| Age | Commit message (Collapse) | Author |
|---|
|
These I forgot about before, but need to get into 3.14-final.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Currently we're only sending arp requests if we have a route to the target
(and, thus, can find out the source ip address).
There are some use cases, however, where we don't want/need to set an ip
address (or set up a specific route) for bonding to use arp monitoring *for
traffic generation*. We can easily send arp probes (arp requests with src
ip == 0) to generate arp broadcast responses from the target ip and use
them for determining if the target is up.
This, obviously, won't work with arp validation - because we don't have the
ip address set and, thus, will filter out the responses. So in that case -
print a warning.
CC: François CACHEREUL <f.cachereul@alphalink.fr>
CC: Zhenjie Chen <zhchen@redhat.com>
CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"Misc fixes, most of them on the tooling side"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf tools: Fix strict alias issue for find_first_bit
perf tools: fix BFD detection on opensuse
perf: Fix hotplug splat
perf/x86: Fix event scheduling
perf symbols: Destroy unused symsrcs
perf annotate: Check availability of annotate when processing samples
|
|
git://people.freedesktop.org/~thomash/linux into drm-fixes
A couple of minor fixes.
Pull request of 2014-03-02
* tag 'vmwgfx-fixes-3.14-2014-03-02' of git://people.freedesktop.org/~thomash/linux:
drm/vmwgfx: avoid null pointer dereference at failure paths
drm/vmwgfx: Make sure backing mobs are cleared when allocated. Update driver date.
drm/vmwgfx: Remove some unused surface formats
|
|
vmw_takedown_otable_base() and vmw_mob_unbind() check for
potential vmw_fifo_reserve() failure and print error message,
but then immediately dereference NULL pointer.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
|
|
date.
Backing mob contents is propagated to user-space, so make sure backing
mobs are cleared when allocated. This also accidently fix rendering errors
with celestia when emulating legacy mode.
Also update driver date.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
|
|
These formats are deprecated.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Peter Anvin:
"The VMCOREINFO patch I'll pushing for this release to avoid having a
release with kASLR and but without that information.
I was hoping to include the FPU patches from Suresh, but ran into a
problem (see other thread); will try to make them happen next week"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, kaslr: add missed "static" declarations
x86, kaslr: export offset in VMCOREINFO ELF notes
|
|
Pull SCSI target fixes from Nicholas Bellinger:
"The bulk of the series are bugfixes for qla2xxx target NPIV support
that went in for v3.14-rc1. Also included are a few DIF related
fixes, a qla2xxx fix (Cc'ed to stable) from Greg W., and vhost/scsi
protocol version related fix from Venkatesh.
Also just a heads up that a series to address a number of issues with
iser-target active I/O reset/shutdown is still being tested, and will
be included in a separate -rc6 PULL request"
* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
vhost/scsi: Check LUN structure byte 0 is set to 1, per spec
qla2xxx: Fix kernel panic on selective retransmission request
Target/sbc: Don't use sg as iterator in sbc_verify_read
target: Add DIF sense codes in transport_generic_request_failure
target/sbc: Fix sbc_dif_copy_prot addr offset bug
tcm_qla2xxx: Fix NAA formatted name for NPIV WWPNs
tcm_qla2xxx: Perform configfs depend/undepend for base_tpg
tcm_qla2xxx: Add NPIV specific enable/disable attribute logic
qla2xxx: Check + fail when npiv_vports_inuse exists in shutdown
qla2xxx: Fix qlt_lport_register base_vha callback race
|
|
Pull slave-dma fixes from Vinod Koul:
"This request brings you two small fixes. First one for fixing
dereference of freed descriptor and second for fixing sdma bindings
for it to work for imx25.
I was planning to send this about 10days ago but then I had to proceed
on my paternity leave and didnt get chance to send this. Now got a
bit of time from dady duties :)"
* 'fixes' of git://git.infradead.org/users/vkoul/slave-dma:
dma: sdma: Add imx25 compatible
dma: ste_dma40: don't dereference free:d descriptor
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI and power management fixes from Rafael Wysocki:
"These three commits fix a recent intel_pstate regression and two old
bugs that should be fixed in -stable too, one in the ACPI processor
driver and one in the firmare loader.
