeout of 1 second.
Signed-off-by: Russell Harmon <russ@har.mn>
Link: https://lore.kernel.org/r/20250115131340.3178988-1-russ@har.mn
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
read_domain_devices().
After commit fabb1f813ec0 ("hwmon: (acpi_power_meter) Fix fail to load
module on platform without _PMD method"),
the acpi_power_meter driver fails to load if the platform has _PMD method.
To address this, add a check for successful read_domain_devices().
Tested on Nvidia Grace machine.
Fixes: fabb1f813ec0 ("hwmon: (acpi_power_meter) Fix fail to load module on platform without _PMD method")
Signed-off-by: Kazuhiro Abe <fj1078ii@aa.jp.fujitsu.com>
Link: https://lore.kernel.org/r/20250115073532.3211000-1-fj1078ii@aa.jp.fujitsu.com
[groeck: Dropped unnecessary () from expression]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
arm/fixes
Reset controller fixes for v6.13
* Fix rzg2l-usb-vbus-regulator lookup by assigning the proper of node
to the allocated platform device in the rzg2l-usbphy-ctrl driver.
* tag 'reset-fixes-for-v6.13' of git://git.pengutronix.de/pza/linux:
reset: rzg2l-usbphy-ctrl: Assign proper of node to the allocated device
Link: https://lore.kernel.org/r/20250113163642.1757160-1-p.zabel@pengutronix.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add missing VISACTL mux registers required for some OA
config's (e.g. RenderPipeCtrl).
Fixes: cdf02fe1a94a ("drm/xe/oa/uapi: Add/remove OA config perf ops")
Cc: stable@vger.kernel.org
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250111021539.2920346-1-ashutosh.dixit@intel.com
(cherry picked from commit c26f22dac3449d8a687237cdfc59a6445eb8f75a)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
If ccs_mode is being modified via
/sys/class/drm/cardX/device/tileY/gtY/ccs_mode
the asynchronous reset is triggered and the write returns immediately.
With that some test receive false information about number of CCS engines
or even fail if they proceed without delay after changing the ccs_mode.
Changing the ccs_mode change from async to sync to prevent failures in
tests.
Signed-off-by: Maciej Patelczyk <maciej.patelczyk@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Fixes: f3bc5bb4d53d ("drm/xe: Allow userspace to configure CCS mode")
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241211111727.1481476-3-maciej.patelczyk@intel.com
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
(cherry picked from commit 480fb9806e2e073532f7786166287114c696b340)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
Add synchronous version gt reset as there are few places where it
is expected.
Also add a wait helper to wait until gt reset is done.
Signed-off-by: Maciej Patelczyk <maciej.patelczyk@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Fixes: f3bc5bb4d53d ("drm/xe: Allow userspace to configure CCS mode")
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241211111727.1481476-2-maciej.patelczyk@intel.com
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
(cherry picked from commit 155c77f45f63dd58a37eeb0896b0b140ab785836)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
The guc_mmio_reg interface supports steering, but it is currently not
implemented. This will allow the GuC to control steering of MMIO
registers after save-restore and avoid reading from fused off MCR
register instances.
Fixes: 9c57bc08652a ("drm/xe/lnl: Drop force_probe requirement")
Signed-off-by: Jesus Narvaez <jesus.narvaez@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241212190100.3768068-1-jesus.narvaez@intel.com
(cherry picked from commit ee5a1321df90891d59d83b7c9d5b6c5b755d059d)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
platform_irqchip_probe() leaks a OF node when irq_init_cb() fails. Fix it
by declaring par_np with the __free(device_node) cleanup construct.
This bug was found by an experimental static analysis tool that I am
developing.
Fixes: f8410e626569 ("irqchip: Add IRQCHIP_PLATFORM_DRIVER_BEGIN/END and IRQCHIP_MATCH helper macros")
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20241215033945.3414223-1-joe@pf.is.s.u-tokyo.ac.jp
|
|
Because of patch[1] the graft behaviour changed
So the command:
tcq replace parent 100:1 handle 204:
Is no longer valid and will not delete 100:4 added by command:
tcq replace parent 100:4 handle 204: pfifo_fast
So to maintain the original behaviour, this patch manually deletes 100:4
and grafts 100:1
Note: This change will also work fine without [1]
[1] https://lore.kernel.org/netdev/20250111151455.75480-1-jhs@mojatatu.com/T/#u
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Some boards with Allwinner SoCs connect the PMIC's IRQ pin to the SoC's NMI
pin instead of a normal GPIO. Since the power key is connected to the PMIC,
and people expect to wake up a suspended system via this key, the NMI IRQ
controller must stay alive when the system goes into suspend.
Add the SKIP_WAKE flag to prevent the sunxi NMI controller from going to
sleep, so that the power key can wake up those systems.
