summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-10-19PM / devfreq: rockchip-dfi: add support for RK3588Sascha Hauer
Add support for the RK3588 to the driver. The RK3588 has four DDR channels with a register stride of 0x4000 between the channel registers, also it has a DDRMON_CTRL register per channel. Link: https://lore.kernel.org/all/20231018061714.3553817-20-s.hauer@pengutronix.de/ Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2023-10-19PM / devfreq: rockchip-dfi: account for multiple DDRMON_CTRL registersSascha Hauer
The currently supported RK3399 has a set of registers per channel, but it has only a single DDRMON_CTRL register. With upcoming RK3588 this will be different, the RK3588 has a DDRMON_CTRL register per channel. Instead of expecting a single DDRMON_CTRL register, loop over the channels and write the channel specific DDRMON_CTRL register. Break out early out of the loop when there is only a single DDRMON_CTRL register like on the RK3399. Link: https://lore.kernel.org/all/20231018061714.3553817-19-s.hauer@pengutronix.de/ Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2023-10-19PM / devfreq: rockchip-dfi: make register stride SoC specificSascha Hauer
The currently supported RK3399 has a stride of 20 between the channel specific registers. Upcoming RK3588 has a different stride, so put the stride into driver data to make it configurable. While at it convert decimal 20 to hex 0x14 for consistency with RK3588 which has a register stride 0x4000 and we want to write that in hex as well. Link: https://lore.kernel.org/all/20231018061714.3553817-18-s.hauer@pengutronix.de/ Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2023-10-19PM / devfreq: rockchip-dfi: Add perf supportSascha Hauer
The DFI is a unit which is suitable for measuring DDR utilization, but so far it could only be used as an event driver for the DDR frequency scaling driver. This adds perf support to the DFI driver. Usage with the 'perf' tool can look like: perf stat -a -e rockchip_ddr/cycles/,\ rockchip_ddr/read-bytes/,\ rockchip_ddr/write-bytes/,\ rockchip_ddr/bytes/ sleep 1 Performance counter stats for 'system wide': 1582524826 rockchip_ddr/cycles/ 1802.25 MB rockchip_ddr/read-bytes/ 1793.72 MB rockchip_ddr/write-bytes/ 3595.90 MB rockchip_ddr/bytes/ 1.014369709 seconds time elapsed perf support has been tested on a RK3568 and a RK3399, the latter with dual channel DDR. Link: https://lore.kernel.org/all/20231019064819.3496740-1-s.hauer@pengutronix.de/ Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> [cw00.choi: Fix typo from 'write_acccess' to 'write_access'] Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2023-10-19PM / devfreq: rockchip-dfi: give variable a better nameSascha Hauer
struct dmc_count_channel::total counts the clock cycles of the DDR controller. Rename it accordingly to give the reader a better idea what this is about. While at it, at some documentation to struct dmc_count_channel. Link: https://lore.kernel.org/all/20231018061714.3553817-16-s.hauer@pengutronix.de/ Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2023-10-19PM / devfreq: rockchip-dfi: Prepare for multiple usersSascha Hauer
When adding perf support later the DFI must be enabled when either of devfreq-event or perf is active. Prepare for that by adding a usage counter for the DFI. Also move enabling and disabling of the clock away from the devfreq-event specific functions to which the perf specific part won't have access. Link: https://lore.kernel.org/all/20231018061714.3553817-15-s.hauer@pengutronix.de/ Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2023-10-19PM / devfreq: rockchip-dfi: Pass private data struct to internal functionsSascha Hauer
The internal functions do not need the struct devfreq_event_dev *, so pass them the struct rockchip_dfi *. This is a preparation for adding perf support later which doesn't have a struct devfreq_event_dev *. Link: https://lore.kernel.org/all/20231018061714.3553817-14-s.hauer@pengutronix.de/ Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2023-10-19PM / devfreq: rockchip-dfi: Handle LPDDR4XSascha Hauer
In the DFI driver LPDDR4X can be handled in the same way as LPDDR4. Add the missing case. Link: https://lore.kernel.org/all/20231018061714.3553817-13-s.hauer@pengutronix.de/ Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2023-10-19PM / devfreq: rockchip-dfi: Handle LPDDR2 correctlySascha Hauer
