| Age | Commit message (Collapse) | Author |
|---|
|
Add an adminq command to read NIC's hardware clock. The driver
allocates dma memory and passes that dma memory address to the device.
The device then writes the clock to the given address.
Signed-off-by: Jeff Rogers <jefrogers@google.com>
Signed-off-by: John Fraker <jfraker@google.com>
Signed-off-by: Ziwei Xiao <ziweixiao@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
Link: https://patch.msgid.link/20250614000754.164827-3-hramamurthy@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add the device option and negotiation with the device for clock
synchronization with the nic. This option is necessary before the driver
will advertise support for hardware timestamping or other related
features.
Signed-off-by: Jeff Rogers <jefrogers@google.com>
Signed-off-by: John Fraker <jfraker@google.com>
Signed-off-by: Ziwei Xiao <ziweixiao@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
Link: https://patch.msgid.link/20250614000754.164827-2-hramamurthy@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
To collaborate with hardware servicing events, upon receiving the special
EQE notification from the HW channel, remove the devices on this bus.
Then, after a waiting period based on the device specs, rescan the parent
bus to recover the devices.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1749834034-18498-1-git-send-email-haiyangz@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Breno Leitao says:
====================
netpoll: Untangle netconsole and netpoll
Initially netpoll and netconsole were created together, and some
functions are in the wrong file. Seperate netconsole-only functions
in netconsole, avoiding exports.
1. Expose netpoll logging macros in the public header to enable consistent
log formatting across netpoll consumers.
2. Relocate netconsole-specific functions from netpoll to the netconsole
module where they are actually used, reducing unnecessary coupling.
3. Remove unnecessary function exports
4. Rename netpoll parsing functions in netconsole to better reflect their
specific usage.
5. Create a test to check that cmdline works fine. This was in my todo
list since [1], this was a good time to add it here to make sure this
patchset doesn't regress.
PS: The code was split in a way that it is easy to review. When copying
the functions from netpoll to netconsole, I do not change than other
than adding `static`. This will make checkpatch unhappy, but, further
patches will address the issues. It is done this way to make it easy for
reviewers.
Link: https://lore.kernel.org/netdev/Z36TlACdNMwFD7wv@dev-ushankar.dev.purestorage.com/ [1]
v2: https://lore.kernel.org/20250611-rework-v2-0-ab1d92b458ca@debian.org
v1: https://lore.kernel.org/20250610-rework-v1-0-7cfde283f246@debian.org
====================
Link: https://patch.msgid.link/20250613-rework-v3-0-0752bf2e6912@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a new selftest to verify netconsole module loading with command
line arguments. This test exercises the init_netconsole() path and
validates proper parsing of the netconsole= parameter format.
The test:
- Loads netconsole module with cmdline configuration instead of
dynamic reconfiguration
- Validates message transmission through the configured target
- Adds helper functions for cmdline string generation and module
validation
This complements existing netconsole selftests by covering the
module initialization code path that processes boot-time parameters.
This test is useful to test issues like the one described in [1].
Link: https://lore.kernel.org/netdev/Z36TlACdNMwFD7wv@dev-ushankar.dev.purestorage.com/ [1]
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250613-rework-v3-8-0752bf2e6912@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Extract the network device and namespace cleanup logic from the
cleanup() function into a new do_cleanup() helper in lib_netcons.sh.
The do_cleanup() function only unconfigure the network and
printk, while cleanup() cleans the netconsole targets plus the network
and printk.
This refactoring let this code to be reused in cases netconsole dynamic
is not being used, as in the upcoming patch.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250613-rework-v3-7-0752bf2e6912@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Split assignment from conditional checks and use preferred null pointer
check style (!delim instead of == NULL) in netconsole_parser_cmdline().
This improves code readability and follows kernel coding style
conventions.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250613-rework-v3-6-0752bf2e6912@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Rename netpoll_parse_options() to netconsole_parser_cmdline() and
netpoll_print_options() to netconsole_print_banner() to better
describe what these functions actually do within the netconsole
context.
Also fix minor code style issues including variable declaration
ordering and spacing.