[ tglx: Fixed up coding style ]
Signed-off-by: Philippe Simons <simons.philippe@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250112123402.388520-1-simons.philippe@gmail.com
|
|
The following call-chain leads to enabling interrupts in a nested interrupt
disabled section:
irq_set_vcpu_affinity()
irq_get_desc_lock()
raw_spin_lock_irqsave() <--- Disable interrupts
its_irq_set_vcpu_affinity()
guard(raw_spinlock_irq) <--- Enables interrupts when leaving the guard()
irq_put_desc_unlock() <--- Warns because interrupts are enabled
This was broken in commit b97e8a2f7130, which replaced the original
raw_spin_[un]lock() pair with guard(raw_spinlock_irq).
Fix the issue by using guard(raw_spinlock).
[ tglx: Massaged change log ]
Fixes: b97e8a2f7130 ("irqchip/gic-v3-its: Fix potential race condition in its_vlpi_prop_update()")
Signed-off-by: Tomas Krcka <krckatom@amazon.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20241230150825.62894-1-krckatom@amazon.de
|
|
When a CPU attempts to enter low power mode, it disables the redistributor
and Group 1 interrupts and reinitializes the system registers upon wakeup.
If the transition into low power mode fails, then the CPU_PM framework
invokes the PM notifier callback with CPU_PM_ENTER_FAILED to allow the
drivers to undo the state changes.
The GIC V3 driver ignores CPU_PM_ENTER_FAILED, which leaves the GIC in
disabled state.
Handle CPU_PM_ENTER_FAILED in the same way as CPU_PM_EXIT to restore normal
operation.
[ tglx: Massage change log, add Fixes tag ]
Fixes: 3708d52fc6bb ("irqchip: gic-v3: Implement CPU PM notifier")
Signed-off-by: Yogesh Lal <quic_ylal@quicinc.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20241220093907.2747601-1-quic_ylal@quicinc.com
|
|
If devm_i2c_new_dummy_device() fails then we were supposed to return an
error code, but instead the function continues and will crash on the next
line. Add the missing return statement.
Fixes: 049723628716 ("drm/bridge: Add ITE IT6263 LVDS to HDMI converter")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Liu Ying <victor.liu@nxp.com>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Link: https://patchwork.freedesktop.org/patch/msgid/804a758b-f2e7-4116-b72d-29bc8905beed@stanley.mountain
|
|
The fec_enet_update_cbd function calls page_pool_dev_alloc_pages but did
not handle the case when it returned NULL. There was a WARN_ON(!new_page)
but it would still proceed to use the NULL pointer and then crash.
This case does seem somewhat rare but when the system is under memory
pressure it can happen. One case where I can duplicate this with some
frequency is when writing over a smbd share to a SATA HDD attached to an
imx6q.
Setting /proc/sys/vm/min_free_kbytes to higher values also seems to solve
the problem for my test case. But it still seems wrong that the fec driver
ignores the memory allocation error and can crash.
This commit handles the allocation error by dropping the current packet.
Fixes: 95698ff6177b5 ("net: fec: using page pool to manage RX buffers")
Signed-off-by: Kevin Groeneveld <kgroeneveld@lenbrook.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20250113154846.1765414-1-kgroeneveld@lenbrook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When __netpoll_setup() is called directly, instead of through
netpoll_setup(), the np->skb_pool list head isn't initialized.
If skb_pool_flush() is later called, then we hit a NULL pointer
in skb_queue_purge_reason(). This can be seen with this repro,
when CONFIG_NETCONSOLE is enabled as a module:
ip tuntap add mode tap tap0
ip link add name br0 type bridge
ip link set dev tap0 master br0
modprobe netconsole netconsole=4444@10.0.0.1/br0,9353@10.0.0.2/
rmmod netconsole
The backtrace is:
BUG: kernel NULL pointer dereference, address: 0000000000000008
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
... ... ...
Call Trace:
<TASK>
__netpoll_free+0xa5/0xf0
br_netpoll_cleanup+0x43/0x50 [bridge]
do_netpoll_cleanup+0x43/0xc0
netconsole_netdev_event+0x1e3/0x300 [netconsole]
unregister_netdevice_notifier+0xd9/0x150
cleanup_module+0x45/0x920 [netconsole]
__se_sys_delete_module+0x205/0x290
do_syscall_64+0x70/0x150
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Move the skb_pool list setup and initial skb fill into __netpoll_setup().
Fixes: 221a9c1df790 ("net: netpoll: Individualize the skb pool")
Signed-off-by: John Sperbeck <jsperbeck@google.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250114011354.2096812-1-jsperbeck@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If coalesce_count is greater than 255 it will not fit in the register and
will overflow. This can be reproduced by running
# ethtool -C ethX rx-frames 256
which will result in a timeout of 0us instead. Fix this by checking for
invalid values and reporting an error.
