| Age | Commit message (Collapse) | Author |
|---|
|
Modifying the flags of an IP addr object needs to be protected against
eg. concurrent removal of the same object from the IP table.
Fixes: 5f78e29ceebf ("qeth: optimize IP handling in rx_mode callback")
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When takeover is switched off, current code clears the 'TAKEOVER' flag on
all IPs. But the flag is also used for RXIP addresses, and those should
not be affected by the takeover mode.
Fix the behaviour by consistenly applying takover logic to NORMAL
addresses only.
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Just as for an explicit enable/disable, toggling the takeover mode also
requires that the IP addresses get updated. Otherwise all IPs that were
added to the table before the mode-toggle, get registered with the old
settings.
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 9de52a755cfb6da5 ("arm64: fpsimd: Fix failure to restore FPSIMD
state after signals") fixed an issue reported in our FPSIMD signal
restore code but inadvertently introduced another issue which tends to
manifest as random SEGVs in userspace.
The problem is that when we copy the struct fpsimd_state from the kernel
stack (populated from the signal frame) into the struct held in the
current thread_struct, we blindly copy uninitialised stack into the
"cpu" field, which means that context-switching of the FP registers is
no longer reliable.
This patch fixes the problem by copying only the user_fpsimd member of
struct fpsimd_state. We should really rework the function prototypes
to take struct user_fpsimd_state * instead, but let's just get this
fixed for now.
Cc: Dave Martin <Dave.Martin@arm.com>
Fixes: 9de52a755cfb6da5 ("arm64: fpsimd: Fix failure to restore FPSIMD state after signals")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
Simon Wunderlich says:
====================
Here are some batman-adv bugfixes:
- Initialize the fragment headers, by Sven Eckelmann
- Fix a NULL check in BATMAN V, by Sven Eckelmann
- Fix kernel doc for the time_setup() change, by Sven Eckelmann
- Use the right lock in BATMAN IV OGM Update, by Sven Eckelmann
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Using PGDIR_SHIFT to identify espfix64 addresses on 5-level systems
was wrong, and it resulted in panics due to unhandled double faults.
Use P4D_SHIFT instead, which is correct on 4-level and 5-level
machines.
This fixes a panic when running x86 selftests on 5-level machines.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: David Laight <David.Laight@aculab.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Fixes: 1d33b219563f ("x86/espfix: Add support for 5-level paging")
Link: http://lkml.kernel.org/r/24c898b4f44fdf8c22d93703850fb384ef87cfdc.1513035461.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Learning is currently enabled for ports which are OVS slaves -
even though OVS doesn't need this indication.
Since we're not associating a fid with the port, HW would continuously
notify driver of learned [& aged] MACs which would be logged as errors.
Fixes: 2b94e58df58c ("mlxsw: spectrum: Allow ports to work under OVS master")
Signed-off-by: Yuval Mintz <yuvalm@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Daniel Wagner reported a crash on the BeagleBone Black SoC.
This is a single CPU architecture, and does not have a functional
arch_send_call_function_single_ipi() implementation which can crash
the kernel if that is called.
As it only has one CPU, it shouldn't be called, but if the kernel is
compiled for SMP, the push/pull RT scheduling logic now calls it for
irq_work if the one CPU is overloaded, it can use that function to call
itself and crash the kernel.
Ideally, we should disable the SCHED_FEAT(RT_PUSH_IPI) if the system
only has a single CPU. But SCHED_FEAT is a constant if sched debugging
is turned off. Another fix can also be used, and this should also help
with normal SMP machines. That is, do not initiate the pull code if
there's only one RT overloaded CPU, and that CPU happens to be the
current CPU that is scheduling in a lower priority task.
Even on a system with many CPUs, if there's many RT tasks waiting to
run on a single CPU, and that CPU schedules in another RT task of lower
priority, it will initiate the PULL logic in case there's a higher
priority RT task on another CPU that is waiting to run. But if there is
no other CPU with waiting RT tasks, it will initiate the RT pull logic
on itself (as it still has RT tasks waiting to run). This is a wasted
effort.
Not only does this help with SMP code where the current CPU is the only
one with RT overloaded tasks, it should also solve the issue that
Daniel encountered, because it will prevent the PULL logic from
executing, as there's only one CPU on the system, and the check added
here will cause it to exit the RT pull code.
Reported-by: Daniel Wagner <wagi@monom.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-rt-users <linux-rt-users@vger.kernel.org>
Cc: stable@vger.kernel.org
Fixes: 4bdced5c9 ("sched/rt: Simplify the IPI based RT balancing logic")
Link: http://lkml.kernel.org/r/20171202130454.4cbbfe8d@vmware.local.home
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Fixes a NULL pointer dereference.
