summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-10-02staging: greybus: light: check the correct value of delay_onRui Miguel Silva
When checking the value of delay_on to set the channel as active, it was checked the pointer and not the value, as it should be. Fixes: cc43368a3c ("greybus: lights: Control runtime pm suspend/resume on AP side") Signed-off-by: Rui Miguel Silva <rmfrfs@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-02staging: greybus: Add remaining audio files to maintained listMark Greer
Some Greybus Audio Device Class Protocol driver files are missing in the MAINTAINERS file even though they are maintained so add them. CC: Vaibhav Agarwal <vaibhav.sr@gmail.com> Signed-off-by: Mark Greer <mgreer@animalcreek.com> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-02staging: greybus: light: check delay_{on|off} before useRui Miguel Silva
Even though we trust leds core that the pointers should be valid, we are safer to check delay_{on|off} before use. Also, this avoid a smatch warning: drivers/staging/greybus/light.c:484 gb_blink_set() warn: variable dereferenced before check 'delay_on' (see line 476) Signed-off-by: Rui Miguel Silva <rmfrfs@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-02staging: greybus: light: fix attributes allocationRui Miguel Silva
Fix allocation of attributes with the correct size, this also fix smatch warning: drivers/staging/greybus/light.c:293 channel_attr_groups_set() warn: double check that we're allocating correct size: 8 vs 16 Signed-off-by: Rui Miguel Silva <rmfrfs@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-02staging: greybus: sdio: fix cmd_flags check for none responseRui Miguel Silva
When checking for command flags field if response is not available we really need to compare it with the right define and not bitwise AND it. smatch warn: drivers/staging/greybus/sdio.c:481 gb_sdio_command() warn: bitwise AND condition is false here Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Rui Miguel Silva <rmfrfs@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-02staging: add bcm2708 vchiq driverpopcornmix
Signed-off-by: popcornmix <popcornmix@gmail.com> vchiq: create_pagelist copes with vmalloc memory Signed-off-by: Daniel Stone <daniels@collabora.com> vchiq: fix the shim message release Signed-off-by: Daniel Stone <daniels@collabora.com> vchiq: export additional symbols Signed-off-by: Daniel Stone <daniels@collabora.com> VCHIQ: Make service closure fully synchronous (drv) This is one half of a two-part patch, the other half of which is to the vchiq_lib user library. With these patches, calls to vchiq_close_service and vchiq_remove_service won't return until any associated callbacks have been delivered to the callback thread. VCHIQ: Add per-service tracing The new service option VCHIQ_SERVICE_OPTION_TRACE is a boolean that toggles tracing for the specified service. This commit also introduces vchi_service_set_option and the associated option VCHI_SERVICE_OPTION_TRACE. vchiq: Make the synchronous-CLOSE logic more tolerant vchiq: Move logging control into debugfs vchiq: Take care of a corner case tickled by VCSM Closing a connection that isn't fully open requires care, since one side does not know the other side's port number. Code was present to handle the case where a CLOSE is sent immediately after an OPEN, i.e. before the OPENACK has been received, but this was incorrectly being used when an OPEN from a client using port 0 was rejected. (In the observed failure, the host was attempting to use the VCSM service, which isn't present in the 'cutdown' firmware. The failure was intermittent because sometimes the keepalive service would grab port 0.) This case can be distinguished because the client's remoteport will still be VCHIQ_PORT_FREE, and the srvstate will be OPENING. Either condition is sufficient to differentiate it from the special case described above. vchiq: Avoid high load when blocked and