summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-05-10net: mscc: ocelot: fix stat counter register valuesColin Foster
Commit d4c367650704 ("net: mscc: ocelot: keep ocelot_stat_layout by reg address, not offset") organized the stats counters for Ocelot chips, namely the VSC7512 and VSC7514. A few of the counter offsets were incorrect, and were caught by this warning: WARNING: CPU: 0 PID: 24 at drivers/net/ethernet/mscc/ocelot_stats.c:909 ocelot_stats_init+0x1fc/0x2d8 reg 0x5000078 had address 0x220 but reg 0x5000079 has address 0x214, bulking broken! Fix these register offsets. Fixes: d4c367650704 ("net: mscc: ocelot: keep ocelot_stat_layout by reg address, not offset") Signed-off-by: Colin Foster <colin.foster@in-advantage.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-10ipvlan:Fix out-of-bounds caused by unclear skb->cbt.feng
If skb enqueue the qdisc, fq_skb_cb(skb)->time_to_send is changed which is actually skb->cb, and IPCB(skb_in)->opt will be used in __ip_options_echo. It is possible that memcpy is out of bounds and lead to stack overflow. We should clear skb->cb before ip_local_out or ip6_local_out. v2: 1. clean the stack info 2. use IPCB/IP6CB instead of skb->cb crash on stable-5.10(reproduce in kasan kernel). Stack info: [ 2203.651571] BUG: KASAN: stack-out-of-bounds in __ip_options_echo+0x589/0x800 [ 2203.653327] Write of size 4 at addr ffff88811a388f27 by task swapper/3/0 [ 2203.655460] CPU: 3 PID: 0 Comm: swapper/3 Kdump: loaded Not tainted 5.10.0-60.18.0.50.h856.kasan.eulerosv2r11.x86_64 #1 [ 2203.655466] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.10.2-0-g5f4c7b1-20181220_000000-szxrtosci10000 04/01/2014 [ 2203.655475] Call Trace: [ 2203.655481] <IRQ> [ 2203.655501] dump_stack+0x9c/0xd3 [ 2203.655514] print_address_description.constprop.0+0x19/0x170 [ 2203.655530] __kasan_report.cold+0x6c/0x84 [ 2203.655586] kasan_report+0x3a/0x50 [ 2203.655594] check_memory_region+0xfd/0x1f0 [ 2203.655601] memcpy+0x39/0x60 [ 2203.655608] __ip_options_echo+0x589/0x800 [ 2203.655654] __icmp_send+0x59a/0x960 [ 2203.655755] nf_send_unreach+0x129/0x3d0 [nf_reject_ipv4] [ 2203.655763] reject_tg+0x77/0x1bf [ipt_REJECT] [ 2203.655772] ipt_do_table+0x691/0xa40 [ip_tables] [ 2203.655821] nf_hook_slow+0x69/0x100 [ 2203.655828] __ip_local_out+0x21e/0x2b0 [ 2203.655857] ip_local_out+0x28/0x90 [ 2203.655868] ipvlan_process_v4_outbound+0x21e/0x260 [ipvlan] [ 2203.655931] ipvlan_xmit_mode_l3+0x3bd/0x400 [ipvlan] [ 2203.655967] ipvlan_queue_xmit+0xb3/0x190 [ipvlan] [ 2203.655977] ipvlan_start_xmit+0x2e/0xb0 [ipvlan] [ 2203.655984] xmit_one.constprop.0+0xe1/0x280 [ 2203.655992] dev_hard_start_xmit+0x62/0x100 [ 2203.656000] sch_direct_xmit+0x215/0x640 [ 2203.656028] __qdisc_run+0x153/0x1f0 [ 2203.656069] __dev_queue_xmit+0x77f/0x1030 [ 2203.656173] ip_finish_output2+0x59b/0xc20 [ 2203.656244] __ip_finish_output.part.0+0x318/0x3d0 [ 2203.656312] ip_finish_output+0x168/0x190 [ 2203.656320] ip_output+0x12d/0x220 [ 2203.656357] __ip_queue_xmit+0x392/0x880 [ 2203.656380] __tcp_transmit_skb+0x1088/0x11c0 [ 2203.656436] __tcp_retransmit_skb+0x475/0xa30 [ 2203.656505] tcp_retransmit_skb+0x2d/0x190 [ 2203.656512] tcp_retransmit_timer+0x3af/0x9a0 [ 2203.656519] tcp_write_timer_handler+0x3ba/0x510 [ 2203.656529] tcp_write_timer+0x55/0x180 [ 2203.656542] call_timer_fn+0x3f/0x1d0 [ 2203.656555] expire_timers+0x160/0x200 [ 2203.656562] run_timer_softirq+0x1f4/0x480 [ 2203.656606] __do_softirq+0xfd/0x402 [ 2203.656613] asm_call_irq_on_stack+0x12/0x20 [ 2203.656617] </IRQ> [ 2203.656623] do_softirq_own_stack+0x37/0x50 [ 2203.656631] irq_exit_rcu+0x134/0x1a0 [ 2203.656639] sysvec_apic_timer_interrupt+0x36/0x80 [ 2203.656646] asm_sysvec_apic_timer_interrupt+0x12/0x20 [ 2203.656654] RIP: 0010:default_idle+0x13/0x20 [ 2203.656663] Code: 89 f0 5d 41 5c 41 5d 41 5e c3 cc cc cc cc cc cc cc cc cc cc cc cc cc 0f 1f 44 00 00 0f 1f 44 00 00 0f 00 2d 9f 32 57 00 fb f4 <c3> cc cc cc cc 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 41 54 be 08 [ 2203.656668] RSP: 0018:ffff88810036fe78 EFLAGS: 00000256 [ 2203.656676] RAX: ffffffffaf2a87f0 RBX: ffff888100360000 RCX: ffffffffaf290191 [ 2203.656681] RDX: 0000000000098b5e RSI: 0000000000000004 RDI: ffff88811a3c4f60 [ 2203.656686] RBP: 0000000000000000 R08: 0000000000000001 R09: ffff88811a3c4f63 [ 2203.656690] R10: ffffed10234789ec R11: 0000000000000001 R12: 0000000000000003 [ 2203.656695] R13: ffff888100360000 R14: 0000000000000000 R15: 0000000000000000 [ 2203.656729] default_idle_call+0x5a/0x150 [ 2203.656735] cpuidle_idle_call+0x1c6/0x220 [ 2203.656780] do_idle+0xab/0x100 [ 2203.656786] cpu_startup_entry+0x19/0x20 [ 2203.656793] secondary_startup_64_no_verify+0xc2/0xcb [ 2203.657409] The buggy address belongs to the page: [ 2203.658648] page:0000000027a9842f refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x11a388 [ 2203.658665] flags: 0x17ffffc0001000(reserved|node=0|zone=2|lastcpupid=0x1fffff) [ 2203.658675] raw: 0017ffffc0001000 ffffea000468e208 ffffea000468e208 0000000000000000 [ 2203.658682] raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000 [ 2203.658686] page dumped because: kasan: bad access detected To reproduce(ipvlan with IPVLAN_MODE_L3): Env setting: ======================================================= modprobe ipvlan ipvlan_default_mode=1 sysctl net.ipv4.conf.eth0.forwarding=1 iptables -t nat -A POSTROUTING -s 20.0.0.0/255.255.255.0 -o eth0 -j MASQUERADE ip link add gw link eth0 type ipvlan ip -4 addr add 20.0.0.254/24 dev gw ip netns add net1 ip link add ipv1 link eth0 type ipvlan ip link set ipv1 netns net1 ip netns exec net1 ip link set ipv1 up ip netns exec net1 ip -4 addr add 20.0.0.4/24 dev ipv1 ip netns exec net1 route add default gw 20.0.0.254 ip netns exec net1 tc qdisc add dev ipv1 root netem loss 10% ifconfig gw up iptables -t filter -A OUTPUT -p tcp --dport 8888 -j REJECT --reject-with icmp-port-unreachable ======================================================= And then excute the shell(curl any address of eth0 can reach): for((i=1;i<=100000;i++)) do ip netns exec net1 curl x.x.x.x:8888 done ======================================================= Fixes: 2ad7bf363841 ("ipvlan: Initial check-in of the IPVLAN driver.") Signed-off-by: "t.feng" <fengtao40@huawei.com> Suggested-by: Florian Westphal <fw@strlen.de> Reviewed-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-10docs: networking: fix x25-iface.rst heading & index orderRandy Dunlap
Fix the chapter heading for "X.25 Device Driver Interface" so that it does not contain a trailing '-' character, which makes Sphinx omit this heading from the contents. Reverse the order of the x25.rst and x25-iface.rst files in the index so that the project introduction (x25.rst) comes first. Fixes: 883780af7209 ("docs: networking: convert x25-iface.txt to ReST") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: linux-doc@vger.kernel.org Cc: Martin Schiller <ms@dev.tdt.de> Cc: linux-x25@vger.kernel.org Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-10gve: Remove the code of clearing PBA bitZiwei Xiao
