summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-07-12ubifs: fix kernel-doc warningsJeff Johnson
make C=1 reports the following kernel-doc warnings: fs/ubifs/compress.c:103: warning: Function parameter or struct member 'c' not described in 'ubifs_compress' fs/ubifs/compress.c:155: warning: Function parameter or struct member 'c' not described in 'ubifs_decompress' fs/ubifs/find.c:353: warning: Excess function parameter 'data' description in 'scan_for_free_cb' fs/ubifs/find.c:353: warning: Function parameter or struct member 'arg' not described in 'scan_for_free_cb' fs/ubifs/find.c:594: warning: Excess function parameter 'data' description in 'scan_for_idx_cb' fs/ubifs/find.c:594: warning: Function parameter or struct member 'arg' not described in 'scan_for_idx_cb' fs/ubifs/find.c:786: warning: Excess function parameter 'data' description in 'scan_dirty_idx_cb' fs/ubifs/find.c:786: warning: Function parameter or struct member 'arg' not described in 'scan_dirty_idx_cb' fs/ubifs/find.c:86: warning: Excess function parameter 'data' description in 'scan_for_dirty_cb' fs/ubifs/find.c:86: warning: Function parameter or struct member 'arg' not described in 'scan_for_dirty_cb' fs/ubifs/journal.c:369: warning: expecting prototype for wake_up_reservation(). Prototype was for add_or_start_queue() instead fs/ubifs/lprops.c:1018: warning: Excess function parameter 'lst' description in 'scan_check_cb' fs/ubifs/lprops.c:1018: warning: Function parameter or struct member 'arg' not described in 'scan_check_cb' fs/ubifs/lpt.c:1938: warning: Function parameter or struct member 'ptr' not described in 'lpt_scan_node' fs/ubifs/replay.c:60: warning: Function parameter or struct member 'hash' not described in 'replay_entry' Fix them. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2024-07-12ubifs: correct UBIFS_DFS_DIR_LEN macro definition and improve code clarityZhaoLong Wang
The UBIFS_DFS_DIR_LEN macro, which defines the maximum length of the UBIFS debugfs directory name, has an incorrect formula and misleading comments. The current formula is (3 + 1 + 2*2 + 1), which assumes that both UBI device number and volume ID are limited to 2 characters. However, UBI device number ranges from 0 to 31 (2 characters), and volume ID ranges from 0 to 127 (up to 3 characters). Although the current code works due to the cancellation of mathematical errors (9 + 1 = 10, which matches the correct UBIFS_DFS_DIR_LEN value), it can lead to confusion and potential issues in the future. This patch aims to improve the code clarity and maintainability by making the following changes: 1. Corrects the UBIFS_DFS_DIR_LEN macro definition to (3 + 1 + 2 + 3 + 1), accommodating the maximum lengths of both UBI device number and volume ID, plus the separators and null terminator. 2. Updates the snprintf calls to use UBIFS_DFS_DIR_LEN instead of UBIFS_DFS_DIR_LEN + 1, removing the unnecessary +1. 3. Modifies the error checks to compare against UBIFS_DFS_DIR_LEN using >= instead of >, aligning with the corrected macro definition. 4. Removes the redundant +1 in the dfs_dir_name array definitions in ubi.h and debug.h. While these changes do not affect the runtime behavior, they make the code more readable, maintainable, and less prone to future errors. v2->v3: - Removes the duplicated UBIFS_DFS_DIR_LEN and UBIFS_DFS_DIR_NAME macro definitions in ubifs.h, as they are already defined in debug.h. Signed-off-by: ZhaoLong Wang <wangzhaolong1@huawei.com> Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2024-07-12mtd: ubi: Restore missing cleanup on ubi_init() failure pathBen Hutchings
We need to clean-up debugfs and ubiblock if we fail after initialising them. Signed-off-by: Ben Hutchings <ben.hutchings@mind.be> Fixes: 927c145208b0 ("mtd: ubi: attach from device tree") Signed-off-by: Richard Weinberger <richard@nod.at>
2024-07-12ubifs: dbg_orphan_check: Fix missed key type checkingZhihao Cheng
When selinux/encryption is enabled, xattr entry node is added into TNC before host inode when creating new file. So it is possible to find xattr entry without host inode from TNC. Orphan debug checking is called by ubifs_orphan_end_commit(), at that time, the commit semaphore is already unlock, so the new creation won't be blocked. Fixes: d7f0b70d30ff ("UBIFS: Add security.* XATTR support for the UBIFS") Fixes: d475a507457b ("ubifs: Add skeleton for fscrypto") Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2024-07-12ubifs: Fix unattached inode when powercut happens in creatingZhihao Cheng
For selinux or encryption scenarios, UBIFS could become inconsistent while creating new files in powercut case. Encryption/selinux related xattrs will be created before creating file dentry, which makes creation process is not atomic, details are shown as: Encryption case: ubifs_create ubifs_new_inode fscrypt_set_context ubifs_xattr_set create_xattr ubifs_jnl_update // Disk: xentry xinode inode(LAST_OF_NODE_GROUP) >> power cut << ubifs_jnl_update // Disk: dentry inode parent_inode(LAST_OF_NODE_GROUP) Selinux case: ubifs_create ubifs_new_inode ubifs_init_security security_inode_init_security ubifs_xattr_set create_xattr ubifs_jnl_update // Disk: xentry xinode inode(LAST_OF_NODE_GROUP) >> power cut << ubifs_jnl_update // Disk: dentry inode parent_inode(LAST_OF_NODE_GROUP) Above process will make chk_fs failed in next mounting: UBIFS error (ubi0:0 pid 7995): dbg_check_filesystem [ubifs]: inode 66 nlink is 1, but calculated nlink is 0 Fix it by allocating orphan inode for each non-xattr file creation, then removing orphan list in journal writing process, which ensures that both xattr and dentry be effective in atomic when powercut happens. Fixes: d7f0b70d30ff ("UBIFS: Add security.* XATTR support for the UBIFS") Fixes: d475a507457b ("ubifs: Add skeleton for fscrypto") Link: https://bugzilla.kernel.org/show_bug.cgi?id=218309 Suggested-by: Zhang Yi <yi.zhang@huawei.com> Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2024-07-12ubifs: Fix space leak when powercut happens in linking tmpfileZhihao Cheng
There is a potential space leak problem when powercut happens in linking tmpfile, in which case, inode node (with nlink=0) and its' data nodes can be found from tnc (on flash), but there are no dentries related to the inode, so the file is invisible but takes free space. Detailed process is shown as: ubifs_tmpfile ubifs_jnl_update // Add bud A into log area ubifs_add_orphan // Add inode into orphan list P1 P2 ubifs_link ubifs_delete_orphan // Delete inode from orphan list, then inode won't // be written into orphan area, there is no chance // to delete inode by replaying orphan. commit // bud A won't be replayed in next mounting >> powercut << ubifs_jnl_update // Link inode to dentry The root cause is that orphan entry deletion and journal writing(for link) are interrupted by commit, which makes the two operations are not atomic. Fix it by doing ubifs_delete_orphan under the protection of c->commit_sem within ubifs_jnl_update. This is also a preparation to support all creating new files by orphan inode. v1 is https://lore.kernel.org/linux-mtd/20200701093227.674945-1-chengzhihao1@huawei.com/ Fixes: 32fe905c17f0 ("ubifs: Fix O_TMPFILE corner case in ubifs_link()") Link: https://bugzilla.kernel.org/show_bug.cgi?id=208405 Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2024-07-12ubifs: Move ui->data initialization after initializing securityZhihao Cheng
