summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-08-05Merge tag 'master-2014-07-31' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next Conflicts: net/6lowpan/iphc.c Minor conflicts in iphc.c were changes overlapping with some style cleanups. John W. Linville says: ==================== Please pull this last(?) batch of wireless change intended for the 3.17 stream... For the NFC bits, Samuel says: "This is a rather quiet one, we have: - A new driver from ST Microelectronics for their NCI ST21NFCB, including device tree support. - p2p support for the ST21NFCA driver - A few fixes an enhancements for the NFC digital laye" For the Atheros bits, Kalle says: "Michal and Janusz did some important RX aggregation fixes, basically we were missing RX reordering altogether. The 10.1 firmware doesn't support Ad-Hoc mode and Michal fixed ath10k so that it doesn't advertise Ad-Hoc support with that firmware. Also he implemented a workaround for a KVM issue." For the Bluetooth bits, Gustavo and Johan say: "To quote Gustavo from his previous request: 'Some last minute fixes for -next. We have a fix for a use after free in RFCOMM, another fix to an issue with ADV_DIRECT_IND and one for ADV_IND with auto-connection handling. Last, we added support for reading the codec and MWS setting for controllers that support these features.' Additionally there are fixes to LE scanning, an update to conform to the 4.1 core specification as well as fixes for tracking the page scan state. All of these fixes are important for 3.17." And, "We've got: - 6lowpan fixes/cleanups - A couple crash fixes, one for the Marvell HCI driver and another in LE SMP. - Fix for an incorrect connected state check - Fix for the bondable requirement during pairing (an issue which had crept in because of using "pairable" when in fact the actual meaning was "bondable" (these have different meanings in Bluetooth)" Along with those are some late-breaking hardware support patches in brcmfmac and b43 as well as a stray ath9k patch. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-05svcrdma: remove rdma_create_qp() failure recovery logicSteve Wise
In svc_rdma_accept(), if rdma_create_qp() fails, there is useless logic to try and call rdma_create_qp() again with reduced sge depths. The assumption, I guess, was that perhaps the initial sge depths chosen were too big. However they initial depths are selected based on the rdma device attribute max_sge returned from ib_query_device(). If rdma_create_qp() fails, it would not be because the max_send_sge and max_recv_sge values passed in exceed the device's max. So just remove this code. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-08-05nfsd: add some comments to the nfsd4 object definitionsJeff Layton
Add some comments that describe what each of these objects is, and how they related to one another. Signed-off-by: Jeff Layton <jlayton@primarydata.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-08-05net/usb/hso: Add support for Option GTM671WFSRicardo Ribalda
After this patch: [ 32.985530] hso: drivers/net/usb/hso.c: Option Wireless [ 33.000452] hso 2-1.4:1.7: Not our interface [ 33.001849] usbcore: registered new interface driver hso root@qt5022:~# ls /dev/ttyHS* /dev/ttyHS0 /dev/ttyHS1 /dev/ttyHS2 /dev/ttyHS3 /dev/ttyHS4 /dev/ttyHS5 root@qt5022:~# lsusb -d 0af0: -vvv Bus 002 Device 003: ID 0af0:9200 Option Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 255 Vendor Specific Class bDeviceSubClass 255 Vendor Specific Subclass bDeviceProtocol 255 Vendor Specific Protocol bMaxPacketSize0 64 idVendor 0x0af0 Option idProduct 0x9200 bcdDevice 0.00 iManufacturer 3 Option N.V. iProduct 2 Globetrotter HSUPA Modem iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 200 bNumInterfaces 8 bConfigurationValue 1 iConfiguration 1 Option Configuration bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 2 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 3 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x84 EP 4 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x04 EP 4 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 4 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x85 EP 5 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x05 EP 5 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 5 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x06 EP 6 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x86 EP 6 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 6 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x87 EP 7 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 5 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x88 EP 8 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x07 EP 7 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 7 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk-Only iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x08 EP 8 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x89 EP 9 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 1 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 255 Vendor Specific Class bDeviceSubClass 255 Vendor Specific Subclass bDeviceProtocol 255 Vendor Specific Protocol bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0001 Self Powered Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-05net: smc911x: fix %d confusingly prefixed with 0x in format stringHans Wennborg
