| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Alexander Gordeev:
- The function __storage_key_init_range() expects the end address to be
the first byte outside the range to be initialized. Fix the callers
that provide the last byte within the range instead.
- 3270 Channel Command Word (CCW) may contain zero data address in case
there is no data in the request. Add data availability check to avoid
erroneous non-zero value as result of virt_to_dma32(NULL) application
in cases there is no data
- Add missing CFI directives for an unwinder to restore the return
address in the vDSO assembler code
- NUL-terminate kernel buffer when duplicating user space memory region
on Channel IO (CIO) debugfs write inject
- Fix wrong format string in zcrypt debug output
- Return -EBUSY code when a CCA card is temporarily unavailabile
- Restore a loop that retries derivation of a protected key from a
secure key in cases the low level reports temporarily unavailability
with -EBUSY code
* tag 's390-6.9-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/paes: Reestablish retry loop in paes
s390/zcrypt: Use EBUSY to indicate temp unavailability
s390/zcrypt: Handle ep11 cprb return code
s390/zcrypt: Fix wrong format string in debug feature printout
s390/cio: Ensure the copied buf is NUL terminated
s390/vdso: Add CFI for RA register to asm macro vdso_func
s390/3270: Fix buffer assignment
s390/mm: Fix clearing storage keys for huge pages
s390/mm: Fix storage key clearing for guest huge pages
|
|
Pull xtensa fixes from Max Filippov:
- fix unused variable warning caused by empty flush_dcache_page()
definition
- fix stack unwinding on windowed noMMU XIP configurations
- fix Coccinelle warning 'opportunity for min()' in xtensa ISS platform
code
* tag 'xtensa-20240502' of https://github.com/jcmvbkbc/linux-xtensa:
xtensa: remove redundant flush_dcache_page and ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE macros
tty: xtensa/iss: Use min() to fix Coccinelle warning
xtensa: fix MAKE_PC_FROM_RA second argument
|
|
With recent sanity checks for topology information added, there are now
warnings issued for APs when running as a Xen PV guest:
[Firmware Bug]: CPU 1: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0001
This is due to the initial APIC ID obtained via CPUID for PV guests is
always 0.
Avoid the warnings by synthesizing the CPUID data to contain the same
initial APIC ID as xen_pv_smp_config() is using for registering the
APIC IDs of all CPUs.
Fixes: 52128a7a21f7 ("86/cpu/topology: Make the APIC mismatch warnings complete")
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Update to commit 711cbfc71765 ("docs: rust: Clarify that 'rustup
override' applies to build directory")
commit 7583ce66ddf7 ("docs: rust: remove `CC=clang` mentions")
commit 2285eb2f2429 ("docs: rust: clarify what 'rustup override' does")
commit 8cb40124cf92 ("docs: rust: update instructions for obtaining
'core' source")
commit b603c6cc405a ("docs: rust: add command line to rust-analyzer
section")
commit 08ab786556ff ("rust: bindgen: upgrade to 0.65.1")
commit eae90172c5b8 ("docs: rust: add paragraph about finding a
suitable `libclang`")
commit 6883b29c6cae ("docs: rust: point directly to the standalone
installers")
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/aff560c262f255e873c07cc66891cf8140ad433d.1714113680.git.siyanteng@loongson.cn
|
|
Update to commit ba4abeb13d5e ("docs: rust: Move testing to a
separate page")
commit be412baf7240 ("docs: rust: Add rusttest info")
commit bd9e54a42ce2 ("docs: rust: update Rust docs output path")
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/09fc6c2e0553fb5fae9c91146e1bceb149b6cf71.1714113680.git.siyanteng@loongson.cn
|
|
Update to commit bc2e7d5c298a ("rust: support `srctree`-relative links")
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/e83b5dd929371d42889b19750e5e0385544e170f.1714113680.git.siyanteng@loongson.cn
|
|
Update to commit 81889e8523e6 ("RISC-V: enable building
64-bit kernels with rust support")
commit 01848eee20c6 ("docs: rust: fix improper rendering in
Arch Supportpage")
commit 724a75ac9542 ("arm64: rust: Enable Rust support
for AArch64")
commit 90868ff9cade ("LoongArch: Enable initial Rust support")
commit e5e86572e3f2 ("rust: sort uml documentation arch support table")
commit 04df97e150c8 ("Documentation: rust: Fix arch support table")
commit 0438aadfa69a ("rust: arch/um: Add support for CONFIG_RUST
under x86_64 UML")
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/e61eee747275c4e258416e079315b8e23fe3fde5.1714113680.git.siyanteng@loongson.cn
|
|
Change 'sent' to 'send'
Signed-off-by: Tim Bird <tim.bird@sony.com>
Link: https://lore.kernel.org/r/SA3PR13MB63726A746C847D7C0919C25BFD162@SA3PR13MB6372.namprd13.prod.outlook.com
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
The spaces on the left and right of texts should be consistent.
Remove these redundent spaces.
Signed-off-by: Dongliang Mu <dzm91@hust.edu.cn>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240427053703.2339727-1-dzm91@hust.edu.cn
|
|
As mentioned in "Assumption:", current grep expression can't catch
font files whose names are changed from upstream "Noto CJK fonts".
To avoid false negatives, use command of the form:
fc-list : file family variable
, where ":" works as a wildcard pattern.
Variable fonts can be detected by filtering the output with
"variable=True" and "Noto CJK" font-family variants.
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/c62ba2e6-c124-4e91-8011-cb1da408a3c5@gmail.com
|
|
Contrary to i915, in xe ADL-N is kept as a different platform, not a
subplatform of ADL-P. Since the display side doesn't need to
differentiate between P and N, i.e. IS_ALDERLAKE_P_N() is never called,
just fixup the compat header to check for both P and N.
Moving ADL-N to be a subplatform would be more complex as the firmware
loading in xe only handles platforms, not subplatforms, as going forward
the direction is to check on IP version rather than
platforms/subplatforms.
