summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-05-03Bluetooth: qca: fix info leak when fetching board idJohan Hovold
Add the missing sanity check when fetching the board id to avoid leaking slab data when later requesting the firmware. Fixes: a7f8dedb4be2 ("Bluetooth: qca: add support for QCA2066") Cc: stable@vger.kernel.org # 6.7 Cc: Tim Jiang <quic_tjiang@quicinc.com> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-05-03Bluetooth: qca: fix info leak when fetching fw build idJohan Hovold
Add the missing sanity checks and move the 255-byte build-id buffer off the stack to avoid leaking stack data through debugfs in case the build-info reply is malformed. Fixes: c0187b0bd3e9 ("Bluetooth: btqca: Add support to read FW build version for WCN3991 BTSoC") Cc: stable@vger.kernel.org # 5.12 Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-05-03Bluetooth: qca: generalise device address checkJohan Hovold
The default device address apparently comes from the NVM configuration file and can differ quite a bit between controllers. Store the default address when parsing the configuration file and use it to determine whether the controller has been provisioned with an address. This makes sure that devices without a unique address start as unconfigured unless a valid address has been provided in the devicetree. Fixes: 32868e126c78 ("Bluetooth: qca: fix invalid device address check") Cc: stable@vger.kernel.org # 6.5 Cc: Doug Anderson <dianders@chromium.org> Cc: Janaki Ramaiah Thota <quic_janathot@quicinc.com> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Tested-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-05-03Bluetooth: qca: fix NVM configuration parsingJohan Hovold
The NVM configuration files used by WCN3988 and WCN3990/1/8 have two sets of configuration tags that are enclosed by a type-length header of type four which the current parser fails to account for. Instead the driver happily parses random data as if it were valid tags, something which can lead to the configuration data being corrupted if it ever encounters the words 0x0011 or 0x001b. As is clear from commit b63882549b2b ("Bluetooth: btqca: Fix the NVM baudrate tag offcet for wcn3991") the intention has always been to process the configuration data also for WCN3991 and WCN3998 which encodes the baud rate at a different offset. Fix the parser so that it can handle the WCN3xxx configuration files, which has an enclosing type-length header of type four and two sets of TLV tags enclosed by a type-length header of type two and three, respectively. Note that only the first set, which contains the tags the driver is currently looking for, will be parsed for now. With the parser fixed, the software in-band sleep bit will now be set for WCN3991 and WCN3998 (as it is for later controllers) and the default baud rate 3200000 may be updated by the driver also for WCN3xxx controllers. Notably the deep-sleep feature bit is already set by default in all configuration files in linux-firmware. Fixes: 4219d4686875 ("Bluetooth: btqca: Add wcn3990 firmware download support.") Cc: stable@vger.kernel.org # 4.19 Cc: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-05-03Bluetooth: qca: add missing firmware sanity checksJohan Hovold
Add the missing sanity checks when parsing the firmware files before downloading them to avoid accessing and corrupting memory beyond the vmalloced buffer. Fixes: 83e81961ff7e ("Bluetooth: btqca: Introduce generic QCA ROME support") Cc: stable@vger.kernel.org # 4.10 Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-05-03Bluetooth: msft: fix slab-use-after-free in msft_do_close()Sungwoo Kim
Tying the msft->data lifetime to hdev by freeing it in hci_release_dev() to fix the following case: [use] msft_do_close() msft = hdev->msft_data; if (!msft) ...(1) <- passed. return; mutex_lock(&msft->filter_lock); ...(4) <- used after freed. [free] msft_unregister() msft = hdev->msft_data; hdev->msft_data = NULL; ...(2) kfree(msft); ...(3) <- msft is freed. ================================================================== BUG: KASAN: slab-use-after-free in __mutex_lock_common kernel/locking/mutex.c:587 [inline] BUG: KASAN: slab-use-after-free in __mutex_lock+0x8f/0xc30 kernel/locking/mutex.c:752 Read of size 8 at addr ffff888106cbbca8 by task kworker/u5:2/309 Fixes: bf6a4e30ffbd ("Bluetooth: disable advertisement filters during suspend") Signed-off-by: Sungwoo Kim <iam@sung-woo.kim> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-05-03Bluetooth: L2CAP: Fix slab-use-after-free in l2cap_connect()Sungwoo Kim
Extend a critical section to prevent chan from early freeing. Also make the l2cap_connect() return type void. Nothing is using the returned value but it is ugly to return a potentially freed pointer. Making it void will help with backports because earlier kernels did use the return value. Now the compile will break for kernels where this patch is not a complete fix. Call stack summary: [use] l2cap_bredr_sig_cmd l2cap_connect ┌ mutex_lock(&conn->chan_lock); │ chan = pchan->ops->new_connection(pchan); <- alloc chan │ __l2cap_chan_add(conn, chan); │ l2cap_chan_hold(chan); │ list_add(&chan->list, &conn->chan_l); ... (1) └ mutex_unlock(&conn->chan_lock); chan->conf_state ... (4) <- use after free [free] l2cap_conn_del ┌ mutex_lock(&conn->chan_lock); │ foreach chan in conn->chan_l: ... (2) │ l2cap_chan_put(chan); │ l2cap_chan_destroy │ kfree(chan) ... (3) <- chan freed └ mutex_unlock(&conn->chan_lock); ================================================================== BUG: KASAN: slab-use-after-free in instrument_atomic_read include/linux/instrumented.h:68 [inline] BUG: KASAN: slab-use-after-free in _test_bit include/asm-generic/bitops/instrumented-non-atomic.h:141 [inline] BUG: KASAN: slab-use-after-free in l2cap_connect+0xa67/0x11a0 net/bluetooth/l2cap_core.c:4260 Read of size 8 at addr ffff88810bf040a0 by task kworker/u3:1/311 Fixes: 73ffa904b782 ("Bluetooth: Move conf_{req,rsp} stuff to struct l2cap_chan") Signed-off-by: Sungwoo Kim <iam@sung-woo.kim> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-05-03Bluetooth: qca: fix wcn3991 device address checkJohan Hovold
Qualcomm Bluetooth controllers may not have been provisioned with a valid device address and instead end up using the default address 00:00:00:00:5a:ad. This address is now used to determine if a controller has a valid address or if one needs to be provided through devicetree or by user space before the controller can be used. It turns out that the WCN3991 controllers used in Chromium Trogdor machines use a different default address, 39:98:00:00:5a:ad, which also needs to be marked as invalid so that the correct address is fetched from the devicetree. Qualcomm has unfortunately not yet provided any answers as to whether the 39:98 encodes a hardware id and if there are other variants of the default address that needs to be handled by the driver. For now, add the Trogdor WCN3991 default address to the device address check to avoid having these controllers start with the default address instead of their assigned addresses. Fixes: 32868e126c78 ("Bluetooth: qca: fix invalid device address check") Cc: stable@vger.kernel.org # 6.5 Cc: Doug Anderson <dianders@chromium.org> Cc: Janaki Ramaiah Thota <quic_janathot@quicinc.com> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Tested-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-05-03Bluetooth: Fix use-after-free bugs caused by sco_sock_timeoutDuoming Zhou