unkillable vchiq: Include SIGSTOP and SIGCONT in list of signals not-masked by vchiq to allow gdb to work vchiq_arm: Complete support for SYNCHRONOUS mode vchiq: Remove inline from suspend/resume vchiq: Allocation does not need to be atomic vchiq: Fix wrong condition check The log level is checked from within the log call. Remove the check in the call. Signed-off-by: Pranith Kumar <bobby.prani@gmail.com> BCM270x: Add vchiq device to platform file and Device Tree Prepare to turn the vchiq module into a driver. Signed-off-by: Noralf Trønnes <noralf@tronnes.org> bcm2708: vchiq: Add Device Tree support Turn vchiq into a driver and stop hardcoding resources. Use devm_* functions in probe path to simplify cleanup. A global variable is used to hold the register address. This is done to keep this patch as small as possible. Also make available on ARCH_BCM2835. Based on work by Lubomir Rintel. Signed-off-by: Noralf Trønnes <noralf@tronnes.org> vchiq: Change logging level for inbound data vchiq_arm: Two cacheing fixes 1) Make fragment size vary with cache line size Without this patch, non-cache-line-aligned transfers may corrupt (or be corrupted by) adjacent data structures. Both ARM and VC need to be updated to enable this feature. This is ensured by having the loader apply a new DT parameter - cache-line-size. The existence of this parameter guarantees that the kernel is capable, and the parameter will only be modified from the safe default if the loader is capable. 2) Flush/invalidate vmalloc'd memory, and invalidate after reads vchiq: fix NULL pointer dereference when closing driver The following code run as root will cause a null pointer dereference oops: int fd = open("/dev/vc-cma", O_RDONLY); if (fd < 0) err(1, "open failed"); (void)close(fd); [ 1704.877721] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 1704.877725] pgd = b899c000 [ 1704.877736] [00000000] *pgd=37fab831, *pte=00000000, *ppte=00000000 [ 1704.877748] Internal error: Oops: 817 [#1] PREEMPT SMP ARM [ 1704.877765] Modules linked in: evdev i2c_bcm2708 uio_pdrv_genirq uio [ 1704.877774] CPU: 2 PID: 3656 Comm: stress-ng-fstat Not tainted 3.19.1-12-generic-bcm2709 #12-Ubuntu [ 1704.877777] Hardware name: BCM2709 [ 1704.877783] task: b8ab9b00 ti: b7e68000 task.ti: b7e68000 [ 1704.877798] PC is at __down_interruptible+0x50/0xec [ 1704.877806] LR is at down_interruptible+0x5c/0x68 [ 1704.877813] pc : [<80630ee8>] lr : [<800704b0>] psr: 60080093 sp : b7e69e50 ip : b7e69e88 fp : b7e69e84 [ 1704.877817] r10: b88123c8 r9 : 00000010 r8 : 00000001 [ 1704.877822] r7 : b8ab9b00 r6 : 7fffffff r5 : 80a1cc34 r4 : 80a1cc34 [ 1704.877826] r3 : b7e69e50 r2 : 00000000 r1 : 00000000 r0 : 80a1cc34 [ 1704.877833] Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 1704.877838] Control: 10c5387d Table: 3899c06a DAC: 00000015 [ 1704.877843] Process do-oops (pid: 3656, stack limit = 0xb7e68238) [ 1704.877848] Stack: (0xb7e69e50 to 0xb7e6a000) [ 1704.877856] 9e40: 80a1cc3c 00000000 00000010 b88123c8 [ 1704.877865] 9e60: b7e69e84 80a1cc34 fff9fee9 ffffffff b7e68000 00000009 b7e69ea4 b7e69e88 [ 1704.877874] 9e80: 800704b0 80630ea4 fff9fee9 60080013 80a1cc28 fff9fee9 b7e69edc b7e69ea8 [ 1704.877884] 9ea0: 8040f558 80070460 fff9fee9 ffffffff 00000000 00000000 00000009 80a1cb7c [ 1704.877893] 9ec0: 00000000 80a1cb7c 00000000 00000010 b7e69ef4 b7e69ee0 803e1ba4 8040f514 [ 1704.877902] 9ee0: 00000e48 80a1cb7c b7e69f14 b7e69ef8 803e1c9c 803e1b74 b88123c0 b92acb18 [ 1704.877911] 9f00: b8812790 b8d815d8 b7e69f24 b7e69f18 803e2250 803e1bc8 b7e69f5c b7e69f28 [ 1704.877921] 9f20: 80167bac 803e222c 00000000 00000000 b7e69f54 b8ab9ffc 00000000 8098c794 [ 1704.877930] 9f40: b8ab9b00 8000efc4 b7e68000 00000000 b7e69f6c b7e69f60 80167d6c 80167b28 [ 1704.877939] 9f60: b7e69f8c b7e69f70 80047d38 80167d60 b7e68000 b7e68010 8000efc4 b7e69fb0 [ 1704.877949] 9f80: b7e69fac b7e69f90 80012820 80047c84 01155490 011549a8 00000001 00000006 [ 1704.877957] 9fa0: 00000000 