These functions are specific to netconsole functionality rather
than general netpoll operations, so the new names better reflect
their actual purpose.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250613-rework-v3-5-0752bf2e6912@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move netpoll_print_options() from net/core/netpoll.c to
drivers/net/netconsole.c and make it static. This function is only used
by netconsole, so there's no need to export it or keep it in the public
netpoll API.
This reduces the netpoll API surface and improves code locality
by keeping netconsole-specific functionality within the netconsole
driver.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250613-rework-v3-4-0752bf2e6912@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move netpoll_parse_ip_addr() and netpoll_parse_options() from the generic
netpoll module to the netconsole module where they are actually used.
These functions were originally placed in netpoll but are only consumed by
netconsole. This refactoring improves code organization by:
- Removing unnecessary exported symbols from netpoll
- Making netpoll_parse_options() static (no longer needs global visibility)
- Reducing coupling between netpoll and netconsole modules
The functions remain functionally identical - this is purely a code
reorganization to better reflect their actual usage patterns. Here are
the changes:
1) Move both functions from netpoll to netconsole
2) Add static to netpoll_parse_options()
3) Removed the EXPORT_SYMBOL()
PS: This diff does not change the function format, so, it is easy to
review, but, checkpatch will not be happy. A follow-up patch will
address the current issues reported by checkpatch.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250613-rework-v3-3-0752bf2e6912@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move np_info(), np_err(), and np_notice() macros from internal
implementation to the public netpoll header file to make them
available for use by netpoll consumers.
These logging macros provide consistent formatting for netpoll-related
messages by automatically prefixing log output with the netpoll instance
name.
The goal is to use the exact same format that is being displayed today,
instead of creating something netconsole-specific.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250613-rework-v3-2-0752bf2e6912@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since commit 97714695ef90 ("net: netconsole: Defer netpoll cleanup to
avoid lock release during list traversal"), netconsole no longer uses
__netpoll_cleanup(). With no remaining users, remove this function
from the exported netpoll API.
The function remains available internally within netpoll for use by
netpoll_cleanup().
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250613-rework-v3-1-0752bf2e6912@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Replace pr_err() with pr_err_ratelimited() in ptp_clock_settime() to
prevent log flooding when the physical clock is free running, which
happens on some of my hosts. This ensures error messages are
rate-limited and improves kernel log readability.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250613-ptp-v1-1-ee44260ce9e2@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add one test to check that the kernel rejects a negative perturb timer.
Add a second test checking that the kernel rejects
a too big perturb timer.
All test results:
1..2
ok 1 cdc1 - Check that a negative perturb timer is rejected
ok 2 a9f0 - Check that a too big perturb timer is rejected
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com>
Link: https://patch.msgid.link/20250613064136.3911944-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Heiner Kallweit says:
====================
net: phy: make phy_package a separate module
Only a handful of PHY drivers needs the PHY package functionality,
therefore make it a separate module which is built only if needed.
====================
Link: https://patch.msgid.link/eec346a4-e903-48af-8150-0191932a7a0b@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Only a handful of PHY drivers needs the PHY package functionality,
therefore build the module only if needed.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/42c05496-61b2-4b09-b853-3d99b3dfe95c@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Make phy_package a separate module, so that this code is only loaded
if needed.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/66bb4cce-b6a3-421e-9a7b-5d4a0c75290e@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move both functions to phy_package.c, so that phy_core.c no longer
has a dependency on phy_package.c (phy_package_address).
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/8956fa53-3eda-4079-8203-a8fddcc17bf3@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
It appears that the GMAC_ANE_ADV and GMAC_ANE_LPA registers are only
available for TBI and RTBI PHY interfaces. In commit 482b3c3ba757
("net: stmmac: Drop TBI/RTBI PCS flags") support for these was dropped,
and thus it no longer makes sense to access these registers.
Remove the *_get_adv_lp() functions, and the now redundant struct
rgmii_adv and STMMAC_PCS_* definitions.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/E1uPkbT-004EyG-OQ@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Several of the tcp_ao events are only called when CONFIG_TCP_AO is
defined. As each event can take up to 5K regardless if they are used or
not, it's best not to define them when they are not used. Add #ifdef
around these events when they are not used.