Fix warning when initializing display:
xe 0000:00:02.0: [drm:intel_pch_type [xe]] Found Alder Lake PCH
------------[ cut here ]------------
xe 0000:00:02.0: drm_WARN_ON(!((dev_priv)->info.platform == XE_ALDERLAKE_S) && !((dev_priv)->info.platform == XE_ALDERLAKE_P))
And wrong paths being taken on the display side.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240425181610.2704633-1-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 6a2a90cba12b42eb96c2af3426b77ceb4be31df2)
Fixes: 44e694958b95 ("drm/xe/display: Implement display support")
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Document a new variant of the stable tag developers can use to make the
stable team's tools ignore a change[1].
That way developers can use 'Fixes:' tags without fearing the changes
might be backported in semi-automatic fashion. Such concerns are the
reason why some developers deliberately omit the 'Fixes:' tag in
changes[2] -- which somewhat undermines the reason for the existence of
that tag and might be unwise in the long term[3].
Link: https://lore.kernel.org/all/b452fd54-fdc6-47e4-8c26-6627f6b7eff3@leemhuis.info/ [1]
Link: https://lore.kernel.org/all/cover.1712226175.git.antony.antony@secunet.com/ [2]
Link: https://lore.kernel.org/all/dfd87673-c581-4b4b-b37a-1cf5c817240d@leemhuis.info/ [3]
Signed-off-by: Thorsten Leemhuis <linux@leemhuis.info>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/35989d3b2f3f8cf23828b0c84fde9b17a74be97c.1714367921.git.linux@leemhuis.info
|
|
Document when to use of stable@kernel.org instead of
stable@vger.kernel.org, as the two are easily mixed up and their
difference not explained anywhere[1].
Link: https://lore.kernel.org/all/20240422231550.3cf5f723@sal.lan/ [1]
Signed-off-by: Thorsten Leemhuis <linux@leemhuis.info>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/6783b71da48aac5290756343f58591dc42da87bc.1714367921.git.linux@leemhuis.info
|
|
Remove the 'code-block:: none' labels and switch to the shorter '::' to
reduce noise.
Remove a unneeded level of indentation, as that reduces the chance that
readers have to scroll sideways in some of the code blocks.
No text changes. Rendered html output looks like before, except for the
different level of indentation.
CC: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Thorsten Leemhuis <linux@leemhuis.info>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/755afbeafc8e1457154cb4b30ff4397f34326679.1714367921.git.linux@leemhuis.info
|
|
Fine-tuning:
* s/Linus' tree/Linux mainline/, as mainline is the term used elsewhere
in the document.
* Provide a better example for the 'delayed backporting' case that uses
a fixed rather than a relative reference point, which makes it easier
to handle for the stable team.
Signed-off-by: Thorsten Leemhuis <linux@leemhuis.info>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/0a120573ea827aee12d45e7bd802ba85c09884da.1714367921.git.linux@leemhuis.info
|
|
Explain the general concept once in the intro to keep things somewhat
shorter in the individual points.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Thorsten Leemhuis <linux@leemhuis.info>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/106e21789e2bf02d174e1715b49cd4d30886d51f.1714367921.git.linux@leemhuis.info
|
|
Support of kprobes and kretprobes for riscv was introduced 3 years ago
by the following change:
commit c22b0bcb1dd0 ("riscv: Add kprobes supported")
Add riscv to the list of supported architectures.
Signed-off-by: Ivan Orlov <ivan.orlov@codethink.co.uk>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240429155735.68781-1-ivan.orlov@codethink.co.uk
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire fixes from Takashi Sakamoto:
"Two driver fixes:
- The firewire-ohci driver for 1394 OHCI hardware does not fill time
stamp for response packet when handling asynchronous transaction to
local destination. This brings an inconvenience that the response
packet is not equivalent between the transaction to local and
remote. It is fixed by fulfilling the time stamp with hardware
time. The fix should be applied to Linux kernel v6.5 or later as
well.
- The nosy driver for Texas Instruments TSB12LV21A (PCILynx) has
long-standing issue about the behaviour when user space application
passes less size of buffer than expected. It is fixed by returning
zero according to the convention of UNIX-like systems"
* tag 'firewire-fixes-6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: ohci: fulfill timestamp for some local asynchronous transaction
firewire: nosy: ensure user_length is taken into account when fetching packet contents
|
|
Fix spelling and grammar in Docs descriptions
Signed-off-by: Remington Brasga <rbrasga@uci.edu>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240429225527.2329-1-rbrasga@uci.edu
|
|
The topology core expects the boot APIC to be registered from earhy APIC
detection first and then again when the firmware tables are evaluated. This
is used for detecting the real BSP CPU on a kexec kernel.
The recent conversion of XEN/PV to register fake APIC IDs failed to
register the boot CPU APIC correctly as it only registers it once. This
causes the BSP detection mechanism to trigger wrongly:
CPU topo: Boot CPU APIC ID not the first enumerated APIC ID: 0 > 1
Additionally this results in one CPU being ignored.
Register the boot CPU APIC twice so that the XEN/PV fake enumeration
behaves like real firmware.
Reported-by: Juergen Gross <jgross@suse.com>
Fixes: e75307023466 ("x86/xen/smp_pv: Register fake APICs")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/87a5l8s2fg.ffs@tglx
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fixes from Rafael Wysocki:
"Fix a memory leak and a few locking issues (that may cause the kernel
to crash in principle if all goes wrong) in the thermal debug code
introduced during the 6.8 development cycle"
* tag 'thermal-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal/debugfs: Prevent use-after-free from occurring after cdev removal
thermal/debugfs: Fix two locking issues with thermal zone debug
thermal/debugfs: Free all thermal zone debug memory on zone removal
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bpf.
Relatively calm week, likely due to public holiday in most places. No
known outstanding regressions.