Host inode and its' xattr will be written on disk after initializing security when creating symlink or dev, then the host inode and its dentry will be written again in ubifs_jnl_update. There is no need to write inode data in the security initialization pass, just move the ui->data initialization after initializing security. Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2024-07-12ubifs: Fix adding orphan entry twice for the same inodeZhihao Cheng
The tmpfile could be added into orphan list twice, first time is creation, the second time is removing after it is linked. The orphan entry could be added twice for tmpfile if following sequence is satisfied: ubifs_tmpfile ubifs_jnl_update ubifs_add_orphan // first time to add orphan entry P1 P2 ubifs_link do_commit ubifs_orphan_start_commit orphan->cmt = 1 ubifs_delete_orphan orphan_delete if (orph->cmt) orph->del = 1; // orphan entry is not deleted from tree return ubifs_unlink ubifs_jnl_update ubifs_add_orphan orphan_add // found old orphan entry, second time to add orphan entry ubifs_err(c, "orphaned twice") return -EINVAL // unlink failed! ubifs_orphan_end_commit erase_deleted // delete old orphan entry rb_erase(&orphan->rb, &c->orph_tree) Fix it by removing orphan entry from orphan tree in advance, rather than remove it from orphan tree in committing process. Fixes: 32fe905c17f0 ("ubifs: Fix O_TMPFILE corner case in ubifs_link()") Link: https://bugzilla.kernel.org/show_bug.cgi?id=218672 Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2024-07-12ubifs: Remove insert_dead_orphan from replaying orphan processZhihao Cheng
UBIFS will do commit at the end of mounting process(rw mode), dead orphans(added by insert_dead_orphan in replaying orphan) are deleted by ubifs_orphan_end_commit(). The only reason why dead orphans are added into orphan list is that old orpans may be lost when powercut happens in ubifs_orphan_end_commit(): ubifs_orphan_end_commit // TNC(updated by orphans) is not written yet if (c->cmt_orphans != 0) commit_orphans consolidate // traverse orphan list write_orph_nodes // rewrite all orphans by ubifs_leb_change // If dead orphans are not in list, they will be lost when powercut // happens, then TNC won't be updated by old orphans in next mounting. Luckily, the condition 'c->cmt_orphans != 0' will never be true in mounting process, there can't be new orphans added into orphan list before mounting returned, but commit will be done at the end of mounting. Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2024-07-12Revert "ubifs: ubifs_symlink: Fix memleak of inode->i_link in error path"Zhihao Cheng
This reverts commit 6379b44cdcd67f5f5d986b73953e99700591edfa. Commit 1e022216dcd2 ("ubifs: ubifs_symlink: Fix memleak of inode->i_link in error path") is applied again in commit 6379b44cdcd6 ("ubifs: ubifs_symlink: Fix memleak of inode->i_link in error path"), which changed ubifs_mknod (It won't become a real problem). Just revert it. Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2024-07-12ubifs: Don't add xattr inode into orphan areaZhihao Cheng
Now, the entire inode with its' xattrs are removed while replaying orphan nodes. There is no need to add xattr inodes into orphan area, which is based on the fact that xattr entries won't be cleared from disk before deleting xattr inodes, in another words, current logic can make sure that xattr inode be deleted in any cases even UBIFS not record xattr inode into orphan area. Let's looking for possible paths that could clear xattr entries from disk but leave the xattr inode on TNC: 1. unlink/tmpfile -> ubifs_jnl_update: inode(nlink=0) is written into bud LEB and added into orphan list, then: a. powercut: ubifs_tnc_remove_ino(xattr entry/inode can be found from TNC and being deleted) is invoked in replaying journal. b. commit + powercut: inode is written into orphan area, and ubifs_tnc_remove_ino is invoked in replaying orphan nodes. c. evicting + powercut: xattr inode(nlink=0) is written on disk, xattr is removed from TNC, gc could clear xattr entries from disk. ubifs_tnc_remove_ino will apply on inode and xattr inode in replaying journal, so lost xattr entries will make no influence. d. evicting + commit + powercut: xattr inode/entry are removed from index tree(on disk) by ubifs_jnl_write_inode, xattr inode is cleared from orphan area by ubifs_jnl_write_inode + commit. e. commit + evicting + powercut: inode is written into orphan area, then equivalent to c. 2. remove xattr -> ubifs_jnl_delete_xattr: xattr entry(inum=0) and xattr inode(nlink=0) is written into bud LEB, xattr entry/inode are removed from TNC, then: a. powercut: gc could clear xattr entries from disk, which won't affect deleting xattr entry from TNC. ubifs_tnc_remove_ino will apply on xattr inode in replaying journal, ubifs_tnc_remove_nm will apply on xattr entry in replaying journal. b. commit + powercut: xattr entry/inode are removed from index tree (on disk). Tracking xattr inode in orphan list is imported by commit 988bec41318f3f ("ubifs: orphan: Handle xattrs like files"), it aims to fix the similar problem described in commit 7959cf3a7506d4a ("ubifs: journal: Handle xattrs like files"). Actually, the problem only exist in journal case but not the orphan case. So, we can remove the orphan tracking for xattr inodes. Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2024-07-12ubifs: Fix unattached xattr inode if powercut happens after deletingZhihao Cheng