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250612094616.4222daf0@batman.local.home
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
pldmfw calls crc32 code and depends on it being enabled, else
there is a link error as follows. So PLDMFW should select CRC32.
lib/pldmfw/pldmfw.o: In function `pldmfw_flash_image':
pldmfw.c:(.text+0x70f): undefined reference to `crc32_le_base'
This problem was introduced by commit b8265621f488 ("Add pldmfw library
for PLDM firmware update").
It manifests as of commit d69ea414c9b4 ("ice: implement device flash
update via devlink").
And is more likely to occur as of commit 9ad19171b6d6 ("lib/crc: remove
unnecessary prompt for CONFIG_CRC32 and drop 'default y'").
Found by chance while exercising builds based on tinyconfig.
Fixes: b8265621f488 ("Add pldmfw library for PLDM firmware update")
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250613-pldmfw-crc32-v1-1-f3fad109eee6@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
For some reason arm64's Poly1305 code got changed to ignore the padbit
argument. As a result, the output is incorrect when the message length
is not a multiple of 16 (which is not reached with the standard
ChaCha20Poly1305, but bcachefs could reach this). Fix this.
Fixes: a59e5468a921 ("crypto: arm64/poly1305 - Add block-only interface")
Reported-by: Kent Overstreet <kent.overstreet@linux.dev>
Tested-by: Kent Overstreet <kent.overstreet@linux.dev>
Link: https://lore.kernel.org/r/20250616010654.367302-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
On 64-bit systems, writing/reading one u64 is faster than two u32s even
when they're are adjacent in a struct. The compilers won't guarantee
they will combine those; I observed both successful and unsuccessful
attempts with both GCC and Clang, and it's not easy to say what it
depends on.
There's a few places in libeth_xdp winning up to several percent from
combined access (both performance and object code size, especially
when unrolling). Add __LIBETH_WORD_ACCESS and use it there on LE.
Drivers are free to optimize HW-specific callbacks under the same
definition.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
XSkFQ refill is pretty generic across the drivers minus FQ descriptor
filling and can easily be unified with one inline callback.
XSk wakeup is usually not, but here, instead of commonly used
"SW interrupts", I picked firing an IPI. In most tests, it showed better
performance; it also provides better control for userspace on which CPU
will handle the xmit, as SW interrupts honor IRQ affinity no matter
which core produces XSk xmit descs (while XDPSQs are associated 1:1
with cores having the same ID).
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add XSk counterparts for preparing XSk &libeth_xdp_buff (adding head and
frags), running the program, and handling the verdict, inc. XDP_PASS.
Shortcuts in comparison with regular Rx: frags and all verdicts except
XDP_REDIRECT are under unlikely() and out of line; no checks for XDP
program presence as it's always true for XSk.
Suggested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> # optimizations
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Reuse core sending functions to send XSk xmit frames.
Both metadata and no metadata pools/driver are supported. libeth_xdp
also provides generic XSk metadata ops, currently with the checksum
offload only and for cases when HW doesn't require supplying L3/L4
checksum offsets. Drivers are free to pass their own ops.
&libeth_xdp_tx_bulk is not used here as it would be redundant;
pool->tx_descs are accessed directly.
Fake "libeth_xsktmo" is needed to hide implementation details from the
drivers when they want to use the generic ops: the original struct is
defined in the same file where dev->xsk_tx_metadata_ops gets set to
avoid duplication of slowpath; at the same time; XSk xmit functions
use local "fast" copy to inline XMO callbacks.
Tx descriptor filling loop is unrolled by 8.
Suggested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> # optimizations
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add Xsk counterparts for XDP_TX buffer sending and completion.
The same base structures and functions used from the libeth_xdp core,
with adjustments to that XSk Rx always operates on &xdp_buff_xsk for
both head and frags. And unlike regular Rx, here unlikely() are used
for frags, as the header split gives no benefits for XSk Rx, at
least for now.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
End the XDP section by adding helpers to setup XDP features, flipping
.ndo_xdp_xmit() support at runtime (in case when it's not always on),
and calculating the queue clean/refill threshold.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Defining driver-specific functions to pass to libeth_xdp functions can
induce boilerplates and/or look a bit cryptic with all those layers of
indirection. On the other hand, this indirection is needed to allow
compilers to uninline big functions even when passed to __always_inline
helpers (too much inlining also hurts performance in some cases), plus
to reuse some XDP helpers in XSk code.