According to the downstream driver the DDRMON_CTRL_LPDDR23 bit must be set for both LPDDR2 and LPDDR3. Add the missing LPDDR2 case and while at it turn the if/else if/else into switch/case which makes it easier to read. Link: https://lore.kernel.org/all/20231018061714.3553817-12-s.hauer@pengutronix.de/ Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2023-10-19PM / devfreq: rockchip-dfi: Add RK3568 supportSascha Hauer
This adds RK3568 support to the DFI driver. Only iniitialization differs from the currently supported RK3399. Link: https://lore.kernel.org/all/20231018061714.3553817-11-s.hauer@pengutronix.de/ Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2023-10-19PM / devfreq: rockchip-dfi: Clean up DDR type register definesSascha Hauer
Use the HIWORD_UPDATE() define known from other rockchip drivers to make the defines look less odd to the readers who've seen other rockchip drivers. The HIWORD registers have their functional bits in the lower 16 bits whereas the upper 16 bits contain a mask. Only the functional bits that have the corresponding mask bit set are modified during a write. Although the register writes look different, the end result should be the same, at least there's no functional change intended with this patch. Link: https://lore.kernel.org/all/20231018061714.3553817-10-s.hauer@pengutronix.de/ Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2023-10-19PM / devfreq: rk3399_dmc,dfi: generalize DDRTYPE definesSascha Hauer
The DDRTYPE defines are named to be RK3399 specific, but they can be used for other Rockchip SoCs as well, so replace the RK3399_PMUGRF_ prefix with ROCKCHIP_. They are defined in a SoC specific header file, so when generalizing the prefix also move the new defines to a SoC agnostic header file. While at it use GENMASK to define the DDRTYPE bitfield and give it a name including the full register name. Link: https://lore.kernel.org/all/20231018061714.3553817-9-s.hauer@pengutronix.de/ Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2023-10-18PM / devfreq: rockchip-dfi: introduce channel maskSascha Hauer
Different Rockchip SoC variants have a different number of channels. Introduce a channel mask to make the number of channels configurable from SoC initialization code. Link: https://lore.kernel.org/all/20231018061714.3553817-8-s.hauer@pengutronix.de/ Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2023-10-18PM / devfreq: rockchip-dfi: Use free running counterSascha Hauer
The DDR_MON counters are free running counters. These are resetted to 0 when starting them over like currently done when reading the current counter values. Resetting the counters becomes a problem with perf support we want to add later, because perf needs counters that are not modified elsewhere. This patch removes resetting the counters and keeps them running instead. That means we no longer use the absolute counter values but instead compare them with the counter values we read last time. Not stopping the counters also has the impact that they are running while we are reading them. We cannot read multiple timers atomically, so the values do not exactly fit together. The effect should be negligible though as the time between two measurements is some orders of magnitude bigger than the time we need to read multiple registers. Link: https://lore.kernel.org/all/20231018061714.3553817-7-s.hauer@pengutronix.de/ Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2023-10-17PM / devfreq: mediatek: unlock on error in mtk_ccifreq_target()Dan Carpenter
Call mutex_unlock(&drv->reg_lock) before returning the error code. Link: https://lore.kernel.org/all/1bada9b2-d276-4123-bfdf-03d165569543@moroto.mountain/ Fixes: d2805601988f ("PM / devfreq: mediatek: protect oop in critical session") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2023-10-09PM / devfreq: exynos-ppmu: Use device_get_match_data()Rob Herring
Use preferred device_get_match_data() instead of of_match_device() to get the driver match data. With this, adjust the includes to explicitly include the correct headers. Link: https://lore.kernel.org/all/20231006213854.333261-1-robh@kernel.org/ Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2023-10-09PM / devfreq: rockchip-dfi: dfi store raw values in counter structSascha Hauer
When adding perf support to the DFI driver the perf part will need the raw counter values, so move the fixed * 4 factor to rockchip_dfi_get_event(). Link: https://lore.kernel.org/lkml/20230704093242.583575-6-s.hauer@pengutronix.de/ Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2023-10-09PM / devfreq: rockchip-dfi: Add SoC specific init functionSascha Hauer