When powercut happens after deleting file, the xattr inode could be alone existing in TNC but its' xattr entry cannot be found in TNC. File inode and xattr inode are added into orphan list after deleting file, file inode's nlink is 0 but xattr inode's nlink is not 0 (PS: zero nlink xattr inode is written on disk in evicting process by ubifs_jnl_write_inode). So, following process could happen: 1. touch file 2. setxattr(file) 3. unlink file // inode(nlink=0), xattr inode(nlink=1) are added into orphan list 4. commit // write inode inum and xattr inum into orphan area 5. powercut 6. mount do_kill_orphans // inode(nlink=0) is deleted from TNC by ubifs_tnc_remove_range, // xattr entry is deleted too. // xattr inode(nlink=1) is not deleted from TNC Finally we could see following error while debugging UBIFS: UBIFS error (ubi0:0 pid 1093): dbg_check_filesystem [ubifs]: inode 66 nlink is 1, but calculated nlink is 0 UBIFS (ubi0:0): dump of the inode 66 sitting in LEB 12:2128 node_type 0 (inode node) group_type 1 (in node group) len 197 key (66, inode) size 37 nlink 1 flags 0x20 xattr_cnt 0 xattr_size 0 xattr_names 0 data len 37 Fix it by removing entire inode with it's xattrs while replaying orphan, just replace function ubifs_tnc_remove_range by ubifs_tnc_remove_ino. Fixes: ee1438ce5dc4 ("ubifs: Check link count of inodes when killing orphans.") Link: https://bugzilla.kernel.org/show_bug.cgi?id=218661 Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2024-07-12Merge tag 'for-6.10-rc7-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: "Fix a regression in extent map shrinker behaviour. In the past weeks we got reports from users that there are huge latency spikes or freezes. This was bisected to newly added shrinker of extent maps (it was added to fix a build up of the structures in memory). I'm assuming that the freezes would happen to many users after release so I'd like to get it merged now so it's in 6.10. Although the diff size is not small the changes are relatively straightforward, the reporters verified the fixes and we did testing on our side. The fixes: - adjust behaviour under memory pressure and check lock or scheduling conditions, bail out if needed - synchronize tracking of the scanning progress so inode ranges are not skipped or work duplicated - do a delayed iput when scanning a root so evicting an inode does not slow things down in case of lots of dirty data, also fix lockdep warning, a deadlock could happen when writing the dirty data would need to start a transaction" * tag 'for-6.10-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: avoid races when tracking progress for extent map shrinking btrfs: stop extent map shrinker if reschedule is needed btrfs: use delayed iput during extent map shrinking
2024-07-12dt-bindings: incomplete-devices: document devices without bindingsKrzysztof Kozlowski
There are devices in the wild with non-updatable firmware coming with ACPI tables with rejected compatibles, e.g. "ltr,ltrf216a". Linux kernel still supports this device via ACPI PRP0001, however the compatible was never accepted to bindings. There are also several early PowerPC or SPARC platforms using compatibles for their OpenFirmware, but without in-tree DTS. Often the legacy compatible is not correct in terms of current Devicetree specification, e.g. missing vendor prefix. Finally there are also Linux-specific tools and test code with compatibles. Add a schema covering above cases purely to satisfy the DT schema and scripts/checkpatch.pl checks for undocumented compatibles. For ltr,ltrf216a this also documents the consensus: compatible is allowed only via ACPI PRP0001, but not bindings. Link: https://lore.kernel.org/all/20240705095047.90558-1-marex@denx.de/ Link: https://lore.kernel.org/lkml/20220731173446.7400bfa8@jic23-huawei/T/#me55be502302d70424a85368c2645c89f860b7b40 Cc: Marek Vasut <marex@denx.de> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240712121146.90942-1-krzysztof.kozlowski@linaro.org Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
2024-07-12mtd: ubi: avoid expensive do_div() on 32-bit machinesArnd Bergmann
The use of do_div() in ubi_nvmem_reg_read() makes calling it on 32-bit machines rather expensive. Since the 'from' variable is known to be a 32-bit quantity, it is clearly never needed and can be optimized into a regular division operation. Fixes: b8a77b9a5f9c ("mtd: ubi: fix NVMEM over UBI volumes on 32-bit systems") Fixes: 3ce485803da1 ("mtd: ubi: provide NVMEM layer over UBI volumes") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2024-07-12mtd: ubi: make ubi_class constantRicardo B. Marliere
Since commit 43a7206b0963 ("driver core: class: make class_register() take a const *"), the driver core allows for struct class to be in read-only memory, so move the ubi_class structure to be declared at build time placing it into read-only memory, instead of having to be dynamically allocated at boot time. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net> Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2024-07-12ubi: eba: properly rollback inside self_check_ebaFedor Pchelkin
In case of a memory allocation failure in the volumes loop we can only process the already allocated scan_eba and fm_eba array elements on the error path - others are still uninitialized. Found by Linux Verification Center (linuxtesting.org). Fixes: 00abf3041590 ("UBI: Add self_check_eba()") Cc: stable@vger.kernel.org Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru> Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2024-07-12Merge tag 'ceph-for-6.10-rc8' of https://github.com/ceph/ceph-clientLinus Torvalds
Pull ceph fixes from Ilya Dryomov: "A fix for a possible use-after-free following "rbd unmap" or "umount" marked for stable and two kernel-doc fixups" * tag 'ceph-for-6.10-rc8' of https://github.com/ceph/ceph-client: libceph: fix crush_choose_firstn() kernel-doc warnings libceph: suppress crush_choose_indep() kernel-doc warnings libceph: fix race between delayed_work() and ceph_monc_stop()
2024-07-12Merge tag 'pmdomain-v6.10-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm Pull pmdomain fix from Ulf Hansson: - qcom: Skip retention level for rpmhpd's * tag 'pmdomain-v6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: pmdomain: qcom: rpmhpd: Skip retention level for Power Domains
2024-07-12Merge tag 'mmc-v6.10-rc4-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC host fixes from Ulf Hansson: - davinci_mmc: Prevent transmitted data size from exceeding sgm's length - sdhci: Fix max_seg_size for 64KiB PAGE_SIZE * tag 'mmc-v6.10-rc4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: davinci_mmc: Prevent transmitted data size from exceeding sgm's length mmc: sdhci: Fix max_seg_size for 64KiB PAGE_SIZE
2024-07-12nfsd: nfsd_file_lease_notifier_call gets a file_lease as an argumentJeff Layton
"data" actually refers to a file_lease and not a file_lock. Both structs have their file_lock_core as the first field though, so this bug should be harmless without struct randomization in play. Reported-by: Florian Evers <florian-evers@gmx.de> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219008 Fixes: 05580bbfc6bc ("nfsd: adapt to breakup of struct file_lock") Signed-off-by: Jeff Layton <jlayton@kernel.org> Tested-by: Florian Evers <florian-evers@gmx.de> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2024-07-12perf trace: Fix iteration of syscall ids in syscalltbl->entriesHoward Chu