Reported-by: Arnav Dawn <a.dawn@samsung.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Some devices with IDs matching the "stripe" quirk don't actually have
this quirk, and don't have an MDTS value. When MDTS is not set, the
driver sets the max sectors to UINT_MAX, which is not a power of 2,
hitting a BUG_ON from blk_queue_chunk_sectors. This patch skips setting
chunk sectors for such devices.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
During IO complete path, bio_integrity_advance() is often called, and
blk_get_integrity() is called in this function. But in
blk_integrity_unregister, the buffer pointed by queue->integrity
is cleared, and blk_integrity->profile becomes NULL, then blk_get_integrity
returns NULL, and causes kernel oops[1] finally.
This patch fixes this issue by calling blk_integrity_unregister() after
blk_cleanup_queue().
[1] kernel oops log
[ 122.068007] BUG: unable to handle kernel NULL pointer dereference at 000000000000000a
[ 122.076760] IP: bio_integrity_advance+0x3d/0xf0
[ 122.081815] PGD 0 P4D 0
[ 122.084641] Oops: 0000 [#1] SMP
[ 122.088142] Modules linked in: sunrpc ipmi_ssif intel_rapl vfat fat x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm irqbypass mei_me ipmi_si crct10dif_pclmul crc32_pclmul sg mei ghash_clmulni_intel mxm_wmi ipmi_devintf iTCO_wdt intel_cstate intel_uncore pcspkr intel_rapl_perf iTCO_vendor_support dcdbas ipmi_msghandler lpc_ich acpi_power_meter shpchp wmi dm_multipath ip_tables xfs libcrc32c sd_mod mgag200 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm crc32c_intel ahci nvme tg3 libahci nvme_core i2c_core libata ptp megaraid_sas pps_core dm_mirror dm_region_hash dm_log dm_mod
[ 122.149577] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.14.0-11.el7a.x86_64 #1
[ 122.157635] Hardware name: Dell Inc. PowerEdge R730xd/072T6D, BIOS 2.5.5 08/16/2017
[ 122.166179] task: ffff8802ff1e8000 task.stack: ffffc90000130000
[ 122.172785] RIP: 0010:bio_integrity_advance+0x3d/0xf0
[ 122.178419] RSP: 0018:ffff88047fc03d70 EFLAGS: 00010006
[ 122.184248] RAX: ffff880473b08000 RBX: ffff880458c71a80 RCX: ffff880473b08248
[ 122.192209] RDX: 0000000000000000 RSI: 000000000000003c RDI: ffffc900038d7ba0
[ 122.200171] RBP: ffff88047fc03d78 R08: 0000000000000001 R09: ffffffffa01a78b5
[ 122.208132] R10: ffff88047fc1eda0 R11: ffff880458c71ad0 R12: 0000000000007800
[ 122.216094] R13: 0000000000000000 R14: 0000000000007800 R15: ffff880473a39b40
[ 122.224056] FS: 0000000000000000(0000) GS:ffff88047fc00000(0000) knlGS:0000000000000000
[ 122.233083] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 122.239494] CR2: 000000000000000a CR3: 0000000001c09002 CR4: 00000000001606e0
[ 122.247455] Call Trace:
[ 122.250183] <IRQ>
[ 122.252429] bio_advance+0x28/0xf0
[ 122.256217] blk_update_request+0xa1/0x310
[ 122.260778] blk_mq_end_request+0x1e/0x70
[ 122.265256] nvme_complete_rq+0x1c/0xd0 [nvme_core]
[ 122.270699] nvme_pci_complete_rq+0x85/0x130 [nvme]
[ 122.276140] __blk_mq_complete_request+0x8d/0x140
[ 122.281387] blk_mq_complete_request+0x16/0x20
[ 122.286345] nvme_process_cq+0xdd/0x1c0 [nvme]
[ 122.291301] nvme_irq+0x23/0x50 [nvme]
[ 122.295485] __handle_irq_event_percpu+0x3c/0x190
[ 122.300725] handle_irq_event_percpu+0x32/0x80
[ 122.305683] handle_irq_event+0x3b/0x60
[ 122.309964] handle_edge_irq+0x8f/0x190
[ 122.314247] handle_irq+0xab/0x120
[ 122.318043] do_IRQ+0x48/0xd0
[ 122.321355] common_interrupt+0x9d/0x9d
[ 122.325625] </IRQ>
[ 122.327967] RIP: 0010:cpuidle_enter_state+0xe9/0x280
[ 122.333504] RSP: 0018:ffffc90000133e68 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff35
[ 122.341952] RAX: ffff88047fc1b900 RBX: ffff88047fc24400 RCX: 000000000000001f
[ 122.349913] RDX: 0000000000000000 RSI: fffffcf2e6007295 RDI: 0000000000000000
[ 122.357874] RBP: ffffc90000133ea0 R08: 000000000000062e R09: 0000000000000253
[ 122.365836] R10: 0000000000000225 R11: 0000000000000018 R12: 0000000000000002
[ 122.373797] R13: 0000000000000001 R14: ffff88047fc24400 R15: 0000001c6bd1d263
[ 122.381762] ? cpuidle_enter_state+0xc5/0x280
[ 122.386623] cpuidle_enter+0x17/0x20