Current release - regressions:
- rxrpc: fix wrong alignmask in __page_frag_alloc_align()
- eth: e1000e: change usleep_range to udelay in PHY mdic access
Previous releases - regressions:
- gro: fix udp bad offset in socket lookup
- bpf: fix incorrect runtime stat for arm64
- tipc: fix UAF in error path
- netfs: fix a potential infinite loop in extract_user_to_sg()
- eth: ice: ensure the copied buf is NUL terminated
- eth: qeth: fix kernel panic after setting hsuid
Previous releases - always broken:
- bpf:
- verifier: prevent userspace memory access
- xdp: use flags field to disambiguate broadcast redirect
- bridge: fix multicast-to-unicast with fraglist GSO
- mptcp: ensure snd_nxt is properly initialized on connect
- nsh: fix outer header access in nsh_gso_segment().
- eth: bcmgenet: fix racing registers access
- eth: vxlan: fix stats counters.
Misc:
- a bunch of MAINTAINERS file updates"
* tag 'net-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (45 commits)
MAINTAINERS: mark MYRICOM MYRI-10G as Orphan
MAINTAINERS: remove Ariel Elior
net: gro: add flush check in udp_gro_receive_segment
net: gro: fix udp bad offset in socket lookup by adding {inner_}network_offset to napi_gro_cb
ipv4: Fix uninit-value access in __ip_make_skb()
s390/qeth: Fix kernel panic after setting hsuid
vxlan: Pull inner IP header in vxlan_rcv().
tipc: fix a possible memleak in tipc_buf_append
tipc: fix UAF in error path
rxrpc: Clients must accept conn from any address
net: core: reject skb_copy(_expand) for fraglist GSO skbs
net: bridge: fix multicast-to-unicast with fraglist GSO
mptcp: ensure snd_nxt is properly initialized on connect
e1000e: change usleep_range to udelay in PHY mdic access
net: dsa: mv88e6xxx: Fix number of databases for 88E6141 / 88E6341
cxgb4: Properly lock TX queue for the selftest.
rxrpc: Fix using alignmask being zero for __page_frag_alloc_align()
vxlan: Add missing VNI filter counter update in arp_reduce().
vxlan: Fix racy device stats updates.
net: qede: use return from qede_parse_actions()
...
|
|
Running "make htmldocs" on a newly installed Sphinx 7.3.7 ends up in
a build error:
Sphinx parallel build error:
AttributeError: module 'docutils.nodes' has no attribute 'reprunicode'
docutils 0.21 has removed nodes.reprunicode, quote from release note [1]:
* Removed objects:
docutils.nodes.reprunicode, docutils.nodes.ensure_str()
Python 2 compatibility hacks
Sphinx 7.3.0 supports docutils 0.21 [2]:
kernel_include.py, whose origin is misc.py of docutils, uses reprunicode.
Upstream docutils removed the offending line from the corresponding file
(docutils/docutils/parsers/rst/directives/misc.py) in January 2022.
Quoting the changelog [3]:
Deprecate `nodes.reprunicode` and `nodes.ensure_str()`.
Drop uses of the deprecated constructs (not required with Python 3).
Do the same for kernel_include.py.
Tested against:
- Sphinx 2.4.5 (docutils 0.17.1)
- Sphinx 3.4.3 (docutils 0.17.1)
- Sphinx 5.3.0 (docutils 0.18.1)
- Sphinx 6.2.1 (docutils 0.19)
- Sphinx 7.2.6 (docutils 0.20.1)
- Sphinx 7.3.7 (docutils 0.21.2)
Link: http://www.docutils.org/RELEASE-NOTES.html#release-0-21-2024-04-09 [1]
Link: https://www.sphinx-doc.org/en/master/changes.html#release-7-3-0-released-apr-16-2024 [2]
Link: https://github.com/docutils/docutils/commit/c8471ce47a24 [3]
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/faf5fa45-2a9d-4573-9d2e-3930bdc1ed65@gmail.com
|
|
Catch up the update made in commit e49ad8530de9 ("CREDITS, MAINTAINERS,
docs/process/howto: Update man-pages' maintainer").
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Cc: Tsugikazu Shibata <shibata@linuxfoundation.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240502085610.111739-1-akiyks@gmail.com
|
|
Translation for the following patches
commit 6e55b1cbf05d ("docs: try to encourage (netdev?) reviewers")
commit e49ad8530de9 ("CREDITS, MAINTAINERS, docs/process/howto: Update man-pages' maintainer")
commit 44ac5abac86b ("Documentation/security-bugs: move from admin-guide/ to process/")
commit 5a602de99797 ("Add .editorconfig file for basic formatting")
commit 129027b78c49 ("docs: deprecated.rst: Update an example")
commit efc0a7cfe9ec ("Docs/process/changes: Consolidate NFS-utils update links")
commit 383f30882197 ("Docs/process/changes: Replace http:// with https://")
commit 80fe9e51510b ("rust: upgrade to Rust 1.74.1")
commit c584476d477e ("doc: Add tar requirement to changes.rst")
commit b230235b3865 ("docs: Set minimal gtags / GNU GLOBAL version to 6.6.5")
commit 3e893e16af55 ("docs: Raise the minimum Sphinx requirement to 2.4.4")
commit 08ab786556ff ("rust: bindgen: upgrade to 0.65.1")
commit 185ea7676ef3 ("Documentation: coding-style: Update syntax highlighting for code-blocks")
commit 932be49b71e7 ("Documentation: coding-style: Fix indentation in code-blocks")
commit 5c7944ca7b13 ("coding-style: Add guidance to prefer dev_dbg")
commit c15ec3d1a287 ("Documentation: doc-guide: use '%' constant indicator in Return: examples")
commit 329ac9af902e ("docs: submitting-patches: Discuss interleaved replies")
commit 5382774515d4 ("(docs-next) A reworked process/index.rst")
Signed-off-by: Federico Vaga <federico.vaga@vaga.pv.it>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240316225400.22590-1-federico.vaga@vaga.pv.it
|
|
Several other "dup"-style interfaces could use the __realloc_size()
attribute. (As a reminder to myself and others: "realloc" is used here
instead of "alloc" because the "alloc_size" attribute implies that the
memory contents are uninitialized. Since we're copying contents into the
resulting allocation, it must use "realloc_size" to avoid confusing the
compiler's optimization passes.)
