summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-08-31powerpc/powernv: update to new mmu_notifier semanticJérôme Glisse
Calls to mmu_notifier_invalidate_page() were replaced by calls to mmu_notifier_invalidate_range() and now are bracketed by calls to mmu_notifier_invalidate_range_start()/end() Remove now useless invalidate_page callback. Signed-off-by: Jérôme Glisse <jglisse@redhat.com> Cc: linuxppc-dev@lists.ozlabs.org Cc: Alistair Popple <alistair@popple.id.au> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-31mm/rmap: update to new mmu_notifier semantic v2Jérôme Glisse
Replace all mmu_notifier_invalidate_page() calls by *_invalidate_range() and make sure it is bracketed by calls to *_invalidate_range_start()/end(). Note that because we can not presume the pmd value or pte value we have to assume the worst and unconditionaly report an invalidation as happening. Changed since v2: - try_to_unmap_one() only one call to mmu_notifier_invalidate_range() - compute end with PAGE_SIZE << compound_order(page) - fix PageHuge() case in try_to_unmap_one() Signed-off-by: Jérôme Glisse <jglisse@redhat.com> Reviewed-by: Andrea Arcangeli <aarcange@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Bernhard Held <berny156@gmx.de> Cc: Adam Borowski <kilobyte@angband.pl> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Wanpeng Li <kernellwp@gmail.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: axie <axie@amd.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-31dax: update to new mmu_notifier semanticJérôme Glisse
Replace all mmu_notifier_invalidate_page() calls by *_invalidate_range() and make sure it is bracketed by calls to *_invalidate_range_start()/end(). Note that because we can not presume the pmd value or pte value we have to assume the worst and unconditionaly report an invalidation as happening. Signed-off-by: Jérôme Glisse <jglisse@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Bernhard Held <berny156@gmx.de> Cc: Adam Borowski <kilobyte@angband.pl> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Wanpeng Li <kernellwp@gmail.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: axie <axie@amd.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-01ceph: fix readpage from fscacheYan, Zheng
ceph_readpage() unlocks page prematurely prematurely in the case that page is reading from fscache. Caller of readpage expects that page is uptodate when it get unlocked. So page shoule get locked by completion callback of fscache_read_or_alloc_pages() Cc: stable@vger.kernel.org # 4.1+, needs backporting for < 4.7 Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-08-31Merge branch 'mlxsw-Add-IPv6-host-dpipe-table'David S. Miller
Jiri Pirko says: ==================== mlxsw: Add IPv6 host dpipe table This patchset adds IPv6 host dpipe table support. This will provide the ability to observe the hardware offloaded IPv6 neighbors. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-31mlxsw: spectrum_dpipe: Add support for controlling IPv6 neighbor countersArkadi Sharshevsky
Add support for controlling IPv6 neighbor counters via dpipe. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-31mlxsw: spectrum_router: Add support for setting counters on IPv6 neighborsArkadi Sharshevsky
Add support for setting counters on IPv6 neighbors based on dpipe's host6 table counter status. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-31mlxsw: spectrum_dpipe: Add support for IPv6 host table dumpArkadi Sharshevsky
Add support for IPv6 host table dump. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-31mlxsw: spectrum_dpipe: Make host entry fill handler more genericArkadi Sharshevsky
Change the host entry filler helper to be applicable for both IPv4/6 addresses. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-31mlxsw: spectrum_router: Add IPv6 neighbor access helperArkadi Sharshevsky
Add helper for accessing destination IP in case of IPv6 neighbor. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-31mlxsw: spectrum_dpipe: Add IPv6 host table initial supportArkadi Sharshevsky
Add IPv6 host table initial support. The action behavior for both IPv4/6 tables is the same, thus the same action dump op is used. Neighbors with link local address are ignored. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-31mlxsw: spectrum_router: Export IPv6 link local address check helperArkadi Sharshevsky