When the sco connection is established and then, the sco socket is releasing, timeout_work will be scheduled to judge whether the sco disconnection is timeout. The sock will be deallocated later, but it is dereferenced again in sco_sock_timeout. As a result, the use-after-free bugs will happen. The root cause is shown below: Cleanup Thread | Worker Thread sco_sock_release | sco_sock_close | __sco_sock_close | sco_sock_set_timer | schedule_delayed_work | sco_sock_kill | (wait a time) sock_put(sk) //FREE | sco_sock_timeout | sock_hold(sk) //USE The KASAN report triggered by POC is shown below: [ 95.890016] ================================================================== [ 95.890496] BUG: KASAN: slab-use-after-free in sco_sock_timeout+0x5e/0x1c0 [ 95.890755] Write of size 4 at addr ffff88800c388080 by task kworker/0:0/7 ... [ 95.890755] Workqueue: events sco_sock_timeout [ 95.890755] Call Trace: [ 95.890755] <TASK> [ 95.890755] dump_stack_lvl+0x45/0x110 [ 95.890755] print_address_description+0x78/0x390 [ 95.890755] print_report+0x11b/0x250 [ 95.890755] ? __virt_addr_valid+0xbe/0xf0 [ 95.890755] ? sco_sock_timeout+0x5e/0x1c0 [ 95.890755] kasan_report+0x139/0x170 [ 95.890755] ? update_load_avg+0xe5/0x9f0 [ 95.890755] ? sco_sock_timeout+0x5e/0x1c0 [ 95.890755] kasan_check_range+0x2c3/0x2e0 [ 95.890755] sco_sock_timeout+0x5e/0x1c0 [ 95.890755] process_one_work+0x561/0xc50 [ 95.890755] worker_thread+0xab2/0x13c0 [ 95.890755] ? pr_cont_work+0x490/0x490 [ 95.890755] kthread+0x279/0x300 [ 95.890755] ? pr_cont_work+0x490/0x490 [ 95.890755] ? kthread_blkcg+0xa0/0xa0 [ 95.890755] ret_from_fork+0x34/0x60 [ 95.890755] ? kthread_blkcg+0xa0/0xa0 [ 95.890755] ret_from_fork_asm+0x11/0x20 [ 95.890755] </TASK> [ 95.890755] [ 95.890755] Allocated by task 506: [ 95.890755] kasan_save_track+0x3f/0x70 [ 95.890755] __kasan_kmalloc+0x86/0x90 [ 95.890755] __kmalloc+0x17f/0x360 [ 95.890755] sk_prot_alloc+0xe1/0x1a0 [ 95.890755] sk_alloc+0x31/0x4e0 [ 95.890755] bt_sock_alloc+0x2b/0x2a0 [ 95.890755] sco_sock_create+0xad/0x320 [ 95.890755] bt_sock_create+0x145/0x320 [ 95.890755] __sock_create+0x2e1/0x650 [ 95.890755] __sys_socket+0xd0/0x280 [ 95.890755] __x64_sys_socket+0x75/0x80 [ 95.890755] do_syscall_64+0xc4/0x1b0 [ 95.890755] entry_SYSCALL_64_after_hwframe+0x67/0x6f [ 95.890755] [ 95.890755] Freed by task 506: [ 95.890755] kasan_save_track+0x3f/0x70 [ 95.890755] kasan_save_free_info+0x40/0x50 [ 95.890755] poison_slab_object+0x118/0x180 [ 95.890755] __kasan_slab_free+0x12/0x30 [ 95.890755] kfree+0xb2/0x240 [ 95.890755] __sk_destruct+0x317/0x410 [ 95.890755] sco_sock_release+0x232/0x280 [ 95.890755] sock_close+0xb2/0x210 [ 95.890755] __fput+0x37f/0x770 [ 95.890755] task_work_run+0x1ae/0x210 [ 95.890755] get_signal+0xe17/0xf70 [ 95.890755] arch_do_signal_or_restart+0x3f/0x520 [ 95.890755] syscall_exit_to_user_mode+0x55/0x120 [ 95.890755] do_syscall_64+0xd1/0x1b0 [ 95.890755] entry_SYSCALL_64_after_hwframe+0x67/0x6f [ 95.890755] [ 95.890755] The buggy address belongs to the object at ffff88800c388000 [ 95.890755] which belongs to the cache kmalloc-1k of size 1024 [ 95.890755] The buggy address is located 128 bytes inside of [ 95.890755] freed 1024-byte region [ffff88800c388000, ffff88800c388400) [ 95.890755] [ 95.890755] The buggy address belongs to the physical page: [ 95.890755] page: refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88800c38a800 pfn:0xc388 [ 95.890755] head: order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0 [ 95.890755] anon flags: 0x100000000000840(slab|head|node=0|zone=1) [ 95.890755] page_type: 0xffffffff() [ 95.890755] raw: 0100000000000840 ffff888006842dc0 0000000000000000 0000000000000001 [ 95.890755] raw: ffff88800c38a800 000000000010000a 00000001ffffffff 0000000000000000 [ 95.890755] head: 0100000000000840 ffff888006842dc0 0000000000000000 0000000000000001 [ 95.890755] head: ffff88800c38a800 000000000010000a 00000001ffffffff 0000000000000000 [ 95.890755] head: 0100000000000003 ffffea000030e201 ffffea000030e248 00000000ffffffff [ 95.890755] head: 0000000800000000 0000000000000000 00000000ffffffff 0000000000000000 [ 95.890755] page dumped because: kasan: bad access detected [ 95.890755] [ 95.890755] Memory state around the buggy address: [ 95.890755] ffff88800c387f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 95.890755] ffff88800c388000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 95.890755] >ffff88800c388080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 95.890755] ^ [ 95.890755] ffff88800c388100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 95.890755] ffff88800c388180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 95.890755] ================================================================== Fix this problem by adding a check protected by sco_conn_lock to judget whether the conn->hcon is null. Because the conn->hcon will be set to null, when the sock is releasing. Fixes: ba316be1b6a0 ("Bluetooth: schedule SCO timeouts with delayed_work") Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-05-03PCI/ASPM: Clarify that pcie_aspm=off means leave ASPM untouchedBjorn Helgaas
Previously we claimed "pcie_aspm=off" meant that ASPM would be disabled, which is wrong. Correct this to say that with "pcie_aspm=off", Linux doesn't touch any ASPM configuration at all. ASPM may have been enabled by firmware, and that will be left unchanged. See "aspm_support_enabled". Link: https://lore.kernel.org/r/20240429191821.691726-1-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: David E. Box <david.e.box@linux.intel.com>
2024-05-03Merge tag 'block-6.9-20240503' of git://git.kernel.dk/linuxLinus Torvalds
Pull block fixes from Jens Axboe: "Nothing major in here - an nvme pull request with mostly auth/tcp fixes, and a single fix for ublk not setting segment count and size limits" * tag 'block-6.9-20240503' of git://git.kernel.dk/linux: nvme-tcp: strict pdu pacing to avoid send stalls on TLS nvmet: fix nvme status code when namespace is disabled nvmet-tcp: fix possible memory leak when tearing down a controller nvme: cancel pending I/O if nvme controller is in terminal state nvmet-auth: replace pr_debug() with pr_err() to report an error. nvmet-auth: return the error code to the nvmet_auth_host_hash() callers nvme: find numa distance only if controller has valid numa id ublk: remove segment count and size limits nvme: fix warn output about shared namespaces without CONFIG_NVME_MULTIPATH
2024-05-03Merge tag 'sound-6.9-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "As usual in a late stage, we received a fair amount of fixes for ASoC, and it became bigger than wished. But all fixes are rather device- specific, and they look pretty safe to apply. A major par of changes are series of fixes for ASoC meson and SOF drivers as well as for Realtek and Cirrus codecs. In addition, recent emu10k1 regression fixes and usual HD-audio quirks are included" * tag 'sound-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (46 commits) ALSA: hda/realtek: Fix build error without CONFIG_PM ALSA: hda/realtek: Fix conflicting PCI SSID 17aa:386f for Lenovo Legion models ALSA: hda/realtek - Set GPIO3 to default at S4 state for Thinkpad with ALC1318 ALSA: hda: intel-sdw-acpi: fix usage of device_get_named_child_node() ALSA: hda: intel-dsp-config: harden I2C/I2S codec detection ASoC: cs35l56: fix usages of device_get_named_child_node() ASoC: da7219-aad: fix usage of device_get_named_child_node() ASoC: meson: cards: select SND_DYNAMIC_MINORS ASoC: meson: axg-tdm: add continuous clock support ASoC: meson: axg-tdm-interface: manage formatters in trigger ASoC: meson: axg-card: make links nonatomic ASoC: meson: axg-fifo: use threaded irq to check periods ALSA: hda/realtek: Fix mute led of HP Laptop 15-da3001TU ALSA: emu10k1: make E-MU FPGA writes potentially more reliable ALSA: emu10k1: fix E-MU dock initialization ALSA: emu10k1: use mutex for E-MU FPGA access locking ALSA: emu10k1: move the whole GPIO event handling to the workqueue ALSA: emu10k1: factor out snd_emu1010_load_dock_firmware() ALSA: emu10k1: fix E-MU card dock presence monitoring ASoC: rt715-sdca: volume step modification ...
