| Age | Commit message (Collapse) | Author |
|---|
|
64k pages introduce the situation in this diagram when the HCA 4k page
size is being used:
+-------------------------------------------+ <--- 64k aligned VA
| |
| HCA 4k page |
| |
+-------------------------------------------+
| o |
| |
| o |
| |
| o |
+-------------------------------------------+
| |
| HCA 4k page |
| |
+-------------------------------------------+ <--- Live HCA page
|OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO| <--- offset
| | <--- VA
| MR data |
+-------------------------------------------+
| |
| HCA 4k page |
| |
+-------------------------------------------+
| o |
| |
| o |
| |
| o |
+-------------------------------------------+
| |
| HCA 4k page |
| |
+-------------------------------------------+
The VA addresses are coming from rdma-core in this diagram can be
arbitrary, but for 64k pages, the VA may be offset by some number of HCA
4k pages and followed by some number of HCA 4k pages.
The current iterator doesn't account for either the preceding 4k pages or
the following 4k pages.
Fix the issue by extending the ib_block_iter to contain the number of DMA
pages like comment [1] says and by using __sg_advance to start the
iterator at the first live HCA page.
The changes are contained in a parallel set of iterator start and next
functions that are umem aware and specific to umem since there is one user
of the rdma_for_each_block() without umem.
These two fixes prevents the extra pages before and after the user MR
data.
Fix the preceding pages by using the __sq_advance field to start at the
first 4k page containing MR data.
Fix the following pages by saving the number of pgsz blocks in the
iterator state and downcounting on each next.
This fix allows for the elimination of the small page crutch noted in the
Fixes.
Fixes: 10c75ccb54e4 ("RDMA/umem: Prevent small pages from being returned by ib_umem_find_best_pgsz()")
Link: https://lore.kernel.org/r/20231129202143.1434-2-shiraz.saleem@intel.com
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
In some potential instances the reference count on struct packet_sock
could be saturated and cause overflows which gets the kernel a bit
confused. To prevent this, move to a 64-bit atomic reference count on
64-bit architectures to prevent the possibility of this type to overflow.
Because we can not handle saturation, using refcount_t is not possible
in this place. Maybe someday in the future if it changes it could be
used. Also, instead of using plain atomic64_t, use atomic_long_t instead.
32-bit machines tend to be memory-limited (i.e. anything that increases
a reference uses so much memory that you can't actually get to 2**32
references). 32-bit architectures also tend to have serious problems
with 64-bit atomics. Hence, atomic_long_t is the more natural solution.
Reported-by: "The UK's National Cyber Security Centre (NCSC)" <security@ncsc.gov.uk>
Co-developed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: stable@kernel.org
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20231201131021.19999-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd fixes from Jason Gunthorpe:
- A small fix for the dirty tracking self test to fail correctly if the
code is buggy
- Fix a tricky syzkaller race UAF with object reference counting
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommufd: Do not UAF during iommufd_put_object()
iommufd: Add iommufd_ctx to iommufd_put_object()
iommufd/selftest: Fix _test_mock_dirty_bitmaps()
|
|
Pull vdpa fixes from Michael Tsirkin:
"Fixes in mlx5 and pds drivers"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
pds_vdpa: set features order
pds_vdpa: clear config callback when status goes to 0
pds_vdpa: fix up format-truncation complaint
vdpa/mlx5: preserve CVQ vringh index
|
|
Merge series from srinivas.kandagatla@linaro.org:
Limit the speaker digital gains to 0dB so that the users will not damage them.
Currently there is a limit in UCM, but this does not stop the user form
changing the digital gains from command line. So limit this in driver
which makes the speakers more safer without active speaker protection in
place.
Apart from this there is also a range check fix in snd_soc_limit_volume
to allow setting this limit correctly.
Tested on Lenovo X13s.
|
|
This fixes a transaction path overflow reported in the snapshot deletion
path, when moving extents to the correct snapshot.