Clearing the PBA bit from the driver is race prone and it may lead to dropped interrupt events. This could potentially lead to the traffic being completely halted. Fixes: 5e8c5adf95f8 ("gve: DQO: Add core netdev features") Signed-off-by: Ziwei Xiao <ziweixiao@google.com> Signed-off-by: Bailey Forrest <bcf@google.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-10tcp: add annotations around sk->sk_shutdown accessesEric Dumazet
Now sk->sk_shutdown is no longer a bitfield, we can add standard READ_ONCE()/WRITE_ONCE() annotations to silence KCSAN reports like the following: BUG: KCSAN: data-race in tcp_disconnect / tcp_poll write to 0xffff88814588582c of 1 bytes by task 3404 on cpu 1: tcp_disconnect+0x4d6/0xdb0 net/ipv4/tcp.c:3121 __inet_stream_connect+0x5dd/0x6e0 net/ipv4/af_inet.c:715 inet_stream_connect+0x48/0x70 net/ipv4/af_inet.c:727 __sys_connect_file net/socket.c:2001 [inline] __sys_connect+0x19b/0x1b0 net/socket.c:2018 __do_sys_connect net/socket.c:2028 [inline] __se_sys_connect net/socket.c:2025 [inline] __x64_sys_connect+0x41/0x50 net/socket.c:2025 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd read to 0xffff88814588582c of 1 bytes by task 3374 on cpu 0: tcp_poll+0x2e6/0x7d0 net/ipv4/tcp.c:562 sock_poll+0x253/0x270 net/socket.c:1383 vfs_poll include/linux/poll.h:88 [inline] io_poll_check_events io_uring/poll.c:281 [inline] io_poll_task_func+0x15a/0x820 io_uring/poll.c:333 handle_tw_list io_uring/io_uring.c:1184 [inline] tctx_task_work+0x1fe/0x4d0 io_uring/io_uring.c:1246 task_work_run+0x123/0x160 kernel/task_work.c:179 get_signal+0xe64/0xff0 kernel/signal.c:2635 arch_do_signal_or_restart+0x89/0x2a0 arch/x86/kernel/signal.c:306 exit_to_user_mode_loop+0x6f/0xe0 kernel/entry/common.c:168 exit_to_user_mode_prepare+0x6c/0xb0 kernel/entry/common.c:204 __syscall_exit_to_user_mode_work kernel/entry/common.c:286 [inline] syscall_exit_to_user_mode+0x26/0x140 kernel/entry/common.c:297 do_syscall_64+0x4d/0xc0 arch/x86/entry/common.c:86 entry_SYSCALL_64_after_hwframe+0x63/0xcd value changed: 0x03 -> 0x00 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-10net: add vlan_get_protocol_and_depth() helperEric Dumazet
Before blamed commit, pskb_may_pull() was used instead of skb_header_pointer() in __vlan_get_protocol() and friends. Few callers depended on skb->head being populated with MAC header, syzbot caught one of them (skb_mac_gso_segment()) Add vlan_get_protocol_and_depth() to make the intent clearer and use it where sensible. This is a more generic fix than commit e9d3f80935b6 ("net/af_packet: make sure to pull mac header") which was dealing with a similar issue. kernel BUG at include/linux/skbuff.h:2655 ! invalid opcode: 0000 [#1] SMP KASAN CPU: 0 PID: 1441 Comm: syz-executor199 Not tainted 6.1.24-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/14/2023 RIP: 0010:__skb_pull include/linux/skbuff.h:2655 [inline] RIP: 0010:skb_mac_gso_segment+0x68f/0x6a0 net/core/gro.c:136 Code: fd 48 8b 5c 24 10 44 89 6b 70 48 c7 c7 c0 ae 0d 86 44 89 e6 e8 a1 91 d0 00 48 c7 c7 00 af 0d 86 48 89 de 31 d2 e8 d1 4a e9 ff <0f> 0b 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 55 48 89 e5 41 RSP: 0018:ffffc90001bd7520 EFLAGS: 00010286 RAX: ffffffff8469736a RBX: ffff88810f31dac0 RCX: ffff888115a18b00 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffc90001bd75e8 R08: ffffffff84697183 R09: fffff5200037adf9 R10: 0000000000000000 R11: dffffc0000000001 R12: 0000000000000012 R13: 000000000000fee5 R14: 0000000000005865 R15: 000000000000fed7 FS: 000055555633f300(0000) GS:ffff8881f6a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000000 CR3: 0000000116fea000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> [<ffffffff847018dd>] __skb_gso_segment+0x32d/0x4c0 net/core/dev.c:3419 [<ffffffff8470398a>] skb_gso_segment include/linux/netdevice.h:4819 [inline] [<ffffffff8470398a>] validate_xmit_skb+0x3aa/0xee0 net/core/dev.c:3725 [<ffffffff84707042>] __dev_queue_xmit+0x1332/0x3300 net/core/dev.c:4313 [<ffffffff851a9ec7>] dev_queue_xmit+0x17/0x20 include/linux/netdevice.h:3029 [<ffffffff851b4a82>] packet_snd net/packet/af_packet.c:3111 [inline] [<ffffffff851b4a82>] packet_sendmsg+0x49d2/0x6470 net/packet/af_packet.c:3142 [<ffffffff84669a12>] sock_sendmsg_nosec net/socket.c:716 [inline] [<ffffffff84669a12>] sock_sendmsg net/socket.c:736 [inline] [<ffffffff84669a12>] __sys_sendto+0x472/0x5f0 net/socket.c:2139 [<ffffffff84669c75>] __do_sys_sendto net/socket.c:2151 [inline] [<ffffffff84669c75>] __se_sys_sendto net/socket.c:2147 [inline] [<ffffffff84669c75>] __x64_sys_sendto+0xe5/0x100 net/socket.c:2147 [<ffffffff8551d40f>] do_syscall_x64 arch/x86/entry/common.c:50 [inline] [<ffffffff8551d40f>] do_syscall_64+0x2f/0x50 arch/x86/entry/common.c:80 [<ffffffff85600087>] entry_SYSCALL_64_after_hwframe+0x63/0xcd Fixes: 469aceddfa3e ("vlan: consolidate VLAN parsing code and limit max parsing depth") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Toke Høiland-Jørgensen <toke@redhat.com> Cc: Willem de Bruijn <willemb@google.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-10net: pcs: xpcs: fix incorrect number of interfacesRussell King (Oracle)
In synopsys_xpcs_compat[], the DW_XPCS_2500BASEX entry was setting the number of interfaces using the xpcs_2500basex_features array rather than xpcs_2500basex_interfaces. This causes us to overflow the array of interfaces. Fix this. Fixes: f27abde3042a ("net: pcs: add 2500BASEX support for Intel mGbE controller") Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-10net: deal with most data-races in sk_wait_event()Eric Dumazet
__condition is evaluated twice in sk_wait_event() macro. First invocation is lockless, and reads can race with writes, as spotted by syzbot. BUG: KCSAN: data-race in sk_stream_wait_connect / tcp_disconnect write to 0xffff88812d83d6a0 of 4 bytes by task 9065 on cpu 1: tcp_disconnect+0x2cd/0xdb0 inet_shutdown+0x19e/0x1f0 net/ipv4/af_inet.c:911 __sys_shutdown_sock net/socket.c:2343 [inline] __sys_shutdown net/socket.c:2355 [inline] __do_sys_shutdown net/socket.c:2363 [inline] __se_sys_shutdown+0xf8/0x140 net/socket.c:2361 __x64_sys_shutdown+0x31/0x40 net/socket.c:2361 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd read to 0xffff88812d83d6a0 of 4 bytes by task 9040 on cpu 0: sk_stream_wait_connect+0x1de/0x3a0 net/core/stream.c:75 tcp_sendmsg_locked+0x2e4/0x2120 net/ipv4/tcp.c:1266 tcp_sendmsg+0x30/0x50 net/ipv4/tcp.c:1484 inet6_sendmsg+0x63/0x80 net/ipv6/af_inet6.c:651 sock_sendmsg_nosec net/socket.c:724 [inline] sock_sendmsg net/socket.c:747 [inline] __sys_sendto+0x246/0x300 net/socket.c:2142 __do_sys_sendto net/socket.c:2154 [inline] __se_sys_sendto net/socket.c:2150 [inline] __x64_sys_sendto+0x78/0x90 net/socket.c:2150 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd value changed: 0x00000000 -> 0x00000068 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-10net: annotate sk->sk_err write from do_recvmmsg()Eric Dumazet
do_recvmmsg() can write to sk->sk_err from multiple threads. As said before, many other points reading or writing sk_err need annotations. Fixes: 34b88a68f26a ("net: Fix use after free in the recvmmsg exit path") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-10netlink: annotate accesses to nlk->cb_runningEric Dumazet