2024-05-03Merge tag 'drm-fixes-2024-05-03' of https://gitlab.freedesktop.org/drm/kernelLinus Torvalds
Pull drm fixes from Dave Airlie: "Weekly fixes, mostly made up from amdgpu and some panel changes. Otherwise xe, nouveau, vmwgfx and a couple of others, all seems pretty on track. amdgpu: - Fix VRAM memory accounting - DCN 3.1 fixes - DCN 2.0 fix - DCN 3.1.5 fix - DCN 3.5 fix - DCN 3.2.1 fix - DP fixes - Seamless boot fix - Fix call order in amdgpu_ttm_move() - Fix doorbell regression - Disable panel replay temporarily amdkfd: - Flush wq before creating kfd process xe: - Fix UAF on rebind worker - Fix ADL-N display integration imagination: - fix page-count macro nouveau: - avoid page-table allocation failures - fix firmware memory allocation panel: - ili9341: avoid OF for device properties; respect deferred probe; fix usage of errno codes ttm: - fix status output vmwgfx: - fix legacy display unit - fix read length in fence signalling" * tag 'drm-fixes-2024-05-03' of https://gitlab.freedesktop.org/drm/kernel: (25 commits) drm/xe/display: Fix ADL-N detection drm/panel: ili9341: Use predefined error codes drm/panel: ili9341: Respect deferred probe drm/panel: ili9341: Correct use of device property APIs drm/xe/vm: prevent UAF in rebind_work_func() drm/amd/display: Disable panel replay by default for now drm/amdgpu: fix doorbell regression drm/amdkfd: Flush the process wq before creating a kfd_process drm/amd/display: Disable seamless boot on 128b/132b encoding drm/amd/display: Fix DC mode screen flickering on DCN321 drm/amd/display: Add VCO speed parameter for DCN31 FPU drm/amdgpu: once more fix the call oder in amdgpu_ttm_move() v2 drm/amd/display: Allocate zero bw after bw alloc enable drm/amd/display: Fix incorrect DSC instance for MST drm/amd/display: Atom Integrated System Info v2_2 for DCN35 drm/amd/display: Add dtbclk access to dcn315 drm/amd/display: Ensure that dmcub support flag is set for DCN20 drm/amd/display: Handle Y carry-over in VCP X.Y calculation drm/amdgpu: Fix VRAM memory accounting drm/vmwgfx: Fix invalid reads in fence signaled events ...
2024-05-03Merge tag 'spi-fix-v6.9-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "A few small fixes for v6.9, The core fix is for issues with reuse of a spi_message in the case where we've got queued messages (a relatively rare occurrence with modern code so it wasn't noticed in testing). We also avoid an issue with the Kunpeng driver by simply removing the debug interface that could trigger it, and address issues with confusing and corrupted output when printing the IP version of the AXI SPI engine" * tag 'spi-fix-v6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: fix null pointer dereference within spi_sync spi: hisi-kunpeng: Delete the dump interface of data registers in debugfs spi: axi-spi-engine: fix version format string
2024-05-03block: fix and simplify blkdevparts= cmdline parsingINAGAKI Hiroshi
Fix the cmdline parsing of the "blkdevparts=" parameter using strsep(), which makes the code simpler. Before commit 146afeb235cc ("block: use strscpy() to instead of strncpy()"), we used a strncpy() to copy a block device name and partition names. The commit simply replaced a strncpy() and NULL termination with a strscpy(). It did not update calculations of length passed to strscpy(). While the length passed to strncpy() is just a length of valid characters without NULL termination ('\0'), strscpy() takes it as a length of the destination buffer, including a NULL termination. Since the source buffer is not necessarily NULL terminated, the current code copies "length - 1" characters and puts a NULL character in the destination buffer. It replaces the last character with NULL and breaks the parsing. As an example, that buffer will be passed to parse_parts() and breaks parsing sub-partitions due to the missing ')' at the end, like the following. example (Check Point V-80 & OpenWrt): - Linux Kernel 6.6 [ 0.000000] Kernel command line: console=ttyS0,115200 earlycon=uart8250,mmio32,0xf0512000 crashkernel=30M mvpp2x.queue_mode=1 blkdevparts=mmcblk1:48M@10M(kernel-1),1M(dtb-1),720M(rootfs-1),48M(kernel-2),1M(dtb-2),720M(rootfs-2),300M(default_sw),650M(logs),1M(preset_cfg),1M(adsl),-(storage) maxcpus=4 ... [ 0.884016] mmc1: new HS200 MMC card at address 0001 [ 0.889951] mmcblk1: mmc1:0001 004GA0 3.69 GiB [ 0.895043] cmdline partition format is invalid. [ 0.895704] mmcblk1: p1 [ 0.903447] mmcblk1boot0: mmc1:0001 004GA0 2.00 MiB [ 0.908667] mmcblk1boot1: mmc1:0001 004GA0 2.00 MiB [ 0.913765] mmcblk1rpmb: mmc1:0001 004GA0 512 KiB, chardev (248:0) 1. "48M@10M(kernel-1),..." is passed to strscpy() with length=17 from parse_parts() 2. strscpy() returns -E2BIG and the destination buffer has "48M@10M(kernel-1\0" 3. "48M@10M(kernel-1\0" is passed to parse_subpart() 4. parse_subpart() fails to find ')' when parsing a partition name, and returns error - Linux Kernel 6.1 [ 0.000000] Kernel command line: console=ttyS0,115200 earlycon=uart8250,mmio32,0xf0512000 crashkernel=30M mvpp2x.queue_mode=1 blkdevparts=mmcblk1:48M@10M(kernel-1),1M(dtb-1),720M(rootfs-1),48M(kernel-2),1M(dtb-2),720M(rootfs-2),300M(default_sw),650M(logs),1M(preset_cfg),1M(adsl),-(storage) maxcpus=4 ... [ 0.953142] mmc1: new HS200 MMC card at address 0001 [ 0.959114] mmcblk1: mmc1:0001 004GA0 3.69 GiB [ 0.964259] mmcblk1: p1(kernel-1) p2(dtb-1) p3(rootfs-1) p4(kernel-2) p5(dtb-2) 6(rootfs-2) p7(default_sw) p8(logs) p9(preset_cfg) p10(adsl) p11(storage) [ 0.979174] mmcblk1boot0: mmc1:0001 004GA0 2.00 MiB [ 0.984674] mmcblk1boot1: mmc1:0001 004GA0 2.00 MiB [ 0.989926] mmcblk1rpmb: mmc1:0001 004GA0 512 KiB, chardev (248:0 By the way, strscpy() takes a length of destination buffer and it is often confusing when copying characters with a specified length. Using strsep() helps to separate the string by the specified character. Then, we can use strscpy() naturally with the size of the destination buffer. Separating the string on the fly is also useful to omit the redundant string copy, reducing memory usage and improve the code readability. Fixes: 146afeb235cc ("block: use strscpy() to instead of strncpy()") Suggested-by: Naohiro Aota <naota@elisp.net> Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> Reviewed-by: Daniel Golle <daniel@makrotopia.org> Link: https://lore.kernel.org/r/20240421074005.565-1-musashino.open@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-05-03block: refine the EOF check in blkdev_iomap_beginChristoph Hellwig