Move the RK3399 specifics to a SoC specific init function to make the way free for supporting other SoCs later. Link: https://lore.kernel.org/lkml/20230704093242.583575-5-s.hauer@pengutronix.de/ Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2023-10-09PM / devfreq: rockchip-dfi: use consistent name for private data structSascha Hauer
The variable name for the private data struct is 'info' in some functions and 'data' in others. Both names do not give a clue what type the variable has, so consistently use 'dfi'. Link: https://lore.kernel.org/lkml/20230704093242.583575-4-s.hauer@pengutronix.de/ Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2023-10-09PM / devfreq: rockchip-dfi: Embed desc into private data structSascha Hauer
No need for an extra allocation, just embed the struct devfreq_event_desc into the private data struct. Link: https://lore.kernel.org/lkml/20230704093242.583575-3-s.hauer@pengutronix.de/ Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2023-10-09PM / devfreq: rockchip-dfi: Make pmu regmap mandatorySascha Hauer
As a matter of fact the regmap_pmu already is mandatory because it is used unconditionally in the driver. Bail out gracefully in probe() rather than crashing later. Link: https://lore.kernel.org/lkml/20230704093242.583575-2-s.hauer@pengutronix.de/ Fixes: b9d1262bca0af ("PM / devfreq: event: support rockchip dfi controller") Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2023-10-09PM / devfreq: Switch to dev_pm_opp_find_freq_{ceil/floor}_indexed() APIsManivannan Sadhasivam
Some devfreq consumers like UFS driver need to work with multiple clocks through the OPP framework. For this reason, OPP framework exposes the _indexed() APIs for finding the floor/ceil of the supplied frequency of the indexed clock. So let's use them in the devfreq driver. Currently, the clock index of 0 is used which works fine for multiple as well as single clock. Link: https://lore.kernel.org/all/20231003111232.42663-3-manivannan.sadhasivam@linaro.org/ Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2023-10-09PM / devfreq: mediatek: protect oop in critical sessionMark Tseng
mtk_ccifreq_opp_notifier is reenter function when policy0 / policy6 change freq, so mutex_lock should protect all OPP event. Link: https://lore.kernel.org/lkml/20230818021741.6173-1-chun-jen.tseng@mediatek.com/T/ Signed-off-by: Mark Tseng <chun-jen.tseng@mediatek.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2023-10-01Linux 6.6-rc4v6.6-rc4Linus Torvalds
2023-10-01Merge tag 'kbuild-fixes-v6.6-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Fix the module compression with xz so the in-kernel decompressor works - Document a kconfig idiom to express an optional dependency between modules - Make modpost, when W=1 is given, detect broken drivers that reference .exit.* sections - Remove unused code * tag 'kbuild-fixes-v6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: remove stale code for 'source' symlink in packaging scripts modpost: Don't let "driver"s reference .exit.* vmlinux.lds.h: remove unused CPU_KEEP and CPU_DISCARD macros modpost: add missing else to the "of" check Documentation: kbuild: explain handling optional dependencies kbuild: Use CRC32 and a 1MiB dictionary for XZ compressed modules
2023-10-01Merge tag 'mm-hotfixes-stable-2023-10-01-08-34' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc fixes from Andrew Morton: "Fourteen hotfixes, eleven of which are cc:stable. The remainder pertain to issues which were introduced after 6.5" * tag 'mm-hotfixes-stable-2023-10-01-08-34' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: Crash: add lock to serialize crash hotplug handling selftests/mm: fix awk usage in charge_reserved_hugetlb.sh and hugetlb_reparenting_test.sh that may cause error mm: mempolicy: keep VMA walk if both MPOL_MF_STRICT and MPOL_MF_MOVE are specified mm/damon/vaddr-test: fix memory leak in damon_do_test_apply_three_regions() mm, memcg: reconsider kmem.limit_in_bytes deprecation mm: zswap: fix potential memory corruption on duplicate store arm64: hugetlb: fix set_huge_pte_at() to work with all swap entries mm: hugetlb: add huge page size param to set_huge_pte_at() maple_tree: add MAS_UNDERFLOW and MAS_OVERFLOW states maple_tree: add mas_is_active() to detect in-tree walks nilfs2: fix potential use after free in nilfs_gccache_submit_read_data() mm: abstract moving to the next PFN mm: report success more often from filemap_map_folio_range() fs: binfmt_elf_efpic: fix personality for ELF-FDPIC