[ 122.390611] call_cpuidle+0x23/0x40
[ 122.394501] do_idle+0x17e/0x1f0
[ 122.398101] cpu_startup_entry+0x73/0x80
[ 122.402478] start_secondary+0x178/0x1c0
[ 122.406854] secondary_startup_64+0xa5/0xa5
[ 122.411520] Code: 48 8b 5f 68 48 8b 47 08 31 d2 4c 8b 5b 48 48 8b 80 d0 03 00 00 48 83 b8 48 02 00 00 00 48 8d 88 48 02 00 00 48 0f 45 d1 c1 ee 09 <0f> b6 4a 0a 0f b6 52 09 89 f0 48 01 73 08 83 e9 09 d3 e8 0f af
[ 122.432604] RIP: bio_integrity_advance+0x3d/0xf0 RSP: ffff88047fc03d70
[ 122.439888] CR2: 000000000000000a
Reported-by: Zhang Yi <yizhan@redhat.com>
Tested-by: Zhang Yi <yizhan@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
There are two put references in the failure case of initial
create_association. The first put actually frees the controller, thus the
second put references freed memory.
Remove the unnecessary 2nd put.
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Similar to 7c084289795b ("rbd: set discard_alignment to zero"), NVMe
devices are currently incorrectly initialised with the block queue
discard_alignment set to the NVMe stream alignment.
As per Documentation/ABI/testing/sysfs-block:
The discard_alignment parameter indicates how many bytes the beginning
of the device is offset from the internal allocation unit's natural
alignment.
Correcting the discard_alignment parameter to zero has no effect on how
discard requests are propagated through the block layer - @alignment in
__blkdev_issue_discard() remains zero. However, it does fix other
consumers, such as LIO's Block Limits VPD response.
Signed-off-by: David Disseldorp <ddiss@suse.de>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
In netif_receive_generic_xdp(), it is necessary to linearize all
nonlinear skb. However, in current implementation, skb with
troom <= 0 are not linearized. This patch fixes this by calling
skb_linearize() for all nonlinear skb.
Fixes: de8f3a83b0a0 ("bpf: add meta pointer for direct access")
Signed-off-by: Song Liu <songliubraving@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Two kernel headers got modified recently, which are used by tooling as well:
tools/include/uapi/linux/kvm.h
arch/x86/include/asm/cpufeatures.h
None of those changes have an effect on tooling, so do a plain copy.
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
kernel's latest version
This fixes the following warning:
warning: objtool: x86 instruction decoder differs from kernel
Note that there are cleanups queued up for v4.16 that will make this
warning more informative and will make the syncing easier as well.
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Update x86-opcode-map.txt based on the October 2017 Intel SDM publication.
Fix INVPID to INVVPID.
Add UD0 and UD1 instruction opcodes.
Also sync the objtool and perf tooling copies of this file.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <masami.hiramatsu@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/aac062d7-c0f6-96e3-5c92-ed299e2bd3da@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
My previous attempt to fix a couple of bugs in __restore_processor_context():
5b06bbcfc2c6 ("x86/power: Fix some ordering bugs in __restore_processor_context()")
... introduced yet another bug, breaking suspend-resume.
Rather than trying to come up with a minimal fix, let's try to clean it up
for real. This patch fixes quite a few things:
- The old code saved a nonsensical subset of segment registers.
The only registers that need to be saved are those that contain
userspace state or those that can't be trivially restored without
percpu access working. (On x86_32, we can restore percpu access
by writing __KERNEL_PERCPU to %fs. On x86_64, it's easier to
save and restore the kernel's GSBASE.) With this patch, we
restore hardcoded values to the kernel state where applicable and
explicitly restore the user state after fixing all the descriptor
tables.
- We used to use an unholy mix of inline asm and C helpers for
segment register access. Let's get rid of the inline asm.
This fixes the reported s2ram hangs and make the code all around
more logical.