Add KUnit test coverage where possible. (KUnit still does not have the
ability to manipulate userspace memory.)
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20240502145218.it.729-kees@kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Change the implementation of the out-of-line __seq_puts() to simply be
a seq_write() call instead of duplicating the overflow/memcpy logic.
Suggested-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/7cebc1412d8d1338a7e52cc9291d00f5368c14e4.1713781332.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Most of seq_puts() usages are done with a string literal. In such cases,
the length of the string car be computed at compile time in order to save
a strlen() call at run-time. seq_putc() or seq_write() can then be used
instead.
This saves a few cycles.
To have an estimation of how often this optimization triggers:
$ git grep seq_puts.*\" | wc -l
3436
$ git grep seq_puts.*\".\" | wc -l
84
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/a8589bffe4830dafcb9111e22acf06603fea7132.1713781332.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Christian Brauner <brauner@kernel.org>
The output for seq_putc() generation has also be checked and works.
|
|
If the same size kmalloc cache already exists, it should not be created
again. So there is the check for NULL kmalloc_caches before calling the
kmalloc creation function. However, new_kmalloc_cache() itself checks NULL
kmalloc_cahces before cache creation. Therefore, the NULL check is not
necessary in this function.
Signed-off-by: Hyunmin Lee <hyunminlr@gmail.com>
Co-developed-by: Jeungwoo Yoo <casionwoo@gmail.com>
Signed-off-by: Jeungwoo Yoo <casionwoo@gmail.com>
Co-developed-by: Sangyun Kim <sangyun.kim@snu.ac.kr>
Signed-off-by: Sangyun Kim <sangyun.kim@snu.ac.kr>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Christoph Lameter <cl@linux.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
For SLAB the kmalloc caches needed to be created in ascending sizes in
order. However, the constraint is not necessary anymore because SLAB has
been removed and SLUB doesn't need to comply with the constraint. Thus,
kmalloc 96 and 192 caches can be created after the other size kmalloc
caches are created instead of checking every time to find their order to
be created. Also, this change could prevent engineers from being confused
by the removed constraint.
Signed-off-by: Hyunmin Lee <hyunminlr@gmail.com>
Co-developed-by: Jeungwoo Yoo <casionwoo@gmail.com>
Signed-off-by: Jeungwoo Yoo <casionwoo@gmail.com>
Co-developed-by: Sangyun Kim <sangyun.kim@snu.ac.kr>
Signed-off-by: Sangyun Kim <sangyun.kim@snu.ac.kr>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Christoph Lameter <cl@linux.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
git://git.infradead.org/nvme into block-6.9
Pull NVMe fixes from Keith.
* git://git.infradead.org/nvme:
nvme-tcp: strict pdu pacing to avoid send stalls on TLS
nvmet: fix nvme status code when namespace is disabled
nvmet-tcp: fix possible memory leak when tearing down a controller
nvme: cancel pending I/O if nvme controller is in terminal state
nvmet-auth: replace pr_debug() with pr_err() to report an error.
nvmet-auth: return the error code to the nvmet_auth_host_hash() callers
nvme: find numa distance only if controller has valid numa id
nvme: fix warn output about shared namespaces without CONFIG_NVME_MULTIPATH
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/drivers
TI SoC driver updates for v6.10
Generic Cleanups/Fixes:
- wkup_m3_ipc: Minor optimization to send NULL dummy message instead of empty pointer message
- ti_sci: Register restart handler unconditionally
* tag 'ti-driver-soc-for-v6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux:
soc: ti: wkup_m3_ipc: Send NULL dummy message instead of pointer message
firmware: ti_sci: Unconditionally register reset handler
firmware: ti_sci: Use devm_register_restart_handler()
Link: https://lore.kernel.org/r/20240501124300.i5jzeugdlrlnfg22@undrafted
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/dt
TI K3 device tree updates for v6.10
Generic Cleanups/Fixes:
- fixup of generated dtb imx219 overlay file names
- Remove UART baud rate selection in device tree.
- Use exact ranges for FSS.
SoC specific Fixes/Features:
AM625:
- Add USB PHY2 region and usb phy control registers
AM62A
- Add USB PHY2 region and usb phy control registers, Disable USB LPM.
- Add wave-512 video encoder/decoder support
- Enable UHS mode for SD
AM62P:
- Disable ethernet by default
- Add USB support
AM654
- Serdes fixups
- SDHCI fixups.
AM67/j722s:
- Disable ethernet by default
- Add USB support
AM68/J721s2:
- Add main ESM range
- Add support for SDR104
AM69/J784S4:
- Add main ESM range
- Enable support for UHS mode
Board specific fixes/Features:
AM625:
- BeaglePlay: Fixes for wlan mmc-pwrseq and ethernet phy reset
- phyboard-lyra: Add Audio codec, USB-C, increase CAN bit rate and enable
ability to apply overlays
- verdin: GPIO pinctrl fixups, Switch SD carddetect to GPIO, fixup memory
to 2GB, and audio clock, PCIe reset GPIO hog, sleep-moci
- lp-sk: Drop power button
- sk: minor white space cleanup.
AM64
- phyboard-electra: Increase CAN bit rate, enable overlay to enable GPIO fan
AM65:
- iot2050: Add icssg-prueth for PG1
AM67/j722s:
- evm: Enable UHS support for SD card and eMMC support.
AM69/J784s4:
- evm/sk: Fix uart pins and pinctrl macro usage.