Specifics:
- One of the recent intel_pstate driver fixes introduced a rounding
error that on some systems causes the frequency to be stuck at the
lowest level forever. Fix from Dirk Brandewie.
- The firmware_class driver's PM notifier doesn't handle the
PM_RESTORE_PREPARE event during hibernation image restore and that
leads to a deadlock on umhelper_sem in __usermodehelper_disable().
Fix from Sebastian Capella.
- acpi_processor_set_throttling() abuses set_cpus_allowed_ptr() in a
nasty way which triggers the WARN_ON_ONCE() in wq_worker_waking_up()
among other things. Fix from Lan Tianyu"
* tag 'pm+acpi-3.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / processor: Rework processor throttling with work_on_cpu()
PM / hibernate: Fix restore hang in freeze_processes()
intel_pstate: Change busy calculation to use fixed point math.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent build fixes for certain distro environments, from Arnaldo Carvalho de Melo:
* Problem on recent gcc on x86-32 related to strict alias issue for
find_first_bit (Jiri Olsa).
* OpenSuSE: BFD detection problems related to not explicitely listing all
required libraries (Andi Kleen)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus
Jonathan writes:
Fourth set of IIO fixes for the 3.14 kernel.
A single line patch fixing a regression that was introduced in 3.13 in the
reworking of the mxs touch screen and ADC drivers to be interrupt rather
than polling driven. It resulted in a stray double reporting of the release
coordinate in the touch screen driver. The bug lay in the adc side
of the driver which left the statemachine in the wrong state.
|
|
Add a maintainers entry for the Armada DRM driver.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The recent commit "fe1624c bna: RX Filter Enhancements" disables
VLAN tag stripping if the NIC is in promiscuous mode. This causes
__vlan_hwaccel_put_tag() is called when the stripping is disabled.
Because of this VLAN over bna does not work and causes BUGs in conjunction
with openvswitch like this:
Reviewed-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Redefine the RXD_ERR_MASK to include only relevant error bits. This fixes
a customer reported issue of randomly dropping packets on the 5719.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Alexander Aring says:
====================
6lowpan: reimplementation of fragmentation handling
this patch series reimplementation the fragmentation handling of 6lowpan
accroding to rfc4944 [1].
The first big note is, that the current fragmentation behaviour isn't rfc
complaint. The main issue is a wrong datagram_size value which needs to be:
datagram_size = ipv6_payload + ipv6 header + (maybe compressed transport header,
currently only udp is supported)
but the current datagram_size value is calculated as:
datagram_size = ipv6_payload
Fragmentation work in a linux<->linux communication only.
Why reimplementation?
I reimplemted the reassembly side only. The current behaviour is to allocate a
skb with the reassembled size and hold all fragments in a list, protected by a
spinlock. After we received all fragments (detected by the sum of all fragments,
it begins to place all fragments into the allocated skb).
This reassembly implementation has some race condition. Additional I make it more
rfc complaint. The current implementation match on the tag value inside the frag
header only, but rfc4944 says we need to match on dst addr(mac), src addr(mac),
tag value, datagram_size value. [2]
The new reassembly handling use the inet_frag api (I mean the callback interface
of ipv6 and ipv4 reassembly). I looked into ipv6 and wanted to see how ipv6 is
dealing with reassembly, so I based my code on this implementation.
On the sending side to generate the fragments I improved the current code to use
the nearest 8 divided payload. (We can do that, because the mac layer has a
dynamic size, so it depends on mac_header how big we can do the payload).
Of course I fix also the reassembly/sending side to be rfc complaint now.
Regards
Alexander Aring
[1] http://tools.ietf.org/html/rfc4944
[2] http://tools.ietf.org/html/rfc4944#section-5.3
changes since v2:
- rework checkpatch code style issue patch.
Merge two pr_debugs into one pr_debug.
changes since v3:
- rename 6lowpan.ko to 6lowpan_rtnl.c in commit msg of patch 5/8.
changes since v4:
- Add a new patch 2/8 to introduce lowpan_uncompress_size function. Also
improving this function a little bit.
- Add a new patch 4/8 to change tag value to __be16.
- use skb_header_reset function on FRAG1 only, which should have the
lowpan header. See lowpan_get_frag_info function. (slightly improving
of fragmentation header parsing).
- changes types of variables to u16 in lowpan_skb_fragmentation.