Analyzed-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reported-by: Pavel Machek <pavel@ucw.cz>
Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Tested-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bpetkov@suse.de>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Zhang Rui <rui.zhang@intel.com>
Fixes: 5b06bbcfc2c6 ("x86/power: Fix some ordering bugs in __restore_processor_context()")
Link: http://lkml.kernel.org/r/398ee68e5c0f766425a7b746becfc810840770ff.1513286253.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
x86_64 restores system call MSRs in fix_processor_context(), and
x86_32 restored them along with segment registers. The 64-bit
variant makes more sense, so move the 32-bit code to match the
64-bit code.
No side effects are expected to runtime behavior.
Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bpetkov@suse.de>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Zhang Rui <rui.zhang@intel.com>
Link: http://lkml.kernel.org/r/65158f8d7ee64dd6bbc6c1c83b3b34aaa854e3ae.1513286253.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
x86_64's saved_context nonsensically used separate idt_limit and
idt_base fields and then cast &idt_limit to struct desc_ptr *.
This was correct (with -fno-strict-aliasing), but it's confusing,
served no purpose, and required #ifdeffery. Simplify this by
using struct desc_ptr directly.
No change in functionality.
Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bpetkov@suse.de>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Zhang Rui <rui.zhang@intel.com>
Link: http://lkml.kernel.org/r/967909ce38d341b01d45eff53e278e2728a3a93a.1513286253.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
When USB is disabled, we get a link error for this driver
because of the added OTG support
drivers/phy/renesas/phy-rcar-gen3-usb2.o: In function `rcar_gen3_phy_usb2_probe':
phy-rcar-gen3-usb2.c:(.text+0x250): undefined reference to `of_usb_get_dr_mode_by_phy'
Other phy drivers select USB_COMMON for this, so let's do the same
here.
Fixes: 7e0540f41332 ("phy: rcar-gen3-usb2: check dr_mode for otg mode")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
|
|
Add pm_runtime_disable in err case to make the pm_runtime_enable/disable
is invoked balanced.
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
|
|
The platform_get_irq_byname() function returns negative if an error occurs.
zero or positive number on success. platform_get_irq_byname() error
checking for zero is not correct.
Fixes: 6d6ce40f63af ("phy: cpcap-usb: Add CPCAP PMIC USB support")
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
|
|
Fix child-node lookups during probe, which ended up searching the whole
device tree depth-first starting at the parents rather than just
matching on their children.
To make things worse, some parent nodes could end up being being
prematurely freed (by tegra_xusb_pad_register()) as
of_find_node_by_name() drops a reference to its first argument.
Fixes: 53d2a715c240 ("phy: Add Tegra XUSB pad controller support")
Cc: stable <stable@vger.kernel.org> # 4.7
Cc: Thierry Reding <treding@nvidia.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
|
|
timer_create() specifies via sigevent->sigev_notify the signal delivery for
the new timer. The valid modes are SIGEV_NONE, SIGEV_SIGNAL, SIGEV_THREAD
and (SIGEV_SIGNAL | SIGEV_THREAD_ID).
The sanity check in good_sigevent() is only checking the valid combination
for the SIGEV_THREAD_ID bit, i.e. SIGEV_SIGNAL, but if SIGEV_THREAD_ID is
not set it accepts any random value.
This has no real effects on the posix timer and signal delivery code, but
it affects show_timer() which handles the output of /proc/$PID/timers. That
function uses a string array to pretty print sigev_notify. The access to
that array has no bound checks, so random sigev_notify cause access beyond
the array bounds.
Add proper checks for the valid notify modes and remove the SIGEV_THREAD_ID
masking from various code pathes as SIGEV_NONE can never be set in
combination with SIGEV_THREAD_ID.
