summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-09-28drm/amd/display: Initialize writeback connectorAlex Hung
[WHAT] Create a drm_writeback_connector when connector signal equals SIGNAL_TYPE_VIRTUAL. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-28drm/amd: Move microcode init from sw_init to early_init for CIK SDMAMario Limonciello
As part of IP discovery early_init is run for all HW IP blocks. During this phase all firmware is supposed to be identified that may be missing so that the driver can avoid releasing resources used by the EFI framebuffer or simpledrm until the last possible moment. Move microcode loading from sw_init to early_init. Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-28drm/amd: Move microcode init from sw_init to early_init for SDMA v2.4Mario Limonciello
As part of IP discovery early_init is run for all HW IP blocks. During this phase all firmware is supposed to be identified that may be missing so that the driver can avoid releasing resources used by the EFI framebuffer or simpledrm until the last possible moment. Move microcode loading from sw_init to early_init. Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-28drm/amd: Move microcode init from sw_init to early_init for SDMA v3.0Mario Limonciello
As part of IP discovery early_init is run for all HW IP blocks. During this phase all firmware is supposed to be identified that may be missing so that the driver can avoid releasing resources used by the EFI framebuffer or simpledrm until the last possible moment. Move microcode loading from sw_init to early_init. Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-28drm/amd: Move microcode init from sw_init to early_init for SDMA v5.2Mario Limonciello
As part of IP discovery early_init is run for all HW IP blocks. During this phase all firmware is supposed to be identified that may be missing so that the driver can avoid releasing resources used by the EFI framebuffer or simpledrm until the last possible moment. Move microcode loading from sw_init to early_init. Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-28drm/amd: Move microcode init from sw_init to early_init for SDMA v6.0Mario Limonciello
As part of IP discovery early_init is run for all HW IP blocks. During this phase all firmware is supposed to be identified that may be missing so that the driver can avoid releasing resources used by the EFI framebuffer or simpledrm until the last possible moment. Move microcode loading from sw_init to early_init. Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-28drm/amd: Move microcode init from sw_init to early_init for SDMA v5.0Mario Limonciello
As part of IP discovery early_init is run for all HW IP blocks. During this phase all firmware is supposed to be identified that may be missing so that the driver can avoid releasing resources used by the EFI framebuffer or simpledrm until the last possible moment. Move microcode loading from sw_init to early_init. Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-28drm/amd/display: Fix null pointer dereference in error messageCong Liu
This patch fixes a null pointer dereference in the error message that is printed when the Display Core (DC) fails to initialize. The original message includes the DC version number, which is undefined if the DC is not initialized. Fixes: 9788d087caff ("drm/amd/display: improve the message printed when loading DC") Signed-off-by: Cong Liu <liucong2@kylinos.cn> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-28drm/amd/display: Create one virtual connector in DCHarry Wentland
[WHAT] Prepare a virtual connector for writeback. Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-28drm/amd: Drop error message about failing to load SDMA firmwareMario Limonciello
The error path for SDMA firmware loading is unnecessarily noisy. When a firmware is missing 3 errors show up: ``` amdgpu 0000:07:00.0: Direct firmware load for amdgpu/green_sardine_sdma.bin failed with error -2 [drm:sdma_v4_0_early_init [amdgpu]] *ERROR* Failed to load sdma firmware! [drm:amdgpu_device_init [amdgpu]] *ERROR* early_init of IP block <sdma_v4_0> failed -19 ``` The error code for the device init is bubbled up already, remove the second one. Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-28drm/amd/pm: fix the print_clk_levels issue for SMU v13.0.6Le Ma
Pass the correct size to smu_v13_0_6_print_clks, otherwise the same place in buf will be re-written. Signed-off-by: Le Ma <le.ma@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-28drm/amd/pm: deprecate allow_xgmi_power_down interfaceLe Ma
Replace with set_plpd_mode uniformly for places to use. Signed-off-by: Le Ma <le.ma@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-28drm/amd/pm: integrate plpd allow/disallow into select_xgmi_plpd_policy in ↵Le Ma