Neighbors with link local addresses are not offloaded to the host table, yet, the are maintained in the driver for adjacency table usage. When dumping the IPv6 host neighbors this link local neighbors should be ignored. This patch exports this helper for dpipe usage. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-31devlink: Add IPv6 header for dpipeArkadi Sharshevsky
This will be used by the IPv6 host table which will be introduced in the following patches. The fields in the header are added per-use. This header is global and can be reused by many drivers. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-31binfmt_flat: fix arch/m32r and arch/microblaze flat_put_addr_at_rp()Randy Dunlap
Change the m32r flat_put_addr_at_rp() function to return int and always return 0. The microblaze function already returned 0 so just change its function return type from void to int. Seven (7) other arch-es already have this function as returning an int type result. Fixes: 468138d78510 (binfmt_flat: flat_{get,put}_addr_from_rp() should be able to fail) Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-08-31compat_hdio_ioctl: Fix a declarationBart Van Assche
This patch avoids that sparse reports the following warning messages: block/compat_ioctl.c:85:11: warning: incorrect type in assignment (different address spaces) block/compat_ioctl.c:85:11: expected unsigned long *[noderef] <asn:1>p block/compat_ioctl.c:85:11: got void [noderef] <asn:1>* block/compat_ioctl.c:91:21: warning: incorrect type in argument 1 (different address spaces) block/compat_ioctl.c:91:21: expected void const volatile [noderef] <asn:1>*<noident> block/compat_ioctl.c:91:21: got unsigned long *[noderef] <asn:1>p block/compat_ioctl.c:87:53: warning: dereference of noderef expression block/compat_ioctl.c:91:21: warning: dereference of noderef expression Fixes: commit d597580d3737 ("generic ...copy_..._user primitives") Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-08-31<linux/uaccess.h>: Fix copy_in_user() declarationBart Van Assche
copy_in_user() copies data from user-space address @from to user- space address @to. Hence declare both @from and @to as user-space pointers. Fixes: commit d597580d3737 ("generic ...copy_..._user primitives") Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: <stable@vger.kernel.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-08-31annotate RWF_... flagsChristoph Hellwig
[AV: added missing annotations in syscalls.h/compat.h] Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-08-31teach SYSCALL_DEFINE/COMPAT_SYSCALL_DEFINE to handle __bitwise argumentsAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-08-31wl1251: add a missing spin_lock_init()Cong Wang
wl1251: add a missing spin_lock_init() This fixes the following kernel warning: [ 5668.771453] BUG: spinlock bad magic on CPU#0, kworker/u2:3/9745 [ 5668.771850] lock: 0xce63ef20, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0 [ 5668.772277] CPU: 0 PID: 9745 Comm: kworker/u2:3 Tainted: G W 4.12.0-03002-gec979a4-dirty #40 [ 5668.772796] Hardware name: Nokia RX-51 board [ 5668.773071] Workqueue: phy1 wl1251_irq_work [ 5668.773345] [<c010c9e4>] (unwind_backtrace) from [<c010a274>] (show_stack+0x10/0x14) [ 5668.773803] [<c010a274>] (show_stack) from [<c01545a4>] (do_raw_spin_lock+0x6c/0xa0) [ 5668.774230] [<c01545a4>] (do_raw_spin_lock) from [<c06ca578>] (_raw_spin_lock_irqsave+0x10/0x18) [ 5668.774658] [<c06ca578>] (_raw_spin_lock_irqsave) from [<c048c010>] (wl1251_op_tx+0x38/0x5c) [ 5668.775115] [<c048c010>] (wl1251_op_tx) from [<c06a12e8>] (ieee80211_tx_frags+0x188/0x1c0) [ 5668.775543] [<c06a12e8>] (ieee80211_tx_frags) from [<c06a138c>] (__ieee80211_tx+0x6c/0x130) [ 5668.775970] [<c06a138c>] (__ieee80211_tx) from [<c06a3dbc>] (ieee80211_tx+0xdc/0x104) [ 5668.776367] [<c06a3dbc>] (ieee80211_tx) from [<c06a4af0>] (__ieee80211_subif_start_xmit+0x454/0x8c8) [ 5668.776824] [<c06a4af0>] (__ieee80211_subif_start_xmit) from [<c06a4f94>] (ieee80211_subif_start_xmit+0x30/0x2fc) [ 5668.777343] [<c06a4f94>] (ieee80211_subif_start_xmit) from [<c0578848>] (dev_hard_start_xmit+0x80/0x118) ... by adding the missing spin_lock_init(). Reported-by: Pavel Machek <pavel@ucw.cz> Cc: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Pavel Machek <pavel@ucw.cz> Cc: stable@kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-31alarmtimer: Ensure RTC module is not unloadedAlexandre Belloni