Both netlink_recvmsg() and netlink_native_seq_show() read nlk->cb_running locklessly. Use READ_ONCE() there. Add corresponding WRITE_ONCE() to netlink_dump() and __netlink_dump_start() syzbot reported: BUG: KCSAN: data-race in __netlink_dump_start / netlink_recvmsg write to 0xffff88813ea4db59 of 1 bytes by task 28219 on cpu 0: __netlink_dump_start+0x3af/0x4d0 net/netlink/af_netlink.c:2399 netlink_dump_start include/linux/netlink.h:308 [inline] rtnetlink_rcv_msg+0x70f/0x8c0 net/core/rtnetlink.c:6130 netlink_rcv_skb+0x126/0x220 net/netlink/af_netlink.c:2577 rtnetlink_rcv+0x1c/0x20 net/core/rtnetlink.c:6192 netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline] netlink_unicast+0x56f/0x640 net/netlink/af_netlink.c:1365 netlink_sendmsg+0x665/0x770 net/netlink/af_netlink.c:1942 sock_sendmsg_nosec net/socket.c:724 [inline] sock_sendmsg net/socket.c:747 [inline] sock_write_iter+0x1aa/0x230 net/socket.c:1138 call_write_iter include/linux/fs.h:1851 [inline] new_sync_write fs/read_write.c:491 [inline] vfs_write+0x463/0x760 fs/read_write.c:584 ksys_write+0xeb/0x1a0 fs/read_write.c:637 __do_sys_write fs/read_write.c:649 [inline] __se_sys_write fs/read_write.c:646 [inline] __x64_sys_write+0x42/0x50 fs/read_write.c:646 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd read to 0xffff88813ea4db59 of 1 bytes by task 28222 on cpu 1: netlink_recvmsg+0x3b4/0x730 net/netlink/af_netlink.c:2022 sock_recvmsg_nosec+0x4c/0x80 net/socket.c:1017 ____sys_recvmsg+0x2db/0x310 net/socket.c:2718 ___sys_recvmsg net/socket.c:2762 [inline] do_recvmmsg+0x2e5/0x710 net/socket.c:2856 __sys_recvmmsg net/socket.c:2935 [inline] __do_sys_recvmmsg net/socket.c:2958 [inline] __se_sys_recvmmsg net/socket.c:2951 [inline] __x64_sys_recvmmsg+0xe2/0x160 net/socket.c:2951 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd value changed: 0x00 -> 0x01 Fixes: 16b304f3404f ("netlink: Eliminate kmalloc in netlink dump operation.") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-10Merge branch 'bonding-overflow'David S. Miller
Hangbin Liu says: ==================== bonding: fix send_peer_notif overflow Bonding send_peer_notif was defined as u8. But the value is num_peer_notif multiplied by peer_notif_delay, which is u8 * u32. This would cause the send_peer_notif overflow. Before the fix: TEST: num_grat_arp (active-backup miimon num_grat_arp 10) [ OK ] TEST: num_grat_arp (active-backup miimon num_grat_arp 20) [ OK ] 4 garp packets sent on active slave eth1 TEST: num_grat_arp (active-backup miimon num_grat_arp 30) [FAIL] 24 garp packets sent on active slave eth1 TEST: num_grat_arp (active-backup miimon num_grat_arp 50) [FAIL] After the fix: TEST: num_grat_arp (active-backup miimon num_grat_arp 10) [ OK ] TEST: num_grat_arp (active-backup miimon num_grat_arp 20) [ OK ] TEST: num_grat_arp (active-backup miimon num_grat_arp 30) [ OK ] TEST: num_grat_arp (active-backup miimon num_grat_arp 50) [ OK ] ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-10kselftest: bonding: add num_grat_arp testHangbin Liu
TEST: num_grat_arp (active-backup miimon num_grat_arp 10) [ OK ] TEST: num_grat_arp (active-backup miimon num_grat_arp 20) [ OK ] TEST: num_grat_arp (active-backup miimon num_grat_arp 30) [ OK ] TEST: num_grat_arp (active-backup miimon num_grat_arp 50) [ OK ] Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-10selftests: forwarding: lib: add netns support for tc rule handle stats getHangbin Liu
When run the test in netns, it's not easy to get the tc stats via tc_rule_handle_stats_get(). With the new netns parameter, we can get stats from specific netns like num=$(tc_rule_handle_stats_get "dev eth0 ingress" 101 ".packets" "-n ns") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-10Documentation: bonding: fix the doc of peer_notif_delayHangbin Liu
Bonding only supports setting peer_notif_delay with miimon set. Fixes: 0307d589c4d6 ("bonding: add documentation for peer_notif_delay") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-10bonding: fix send_peer_notif overflowHangbin Liu
Bonding send_peer_notif was defined as u8. Since commit 07a4ddec3ce9 ("bonding: add an option to specify a delay between peer notifications"). the bond->send_peer_notif will be num_peer_notif multiplied by peer_notif_delay, which is u8 * u32. This would cause the send_peer_notif overflow easily. e.g. ip link add bond0 type bond mode 1 miimon 100 num_grat_arp 30 peer_notify_delay 1000 To fix the overflow, let's set the send_peer_notif to u32 and limit peer_notif_delay to 300s. Reported-by: Liang Li <liali@redhat.com> Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2090053 Fixes: 07a4ddec3ce9 ("bonding: add an option to specify a delay between peer notifications") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-10net: ethernet: mtk_eth_soc: fix NULL pointer dereferenceDaniel Golle
Check for NULL pointer to avoid kernel crashing in case of missing WO firmware in case only a single WEDv2 device has been initialized, e.g. on MT7981 which can connect just one wireless frontend. Fixes: 86ce0d09e424 ("net: ethernet: mtk_eth_soc: use WO firmware for MT7981") Signed-off-by: Daniel Golle <daniel@makrotopia.org> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-10selftests: nft_flowtable.sh: check ingress/egress chain tooFlorian Westphal
Make sure flowtable interacts correctly with ingress and egress chains, i.e. those get handled before and after flow table respectively. Adds three more tests: 1. repeat flowtable test, but with 'ip dscp set cs3' done in inet forward chain. Expect that some packets have been mangled (before flowtable offload became effective) while some pass without mangling (after offload succeeds). 2. repeat flowtable test, but with 'ip dscp set cs3' done in veth0:ingress. Expect that all packets pass with cs3 dscp field. 3. same as 2, but use veth1:egress. Expect the same outcome. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2023-05-10selftests: nft_flowtable.sh: monitor result file sizesBoris Sukholitko
When running nft_flowtable.sh in VM on a busy server we've found that the time of the netcat file transfers vary wildly. Therefore replace hardcoded 3 second sleep with the loop checking for a change in the file sizes. Once no change in detected we test the results. Nice side effect is that we shave 1 second sleep in the fast case (hard-coded 3 second sleep vs two 1 second sleeps). Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: Boris Sukholitko <boris.sukholitko@broadcom.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2023-05-10selftests: nft_flowtable.sh: wait for specific nc pidsBoris Sukholitko
Doing wait with no parameters may interfere with some of the tests having their own background processes. Although no such test is currently present, the cleanup is useful to rely on the nft_flowtable.sh for local development (e.g. running background tcpdump command during the tests). Signed-off-by: Boris Sukholitko <boris.sukholitko@broadcom.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2023-05-10selftests: nft_flowtable.sh: no need for ps -x optionBoris Sukholitko