Signed-off-by: Hans Wennborg <hans@hanshq.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-05drivers: atm: fix %d confusingly prefixed with 0x in format stringsHans Wennborg
Signed-off-by: Hans Wennborg <hans@hanshq.net> Acked-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-05partitions: aix.c: off by one bugDan Carpenter
The lvip[] array has "state->limit" elements so the condition here should be >= instead of >. Fixes: 6ceea22bbbc8 ('partitions: add aix lvm partition support files') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-08-05nfsd: remove the client_mutex and the nfs4_lock/unlock_state wrappersJeff Layton
Signed-off-by: Jeff Layton <jlayton@primarydata.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-08-05ALSA: usb-audio: Whitespace cleanups for sound/usb/midi.*Adam Goode
Signed-off-by: Adam Goode <agoode@google.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-08-05ALSA: usb-audio: Respond to suspend and resume callbacks for MIDI inputAdam Goode
sound/usb/card.c registers USB suspend and resume but did not previously kill the input URBs. This means that USB MIDI devices left open across suspend/resume had non-functional input (output still usually worked, but it looks like that is another issue). Before this change, we would get ESHUTDOWN for each of the input URBs at suspend time, killing input. Signed-off-by: Adam Goode <agoode@google.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-08-05sound/oss/pss: Remove typedefs pss_mixerdata and pss_confdataHimangi Saraogi
The Linux kernel coding style guidelines suggest not using typedefs for structure types. This patch gets rid of the typedefs for pss_mixerdata and pss_confdata. The following Coccinelle semantic patch is used to make the change. @tn@ identifier i; type td; @@ -typedef struct i { ... } -td ; @@ type tn.td; identifier tn.i; @@ -td + struct i Signed-off-by: Himangi Saraogi <himangi774@gmail.com> Acked-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-08-05sound/oss/opl3: Remove typedef opl_devinfoHimangi Saraogi
This typedef is unnecessary and should just be removed as they are never used. The following Coccinelle semantic patch detects the case. @tn@ identifier i; type td; @@ -typedef struct i { ... } -td ; @@ type tn.td; identifier tn.i; @@ -td + struct i Signed-off-by: Himangi Saraogi <himangi774@gmail.com> Acked-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-08-05Merge branch 'for-next' of ↵Mark Brown
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap into regulator-next
2014-08-05Add worker function to set allocation sizeSteve French
Adds setinfo worker function for SMB2/SMB3 support of SET_ALLOCATION_INFORMATION Signed-off-by: Steve French <smfrench@gmail.com> Reviewed-by: Pavel Shilovsky <pshilovsky@samba.org>
2014-08-05drm: mark drm_context support as legacyDavid Herrmann
This renames all drm-context helpers to drm_legacy_*() and moves the internal definitions into the new drm_legacy.h header. This header is local to DRM-core and drivers shouldn't access it. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
2014-08-05Merge remote-tracking branches 'regulator/topic/tps65217', ↵Mark Brown
'regulator/topic/tps65218', 'regulator/topic/tps6586x' and 'regulator/topic/twl' into regulator-next
2014-08-05Merge remote-tracking branches 'regulator/topic/s2mps11', ↵Mark Brown
'regulator/topic/s2mpu02', 'regulator/topic/s5m8767' and 'regulator/topic/tps65090' into regulator-next
2014-08-05Merge remote-tracking branches 'regulator/topic/lp8755', ↵Mark Brown
'regulator/topic/ltc3589', 'regulator/topic/max8952', 'regulator/topic/mc13xxx' and 'regulator/topic/palmas' into regulator-next
2014-08-05Merge remote-tracking branches 'regulator/topic/da9211', ↵Mark Brown
'regulator/topic/getreg', 'regulator/topic/gpio' and 'regulator/topic/lp872x' into regulator-next
2014-08-05Merge remote-tracking branches 'regulator/topic/88pm800', ↵Mark Brown
'regulator/topic/ab8500', 'regulator/topic/act8865', 'regulator/topic/as3722' and 'regulator/topic/bcm590xx' into regulator-next
2014-08-05Merge remote-tracking branch 'regulator/topic/core' into regulator-nextMark Brown
2014-08-05Merge remote-tracking branches 'regulator/fix/act8865', ↵Mark Brown
'regulator/fix/arizona' and 'regulator/fix/tps65218' into regulator-linus
2014-08-05Merge remote-tracking branch 'regulator/fix/act8865' into regulator-act8865Mark Brown
Conflicts: drivers/regulator/act8865-regulator.c
2014-08-05Merge branch 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds
Pull ARM updates from Russell King: "Included in this update: - perf updates from Will Deacon: The main changes are callchain stability fixes from Jean Pihet and event mapping and PMU name rework from Mark Rutland The latter is preparatory work for enabling some code re-use with arm64 in the future. - updates for nommu from Uwe Kleine-König: Two different fixes for the same problem making some ARM nommu configurations not boot since 3.6-rc1. The problem is that user_addr_max returned the biggest available RAM address which makes some copy_from_user variants fail to read from XIP memory. - deprecate legacy OMAP DMA API, in preparation for it's removal. The popular drivers have been converted over, leaving a very small number of rarely used drivers, which hopefully can be converted during the next cycle with a bit more visibility (and hopefully people popping out of the woodwork to help test) - more tweaks for BE systems, particularly with the kernel image format. In connection with this, I've cleaned up the way we generate the linker script for the decompressor. - removal of hard-coded assumptions of the kernel stack size, making everywhere depend on the value of THREAD_SIZE_ORDER. - MCPM updates from Nicolas Pitre. - Make it easier for proper CPU part number checks (which should always include the vendor field). - Assembly code optimisation - use the "bx" instruction when returning from a function on ARMv6+ rather than "mov pc, reg". - Save the last kernel misaligned fault location and report it via the procfs alignment file. - Clean up the way we create the initial stack frame, which is a repeated pattern in several different locations. - Support for 8-byte get_user(), needed for some DRM implementations. - mcs locking from Will Deacon. - Save and restore a few more Cortex-A9 registers (for errata workarounds) - Fix various aspects of the SWP emulation, and the ELF hwcap for the SWP instruction. - Update LPAE logic for pte_write and pmd_write to make it more correct. - Support for Broadcom Brahma15 CPU cores. - ARM assembly crypto updates from Ard Biesheuvel" * 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (53 commits) ARM: add comments to the early page table remap code ARM: 8122/1: smp_scu: enable SCU standby support ARM: 8121/1: smp_scu: use macro for SCU enable bit ARM: 8120/1: crypto: sha512: add ARM NEON implementation ARM: 8119/1: crypto: sha1: add ARM NEON implementation ARM: 8118/1: crypto: sha1/make use of common SHA-1 structures ARM: 8113/1: remove remaining definitions of PLAT_PHYS_OFFSET from <mach/memory.h> ARM: 8111/1: Enable erratum 798181 for Broadcom Brahma-B15 ARM: 8110/1: do CPU-specific init for Broadcom Brahma15 cores ARM: 8109/1: mm: Modify pte_write and pmd_write logic for LPAE ARM: 8108/1: mm: Introduce {pte,pmd}_isset and {pte,pmd}_isclear ARM: hwcap: disable HWCAP_SWP if the CPU advertises it has exclusives ARM: SWP emulation: only initialise on ARMv7 CPUs ARM: SWP emulation: always enable when SMP is enabled ARM: 8103/1: save/restore Cortex-A9 CP15 registers on suspend/resume ARM: 8098/1: mcs lock: implement wfe-based polling for MCS locking ARM: 8091/2: add get_user() support for 8 byte types ARM: 8097/1: unistd.h: relocate comments back to place ARM: 8096/1: Describe required sort order for textofs-y (TEXT_OFFSET) ARM: 8090/1: add revision info for PL310 errata 588369 and 727915 ...
2014-08-05regulator: act8865: fix build when OF is not enabledBeniamino Galvani
act8846_matches and act8865_matches are defined only when OF is enabled. Move references to them to the act8865_pdata_from_dt() function to avoid a build error when OF is disabled. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-08-05regulator: act8865: add act8846 to DT binding documentationBeniamino Galvani
This patch adds a new "active-semi,act8846" compatible string and a list of supported regulator names to the devicetree binding documentation for Active-Semi PMUs. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Reviewed-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-08-05regulator: act8865: add support for act8846Beniamino Galvani
Add device id and definition of registers and regulators to support the act8846 PMU. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Tested-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-08-05regulator: act8865: prepare support for other act88xx devicesBeniamino Galvani
This patch prepares support for other devices in the act88xx family of PMUs manufactured by Active-Semi. http://www.active-semi.com/products/power-management-units/act88xx/ Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Tested-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-08-05regulator: act8865: set correct number of regulators in pdataBeniamino Galvani
act8865_pdata_from_dt() populates the array pdata->regulators with all the regulators and then assigns the field init_data only for the ones actually found in the DT. The patch changes the value assigned to pdata->num_regulators to match the size of the array. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Tested-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-08-05regulator: act8865: Remove error variable in act8865_pmic_probeAxel Lin
Simply use ret variable instead. Also remove unneeded initialize for ret variable. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-08-05regulator: act8865: fix parsing of platform dataBeniamino Galvani
The driver loops through all available regulators (ACT8865_REG_NUM) and accesses pdata->regulators[i].platform_data without checking the actual value of num_regulators in platform data, potentially causing a invalid memory access. Fix this and look up the regulator init_data by id in platform data. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Tested-by Wenyou.Yang <wenyou.yang@atmel.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-08-05Merge branch 'for-jens' of http://evilpiepirate.org/git/linux-bcache into ↵Jens Axboe
for-3.17/drivers Kent writes: Hey Jens, here's the pull request for 3.17 - typically late, but lots of tasty fixes in this one.