Add macros to quickly build them, with the detailed kdoc. They take
names of the actual callbacks for filling a Tx descriptor and other
purely HW-specific things and wrap them appropriately.
LIBETH_XDP_DEFINE_{BEGIN,END}() is needed for GCC 8+ unfortunately to
let the drivers control which functions will be static and which global
without hitting `-Wold-style-declaration`.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Running a prog and handling the verdicts, up to napi_gro_receive()
is also pretty generic code not really differing between vendors
(except for Tx descriptor filling and Rx descriptor parsing).
Define a couple inlines to do that. The inline callbacks a driver
needs to pass is mentioned above: Tx descriptor filling for XDP_TX,
populating skb with the descriptor data for XDP_PASS, finalizing
XDPSQs after the polling loop for XDP_TX (kicking the HW to start
sending).
The populate callback passes only &libeth_xdp_buff assuming buff::desc
pointer is enough, plus you can always get the corresponding Rx queue
structure via container_of(buff::rxq). If not, a driver can extend
the buff with more fields directly on the stack without touching
libeth_xdp definitions.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add convenience helpers to build an &xdp_buff. This means: general
initialization before the NAPI loop, adding head, adding frags etc.
libeth_xdp_process_buff() is the same what everybody have in their
drivers:
dma_sync_for_cpu();
if (!frag) {
add_head();
prefetch();
} else {
add_frag();
}
Note that I don't use net_prefetch(), sticking to the original
prefetch(). In none of my tests prefetching 128 bytes yielded better
perf than 64 bytes. That might differ if the headers are huge enough,
but then additional tunneling etc. overhead takes place, you either
way won't win a lot.
&libeth_xdp_stash is for cases when you exit the polling loop without
finishing building the buff. If that happens, you need to store the
buffer in the queue structure until the next loop and then restore it.
It makes no sense to place a whole full &xdp_buff there. Define a
minimal structure, which would store only the fields essential to
restore it.
I was able to pack it into 16 bytes, which is only 8 bytes bigger
than `struct sk_buff *skb` on x64.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
When XDP Tx queues are not interrupt-driven but use lazy cleaning,
i.e. only when there are less than `threshold` free descriptors left,
we also need cleanup timers to avoid &xdp_buff and &xdp_frame stall
for too long, especially with Page Pool (it warns every about inflight
pages every 60 second).
Let's say we sent 256 frames and don't need to send more, but we clean
only when the number of pending items >= 384. In that case, those 256
will stall until 128 more are sent. For this, add simple helpers to
run a timer which will clean the queue regardless, after 1 second of
the last send.
The timer is triggered when finalizing the queue. As long as there is
regular active traffic, the timer doesn't fire.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Unfortunately, it's not always possible to allocate
max(num_rxqs, nr_cpu_ids) even on hi-end NICs.
To mitigate this, add simple locking helpers to libeth_xdp.
As long as XDPSQs are not shared, the whole functionality is gated
behind a static lock. Otherwise, each bulk flush locks the queue for
the time of cleaning and filling the descriptors.
As long as this particular queue is not used by more than 1 CPU,
the impact is minimal (runtime check for boolean twice per 16+
descriptors).
Suggested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> # static key
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Similarly to libeth_tx_complete(), add libeth_xdp_complete_tx() to
handle XDP_TX and xmit buffers. Both use bulk return under the hood.
Also add out of line libeth_tx_complete_any() which handles both
regular and XDP frames (if libeth_xdp is loaded), for example,
to call on queue destroy, where we don't need inlining but
convenience.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add helpers for implementing .ndo_xdp_xmit().
Same as for XDP_TX, accumulate up to 16 DMA-mapped frames on the stack,
then flush. If DMA mapping is failed for some reason, don't try mapping
further frames, but still flush what was already prepared.