Some ps commands (e.g. busybox derived) have no -x option. For the purposes of hash calculation of the list of processes this option is inessential. Signed-off-by: Boris Sukholitko <boris.sukholitko@broadcom.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2023-05-10selftests: nft_flowtable.sh: use /proc for pid checkingBoris Sukholitko
Some ps commands (e.g. busybox derived) have no -p option. Use /proc for pid existence check. Signed-off-by: Boris Sukholitko <boris.sukholitko@broadcom.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2023-05-10netfilter: conntrack: fix possible bug_on with enable_hooks=1Florian Westphal
I received a bug report (no reproducer so far) where we trip over 712 rcu_read_lock(); 713 ct_hook = rcu_dereference(nf_ct_hook); 714 BUG_ON(ct_hook == NULL); // here In nf_conntrack_destroy(). First turn this BUG_ON into a WARN. I think it was triggered via enable_hooks=1 flag. When this flag is turned on, the conntrack hooks are registered before nf_ct_hook pointer gets assigned. This opens a short window where packets enter the conntrack machinery, can have skb->_nfct set up and a subsequent kfree_skb might occur before nf_ct_hook is set. Call nf_conntrack_init_end() to set nf_ct_hook before we register the pernet ops. Fixes: ba3fbe663635 ("netfilter: nf_conntrack: provide modparam to always register conntrack hooks") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2023-05-10netfilter: nf_tables: always release netdev hooks from notifierFlorian Westphal
This reverts "netfilter: nf_tables: skip netdev events generated on netns removal". The problem is that when a veth device is released, the veth release callback will also queue the peer netns device for removal. Its possible that the peer netns is also slated for removal. In this case, the device memory is already released before the pre_exit hook of the peer netns runs: BUG: KASAN: slab-use-after-free in nf_hook_entry_head+0x1b8/0x1d0 Read of size 8 at addr ffff88812c0124f0 by task kworker/u8:1/45 Workqueue: netns cleanup_net Call Trace: nf_hook_entry_head+0x1b8/0x1d0 __nf_unregister_net_hook+0x76/0x510 nft_netdev_unregister_hooks+0xa0/0x220 __nft_release_hook+0x184/0x490 nf_tables_pre_exit_net+0x12f/0x1b0 .. Order is: 1. First netns is released, veth_dellink() queues peer netns device for removal 2. peer netns is queued for removal 3. peer netns device is released, unreg event is triggered 4. unreg event is ignored because netns is going down 5. pre_exit hook calls nft_netdev_unregister_hooks but device memory might be free'd already. Fixes: 68a3765c659f ("netfilter: nf_tables: skip netdev events generated on netns removal") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2023-05-09net: phy: bcm7xx: Correct read from expansion registerFlorian Fainelli
Since the driver works in the "legacy" addressing mode, we need to write to the expansion register (0x17) with bits 11:8 set to 0xf to properly select the expansion register passed as argument. Fixes: f68d08c437f9 ("net: phy: bcm7xxx: Add EPHY entry for 72165") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230508231749.1681169-1-f.fainelli@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-09net: Fix load-tearing on sk->sk_stamp in sock_recv_cmsgs().Kuniyuki Iwashima
KCSAN found a data race in sock_recv_cmsgs() where the read access to sk->sk_stamp needs READ_ONCE(). BUG: KCSAN: data-race in packet_recvmsg / packet_recvmsg write (marked) to 0xffff88803c81f258 of 8 bytes by task 19171 on cpu 0: sock_write_timestamp include/net/sock.h:2670 [inline] sock_recv_cmsgs include/net/sock.h:2722 [inline] packet_recvmsg+0xb97/0xd00 net/packet/af_packet.c:3489 sock_recvmsg_nosec net/socket.c:1019 [inline] sock_recvmsg+0x11a/0x130 net/socket.c:1040 sock_read_iter+0x176/0x220 net/socket.c:1118 call_read_iter include/linux/fs.h:1845 [inline] new_sync_read fs/read_write.c:389 [inline] vfs_read+0x5e0/0x630 fs/read_write.c:470 ksys_read+0x163/0x1a0 fs/read_write.c:613 __do_sys_read fs/read_write.c:623 [inline] __se_sys_read fs/read_write.c:621 [inline] __x64_sys_read+0x41/0x50 fs/read_write.c:621 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x72/0xdc read to 0xffff88803c81f258 of 8 bytes by task 19183 on cpu 1: sock_recv_cmsgs include/net/sock.h:2721 [inline] packet_recvmsg+0xb64/0xd00 net/packet/af_packet.c:3489 sock_recvmsg_nosec net/socket.c:1019 [inline] sock_recvmsg+0x11a/0x130 net/socket.c:1040 sock_read_iter+0x176/0x220 net/socket.c:1118 call_read_iter include/linux/fs.h:1845 [inline] new_sync_read fs/read_write.c:389 [inline] vfs_read+0x5e0/0x630 fs/read_write.c:470 ksys_read+0x163/0x1a0 fs/read_write.c:613 __do_sys_read fs/read_write.c:623 [inline] __se_sys_read fs/read_write.c:621 [inline] __x64_sys_read+0x41/0x50 fs/read_write.c:621 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x72/0xdc value changed: 0xffffffffc4653600 -> 0x0000000000000000 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 19183 Comm: syz-executor.5 Not tainted 6.3.0-rc7-02330-gca6270c12e20 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Fixes: 6c7c98bad488 ("sock: avoid dirtying sk_stamp, if possible") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20230508175543.55756-1-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-09net: stmmac: Initialize MAC_ONEUS_TIC_COUNTER registerMarek Vasut
Initialize MAC_ONEUS_TIC_COUNTER register with correct value derived from CSR clock, otherwise EEE is unstable on at least NXP i.MX8M Plus and Micrel KSZ9131RNX PHY, to the point where not even ARP request can be sent out. i.MX 8M Plus Applications Processor Reference Manual, Rev. 1, 06/2021 11.7.6.1.34 One-microsecond Reference Timer (MAC_ONEUS_TIC_COUNTER) defines this register as: " This register controls the generation of the Reference time (1 microsecond tic) for all the LPI timers. This timer has to be programmed by the software initially. ... The application must program this counter so that the number of clock cycles of CSR clock is 1us. (Subtract 1 from the value before programming). For example if the CSR clock is 100MHz then this field needs to be programmed to value 100 - 1 = 99 (which is 0x63). This is required to generate the 1US events that are used to update some of the EEE related counters. " The reset value is 0x63 on i.MX8M Plus, which means expected CSR clock are 100 MHz. However, the i.MX8M Plus "enet_qos_root_clk" are 266 MHz instead, which means the LPI timers reach their count much sooner on this platform. This is visible using a scope by monitoring e.g. exit from LPI mode on TX_CTL line from MAC to PHY. This should take 30us per STMMAC_DEFAULT_TWT_LS setting, during which the TX_CTL line transitions from tristate to low, and 30 us later from low to high. On i.MX8M Plus, this transition takes 11 us, which matches the 30us * 100/266 formula for misconfigured MAC_ONEUS_TIC_COUNTER register. Configure MAC_ONEUS_TIC_COUNTER based on CSR clock, so that the LPI timers have correct 1us reference. This then fixes EEE on i.MX8M Plus with Micrel KSZ9131RNX PHY. Fixes: 477286b53f55 ("stmmac: add GMAC4 core support") Signed-off-by: Marek Vasut <marex@denx.de> Tested-by: Harald Seiler <hws@denx.de> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Tested-by: Francesco Dolcini <francesco.dolcini@toradex.com> # Toradex Verdin iMX8MP Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Link: https://lore.kernel.org/r/20230506235845.246105-1-marex@denx.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-09nfs: fix another case of NULL/IS_ERR confusion wrt folio pointersLinus Torvalds