This is a bug found when implementing pretty-printing for the landlock_add_rule system call, I decided to send this patch separately because this is a serious bug that should be fixed fast. I wrote a test program to do landlock_add_rule syscall in a loop, yet perf trace -e landlock_add_rule freezes, giving no output. This bug is introduced by the false understanding of the variable "key" below: ``` for (key = 0; key < trace->sctbl->syscalls.nr_entries; ++key) { struct syscall *sc = trace__syscall_info(trace, NULL, key); ... } ``` The code above seems right at the beginning, but when looking at syscalltbl.c, I found these lines: ``` for (i = 0; i <= syscalltbl_native_max_id; ++i) if (syscalltbl_native[i]) ++nr_entries; entries = tbl->syscalls.entries = malloc(sizeof(struct syscall) * nr_entries); ... for (i = 0, j = 0; i <= syscalltbl_native_max_id; ++i) { if (syscalltbl_native[i]) { entries[j].name = syscalltbl_native[i]; entries[j].id = i; ++j; } } ``` meaning the key is merely an index to traverse the syscall table, instead of the actual syscall id for this particular syscall. So if one uses key to do trace__syscall_info(trace, NULL, key), because key only goes up to trace->sctbl->syscalls.nr_entries, for example, on my X86_64 machine, this number is 373, it will end up neglecting all the rest of the syscall, in my case, everything after `rseq`, because the traversal will stop at 373, and `rseq` is the last syscall whose id is lower than 373 in tools/perf/arch/x86/include/generated/asm/syscalls_64.c: ``` ... [334] = "rseq", [424] = "pidfd_send_signal", ... ``` The reason why the key is scrambled but perf trace works well is that key is used in trace__syscall_info(trace, NULL, key) to do trace->syscalls.table[id], this makes sure that the struct syscall returned actually has an id the same value as key, making the later bpf_prog matching all correct. After fixing this bug, I can do perf trace on 38 more syscalls, and because more syscalls are visible, we get 8 more syscalls that can be augmented. before: perf $ perf trace -vv --max-events=1 |& grep Reusing Reusing "open" BPF sys_enter augmenter for "stat" Reusing "open" BPF sys_enter augmenter for "lstat" Reusing "open" BPF sys_enter augmenter for "access" Reusing "connect" BPF sys_enter augmenter for "accept" Reusing "sendto" BPF sys_enter augmenter for "recvfrom" Reusing "connect" BPF sys_enter augmenter for "bind" Reusing "connect" BPF sys_enter augmenter for "getsockname" Reusing "connect" BPF sys_enter augmenter for "getpeername" Reusing "open" BPF sys_enter augmenter for "execve" Reusing "open" BPF sys_enter augmenter for "truncate" Reusing "open" BPF sys_enter augmenter for "chdir" Reusing "open" BPF sys_enter augmenter for "mkdir" Reusing "open" BPF sys_enter augmenter for "rmdir" Reusing "open" BPF sys_enter augmenter for "creat" Reusing "open" BPF sys_enter augmenter for "link" Reusing "open" BPF sys_enter augmenter for "unlink" Reusing "open" BPF sys_enter augmenter for "symlink" Reusing "open" BPF sys_enter augmenter for "readlink" Reusing "open" BPF sys_enter augmenter for "chmod" Reusing "open" BPF sys_enter augmenter for "chown" Reusing "open" BPF sys_enter augmenter for "lchown" Reusing "open" BPF sys_enter augmenter for "mknod" Reusing "open" BPF sys_enter augmenter for "statfs" Reusing "open" BPF sys_enter augmenter for "pivot_root" Reusing "open" BPF sys_enter augmenter for "chroot" Reusing "open" BPF sys_enter augmenter for "acct" Reusing "open" BPF sys_enter augmenter for "swapon" Reusing "open" BPF sys_enter augmenter for "swapoff" Reusing "open" BPF sys_enter augmenter for "delete_module" Reusing "open" BPF sys_enter augmenter for "setxattr" Reusing "open" BPF sys_enter augmenter for "lsetxattr" Reusing "openat" BPF sys_enter augmenter for "fsetxattr" Reusing "open" BPF sys_enter augmenter for "getxattr" Reusing "open" BPF sys_enter augmenter for "lgetxattr" Reusing "openat" BPF sys_enter augmenter for "fgetxattr" Reusing "open" BPF sys_enter augmenter for "listxattr" Reusing "open" BPF sys_enter augmenter for "llistxattr" Reusing "open" BPF sys_enter augmenter for "removexattr" Reusing "open" BPF sys_enter augmenter for "lremovexattr" Reusing "fsetxattr" BPF sys_enter augmenter for "fremovexattr" Reusing "open" BPF sys_enter augmenter for "mq_open" Reusing "open" BPF sys_enter augmenter for "mq_unlink" Reusing "fsetxattr" BPF sys_enter augmenter for "add_key" Reusing "fremovexattr" BPF sys_enter augmenter for "request_key" Reusing "fremovexattr" BPF sys_enter augmenter for "inotify_add_watch" Reusing "fremovexattr" BPF sys_enter augmenter for "mkdirat" Reusing "fremovexattr" BPF sys_enter augmenter for "mknodat" Reusing "fremovexattr" BPF sys_enter augmenter for "fchownat" Reusing "fremovexattr" BPF sys_enter augmenter for "futimesat" Reusing "fremovexattr" BPF sys_enter augmenter for "newfstatat" Reusing "fremovexattr" BPF sys_enter augmenter for "unlinkat" Reusing "fremovexattr" BPF sys_enter augmenter for "linkat" Reusing "open" BPF sys_enter augmenter for "symlinkat" Reusing "fremovexattr" BPF sys_enter augmenter for "readlinkat" Reusing "fremovexattr" BPF sys_enter augmenter for "fchmodat" Reusing "fremovexattr" BPF sys_enter augmenter for "faccessat" Reusing "fremovexattr" BPF sys_enter augmenter for "utimensat" Reusing "connect" BPF sys_enter augmenter for "accept4" Reusing "fremovexattr" BPF sys_enter augmenter for "name_to_handle_at" Reusing "fremovexattr" BPF sys_enter augmenter for "renameat2" Reusing "open" BPF sys_enter augmenter for "memfd_create" Reusing "fremovexattr" BPF sys_enter augmenter for "execveat" Reusing "fremovexattr" BPF sys_enter augmenter for "statx" after perf $ perf trace -vv --max-events=1 |& grep Reusing Reusing "open" BPF sys_enter augmenter for "stat" Reusing "open" BPF sys_enter augmenter for "lstat" Reusing "open" BPF sys_enter augmenter for "access" Reusing "connect" BPF sys_enter augmenter for "accept" Reusing "sendto" BPF sys_enter augmenter for "recvfrom" Reusing "connect" BPF sys_enter augmenter for "bind" Reusing "connect" BPF sys_enter augmenter for "getsockname" Reusing "connect" BPF sys_enter augmenter for "getpeername" Reusing "open" BPF sys_enter augmenter for "execve" Reusing "open" BPF sys_enter augmenter for "truncate" Reusing "open" BPF sys_enter augmenter for "chdir" Reusing "open" BPF sys_enter augmenter for "mkdir" Reusing "open" BPF sys_enter augmenter for "rmdir" Reusing "open" BPF sys_enter augmenter for "creat" Reusing "open" BPF sys_enter augmenter for "link" Reusing "open" BPF sys_enter augmenter for "unlink" Reusing "open" BPF sys_enter augmenter for "symlink" Reusing "open" BPF sys_enter augmenter for "readlink" Reusing "open" BPF sys_enter augmenter for "chmod" Reusing "open" BPF sys_enter augmenter for "chown" Reusing "open" BPF sys_enter augmenter for "lchown" Reusing "open" BPF sys_enter augmenter for "mknod" Reusing "open" BPF sys_enter augmenter for "statfs" Reusing "open" BPF sys_enter augmenter for "pivot_root" Reusing "open" BPF sys_enter augmenter for "chroot" Reusing "open" BPF sys_enter augmenter for "acct" Reusing "open" BPF sys_enter augmenter for "swapon" Reusing "open" BPF sys_enter augmenter for "swapoff" Reusing "open" BPF sys_enter augmenter for "delete_module" Reusing "open" BPF sys_enter augmenter for "setxattr" Reusing "open" BPF sys_enter augmenter for "lsetxattr" Reusing "openat" BPF sys_enter augmenter for "fsetxattr" Reusing "open" BPF sys_enter augmenter for "getxattr" Reusing "open" BPF sys_enter augmenter for "lgetxattr" Reusing "openat" BPF sys_enter augmenter for "fgetxattr" Reusing "open" BPF sys_enter augmenter for "listxattr" Reusing "open" BPF sys_enter augmenter for "llistxattr" Reusing "open" BPF sys_enter augmenter for "removexattr" Reusing "open" BPF sys_enter augmenter for "lremovexattr" Reusing "fsetxattr" BPF sys_enter augmenter for "fremovexattr" Reusing "open" BPF sys_enter augmenter for "mq_open" Reusing "open" BPF sys_enter augmenter for "mq_unlink" Reusing "fsetxattr" BPF sys_enter augmenter for "add_key" Reusing "fremovexattr" BPF sys_enter augmenter for "request_key" Reusing "fremovexattr" BPF sys_enter augmenter for "inotify_add_watch" Reusing "fremovexattr" BPF sys_enter augmenter for "mkdirat" Reusing "fremovexattr" BPF sys_enter augmenter for "mknodat" Reusing "fremovexattr" BPF sys_enter augmenter for "fchownat" Reusing "fremovexattr" BPF sys_enter augmenter for "futimesat" Reusing "fremovexattr" BPF sys_enter augmenter for "newfstatat" Reusing "fremovexattr" BPF sys_enter augmenter for "unlinkat" Reusing "fremovexattr" BPF sys_enter augmenter for "linkat" Reusing "open" BPF sys_enter augmenter for "symlinkat" Reusing "fremovexattr" BPF sys_enter augmenter for "readlinkat" Reusing "fremovexattr" BPF sys_enter augmenter for "fchmodat" Reusing "fremovexattr" BPF sys_enter augmenter for "faccessat" Reusing "fremovexattr" BPF sys_enter augmenter for "utimensat" Reusing "connect" BPF sys_enter augmenter for "accept4" Reusing "fremovexattr" BPF sys_enter augmenter for "name_to_handle_at" Reusing "fremovexattr" BPF sys_enter augmenter for "renameat2" Reusing "open" BPF sys_enter augmenter for "memfd_create" Reusing "fremovexattr" BPF sys_enter augmenter for "execveat" Reusing "fremovexattr" BPF sys_enter augmenter for "statx" TL;DR: These are the new syscalls that can be augmented Reusing "openat" BPF sys_enter augmenter for "open_tree" Reusing "openat" BPF sys_enter augmenter for "openat2" Reusing "openat" BPF sys_enter augmenter for "mount_setattr" Reusing "openat" BPF sys_enter augmenter for "move_mount" Reusing "open" BPF sys_enter augmenter for "fsopen" Reusing "openat" BPF sys_enter augmenter for "fspick" Reusing "openat" BPF sys_enter augmenter for "faccessat2" Reusing "openat" BPF sys_enter augmenter for "fchmodat2" as for the perf trace output: before perf $ perf trace -e faccessat2 --max-events=1 [no output] after perf $ ./perf trace -e faccessat2 --max-events=1 0.000 ( 0.037 ms): waybar/958 faccessat2(dfd: 40, filename: "uevent") = 0 P.S. The reason why this bug was not found in the past five years is probably because it only happens to the newer syscalls whose id is greater, for instance, faccessat2 of id 439, which not a lot of people care about when using perf trace. [Arnaldo]: notes That and the fact that the BPF code was hidden before having to use -e, that got changed kinda recently when we switched to using BPF skels for augmenting syscalls in 'perf trace': ⬢[acme@toolbox perf-tools-next]$ git log --oneline tools/perf/util/bpf_skel/augmented_raw_syscalls.bpf.c a9f4c6c999008c92 perf trace: Collect sys_nanosleep first argument 29d16de26df17e94 perf augmented_raw_syscalls.bpf: Move 'struct timespec64' to vmlinux.h 5069211e2f0b47e7 perf trace: Use the right bpf_probe_read(_str) variant for reading user data 33b725ce7b988756 perf trace: Avoid compile error wrt redefining bool 7d9642311b6d9d31 perf bpf augmented_raw_syscalls: Add an assert to make sure sizeof(augmented_arg->value) is a power of two. 262b54b6c9396823 perf bpf augmented_raw_syscalls: Add an assert to make sure sizeof(saddr) is a power of two. 1836480429d173c0 perf bpf_skel augmented_raw_syscalls: Cap the socklen parameter using &= sizeof(saddr) cd2cece61ac5f900 perf trace: Tidy comments related to BPF + syscall augmentation 5e6da6be3082f77b perf trace: Migrate BPF augmentation to use a skeleton ⬢[acme@toolbox perf-tools-next]$ ⬢[acme@toolbox perf-tools-next]$ git show --oneline --pretty=reference 5e6da6be3082f77b | head -1 5e6da6be3082f77b (perf trace: Migrate BPF augmentation to use a skeleton, 2023-08-10) ⬢[acme@toolbox perf-tools-next]$ I.e. from August, 2023. One had as well to ask for BUILD_BPF_SKEL=1, which now is default if all it needs is available on the system. I simplified the code to not expose the 'struct syscall' outside of tools/perf/util/syscalltbl.c, instead providing a function to go from the index to the syscall id: int syscalltbl__id_at_idx(struct syscalltbl *tbl, int idx); Signed-off-by: Howard Chu <howardchu95@gmail.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Link: https://lore.kernel.org/lkml/ZmhlAxbVcAKoPTg8@x1 Link: https://lore.kernel.org/r/20240705132059.853205-2-howardchu95@gmail.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2024-07-12cgroup: Add Michal Koutný as a maintainerTejun Heo
Michal has been contributing and reviewing patches across cgroup for a while now. Add him as a maintainer. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Michal Koutný <mkoutny@suse.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Zefan Li <lizefan.x@bytedance.com> Cc: Linus Torvalds <torvalds@linux-foundation.org>
2024-07-12cgroup/misc: Introduce misc.events.localXiu Jianfeng
Currently the event counting provided by misc.events is hierarchical, it's not practical if user is only concerned with events of a specified cgroup. Therefore, introduce misc.events.local collect events specific to the given cgroup. This is analogous to memory.events.local and pids.events.local. Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2024-07-12dm: introduce the target flag mempool_needs_integrityMikulas Patocka
This commit introduces the dm target flag mempool_needs_integrity. When the flag is set, device mapper will call bioset_integrity_create on it's bio sets. The target can then call bio_integrity_alloc on the bios allocated from the table's mempool. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2024-07-12perf dso: Fix address sanitizer buildIan Rogers
Various files had been missed from having accessor functions added for the sake of dso reference count checking. Add the function calls and missing dso accessor functions. Fixes: ee756ef7491e ("perf dso: Add reference count checking and accessor functions") Signed-off-by: Ian Rogers <irogers@google.com> Cc: James Clark <james.clark@linaro.org> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Yunseong Kim <yskelg@gmail.com> Cc: Will Deacon <will@kernel.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Leo Yan <leo.yan@linux.dev> Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Cc: John Garry <john.g.garry@oracle.com> Link: https://lore.kernel.org/r/20240704011745.1021288-1-irogers@google.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2024-07-12perf mem: Warn if memory events are not supported on all CPUsLeo Yan