b7e69fb0 8000ee5c 80012790 00000000 353d8c0f 7efc4308 00000000 [ 1704.877966] 9fc0: 01155490 011549a8 00000001 00000006 00000000 00000000 76cf3ba0 00000003 [ 1704.877975] 9fe0: 00000000 7efc42e4 0002272f 76e2ed66 60080030 00000003 00000000 00000000 [ 1704.877998] [<80630ee8>] (__down_interruptible) from [<800704b0>] (down_interruptible+0x5c/0x68) [ 1704.878015] [<800704b0>] (down_interruptible) from [<8040f558>] (vchiu_queue_push+0x50/0xd8) [ 1704.878032] [<8040f558>] (vchiu_queue_push) from [<803e1ba4>] (send_worker_msg+0x3c/0x54) [ 1704.878045] [<803e1ba4>] (send_worker_msg) from [<803e1c9c>] (vc_cma_set_reserve+0xe0/0x1c4) [ 1704.878057] [<803e1c9c>] (vc_cma_set_reserve) from [<803e2250>] (vc_cma_release+0x30/0x38) [ 1704.878069] [<803e2250>] (vc_cma_release) from [<80167bac>] (__fput+0x90/0x1e0) [ 1704.878082] [<80167bac>] (__fput) from [<80167d6c>] (____fput+0x18/0x1c) [ 1704.878094] [<80167d6c>] (____fput) from [<80047d38>] (task_work_run+0xc0/0xf8) [ 1704.878109] [<80047d38>] (task_work_run) from [<80012820>] (do_work_pending+0x9c/0xc4) [ 1704.878123] [<80012820>] (do_work_pending) from [<8000ee5c>] (work_pending+0xc/0x20) [ 1704.878133] Code: e50b1034 e3a01000 e50b2030 e580300c (e5823000) ..the fix is to ensure that we have actually initialized the queue before we attempt to push any items onto it. This occurs if we do an open() followed by a close() without any activity in between. Signed-off-by: Colin Ian King <colin.king@canonical.com> vchiq_arm: Sort out the vmalloc case See: https://github.com/raspberrypi/linux/issues/1055 vchiq: hack: Add include depecated dma include file [gregkh] added dependancy on CONFIG_BROKEN to make things sane for now. Cc: Eric Anholt <eric@anholt.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-02IB/hfi1: Fix trace of atomic ackMike Marciniszyn
The length is incorrect, causing the trace data to be truncated. Add the additional 8 bytes that should have been there. Also trace out the atomic ack in hex to aid debugging. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-10-02IB/hfi1: Update SMA ingress checks for response packetsJianxin Xiong
Fix "unsupported method" error by skipping ingress pkey checks on response SMA packets. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Jianxin Xiong <jianxin.xiong@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-10-02IB/hfi1: Use EPROM platform configuration readDean Luick
The driver will now try to read directly from the EPROM as its first choice for the platform configuration file. Reviewed-by: Easwar Hariharan <easwar.hariharan@intel.com> Signed-off-by: Dean Luick <dean.luick@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-10-02IB/hfi1: Add ability to read platform config from the EPROMDean Luick
Add a function to read the platform configuration file from the EPROM. Reviewed-by: Easwar Hariharan <easwar.hariharan@intel.com> Signed-off-by: Dean Luick <dean.luick@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-10-02IB/hfi1: Restore EPROM read abilityDean Luick
Partially revert commit d07903174202 ("IB/hfi1: Remove EPROM functionality from data device"), bringing back the ability to read from the EPROM. This code will be used for driver-only acccess to the EPROM, hence change EPROM read to save to a buffer instead of copy touser. Also allow any offset and remove missed includes and leftover declarations. Reviewed-by: Easwar Hariharan <easwar.hariharan@intel.com> Signed-off-by: Dean Luick <dean.luick@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-10-02IB/hfi1: Document new sysfs entries for hfi1 driverTadeusz Struk
This patch adds description for the sdma engine related sysfs entries for the HFI1 driver. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Reviewed-by: Jianxin Xiong <jianxin.xiong@intel.com> Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-10-02IB/hfi1: Add new debugfs sdma_cpu_list fileTadeusz Struk