Dan has been improving on the smatch error pointer checks, and pointed at another case where the __filemap_get_folio() conversion to error pointers had been overlooked. This time because it was hidden behind the filemap_grab_folio() helper function that is a wrapper around it. Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Cc: Anna Schumaker <anna@kernel.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-05-09Merge tag 'for-6.4-rc1-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: - fix backward leaf iteration which could possibly return the same key - fix assertion when device add and balance race for exclusive operation - fix regression when freeing device, state tree would leak after device replace - fix attempt to clear space cache v1 when block-group-tree is enabled - fix potential i_size corruption when encoded write races with send v2 and enabled no-holes (the race is hard to hit though, the window is a few instructions wide) - fix wrong bitmap API use when checking empty zones, parameters were swapped but not causing a bug due to other code - prevent potential qgroup leak if subvolume create does not commit transaction (which is pending in the development queue) - error handling and reporting: - abort transaction when sibling keys check fails for leaves - print extent buffers when sibling keys check fails * tag 'for-6.4-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: don't free qgroup space unless specified btrfs: fix encoded write i_size corruption with no-holes btrfs: zoned: fix wrong use of bitops API in btrfs_ensure_empty_zones btrfs: properly reject clear_cache and v1 cache for block-group-tree btrfs: print extent buffers when sibling keys check fails btrfs: abort transaction when sibling keys check fails for leaves btrfs: fix leak of source device allocation state after device replace btrfs: fix assertion of exclop condition when starting balance btrfs: fix btrfs_prev_leaf() to not return the same key twice
2023-05-09platform/mellanox: fix potential race in mlxbf-tmfifo driverLiming Sun
This commit adds memory barrier for the 'vq' update in function mlxbf_tmfifo_virtio_find_vqs() to avoid potential race due to out-of-order memory write. It also adds barrier for the 'is_ready' flag to make sure the initializations are visible before this flag is checked. Signed-off-by: Liming Sun <limings@nvidia.com> Reviewed-by: Vadim Pasternak <vadimp@nvidia.com> Link: https://lore.kernel.org/r/b98c0ab61d644ba38fa9b3fd1607b138b0dd820b.1682518748.git.limings@nvidia.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-05-09linux/dim: Do nothing if no time delta between samplesRoy Novich
Add return value for dim_calc_stats. This is an indication for the caller if curr_stats was assigned by the function. Avoid using curr_stats uninitialized over {rdma/net}_dim, when no time delta between samples. Coverity reported this potential use of an uninitialized variable. Fixes: 4c4dbb4a7363 ("net/mlx5e: Move dynamic interrupt coalescing code to include/linux") Fixes: cb3c7fd4f839 ("net/mlx5e: Support adaptive RX coalescing") Signed-off-by: Roy Novich <royno@nvidia.com> Reviewed-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Michal Kubiak <michal.kubiak@intel.com> Link: https://lore.kernel.org/r/20230507135743.138993-1-tariqt@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-05-09platform/x86: touchscreen_dmi: Add info for the Dexp Ursus KX210iAndrey Avdeev
Add touchscreen info for the Dexp Ursus KX210i Signed-off-by: Andrey Avdeev <jamesstoun@gmail.com> Link: https://lore.kernel.org/r/ZE4gRgzRQCjXFYD0@avdeevavpc Cc: stable@vger.kernel.org Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-05-09platform/x86: touchscreen_dmi: Add upside-down quirk for GDIX1002 ts on the ↵Hans de Goede
Juno Tablet The Juno Computers Juno Tablet has an upside-down mounted Goodix touchscreen. Add a quirk to invert both axis to correct for this. Link: https://junocomputers.com/us/product/juno-tablet/ Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20230505210323.43177-1-hdegoede@redhat.com
2023-05-09platform/x86: thinkpad_acpi: Add profile force abilityMark Pearson
There has been a lot of confusion around which platform profiles are supported on various platforms and it would be useful to have a debug method to be able to override the profile mode that is selected. I don't expect this to be used in anything other than debugging in conjunction with Lenovo engineers - but it does give a way to get a system working whilst we wait for either FW fixes, or a driver fix to land upstream, if something is wonky in the mode detection logic Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca> Link: https://lore.kernel.org/r/20230505132523.214338-2-mpearson-lenovo@squebb.ca Cc: stable@vger.kernel.org Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-05-09platform/x86: thinkpad_acpi: Fix platform profiles on T490Mark Pearson
I had incorrectly thought that PSC profiles were not usable on Intel platforms so had blocked them in the driver initialistion. This broke platform profiles on the T490. After discussion with the FW team PSC does work on Intel platforms and should be allowed. Note - it's possible this may impact other platforms where it is advertised but special driver support that only Windows has is needed. But if it does then they will need fixing via quirks. Please report any issues to me so I can get them addressed - but I haven't found any problems in testing...yet Fixes: bce6243f767f ("platform/x86: thinkpad_acpi: do not use PSC mode on Intel platforms") Link: https://bugzilla.redhat.com/show_bug.cgi?id=2177962 Cc: stable@vger.kernel.org Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca> Link: https://lore.kernel.org/r/20230505132523.214338-1-mpearson-lenovo@squebb.ca Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-05-09platform/x86: hp-wmi: add micmute to hp_wmi_keymap structFae
Fixes micmute key of HP Envy X360 ey0xxx. Signed-off-by: Fae <faenkhauser@gmail.com> Link: https://lore.kernel.org/r/20230425063644.11828-1-faenkhauser@gmail.com Cc: stable@vger.kernel.org Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-05-09platform/x86/intel-uncore-freq: Return error on write frequencySrinivas Pandruvada
Currently when the uncore_write() returns error, it is silently ignored. Return error to user space when uncore_write() fails. Fixes: 49a474c7ba51 ("platform/x86: Add support for Uncore frequency control") Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Reviewed-by: Zhang Rui <rui.zhang@intel.com> Tested-by: Wendy Wang <wendy.wang@intel.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20230418153230.679094-1-srinivas.pandruvada@linux.intel.com Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-05-08media: nxp: imx8-isi: fix buiding on 32-bitArnd Bergmann