It is possible that memory events are not supported on all CPUs. Prints a warning by dumping the enabled CPU maps in this case. Signed-off-by: Leo Yan <leo.yan@arm.com> Reviewed-by: James Clark <james.clark@linaro.org> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: John Garry <john.g.garry@oracle.com> Cc: linux-arm-kernel@lists.infradead.org Cc: coresight@lists.linaro.org Link: https://lore.kernel.org/r/20240706152035.86983-3-leo.yan@arm.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2024-07-12perf arm-spe: Support multiple Arm SPE PMUsLeo Yan
A platform can have more than one Arm SPE PMU. For example, a system with multiple clusters may have each cluster enabled with its own Arm SPE instance. In such case, the PMU devices will be named 'arm_spe_0', 'arm_spe_1', and so on. Currently, the tool only supports 'arm_spe_0'. This commit extends support to multiple Arm SPE PMUs by detecting the substring 'arm_spe_'. Signed-off-by: Leo Yan <leo.yan@arm.com> Reviewed-by: James Clark <james.clark@linaro.org> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: John Garry <john.g.garry@oracle.com> Cc: linux-arm-kernel@lists.infradead.org Cc: coresight@lists.linaro.org Link: https://lore.kernel.org/r/20240706152035.86983-2-leo.yan@arm.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2024-07-12perf build x86: Fix SC2034 error in syscalltbl.shHaoze Xie
Change the unused var in 'arch/x86/entry/syscalls/syscalltbl.sh' to '_' when reading from '$sorted_table'. This change allows the script to pass tests of ShellCheck before and after version 0.7.2 at the same time. When building in arch x86, syscalltbl.sh got a ShellCheck warning, which makes compilation error: In arch/x86/entry/syscalls/syscalltbl.sh line 27: while read nr _abi name entry _compat; do ^-^ SC2034: abi appears unused. Verify use (or export if used externally). ^----^ SC2034: compat appears unused. Verify use (or export if used externally). The script reads unused param abi and compat. It uses format '_xxx' to indicate dummy vars, which won't work properly when ShellCheck <= 0.7.2. According to SC2034, the more general way of writing is to use directly '_' to indicate discarding vars. 'entry' is also replaced by '_' because it just happens to be defined in emit function, otherwise it will lead to some misunderstandings. Link: https://www.shellcheck.net/wiki/SC2034 Signed-off-by: Haoze Xie <royenheart@gmail.com> Signed-off-by: Yuan Tan <tanyuan@tinylab.org> Link: https://lore.kernel.org/r/2143cab4cd8468c88860f4e5e382d0e6b4d89ac9.1720372178.git.royenheart@gmail.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2024-07-12perf record: Fix memset out-of-range errorHaoze Xie
Modified the object of 'memset' from '&lost.lost' to '&lost' in record__read_lost_samples. This allows 'memset' to access memory properly without causing out-of-bounds problems. The problems got from builtin-record.c are: In file included from /usr/include/string.h:495, from util/parse-events.h:13, from builtin-record.c:14: In function 'memset', inlined from 'record__read_lost_samples' at builtin-record.c:1958:6, inlined from '__cmd_record.constprop' at builtin-record.c:2817:2: /usr/include/x86_64-linux-gnu/bits/string_fortified.h:71:10: error: '__builtin_memset' offset [17, 64] from the object at 'lost' is out of the bounds of referenced subobject 'lost' with type 'struct perf_record_lost_samples' at offset 0 [-Werror=array-bounds] 71|return __builtin___memset_chk (__dest,__ch,__len,__bos0 (__dest)); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The error arised when performing a memset operation on the 'lost' variable, the bytes of 'sizeof(lost)' exceeds that of '&lost.lost', which are 64 and 16. Fixes: 6c1785cd75ef ("perf record: Ensure space for lost samples") Signed-off-by: Haoze Xie <royenheart@gmail.com> Signed-off-by: Yuan Tan <tanyuan@tinylab.org> Link: https://lore.kernel.org/r/11e12f171b846577cac698cd3999db3d7f6c4d03.1720372317.git.royenheart@gmail.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2024-07-12perf sched map: Add --fuzzy-name option for fuzzy matching in task namesMadadi Vineeth Reddy
The --fuzzy-name option can be used if fuzzy name matching is required. For example, "taskname" can be matched to any string that contains "taskname" as its substring. Sample output for --task-name wdav --fuzzy-name ============= . *A0 . . . . - . 131040.641346 secs A0 => wdavdaemon:62509 . A0 *B0 . . . - . 131040.641378 secs B0 => wdavdaemon:62274 . *- B0 . . . - . 131040.641379 secs *C0 . B0 . . . . . 131040.641572 secs C0 => wdavdaemon:62283 C0 . B0 . *D0 . . . 131040.641572 secs D0 => wdavdaemon:62277 C0 . B0 . D0 . *E0 . 131040.641578 secs E0 => wdavdaemon:62270 *- . B0 . D0 . E0 . 131040.641581 secs Suggested-by: Chen Yu <yu.c.chen@intel.com> Reviewed-and-tested-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Signed-off-by: Madadi Vineeth Reddy <vineethr@linux.ibm.com> Link: https://lore.kernel.org/r/20240707182716.22054-4-vineethr@linux.ibm.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2024-07-12perf sched map: Add support for multiple task names using CSVMadadi Vineeth Reddy
To track the scheduling patterns of multiple tasks simultaneously, multiple task names can be specified using a comma separator without any whitespace. Sample output for --task-name perf,wdavdaemon ============= . *A0 . . . . - . 131040.641346 secs A0 => wdavdaemon:62509 . A0 *B0 . . . - . 131040.641378 secs B0 => wdavdaemon:62274 . *- B0 . . . - . 131040.641379 secs *C0 . B0 . . . . . 131040.641572 secs C0 => wdavdaemon:62283 ... . *- . . . . . . 131041.395649 secs . . . . . . . *X2 131041.403969 secs X2 => perf:70211 . . . . . . . *- 131041.404006 secs Suggested-by: Namhyung Kim <namhyung@kernel.org> Reviewed-and-tested-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Signed-off-by: Madadi Vineeth Reddy <vineethr@linux.ibm.com> Cc: Chen Yu <yu.c.chen@intel.com> Link: https://lore.kernel.org/r/20240707182716.22054-3-vineethr@linux.ibm.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2024-07-12perf sched map: Add task-name option to filter the output mapMadadi Vineeth Reddy