Add a debugfs sdma_cpu_list file that can be used to examine the CPU to sdma engine assignments for the whole device. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Reviewed-by: Jianxin Xiong <jianxin.xiong@intel.com> Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-10-02IB/hfi1: Add irq affinity notification handlerTadeusz Struk
This patch adds an irq affinity notification handler. When a user changes interrupt affinity settings for an sdma engine, the driver needs to make changes to its internal sde structures and also update the affinity_hint. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Reviewed-by: Jianxin Xiong <jianxin.xiong@intel.com> Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-10-02IB/hfi1: Add a new VL sysfs attribute for sdma enginesTadeusz Struk
This patch adds a read-only "VL" attribute for the sysfs entry of each sdma engine. It will allow the user to check VL to sdma engine mappings. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Reviewed-by: Jianxin Xiong <jianxin.xiong@intel.com> Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-10-02IB/hfi1: Add sysfs interface for affinity setupTadeusz Struk
Some users want more control over which cpu cores are being used by the driver. For example, users might want to restrict the driver to some specified subset of the cores so that they can appropriately partition processes, irq handlers, and work threads. To allow the user to fine tune system affinity settings new sysfs attributes are introduced per sdma engine. This patch adds a new attribute type for sdma engine and a new cpu_list attribute. When the user writes a cpu range to the cpu_list attribute the driver will create an internal cpu->sdma map, which will be used later as a look-up table to choose an optimal engine for a user requests. Reviewed-by: Dean Luick <dean.luick@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Reviewed-by: Jianxin Xiong <jianxin.xiong@intel.com> Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-10-02IB/hfi1: Fix resource release in context allocationJakub Pawlak
Correct resource free in allocate_ctxt() function. When context creation fails allocated resources are properly released and pointer in receive context data table is set back to NULL. Reviewed-by: Dean Luick <dean.luick@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jakub Pawlak <jakub.pawlak@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-10-02IB/hfi1: Remove unused variable from devdataDennis Dalessandro
We no longer use an error tasklet. Remove it from the hfi1_devdata structure. Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-10-02IB/hfi1: Cleanup tasklet refs in commentsDennis Dalessandro
The code no longer uses tasklets for the send engine. However it does use a tasklet for sdma but the send routines use a workqueue now days. Update the comments to reflect that. Make things more generic with saying "send engine" because that is what is being referred to. Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-10-02IB/hfi1: Adjust hardware buffering parameterHarish Chegondi
It was determined that 0x880 is a better value for hardware buffering, use it. Reviewed-by: Dean Luick <dean.luick@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Harish Chegondi <harish.chegondi@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-10-02IB/hfi1: Act on external device timeoutDean Luick
Add missing external device timeout notification. Recognize it as a failed LNI signal from the 8051 firmware. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Dean Luick <dean.luick@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-10-02IB/hfi1: Fix defered ack race with qp destroyMike Marciniszyn