2014-08-05Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu Pull m68knommu fixes from Greg Ungerer: "Just a couple of small fixes. Fix definition of page_to_phys() and remove unecesary prototype of kobjsize()" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68knommu: Remove unnecessary prototype for kobjsize() m68knommu: Correct page_to_phys when PAGE_OFFSET is non-zero.
2014-08-05dmaengine: nbpf_error_get_channel() can be staticFengguang Wu
CC: Guennadi Liakhovetski <g.liakhovetski@gmx.de> CC: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-08-05drm/radeon: Prevent hdmi deep color if max_tmds_clock is undefined.Mario Kleiner
HDMI spec requires a valid max_tmds_clock from edid for hdmi deep color modes. If a sink violates this, disable deep color. Also add a hint to user about the deep_color module parameter if deep color is disabled due to that. Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-08-05nfsd: remove nfs4_lock_state: nfs4_state_shutdown_netJeff Layton
Signed-off-by: Jeff Layton <jlayton@primarydata.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-08-05nfsd: remove nfs4_lock_state: nfs4_laundromatJeff Layton
Signed-off-by: Jeff Layton <jlayton@primarydata.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-08-05nfsd: Remove nfs4_lock_state(): reclaim_complete()Trond Myklebust
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-08-05nfsd: Remove nfs4_lock_state(): setclientid, setclientid_confirm, renewTrond Myklebust
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-08-05nfsd: Remove nfs4_lock_state(): exchange_id, create/destroy_session()Trond Myklebust
Also destroy_clientid and bind_conn_to_session. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-08-05nfsd: Remove nfs4_lock_state(): nfsd4_open and nfsd4_open_confirmTrond Myklebust
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-08-05nfsd: Remove nfs4_lock_state(): nfsd4_delegreturn()Trond Myklebust
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-08-05nfsd: Remove nfs4_lock_state(): nfsd4_open_downgrade + nfsd4_closeTrond Myklebust
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-08-05nfsd: Remove nfs4_lock_state(): nfsd4_lock/locku/lockt()Trond Myklebust
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-08-05nfsd: Remove nfs4_lock_state(): nfsd4_release_lockownerTrond Myklebust
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-08-05nfsd: Remove nfs4_lock_state(): nfsd4_test_stateid/nfsd4_free_stateidTrond Myklebust
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-08-05nfsd: Remove nfs4_lock_state(): nfs4_preprocess_stateid_op()Trond Myklebust
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-08-05nfsd: remove old fault injection infrastructureJeff Layton
Remove the old nfsd_for_n_state function and move nfsd_find_client higher up into the file to get rid of forward declaration. Remove the struct nfsd_fault_inject_op arguments from the operations as they are no longer needed by any of them. Finally, remove the old "standard" get and set routines, which also eliminates the client_mutex from this code. Signed-off-by: Jeff Layton <jlayton@primarydata.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-08-05nfsd: add more granular locking to *_delegations fault injectorsJeff Layton
...instead of relying on the client_mutex. Signed-off-by: Jeff Layton <jlayton@primarydata.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-08-05nfsd: add more granular locking to forget_openowners fault injectorJeff Layton
...instead of relying on the client_mutex. Also, fix up the printk output that is generated when the file is read. It currently says that it's reporting the number of open files, but it's actually reporting the number of openowners. Signed-off-by: Jeff Layton <jlayton@primarydata.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-18 05:58:04 +0000