DMA address of a head frame is stored in its headroom, assuming it
has enough of it for an 8 (or 4) byte value.
In addition to @prep and @xmit driver callbacks in XDP_TX, xmit also
needs @finalize to kick the XDPSQ after filling.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Start adding XDP-specific code to libeth, namely handling XDP_TX buffers
(only sending).
The idea is that we accumulate up to 16 buffers on the stack, then,
if either the limit is reached or the polling is finished, flush them
at once with only one XDPSQ cleaning (if needed). The main sending
function will be aware of the sending budget and already have all the
info to send the buffers, so it can't fail.
Drivers need to provide 2 inline callbacks to the main sending function:
for cleaning an XDPSQ and for filling descriptors; the library code
takes care of the rest.
Note that unlike the generic code, multi-buffer support is not wrapped
here with unlikely() to not hurt header split setups.
&libeth_xdp_buff is a simple extension over &xdp_buff which has a direct
pointer to the corresponding Rx descriptor (and, luckily, precisely 1 CL
size and 16-byte alignment on x86_64).
Suggested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> # xmit logic
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Expand libeth's Page Pool functionality by adding native XDP support.
This means picking the appropriate headroom and DMA direction.
Also, register all the created &page_pools as XDP memory models.
A driver then can call xdp_rxq_info_attach_page_pool() when registering
its RxQ info.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Back when the libeth Rx core was initially written, devmem was a draft
and netmem_ref didn't exist in the mainline. Now that it's here, make
libeth MP-agnostic before introducing any new code or any new library
users.
When it's known that the created PP/FQ is for header buffers, use faster
"unsafe" underscored netmem <--> virt accessors as netmem_is_net_iov()
is always false in that case, but consumes some cycles (bit test +
true branch).
Reviewed-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Change EXPORT_SYMBOL_NS_GPL(x, "LIBETH") to EXPORT_SYMBOL_GPL(x) +
DEFAULT_SYMBOL_NAMESPACE "LIBETH" to make the code more compact.
Also, explicitly include <linux/export.h> to satisfy new
requirements from scripts/misc-check.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Dave Hansen:
"This is a pretty scattered set of fixes. The majority of them are
further fixups around the recent ITS mitigations.
The rest don't really have a coherent story:
- Some flavors of Xen PV guests don't support large pages, but the
set_memory.c code assumes all CPUs support them.
Avoid problems with a quick CPU feature check.
- The TDX code has some wrappers to help retry calls to the TDX
module. They use function pointers to assembly functions and the
compiler usually generates direct CALLs. But some new compilers,
plus -Os turned them in to indirect CALLs and the assembly code was
not annotated for indirect calls.
Force inlining of the helper to fix it up.
- Last, a FRED issue showed up when single-stepping. It's fine when
using an external debugger, but was getting stuck returning from a
SIGTRAP handler otherwise.
Clear the FRED 'swevent' bit to ensure that forward progress is
made"
* tag 'x86_urgent_for_6.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Revert "mm/execmem: Unify early execmem_cache behaviour"
x86/its: explicitly manage permissions for ITS pages
x86/its: move its_pages array to struct mod_arch_specific
x86/Kconfig: only enable ROX cache in execmem when STRICT_MODULE_RWX is set
x86/mm/pat: don't collapse pages without PSE set
x86/virt/tdx: Avoid indirect calls to TDX assembly functions
selftests/x86: Add a test to detect infinite SIGTRAP handler loop
x86/fred/signal: Prevent immediate repeat of single step trap on return from SIGTRAP handler
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Madhavan Srinivasan:
- Fix to handle VDSO32 with pcrel
- Couple of dts fixes in microwatt and mpc8315erdb
- Fix to handle PE bridge reconfiguration in VFIO EEH recovery path
- Fix ioctl macros related to struct termio
Thanks to Christophe Leroy, Ganesh Goudar, J. Neuschäfer, Justin M.