The root of the issue is that creating/deleting a reflink pointer can
generate an unbounded number of updates, if it is allowed to reference
an unbounded number of indirect extents; to prevent this, merging of
reflink pointers has been disabled.
But there's a hole, which is that copygc/rebalance may fragment existing
extents in the course of moving them around, and if an indirect extent
becomes too fragmented we'll then become unable to delete the reflink
pointer.
The eventual solution is going to be to tweak trigger handling so that
we can process large reflink pointers incrementally when necessary, and
notice that trigger updates don't need to be run for the part of the
reflink pointer not changing. That is going to be a bigger project
though, for another patch.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
for_each_btree_key2() runs each loop iteration in a btree transaction,
and thus does not cause SRCU lock hold time problems.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Also, make bch2_extent_drop_ptrs() safer, so it works with extents and
non-extents iterators.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Recently, journal pre-reservations were removed. They were for reserving
space ahead of time in the journal for operations that are required for
journal reclaim, e.g. btree key cache flushing and interior node btree
updates.
Instead we have watermarks - only operations for journal reclaim are
allowed when the journal is low on space, and in general we're quite
good about doing operations in the order that will free up space in the
journal quickest when we're low on space. If we're doing a journal
reclaim operation out of order, we usually do it in nonblocking mode if
it's not freeing up space at the end of the journal.
There's an exceptino though - interior btree node update operations have
to be BCH_WATERMARK_reclaim - once they've been started, and they can't
be nonblocking. Generally this is fine because they'll only be a very
small fraction of transaction commits - but there's an exception, which
is during journal replay.
Journal replay does many btree operations, but doesn't need to commit
them to the journal since they're already in the journal. So killing off
of pre-reservation, plus another change to make journal replay more
efficient by initially doing the replay in sorted btree order, made it
possible for the interior update operations replay generates to fill and
deadlock the journal.
Fix this by introducing a new check on journal space at the _start_ of
an interior update operation. This causes us to block if necessary in
exactly the same way as we used to when interior updates took a journal
pre-reservaiton, but without all the expensive accounting
pre-reservations required.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
The keys being replayed by journal replay have to be synchronized with
updates by other threads that overwrite them. We rely on btree node
locks for synchronizing - but since btree write buffer updates take no
btree locks, that won't work.
Instead, simply disable using the btree write buffer until journal
replay is finished.
This fixes a rare backpointers error in the merge_torture_flakey test.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
The rk3399-gru PCI node addresses are wrong.
In rk3399-gru-scarlet, the bus number in the address should be 0. This is
because bus number assignment is dynamic and not known up front. For FDT,
the bus number is simply ignored.
In rk3399-gru-chromebook, the addresses are simply invalid. The first
"reg" entry must be the configuration space for the device. The entry
should be all 0s except for device/slot and function numbers. The existing
64-bit memory space (0x83000000) entries are not valid because they must
have the BAR address in the lower byte of the first cell.
Warnings for these are enabled by adding the missing 'device_type = "pci"'
for the root port node.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231130191830.2424361-1-robh@kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Fix a number of issues in the cifs filesystem implementation of the FICLONE
ioctl in cifs_remap_file_range(). This is analogous to the previously
fixed bug in cifs_file_copychunk_range() and can share the helper
functions.
Firstly, the invalidation of the destination range is handled incorrectly:
We shouldn't just invalidate the whole file as dirty data in the file may
get lost and we can't just call truncate_inode_pages_range() to invalidate
the destination range as that will erase parts of a partial folio at each
end whilst invalidating and discarding all the folios in the middle. We
need to force all the folios covering the range to be reloaded, but we
mustn't lose dirty data in them that's not in the destination range.
Further, we shouldn't simply round out the range to PAGE_SIZE at each end
as cifs should move to support multipage folios.
Secondly, there's an issue whereby a write may have extended the file
locally, but not have been written back yet. This can leaves the local
idea of the EOF at a later point than the server's EOF. If a clone request
is issued, this will fail on the server with STATUS_INVALID_VIEW_SIZE
(which gets translated to -EIO locally) if the clone source extends past
the server's EOF.