When registering the rtc device to be used to handle alarm timers, get_device is used to ensure the device doesn't go away but the module can still be unloaded. Call try_module_get to ensure the rtc driver will not go away. Reported-and-tested-by: Michal Simek <monstr@monstr.eu> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: John Stultz <john.stultz@linaro.org> Cc: Stephen Boyd <sboyd@codeaurora.org> Link: http://lkml.kernel.org/r/20170820220146.30969-1-alexandre.belloni@free-electrons.com
2017-08-31Documentation/sphinx: fix kernel-doc decode for non-utf-8 localeJani Nikula
On python3, Popen() universal_newlines=True converts the subprocess stdout to unicode text using a codec based on user preferences. Given LANG indicating ascii and utf-8 stdout from the subprocess, you'd get: WARNING: kernel-doc '../scripts/kernel-doc -rst -enable-lineno ../drivers/media/dvb-core/demux.h' processing failed with: 'ascii' codec can't decode byte 0xe2 in position 6368: ordinal not in range(128) Fix this by dropping universal_newlines=True and replacing the implicit LANG specific decode with an explicit utf-8 decode. This also gets rid of the annoying conditional code for python 2 vs. 3. Fixes: ba3501859354 ("Documentation/sphinx: fix kernel-doc extension on python3") Reference: http://mid.mail-archive.com/54c23e8e-89c0-5cea-0dcc-e938952c5642@infradead.org Reported-and-tested-by: Randy Dunlap <rdunlap@infradead.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2017-08-31x86/xen: Get rid of paravirt op adjust_exception_frameJuergen Gross
When running as Xen pv-guest the exception frame on the stack contains %r11 and %rcx additional to the other data pushed by the processor. Instead of having a paravirt op being called for each exception type prepend the Xen specific code to each exception entry. When running as Xen pv-guest just use the exception entry with prepended instructions, otherwise use the entry without the Xen specific code. [ tglx: Merged through tip to avoid ugly merge conflict ] Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: xen-devel@lists.xenproject.org Cc: boris.ostrovsky@oracle.com Cc: luto@amacapital.net Link: http://lkml.kernel.org/r/20170831174249.26853-1-jg@pfupf.net
2017-08-31x86/eisa: Add missing includeThomas Gleixner
The seperation of the EISA init missed to include linux/io.h which breaks the build with some special configurations. Reported-by: Ingo Molnar <mingo@kernel.org> Fixes: f7eaf6e00fd5 ("x86/boot: Move EISA setup to a separate file") Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-08-31x86: bpf_jit: small optimization in emit_bpf_tail_call()Eric Dumazet
Saves 4 bytes replacing following instructions : lea rax, [rsi + rdx * 8 + offsetof(...)] mov rax, qword ptr [rax] cmp rax, 0 by : mov rax, [rsi + rdx * 8 + offsetof(...)] test rax, rax Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-31samples/bpf: Fix compilation issue in redirect dummy programTariq Toukan
Fix compilation error below: $ make samples/bpf/ LLVM ERROR: 'xdp_redirect_dummy' label emitted multiple times to assembly file make[1]: *** [samples/bpf/xdp_redirect_kern.o] Error 1 make: *** [samples/bpf/] Error 2 Fixes: 306da4e685b4 ("samples/bpf: xdp_redirect load XDP dummy prog on TX device") Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-31net: fix two typos in net_device_ops documentation.Rami Rosen
This patch fixes two trivial typos in net_device_ops documentation, related to ndo_xdp_flush callback. Signed-off-by: Rami Rosen <rami.rosen@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-31Input: xpad - fix PowerA init quirk for some gamepad modelsCameron Gutman
The PowerA gamepad initialization quirk worked with the PowerA wired gamepad I had around (0x24c6:0x543a), but a user reported [0] that it didn't work for him, even though our gamepads shared the same vendor and product IDs. When I initially implemented the PowerA quirk, I wanted to avoid actually triggering the rumble action during init. My tests showed that my gamepad would work correctly even if it received a rumble of 0 intensity, so that's what I went with. Unfortunately, this apparently isn't true for all models (perhaps a firmware difference?). This non-working gamepad seems to require the real magic rumble packet that the Microsoft driver sends, which actually vibrates the gamepad. To counteract this effect, I still send the old zero-rumble PowerA quirk packet which cancels the rumble effect before the motors can spin up enough to vibrate. [0]: https://github.com/paroj/xpad/issues/48#issuecomment-313904867 Reported-by: Kyle Beauchamp <kyleabeauchamp@gmail.com> Tested-by: Kyle Beauchamp <kyleabeauchamp@gmail.com> Fixes: 81093c9848a7 ("Input: xpad - support some quirky Xbox One pads") Cc: stable@vger.kernel.org # v4.12 Signed-off-by: Cameron Gutman <aicommander@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-08-31net: dccp: Add handling of IPV6_PKTOPTIONS to dccp_v6_do_rcv()Andrii