By default, perf sched map prints sched-in events for all the tasks which may not be required all the time as it prints lot of symbols and rows to the terminal. With --task-name option, one could specify the specific task name for which the map has to be shown. This would help in analyzing the CPU usage patterns easier for that specific task. Since multiple PID's might have the same task name, using task-name filter would be more useful for debugging. For other tasks, instead of printing the symbol, '-' is printed and the same '.' is used to represent idle. '-' is used instead of symbol for other tasks because it helps in clear visualization of task of interest and secondly the symbol itself doesn't mean anything because the sched-in of that symbol will not be printed(first sched-in contains pid and the corresponding symbol). When using the --task-name option, the sched-out time is represented by a '*-'. Since not all task sched-in events are printed, the sched-out time of the relevant task might be lost. This representation ensures that the sched-out time of the interested task is not overlooked. 6.10.0-rc1 ========== *A0 131040.639793 secs A0 => migration/0:19 *. 131040.639801 secs . => swapper:0 . *B0 131040.639830 secs B0 => migration/1:24 . *. 131040.639836 secs . . *C0 131040.640108 secs C0 => migration/2:30 . . *. 131040.640163 secs . . . *D0 131040.640386 secs D0 => migration/3:36 . . . *. 131040.640395 secs 6.10.0-rc1 + patch (--task-name wdavdaemon) ============= . *A0 . . . . - . 131040.641346 secs A0 => wdavdaemon:62509 . A0 *B0 . . . - . 131040.641378 secs B0 => wdavdaemon:62274 - *- B0 . . . - . 131040.641379 secs *C0 . B0 . . . . . 131040.641572 secs C0 => wdavdaemon:62283 C0 . B0 . *D0 . . . 131040.641572 secs D0 => wdavdaemon:62277 C0 . B0 . D0 . *E0 . 131040.641578 secs E0 => wdavdaemon:62270 *- . B0 . D0 . E0 . 131040.641581 secs . . B0 . D0 . *- . 131040.641583 secs Reviewed-and-tested-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Signed-off-by: Madadi Vineeth Reddy <vineethr@linux.ibm.com> Cc: Chen Yu <yu.c.chen@intel.com> Link: https://lore.kernel.org/r/20240707182716.22054-2-vineethr@linux.ibm.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2024-07-12Fix the unbalanced pm_runtime_enable in wcd937x-sdwMark Brown
Merge series from Mohammad Rafi Shaik <quic_mohs@quicinc.com>: This patch set change will fix the unbalanced pm_runtime_enable in wcd937x-sdw soundwire slave. And removed the string compare with widget name in MIC BIAS settings, instead of string compare use the MIC BIAS id's as value. Removed separate handling for vdd-buck regulator supply which is not required. The vdd-buck regulator supply enabled using bulk enable. Added the error handling in wcd937x_probe() and disable the regulators in error case.
2024-07-12HID: hid-steam: Fix typo in goto labelThorsten Blum
s/stream/steam/ Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com> Link: https://patch.msgid.link/20240705045458.65108-2-thorsten.blum@toblux.com Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
2024-07-12HID: mcp2221: Remove unnecessary semicolonChen Ni
Remove unnecessary semicolon at the end of the switch statement. This is detected by coccinelle. Signed-off-by: Chen Ni <nichen@iscas.ac.cn> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://patch.msgid.link/20240709012223.17393-1-nichen@iscas.ac.cn Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
2024-07-12HID: Fix spelling mistakes "Kensigton" -> "Kensington"Colin Ian King
There are spelling mistakes in a comment and in the module description. Fix these. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Link: https://patch.msgid.link/20240711083513.282724-1-colin.i.king@gmail.com Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
2024-07-12selftests/bpf: DENYLIST.aarch64: Skip fexit_sleep againDaniel Borkmann
Revert commit 90dc946059b7 ("selftests/bpf: DENYLIST.aarch64: Remove fexit_sleep") again. The fix in 19d3c179a377 ("bpf, arm64: Fix trampoline for BPF_TRAMP_F_CALL_ORIG") does not address all of the issues and BPF CI is still hanging and timing out: https://github.com/kernel-patches/bpf/actions/runs/9905842936/job/27366435436 [...] #89/11 fexit_bpf2bpf/func_replace_global_func:OK #89/12 fexit_bpf2bpf/fentry_to_cgroup_bpf:OK #89/13 fexit_bpf2bpf/func_replace_progmap:OK #89 fexit_bpf2bpf:OK Error: The operation was canceled. Thus more investigation work & fixing is needed before the test can be put in place again. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Puranjay Mohan <puranjay@kernel.org> Link: https://lore.kernel.org/bpf/20240705145009.32340-1-puranjay@kernel.org
2024-07-12kunit: Introduce KUNIT_ASSERT_MEMEQ and KUNIT_ASSERT_MEMNEQ macrosEric Chan
Introduces KUNIT_ASSERT_MEMEQ and KUNIT_ASSERT_MEMNEQ macros to provide assert-type equivalents for memory comparison. While KUNIT_EXPECT_MEMEQ and KUNIT_EXPECT_MEMNEQ are available for expectations, the addition of these new macros ensures that assertions can also be used for memory comparisons, enhancing the consistency and completeness of the kunit framework. Signed-off-by: Eric Chan <ericchancf@google.com> Reviewed-by: David Gow <davidgow@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2024-07-12kunit: Rename KUNIT_ASSERT_FAILURE to KUNIT_FAIL_AND_ABORT for readabilityEric Chan
Both KUNIT_FAIL and KUNIT_ASSERT_FAILURE defined to KUNIT_FAIL_ASSERTION with different tpye of kunit_assert_type. The current naming of KUNIT_ASSERT_FAILURE and KUNIT_FAIL_ASSERTION is confusing due to their similarities. To improve readability and symmetry, renames KUNIT_ASSERT_FAILURE to KUNIT_FAIL_AND_ABORT. Makes the naming consistent, with KUNIT_FAIL and KUNIT_FAIL_AND_ABORT being symmetrical. Additionally, an explanation for KUNIT_FAIL_AND_ABORT has been added to clarify its usage. Signed-off-by: Eric Chan <ericchancf@google.com> Reviewed-by: David Gow <davidgow@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2024-07-12kunit: Fix the comment of KUNIT_ASSERT_STRNEQ as assertionEric Chan
The current comment for KUNIT_ASSERT_STRNEQ incorrectly describes it as an expectation. Since KUNIT_ASSERT_STRNEQ is an assertion, updates the comment to correctly refer to it as such. Signed-off-by: Eric Chan <ericchancf@google.com> Reviewed-by: David Gow <davidgow@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2024-07-12kunit: executor: Simplify string allocation handlingKees Cook
The alloc/copy code pattern is better consolidated to single kstrdup (and kstrndup) calls instead. This gets rid of deprecated[1] strncpy() uses as well. Replace one other strncpy() use with the more idiomatic strscpy(). Link: https://github.com/KSPP/linux/issues/90 [1] Reviewed-by: David Gow <davidgow@google.com> Signed-off-by: Kees Cook <kees@kernel.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2024-07-12Merge tag 'arm-fixes-6.10-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "Most of these changes are Qualcomm SoC specific and came in just after I sent out the last set of fixes. This includes two regression fixes for SoC drivers, a defconfig change to ensure the Lenovo X13s is usable and 11 changes to DT files to fix regressions and minor platform specific issues. Tony and Chunyan step back from their respective maintainership roles on the omap and unisoc platforms, and Christophe in turn takes over maintaining some of the Freescale SoC drivers that he has been taking care of in practice already. Lastly, there are two trivial fixes for the davinci and sunxi platforms" * tag 'arm-fixes-6.