blkdev_iomap_begin rounds down the offset to the logical block size before stashing it in iomap->offset and checking that it still is inside the inode size. Check the i_size check to the raw pos value so that we don't try a zero size write if iter->pos is unaligned. Fixes: 487c607df790 ("block: use iomap for writes to block devices") Reported-by: syzbot+0a3683a0a6fecf909244@syzkaller.appspotmail.com Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: syzbot+0a3683a0a6fecf909244@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/20240503081042.2078062-1-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-05-03block: add a partscan sysfs attribute for disksChristoph Hellwig
Userspace had been unknowingly relying on a non-stable interface of kernel internals to determine if partition scanning is enabled for a given disk. Provide a stable interface for this purpose instead. Cc: stable@vger.kernel.org # 6.3+ Depends-on: 140ce28dd3be ("block: add a disk_has_partscan helper") Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/linux-block/ZhQJf8mzq_wipkBH@gardel-login/ Link: https://lore.kernel.org/r/20240502130033.1958492-3-hch@lst.de [axboe: add links and commit message from Keith] Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-05-03block: add a disk_has_partscan helperChristoph Hellwig
Add a helper to check if partition scanning is enabled instead of open coding the check in a few places. This now always checks for the hidden flag even if all but one of the callers are never reachable for hidden gendisks. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20240502130033.1958492-2-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-05-03arm64: dts: rockchip: add rk3588 pcie and php IOMMUsNiklas Cassel
The mmu600_pcie is connected with the five PCIe controllers. The mmu600_php is connected with the USB3 controller, the GMAC controllers, and the SATA controllers. See 8.2 Block Diagram, in rk3588 TRM (Technical Reference Manual). The IOMMUs are disabled by default, as further patches are needed to program the SID/SSIDs in to the IOMMUs. iommu: Default domain type: Translated iommu: DMA domain TLB invalidation policy: strict mode arm-smmu-v3 fc900000.iommu: ias 48-bit, oas 48-bit (features 0x001c1eaf) arm-smmu-v3 fc900000.iommu: allocated 65536 entries for cmdq arm-smmu-v3 fc900000.iommu: allocated 32768 entries for evtq arm-smmu-v3 fc900000.iommu: msi_domain absent - falling back to wired irqs Additionally, the IOMMU correctly triggers an IOMMU fault when a PCIe device performs a write (since the device hasn't been assigned a SID/SSID): arm-smmu-v3 fc900000.iommu: event 0x02 received: arm-smmu-v3 fc900000.iommu: 0x0000010000000002 arm-smmu-v3 fc900000.iommu: 0x0000000000000000 arm-smmu-v3 fc900000.iommu: 0x0000000000000000 arm-smmu-v3 fc900000.iommu: 0x0000000000000000 While this doesn't provide much value as is, having the devices as disabled in the device tree will allow developers to see that the rk3588 actually has IOMMUs on the SoC. Signed-off-by: Niklas Cassel <cassel@kernel.org> Link: https://lore.kernel.org/r/20240502140231.477049-2-cassel@kernel.org Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-05-03arm64: dts: rockchip: enable onboard spi flash for rock-3aChukun Pan
There is a mx25u12835f spi flash on this board, enable it. [ 2.525805] spi-nor spi4.0: mx25u12835f (16384 Kbytes) Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn> Link: https://lore.kernel.org/r/20240409120003.309358-2-amadeus@jmu.edu.cn Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-05-03arm64: dts: rockchip: add USB-C support to rk3588s-orangepi-5Jimmy Hon
Add support for using the Orange Pi 5 USB-C port for USB in OHCI, EHCI or XHCI mode. Displayport AltMode is not yet supported. Signed-off-by: Jimmy Hon <honyuenkwun@gmail.com> Link: https://lore.kernel.org/r/20240418035232.35344-2-honyuenkwun@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-05-03arm64: dts: rockchip: Enable GPU on Orange Pi 5Jimmy Hon
Enable the Mali GPU in the Orange Pi 5 Signed-off-by: Jimmy Hon <honyuenkwun@gmail.com> Link: https://lore.kernel.org/r/20240425222913.1760-1-honyuenkwun@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-05-03arm64: dts: rockchip: enable GPU on khadas-edge2Muhammed Efe Cetin
Enable the Mali GPU node on Khadas Edge 2. Signed-off-by: Muhammed Efe Cetin <efectn@protonmail.com> Link: https://lore.kernel.org/r/20240501142241.98554-1-efectn@6tel.net Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-05-03arm64: dts: rockchip: Add USB3 on Edgeble NCM6A-IO boardAnand Moon
Add the proper nodes to activate the USB 3.0 ports on the Edgeble NCM6A-IO board. Cc: Jagan Teki <jagan@edgeble.ai> Signed-off-by: Anand Moon <anand@edgeble.ai> Link: https://lore.kernel.org/r/20240502094246.4695-2-anand@edgeble.ai Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-05-03arm64: dts: rockchip: Support poweroff on Edgeble Neural Compute ModuleAnand Moon
On Edgeble Neural Compute Module add system-power-controller property to RK806 pmic so that these chips can power off the device. Cc: Jagan Teki <jagan@edgeble.ai> Signed-off-by: Anand Moon <anand@edgeble.ai> Link: https://lore.kernel.org/r/20240502094246.4695-1-anand@edgeble.ai Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-05-03arm64: dts: rockchip: Add Radxa ROCK 3CChukun Pan
The Radxa ROCK 3C is a development board with the Rockchip RK3566 SoC. It has the following features: - 1/2/4GB LPDDR4 - 1x HDMI Type A - 1x PCIE 2.0 slot - 1x FAN connector - 3.5mm jack with mic - 1GbE RTL8211F Ethernet - 1x USB 3.0, 3x USB 2.0 - 40-pin expansion header - MicroSD card/eMMC socket - 16MB SPI NOR (gd25lq128d) - AP6256 or AIC8800 WiFi/BT Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn> Link: https://lore.kernel.org/r/20240428123618.72170-3-amadeus@jmu.edu.cn [dropped rk809-sound and not specified pmic sound properties] Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-05-03dt-bindings: arm: rockchip: add Radxa ROCK 3CChukun Pan
The Radxa ROCK 3C is a similar board to the Radxa ROCK 3A with the Rockchip RK3566 SoC. Add devicetree binding documentation for it. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20240428123618.72170-2-amadeus@jmu.edu.cn Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-05-03crypto: hisilicon/sec2 - fix for register offsetWenkai Lin