Add handling of IPV6_PKTOPTIONS to dccp_v6_do_rcv() in net/dccp/ipv6.c, similar to the handling in net/ipv6/tcp_ipv6.c Signed-off-by: Andrii Vladyka <tulup@mail.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-31bridge: add tracepoint in br_fdb_updateRoopa Prabhu
This extends bridge fdb table tracepoints to also cover learned fdb entries in the br_fdb_update path. Note that unlike other tracepoints I have moved this to when the fdb is modified because this is in the datapath and can generate a lot of noise in the trace output. br_fdb_update is also called from added_by_user context in the NTF_USE case which is already traced ..hence the !added_by_user check. Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-31net_sched: add reverse binding for tc classCong Wang
TC filters when used as classifiers are bound to TC classes. However, there is a hidden difference when adding them in different orders: 1. If we add tc classes before its filters, everything is fine. Logically, the classes exist before we specify their ID's in filters, it is easy to bind them together, just as in the current code base. 2. If we add tc filters before the tc classes they bind, we have to do dynamic lookup in fast path. What's worse, this happens all the time not just once, because on fast path tcf_result is passed on stack, there is no way to propagate back to the one in tc filters. This hidden difference hurts performance silently if we have many tc classes in hierarchy. This patch intends to close this gap by doing the reverse binding when we create a new class, in this case we can actually search all the filters in its parent, match and fixup by classid. And because tcf_result is specific to each type of tc filter, we have to introduce a new ops for each filter to tell how to bind the class. Note, we still can NOT totally get rid of those class lookup in ->enqueue() because cgroup and flow filters have no way to determine the classid at setup time, they still have to go through dynamic lookup. Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-31Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo
ath.git patches for 4.14. Major changes: wil6210 * support FW RSSI reporting (by mistake this was accidentally mentioned already in the previous pull request, but now it's really included) * make debugfs optional, adds new Kconfig option CONFIG_WIL6210_DEBUGFS
2017-08-31i2c: designware: Round down ACPI provided clk to nearest supported clkHans de Goede
The Lenovo Miix2 8 DSDT contains an i2c clk / bus speed of 1700000 Hz for one if its devices, which is not supported. This is the second DSDT to show up with an unsupported clk in a short time, remove the hardcoded fix for DSDTs with a 1 MiHz clock and simply always round down the clk to the nearest supported value. Reported-by: russianneuromancer@ya.ru Fixes: 682c6c2188 ("i2c: designware: Some broken DSTDs use 1MiHz ...") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-08-31ath10k: configure and enable the wakeup capabilityRyan Hsu
ACPI will rely on device driver to tell it if the device could support wakeup function when system in D3 state. This has caused some platform can't support remote wakeup correctly, because the ACPI wakeup GPE is not enabled, hence registers the .set_wakeup callback to handle it if device supports wakeup. Tested with QCA6174 hw3.0, firmware ('WLAN.RM.4.4.1-00008-QCARMSWP-1') Signed-off-by: Ryan Hsu <ryanhsu@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-08-31ath10k: add the PCI PM core suspend/resume opsRyan Hsu
The actual PCI suspend/resume in ath10k has been handled in wow.c, but in the case of the device doesn't support remote wakeup, the .hif_suspend() and .hif_resume() will never be handled. ath10k_wow_op_suspend() { if (WARN_ON(!test_bit(ATH10K_FW_FEATURE_WOWLAN_SUPPORT, ar->running_fw->fw_file.fw_features))) { ret = 1; goto exit; } .... ret = ath10k_hif_suspend(ar); } So register the PCI PM core to support the suspend/resume if the device doesn't support remote wakeup. Signed-off-by: Ryan Hsu <ryanhsu@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-08-31Merge tag 'irqchip-4.14' of ↵Thomas Gleixner