* tag 'ti-k3-dt-for-v6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: (48 commits)
arm64: dts: ti: Fix csi2-dual-imx219 dtb names
arm64: dts: ti: k3-am625-beagleplay: Fix Ethernet PHY RESET GPIOs
arm64: dts: ti: k3-am625-phyboard-lyra-rdk: Add USB-C
arm64: dts: ti: k3-j784s4: Add main esm address range
arm64: dts: ti: k3-j721s2: Add main esm address range
arm64: dts: ti: k3-am62-verdin-dahlia: support sleep-moci
arm64: dts: ti: k3-am62-verdin: replace sleep-moci hog with regulator
arm64: dts: ti: k3-j722s-evm: Enable UHS support for MMCSD
arm64: dts: ti: k3-j784s4-main: Enable support for UHS mode
arm64: dts: ti: k3-j721s2-main: Enable support for SDR104 speed mode
arm64: dts: ti: k3-am62a: Enable UHS mode support for SD cards
arm64: dts: ti: k3-am65-main: Remove unused properties in sdhci nodes
arm64: dts: ti: k3-am65-main: Fix sdhci node properties
arm64: dts: ti: Enable overlays for the am625-phyboard-lyra
arm64: dts: ti: am64-phyboard-electra: Add overlay to enable a GPIO fan
arm64: dts: ti: k3-am62a-main: Add Wave5 Video Encoder/Decoder Node
arm64: dts: ti: k3-am69-sk: Fix UART pin type and macro type
arm64: dts: ti: k3-j784s4-evm: Fix UART pin type and macro type
arm64: dts: ti: k3-am62a: Disable USB LPM
arm64: dts: ti: k3-am62p: add the USB sub-system
...
Link: https://lore.kernel.org/r/20240501124319.ake5j2oc5pbnn5nb@contour
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/dt
Keystone2 device tree updates for v6.10
Generic Cleanups/Fixes:
- Remove custom ti,system-reboot-controller property
* tag 'ti-keystone-dt-for-v6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux:
dt-bindings: arm: keystone: Remove ti,system-reboot-controller property
ARM: dts: ti: keystone: k2g: Remove ti,system-reboot-controller property
Link: https://lore.kernel.org/r/20240501124309.3cj5b3gjf3cpimut@outsell
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Using restricted DMA pools (CONFIG_DMA_RESTRICTED_POOL=y) in conjunction
with dynamic SWIOTLB (CONFIG_SWIOTLB_DYNAMIC=y) leads to the following
crash when initialising the restricted pools at boot-time:
| Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008
| Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP
| pc : rmem_swiotlb_device_init+0xfc/0x1ec
| lr : rmem_swiotlb_device_init+0xf0/0x1ec
| Call trace:
| rmem_swiotlb_device_init+0xfc/0x1ec
| of_reserved_mem_device_init_by_idx+0x18c/0x238
| of_dma_configure_id+0x31c/0x33c
| platform_dma_configure+0x34/0x80
faddr2line reveals that the crash is in the list validation code:
include/linux/list.h:83
include/linux/rculist.h:79
include/linux/rculist.h:106
kernel/dma/swiotlb.c:306
kernel/dma/swiotlb.c:1695
because add_mem_pool() is trying to list_add_rcu() to a NULL
'mem->pools'.
Fix the crash by initialising the 'mem->pools' list_head in
rmem_swiotlb_device_init() before calling add_mem_pool().
Reported-by: Nikita Ioffe <ioffe@google.com>
Tested-by: Nikita Ioffe <ioffe@google.com>
Fixes: 1aaa736815eb ("swiotlb: allocate a new memory pool when existing pools are full")
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
into soc/dt
RISC-V Devicetrees for v6.10
Sophgo:
Added sdhci support for cv18xx/duo.
Added clock support for cv18xx.
Added clock for uart/sdhci.
Added spi support for cv18xx.
Added i2c support for cv18xx.
Added reserved memory node for cv1800b/duo.
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
* tag 'riscv-sophgo-dt-for-v6.10' of https://github.com/sophgo/linux:
riscv: dts: sophgo: add reserved memory node for CV1800B
riscv: dts: sophgo: use real clock for sdhci
riscv: dts: sophgo: cv18xx: Add i2c devices
riscv: dts: sophgo: cv18xx: Add spi devices
riscv: dts: sophgo: add uart clock for Sophgo CV1800 series SoC
riscv: dts: sophgo: add clock generator for Sophgo CV1800 series SoC
riscv: dts: sophgo: add sdcard support for milkv duo
Link: https://lore.kernel.org/r/MA0P287MB2822CA2DE757787D6EA3B1F8FE192@MA0P287MB2822.INDP287.PROD.OUTLOOK.COM
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
'/memory' nodes always have a 'reg' property, and therefore should have
a unit-address with just plain hex (i.e. no commas). Fix all the arm64
'/memory' nodes.
It's possible that some bootloader depends on /memory (arm32 ATAG to DT
code does for example). If so, the memory node should be commented with
that requirement.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Chanho Min <chanho.min@lge.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240430191856.874600-2-robh@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
In deactivate_slab(), slab->freelist can be changed concurrently. Mark
data race on slab->freelist as benign using READ_ONCE.
This patch is aimed at reducing the number of benign races reported by
KCSAN in order to focus future debugging effort on harmful races.
Signed-off-by: linke li <lilinke99@qq.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
The following commits loosened the permissions of /proc/<PID>/fdinfo/
directory, as well as the files within it, from 0500 to 0555 while also
introducing a PTRACE_MODE_READ check between the current task and
<PID>'s task:
- commit 7bc3fa0172a4 ("procfs: allow reading fdinfo with PTRACE_MODE_READ")
- commit 1927e498aee1 ("procfs: prevent unprivileged processes accessing fdinfo dir")
Before those changes, inode based system calls like inotify_add_watch(2)
would fail when the current task didn't have sufficient read permissions:
[...]
lstat("/proc/1/task/1/fdinfo", {st_mode=S_IFDIR|0500, st_size=0, ...}) = 0
inotify_add_watch(64, "/proc/1/task/1/fdinfo",
IN_MODIFY|IN_ATTRIB|IN_MOVED_FROM|IN_MOVED_TO|IN_CREATE|IN_DELETE|
IN_ONLYDIR|IN_DONT_FOLLOW|IN_EXCL_UNLINK) = -1 EACCES (Permission denied)
[...]