Fixes: 8a3b7a252dca ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Link: https://patch.msgid.link/20250113163001.2335235-1-sean.anderson@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix several issues with division of negative numbers in the tmp513
driver.
The docs on the DIV_ROUND_CLOSEST macro explain that dividing a negative
value by an unsigned type is undefined behavior. The driver was doing
this in several places, i.e. data->shunt_uohms has type of u32. The
actual "undefined" behavior is that it converts both values to unsigned
before doing the division, for example:
int ret = DIV_ROUND_CLOSEST(-100, 3U);
results in ret == 1431655732 instead of -33.
Furthermore the MILLI macro has a type of unsigned long. Multiplying a
signed long by an unsigned long results in an unsigned long.
So, we need to cast both MILLI and data data->shunt_uohms to long when
using the DIV_ROUND_CLOSEST macro.
Fixes: f07f9d2467f4 ("hwmon: (tmp513) Use SI constants from units.h")
Fixes: 59dfa75e5d82 ("hwmon: Add driver for Texas Instruments TMP512/513 sensor chips.")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://lore.kernel.org/r/20250114-fix-si-prefix-macro-sign-bugs-v1-1-696fd8d10f00@baylibre.com
[groeck: Drop some continuation lines]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The "sizeof(struct cmsg_bpf_event) + pkt_size + data_size" math could
potentially have an integer wrapping bug on 32bit systems. Check for
this and return an error.
Fixes: 9816dd35ecec ("nfp: bpf: perf event output helpers support")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/6074805b-e78d-4b8a-bf05-e929b5377c28@stanley.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The FRED RSP0 MSR is only used for delivering events when running
userspace. Linux leverages this property to reduce expensive MSR
writes and optimize context switches. The kernel only writes the
MSR when about to run userspace *and* when the MSR has actually
changed since the last time userspace ran.
This optimization is implemented by maintaining a per-CPU cache of
FRED RSP0 and then checking that against the value for the top of
current task stack before running userspace.
However cpu_init_fred_exceptions() writes the MSR without updating
the per-CPU cache. This means that the kernel might return to
userspace with MSR_IA32_FRED_RSP0==0 when it needed to point to the
top of current task stack. This would induce a double fault (#DF),
which is bad.
A context switch after cpu_init_fred_exceptions() can paper over
the issue since it updates the cached value. That evidently
happens most of the time explaining how this bug got through.
Fix the bug through resynchronizing the FRED RSP0 MSR with its
per-CPU cache in cpu_init_fred_exceptions().
Fixes: fe85ee391966 ("x86/entry: Set FRED RSP0 on return to userspace instead of context switch")
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc:stable@vger.kernel.org
Link: https://lore.kernel.org/all/20250110174639.1250829-1-xin%40zytor.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull seccomp fix from Kees Cook:
"Fix a randconfig failure:
- Unconditionally define stub for !CONFIG_SECCOMP (Linus Walleij)"
* tag 'seccomp-v6.13-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
seccomp: Stub for !CONFIG_SECCOMP
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Fix E825 initialization
Grzegorz Nitka says:
E825 products have incorrect initialization procedure, which may lead to
initialization failures and register values.
Fix E825 products initialization by adding correct sync delay, checking
the PHY revision only for current PHY and adding proper destination
device when reading port/quad.
In addition, E825 uses PF ID for indexing per PF registers and as
a primary PHY lane number, which is incorrect.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ice: Add correct PHY lane assignment
ice: Fix ETH56G FC-FEC Rx offset value
ice: Fix quad registers read on E825
ice: Fix E825 initialization
====================
Link: https://patch.msgid.link/20250113182840.3564250-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Matthieu Baerts says:
====================
mptcp: fixes for connect selftest flakes
Last week, Jakub reported [1] that the MPTCP Connect selftest was
unstable. It looked like it started after the introduction of some fixes
[2]. After analysis from Paolo, these patches revealed existing bugs,
that should be fixed by the following patches.
- Patch 1: Make sure ACK are sent when MPTCP-level window re-opens. In
some corner cases, the other peer was not notified when more data
could be sent. A fix for v5.11, but depending on a feature introduced
in v5.19.
- Patch 2: Fix spurious wake-up under memory pressure. In this
situation, the userspace could be invited to read data not being there
yet. A fix for v6.7.
- Patch 3: Fix a false positive error when running the MPTCP Connect
selftest with the "disconnect" cases. The userspace could disconnect
the socket too soon, which would reset (MP_FASTCLOSE) the connection,
interpreted as an error by the test. A fix for v5.17.
Link: https://lore.kernel.org/20250107131845.5e5de3c5@kernel.org [1]
Link: https://lore.kernel.org/20241230-net-mptcp-rbuf-fixes-v1-0-8608af434ceb@kernel.org [2]
====================
Link: https://patch.msgid.link/20250113-net-mptcp-connect-st-flakes-v1-0-0d986ee7b1b6@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