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core Pull irqchip updates for 4.14 from Marc Zyngier: - irqchip-specific part of the monster GICv4 series - new UniPhier AIDET irqchip driver - new variants of some Freescale MSI widget - blanket removal of of_node->full_name in printk - random collection of fixes
2017-08-31ALSA: ctxfi: Remove null check before kfreeHimanshu Jha
kfree on NULL pointer is a no-op and therefore checking is redundant. Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-08-31tty: goldfish: Implement support for kernel 'earlycon' parameterMiodrag Dinic
Add early console functionality to the Goldfish tty driver. When 'earlycon' kernel command line parameter is used with no options, the early console is determined by the 'stdout-path' property in device tree's 'chosen' node. This is illustrated in the following device tree source example: Device tree example: chosen { stdout-path = "/goldfish_tty@1f004000"; }; goldfish_tty@1f004000 { interrupts = <0xc>; reg = <0x1f004000 0x0 0x1000>; compatible = "google,goldfish-tty"; }; Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com> Signed-off-by: Goran Ferenc <goran.ferenc@imgtec.com> Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-31tty: goldfish: Use streaming DMA for r/w operations on Ranchu platformsMiodrag Dinic
Implement tty r/w operations using streaming DMA. Goldfish tty for Ranchu platforms has been modified to use streaming DMA mappings for read/write operations. This change eliminates the need for snooping through the TLB in QEMU using cpu_get_phys_page_debug() which does not guarantee that it will return the valid va -> pa mapping. The streaming DMA mapping is implemented using dma_map_single() per transfer, while dma_unmap_single() is used for unmapping right after the DMA transfer. Using DMA API is the proper way for handling r/w transfers and makes this driver more portable, thus effectively eliminating the need for virt_to_page() and page_to_phys() conversions. This change does not affect the old style Goldfish tty behaviour which is still used by the Goldfish emulator. Version register has been added and probed to see which platform is running this driver. Reading from the new register GOLDFISH_TTY_REG_VERSION using the Goldfish emulator will return 0 and driver will work with virtual addresses. Whereas if run on Ranchu it returns 1, and thus DMA is used. (Goldfish and Ranchu are code names for the first and the second generation of virtual boards used by Android emulator.) Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com> Signed-off-by: Goran Ferenc <goran.ferenc@imgtec.com> Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-31tty: goldfish: Refactor constants to better reflect their natureAleksandar Markovic
Classify constants GOLDFISH_TTY_xxx into two groups: command ids and register offsets. Apply different naming for register offsets (add 'REG_' after 'GOLDFISH_TTY_' in constant names). Change implementation to use preprocessor's '#define' statements instead of 'enum' declaration (as this is more common way of implementation in such cases). This makes the driver code easier to follow and hopefully prevents future bugs. Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com> Signed-off-by: Goran Ferenc <goran.ferenc@imgtec.com> Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-31driver core: bus: Fix a potential double freeChristophe JAILLET
The .release function of driver_ktype is 'driver_release()'. This function frees the container_of this kobject. So, this memory must not be freed explicitly in the error handling path of 'bus_add_driver()'. Otherwise a double free will occur. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-31drivers: w1: add hwmon temp support for w1_thermJaghathiswari Rankappagounder Natarajan
This change adds hwmon temp support for w1_therm. Signed-off-by: Jaghathiswari Rankappagounder Natarajan <jaghu@google.com> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-31drivers: w1: refactor w1_slave_show to make the temp reading functionality ↵Jaghathiswari Rankappagounder Natarajan