ppt level The allow_xgmi_power_down(true/false) will be generally replaced by: - allow: select_xgmi_plpd_policy(XGMI_PLPD_DEFAULT) - disallow: select_xgmi_plpd_policy(XGMI_PLPD_DISALLOW) Signed-off-by: Le Ma <le.ma@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-28drm/amd/pm: init plpd_mode properly for different asicsLe Ma
Assign DEFAULT mode if it supports plpd, otherwise keeps NONE v2: reduce ip version checks Signed-off-by: Le Ma <le.ma@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-28drm/amd/display: Remove unused DPCD declarationsStylon Wang
[Why & How] These DPCD addresses are either declared in other header files where it makes more sense or simply not used by any DC code. Remove them to reduce redundancies and potential confusion. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-28drm/amd/display: Skip entire amdgpu_dm build if !CONFIG_DRM_AMD_DCHarry Wentland
[WHY] Previously this only excluded build for a few amdgpu_dm binaries which makes no sense. [HOW] Wrap the entire Makefile in "ifneq ($(CONFIG_DRM_AMD_DC),)" Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-28drm/amd: Limit seamless boot by default to APUsMario Limonciello
A hang is reported on DCN 3.2 with seamless boot enabled. As the benefits come from an eDP setup, limit it to only enabled by default with APUs. Suggested-by: Alexander.Deucher@amd.com Reported-by: feifei.xu@amd.com Closes: https://lore.kernel.org/amd-gfx/85b427f6-11ec-4249-bf6f-eadf9c375f88@amd.com/T/#m2887e919d7c01b2a4860d2261b366d22e070f309 Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-28drm/i915/fdi: Recompute state for affected CRTCs on FDI linksImre Deak
Recompute the state of all CRTCs on an FDI link during a modeset that may be affected by the modeset of other CRTCs on the same link. This ensures that each CRTC on the link maximizes its BW use (after another CRTC is disabled). In practice this means recomputing pipe B's config on IVB if pipe C gets disabled. v2: - Add the change recomputing affected CRTC states in a separate patch. (Ville) v3: (Ville) - Constify old and new crtc states. - Check for fused off pipe C. - Fix new vs. old crtc state mixup. - Drop check for pipe C's enabled state. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230921195159.2646027-12-imre.deak@intel.com
2023-09-28drm/i915/fdi: Improve FDI BW sharing between pipe B and CImre Deak
At the moment modesetting pipe C on IVB will fail if pipe B uses 4 FDI lanes. Make the BW sharing more dynamic by trying to reduce pipe B's link bpp in this case, until pipe B uses only up to 2 FDI lanes. For this instead of the encoder compute config retry loop - which reduced link bpp only for the encoder's pipe - reduce the maximum link bpp for pipe B/C as required after all CRTC states are computed and recompute the CRTC states with the new bpp limit. Atm, all FDI encoder's compute config function returns an error if a BW constrain prevents increasing the pipe bpp value. The corresponding crtc_state->bw_constrained check can be replaced with checking crtc_state->max_link_bpp_x16, add TODO comments for this. SDVO is an exception where this case is only handled in the outer config retry loop, failing the modeset with a WARN, add a FIXME comment to handle this in the encoder code similarly to other encoders. v2: - Don't assume that a CRTC is already in the atomic state, while reducing its link bpp. - Add DocBook description to intel_fdi_atomic_check_link(). v3: - Enable BW management for FDI links in a separate patch. (Ville) v4: (Ville) - Fail the SDVO encoder config computation if it doesn't support the link bpp limit. - Add TODO: comments about checking link_bpp_x16 instead of bw_constrained. v5: - Replace link bpp limit check with a FIXME: comment in intel_sdvo_compute_config(). (Ville) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> [Amended commit message wrt. changes in v5] Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230921195159.2646027-11-imre.deak@intel.com
2023-09-28drm/i915: Add helpers for BW management on shared display linksImre Deak