Forbes, Michael Ellerman, Narayana Murty N, Tulio Magno, and Vaibhav
Jain
* tag 'powerpc-6.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc: Fix struct termio related ioctl macros
powerpc: dts: mpc8315erdb: Add GPIO controller node
powerpc/microwatt: Fix model property in device tree
powerpc/eeh: Fix missing PE bridge reconfiguration during VFIO EEH recovery
powerpc/vdso: Fix build of VDSO32 with pcrel
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Fix a regression in overlayfs caused by reworking the lookup_one*()
set of helpers
- Make sure that the name of the dentry is printed in overlayfs'
mkdir() helper
- Add missing iocb values to TRACE_IOCB_STRINGS define
- Unlock the superblock during iterate_supers_type(). This was an
accidental internal api change
- Drop a misleading assert in file_seek_cur_needs_f_lock() helper
- Never refuse to return PIDFD_GET_INGO when parent pid is zero
That can trivially happen in container scenarios where the parent
process might be located in an ancestor pid namespace
- Don't revalidate in try_lookup_noperm() as that causes regression for
filesystems such as cifs
- Fix simple_xattr_list() and reset the err variable after
security_inode_listsecurity() got called so as not to confuse
userspace about the length of the xattr
* tag 'vfs-6.16-rc3.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: drop assert in file_seek_cur_needs_f_lock
fs: unlock the superblock during iterate_supers_type
ovl: fix debug print in case of mkdir error
VFS: change try_lookup_noperm() to skip revalidation
fs: add missing values to TRACE_IOCB_STRINGS
fs/xattr.c: fix simple_xattr_list()
ovl: fix regression caused by lookup helpers API changes
pidfs: never refuse ppid == 0 in PIDFD_GET_INFO
|
|
The fault enabled bits were being mistankenly enabled twice in case the FW
property is present. Remove one of the writes.
Fixes: cbc29538dbf7 ("hwmon: Add driver for LTC4282")
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20250611-fix-ltc4282-repetead-write-v1-1-fe46edd08cf1@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Passing a pointer to an unaligned integer as a function argument is
undefined behavior:
drivers/hwmon/occ/common.c:492:27: warning: taking address of packed member 'accumulator' of class or structure 'power_sensor_2' may result in an unaligned pointer value [-Waddress-of-packed-member]
492 | val = occ_get_powr_avg(&power->accumulator,
| ^~~~~~~~~~~~~~~~~~
drivers/hwmon/occ/common.c:493:13: warning: taking address of packed member 'update_tag' of class or structure 'power_sensor_2' may result in an unaligned pointer value [-Waddress-of-packed-member]
493 | &power->update_tag);
| ^~~~~~~~~~~~~~~~~
Move the get_unaligned() calls out of the function and pass these
through argument registers instead.
Fixes: c10e753d43eb ("hwmon (occ): Add sensor types and versions")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250610092553.2641094-1-arnd@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
clang produces an output with excessive stack usage when building the
occ_setup_sensor_attrs() function, apparently the result of having
a lot of struct literals and building with the -fno-strict-overflow
option that leads clang to skip some optimization in case the 'attr'
pointer overruns:
drivers/hwmon/occ/common.c:775:12: error: stack frame size (1392) exceeds limit (1280) in 'occ_setup_sensor_attrs' [-Werror,-Wframe-larger-than]
Replace the custom macros for initializing the attributes with a
simpler function call that does not run into this corner case.
Link: https://godbolt.org/z/Wf1Yx76a5
Fixes: 54076cb3b5ff ("hwmon (occ): Add sensor attributes and register hwmon device")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250610092315.2640039-1-arnd@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
In the fts_read() function, when handling hwmon_pwm_auto_channels_temp,
the code accesses the shared variable data->fan_source[channel] twice
without holding any locks. It is first checked against
FTS_FAN_SOURCE_INVALID, and if the check passes, it is read again
when used as an argument to the BIT() macro.
This creates a Time-of-Check to Time-of-Use (TOCTOU) race condition.
Another thread executing fts_update_device() can modify the value of
data->fan_source[channel] between the check and its use. If the value
is changed to FTS_FAN_SOURCE_INVALID (0xff) during this window, the
BIT() macro will be called with a large shift value (BIT(255)).
A bit shift by a value greater than or equal to the type width is
undefined behavior and can lead to a crash or incorrect values being
returned to userspace.