Fix this by:
(0) Flush the source region (already done). The flush does nothing and
the EOF isn't moved if the source region has no dirty data.
(1) Move the EOF to the end of the source region if it isn't already at
least at this point. If we can't do this, for instance if the server
doesn't support it, just flush the entire source file.
(2) Find the folio (if present) at each end of the range, flushing it and
increasing the region-to-be-invalidated to cover those in their
entirety.
(3) Fully discard all the folios covering the range as we want them to be
reloaded.
(4) Then perform the extent duplication.
Thirdly, set i_size after doing the duplicate_extents operation as this
value may be used by various things internally. stat() hides the issue
because setting ->time to 0 causes cifs_getatr() to revalidate the
attributes.
These were causing the cifs/001 xfstest to fail.
Fixes: 04b38d601239 ("vfs: pull btrfs clone API to vfs layer")
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: stable@vger.kernel.org
cc: Christoph Hellwig <hch@lst.de>
cc: Paulo Alcantara <pc@manguebit.com>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Rohith Surabattula <rohiths.msft@gmail.com>
cc: Matthew Wilcox <willy@infradead.org>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: linux-mm@kvack.org
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Fix a number of issues in the cifs filesystem implementation of the
copy_file_range() syscall in cifs_file_copychunk_range().
Firstly, the invalidation of the destination range is handled incorrectly:
We shouldn't just invalidate the whole file as dirty data in the file may
get lost and we can't just call truncate_inode_pages_range() to invalidate
the destination range as that will erase parts of a partial folio at each
end whilst invalidating and discarding all the folios in the middle. We
need to force all the folios covering the range to be reloaded, but we
mustn't lose dirty data in them that's not in the destination range.
Further, we shouldn't simply round out the range to PAGE_SIZE at each end
as cifs should move to support multipage folios.
Secondly, there's an issue whereby a write may have extended the file
locally, but not have been written back yet. This can leaves the local
idea of the EOF at a later point than the server's EOF. If a copy request
is issued, this will fail on the server with STATUS_INVALID_VIEW_SIZE
(which gets translated to -EIO locally) if the copy source extends past the
server's EOF.
Fix this by:
(0) Flush the source region (already done). The flush does nothing and
the EOF isn't moved if the source region has no dirty data.
(1) Move the EOF to the end of the source region if it isn't already at
least at this point. If we can't do this, for instance if the server
doesn't support it, just flush the entire source file.
(2) Find the folio (if present) at each end of the range, flushing it and
increasing the region-to-be-invalidated to cover those in their
entirety.
(3) Fully discard all the folios covering the range as we want them to be
reloaded.
(4) Then perform the copy.
Thirdly, set i_size after doing the copychunk_range operation as this value
may be used by various things internally. stat() hides the issue because
setting ->time to 0 causes cifs_getatr() to revalidate the attributes.
These were causing the generic/075 xfstest to fail.
Fixes: 620d8745b35d ("Introduce cifs_copy_file_range()")
Cc: stable@vger.kernel.org
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Paulo Alcantara <pc@manguebit.com>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Rohith Surabattula <rohiths.msft@gmail.com>
cc: Matthew Wilcox <willy@infradead.org>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: linux-mm@kvack.org
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The dfi binding does not specify interrupt names, with the interrupts
just specifying channels 0-x. So drop the unspecified property.
Fixes: 5a6976b1040a ("arm64: dts: rockchip: Add DFI to rk3588s")
Reported-by: Jagan Teki <jagan@edgeble.ai>
Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Link: https://lore.kernel.org/r/20231201134859.322491-1-heiko@sntech.de
|
|
Charlie Jenkins <charlie@rivosinc.com> says:
Module loading did not account for multiple threads concurrently loading
modules. This patch fixes that issue. There is also a small patch to fix
the type of a __le16 variable.
* b4-shazam-merge:
riscv: Correct type casting in module loading
riscv: Safely remove entries from relocation list
Link: https://lore.kernel.org/r/20231127-module_linking_freeing-v4-0-a2ca1d7027d0@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Use __le16 with le16_to_cpu.