- use lowpan_uncompress_size instead of storing necessary information
in skb control block, this can be destroyed after dev_queue_xmit call.
Thanks David for this hint.
- remove Tested-by: Martin Townsend <martin.townsend@xsilon.com>, because
too many funcionality change.
changes since v5:
- handle lowpan_addr_mode_size with lookup table.
changes since v6:
- remove unnecessary parameter in lowpan_frag_queue.
- fix commit message in patch 8/8 which included a describtion of adding the
lownpan_uncompress_size function. This was splitted in a seperate patch.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch drops the current way of 6lowpan fragmentation on receiving
side and replace it with a implementation which use the inet_frag api.
The old fragmentation handling has some race conditions and isn't
rfc4944 compatible. Also adding support to match fragments on
destination address, source address, tag value and datagram_size
which is missing in the current implementation.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds necessary ieee802154 6lowpan namespace to provide the
inet_frag information. This is a initial support for handling 6lowpan
fragmentation with the inet_frag api.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Detected with:
./scripts/checkpatch.pl --strict -f net/ieee802154/6lowpan_rtnl.c
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We have a 6lowpan.c file and 6lowpan.ko file. To avoid confusing we
should move 6lowpan.c to 6lowpan_rtnl.c. Then we can support multiple
source files for 6lowpan module.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch fix the fragmentation on sending side according to rfc4944.
Also add improvement to use the full payload of a PDU which calculate
the nearest divided to 8 payload length for the fragmentation datagram
size attribute.
The main issue is that the datagram size of fragmentation header use the
ipv6 payload length, but rfc4944 says it's the ipv6 payload length inclusive
network header size (and transport header size if compressed).
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch add a lookup function for uncompressed 6LoWPAN header
size. This is needed to estimate the real size after uncompress the
6LoWPAN header.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds a 6lowpan fragmentation struct into cb of skb which
is necessary to hold fragmentation information.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use devm_ioremap_resource() in order to make the code simpler.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use devm_ioremap_resource() in order to make the code simpler.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 57f89bfa2140 ("network: Allow af_packet to transmit +4 bytes
for VLAN packets.") added the possibility for non-mmaped frames to
send extra 4 byte for VLAN header so the MTU increases from 1500 to
1504 byte, for example.
Commit cbd89acb9eb2 ("af_packet: fix for sending VLAN frames via
packet_mmap") attempted to fix that for the mmap part but was
reverted as it caused regressions while using eth_type_trans()
on output path.
Lets just act analogous to 57f89bfa2140 and add a similar logic
to TX_RING. We presume size_max as overcharged with +4 bytes and
later on after skb has been built by tpacket_fill_skb() check
for ETH_P_8021Q header on packets larger than normal MTU. Can
be easily reproduced with a slightly modified trafgen in mmap(2)
mode, test cases:
{ fill(0xff, 12) const16(0x8100) fill(0xff, <1504|1505>) }
{ fill(0xff, 12) const16(0x0806) fill(0xff, <1500|1501>) }
Note that we need to do the test right after tpacket_fill_skb()
as sockets can have PACKET_LOSS set where we would not fail but
instead just continue to traverse the ring.
Reported-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Cc: Ben Greear <greearb@candelatech.com>
Cc: Phil Sutter <phil@nwl.cc>
Tested-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
"A few dm-cache fixes, an invalid ioctl handling fix for dm multipath,
a couple immutable biovec fixups for dm mirror, and a few dm-thin
fixes.
There will likely be additional dm-thin metadata and data resize fixes
to include in 3.14-rc6 next week.
Note to stable-minded folks: Immutable biovecs were introduced in
3.14, so the related fixups for dm mirror are not needed in stable@
kernels"
* tag 'dm-3.14-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm cache: fix truncation bug when mapping I/O to >2TB fast device
dm thin: allow metadata space larger than supported to go unused
dm mpath: fix stalls when handling invalid ioctls
dm thin: fix the error path for the thin device constructor
dm raid1: fix immutable biovec related BUG when retrying read bio
dm io: fix I/O to multiple destinations
dm thin: avoid metadata commit if a pool's thin devices haven't changed
dm cache: do not add migration to completed list before unhooking bio
dm cache: move hook_info into common portion of per_bio_data structure
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"It's a bad habit to get a higher volume of fixes often lately, but
things happen again.