The offset of SEC_CORE_ENABLE_BITMAP should be 0 instead of 32, it cause a kasan shift-out-bounds warning, fix it. Signed-off-by: Wenkai Lin <linwenkai6@hisilicon.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-05-03crypto: hisilicon/debugfs - mask the unnecessary info from the dumpChenghai Huang
Some information showed by the dump function is invalid. Mask the unnecessary information from the dump file. Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-05-03crypto: qat - specify firmware files for 402xxGiovanni Cabiddu
The 4xxx driver can probe 4xxx and 402xx devices. However, the driver only specifies the firmware images required for 4xxx. This might result in external tools missing these binaries, if required, in the initramfs. Specify the firmware image used by 402xx with the MODULE_FIRMWARE() macros in the 4xxx driver. Fixes: a3e8c919b993 ("crypto: qat - add support for 402xx devices") Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Reviewed-by: Damian Muszynski <damian.muszynski@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-05-03drm/meson: dw-hdmi: add bandgap setting for g12Jerome Brunet
When no mode is set, the utility pin appears to be grounded. No signal is getting through. This is problematic because ARC and eARC use this line and may do so even if no display mode is set. This change enable the bandgap setting on g12 chip, which fix the problem with the utility pin. This is done by restoring init values on PHY init and disable. Fixes: 3b7c1237a72a ("drm/meson: Add G12A support for the DW-HDMI Glue") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20240426160256.3089978-3-jbrunet@baylibre.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240426160256.3089978-3-jbrunet@baylibre.com
2024-05-03drm/meson: dw-hdmi: power up phy on device initJerome Brunet
The phy is not in a useful state right after init. It will become useful, including for auxiliary function such as CEC or ARC, after the first mode is set. This is a problem on systems where the display is using another interface like DSI or CVBS. This change refactor the init and mode change callback to power up the PHY on init and leave only what is necessary for mode changes in the related function. This is enough to fix CEC operation when HDMI display is not enabled. Fixes: 3f68be7d8e96 ("drm/meson: Add support for HDMI encoder and DW-HDMI bridge + PHY") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20240426160256.3089978-2-jbrunet@baylibre.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240426160256.3089978-2-jbrunet@baylibre.com
2024-05-03arm64: dts: exynos: gs101: specify empty clocks for remaining pinctrlAndré Draszik
The pinctrl instances hsi1, gsactrl, and gsacore need a clock for register access to work. Since we haven't implemented the relevant CMUs for the clocks required by these instances just add empty clocks for now so as to make the DT pass the validation checks. Once the clocks are implmented in the gs101 clock driver, these should be updated then. Signed-off-by: André Draszik <andre.draszik@linaro.org> Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org> Link: https://lore.kernel.org/r/20240430-samsung-pinctrl-busclock-dts-v2-4-14fc988139dd@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-05-03arm64: dts: exynos: gs101: specify bus clock for pinctrl_hsi2André Draszik
This bus clock is needed for pinctrl register access to work. Add it. Signed-off-by: André Draszik <andre.draszik@linaro.org> Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org> Link: https://lore.kernel.org/r/20240430-samsung-pinctrl-busclock-dts-v2-3-14fc988139dd@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-05-03arm64: dts: exynos: gs101: specify bus clock for pinctrl_peric[01]André Draszik
This bus clock is needed for pinctrl register access to work. Add it. Signed-off-by: André Draszik <andre.draszik@linaro.org> Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org> Link: https://lore.kernel.org/r/20240430-samsung-pinctrl-busclock-dts-v2-2-14fc988139dd@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-05-03arm64: dts: exynos: gs101: specify bus clock for pinctrl (far) aliveAndré Draszik
This bus clock is needed for pinctrl register access to work. Add it. Signed-off-by: André Draszik <andre.draszik@linaro.org> Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org> Link: https://lore.kernel.org/r/20240430-samsung-pinctrl-busclock-dts-v2-1-14fc988139dd@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-05-03arm64: defconfig: enable Khadas TS050 panel as moduleNeil Armstrong
Enable the Khadas TS050 panel driver as module since it's required to use the TS050 panel on the Khadas VIM3 and VIM3L boards. Link: https://lore.kernel.org/r/20240422-amlogic-v6-9-upstream-deconfig-dsi-v1-1-01511908477c@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2024-05-03slimbus: qcom-ngd-ctrl: Add timeout for wait operationViken Dadhaniya
In current driver qcom_slim_ngd_up_worker() indefinitely waiting for ctrl->qmi_up completion object. This is resulting in workqueue lockup on Kthread. Added wait_for_completion_interruptible_timeout to allow the thread to wait for specific timeout period and bail out instead waiting infinitely. Fixes: a899d324863a ("slimbus: qcom-ngd-ctrl: add Sub System Restart support") Cc: stable@vger.kernel.org Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Viken Dadhaniya <quic_vdadhani@quicinc.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20240430091238.35209-2-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-03spi: stm32: enable controller before asserting CSBen Wolsieffer
On the STM32F4/7, the MOSI and CLK pins float while the controller is disabled. CS is a regular GPIO, and therefore always driven. Currently, the controller is enabled in the transfer_one() callback, which runs after CS is asserted. Therefore, there is a period where the SPI pins are floating while CS is asserted, making it possible for stray signals to disrupt communications. An analogous problem occurs at the end of the transfer when the controller is disabled before CS is released. This problem can be reliably observed by enabling the pull-up (if CPOL=0) or pull-down (if CPOL=1) on the clock pin. This will cause two extra unintended clock edges per transfer, when the controller is enabled and disabled. Note that this bug is likely not present on the STM32H7, because this driver sets the AFCNTR bit (not supported on F4/F7), which keeps the SPI pins driven even while the controller is disabled. Enabling/disabling the controller as part of runtime PM was suggested as an alternative approach, but this breaks the driver on the STM32MP1 (see [1]). The following quote from the manual may explain this: > To restart the internal state machine properly, SPI is strongly > suggested to be disabled and re-enabled before next transaction starts > despite its setting is not changed. This patch has been tested on an STM32F746 with a MAX14830 UART expander. [1] https://lore.kernel.org/lkml/ZXzRi_h2AMqEhMVw@dell-precision-5540/T/ Signed-off-by: Ben Wolsieffer <ben.wolsieffer@hefring.com> Link: https://lore.kernel.org/r/20240424135237.1329001-2-ben.wolsieffer@hefring.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-05-02tcp: Use refcount_inc_not_zero() in tcp_twsk_unique().Kuniyuki Iwashima