There is a a bug in defered ack stuff that causes a race with the destroy of a QP. A packet causes a defered ack to be pended by putting the QP into an rcd queue. A return from the driver interrupt processing will process that rcd queue of QPs and attempt to do a direct send of the ack. At this point no locks are held and the above QP could now be put in the reset state in the qp destroy logic. A refcount protects the QP while it is in the rcd queue so it isn't going anywhere yet. If the direct send fails to allocate a pio buffer, hfi1_schedule_send() is called to trigger sending an ack from the send engine. There is no state test in that code path. The refcount is then dropped from the driver.c caller potentially allowing the qp destroy to continue from its refcount wait in parallel with the workqueue scheduling of the qp. Cc: stable@vger.kernel.org Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-10-02IB/hfi1: Combine shift copy and byte copy for SGE readsSebastian Sanchez
Prevent over-reading the SGE length by using byte reads for non quad-word reads. Reviewed-by: Dean Luick <dean.luick@intel.com> Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-10-02IB/hfi1: Do not read more than a SGE lengthSebastian Sanchez
In certain cases, if the tail of an SGE is not 8-byte aligned, bytes beyond the end to an 8-byte alignment can be read. Change the copy routine to avoid the over-read. Instead, stop on the final whole quad-word, then read the remaining bytes. Reviewed-by: Dean Luick <dean.luick@intel.com> Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-10-02IB/hfi1: Extend i2c timeoutDean Luick
Allow a longer timeout for i2c due to clock stretching and inaccurate jiffy timing when under a spin lock. This timeout is consistent with other i2c-algo-bit users. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Dean Luick <dean.luick@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-10-02IB/hfi1: Increase default settings of max_cqes and max_qpsJianxin Xiong
The ib_write_bw test allows using up to 16384 QPs. When a relatively large number of QPs (within that range) is used, the test can fail because the number of CQ entries needed exceeds the limit set by the driver. This patch increases the default setting of max_cqes from 0x2FFFF (196607) to 0x2FFFFF(3145727), which is sufficient to cover the maximum number needed by the ib_write_bw test (2097152). The default setting of max_qps is also increased from 16384 to 32768 to allow the test to run successfully with 16383 or 16384 QPs. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Jianxin Xiong <jianxin.xiong@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-10-02IB/hfi1: Remove filtering of Set(PkeyTable) in HFI SMASebastian Sanchez
The FM should have full control to set the pkeys in the driver pkey table. Remove filtering done by the driver. Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-10-02IB/qib: Remove qpt_mask globalDennis Dalessandro
There is no need to have a global qpt_mask as that does not support the multiple chip model which qib has. Instead rely on the value which exists already in the device data (dd). Fixes: 898fa52b4ac3 "IB/qib: Remove qpn, qp tables and related variables from qib" Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-10-02IB/hfi1: Consolidate pio control masks into single definitionMike Marciniszyn
This allows for adding additional pages of adaptive pio opcode control including manufacturer specific ones. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-10-02IB/rdmavt, IB/hfi1: Add lockdep asserts for lock debugMike Marciniszyn
This patch adds lockdep asserts in key code paths for insuring lock correctness. Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-10-02IB/rdmavt: Add qp init functionMike Marciniszyn
Add an rvt_qp_init() to initialize specific common fields as the qp is created or reset. The routine is shared by the rvt_reset_qp() and the rvt_create_qp(). The intent is that lock dep assertions will only appear in the rvt_reset_qp(). Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-10-02IB/rdmavt: Move reset calldown to reset pathMike Marciniszyn
The reset calldown is misplaced. It should only be called in the code that actually transitions the QP to reset. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-10-02IB/hfi1: Move iowait_init() to priv allocateMike Marciniszyn