Fixes: 8fd6c5142395 ("riscv: Add remaining module relocations")
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Tested-by: Samuel Holland <samuel.holland@sifive.com>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20231127-module_linking_freeing-v4-2-a2ca1d7027d0@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Use the safe versions of list and hlist iteration to safely remove
entries from the module relocation lists. To allow mutliple threads to
load modules concurrently, move relocation list pointers onto the stack
rather than using global variables.
Fixes: 8fd6c5142395 ("riscv: Add remaining module relocations")
Reported-by: Ron Economos <re@w6rz.net>
Closes: https://lore.kernel.org/linux-riscv/444de86a-7e7c-4de7-5d1d-c1c40eefa4ba@w6rz.net
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20231127-module_linking_freeing-v4-1-a2ca1d7027d0@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
If controller reset occurs when allocating namespace, both
nvme_reset_work and nvme_scan_work will hang, as shown below.
Test Scripts:
for ((t=1;t<=128;t++))
do
nsid=`nvme create-ns /dev/nvme1 -s 14537724 -c 14537724 -f 0 -m 0 \
-d 0 | awk -F: '{print($NF);}'`
nvme attach-ns /dev/nvme1 -n $nsid -c 0
done
nvme reset /dev/nvme1
We will find that both nvme_reset_work and nvme_scan_work hung:
INFO: task kworker/u249:4:17848 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this
message.
task:kworker/u249:4 state:D stack: 0 pid:17848 ppid: 2
flags:0x00000028
Workqueue: nvme-reset-wq nvme_reset_work [nvme]
Call trace:
__switch_to+0xb4/0xfc
__schedule+0x22c/0x670
schedule+0x4c/0xd0
blk_mq_freeze_queue_wait+0x84/0xc0
nvme_wait_freeze+0x40/0x64 [nvme_core]
nvme_reset_work+0x1c0/0x5cc [nvme]
process_one_work+0x1d8/0x4b0
worker_thread+0x230/0x440
kthread+0x114/0x120
INFO: task kworker/u249:3:22404 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this
message.
task:kworker/u249:3 state:D stack: 0 pid:22404 ppid: 2
flags:0x00000028
Workqueue: nvme-wq nvme_scan_work [nvme_core]
Call trace:
__switch_to+0xb4/0xfc
__schedule+0x22c/0x670
schedule+0x4c/0xd0
rwsem_down_write_slowpath+0x32c/0x98c
down_write+0x70/0x80
nvme_alloc_ns+0x1ac/0x38c [nvme_core]
nvme_validate_or_alloc_ns+0xbc/0x150 [nvme_core]
nvme_scan_ns_list+0xe8/0x2e4 [nvme_core]
nvme_scan_work+0x60/0x500 [nvme_core]
process_one_work+0x1d8/0x4b0
worker_thread+0x260/0x440
kthread+0x114/0x120
INFO: task nvme:28428 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this
message.
task:nvme state:D stack: 0 pid:28428 ppid: 27119
flags:0x00000000
Call trace:
__switch_to+0xb4/0xfc
__schedule+0x22c/0x670
schedule+0x4c/0xd0
schedule_timeout+0x160/0x194
do_wait_for_common+0xac/0x1d0
__wait_for_common+0x78/0x100
wait_for_completion+0x24/0x30
__flush_work.isra.0+0x74/0x90
flush_work+0x14/0x20
nvme_reset_ctrl_sync+0x50/0x74 [nvme_core]
nvme_dev_ioctl+0x1b0/0x250 [nvme_core]
__arm64_sys_ioctl+0xa8/0xf0
el0_svc_common+0x88/0x234
do_el0_svc+0x7c/0x90
el0_svc+0x1c/0x30
el0_sync_handler+0xa8/0xb0
el0_sync+0x148/0x180
The reason for the hang is that nvme_reset_work occurs while nvme_scan_work
is still running. nvme_scan_work may add new ns into ctrl->namespaces
list after nvme_reset_work frozen all ns->q in ctrl->namespaces list.