2023-10-01Merge tag 'char-misc-6.6-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull misc driver fix from Greg KH: "Here is a single, much requested, fix for a set of misc drivers to resolve a much reported regression in the -rc series that has also propagated back to the stable releases. Sorry for the delay, lots of conference travel for a few weeks put me very far behind in patch wrangling. It has been reported by many to resolve the reported problem, and has been in linux-next with no reported issues" * tag 'char-misc-6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: misc: rtsx: Fix some platforms can not boot and move the l1ss judgment to probe
2023-10-01Merge tag 'tty-6.6-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty / serial driver fixes from Greg KH: "Here are two tty/serial driver fixes for 6.6-rc4 that resolve some reported regressions: - revert a n_gsm change that ended up causing problems - 8250_port fix for irq data both have been in linux-next for over a week with no reported problems" * tag 'tty-6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: Revert "tty: n_gsm: fix UAF in gsm_cleanup_mux" serial: 8250_port: Check IRQ data before use
2023-10-01Merge tag 'x86-urgent-2023-10-01' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Misc fixes: a kerneldoc build warning fix, add SRSO mitigation for AMD-derived Hygon processors, and fix a SGX kernel crash in the page fault handler that can trigger when ksgxd races to reclaim the SECS special page, by making the SECS page unswappable" * tag 'x86-urgent-2023-10-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/sgx: Resolves SECS reclaim vs. page fault for EAUG race x86/srso: Add SRSO mitigation for Hygon processors x86/kgdb: Fix a kerneldoc warning when build with W=1
2023-10-01Merge tag 'timers-urgent-2023-10-01' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fix from Ingo Molnar: "Fix a spurious kernel warning during CPU hotplug events that may trigger when timer/hrtimer softirqs are pending, which are otherwise hotplug-safe and don't merit a warning" * tag 'timers-urgent-2023-10-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timers: Tag (hr)timer softirq as hotplug safe
2023-10-01Merge tag 'sched-urgent-2023-10-01' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fix from Ingo Molnar: "Fix a RT tasks related lockup/live-lock during CPU offlining" * tag 'sched-urgent-2023-10-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/rt: Fix live lock between select_fallback_rq() and RT push
2023-10-01Merge tag 'perf-urgent-2023-10-01' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf event fixes from Ingo Molnar: "Misc fixes: work around an AMD microcode bug on certain models, and fix kexec kernel PMI handlers on AMD systems that get loaded on older kernels that have an unexpected register state" * tag 'perf-urgent-2023-10-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/amd: Do not WARN() on every IRQ perf/x86/amd/core: Fix overflow reset on hotplug
2023-10-01kbuild: remove stale code for 'source' symlink in packaging scriptsMasahiro Yamada
Since commit d8131c2965d5 ("kbuild: remove $(MODLIB)/source symlink"), modules_install does not create the 'source' symlink. Remove the stale code from builddeb and kernel.spec. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-10-01modpost: Don't let "driver"s reference .exit.*Uwe Kleine-König
Drivers must not reference functions marked with __exit as these likely are not available when the code is built-in. There are few creative offenders uncovered for example in ARCH=amd64 allmodconfig builds. So only trigger the section mismatch warning for W=1 builds. The dual rule that drivers must not reference .init.* is implemented since commit 0db252452378 ("modpost: don't allow *driver to reference .init.*") which however missed that .exit.* should be handled in the same way. Thanks to Masahiro Yamada and Arnd Bergmann who gave valuable hints to find this improvement. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-10-01vmlinux.lds.h: remove unused CPU_KEEP and CPU_DISCARD macrosMasahiro Yamada
Remove the left-over of commit e24f6628811e ("modpost: remove all traces of cpuinit/cpuexit sections"). Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2023-10-01modpost: add missing else to the "of" checkMauricio Faria de Oliveira