This matches the documented behavior in the inotify_add_watch(2) man
page:
ERRORS
EACCES Read access to the given file is not permitted.
After those changes, inotify_add_watch(2) started succeeding despite the
current task not having PTRACE_MODE_READ privileges on the target task:
[...]
lstat("/proc/1/task/1/fdinfo", {st_mode=S_IFDIR|0555, st_size=0, ...}) = 0
inotify_add_watch(64, "/proc/1/task/1/fdinfo",
IN_MODIFY|IN_ATTRIB|IN_MOVED_FROM|IN_MOVED_TO|IN_CREATE|IN_DELETE|
IN_ONLYDIR|IN_DONT_FOLLOW|IN_EXCL_UNLINK) = 1757
openat(AT_FDCWD, "/proc/1/task/1/fdinfo",
O_RDONLY|O_NONBLOCK|O_CLOEXEC|O_DIRECTORY) = -1 EACCES (Permission denied)
[...]
This change in behavior broke .NET prior to v7. See the github link
below for the v7 commit that inadvertently/quietly (?) fixed .NET after
the kernel changes mentioned above.
Return to the old behavior by moving the PTRACE_MODE_READ check out of
the file .open operation and into the inode .permission operation:
[...]
lstat("/proc/1/task/1/fdinfo", {st_mode=S_IFDIR|0555, st_size=0, ...}) = 0
inotify_add_watch(64, "/proc/1/task/1/fdinfo",
IN_MODIFY|IN_ATTRIB|IN_MOVED_FROM|IN_MOVED_TO|IN_CREATE|IN_DELETE|
IN_ONLYDIR|IN_DONT_FOLLOW|IN_EXCL_UNLINK) = -1 EACCES (Permission denied)
[...]
Reported-by: Kevin Parsons (Microsoft) <parsonskev@gmail.com>
Link: https://github.com/dotnet/runtime/commit/89e5469ac591b82d38510fe7de98346cce74ad4f
Link: https://stackoverflow.com/questions/75379065/start-self-contained-net6-build-exe-as-service-on-raspbian-system-unauthorizeda
Fixes: 7bc3fa0172a4 ("procfs: allow reading fdinfo with PTRACE_MODE_READ")
Cc: stable@vger.kernel.org
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christian König <christian.koenig@amd.com>
Cc: Jann Horn <jannh@google.com>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Hardik Garg <hargar@linux.microsoft.com>
Cc: Allen Pais <apais@linux.microsoft.com>
Signed-off-by: Tyler Hicks (Microsoft) <code@tyhicks.com>
Link: https://lore.kernel.org/r/20240501005646.745089-1-code@tyhicks.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Chris's email address bounces and lore hasn't seen an email
from anyone with his name for almost a decade.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240430233532.1356982-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
aelior@marvell.com bounces, we haven't seen Ariel on lore
since March 2022.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20240430233305.1356105-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull cifs netfs updates from David Howells:
This ports cifs over to use the netfs library.
* 'cifs-netfs' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
cifs: Enable large folio support
cifs: Remove some code that's no longer used, part 3
cifs: Remove some code that's no longer used, part 2
cifs: Remove some code that's no longer used, part 1
cifs: Cut over to using netfslib
cifs: Implement netfslib hooks
cifs: Make add_credits_and_wake_if() clear deducted credits
cifs: Add mempools for cifs_io_request and cifs_io_subrequest structs
cifs: Set zero_point in the copy_file_range() and remap_file_range()
cifs: Move cifs_loose_read_iter() and cifs_file_write_iter() to file.c
cifs: Replace the writedata replay bool with a netfs sreq flag
cifs: Make wait_mtu_credits take size_t args
cifs: Use more fields from netfs_io_subrequest
cifs: Replace cifs_writedata with a wrapper around netfs_io_subrequest
cifs: Replace cifs_readdata with a wrapper around netfs_io_subrequest
cifs: Use alternative invalidation to using launder_folio
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull netfs writeback updates from David Howells:
The primary purpose of these patches is to rework the netfslib writeback
implementation such that pages read from the cache are written to the cache
through ->writepages(), thereby allowing the fscache page flag to be
retired.
The reworking also:
(1) builds on top of the new writeback_iter() infrastructure;
(2) makes it possible to use vectored write RPCs as discontiguous streams
of pages can be accommodated;
(3) makes it easier to do simultaneous content crypto and stream division.
(4) provides support for retrying writes and re-dividing a stream;
(5) replaces the ->launder_folio() op, so that ->writepages() is used
instead;
(6) uses mempools to allocate the netfs_io_request and netfs_io_subrequest
structs to avoid allocation failure in the writeback path.
Some code that uses the fscache page flag is retained for compatibility
purposes with nfs and ceph. The code is switched to using the synonymous
private_2 label instead and marked with deprecation comments. I have a
separate set of patches that convert cifs to use this code.
-~-
In this new implementation, writeback_iter() is used to pump folios,
progressively creating two parallel, but separate streams. Either or both
streams can contain gaps, and the subrequests in each stream can be of
variable size, don't need to align with each other and don't need to align
with the folios. (Note that more streams can be added if we have multiple
servers to duplicate data to).
Indeed, subrequests can cross folio boundaries, may cover several folios or
a folio may be spanned by multiple subrequests, e.g.:
+---+---+-----+-----+---+----------+
Folios: | | | | | | |
+---+---+-----+-----+---+----------+
+------+------+ +----+----+
Upload: | | |.....| | |
+------+------+ +----+----+
+------+------+------+------+------+
Cache: | | | | | |
+------+------+------+------+------+
Data that got read from the server that needs copying to the cache is
stored in folios that are marked dirty and have folio->private set to a
special value.