The newly added ns is not frozen, so nvme_wait_freeze will wait forever.
Unfortunately, ctrl->namespaces_rwsem is held by nvme_reset_work, so
nvme_scan_work will also wait forever. Now we are deadlocked!
PROCESS1 PROCESS2
============== ==============
nvme_scan_work
... nvme_reset_work
nvme_validate_or_alloc_ns nvme_dev_disable
nvme_alloc_ns nvme_start_freeze
down_write ...
nvme_ns_add_to_ctrl_list ...
up_write nvme_wait_freeze
... down_read
nvme_alloc_ns blk_mq_freeze_queue_wait
down_write
Fix by marking the ctrl with say NVME_CTRL_FROZEN flag set in
nvme_start_freeze and cleared in nvme_unfreeze. Then the scan can check
it before adding the new namespace (under the namespaces_rwsem).
Signed-off-by: Bitao Hu <yaoma@linux.alibaba.com>
Reviewed-by: Guixin Liu <kanie@linux.alibaba.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
This patch fixes the smatch warning, "nvmet_ns_ana_grpid_store() warn:
potential spectre issue 'nvmet_ana_group_enabled' [w] (local cap)"
Prevent the contents of kernel memory from being leaked to user space
via speculative execution by using array_index_nospec.
Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Currently two similar config options NVME_HOST_AUTH and NVME_TARGET_AUTH
have almost same descriptions. It is confusing to choose them in
menuconfig. Improve the descriptions to distinguish them.
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
This can be an expensive call on some kernel configs. Move it to the end
after checking the cheaper ways to determine if the command is allowed.
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
A different CPU may be setting the ctrl->state value, so ensure proper
barriers to prevent optimizing to a stale state. Normally it isn't a
problem to observe the wrong state as it is merely advisory to take a
quicker path during initialization and error recovery, but seeing an old
state can report unexpected ENETRESET errors when a reset request was in
fact successful.
Reported-by: Minh Hoang <mh2022@meta.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Hannes Reinecke <hare@suse.de>
|
|
The controller state is typically written by another CPU, so reading it
should ensure no optimizations are taken. This is a repeated pattern in
the driver, so start with adding a convenience function that returns the
controller state with READ_ONCE().
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Limit the speaker digital gains to 0dB so that the users will not damage them.
Currently there is a limit in UCM, but this does not stop the user form
changing the digital gains from command line. So limit this in driver
which makes the speakers more safer without active speaker protection in
place.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231204124736.132185-3-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Volume can have ranges that start with negative values, ex: -84dB to
+40dB. Apply correct range check in snd_soc_limit_volume before setting
the platform_max. Without this patch, for example setting a 0dB limit on
a volume range of -84dB to +40dB would fail.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231204124736.132185-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This device needs ALWAYS_POLL quirk, otherwise it keeps reconnecting
indefinitely. It is a handbrake for sim racing detected as joystick.
Reported and tested by GitHub user N0th1ngM4tt3rs.
Link: https://github.com/sriemer/fix-linux-mouse issue 22
Signed-off-by: Sebastian Parschauer <s.parschauer@gmx.de>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Users have reported problems with recent Lenovo laptops that contain
an IDEA5002 I2C HID device. Reports include fans turning on and
running even at idle and spurious wakeups from suspend.
Presumably in the Windows ecosystem there is an application that
uses the HID device. Maybe that puts it into a lower power state so
it doesn't cause spurious events.
This device doesn't serve any functional purpose in Linux as nothing
interacts with it so blacklist it from being probed. This will
prevent the GPIO driver from setting up the GPIO and the spurious
interrupts and wake events will not occur.
Cc: stable@vger.kernel.org # 6.1
Reported-and-tested-by: Marcus Aram <marcus+oss@oxar.nl>
Reported-and-tested-by: Mark Herbert <mark.herbert42@gmail.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2812
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
If a pin isn't marked as a wake source processing any interrupts is
just going to destroy battery life. The APU may wake up from a hardware
sleep state to process the interrupt but not return control to the OS.