Reported-by: Eric Biggers <ebiggers3@gmail.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Reported-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: stable@vger.kernel.org
|
|
Reported by syzkaller:
WARNING: CPU: 0 PID: 27962 at arch/x86/kvm/emulate.c:5631 x86_emulate_insn+0x557/0x15f0 [kvm]
Modules linked in: kvm_intel kvm [last unloaded: kvm]
CPU: 0 PID: 27962 Comm: syz-executor Tainted: G B W 4.15.0-rc2-next-20171208+ #32
Hardware name: Intel Corporation S1200SP/S1200SP, BIOS S1200SP.86B.01.03.0006.040720161253 04/07/2016
RIP: 0010:x86_emulate_insn+0x557/0x15f0 [kvm]
RSP: 0018:ffff8807234476d0 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffff88072d0237a0 RCX: ffffffffa0065c4d
RDX: 1ffff100e5a046f9 RSI: 0000000000000003 RDI: ffff88072d0237c8
RBP: ffff880723447728 R08: ffff88072d020000 R09: ffffffffa008d240
R10: 0000000000000002 R11: ffffed00e7d87db3 R12: ffff88072d0237c8
R13: ffff88072d023870 R14: ffff88072d0238c2 R15: ffffffffa008d080
FS: 00007f8a68666700(0000) GS:ffff880802200000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000002009506c CR3: 000000071fec4005 CR4: 00000000003626f0
Call Trace:
x86_emulate_instruction+0x3bc/0xb70 [kvm]
? reexecute_instruction.part.162+0x130/0x130 [kvm]
vmx_handle_exit+0x46d/0x14f0 [kvm_intel]
? trace_event_raw_event_kvm_entry+0xe7/0x150 [kvm]
? handle_vmfunc+0x2f0/0x2f0 [kvm_intel]
? wait_lapic_expire+0x25/0x270 [kvm]
vcpu_enter_guest+0x720/0x1ef0 [kvm]
...
When CS.L is set, vcpu should run in the 64 bit paging mode.
Current kvm set_sregs function doesn't have such check when
userspace inputs sreg values. This will lead unexpected behavior.
This patch is to add checks for CS.L, EFER.LME, EFER.LMA and
CR4.PAE when get SREG inputs from userspace in order to avoid
unexpected behavior.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Jim Mattson <jmattson@google.com>
Signed-off-by: Tianyu Lan <tianyu.lan@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Sierra Wireless EM7565 devices use the QCSERIAL_SWI layout for their
serial ports
T: Bus=01 Lev=03 Prnt=29 Port=01 Cnt=02 Dev#= 31 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1199 ProdID=9091 Rev= 0.06
S: Manufacturer=Sierra Wireless, Incorporated
S: Product=Sierra Wireless EM7565 Qualcomm Snapdragon X16 LTE-A
S: SerialNumber=xxxxxxxx
C:* #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=qcserial
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=qcserial
E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=qcserial
E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 8 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E: Ad=86(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
but need sendsetup = true for the NMEA port to make it work properly.
Simplify the patch compared to v1 as suggested by Bjørn Mork by taking
advantage of the fact that existing devices work with sendsetup = true
too.
Use sendsetup = true for the NMEA interface of QCSERIAL_SWI and add
DEVICE_SWI entries for the EM7565 PID 0x9091 and the EM7565 QDL PID
0x9090.
Tests with several MC73xx/MC74xx/MC77xx devices have been performed in
order to verify backward compatibility.
Signed-off-by: Reinhard Speyerer <rspmn@arcor.de>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
This patch adds support for PID 0x1101 of Telit ME910.
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
Previously enabled clks are only disabled if clk_prepare_enable() fails.
However, there are other error paths were the previously enabled
clocks are not disabled.
To fix the problem, fsl_disable_clocks() now takes the number of clocks
that shall be disabled + unprepared. For existing calls were all clocks
were already successfully prepared + enabled, DMAMUX_NR is passed to
disable + unprepare all clocks.
In error paths were only some clocks were successfully prepared +
enabled the loop counter is passed, in order to disable + unprepare
all successfully prepared + enabled clocks.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Andreas Platschek <andreas.platschek@opentech.at>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
|
|
"FIB_CONTEXT_FLAG_TIMEDOUT" flag is set in aac_eh_abort to indicate
command timeout. Using the same flag in reset handler causes the command
to time out and the I/Os were dropped.
Define a new flag "FIB_CONTEXT_FLAG_EH_RESET" to make sure I/O is
properly handled in eh_reset handler.
[mkp: tweaked commit message]
Signed-off-by: Prasad B Munirathnam <prasad.munirathnam@microsemi.com>
Reviewed-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Use the type blist_flags_t for all variables that represent blacklist
flags. Additionally, suppress recently introduced sparse warnings
related to blacklist flags.