Without this 'else' statement, an "usb" name goes into two handlers: the first/previous 'if' statement _AND_ the for-loop over 'devtable', but the latter is useless as it has no 'usb' device_id entry anyway. Tested with allmodconfig before/after patch; no changes to *.mod.c: git checkout v6.6-rc3 make -j$(nproc) allmodconfig make -j$(nproc) olddefconfig make -j$(nproc) find . -name '*.mod.c' | cpio -pd /tmp/before # apply patch make -j$(nproc) find . -name '*.mod.c' | cpio -pd /tmp/after diff -r /tmp/before/ /tmp/after/ # no difference Fixes: acbef7b76629 ("modpost: fix module autoloading for OF devices with generic compatible property") Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-09-30Merge tag 'soc-fixes-6.6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "These are the latest bug fixes that have come up in the soc tree. Most of these are fairly minor. Most notably, the majority of changes this time are not for dts files as usual. - Updates to the addresses of the broadcom and aspeed entries in the MAINTAINERS file. - Defconfig updates to address a regression on samsung and a build warning from an unknown Kconfig symbol - Build fixes for the StrongARM and Uniphier platforms - Code fixes for SCMI and FF-A firmware drivers, both of which had a simple bug that resulted in invalid data, and a lesser fix for the optee firmware driver - Multiple fixes for the recently added loongson/loongarch "guts" soc driver - Devicetree fixes for RISC-V on the startfive platform, addressing issues with NOR flash, usb and uart. - Multiple fixes for NXP i.MX8/i.MX9 dts files, fixing problems with clock, gpio, hdmi settings and the Makefile - Bug fixes for i.MX firmware code and the OCOTP soc driver - Multiple fixes for the TI sysc bus driver - Minor dts updates for TI omap dts files, to address boot time warnings and errors" * tag 'soc-fixes-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (35 commits) MAINTAINERS: Fix Florian Fainelli's email address arm64: defconfig: enable syscon-poweroff driver ARM: locomo: fix locomolcd_power declaration soc: loongson: loongson2_guts: Remove unneeded semicolon soc: loongson: loongson2_guts: Convert to devm_platform_ioremap_resource() soc: loongson: loongson_pm2: Populate children syscon nodes dt-bindings: soc: loongson,ls2k-pmc: Allow syscon-reboot/syscon-poweroff as child soc: loongson: loongson_pm2: Drop useless of_device_id compatible dt-bindings: soc: loongson,ls2k-pmc: Use fallbacks for ls2k-pmc compatible soc: loongson: loongson_pm2: Add dependency for INPUT arm64: defconfig: remove CONFIG_COMMON_CLK_NPCM8XX=y ARM: uniphier: fix cache kernel-doc warnings MAINTAINERS: aspeed: Update Andrew's email address MAINTAINERS: aspeed: Update git tree URL firmware: arm_ffa: Don't set the memory region attributes for MEM_LEND arm64: dts: imx: Add imx8mm-prt8mm.dtb to build arm64: dts: imx8mm-evk: Fix hdmi@3d node soc: imx8m: Enable OCOTP clock for imx8mm before reading registers arm64: dts: imx8mp-beacon-kit: Fix audio_pll2 clock arm64: dts: imx8mp: Fix SDMA2/3 clocks ...
2023-09-30Merge tag 'trace-v6.6-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull tracing fixes from Steven Rostedt: - Make sure 32-bit applications using user events have aligned access when running on a 64-bit kernel. - Add cond_resched in the loop that handles converting enums in print_fmt string is trace events. - Fix premature wake ups of polling processes in the tracing ring buffer. When a task polls waiting for a percentage of the ring buffer to be filled, the writer still will wake it up at every event. Add the polling's percentage to the "shortest_full" list to tell the writer when to wake it up. - For eventfs dir lookups on dynamic events, an event system's only event could be removed, leaving its dentry with no children. This is totally legitimate. But in eventfs_release() it must not access the children array, as it is only allocated when the dentry has children. * tag 'trace-v6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: eventfs: Test for dentries array allocated in eventfs_release() tracing/user_events: Align set_bit() address for all archs tracing: relax trace_event_eval_update() execution with cond_resched() ring-buffer: Update "shortest_full" in polling
2023-09-30eventfs: Test for dentries array allocated in eventfs_release()Steven Rostedt (Google)
The dcache_dir_open_wrapper() could be called when a dynamic event is being deleted leaving a dentry with no children. In this case the dlist->dentries array will never be allocated. This needs to be checked for in eventfs_release(), otherwise it will trigger a NULL pointer dereference. Link: https://lore.kernel.org/linux-trace-kernel/20230930090106.1c3164e9@rorschach.local.home Cc: Mark Rutland <mark.rutland@arm.com> Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Fixes: ef36b4f92868 ("eventfs: Remember what dentries were created on dir open") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2023-09-30tracing/user_events: Align set_bit() address for all archsBeau Belgrave