Mask interrupt for all non-wake source pins at suspend. They'll be
re-enabled at resume.
Reported-and-tested-by: Marcus Aram <marcus+oss@oxar.nl>
Reported-and-tested-by: Mark Herbert <mark.herbert42@gmail.com>
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2812
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20231203032431.30277-3-mario.limonciello@amd.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Lenovo M90 Gen5 is equipped with ALC897, and it needs
ALC897_FIXUP_HEADSET_MIC_PIN quirk to make its headset mic work.
Signed-off-by: Bin Li <bin.li@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20231204100450.642783-1-bin.li@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
XPS 9530 has 2 tweeters and 2 subwoofers powered by CS35L41 amplifier, SPI
connected. For subwoofers to work, it requires both to enable amplifier
support, and to enable output to subwoofers via 0x17 quirk (similalry to
XPS 9510/9520).
Signed-off-by: Aleksandrs Vinarskis <alex.vinarskis@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20231203233006.100558-1-alex.vinarskis@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
These values mirror those of the Pioneer DJM-250MK2 as the channel layout
appears identical based on my observations. This duplication could be removed in
later contributions if desired.
Signed-off-by: Sarah Grant <s@srd.tw>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20231201181654.5058-1-s@srd.tw
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
In mcp3564_config() fix the hardware identification logic
based on the hardware ID registers. Second part of the code was
disabled by an logic error.
Fix a typo related to the "MODULE_DESCRIPTION".
Fixes: 33ec3e5fc1ea (iio: adc: adding support for MCP3564 ADC)
Signed-off-by: Marius Cristea <marius.cristea@microchip.com>
Link: https://lore.kernel.org/r/20231129135619.63475-1-marius.cristea@microchip.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The current implementation uses the AND (&&) operator to check if the
value to write for IIO_CHAN_INFO_CALIBBIAS and IIO_CHAN_INFO_CALIBSCALE
is within the valid ranges.
The evaluated values are the lower and upper limits of the ranges,
so this operation always evaluates to false.
The OR (||) operator must be used instead.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reviewed-by: Marius Cristea <marius.cristea@microchip.com>
Link: https://lore.kernel.org/r/20231201-mcp3564_range_checks-v1-1-68f4436e22b0@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
When typec_altmode_put_partner is called by a plug altmode upon release,
the port altmode the plug belongs to will not remove its reference to the
plug. The check to see if the altmode being released evaluates against the
released altmode's partner instead of the calling altmode itself, so change
adev in typec_altmode_put_partner to properly refer to the altmode being
released.
typec_altmode_set_partner is not run for port altmodes, so also add a check
in typec_altmode_release to prevent typec_altmode_put_partner() calls on
port altmode release.
Fixes: 8a37d87d72f0 ("usb: typec: Bus type for alternate modes")
Cc: stable@vger.kernel.org
Signed-off-by: RD Babiera <rdbabiera@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20231129192349.1773623-2-rdbabiera@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The KOBJ_CHANGE uevent is sent before gadget unbind is actually
executed, resulting in inaccurate uevent emitted at incorrect timing
(the uevent would have USB_UDC_DRIVER variable set while it would
soon be removed).
Move the KOBJ_CHANGE uevent to the end of the unbind function so that
uevent is sent only after the change has been made.
Fixes: 2ccea03a8f7e ("usb: gadget: introduce UDC Class")
Cc: stable@vger.kernel.org
Signed-off-by: Roy Luo <royluo@google.com>
Link: https://lore.kernel.org/r/20231128221756.2591158-1-royluo@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
devm_hwmon_device_register_with_groups() returns an error pointer upon
failure. Check its return value for errors.
Compile-tested only.
Fixes: 1a218d312e65 ("platform/mellanox: mlxbf-pmc: Add Mellanox BlueField PMC driver")
Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Suggested-by: Vadim Pasternak <vadimp@nvidia.com>
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20231201055447.2356001-1-chentao@kylinos.cn
[ij: split the change into two]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
devm_kasprintf() returns a pointer to dynamically allocated memory
which can be NULL upon failure.