Anderson Nascimento reported a use-after-free splat in tcp_twsk_unique() with nice analysis. Since commit ec94c2696f0b ("tcp/dccp: avoid one atomic operation for timewait hashdance"), inet_twsk_hashdance() sets TIME-WAIT socket's sk_refcnt after putting it into ehash and releasing the bucket lock. Thus, there is a small race window where other threads could try to reuse the port during connect() and call sock_hold() in tcp_twsk_unique() for the TIME-WAIT socket with zero refcnt. If that happens, the refcnt taken by tcp_twsk_unique() is overwritten and sock_put() will cause underflow, triggering a real use-after-free somewhere else. To avoid the use-after-free, we need to use refcount_inc_not_zero() in tcp_twsk_unique() and give up on reusing the port if it returns false. [0]: refcount_t: addition on 0; use-after-free. WARNING: CPU: 0 PID: 1039313 at lib/refcount.c:25 refcount_warn_saturate+0xe5/0x110 CPU: 0 PID: 1039313 Comm: trigger Not tainted 6.8.6-200.fc39.x86_64 #1 Hardware name: VMware, Inc. VMware20,1/440BX Desktop Reference Platform, BIOS VMW201.00V.21805430.B64.2305221830 05/22/2023 RIP: 0010:refcount_warn_saturate+0xe5/0x110 Code: 42 8e ff 0f 0b c3 cc cc cc cc 80 3d aa 13 ea 01 00 0f 85 5e ff ff ff 48 c7 c7 f8 8e b7 82 c6 05 96 13 ea 01 01 e8 7b 42 8e ff <0f> 0b c3 cc cc cc cc 48 c7 c7 50 8f b7 82 c6 05 7a 13 ea 01 01 e8 RSP: 0018:ffffc90006b43b60 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff888009bb3ef0 RCX: 0000000000000027 RDX: ffff88807be218c8 RSI: 0000000000000001 RDI: ffff88807be218c0 RBP: 0000000000069d70 R08: 0000000000000000 R09: ffffc90006b439f0 R10: ffffc90006b439e8 R11: 0000000000000003 R12: ffff8880029ede84 R13: 0000000000004e20 R14: ffffffff84356dc0 R15: ffff888009bb3ef0 FS: 00007f62c10926c0(0000) GS:ffff88807be00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020ccb000 CR3: 000000004628c005 CR4: 0000000000f70ef0 PKRU: 55555554 Call Trace: <TASK> ? refcount_warn_saturate+0xe5/0x110 ? __warn+0x81/0x130 ? refcount_warn_saturate+0xe5/0x110 ? report_bug+0x171/0x1a0 ? refcount_warn_saturate+0xe5/0x110 ? handle_bug+0x3c/0x80 ? exc_invalid_op+0x17/0x70 ? asm_exc_invalid_op+0x1a/0x20 ? refcount_warn_saturate+0xe5/0x110 tcp_twsk_unique+0x186/0x190 __inet_check_established+0x176/0x2d0 __inet_hash_connect+0x74/0x7d0 ? __pfx___inet_check_established+0x10/0x10 tcp_v4_connect+0x278/0x530 __inet_stream_connect+0x10f/0x3d0 inet_stream_connect+0x3a/0x60 __sys_connect+0xa8/0xd0 __x64_sys_connect+0x18/0x20 do_syscall_64+0x83/0x170 entry_SYSCALL_64_after_hwframe+0x78/0x80 RIP: 0033:0x7f62c11a885d Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d a3 45 0c 00 f7 d8 64 89 01 48 RSP: 002b:00007f62c1091e58 EFLAGS: 00000296 ORIG_RAX: 000000000000002a RAX: ffffffffffffffda RBX: 0000000020ccb004 RCX: 00007f62c11a885d RDX: 0000000000000010 RSI: 0000000020ccb000 RDI: 0000000000000003 RBP: 00007f62c1091e90 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000296 R12: 00007f62c10926c0 R13: ffffffffffffff88 R14: 0000000000000000 R15: 00007ffe237885b0 </TASK> Fixes: ec94c2696f0b ("tcp/dccp: avoid one atomic operation for timewait hashdance") Reported-by: Anderson Nascimento <anderson@allelesecurity.com> Closes: https://lore.kernel.org/netdev/37a477a6-d39e-486b-9577-3463f655a6b7@allelesecurity.com/ Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20240501213145.62261-1-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-02tcp: defer shutdown(SEND_SHUTDOWN) for TCP_SYN_RECV socketsEric Dumazet
TCP_SYN_RECV state is really special, it is only used by cross-syn connections, mostly used by fuzzers. In the following crash [1], syzbot managed to trigger a divide by zero in tcp_rcv_space_adjust() A socket makes the following state transitions, without ever calling tcp_init_transfer(), meaning tcp_init_buffer_space() is also not called. TCP_CLOSE connect() TCP_SYN_SENT TCP_SYN_RECV shutdown() -> tcp_shutdown(sk, SEND_SHUTDOWN) TCP_FIN_WAIT1 To fix this issue, change tcp_shutdown() to not perform a TCP_SYN_RECV -> TCP_FIN_WAIT1 transition, which makes no sense anyway. When tcp_rcv_state_process() later changes socket state from TCP_SYN_RECV to TCP_ESTABLISH, then look at sk->sk_shutdown to finally enter TCP_FIN_WAIT1 state, and send a FIN packet from a sane socket state. This means tcp_send_fin() can now be called from BH context, and must use GFP_ATOMIC allocations. [1] divide error: 0000 [#1] PREEMPT SMP KASAN NOPTI CPU: 1 PID: 5084 Comm: syz-executor358 Not tainted 6.9.0-rc6-syzkaller-00022-g98369dccd2f8 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024 RIP: 0010:tcp_rcv_space_adjust+0x2df/0x890 net/ipv4/tcp_input.c:767 Code: e3 04 4c 01 eb 48 8b 44 24 38 0f b6 04 10 84 c0 49 89 d5 0f 85 a5 03 00 00 41 8b 8e c8 09 00 00 89 e8 29 c8 48 0f af c3 31 d2 <48> f7 f1 48 8d 1c 43 49 8d 96 76 08 00 00 48 89 d0 48 c1 e8 03 48 RSP: 0018:ffffc900031ef3f0 EFLAGS: 00010246 RAX: 0c677a10441f8f42 RBX: 000000004fb95e7e RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000027d4b11f R08: ffffffff89e535a4 R09: 1ffffffff25e6ab7 R10: dffffc0000000000 R11: ffffffff8135e920 R12: ffff88802a9f8d30 R13: dffffc0000000000 R14: ffff88802a9f8d00 R15: 1ffff1100553f2da FS: 00005555775c0380(0000) GS:ffff8880b9500000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f1155bf2304 CR3: 000000002b9f2000 CR4: 0000000000350ef0 Call Trace: <TASK> tcp_recvmsg_locked+0x106d/0x25a0 net/ipv4/tcp.c:2513 tcp_recvmsg+0x25d/0x920 net/ipv4/tcp.c:2578 inet6_recvmsg+0x16a/0x730 net/ipv6/af_inet6.c:680 sock_recvmsg_nosec net/socket.c:1046 [inline] sock_recvmsg+0x109/0x280 net/socket.c:1068 ____sys_recvmsg+0x1db/0x470 net/socket.c:2803 ___sys_recvmsg