The progressive subrequest construction permits the algorithm to be
preparing both the next upload to the server and the next write to the
cache whilst the previous ones are already in progress. Throttling can be
applied to control the rate of production of subrequests - and, in any
case, we probably want to write them to the server in ascending order,
particularly if the file will be extended.
Content crypto can also be prepared at the same time as the subrequests and
run asynchronously, with the prepped requests being stalled until the
crypto catches up with them. This might also be useful for transport
crypto, but that happens at a lower layer, so probably would be harder to
pull off.
The algorithm is split into three parts:
(1) The issuer. This walks through the data, packaging it up, encrypting
it and creating subrequests. The part of this that generates
subrequests only deals with file positions and spans and so is usable
for DIO/unbuffered writes as well as buffered writes.
(2) The collector. This asynchronously collects completed subrequests,
unlocks folios, frees crypto buffers and performs any retries. This
runs in a work queue so that the issuer can return to the caller for
writeback (so that the VM can have its kswapd thread back) or async
writes.
Collection is slightly complex as the collector has to work out where
discontiguities happen in the folio list so that it doesn't try and
collect folios that weren't included in the write out.
(3) The retryer. This pauses the issuer, waits for all outstanding
subrequests to complete and then goes through the failed subrequests
to reissue them. This may involve reprepping them (with cifs, the
credits must be renegotiated and a subrequest may need splitting), and
doing RMW for content crypto if there's a conflicting change on the
server.
* 'netfs-writeback' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: (22 commits)
netfs, afs: Use writeback retry to deal with alternate keys
netfs: Miscellaneous tidy ups
netfs: Remove the old writeback code
netfs: Cut over to using new writeback code
netfs, cachefiles: Implement helpers for new write code
netfs, 9p: Implement helpers for new write code
netfs, afs: Implement helpers for new write code
netfs: Add some write-side stats and clean up some stat names
netfs: New writeback implementation
netfs: Switch to using unsigned long long rather than loff_t
mm: Export writeback_iter()
netfs: Use mempools for allocating requests and subrequests
netfs: Remove ->launder_folio() support
afs: Use alternative invalidation to using launder_folio
9p: Use alternative invalidation to using launder_folio
mm: Provide a means of invalidation without using launder_folio
netfs: Use subreq_counter to allocate subreq debug_index values
netfs: Make netfs_io_request::subreq_counter an atomic_t
netfs: Remove deprecated use of PG_private_2 as a second writeback flag
mm: Remove the PG_fscache alias for PG_private_2
...
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Richard Gobert says:
====================
net: gro: add flush/flush_id checks and fix wrong offset in udp
This series fixes a bug in the complete phase of UDP in GRO, in which
socket lookup fails due to using network_header when parsing encapsulated
packets. The fix is to add network_offset and inner_network_offset to
napi_gro_cb and use these offsets for socket lookup.
In addition p->flush/flush_id should be checked in all UDP flows. The
same logic from tcp_gro_receive is applied for all flows in
udp_gro_receive_segment. This prevents packets with mismatching network
headers (flush/flush_id turned on) from merging in UDP GRO.
The original series includes a change to vxlan test which adds the local
parameter to prevent similar future bugs. I plan to submit it separately to
net-next.
This series is part of a previously submitted series to net-next:
https://lore.kernel.org/all/20240408141720.98832-1-richardbgobert@gmail.com/
v3 -> v4:
- Store network offsets, and use them only in udp_gro_complete flows
- Correct commit hash used in Fixes tag
- v3:
https://lore.kernel.org/netdev/20240424163045.123528-1-richardbgobert@gmail.com/
v2 -> v3:
- Add network_offsets and fix udp bug in a single commit to make backporting easier
- Write to inner_network_offset in {inet,ipv6}_gro_receive
- Use network_offsets union in tcp[46]_gro_complete as well
- v2:
https://lore.kernel.org/netdev/20240419153542.121087-1-richardbgobert@gmail.com/
v1 -> v2:
- Use network_offsets instead of p_poff param as suggested by Willem
- Check flush before postpull, and for all UDP GRO flows
- v1:
https://lore.kernel.org/netdev/20240412152120.115067-1-richardbgobert@gmail.com/
====================
Link: https://lore.kernel.org/r/20240430143555.126083-1-richardbgobert@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
GRO-GSO path is supposed to be transparent and as such L3 flush checks are
relevant to all UDP flows merging in GRO. This patch uses the same logic
and code from tcp_gro_receive, terminating merge if flush is non zero.
Fixes: e20cf8d3f1f7 ("udp: implement GRO for plain UDP sockets.")
Signed-off-by: Richard Gobert <richardbgobert@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
{inner_}network_offset to napi_gro_cb
Commits a602456 ("udp: Add GRO functions to UDP socket") and 57c67ff ("udp:
additional GRO support") introduce incorrect usage of {ip,ipv6}_hdr in the
complete phase of gro. The functions always return skb->network_header,
which in the case of encapsulated packets at the gro complete phase, is
always set to the innermost L3 of the packet. That means that calling
{ip,ipv6}_hdr for skbs which completed the GRO receive phase (both in
gro_list and *_gro_complete) when parsing an encapsulated packet's _outer_
L3/L4 may return an unexpected value.
This incorrect usage leads to a bug in GRO's UDP socket lookup.
udp{4,6}_lib_lookup_skb functions use ip_hdr/ipv6_hdr respectively. These
*_hdr functions return network_header which will point to the innermost L3,
resulting in the wrong offset being used in __udp{4,6}_lib_lookup with
encapsulated packets.
This patch adds network_offset and inner_network_offset to napi_gro_cb, and
makes sure both are set correctly.
To fix the issue, network_offsets union is used inside napi_gro_cb, in
which both the outer and the inner network offsets are saved.