Compile-tested only.
Fixes: 1a218d312e65 ("platform/mellanox: mlxbf-pmc: Add Mellanox BlueField PMC driver")
Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Suggested-by: Vadim Pasternak <vadimp@nvidia.com>
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20231201055447.2356001-1-chentao@kylinos.cn
[ij: split the change into two]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
When wm_adsp_buffer_read() fails, we should free buf->regions.
Otherwise, the callers of wm_adsp_buffer_populate() will
directly free buf on failure, which makes buf->regions a leaked
memory.
Fixes: a792af69b08f ("ASoC: wm_adsp: Refactor compress stream initialisation")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231204074158.12026-1-dinghao.liu@zju.edu.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Change the default MIC detection impedance threshold to 200ohm
to support low mic DC impedance headset.
Signed-off-by: David Rau <David.Rau.opensource@dm.renesas.com>
Link: https://lore.kernel.org/r/20231201042933.26392-1-David.Rau.opensource@dm.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This commit adds support for Huawei MateBook D16 2021
with Ryzen 4600H in driver acp3x-es83xx.
Signed-off-by: Marian Postevca <posteuca@mutex.one>
Link: https://lore.kernel.org/r/20231202223001.8025-1-posteuca@mutex.one
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The secure boot state of the BlueField SoC is represented by two bits:
0 = production state
1 = secure boot enabled
2 = non-secure (secure boot disabled)
3 = RMA state
There is also a single bit to indicate whether production keys or
development keys are being used when secure boot is enabled.
This single bit (specified by MLXBF_BOOTCTL_SB_DEV_MASK) only has
meaning if secure boot state equals 1 (secure boot enabled).
The secure boot states are as follows:
- “GA secured” is when secure boot is enabled with official production keys.
- “Secured (development)” is when secure boot is enabled with development keys.
Without this fix “GA Secured” is displayed on development cards which is
misleading. This patch updates the logic in "lifecycle_state_show()" to
handle the case where the SoC is configured for secure boot and is using
development keys.
Fixes: 79e29cb8fbc5c ("platform/mellanox: Add bootctl driver for Mellanox BlueField Soc")
Reviewed-by: Khalil Blaiech <kblaiech@nvidia.com>
Signed-off-by: David Thompson <davthompson@nvidia.com>
Link: https://lore.kernel.org/r/20231130183515.17214-1-davthompson@nvidia.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Since commit 0ec7731655de ("regmap: Ensure range selector registers
are updated after cache sync") opening pcm512x based soundcards fail
with EINVAL and dmesg shows sync cache and pm_runtime_get errors:
[ 228.794676] pcm512x 1-004c: Failed to sync cache: -22
[ 228.794740] pcm512x 1-004c: ASoC: error at snd_soc_pcm_component_pm_runtime_get on pcm512x.1-004c: -22
This is caused by the cache check result leaking out into the
regcache_sync return value.
Fix this by making the check local-only, as the comment above the
regcache_read call states a non-zero return value means there's
nothing to do so the return value should not be altered.
Fixes: 0ec7731655de ("regmap: Ensure range selector registers are updated after cache sync")
Cc: stable@vger.kernel.org
Signed-off-by: Matthias Reichl <hias@horus.com>
Link: https://lore.kernel.org/r/20231203222216.96547-1-hias@horus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
indexing mode
The multiplier is already promoted to unsigned long, however the
frequency calculations done when using level indexing mode doesn't
use the multiplier computed. It instead hardcodes the multiplier
value of 1000 at all the usage sites.
Clean that up by assigning the multiplier value of 1000 when using
the perf level indexing mode and update the frequency calculations to
use the multiplier instead. It should fix the possible frequency
truncation for all the values greater than or equal to 4GHz on 64-bit
machines.