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: MAINTAINERS: Update FREESCALE SOC DRIVERS and QUICC ENGINE LIBRARY MAINTAINERS: Add more maintainers for omaps ARM: davinci: Convert comma to semicolon MAINTAINERS: Move myself from SPRD Maintainer to Reviewer Revert "dt-bindings: cache: qcom,llcc: correct QDU1000 reg entries" arm64: dts: qcom: qdu1000: Fix LLCC reg property arm64: dts: qcom: sm6115: add iommu for sdhc_1 arm64: dts: qcom: x1e80100-crd: fix DAI used for headset recording arm64: dts: qcom: x1e80100-crd: fix WCD audio codec TX port mapping soc: qcom: pmic_glink: disable UCSI on sc8280xp arm64: defconfig: enable Elan i2c-hid driver arm64: dts: qcom: sc8280xp-crd: use external pull up for touch reset arm64: dts: qcom: sc8280xp-x13s: fix touchscreen power on arm64: dts: qcom: x1e80100: Fix PCIe 6a reg offsets and add MHI arm64: dts: qcom: sa8775p: Correct IRQ number of EL2 non-secure physical timer arm64: dts: allwinner: Fix PMIC interrupt number arm64: dts: qcom: sc8280xp: Set status = "reserved" on PSHOLD arm64: dts: qcom: x1e80100-*: Allocate some CMA buffers arm64: dts: qcom: sc8180x: Fix LLCC reg property again
2024-07-12Merge branch 'iommu/iommufd/paging-domain-alloc' into iommu/nextWill Deacon
* iommu/iommufd/paging-domain-alloc: RDMA/usnic: Use iommu_paging_domain_alloc() wifi: ath11k: Use iommu_paging_domain_alloc() wifi: ath10k: Use iommu_paging_domain_alloc() drm/msm: Use iommu_paging_domain_alloc() vhost-vdpa: Use iommu_paging_domain_alloc() vfio/type1: Use iommu_paging_domain_alloc() iommufd: Use iommu_paging_domain_alloc() iommu: Add iommu_paging_domain_alloc() interface
2024-07-12Merge branch 'iommu/iommufd/attach-handles' into iommu/nextWill Deacon
* iommu/iommufd/attach-handles: iommu: Extend domain attach group with handle support iommu: Add attach handle to struct iopf_group iommu: Remove sva handle list iommu: Introduce domain attachment handle
2024-07-12Merge branch 'iommu/pci/ats' into iommu/nextWill Deacon
* iommu/pci/ats: arm64: dts: fvp: Enable PCIe ATS for Base RevC FVP iommu/of: Support ats-supported device-tree property dt-bindings: PCI: generic: Add ats-supported property
2024-07-12Merge branch 'iommu/fwspec-ops-removal' into iommu/nextWill Deacon
* iommu/fwspec-ops-removal: iommu: Remove iommu_fwspec ops OF: Simplify of_iommu_configure() ACPI: Retire acpi_iommu_fwspec_ops() iommu: Resolve fwspec ops automatically iommu/mediatek-v1: Clean up redundant fwspec checks [will: Fixed conflict in drivers/iommu/tegra-smmu.c between fwspec ops removal and fwspec driver fix as per Robin and Jon]
2024-07-12riscv: set trap vector earlieryang.zhang
The exception vector of the booting hart is not set before enabling the mmu and then still points to the value of the previous firmware, typically _start. That makes it hard to debug setup_vm() when bad things happen. So fix that by setting the exception vector earlier. Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com> Signed-off-by: yang.zhang <yang.zhang@hexintek.com> Link: https://lore.kernel.org/r/20240508022445.6131-1-gaoshanliukou@163.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-07-12Merge patch series "riscv: Apply Zawrs when available"Palmer Dabbelt
Andrew Jones <ajones@ventanamicro.com> says: Zawrs provides two instructions (wrs.nto and wrs.sto), where both are meant to allow the hart to enter a low-power state while waiting on a store to a memory location. The instructions also both wait an implementation-defined "short" duration (unless the implementation terminates the stall for another reason). The difference is that while wrs.sto will terminate when the duration elapses, wrs.nto, depending on configuration, will either just keep waiting or an ILL exception will be raised. Linux will use wrs.nto, so if platforms have an implementation which falls in the "just keep waiting" category (which is not expected), then it should _not_ advertise Zawrs in the hardware description. Like wfi (and with the same {m,h}status bits to configure it), when wrs.nto is configured to raise exceptions it's expected that the higher privilege level will see the instruction was a wait instruction, do something, and then resume execution following the instruction. For example, KVM does configure exceptions for wfi (hstatus.VTW=1) and therefore also for wrs.nto. KVM does this for wfi since it's better to allow other tasks to be scheduled while a VCPU waits for an interrupt. For waits such as those where wrs.nto/sto would be used, which are typically locks, it is also a good idea for KVM to be involved, as it can attempt to schedule the lock holding VCPU. This series starts with Christoph's addition of the riscv smp_cond_load_relaxed function which applies wrs.sto when available. That patch has been reworked to use wrs.nto and to use the same approach as Arm for the wait loop, since we can't have arbitrary C code between the load-reserved and the wrs. Then, hwprobe support is added (since the instructions are also usable from usermode), and finally KVM is taught about wrs.nto, allowing guests to see and use the Zawrs extension. We still don't have test results from hardware, and it's not possible to prove that using Zawrs is a win when testing on QEMU, not even when oversubscribing VCPUs to guests. However, it is possible to use KVM selftests to force a scenario where we can prove Zawrs does its job and does it well. [4] is a test which does this and, on my machine, without Zawrs it takes 16 seconds to complete and with Zawrs it takes 0.25 seconds. This series is also available here [1]. In order to use QEMU for testing a build with [2] is needed. In order to enable guests to use Zawrs with KVM using kvmtool, the branch at [3] may be used. [1] https://github.com/jones-drew/linux/commits/riscv/zawrs-v3/ [2] https://lore.kernel.org/all/20240312152901.512001-2-ajones@ventanamicro.com/ [3] https://github.com/jones-drew/kvmtool/commits/riscv/zawrs/ [4] https://github.com/jones-drew/linux/commit/cb2beccebcece10881db842ed69bdd5715cfab5d Link: https://lore.kernel.org/r/20240426100820.14762-8-ajones@ventanamicro.com * b4-shazam-merge: KVM: riscv: selftests: Add Zawrs extension to get-reg-list test KVM: riscv: Support guest wrs.nto riscv: hwprobe: export Zawrs ISA extension riscv: Add Zawrs support for spinlocks dt-bindings: riscv: Add Zawrs ISA extension description riscv: Provide a definition for 'pause' Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-07-12KVM: riscv: selftests: Add Zawrs extension to get-reg-list testAndrew Jones
KVM RISC-V allows the Zawrs extension for the Guest/VM, so add it to the get-reg-list test. Signed-off-by: Andrew Jones <ajones@ventanamicro.com> Acked-by: Anup Patel <anup@brainfault.org> Link: https://lore.kernel.org/r/20240426100820.14762-14-ajones@ventanamicro.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
generated by cgit (git 2.34.1) at 2025-09-19 01:43:00 +0000