[mkp: fixed commit id]
Fixes: 5ebde4694e3b ("scsi: Use 'blist_flags_t' for scsi_devinfo flags")
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"This fixes an issue in two recent commits that may cause
pm_runtime_enable() to be called for too many times for some devices
during the "thaw" transition belonging to hibernation"
* tag 'pm-4.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM / sleep: Avoid excess pm_runtime_enable() calls in device_resume()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Various fix-ups:
- comment fixes
- build fix
- better memory alloction (don't use NR_CPUS)
- configuration fix
- build warning fix
- enhanced callback parameter (to simplify users of trace hooks)
- give up on stack tracing when RCU isn't watching (it's a lost
cause)"
* tag 'trace-v4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Have stack trace not record if RCU is not watching
tracing: Pass export pointer as argument to ->write()
ring-buffer: Remove unused function __rb_data_page_index()
tracing: make PREEMPTIRQ_EVENTS depend on TRACING
tracing: Allocate mask_str buffer dynamically
tracing: always define trace_{irq,preempt}_{enable_disable}
tracing: Fix code comments in trace.c
|
|
The stack tracer records a stack dump whenever it sees a stack usage that is
more than what it ever saw before. This can happen at any function that is
being traced. If it happens when the CPU is going idle (or other strange
locations), RCU may not be watching, and in this case, the recording of the
stack trace will trigger a warning. There's been lots of efforts to make
hacks to allow stack tracing to proceed even if RCU is not watching, but
this only causes more issues to appear. Simply do not trace a stack if RCU
is not watching. It probably isn't a bad stack anyway.
Acked-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
- add a pci_get_domain_bus_and_slot() stub for the CONFIG_PCI=n case to
avoid build breakage in the v4.16 merge window if a
pci_get_bus_and_slot() -> pci_get_domain_bus_and_slot() patch gets
merged before the PCI tree (Randy Dunlap)
- fix an AMD boot regression in the 64bit BAR support added in v4.15
(Christian König)
- fix an R-Car use-after-free that causes a crash if no PCIe card is
present (Geert Uytterhoeven)
* tag 'pci-v4.15-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI: rcar: Fix use-after-free in probe error path
x86/PCI: Only enable a 64bit BAR on single-socket AMD Family 15h
x86/PCI: Fix infinite loop in search for 64bit BAR placement
PCI: Add pci_get_domain_bus_and_slot() stub
|
|
Merge misc fixes from Andrew Morton:
"17 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
arch: define weak abort()
mm, oom_reaper: fix memory corruption
kernel: make groups_sort calling a responsibility group_info allocators
mm/frame_vector.c: release a semaphore in 'get_vaddr_frames()'
tools/slabinfo-gnuplot: force to use bash shell
kcov: fix comparison callback signature
mm/slab.c: do not hash pointers when debugging slab
mm/page_alloc.c: avoid excessive IRQ disabled times in free_unref_page_list()
mm/memory.c: mark wp_huge_pmd() inline to prevent build failure
scripts/faddr2line: fix CROSS_COMPILE unset error
Documentation/vm/zswap.txt: update with same-value filled page feature
exec: avoid gcc-8 warning for get_task_comm
autofs: fix careless error in recent commit
string.h: workaround for increased stack usage
mm/kmemleak.c: make cond_resched() rate-limiting more efficient
lib/rbtree,drm/mm: add rbtree_replace_node_cached()
include/linux/idr.h: add #include <linux/bug.h>
|
|
gcc toggle -fisolate-erroneous-paths-dereference (default at -O2
onwards) isolates faulty code paths such as null pointer access, divide
by zero etc. If gcc port doesnt implement __builtin_trap, an abort() is
generated which causes kernel link error.
In this case, gcc is generating abort due to 'divide by zero' in
lib/mpi/mpih-div.c.
Currently 'frv' and 'arc' are failing. Previously other arch was also
broken like m32r was fixed by commit d22e3d69ee1a ("m32r: fix build
failure").
Let's define this weak function which is common for all arch and fix the
problem permanently. We can even remove the arch specific 'abort' after
this is done.
Link: http://lkml.kernel.org/r/1513118956-8718-1-git-send-email-sudipm.mukherjee@gmail.com
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: Alexey Brodkin <Alexey.Brodkin@synopsys.com>
Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com>
Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
David Rientjes has reported the following memory corruption while the
oom reaper tries to unmap the victims address space
BUG: Bad page map in process oom_reaper pte:6353826300000000 pmd:00000000
addr:00007f50cab1d000 vm_flags:08100073 anon_vma:ffff9eea335603f0 mapping: (null) index:7f50cab1d
file: (null) fault: (null) mmap: (null) readpage: (null)
CPU: 2 PID: 1001 Comm: oom_reaper
Call Trace:
unmap_page_range+0x1068/0x1130
__oom_reap_task_mm+0xd5/0x16b
oom_reaper+0xff/0x14c
kthread+0xc1/0xe0
Tetsuo Handa has noticed that the synchronization inside exit_mmap is
insufficient. We only synchronize with the oom reaper if
tsk_is_oom_victim which is not true if the final __mmput is called from
a different context than the oom victim exit path. This can trivially
happen from context of any task which has grabbed mm reference (e.g. to
read /proc/<pid>/ file which requires mm etc.).