net/socket.c:2845 [inline] do_recvmmsg+0x474/0xae0 net/socket.c:2939 __sys_recvmmsg net/socket.c:3018 [inline] __do_sys_recvmmsg net/socket.c:3041 [inline] __se_sys_recvmmsg net/socket.c:3034 [inline] __x64_sys_recvmmsg+0x199/0x250 net/socket.c:3034 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7faeb6363db9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 c1 17 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffcc1997168 EFLAGS: 00000246 ORIG_RAX: 000000000000012b RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007faeb6363db9 RDX: 0000000000000001 RSI: 0000000020000bc0 RDI: 0000000000000005 RBP: 0000000000000000 R08: 0000000000000000 R09: 000000000000001c R10: 0000000000000122 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000001 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Link: https://lore.kernel.org/r/20240501125448.896529-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-03Merge tag 'drm-misc-fixes-2024-05-02' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes Short summary of fixes pull: imagination: - fix page-count macro nouveau: - avoid page-table allocation failures - fix firmware memory allocation panel: - ili9341: avoid OF for device properties; respect deferred probe; fix usage of errno codes ttm: - fix status output vmwgfx: - fix legacy display unit - fix read length in fence signalling Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20240502192117.GA12158@linux.fritz.box
2024-05-03Merge tag 'drm-xe-fixes-2024-05-02' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes - Fix UAF on rebind worker - Fix ADL-N display integration Signed-off-by: Dave Airlie <airlied@redhat.com> From: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/6bontwst3mbxozs6u3ad5n3g5zmaucrngbfwv4hkfhpscnwlym@wlwjgjx6pwue
2024-05-03Merge tag 'amd-drm-fixes-6.9-2024-05-01' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-6.9-2024-05-01: amdgpu: - Fix VRAM memory accounting - DCN 3.1 fixes - DCN 2.0 fix - DCN 3.1.5 fix - DCN 3.5 fix - DCN 3.2.1 fix - DP fixes - Seamless boot fix - Fix call order in amdgpu_ttm_move() - Fix doorbell regression - Disable panel replay temporarily amdkfd: - Flush wq before creating kfd process Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240501135054.1919108-1-alexander.deucher@amd.com
2024-05-02Merge tag 'md-6.10-20240502' of ↵Jens Axboe
https://git.kernel.org/pub/scm/linux/kernel/git/song/md into for-6.10/block Pull MD fix from Song: "This fixes an issue observed with dm-raid." * tag 'md-6.10-20240502' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md: md: fix resync softlockup when bitmap size is less than array size
2024-05-02md: fix resync softlockup when bitmap size is less than array sizeYu Kuai
Is is reported that for dm-raid10, lvextend + lvchange --syncaction will trigger following softlockup: kernel:watchdog: BUG: soft lockup - CPU#3 stuck for 26s! [mdX_resync:6976] CPU: 7 PID: 3588 Comm: mdX_resync Kdump: loaded Not tainted 6.9.0-rc4-next-20240419 #1 RIP: 0010:_raw_spin_unlock_irq+0x13/0x30 Call Trace: <TASK> md_bitmap_start_sync+0x6b/0xf0 raid10_sync_request+0x25c/0x1b40 [raid10] md_do_sync+0x64b/0x1020 md_thread+0xa7/0x170 kthread+0xcf/0x100 ret_from_fork+0x30/0x50 ret_from_fork_asm+0x1a/0x30 And the detailed process is as follows: md_do_sync j = mddev->resync_min while (j < max_sectors) sectors = raid10_sync_request(mddev, j, &skipped) if (!md_bitmap_start_sync(..., &sync_blocks)) // md_bitmap_start_sync set sync_blocks to 0 return sync_blocks + sectors_skippe; // sectors = 0; j += sectors; // j never change Root cause is that commit 301867b1c168 ("md/raid10: check slab-out-of-bounds in md_bitmap_get_counter") return early from md_bitmap_get_counter(), without setting returned blocks. Fix this problem by always set returned blocks from md_bitmap_get_counter"(), as it used to be. Noted that this patch just fix the softlockup problem in kernel, the case that bitmap size doesn't match array size still need to be fixed. Fixes: 301867b1c168 ("md/raid10: check slab-out-of-bounds in md_bitmap_get_counter") Reported-and-tested-by: Nigel Croxon <ncroxon@redhat.com> Closes: https://lore.kernel.org/all/71ba5272-ab07-43ba-8232-d2da642acb4e@redhat.com/ Signed-off-by: Yu Kuai <yukuai3@huawei.com> Link: https://lore.kernel.org/r/20240422065824.2516-1-yukuai1@huaweicloud.com Signed-off-by: Song Liu <song@kernel.org>
2024-05-02btrfs: make sure that WRITTEN is set on all metadata blocksJosef Bacik
We previously would call btrfs_check_leaf() if we had the check integrity code enabled, which meant that we could only run the extended leaf checks if we had WRITTEN set on the header flags. This leaves a gap in our checking, because we could end up with corruption on disk where WRITTEN isn't set on the leaf, and then the extended leaf checks don't get run which we rely on to validate all of the item pointers to make sure we don't access memory outside of the extent buffer. However, since 732fab95abe2 ("btrfs: check-integrity: remove CONFIG_BTRFS_FS_CHECK_INTEGRITY option") we no longer call btrfs_check_leaf() from btrfs_mark_buffer_dirty(), which means we only ever call it on blocks that are being written out, and thus have WRITTEN set, or that are being read in, which should have WRITTEN set. Add checks to make sure we have WRITTEN set appropriately, and then make sure __btrfs_check_leaf() always does the item checking. This will protect us from file systems that have been corrupted and no longer have WRITTEN set on some of the blocks. This was hit on a crafted image tweaking the WRITTEN bit and reported by KASAN as out-of-bound access in the eb accessors. The example is a dir item at the end of an eb. [2.042] BTRFS warning (device loop1): bad eb member start: ptr 0x3fff start 30572544 member offset 16410 size 2 [2.040] general protection fault, probably for non-canonical address 0xe0009d1000000003: 0000 [#1] PREEMPT SMP KASAN NOPTI [2.537] KASAN: maybe wild-memory-access in range [0x0005088000000018-0x000508800000001f] [2.729] CPU: 0 PID: 2587 Comm: mount Not tainted 6.8.2 #1 [2.729] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 [2.621] RIP: 0010:btrfs_get_16+0x34b/0x6d0 [2.621] RSP: 0018:ffff88810871fab8 EFLAGS: 00000206 [2.621] RAX: 0000a11000000003 RBX: ffff888104ff8720 RCX: ffff88811b2288c0 [2.621] RDX: dffffc0000000000 RSI: ffffffff81dd8aca RDI: ffff88810871f748 [2.621] RBP: 000000000000401a R08: 0000000000000001 R09: ffffed10210e3ee9 [2.621] R10: ffff88810871f74f R11: 205d323430333737 R12: 000000000000001a [2.621] R13: 000508800000001a R14: 1ffff110210e3f5d R15: ffffffff850011e8 [2.621] FS: 00007f56ea275840(0000) GS:ffff88811b200000(0000) knlGS:0000000000000000 [2.621] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [2.621] CR2: 00007febd13b75c0 CR3: 000000010bb50000 CR4: 00000000000006f0 [2.621] Call Trace: [2.621] <TASK> [2.621] ? show_regs+0x74/0x80 [2.621] ? die_addr+0x46/0xc0 [2.621] ? exc_general_protection+0x161/0x2a0 [2.621] ? asm_exc_general_protection+0x26/0x30 [2.621] ? btrfs_get_16+0x33a/0x6d0 [2.621] ? btrfs_get_16+0x34b/0x6d0 [2.621] ? btrfs_get_16+0x33a/0x6d0 [2.621] ? __pfx_btrfs_get_16+0x10/0x10 [2.621] ? __pfx_mutex_unlock+0x10/0x10 [2.621] btrfs_match_dir_item_name+0x101/0x1a0 [2.621] btrfs_lookup_dir_item+0x1f3/0x280 [2.621] ? __pfx_btrfs_lookup_dir_item+0x10/0x10 [2.621] btrfs_get_tree+0xd25/0x1910 Reported-by: lei lu <llfamsec@gmail.com> CC: stable@vger.kernel.org # 6.7+ Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> [ copy more details from report ] Signed-off-by: David Sterba <dsterba@suse.com>
2024-05-02Merge branch 'shared-zeropage' into featuresAlexander Gordeev
David Hildenbrand says: =================== This series fixes one issue with uffd + shared zeropages on s390x and fixes that "ordinary" KVM guests can make use of shared zeropages again. userfaultfd could currently end up mapping shared zeropages into processes that forbid shared zeropages. This only apples to s390x, relevant for handling PV guests and guests that use storage kets correctly. Fix it by placing a zeroed folio instead of the shared zeropage during UFFDIO_ZEROPAGE instead. I stumbled over this issue while looking into a customer scenario that is using: (1) Memory ballooning for dynamic resizing. Start a VM with, say, 100 GiB and inflate the balloon during boot to 60 GiB. The VM has ~40 GiB available and additional memory can be "fake hotplugged" to the VM later on demand by deflating the balloon. Actual memory overcommit is not desired, so physical memory would only be moved between VMs. (2) Live migration of VMs between sites to evacuate servers in case of emergency. Without the shared zeropage, during (2), the VM would suddenly consume 100 GiB on the migration source and destination. On the migration source, where we don't excpect memory overcommit, we could easilt end up crashing the VM during migration. Independent of that, memory handed back to the hypervisor using "free page reporting" would end up consuming actual memory after the migration on the destination, not getting freed up until reused+freed again. While there might be ways to optimize parts of this in QEMU, we really should just support the shared zeropage again for ordinary VMs. We only expect legcy guests to make use of storage keys, so let's handle zeropages again when enabling storage keys or when enabling PV. To not break userfaultfd like we did in the past, don't zap the shared zeropages, but instead trigger unsharing faults, just like we do for unsharing KSM pages in break_ksm(). Unsharing faults will simply replace the shared zeropage by a zeroed anonymous folio. We can already trigger the same fault path using GUP, when trying to long-term pin a shared zeropage, but also when unmerging a KSM-placed zeropages, so this is nothing new. Patch #1 tested on 86-64 by forcing mm_forbids_zeropage() to be 1, and running the uffd selftests. Patch #2 tested on s390x: the live migration scenario now works as expected, and kvm-unit-tests that trigger usage of skeys work well, whereby I can see detection and unsharing of shared zeropages. Further (as broken in v2), I tested that the shared zeropage is no longer populated after skeys are used -- that mm_forbids_zeropage() works as expected: ./s390x-run s390x/skey.elf \ -no-shutdown \ -chardev socket,id=monitor,path=/var/tmp/mon,server,nowait \ -mon chardev=monitor,mode=readline Then, in another shell: # cat /proc/`pgrep qemu`/smaps_rollup | grep Rss Rss: 31484 kB # echo "dump-guest-memory tmp" | sudo nc -U /var/tmp/mon ... # cat /proc/`pgrep qemu`/smaps_rollup | grep Rss Rss: 160452 kB -> Reading guest memory does not populate the shared zeropage Doing the same with selftest.elf (no skeys) # cat /proc/`pgrep qemu`/smaps_rollup | grep Rss Rss: 30900 kB # echo "dump-guest-memory tmp" | sudo nc -U /var/tmp/mon ... # cat /proc/`pgrep qemu`/smaps_rollup | grep Rsstmp/mon Rss: 30924 kB -> Reading guest memory does populate the shared zeropage =================== Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2024-05-02btrfs: qgroup: do not check qgroup inherit if qgroup is disabledQu Wenruo
[BUG] After kernel commit 86211eea8ae1 ("btrfs: qgroup: validate btrfs_qgroup_inherit parameter"), user space tool snapper will fail to create snapshot using its timeline feature. [CAUSE] It turns out that, if using timeline snapper would unconditionally pass btrfs_qgroup_inherit parameter (assigning the new snapshot to qgroup 1/0) for snapshot creation. In that case, since qgroup is disabled there would be no qgroup 1/0, and btrfs_qgroup_check_inherit() would return -ENOENT and fail the whole snapshot creation. [FIX] Just skip the check if qgroup is not enabled. This is to keep the older behavior for user space tools, as if the kernel behavior changed for user space, it is a regression of kernel. Thankfully snapper is also fixing the behavior by detecting if qgroup is running in the first place, so the effect should not be that huge. Link: https://github.com/openSUSE/snapper/issues/894 Fixes: 86211eea8ae1 ("btrfs: qgroup: validate btrfs_qgroup_inherit parameter") CC: stable@vger.kernel.org # 6.8+ Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2024-05-02Merge tag 'for-6.9-rc6-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: - set correct ram_bytes when splitting ordered extent. This can be inconsistent on-disk but harmless as it's not used for calculations and it's only advisory for compression - fix lockdep splat when taking cleaner mutex in qgroups disable ioctl - fix missing mutex unlock on error path when looking up sys chunk for relocation * tag 'for-6.9-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: set correct ram_bytes when splitting ordered extent btrfs: take the cleaner_mutex earlier in qgroup disable btrfs: add missing mutex_unlock in btrfs_relocate_sys_chunks()
generated by cgit (git 2.34.1) at 2025-09-13 03:21:06 +0000