separate Inside the w1_slave_show function refactor the code to read the temp into a separate function. Signed-off-by: Jaghathiswari Rankappagounder Natarajan <jaghu@google.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-31drivers: w1: add hwmon support structuresJaghathiswari Rankappagounder Natarajan
This patch has changes to w1.h/w1.c generic files to add (optional) hwmon support structures. Signed-off-by: Jaghathiswari Rankappagounder Natarajan <jaghu@google.com> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-31eeprom: idt_89hpesx: Support both ACPI and OF probingHuy Duong
Allow the idt_89hpesx driver to get information from child nodes from both OF and ACPI by using more generic fwnode_property_read*() functions. Below is an example of instantiating idt_89hpesx driver via ACPI Table: Device(IDT0) { Name(_HID, "PRP0001") Name(_CID, "PRP0001") Name(_CCA, ONE) Name(_STR, Unicode("IDT SW I2C Slave")) Name(_CRS, ResourceTemplate () { I2cSerialBus (0x74, ControllerInitiated, 1000, AddressingMode7Bit, "\\_SB.I2CS", 0x00, ResourceConsumer, , ) }) Name (_DSD, Package () { ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), Package () { Package () {"compatible", "idt,89hpes32nt8ag2"}, }, }) Device (EPR0) { Name (_DSD, Package () { ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), Package () { Package () {"compatible", "onsemi,24c64"}, Package () {"reg", 0x50}, } }) } } Signed-off-by: Huy Duong <qhuyduong@hotmail.com> Acked-by: Serge Semin <fancer.lancer@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-31mcb: Fix an error handling path in 'chameleon_parse_cells()'Christophe JAILLET
If 'chameleon_get_bar()' fails, we will return 0, which mean success. We should return the corresponding error code instead. Remove the useless initialisation of 'ret' which was hiding the issue. (if 'ret' is not set, gcc generates a warning ("warning: ‘ret’ may be used uninitialized in this function")) Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-31MCB: add support for SC31 to mcb-lpcMichael Moese
This patch adds the resources and DMI ID's for the MEN SC31, which uses a different address region to map the LPC bus than the one used for the existing SC24. Signed-off-by: Michael Moese <michael.moese@men.de> [jth add stable tag] Cc: <stable@vger.kernel.org> (v4.9+) Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-31serial: 8250_port: Remove useless NULL checksAndy Shevchenko
After switching to HR timers for RS485 the NULL checks for the object inside timer functions become useless. Remove them to avoid confusion to static analyzers. Fixes 6e0a5de2136b ("serial: 8250: Use hrtimers for rs485 delays") Cc: Colin Ian King <colin.king@canonical.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-31earlycon: initialise baud field of earlycon device structureEugeniy Paltsev
For now baud field of earlycon structure device is't initialised at all in of_setup_earlycon (in oppositе to register_earlycon). So when I use stdout-path to point earlycon device (like stdout-path = &serial or stdout-path = "serial:115200n8") baud field of earlycon device structure remains uninitialised and earlycon initialization is not performed correctly as of_setup_earlycon is used. When pass all arguments via bootargs (like bootargs = "earlycon=uart8250,mmio32,0xf0005000,115200n8") initialization is performed correctly as register_earlycon is used. So initialise baud field of earlycon device structure by value of "current-speed" property from device tree or from options (if they exist) when we use of_setup_earlycon Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-31staging: r8822be: Simplify deinit_priv()Larry Finger
Now that the extraneous debugging code is removed, routine deinit_priv() clearly contains code that serves no useful purpose. A null test before a call to kfree() and a spurious cast are also removed. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Ping-Ke Shih <pkshih@realtek.com> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-31staging: r8822be: Remove some dead codeLarry Finger
The code found inside an #ifdef CONFIG_RTL_DEBUG ... #endif section is left over from debugging of the original driver, and should be deleted. Reported by: Andreas Ziegler <andreas.ziegler@fau.de> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Ping-Ke Shih <pkshih@realtek.com> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-09-12 21:33:45 +0000