All commits found here are real bug fixes, and are mostly trivial.
Most of changes in ASoC are the fixes for enum items due to the wrong
API usages, in addition to a few DAPM mutex deadlock and other fixes.
In HD-audio, only fixups for HP laptops. Although diffstat shows
much, the changes are simple: there are just so many different device
entries there"
* tag 'sound-3.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ASoC: sta32x: Fix wrong enum for limiter2 release rate
ASoC: da732x: Mark DC offset control registers volatile
ALSA: hda/realtek - Add more entry for enable HP mute led
ALSA: hda - Add a fixup for HP Folio 13 mute LED
ASoC: wm8958-dsp: Fix firmware block loading
ASoC: sta32x: Fix cache sync
ALSA: hda/realtek - Add more entry for enable HP mute led
ASoC: dapm: Add locking to snd_soc_dapm_xxxx_pin functions
Input - arizona-haptics: Fix double lock of dapm_mutex
ASoC: wm8400: Fix the wrong number of enum items
ASoC: isabelle: Fix the wrong number of items in enum ctls
ASoC: ad1980: Fix wrong number of items for capture source
ASoC: wm8994: Fix the wrong number of enum items
ASoC: wm8900: Fix the wrong number of enum items
ASoC: wm8770: Fix wrong number of enum items
ASoC: sta32x: Fix array access overflow
ASoC: dapm: Correct regulator bypass error messages
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp
Pull EDAC fixes from Borislav Petkov:
"Two fixes below for PCI devices disappearing when a reference count
underflow happens after a couple of insmod/rmmod cycles in succession"
* tag 'edac_fixes_for_3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
i7300_edac: Fix device reference count
i7core_edac: Fix PCI device reference count
|
|
Pull KVM fixes from Paolo Bonzini:
"Three x86 fixes and one for ARM/ARM64.
In particular, nested virtualization on Intel is broken in 3.13 and
fixed by this pull request"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
kvm, vmx: Really fix lazy FPU on nested guest
kvm: x86: fix emulator buffer overflow (CVE-2014-0049)
arm/arm64: KVM: detect CPU reset on CPU_PM_EXIT
KVM: MMU: drop read-only large sptes when creating lower level sptes
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull ARM64 fixes from Catalin Marinas:
- !CONFIG_SMP build fix
- pte bit testing macros conversion fix (int truncates top bits of
long)
- stack unwinding PC calculation fix
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Fix !CONFIG_SMP kernel build
arm64: mm: Add double logical invert to pte accessors
ARM64: unwind: Fix PC calculation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
Pull powerpc fixes from Ben Herrenschmidt:
"Here are a few more powerpc fixes for 3.14.
Most of these are also CC'ed to stable and fix bugs in new
functionality introduced in the last 2 or 3 versions"
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
powerpc/powernv: Fix indirect XSCOM unmangling
powerpc/powernv: Fix opal_xscom_{read,write} prototype
powerpc/powernv: Refactor PHB diag-data dump
powerpc/powernv: Dump PHB diag-data immediately
powerpc: Increase stack redzone for 64-bit userspace to 512 bytes
powerpc/ftrace: bugfix for test_24bit_addr
powerpc/crashdump : Fix page frame number check in copy_oldmem_page
powerpc/le: Ensure that the 'stop-self' RTAS token is handled correctly
|
|
As many Surface Pro I & II users have found out, the mwifiex_usb
doesn't support usb autosuspend, and it has caused some system
stability issues.
Bug 69661 - mwifiex_usb on MS Surface Pro 1 is unstable
Bug 60815 - Interface hangs in mwifiex_usb
Bug 64111 - mwifiex_usb USB8797 crash failed to get signal
information
USB autosuspend get triggered when Surface Pro's AC power is
removed or powertop enables power saving on USB8797 device.
Driver's suspend handler is called here, but resume handler
won't be called until the AC power is put back on or powertop
disables power saving for USB8797.
We need to refactor the suspend/resume handlers to support
usb autosuspend properly. For now let's just remove it.
Cc: <stable@vger.kernel.org> # 3.5+
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes
|
|
Aaron Brown says:
====================
This series contains updates to ixgbe and ixgbevf.