Fix this by reading data->fan_source[channel] into a local variable
once, eliminating the race condition. Additionally, add a bounds check
to ensure the value is less than BITS_PER_LONG before passing it to
the BIT() macro, making the code more robust against undefined behavior.
This possible bug was found by an experimental static analysis tool
developed by our team.
Fixes: 1c5759d8ce05 ("hwmon: (ftsteutates) Replace fanX_source with pwmX_auto_channels_temp")
Cc: stable@vger.kernel.org
Signed-off-by: Gui-Dong Han <hanguidong02@gmail.com>
Link: https://lore.kernel.org/r/20250606071640.501262-1-hanguidong02@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add an entry to remap my Red Hat address.
Link: https://lore.kernel.org/r/20250614092054.161658-1-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
The assert in function file_seek_cur_needs_f_lock() can be triggered very
easily because there are many users of vfs_llseek() (such as overlayfs)
that do their custom locking around llseek instead of relying on
fdget_pos(). Just drop the overzealous assertion.
Fixes: da06e3c51794 ("fs: don't needlessly acquire f_lock")
Suggested-by: Jan Kara <jack@suse.cz>
Suggested-by: Mateusz Guzik <mjguzik@gmail.com>
Signed-off-by: Luis Henriques <luis@igalia.com>
Link: https://lore.kernel.org/20250613101111.17716-1-luis@igalia.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
After commit 6f110a5e4f99 ("Disable SLUB_TINY for build testing"), which
causes CONFIG_KASAN to be enabled in allmodconfig again, arm64
allmodconfig builds with clang-17 and older show an instance of
-Wframe-larger-than (which breaks the build with CONFIG_WERROR=y):
lib/crypto/curve25519-hacl64.c:757:6: error: stack frame size (2336) exceeds limit (2048) in 'curve25519_generic' [-Werror,-Wframe-larger-than]
757 | void curve25519_generic(u8 mypublic[CURVE25519_KEY_SIZE],
| ^
When KASAN is disabled, the stack usage is roughly quartered:
lib/crypto/curve25519-hacl64.c:757:6: error: stack frame size (608) exceeds limit (128) in 'curve25519_generic' [-Werror,-Wframe-larger-than]
757 | void curve25519_generic(u8 mypublic[CURVE25519_KEY_SIZE],
| ^
Using '-Rpass-analysis=stack-frame-layout' shows the following variables
and many, many 8-byte spills when KASAN is enabled:
Offset: [SP-144], Type: Variable, Align: 8, Size: 40
Offset: [SP-464], Type: Variable, Align: 8, Size: 320
Offset: [SP-784], Type: Variable, Align: 8, Size: 320
Offset: [SP-864], Type: Variable, Align: 32, Size: 80
Offset: [SP-896], Type: Variable, Align: 32, Size: 32
Offset: [SP-1016], Type: Variable, Align: 8, Size: 120
When KASAN is disabled, there are still spills but not at many and the
variables list is smaller:
Offset: [SP-192], Type: Variable, Align: 32, Size: 80
Offset: [SP-224], Type: Variable, Align: 32, Size: 32
Offset: [SP-344], Type: Variable, Align: 8, Size: 120
Disable KASAN for this file when using clang-17 or older to avoid
blowing out the stack, clearing up the warning.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: "Jason A. Donenfeld" <Jason@zx2c4.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250609-curve25519-hacl64-disable-kasan-clang-v1-1-08ea0ac5ccff@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
Annotate various keys, ivs, and other byte arrays with __nonstring so
that static initializers will not complain about truncating the trailing
NUL byte under GCC 15 with -Wunterminated-string-initialization enabled.
Silences many warnings like:
../lib/crypto/aesgcm.c:642:27: warning: initializer-string for array of 'unsigned char' truncates NUL terminator but destination lacks 'nonstring' attribute (13 chars into 12 available) [-Wunterminated-string-initialization]
642 | .iv = "\xca\xfe\xba\xbe\xfa\xce\xdb\xad"
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://lore.kernel.org/r/20250529173113.work.760-kees@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