Reproduction example:
Endpoint configuration example (fou + local address bind)
# ip fou add port 6666 ipproto 4
# ip link add name tun1 type ipip remote 2.2.2.1 local 2.2.2.2 encap fou encap-dport 5555 encap-sport 6666 mode ipip
# ip link set tun1 up
# ip a add 1.1.1.2/24 dev tun1
Netperf TCP_STREAM result on net-next before patch is applied:
net-next main, GRO enabled:
$ netperf -H 1.1.1.2 -t TCP_STREAM -l 5
Recv Send Send
Socket Socket Message Elapsed
Size Size Size Time Throughput
bytes bytes bytes secs. 10^6bits/sec
131072 16384 16384 5.28 2.37
net-next main, GRO disabled:
$ netperf -H 1.1.1.2 -t TCP_STREAM -l 5
Recv Send Send
Socket Socket Message Elapsed
Size Size Size Time Throughput
bytes bytes bytes secs. 10^6bits/sec
131072 16384 16384 5.01 2745.06
patch applied, GRO enabled:
$ netperf -H 1.1.1.2 -t TCP_STREAM -l 5
Recv Send Send
Socket Socket Message Elapsed
Size Size Size Time Throughput
bytes bytes bytes secs. 10^6bits/sec
131072 16384 16384 5.01 2877.38
Fixes: a6024562ffd7 ("udp: Add GRO functions to UDP socket")
Signed-off-by: Richard Gobert <richardbgobert@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
KMSAN reported uninit-value access in __ip_make_skb() [1]. __ip_make_skb()
tests HDRINCL to know if the skb has icmphdr. However, HDRINCL can cause a
race condition. If calling setsockopt(2) with IP_HDRINCL changes HDRINCL
while __ip_make_skb() is running, the function will access icmphdr in the
skb even if it is not included. This causes the issue reported by KMSAN.
Check FLOWI_FLAG_KNOWN_NH on fl4->flowi4_flags instead of testing HDRINCL
on the socket.
Also, fl4->fl4_icmp_type and fl4->fl4_icmp_code are not initialized. These
are union in struct flowi4 and are implicitly initialized by
flowi4_init_output(), but we should not rely on specific union layout.
Initialize these explicitly in raw_sendmsg().
[1]
BUG: KMSAN: uninit-value in __ip_make_skb+0x2b74/0x2d20 net/ipv4/ip_output.c:1481
__ip_make_skb+0x2b74/0x2d20 net/ipv4/ip_output.c:1481
ip_finish_skb include/net/ip.h:243 [inline]
ip_push_pending_frames+0x4c/0x5c0 net/ipv4/ip_output.c:1508
raw_sendmsg+0x2381/0x2690 net/ipv4/raw.c:654
inet_sendmsg+0x27b/0x2a0 net/ipv4/af_inet.c:851
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x274/0x3c0 net/socket.c:745
__sys_sendto+0x62c/0x7b0 net/socket.c:2191
__do_sys_sendto net/socket.c:2203 [inline]
__se_sys_sendto net/socket.c:2199 [inline]
__x64_sys_sendto+0x130/0x200 net/socket.c:2199
do_syscall_64+0xd8/0x1f0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x6d/0x75
Uninit was created at:
slab_post_alloc_hook mm/slub.c:3804 [inline]
slab_alloc_node mm/slub.c:3845 [inline]
kmem_cache_alloc_node+0x5f6/0xc50 mm/slub.c:3888
kmalloc_reserve+0x13c/0x4a0 net/core/skbuff.c:577
__alloc_skb+0x35a/0x7c0 net/core/skbuff.c:668
alloc_skb include/linux/skbuff.h:1318 [inline]
__ip_append_data+0x49ab/0x68c0 net/ipv4/ip_output.c:1128
ip_append_data+0x1e7/0x260 net/ipv4/ip_output.c:1365
raw_sendmsg+0x22b1/0x2690 net/ipv4/raw.c:648
inet_sendmsg+0x27b/0x2a0 net/ipv4/af_inet.c:851
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x274/0x3c0 net/socket.c:745
__sys_sendto+0x62c/0x7b0 net/socket.c:2191
__do_sys_sendto net/socket.c:2203 [inline]
__se_sys_sendto net/socket.c:2199 [inline]
__x64_sys_sendto+0x130/0x200 net/socket.c:2199
do_syscall_64+0xd8/0x1f0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x6d/0x75
CPU: 1 PID: 15709 Comm: syz-executor.7 Not tainted 6.8.0-11567-gb3603fcb79b1 #25
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-1.fc39 04/01/2014
Fixes: 99e5acae193e ("ipv4: Fix potential uninit variable access bug in __ip_make_skb()")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Link: https://lore.kernel.org/r/20240430123945.2057348-1-syoshida@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
KVM allows issuing the KVM_CHECK_EXTENSION ioctl either on the /dev/kvm
fd or the VM fd. In the first case, kvm_vm_ioctl_check_extension() is
called with kvm==NULL. Ensure we don't dereference the pointer in that
case.
Fixes: 40ebdb8e59df ("KVM: s390: Make huge pages unavailable in ucontrol VMs")
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Message-ID: <20240419160723.320910-2-jean-philippe@linaro.org>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
|
|
In one case the -1 is returned which is quite confusing code for
the wrong device ID, in another the ret is returning instead of
plain 0 that also confusing as readed may ask the possible meaning
of positive codes, which are never the case there. Convert both
to use explicit predefined error codes to make it clear what's going
on there.
Fixes: 5a04227326b0 ("drm/panel: Add ilitek ili9341 panel driver")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Link: https://lore.kernel.org/r/20240425142706.2440113-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240425142706.2440113-4-andriy.shevchenko@linux.intel.com
|
|
GPIO controller might not be available when driver is being probed.
There are plenty of reasons why, one of which is deferred probe.
Since GPIOs are optional, return any error code we got to the upper
layer, including deferred probe. With that in mind, use dev_err_probe()
in order to avoid spamming the logs.
Fixes: 5a04227326b0 ("drm/panel: Add ilitek ili9341 panel driver")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Link: https://lore.kernel.org/r/20240425142706.2440113-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240425142706.2440113-3-andriy.shevchenko@linux.intel.com
|