Don provides an update to change a hard coded timeout interval to
a system-wide timeout one, collects AUTOC register functions into
one place and fixes some firmware bit handling.
Emil resolves a tx handling error introduced in a recent commit and
adds check for CHECKSUM_PARTIAL to avoid an skb_is_gso check
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds check for CHECKSUM_PARTIAL to avoid the skb_is_gso check
in ixgbevf_tso(). It should reduce overhead for workloads that are not using
TSO or checksum offloads. It is the same as in ixgbe.
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch resolves an issue introduced by:
commit 7ad1a093519e37fb673579819bf6af122641c397
ixgbevf: make the first tx_buffer a repository for most of the skb info
Incorrect check for the result of ixgbevf_tso() can lead to calling
ixgbevf_tx_csum() which can spawn 2 context descriptors and result in
performance degradation and/or corrupted packets.
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The driver will now honor the MNG FW veto bit in blocking link resets.
This patch will affect x520 and x540 systems.
Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The current code doesn't toggle the correct bit to reset the data pipeline
on Restart_AN assertion. This patch corrects that.
Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When reading or writing to the AUTOC register on 82599 devices we need to
preform various operations that aren't needed for other MAC types. This
patch will collect all of that code into one place to minimize MAC checks
in common code paths.
While doing this I also clean up some cases where we weren't holding the
SW/FW semaphore during a read/modify/write of AUTOC.
Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently we were just always polling for a hard coded 80 ms and not
respecting the system-wide timeout interval. Since up until now all
devices have been tested with this 80ms value we continue to use this
value as a hard minimum.
Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit fb4a96029c8a (arm64: kernel: fix per-cpu offset restore on
resume) uses per_cpu_offset() unconditionally during CPU wakeup,
however, this is only defined for the SMP case.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: Dave P Martin <Dave.Martin@arm.com>
|
|
Page table entries on ARM64 are 64 bits, and some pte functions such as
pte_dirty return a bitwise-and of a flag with the pte value. If the
flag to be tested resides in the upper 32 bits of the pte, then we run
into the danger of the result being dropped if downcast.
For example:
gather_stats(page, md, pte_dirty(*pte), 1);
where pte_dirty(*pte) is downcast to an int.
This patch adds a double logical invert to all the pte_ accessors to
ensure predictable downcasting.
Signed-off-by: Steve Capper <steve.capper@linaro.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
When remapping a block to the cache's fast device that is larger than
2TB we must not truncate the destination sector to 32bits. The 32bit
temporary result of from_cblock() was being overflowed in
remap_to_cache() due to the logical left shift.
Use an intermediate 64bit type to store the 32bit from_cblock() result
to fix the overflow.
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org
|
|
When compiling perf tool code with gcc 4.4.7 I'm getting
following error:
CC util/session.o
cc1: warnings being treated as errors
util/session.c: In function ‘perf_session_deliver_event’:
tools/perf/util/include/linux/bitops.h:109: error: dereferencing pointer ‘p’ does break strict-aliasing rules
tools/perf/util/include/linux/bitops.h:101: error: dereferencing pointer ‘p’ does break strict-aliasing rules
util/session.c:697: note: initialized from here
tools/perf/util/include/linux/bitops.h:101: note: initialized from here
make[1]: *** [util/session.o] Error 1
make: *** [util/session.o] Error 2
The aliased types here are u64 and unsigned long pointers, which is safe
for the find_first_bit processing.
This error shows up for me only for gcc 4.4 on 32bit x86, even for
-Wstrict-aliasing=3, while newer gcc are quiet and scream here for
-Wstrict-aliasing={2,1}. Looks like newer gcc changed the rules for
strict alias warnings.
The gcc documentation offers workaround for valid aliasing by using
__may_alias__ attribute:
http://gcc.gnu.org/onlinedocs/gcc-4.4.0/gcc/Type-Attributes.html
Using this workaround for the find_first_bit function.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1393434867-20271-1-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
We need to unmangle the full address, not just the register
number, and we also need to support the real indirect bit
being set for in-kernel uses.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
CC: <stable@vger.kernel.org> [v3.13]
|
|
The OPAL firmware functions opal_xscom_read and opal_xscom_write
take a 64-bit argument for the XSCOM (PCB) address in order to
support the indirect mode on P8.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
CC: <stable@vger.kernel.org> [v3.13]
|