The #if check is wrong, leading to a build failure: drivers/media/platform/nxp/imx8-isi/imx8-isi-hw.c: In function 'mxc_isi_channel_set_inbuf': drivers/media/platform/nxp/imx8-isi/imx8-isi-hw.c:33:5: error: "CONFIG_ARCH_DMA_ADDR_T_64BIT" is not defined, evaluates to 0 [-Werror=undef] 33 | #if CONFIG_ARCH_DMA_ADDR_T_64BIT | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ This could just be an #ifdef, but it seems nicer to just remove the check entirely. Apparently the only reason for the #ifdef is to avoid another warning: drivers/media/platform/nxp/imx8-isi/imx8-isi-hw.c:55:24: error: right shift count >= width of type [-Werror=shift-count-overflow] But this is best avoided by using the lower_32_bits()/upper_32_bits() helpers. Fixes: cf21f328fcaf ("media: nxp: Add i.MX8 ISI driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-05-08platform/x86: intel_scu_pcidrv: Add back PCI ID for MedfieldJulian Winkler
This id was removed in commit b47018a778c1 ("platform/x86: intel_scu_ipc: Remove Lincroft support"), saying it is only used on Moorestown, but apparently the same id is also used on Medfield. Tested on the Medfield based Motorola RAZR i smartphone. Signed-off-by: Julian Winkler <julian.winkler1@web.de> Link: https://lore.kernel.org/r/20230416154932.6579-1-julian.winkler1@web.de Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-05-08media: platform: mtk-mdp3: work around unused-variable warningArnd Bergmann
When CONFIG_OF is disabled, the 'data' variable is not used at all because of_match_node() turns into a dummy macro: drivers/media/platform/mediatek/mdp3/mtk-mdp3-comp.c: In function 'mdp_comp_sub_create': drivers/media/platform/mediatek/mdp3/mtk-mdp3-comp.c:1038:36: error: unused variable 'data' [-Werror=unused-variable] 1038 | const struct mtk_mdp_driver_data *data = mdp->mdp_data; | ^~~~ Remove the variable again by moving the pointer dereference into the of_match_node call. Fixes: b385b991ef2f ("media: platform: mtk-mdp3: chip config split about subcomponents") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-05-08media: nxp: ignore unused suspend operationsArnd Bergmann
gcc warns about some functions being unused when CONFIG_PM_SLEEP is disabled: drivers/media/platform/nxp/imx8-isi/imx8-isi-core.c:328:12: error: 'mxc_isi_pm_resume' defined but not used [-Werror=unused-function] 328 | static int mxc_isi_pm_resume(struct device *dev) | ^~~~~~~~~~~~~~~~~ drivers/media/platform/nxp/imx8-isi/imx8-isi-core.c:314:12: error: 'mxc_isi_pm_suspend' defined but not used [-Werror=unused-function] 314 | static int mxc_isi_pm_suspend(struct device *dev) | ^~~~~~~~~~~~~~~~~~ Use the modern SYSTEM_SLEEP_PM_OPS()/RUNTIME_PM_OPS() helpers in place of the old SET_SYSTEM_SLEEP_PM_OPS()/SET_RUNTIME_PM_OPS() ones. By convention, use pm_ptr() to guard the reference to the operations. This makes no difference as long as the driver requires CONFIG_PM, but is what users of SET_RUNTIME_PM_OPS() are supposed to do. Fixes: cf21f328fcaf ("media: nxp: Add i.MX8 ISI driver") Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-05-08media: rcar-vin: Select correct interrupt mode for V4L2_FIELD_ALTERNATENiklas Söderlund
When adding proper support for V4L2_FIELD_ALTERNATE it was missed that this field format should trigger an interrupt for each field, not just for the whole frame. Fix this by marking it as progressive in the capture setup, which will then select the correct interrupt mode. Tested on both Gen2 and Gen3 with the result of a doubling of the frame rate for V4L2_FIELD_ALTERNATE. From a PAL video source the frame rate is now 50, which is expected for alternate field capture. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-05-08media: rcar-vin: Fix NV12 size alignmentNiklas Söderlund
When doing format validation for NV12 the width and height should be aligned to 32 pixels. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-05-08media: rcar-vin: Gen3 can not scale NV12Niklas Söderlund
The VIN modules on Gen3 can not scale NV12, fail format validation if the user tries. Currently no frames are produced if this is attempted. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-05-07Linux 6.4-rc1v6.4-rc1Linus Torvalds
2023-05-07Merge tag 'perf-tools-for-v6.4-3-2023-05-06' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tool updates from Arnaldo Carvalho de Melo: "Third version of perf tool updates, with the build problems with with using a 'vmlinux.h' generated from the main build fixed, and the bpf skeleton build disabled by default. Build: - Require libtraceevent to build, one can disable it using NO_LIBTRACEEVENT=1. It is required for tools like 'perf sched', 'perf kvm', 'perf trace', etc. libtraceevent is available in most distros so installing 'libtraceevent-devel' should be a one-time event to continue building perf as usual. Using NO_LIBTRACEEVENT=1 produces tooling that is functional and sufficient for lots of users not interested in those libtraceevent dependent features. - Allow Python support in 'perf script' when libtraceevent isn't linked, as not all features requires it, for instance Intel PT does not use tracepoints. - Error if the python interpreter needed for jevents to work isn't available and NO_JEVENTS=1 isn't set, preventing a build without support for JSON vendor events, which is a rare but possible condition. The two check error messages: $(error ERROR: No python interpreter needed for jevents generation. Install python or build with NO_JEVENTS=1.) $(error ERROR: Python interpreter needed for jevents generation too old (older than 3.6). Install a newer python or build with NO_JEVENTS=1.) - Make libbpf 1.0 the minimum required when building with out of tree, distro provided libbpf. - Use libsdtc++'s and LLVM's libcxx's __cxa_demangle, a portable C++ demangler, add 'perf test' entry for it. - Make binutils libraries opt in, as distros disable building with it due to licensing, they were used for C++ demangling, for instance. - Switch libpfm4 to opt-out rather than opt-in, if libpfm-devel (or equivalent) isn't installed, we'll just have a build warning: Makefile.config:1144: libpfm4 not found, disables libpfm4 support. Please install libpfm4-dev - Add a feature test for scandirat(), that is not implemented so far in musl and uclibc, disabling features that need it, such as scanning for tracepoints in /sys/kernel/tracing/events. perf BPF filters: - New feature where BPF can be used to filter samples, for instance: $ sudo ./perf record -e cycles --filter 'period > 1000' true $ sudo ./perf script perf-exec 2273949 546850.708501: 5029 cycles: ffffffff826f9e25 finish_wait+0x5 ([kernel.kallsyms]) perf-exec 2273949 546850.708508: 32409 cycles: ffffffff826f9e25 finish_wait+0x5 ([kernel.kallsyms]) perf-exec 2273949 546850.708526: 143369 cycles: ffffffff82b4cdbf xas_start+0x5f ([kernel.kallsyms]) perf-exec 2273949 546850.708600: 372650 cycles: ffffffff8286b8f7 __pagevec_lru_add+0x117 ([kernel.kallsyms]) perf-exec 2273949 546850.708791: 482953 cycles: ffffffff829190de __mod_memcg_lruvec_state+0x4e ([kernel.kallsyms]) true 2273949 546850.709036: 501985 cycles: ffffffff828add7c tlb_gather_mmu+0x4c ([kernel.kallsyms]) true 2273949 546850.709292: 503065 cycles: 7f2446d97c03 _dl_map_object_deps+0x973 (/usr/lib/x86_64-linux-gnu/ld-linux-x86-64.so.2) - In addition to 'period' (PERF_SAMPLE_PERIOD), the other PERF_SAMPLE_ can be used for filtering, and also some other sample accessible values, from tools/perf/Documentation/perf-record.txt: Essentially the BPF filter expression is: <term> <operator> <value> (("," | "||") <term> <operator> <value>)* The <term> can be one of: ip, id, tid, pid, cpu, time, addr, period, txn, weight, phys_addr, code_pgsz, data_pgsz, weight1, weight2, weight3, ins_lat, retire_lat, p_stage_cyc, mem_op, mem_lvl, mem_snoop, mem_remote, mem_lock, mem_dtlb, mem_blk, mem_hops The <operator> can be one of: ==, !