All architectures should use a long aligned address passed to set_bit(). User processes can pass either a 32-bit or 64-bit sized value to be updated when tracing is enabled when on a 64-bit kernel. Both cases are ensured to be naturally aligned, however, that is not enough. The address must be long aligned without affecting checks on the value within the user process which require different adjustments for the bit for little and big endian CPUs. Add a compat flag to user_event_enabler that indicates when a 32-bit value is being used on a 64-bit kernel. Long align addresses and correct the bit to be used by set_bit() to account for this alignment. Ensure compat flags are copied during forks and used during deletion clears. Link: https://lore.kernel.org/linux-trace-kernel/20230925230829.341-2-beaub@linux.microsoft.com Link: https://lore.kernel.org/linux-trace-kernel/20230914131102.179100-1-cleger@rivosinc.com/ Cc: stable@vger.kernel.org Fixes: 7235759084a4 ("tracing/user_events: Use remote writes for event enablement") Reported-by: Clément Léger <cleger@rivosinc.com> Suggested-by: Clément Léger <cleger@rivosinc.com> Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2023-09-30tracing: relax trace_event_eval_update() execution with cond_resched()Clément Léger
When kernel is compiled without preemption, the eval_map_work_func() (which calls trace_event_eval_update()) will not be preempted up to its complete execution. This can actually cause a problem since if another CPU call stop_machine(), the call will have to wait for the eval_map_work_func() function to finish executing in the workqueue before being able to be scheduled. This problem was observe on a SMP system at boot time, when the CPU calling the initcalls executed clocksource_done_booting() which in the end calls stop_machine(). We observed a 1 second delay because one CPU was executing eval_map_work_func() and was not preempted by the stop_machine() task. Adding a call to cond_resched() in trace_event_eval_update() allows other tasks to be executed and thus continue working asynchronously like before without blocking any pending task at boot time. Link: https://lore.kernel.org/linux-trace-kernel/20230929191637.416931-1-cleger@rivosinc.com Cc: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Clément Léger <cleger@rivosinc.com> Tested-by: Atish Patra <atishp@rivosinc.com> Reviewed-by: Atish Patra <atishp@rivosinc.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2023-09-30ring-buffer: Update "shortest_full" in pollingSteven Rostedt (Google)
It was discovered that the ring buffer polling was incorrectly stating that read would not block, but that's because polling did not take into account that reads will block if the "buffer-percent" was set. Instead, the ring buffer polling would say reads would not block if there was any data in the ring buffer. This was incorrect behavior from a user space point of view. This was fixed by commit 42fb0a1e84ff by having the polling code check if the ring buffer had more data than what the user specified "buffer percent" had. The problem now is that the polling code did not register itself to the writer that it wanted to wait for a specific "full" value of the ring buffer. The result was that the writer would wake the polling waiter whenever there was a new event. The polling waiter would then wake up, see that there's not enough data in the ring buffer to notify user space and then go back to sleep. The next event would wake it up again. Before the polling fix was added, the code would wake up around 100 times for a hackbench 30 benchmark. After the "fix", due to the constant waking of the writer, it would wake up over 11,0000 times! It would never leave the kernel, so the user space behavior was still "correct", but this definitely is not the desired effect. To fix this, have the polling code add what it's waiting for to the "shortest_full" variable, to tell the writer not to wake it up if the buffer is not as full as it expects to be. Note, after this fix, it appears that the waiter is now woken up around 2x the times it was before (~200). This is a tremendous improvement from the 11,000 times, but I will need to spend some time to see why polling is more aggressive in its wakeups than the read blocking code. Link: https://lore.kernel.org/linux-trace-kernel/20230929180113.01c2cae3@rorschach.local.home Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Fixes: 42fb0a1e84ff ("tracing/ring-buffer: Have polling block on watermark") Reported-by: Julia Lawall <julia.lawall@inria.fr> Tested-by: Julia Lawall <julia.lawall@inria.fr> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2023-09-30Merge tag 'dma-mapping-6.6-2023-09-30' of ↵Linus Torvalds