The call is misplaced in the reset calldown function and causes issues with lockdep assertions that are to be added. Fixes: Commit a2c2d608957c ("staging/rdma/hfi1: Remove create_qp functionality") Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-10-02IB/rdmavt: Correct sparse annotationMike Marciniszyn
The __must_hold() is sufficent to correct the sparse context imbalance inside a function. Per Documentation/sparse.txt: __must_hold - The specified lock is held on function entry and exit. Fixes: Commit c0a67f6ba356 ("IB/rdmavt: Annotate rvt_reset_qp()") Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-10-02IB/hfi1: Fix locking scheme for affinity settingsTadeusz Struk
Existing locking scheme in affinity.c file using the &node_affinity.lock spinlock is not very elegant. We acquire the lock to get hfi1_affinity_node entry, unlock, and then use the entry without the lock held. With more functions being added, which access and modify the entries, this can lead to race conditions. This patch makes this locking scheme more consistent. It changes the spinlock to mutex. Since all the code is executed in a user process context there is no need for a spinlock. This also allows to keep the lock not only while we look up for the node affinity entry, but over the whole section where the entry is being used. Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Reviewed-by: Jianxin Xiong <jianxin.xiong@intel.com> Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-10-02IB/hfi1: Fix user-space buffers mapping with IOMMU enabledTymoteusz Kielan
The dma_XXX API functions return bus addresses which are physical addresses when IOMMU is disabled. Buffer mapping to user-space is done via remap_pfn_range() with PFN based on bus address instead of physical. This results in wrong pages being mapped to user-space when IOMMU is enabled. Reviewed-by: Mitko Haralanov <mitko.haralanov@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Tymoteusz Kielan <tymoteusz.kielan@intel.com> Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-10-02IB/hfi1: Fix the count of user packets submitted to an SDMA engineHarish Chegondi
Each user SDMA request coming into the driver may contain multiple packets. Each user packet may use multiple SDMA descriptors to fill the send buffer. The field seqsubmitted in struct user_sdma_request counts the number of user packets submitted to an SDMA engine. Sometimes, the intermediate count may not be updated properly. However, once all the packets' descriptors are successfully submitted to the SDMA engine, the final count is updated correctly. But, if only some of the packets are submitted to the engine due to an error, the intermediate count doesn't reflect the partial number of packets submitted to the SDMA engine. This can cause a hang later in the code as the count of packets submitted to the SDMA engine doesn't match the the count of packets processed by the SDMA engine. Reviewed-by: Dean Luick <dean.luick@intel.com> Signed-off-by: Harish Chegondi <harish.chegondi@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-10-02IB/hfi1: Move serdes tune inside link start functionDean Luick
All calls to tune_serdes and start_link are paired. Move tune_serdes inside start_link. Reviewed-by: Easwar Hariharan <easwar.hariharan@intel.com> Signed-off-by: Dean Luick <dean.luick@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-10-02IB/qib,IB/hfi: Use core common header fileMike Marciniszyn
Use common header file structs, defines, and accessors in the drivers. The old declarations are removed. The repositioning of the includes allows for the removal of hfi1_message_header and replaces its use with ib_header. Also corrected are two issues with set_armed_to_active(): - The "packet" parameter is now a pointer as it should have been - The etype is validated to insure that the header is correct Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Don Hiatt <don.hiatt@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-10-02IB/core: Add ib headers for general useMike Marciniszyn