=, >, >=, <, <=, & The <value> can be one of: <number> (for any term) na, load, store, pfetch, exec (for mem_op) l1, l2, l3, l4, cxl, io, any_cache, lfb, ram, pmem (for mem_lvl) na, none, hit, miss, hitm, fwd, peer (for mem_snoop) remote (for mem_remote) na, locked (for mem_locked) na, l1_hit, l1_miss, l2_hit, l2_miss, any_hit, any_miss, walk, fault (for mem_dtlb) na, by_data, by_addr (for mem_blk) hops0, hops1, hops2, hops3 (for mem_hops) perf lock contention: - Show lock type with address. - Track and show mmap_lock, siglock and per-cpu rq_lock with address. This is done for mmap_lock by following the current->mm pointer: $ sudo ./perf lock con -abl -- sleep 10 contended total wait max wait avg wait address symbol ... 16344 312.30 ms 2.22 ms 19.11 us ffff8cc702595640 17686 310.08 ms 1.49 ms 17.53 us ffff8cc7025952c0 3 84.14 ms 45.79 ms 28.05 ms ffff8cc78114c478 mmap_lock 3557 76.80 ms 68.75 us 21.59 us ffff8cc77ca3af58 1 68.27 ms 68.27 ms 68.27 ms ffff8cda745dfd70 9 54.53 ms 7.96 ms 6.06 ms ffff8cc7642a48b8 mmap_lock 14629 44.01 ms 60.00 us 3.01 us ffff8cc7625f9ca0 3481 42.63 ms 140.71 us 12.24 us ffffffff937906ac vmap_area_lock 16194 38.73 ms 42.15 us 2.39 us ffff8cd397cbc560 11 38.44 ms 10.39 ms 3.49 ms ffff8ccd6d12fbb8 mmap_lock 1 5.43 ms 5.43 ms 5.43 ms ffff8cd70018f0d8 1674 5.38 ms 422.93 us 3.21 us ffffffff92e06080 tasklist_lock 581 4.51 ms 130.68 us 7.75 us ffff8cc9b1259058 5 3.52 ms 1.27 ms 703.23 us ffff8cc754510070 112 3.47 ms 56.47 us 31.02 us ffff8ccee38b3120 381 3.31 ms 73.44 us 8.69 us ffffffff93790690 purge_vmap_area_lock 255 3.19 ms 36.35 us 12.49 us ffff8d053ce30c80 - Update default map size to 16384. - Allocate single letter option -M for --map-nr-entries, as it is proving being frequently used. - Fix struct rq lock access for older kernels with BPF's CO-RE (Compile once, run everywhere). - Fix problems found with MSAn. perf report/top: - Add inline information when using --call-graph=fp or lbr, as was already done to the --call-graph=dwarf callchain mode. - Improve the 'srcfile' sort key performance by really using an optimization introduced in 6.2 for the 'srcline' sort key that avoids calling addr2line for comparision with each sample. perf sched: - Make 'perf sched latency/map/replay' to use "sched:sched_waking" instead of "sched:sched_waking", consistent with 'perf record' since d566a9c2d482 ("perf sched: Prefer sched_waking event when it exists"). perf ftrace: - Make system wide the default target for latency subcommand, run the following command then generate some network traffic and press control+C: # perf ftrace latency -T __kfree_skb ^C DURATION | COUNT | GRAPH | 0 - 1 us | 27 | ############# | 1 - 2 us | 22 | ########### | 2 - 4 us | 8 | #### | 4 - 8 us | 5 | ## | 8 - 16 us | 24 | ############ | 16 - 32 us | 2 | # | 32 - 64 us | 1 | | 64 - 128 us | 0 | | 128 - 256 us | 0 | | 256 - 512 us | 0 | | 512 - 1024 us | 0 | | 1 - 2 ms | 0 | | 2 - 4 ms | 0 | | 4 - 8 ms | 0 | | 8 - 16 ms | 0 | | 16 - 32 ms | 0 | | 32 - 64 ms | 0 | | 64 - 128 ms | 0 | | 128 - 256 ms | 0 | | 256 - 512 ms | 0 | | 512 - 1024 ms | 0 | | 1 - ... s | 0 | | # perf top: - Add --branch-history (LBR: Last Branch Record) option, just like already available for 'perf record'. - Fix segfault in thread__comm_len() where thread->comm was being used outside thread->comm_lock. perf annotate: - Allow configuring objdump and addr2line in ~/.perfconfig., so that you can use alternative binaries, such as llvm's. perf kvm: - Add TUI mode for 'perf kvm stat report'. Reference counting: - Add reference count checking infrastructure to check for use after free, done to the 'cpumap', 'namespaces', 'maps' and 'map' structs, more to come. To build with it use -DREFCNT_CHECKING=1 in the make command line to build tools/perf. Documented at: https://perf.wiki.kernel.org/index.php/Reference_Count_Checking - The above caught, for instance, fix, present in this series: - Fix maps use after put in 'perf test "Share thread maps"': 'maps' is copied from leader, but the leader is put on line 79 and then 'maps' is used to read the reference count below - so a use after put, with the put of maps happening within thread__put. Fixed by reversing the order of puts so that the leader is put last. - Also several fixes were made to places where reference counts were not being held. - Make this one of the tests in 'make -C tools/perf build-test' to regularly build test it and to make sure no direct access to the reference counted structs are made, doing that via accessors to check the validity of the struct pointer. ARM64: - Fix 'perf report' segfault when filtering coresight traces by sparse lists of CPUs. - Add support for 'simd' as a sort field for 'perf report', to show ARM's NEON SIMD's predicate flags: "partial" and "empty". arm64 vendor events: - Add N1 metrics. Intel vendor events: - Add graniterapids, grandridge and sierraforrest events. - Refresh events for: alderlake, aldernaken, broadwell, broadwellde, broadwellx, cascadelakx, haswell, haswellx, icelake, icelakex, jaketown, meteorlake, knightslanding, sandybridge, sapphirerapids, silvermont, skylake, tigerlake and westmereep-dp - Refresh metrics for alderlake-n, broadwell, broadwellde, broadwellx, haswell, haswellx, icelakex, ivybridge, ivytown and skylakex. perf stat: - Implement --topdown using JSON metrics. - Add TopdownL1 JSON metric as a default if present, but disable it for now for some Intel hybrid architectures, a series of patches addressing this is being reviewed and will be submitted for v6.5. - Use metrics for --smi-cost. - Update topdown documentation. Vendor events (JSON) infrastructure: - Add support for computing and printing metric threshold values. For instance, here is one found in thesapphirerapids json file: { "BriefDescription": "Percentage of cycles spent in System Management Interrupts.", "MetricExpr": "((msr@aperf@ - cycles) / msr@aperf@ if msr@smi@ > 0 else 0)", "MetricGroup": "smi", "MetricName": "smi_cycles", "MetricThreshold": "smi_cycles > 0.1", "ScaleUnit": "100%" }, - Test parsing metric thresholds with the fake PMU in 'perf test pmu-events'. - Support for printing metric thresholds in 'perf list'. - Add --metric-no-threshold option to 'perf stat'. - Add rand (reverse and) and has_pmem (optane memory) support to metrics. - Sort list of input files to avoid depending on the order from readdir() helping in obtaining reproducible builds. S/390: - Add common metrics: - CPI (cycles per instruction), prbstate (ratio of instructions executed in problem state compared to total number of instructions), l1mp (Level one instruction and data cache misses per 100 instructions). - Add cache