At the moment a modeset fails if the config computation of a pipe can't fit its required BW to the available link BW even though the limitation may be resolved by reducing the BW requirement of other pipes. To improve the above this patch adds helper functions checking the overall BW limits after all CRTC states have been computed. If the check fails the maximum link bpp for a selected pipe will be reduced and all the CRTC states will be recomputed until either the overall BW limit check passes, or further bpp reduction is not possible (because all pipes/encoders sharing the link BW reached their minimum link bpp). Atm, the MST encoder allocates twice the required BW for YUV420 format streams. A follow-up patchset will fix that, add a code comment about this. This change prepares for upcoming patches enabling the above BW management on FDI and MST links. v2: - Rename intel_crtc_state::max_link_bpp to max_link_bpp_x16 and intel_link_bw_limits::max_bpp to max_bpp_x16. (Jani) v3: - Add the helper functions in a separate patch. (Ville) - Add the functions to intel_link_bw.c instead of intel_atomic.c (Ville) - Return -ENOSPC instead of -EINVAL to userspace in case of a link BW limit failure. v4: - Make intel_atomic_check_config() static. v5: (Ville) - Rename intel_link_bw_limits::min_bpp_pipes to min_bpp_reached_pipes and intel_link_bw_reset_pipe_limit_to_min() to intel_link_bw_set_min_bpp_for_pipe(). - Rename pipe_bpp to link_bpp in intel_link_bw_reduce_bpp(). - Add FIXME: comment about MST encoder's YUV420 BW allocation and tracking the link bpp limit accordingly. v6: - Move intel_link_bw_compute_pipe_bpp() to intel_fdi.c (Ville) - WARN_ON(BIT(pipe) & min_bpp_reached_pipes) in intel_link_bw_set_bpp_limit_for_pipe(). (Ville) - Rename intel_link_bw_set_min_bpp_for_pipe() to intel_link_bw_set_bpp_limit_for_pipe() and intel_link_bw_limits::min_bpp_reached_pipes to bpp_limit_reached_pipes. (Ville) - Remove unused header includes. Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230921195159.2646027-10-imre.deak@intel.com
2023-09-28drm/i915: Factor out a helper to check/compute all the CRTC statesImre Deak
Factor out intel_atomic_check_config() to check and compute all the CRTC states. This will be used by a follow up patch to recompute/check the state until required by BW limitations between CRTCs. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230921195159.2646027-9-imre.deak@intel.com
2023-09-28drm/i915: Rename intel_modeset_all_pipes() to intel_modeset_all_pipes_late()Imre Deak
Rename intel_modeset_all_pipes() to intel_modeset_all_pipes_late() to clarify when the function can be called (vs. intel_modeset_pipes_in_mask_early()). Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230921195159.2646027-8-imre.deak@intel.com
2023-09-28drm/i915: Add helper to modeset a set of pipesImre Deak
Add intel_modeset_pipes_in_mask_early() to modeset a provided set of pipes, used in a follow-up patch. As opposed to intel_modeset_all_pipes() which modesets only the active pipes - others don't requiring programming the HW - modeset all enabled pipes in intel_modeset_pipes_in_mask_early() which may need to recompute their state even if they are not active (that is in the DPMS off state). While at it add DocBook descriptions for the two exported functions. v2: - Add a flag controlling if active planes are force updated as well. - Add DockBook descriptions. v3: - For clarity use _early/_late suffixes for the exported functions instead of the update_active_planes parameter. (Ville) v4: - In intel_modeset_pipes_in_mask_early() update only the crtc flags relevant to the early phase. (Ville) - Rename intel_modeset_all_pipes() in a separate patch. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230921195159.2646027-7-imre.deak@intel.com
2023-09-28drm/i915/dp: Limit the output link bpp in DSC modeImre Deak
Limit the output link bpp in DSC mode to the link_config_limits link.min_bpp_x16 .. max_bpp_x16 range the same way it's done in non-DSC mode. Atm this doesn't make a difference, the link bpp range being 0 .. max pipe bpp, but a follow-up patch will need a way to reduce max link bpp below its current value. v2: - Add to_bpp_int_roundup() instead of open coding it. (Jani) Cc: Jani Nikula <jani.nikula@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230921195159.2646027-6-imre.deak@intel.com
2023-09-28drm/i915/dp: Update the link bpp limits for DSC modeImre Deak
In non-DSC mode the link bpp can be set in 2*3 bpp steps in the pipe bpp range, while in DSC mode it can be set in 1/16 bpp steps to any value up to the maximum pipe bpp. Update the limits accordingly in both modes to prepare for a follow-up patch which may need to reduce the max link bpp value and starts to check the link bpp limits in DSC mode as well. While at it add more detail to the link limit debug print and print it also for DSC mode. v2: - Add to_bpp_frac_dec() instead of open coding it. (Jani) v3: (Ville) - Add BPP_X16_FMT / BPP_X16_ARG. - Add TODO: comment about initializing the DSC link bpp limits earlier. Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230921195159.2646027-5-imre.deak@intel.com
2023-09-28drm/i915/dp: Skip computing a non-DSC link config if DSC is neededImre Deak