Add IB headers, defines, and accessors that are identical in both qib and hfi1 into the core includes. The accessors for be maintenance of __be64 fields since alignment is potentially invalid and can differ based on the presense of the GRH. {hfi1,qib}_ib_headers will be ib_headers. {hfi1,qib|_other_headers will be ib_other_headers. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Don Hiatt <don.hiatt@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-10-02Merge branches 'pm-devfreq' and 'pm-sleep'Rafael J. Wysocki
* pm-devfreq: PM / devfreq: rk3399_dmc: Remove explictly regulator_put call in .remove PM / devfreq: rockchip: add PM_DEVFREQ_EVENT dependency partial revert of "PM / devfreq: Add COMPILE_TEST for build coverage" PM / devfreq: rockchip: add devfreq driver for rk3399 dmc Documentation: bindings: add dt documentation for rk3399 dmc PM / devfreq: event: support rockchip dfi controller Documentation: bindings: add dt documentation for dfi controller PM / devfreq: event: remove duplicate devfreq_event_get_drvdata() PM / devfreq: fix Kconfig indent style PM / devfreq: Add COMPILE_TEST for build coverage PM / devfreq: exynos-ppmu: remove unneeded of_node_put() * pm-sleep: PM / Hibernate: allow hibernation with PAGE_POISONING_ZERO PM / sleep: enable suspend-to-idle even without registered suspend_ops PM / sleep: Increase default DPM watchdog timeout to 120
2016-10-02Merge branches 'pm-cpuidle', 'pm-opp' and 'pm-avs'Rafael J. Wysocki
* pm-cpuidle: ARM: cpuidle: Fix error return code * pm-opp: PM / OPP: Don't support OPP if it provides supported-hw but platform does not PM / OPP: avoid maybe-uninitialized warning * pm-avs: PM / AVS: SmartReflex: Neaten logging
2016-10-02Merge branch 'pm-cpufreq'Rafael J. Wysocki
* pm-cpufreq: (24 commits) cpufreq: st: add missing \n to end of dev_err message cpufreq: kirkwood: add missing \n to end of dev_err messages cpufreq: CPPC: Avoid overflow when calculating desired_perf cpufreq: ti: Use generic platdev driver cpufreq: intel_pstate: Add io_boost trace cpufreq: intel_pstate: Use IOWAIT flag in Atom algorithm cpufreq: schedutil: Add iowait boosting cpufreq / sched: SCHED_CPUFREQ_IOWAIT flag to indicate iowait condition cpufreq: CPPC: Force reporting values in KHz to fix user space interface cpufreq: create link to policy only for registered CPUs intel_pstate: constify local structures cpufreq: dt: Support governor tunables per policy cpufreq: dt: Update kconfig description cpufreq: dt: Remove unused code MAINTAINERS: Add Documentation/cpu-freq/ cpufreq: dt: Add support for r8a7792 cpufreq / sched: ignore SMT when determining max cpu capacity cpufreq: Drop unnecessary check from cpufreq_policy_alloc() ARM: multi_v7_defconfig: Don't attempt to enable schedutil governor as module ARM: exynos_defconfig: Don't attempt to enable schedutil governor as module ...
2016-10-02Merge branch 'pm-cpufreq-sched' into pm-cpufreqRafael J. Wysocki
2016-10-02Merge branch 'pm-domains'Rafael J. Wysocki
* pm-domains: PM / Domains: Rename pm_genpd_sync_poweron|poweroff() PM / Domains: Don't measure latency of ->power_on|off() during system PM PM / Domains: Remove redundant system PM callbacks PM / Domains: Simplify detaching a device from its genpd PM / Domains: Allow holes in genpd_data.domains array PM / Domains: Add support for removing nested PM domains by provider PM / Domains: Add support for removing PM domains PM / Domains: Store the provider in the PM domain structure PM / Domains: Prepare for adding support to remove PM domains PM / Domains: Verify the PM domain is present when adding a provider PM / Domains: Don't expose xlate and provider helper functions PM / Domains: Don't expose generic_pm_domain structure to clients staging: board: Remove calls to of_genpd_get_from_provider() ARM: EXYNOS: Remove calls to of_genpd_get_from_provider() PM / Domains: Add new helper functions for device-tree PM / Domains: Always enable debugfs support if available