The race would look like this
oom_reaper oom_victim task
mmget_not_zero
do_exit
mmput
__oom_reap_task_mm mmput
__mmput
exit_mmap
remove_vma
unmap_page_range
Fix this issue by providing a new mm_is_oom_victim() helper which
operates on the mm struct rather than a task. Any context which
operates on a remote mm struct should use this helper in place of
tsk_is_oom_victim. The flag is set in mark_oom_victim and never cleared
so it is stable in the exit_mmap path.
Debugged by Tetsuo Handa.
Link: http://lkml.kernel.org/r/20171210095130.17110-1-mhocko@kernel.org
Fixes: 212925802454 ("mm: oom: let oom_reap_task and exit_mmap run concurrently")
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: David Rientjes <rientjes@google.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Andrea Argangeli <andrea@kernel.org>
Cc: <stable@vger.kernel.org> [4.14]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In testing, we found that nfsd threads may call set_groups in parallel
for the same entry cached in auth.unix.gid, racing in the call of
groups_sort, corrupting the groups for that entry and leading to
permission denials for the client.
This patch:
- Make groups_sort globally visible.
- Move the call to groups_sort to the modifiers of group_info
- Remove the call to groups_sort from set_groups
Link: http://lkml.kernel.org/r/20171211151420.18655-1-thiago.becker@gmail.com
Signed-off-by: Thiago Rafael Becker <thiago.becker@gmail.com>
Reviewed-by: Matthew Wilcox <mawilcox@microsoft.com>
Reviewed-by: NeilBrown <neilb@suse.com>
Acked-by: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
A semaphore is acquired before this check, so we must release it before
leaving.
Link: http://lkml.kernel.org/r/20171211211009.4971-1-christophe.jaillet@wanadoo.fr
Fixes: b7f0554a56f2 ("mm: fail get_vaddr_frames() for filesystem-dax mappings")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
On some linux distributions, the default link of sh is dash which
deoesn't support split array like "${var//,/ }"
It's better to force to use bash shell directly.
Link: http://lkml.kernel.org/r/20171208093751.GA175471@sofia
Signed-off-by: Liu Changcheng <changcheng.liu@intel.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Fix a silly copy-paste bug. We truncated u32 args to u16.
Link: http://lkml.kernel.org/r/20171207101134.107168-1-dvyukov@google.com
Fixes: ded97d2c2b2c ("kcov: support comparison operands collection")
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Cc: syzkaller@googlegroups.com
Cc: Alexander Potapenko <glider@google.com>
Cc: Vegard Nossum <vegard.nossum@oracle.com>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
If CONFIG_DEBUG_SLAB/CONFIG_DEBUG_SLAB_LEAK are enabled, the slab code
prints extra debug information when e.g. corruption is detected. This
includes pointers, which are not very useful when hashed.
Fix this by using %px to print unhashed pointers instead where it makes
sense, and by removing the printing of a last user pointer referring to
code.
[geert+renesas@glider.be: v2]
Link: http://lkml.kernel.org/r/1513179267-2509-1-git-send-email-geert+renesas@glider.be
Link: http://lkml.kernel.org/r/1512641861-5113-1-git-send-email-geert+renesas@glider.be
Fixes: ad67b74d2469d9b8 ("printk: hash addresses printed with %p")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Christoph Lameter <cl@linux.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: "Tobin C . Harding" <me@tobin.cc>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Since commit 9cca35d42eb6 ("mm, page_alloc: enable/disable IRQs once
when freeing a list of pages") we see excessive IRQ disabled times of up
to 25ms on an embedded ARM system (tracing overhead included).
This is due to graphics buffers being freed back to the system via
release_pages(). Graphics buffers can be huge, so it's not hard to hit
cases where the list of pages to free has 2048 entries. Disabling IRQs
while freeing all those pages is clearly not a good idea.
Introduce a batch limit, which allows IRQ servicing once every few
pages. The batch count is the same as used in other parts of the MM
subsystem when dealing with IRQ disabled regions.
Link: http://lkml.kernel.org/r/20171207170314.4419-1-l.stach@pengutronix.de
Fixes: 9cca35d42eb6 ("mm, page_alloc: enable/disable IRQs once when freeing a list of pages")
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
With gcc 4.1.2:
mm/memory.o: In function `wp_huge_pmd':
memory.c:(.text+0x9b4): undefined reference to `do_huge_pmd_wp_page'
Interestingly, wp_huge_pmd() is emitted in the assembler output, but
never called.
Apparently replacing the call to pmd_write() in __handle_mm_fault() by a
call to the more complex pmd_access_permitted() reduced the ability of
the compiler to remove unused code.