metrics for z13, z14, z15 and z16. - Add metric for TLB and cache. ARM: - Add raw decoding for SPE (Statistical Profiling Extension) v1.3 MTE (Memory Tagging Extension) and MOPS (Memory Operations) load/store. Intel PT hardware tracing: - Add event type names UINTR (User interrupt delivered) and UIRET (Exiting from user interrupt routine), documented in table 32-50 "CFE Packet Type and Vector Fields Details" in the Intel Processor Trace chapter of The Intel SDM Volume 3 version 078. - Add support for new branch instructions ERETS and ERETU. - Fix CYC timestamps after standalone CBR ARM CoreSight hardware tracing: - Allow user to override timestamp and contextid settings. - Fix segfault in dso lookup. - Fix timeless decode mode detection. - Add separate decode paths for timeless and per-thread modes. auxtrace: - Fix address filter entire kernel size. Miscellaneous: - Fix use-after-free and unaligned bugs in the PLT handling routines. - Use zfree() to reduce chances of use after free. - Add missing 0x prefix for addresses printed in hexadecimal in 'perf probe'. - Suppress massive unsupported target platform errors in the unwind code. - Fix return incorrect build_id size in elf_read_build_id(). - Fix 'perf scripts intel-pt-events.py' IPC output for Python 2 . - Add missing new parameter in kfree_skb tracepoint to the python scripts using it. - Add 'perf bench syscall fork' benchmark. - Add support for printing PERF_MEM_LVLNUM_UNC (Uncached access) in 'perf mem'. - Fix wrong size expectation for perf test 'Setup struct perf_event_attr' caused by the patch adding perf_event_attr::config3. - Fix some spelling mistakes" * tag 'perf-tools-for-v6.4-3-2023-05-06' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (365 commits) Revert "perf build: Make BUILD_BPF_SKEL default, rename to NO_BPF_SKEL" Revert "perf build: Warn for BPF skeletons if endian mismatches" perf metrics: Fix SEGV with --for-each-cgroup perf bpf skels: Stop using vmlinux.h generated from BTF, use subset of used structs + CO-RE perf stat: Separate bperf from bpf_profiler perf test record+probe_libc_inet_pton: Fix call chain match on x86_64 perf test record+probe_libc_inet_pton: Fix call chain match on s390 perf tracepoint: Fix memory leak in is_valid_tracepoint() perf cs-etm: Add fix for coresight trace for any range of CPUs perf build: Fix unescaped # in perf build-test perf unwind: Suppress massive unsupported target platform errors perf script: Add new parameter in kfree_skb tracepoint to the python scripts using it perf script: Print raw ip instead of binary offset for callchain perf symbols: Fix return incorrect build_id size in elf_read_build_id() perf list: Modify the warning message about scandirat(3) perf list: Fix memory leaks in print_tracepoint_events() perf lock contention: Rework offset calculation with BPF CO-RE perf lock contention: Fix struct rq lock access perf stat: Disable TopdownL1 on hybrid perf stat: Avoid SEGV on counter->name ...
2023-05-07Merge tag 'core-debugobjects-2023-05-06' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull debugobjects fix from Thomas Gleixner: "A single fix for debugobjects: The recent fix to ensure atomicity of lookup and allocation inadvertently broke the pool refill mechanism, so that debugobject OOMs now in certain situations. The reason is that the functions which got updated no longer invoke debug_objecs_init(), which is now the only place to care about refilling the tracking object pool. Restore the original behaviour by adding explicit refill opportunities to those places" * tag 'core-debugobjects-2023-05-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: debugobject: Ensure pool refill (again)
2023-05-07Merge tag 'v6.4-p2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: - A long-standing bug in crypto_engine - A buggy but harmless check in the sun8i-ss driver - A regression in the CRYPTO_USER interface * tag 'v6.4-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: api - Fix CRYPTO_USER checks for report function crypto: engine - fix crypto_queue backlog handling crypto: sun8i-ss - Fix a test in sun8i_ss_setup_ivs()
2023-05-07Merge tag '6.4-rc-smb3-client-fixes-part2' of ↵Linus Torvalds
git://git.samba.org/sfrench/cifs-2.6 Pull cifs fixes from Steve French: "smb3 client fixes, mostly DFS or reconnect related: - Two DFS connection sharing fixes - DFS refresh fix - Reconnect fix - Two potential use after free fixes - Also print prefix patch in mount debug msg - Two small cleanup fixes" * tag '6.4-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6: cifs: Remove unneeded semicolon cifs: fix sharing of DFS connections cifs: avoid potential races when handling multiple dfs tcons cifs: protect access of TCP_Server_Info::{origin,leaf}_fullpath cifs: fix potential race when tree connecting ipc cifs: fix potential use-after-free bugs in TCP_Server_Info::hostname cifs: print smb3_fs_context::source when mounting cifs: protect session status check in smb2_reconnect() SMB3.1.1: correct definition for app_instance_id create contexts
2023-05-07Merge tag 'clk-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes from Stephen Boyd: "A couple more patches that would be good to get into -rc1: - Revert an i.MX patch that's causing video failures because division math goes sideways - Fix a clang + W=1 build isue where FIELD_PREP() is taking a 32-bit variable instead of the usual u64 type - Fix a Kconfig bug in the StarFive JH7110 clk config that selects a reset controller when it can't be selected" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: starfive: Fix RESET_STARFIVE_JH7110 can't be selected in a specified case clk: sp7021: Adjust width of _m in HWM_FIELD_PREP() Revert "clk: imx: composite-8m: Add support to determine_rate"
2023-05-07Merge tag 'mailbox-v6.4' of ↵Linus Torvalds
git://git.linaro.org/landing-teams/working/fujitsu/integration Pull mailbox updates from Jassi Brar: - mailbox api: allow direct registration to a channel and convert omap and pcc to use mbox_bind_client - omap and hi6220 : use of_property_read_bool - test: fix double-free and use spinlock header - rockchip and bcm-pdc: drop of_match_ptr - mpfs: change config symbol - mediatek gce: support MT6795 - qcom apcs: consolidate of_device_id and support IPQ9574 * tag 'mailbox-v6.4' of git://git.linaro.org/landing-teams/working/fujitsu/integration: dt-bindings: mailbox: qcom: add compatible for IPQ9574 SoC mailbox: qcom-apcs-ipc: do not grow the of_device_id dt-bindings: mailbox: qcom,apcs-kpss-global: use fallbacks for few variants dt-bindings: mailbox: mediatek,gce-mailbox: Add support for MT6795 mailbox: mpfs: convert SOC_MICROCHIP_POLARFIRE to ARCH_MICROCHIP_POLARFIRE mailbox: bcm-pdc: drop of_match_ptr for ID table mailbox: rockchip: drop of_match_ptr for ID table mailbox: mailbox-test: Fix potential double-free in mbox_test_message_write() mailbox: mailbox-test: Explicitly include header for spinlock support mailbox: Use of_property_read_bool() for boolean properties mailbox: pcc: Use mbox_bind_client mailbox: omap: Use mbox_bind_client mailbox: Allow direct registration to a channel
generated by cgit (git 2.34.1) at 2025-09-07 10:52:29 +0000