Fixes: 31c7c1397a33 ("firmware: arm_scmi: Add v3.2 perf level indexing mode support")
Reported-by: Sibi Sankar <quic_sibis@quicinc.com>
Closes: https://lore.kernel.org/all/20231129065748.19871-3-quic_sibis@quicinc.com/
Cc: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20231130204343.503076-2-sudeep.holla@arm.com
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Fix the possible frequency truncation for all values equal to or greater
4GHz on 64bit machines by updating the multiplier 'mult_factor' to
'unsigned long' type. It is also possible that the multiplier itself can
be greater than or equal to 2^32. So we need to also fix the equation
computing the value of the multiplier.
Fixes: a9e3fbfaa0ff ("firmware: arm_scmi: add initial support for performance protocol")
Reported-by: Sibi Sankar <quic_sibis@quicinc.com>
Closes: https://lore.kernel.org/all/20231129065748.19871-3-quic_sibis@quicinc.com/
Cc: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20231130204343.503076-1-sudeep.holla@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Delay loops in r8152 should break out if RTL8152_INACCESSIBLE is set
so that they don't delay too long if the device becomes
inaccessible. Add the break to the loop in r8153_aldps_en().
Fixes: 4214cc550bf9 ("r8152: check if disabling ALDPS is finished")
Reviewed-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Delay loops in r8152 should break out if RTL8152_INACCESSIBLE is set
so that they don't delay too long if the device becomes
inaccessible. Add the break to the loop in r8153_pre_firmware_1().
Fixes: 9370f2d05a2a ("r8152: support request_firmware for RTL8153")
Reviewed-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Delay loops in r8152 should break out if RTL8152_INACCESSIBLE is set
so that they don't delay too long if the device becomes
inaccessible. Add the break to the loop in
r8156b_wait_loading_flash().
Fixes: 195aae321c82 ("r8152: support new chips")
Reviewed-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Previous commits added checks for RTL8152_INACCESSIBLE in the loops in
the driver. There are still a few more that keep tripping the driver
up in error cases and make things take longer than they should. Add
those in.
All the loops that are part of this commit existed in some form or
another since the r8152 driver was first introduced, though
RTL8152_INACCESSIBLE was known as RTL8152_UNPLUG before commit
715f67f33af4 ("r8152: Rename RTL8152_UNPLUG to RTL8152_INACCESSIBLE")
Fixes: ac718b69301c ("net/usb: new driver for RTL8152")
Reviewed-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As of commit d9962b0d4202 ("r8152: Block future register access if
register access fails") there is a race condition that can happen
between the USB device reset thread and napi_enable() (not) getting
called during rtl8152_open(). Specifically:
* While rtl8152_open() is running we get a register access error
that's _not_ -ENODEV and queue up a USB reset.
* rtl8152_open() exits before calling napi_enable() due to any reason
(including usb_submit_urb() returning an error).
In that case:
* Since the USB reset is perform in a separate thread asynchronously,
it can run at anytime USB device lock is not held - even before
rtl8152_open() has exited with an error and caused __dev_open() to
clear the __LINK_STATE_START bit.
* The rtl8152_pre_reset() will notice that the netif_running() returns
true (since __LINK_STATE_START wasn't cleared) so it won't exit
early.
* rtl8152_pre_reset() will then hang in napi_disable() because
napi_enable() was never called.
We can fix the race by making sure that the r8152 reset routines don't
run at the same time as we're opening the device. Specifically we need
the reset routines in their entirety rely on the return value of
netif_running(). The only way to reliably depend on that is for them
to hold the rntl_lock() mutex for the duration of reset.
Grabbing the rntl_lock() mutex for the duration of reset seems like a
long time, but reset is not expected to be common and the rtnl_lock()
mutex is already held for long durations since the core grabs it
around the open/close calls.
Fixes: d9962b0d4202 ("r8152: Block future register access if register access fails")
Reviewed-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
According to Amlogic custom kernels ADC of axg SoC family has
vref_select and requires this setting to work nominally and thus
needs a separate config.
Fixes: 90c6241860bf ("iio: adc: meson: init voltage control bits")
Signed-off-by: George Stark <gnstark@salutedevices.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231127235558.71995-1-gnstark@salutedevices.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