Fix this by marking wp_huge_pmd() inline, like was done in commit
91a90140f998 ("mm/memory.c: mark create_huge_pmd() inline to prevent
build failure") for a similar problem.
[akpm@linux-foundation.org: add comment]
Link: http://lkml.kernel.org/r/1512335500-10889-1-git-send-email-geert@linux-m68k.org
Fixes: c7da82b894e9eef6 ("mm: replace pmd_write with pmd_access_permitted in fault + gup paths")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
faddr2line hit var unbound error when CROSS_COMPILE isn't set since
nounset option is set in bash script.
Link: http://lkml.kernel.org/r/20171206013022.GA83929@sofia
Fixes: 95a879825419 ("scripts/faddr2line: extend usage on generic arch")
Signed-off-by: Liu Changcheng <changcheng.liu@intel.com>
Reported-by: Richard Weinberger <richard.weinberger@gmail.com>
Reviewed-by: Richard Weinberger <richard@nod.at>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: NeilBrown <neilb@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Update zswap document with details on same-value filled pages
identification feature. The usage of zswap.same_filled_pages_enabled
module parameter is explained.
Link: http://lkml.kernel.org/r/20171206114852epcms5p6973b02a9f455d5d3c765eafda0fe2631@epcms5p6
Signed-off-by: Srividya Desireddy <srividya.dr@samsung.com>
Acked-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
gcc-8 warns about using strncpy() with the source size as the limit:
fs/exec.c:1223:32: error: argument to 'sizeof' in 'strncpy' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess]
This is indeed slightly suspicious, as it protects us from source
arguments without NUL-termination, but does not guarantee that the
destination is terminated.
This keeps the strncpy() to ensure we have properly padded target
buffer, but ensures that we use the correct length, by passing the
actual length of the destination buffer as well as adding a build-time
check to ensure it is exactly TASK_COMM_LEN.
There are only 23 callsites which I all reviewed to ensure this is
currently the case. We could get away with doing only the check or
passing the right length, but it doesn't hurt to do both.
Link: http://lkml.kernel.org/r/20171205151724.1764896-1-arnd@arndb.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Suggested-by: Kees Cook <keescook@chromium.org>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Serge Hallyn <serge@hallyn.com>
Cc: James Morris <james.l.morris@oracle.com>
Cc: Aleksa Sarai <asarai@suse.de>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit ecc0c469f277 ("autofs: don't fail mount for transient error") was
meant to replace an 'if' with a 'switch', but instead added the 'switch'
leaving the case in place.
Link: http://lkml.kernel.org/r/87zi6wstmw.fsf@notabene.neil.brown.name
Fixes: ecc0c469f277 ("autofs: don't fail mount for transient error")
Reported-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: NeilBrown <neilb@suse.com>
Cc: Ian Kent <raven@themaw.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The hardened strlen() function causes rather large stack usage in at
least one file in the kernel, in particular when CONFIG_KASAN is
enabled:
drivers/media/usb/em28xx/em28xx-dvb.c: In function 'em28xx_dvb_init':
drivers/media/usb/em28xx/em28xx-dvb.c:2062:1: error: the frame size of 3256 bytes is larger than 204 bytes [-Werror=frame-larger-than=]
Analyzing this problem led to the discovery that gcc fails to merge the
stack slots for the i2c_board_info[] structures after we strlcpy() into
them, due to the 'noreturn' attribute on the source string length check.
I reported this as a gcc bug, but it is unlikely to get fixed for gcc-8,
since it is relatively easy to work around, and it gets triggered
rarely. An earlier workaround I did added an empty inline assembly
statement before the call to fortify_panic(), which works surprisingly
well, but is really ugly and unintuitive.
This is a new approach to the same problem, this time addressing it by
not calling the 'extern __real_strnlen()' function for string constants
where __builtin_strlen() is a compile-time constant and therefore known
to be safe.
We do this by checking if the last character in the string is a
compile-time constant '\0'. If it is, we can assume that strlen() of
the string is also constant.
As a side-effect, this should also improve the object code output for
any other call of strlen() on a string constant.
[akpm@linux-foundation.org: add comment]
Link: http://lkml.kernel.org/r/20171205215143.3085755-1-arnd@arndb.de
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=82365
Link: https://patchwork.kernel.org/patch/9980413/
Link: https://patchwork.kernel.org/patch/9974047/
Fixes: 6974f0c4555 ("include/linux/string.h: add the option of fortified string.h functions")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Daniel Micay <danielmicay@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Martin Wilck <mwilck@suse.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