git://git.infradead.org/users/hch/dma-mapping Pull dma-mapping fixes from Christoph Hellwig: - fix the narea calculation in swiotlb initialization (Ross Lagerwall) - fix the check whether a device has used swiotlb (Petr Tesarik) * tag 'dma-mapping-6.6-2023-09-30' of git://git.infradead.org/users/hch/dma-mapping: swiotlb: fix the check whether a device has used software IO TLB swiotlb: use the calculated number of areas
2023-09-30Merge tag 'iomap-6.6-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds
Pull iomap fixes from Darrick Wong: - Handle a race between writing and shrinking block devices by returning EIO - Fix a typo in a comment * tag 'iomap-6.6-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: iomap: Spelling s/preceeding/preceding/g iomap: add a workaround for racy i_size updates on block devices
2023-09-30Merge tag 'i2c-for-6.6-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "Usual business: a driver fix, a DT fix, a minor core fix" * tag 'i2c-for-6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: npcm7xx: Fix callback completion ordering i2c: mux: Avoid potential false error message in i2c_mux_add_adapter dt-bindings: i2c: mxs: Pass ref and 'unevaluatedProperties: false'
2023-09-30Merge tag 'acpi-6.6-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fix from Rafael Wysocki: "Fix a possible NULL pointer dereference in the error path of acpi_video_bus_add() resulting from recent changes (Dinghao Liu)" * tag 'acpi-6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: video: Fix NULL pointer dereference in acpi_video_bus_add()
2023-09-30Merge tag 'powerpc-6.6-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Fix arch_stack_walk_reliable(), used by live patching - Fix powerpc selftests to work with run_kselftest.sh Thanks to Joe Lawrence and Petr Mladek. * tag 'powerpc-6.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: selftests/powerpc: Fix emit_tests to work with run_kselftest.sh powerpc/stacktrace: Fix arch_stack_walk_reliable()
2023-09-30Merge tag 'nfsd-6.6-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux Pull nfsd fix from Chuck Lever: - Fix NFSv4 READ corner case * tag 'nfsd-6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: NFSD: Fix zero NFSv4 READ results when RQ_SPLICE_OK is not set
2023-09-30Merge tag '6.6-rc3-smb3-client-fix' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds
Pull smb client fix from Steve French: "Fix for password freeing potential oops (also for stable)" * tag '6.6-rc3-smb3-client-fix' of git://git.samba.org/sfrench/cifs-2.6: fs/smb/client: Reset password pointer to NULL
2023-09-29Crash: add lock to serialize crash hotplug handlingBaoquan He
Eric reported that handling corresponding crash hotplug event can be failed easily when many memory hotplug event are notified in a short period. They failed because failing to take __kexec_lock. ======= [ 78.714569] Fallback order for Node 0: 0 [ 78.714575] Built 1 zonelists, mobility grouping on. Total pages: 1817886 [ 78.717133] Policy zone: Normal [ 78.724423] crash hp: kexec_trylock() failed, elfcorehdr may be inaccurate [ 78.727207] crash hp: kexec_trylock() failed, elfcorehdr may be inaccurate [ 80.056643] PEFILE: Unsigned PE binary ======= The memory hotplug events are notified very quickly and very many, while the handling of crash hotplug is much slower relatively. So the atomic variable __kexec_lock and kexec_trylock() can't guarantee the serialization of crash hotplug handling. Here, add a new mutex lock __crash_hotplug_lock to serialize crash hotplug handling specifically. This doesn't impact the usage of __kexec_lock. Link: https://lkml.kernel.org/r/20230926120905.392903-1-bhe@redhat.com Fixes: 247262756121 ("crash: add generic infrastructure for crash hotplug support") Signed-off-by: Baoquan He <bhe@redhat.com> Tested-by: Eric DeVolder <eric.devolder@oracle.com> Reviewed-by: Eric DeVolder <eric.devolder@oracle.com> Reviewed-by: Valentin Schneider <vschneid@redhat.com> Cc: Sourabh Jain <sourabhjain@linux.ibm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
generated by cgit (git 2.34.1) at 2025-09-26 13:46:45 +0000