2016-10-02MIPS: CM: Fix mips_cm_max_vp_width for non-MT kernels on MT systemsPaul Burton
When discovering the number of VPEs per core, smp_num_siblings will be incorrect for kernels built without support for the MIPS MultiThreading (MT) ASE running on systems which implement said ASE. This leads to accesses to VPEs in secondary cores being performed incorrectly since mips_cm_vp_id calculates the wrong ID to write to the local "other" registers. Fix this by examining the number of VPEs in the core as reported by the CM. This patch presumes that the number of VPEs will be the same in each core of the system. As this path only applies to systems with CM version 2.5 or lower, and this property is true of all such known systems, this is likely to be fine but is described in a comment for good measure. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14338/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-02Merge branches 'acpi-button', 'acpi-battery' and 'acpi-doc'Rafael J. Wysocki
* acpi-button: ACPI / button: Add document for ACPI control method lid device restrictions ACPI / button: Fix an issue in button.lid_init_state=ignore mode * acpi-battery: ACPI / battery: Add sysfs representation after checking _BST * acpi-doc: ACPI / documentation: Use recommended name in GPIO property names
2016-10-02Merge branches 'acpi-wdat' and 'acpi-ec'Rafael J. Wysocki
* acpi-wdat: watchdog: wdat_wdt: Fix warning for using 0 as NULL watchdog: wdat_wdt: fix return value check in wdat_wdt_probe() platform/x86: intel_pmc_ipc: Do not create iTCO watchdog when WDAT table exists i2c: i801: Do not create iTCO watchdog when WDAT table exists mfd: lpc_ich: Do not create iTCO watchdog when WDAT table exists ACPI / watchdog: Add support for WDAT hardware watchdog * acpi-ec: ACPI / EC: Fix issues related to boot_ec ACPI / EC: Fix a gap that ECDT EC cannot handle EC events ACPI / EC: Fix a memory leakage issue in acpi_ec_add() ACPI / EC: Cleanup first_ec/boot_ec code ACPI / EC: Enable event freeze mode to improve event handling for suspend process ACPI / EC: Add PM operations to improve event handling for suspend process ACPI / EC: Add PM operations to improve event handling for resume process ACPI / EC: Fix an issue that SCI_EVT cannot be detected after event is enabled ACPI / EC: Add EC_FLAGS_QUERY_ENABLED to reveal a hidden logic ACPI / EC: Add PM operations for suspend/resume noirq stage
2016-10-02Merge branches 'acpi-x86', 'acpi-cppc' and 'acpi-soc'Rafael J. Wysocki
* acpi-x86: x86: ACPI: make variable names clearer in acpi_parse_madt_lapic_entries() x86: ACPI: remove extraneous white space after semicolon * acpi-cppc: ACPI / CPPC: Support PCC with interrupt flag ACPI / CPPC: Add prefix cppc to cpudata structure name ACPI / CPPC: Add support for functional fixed hardware address ACPI / CPPC: Don't return on CPPC probe failure ACPI / CPPC: Allow build with ACPI_CPU_FREQ_PSS config ACPI / CPPC: check for error bit in PCC status field ACPI / CPPC: move all PCC related information into pcc_data ACPI / CPPC: add sysfs support to compute delivered performance ACPI / CPPC: set a non-zero value for transition_latency ACPI / CPPC: support for batching CPPC requests ACPI / CPPC: acquire pcc_lock only while accessing PCC subspace ACPI / CPPC: restructure read/writes for efficient sys mapped reg ops mailbox: pcc: Support HW-Reduced Communication Subspace type 2 * acpi-soc: ACPI / APD: constify local structures ACPI / APD: Add device HID for Vulcan SPI controller
2016-10-02Merge branch 'acpi-bus'Rafael J. Wysocki
* acpi-bus: ACPI / bus: Adjust ACPI subsystem initialization for new table loading mode ACPI / bus: Make acpi_get_first_physical_node() public
generated by cgit (git 2.34.1) at 2025-09-12 13:37:54 +0000