Computing the non-DSC mode link config is redundant once it's determined that DSC will be needed, so skip computing it. In a follow-up patch this simplifies setting the link limits which are dependent on the DSC vs. non-DSC mode. While at it sanitize the debug print about the MST DSC fallback path, making it similar to the SST DSC one. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230921195159.2646027-4-imre.deak@intel.com
2023-09-28drm/i915/dp: Track the pipe and link bpp limits separatelyImre Deak
A follow-up patch will need to limit the output link bpp both in the non-DSC and DSC configuration, so track the pipe and link bpp limits separately in the link_config_limits struct. Use .4 fixed point format for link bpp matching the 1/16 bpp granularity in DSC mode and for now keep this limit matching the pipe bpp limit. v2: (Jani) - Add to_bpp_int(), to_bpp_x16() helpers instead of opencoding them. - Rename link_config_limits::link.min/max_bpp to min/max_bpp_x16. Cc: Jani Nikula <jani.nikula@linux.intel.com> Reviewed-by: Luca Coelho <luciano.coelho@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230921195159.2646027-3-imre.deak@intel.com
2023-09-28drm/i915/dp: Factor out helpers to compute the link limitsImre Deak
Factor out helpers that DP / DP_MST encoders can use to compute the link rate/lane count and bpp limits. A follow-up patch will call these to recalculate the limits if DSC compression is required. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230921195159.2646027-2-imre.deak@intel.com
2023-09-28drm/i915: Don't set PIPE_CONTROL_FLUSH_L3 for aux invalNirmoy Das
PIPE_CONTROL_FLUSH_L3 is not needed for aux invalidation so don't set that. Fixes: ad8ebf12217e ("drm/i915/gt: Ensure memory quiesced before invalidation") Cc: Jonathan Cavitt <jonathan.cavitt@intel.com> Cc: Andi Shyti <andi.shyti@linux.intel.com> Cc: <stable@vger.kernel.org> # v5.8+ Cc: Andrzej Hajda <andrzej.hajda@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Tejas Upadhyay <tejas.upadhyay@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com> Cc: Tapani Pälli <tapani.palli@intel.com> Cc: Mark Janes <mark.janes@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Nirmoy Das <nirmoy.das@intel.com> Acked-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Tested-by: Tapani Pälli <tapani.palli@intel.com> Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230926142401.25687-1-nirmoy.das@intel.com
2023-09-28drm/bridge: lt9611uxc: use drm_bridge_get_edid() instead of using ->get_edid ↵Jani Nikula
directly Make drm_bridge_get_edid() the one place to call the hook. Cc: Andrzej Hajda <andrzej.hajda@intel.com> Cc: Neil Armstrong <neil.armstrong@linaro.org> Cc: Robert Foss <rfoss@kernel.org> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230914131450.2473061-2-jani.nikula@intel.com
2023-09-28drm/bridge: use drm_bridge_get_edid() instead of using ->get_edid directlyJani Nikula
Make drm_bridge_get_edid() the one place to call the hook. Cc: Andrzej Hajda <andrzej.hajda@intel.com> Cc: Neil Armstrong <neil.armstrong@linaro.org> Cc: Robert Foss <rfoss@kernel.org> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230914131450.2473061-1-jani.nikula@intel.com
2023-09-28MAINTAINERS: Document that the NXP i.MX 8MQ DCSS driver goes thru drm-miscDouglas Anderson
As per the discussion on the lists [1], changes to this driver generally flow through drm-misc. Add a tag in MAINTAINERS to document this [1] https://lore.kernel.org/r/20230925054710.r3guqn5jzdl4giwd@fsr-ub1664-121.ea.freescale.net Signed-off-by: Douglas Anderson <dianders@chromium.org> Acked-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com> Signed-off-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230925154929.1.I3287e895ce8e68d41b458494a49a1b5ec5c71013@changeid
2023-09-28MAINTAINERS: Update drm-misc entry to match all driversMaxime Ripard
We've had a number of times when a patch slipped through and we couldn't pick them up either because our MAINTAINERS entry only covers the framework and thus we weren't Cc'd. Let's take another approach where we match everything, and remove all the drivers that are not maintained through drm-misc. Acked-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Dave Airlie <airlied@redhat.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230921105743.2611263-1-mripard@kernel.org
2023-09-27drm/nouveau/kms/nv50: hide unused variablesArnd Bergmann
After a recent change, two variables are only used in an #ifdef: drivers/gpu/drm/nouveau/dispnv50/disp.c: In function 'nv50_sor_atomic_disable': drivers/gpu/drm/nouveau/dispnv50/disp.c:1569:13: error: unused variable 'ret' [-Werror=unused-variable] 1569 | int ret; | ^~~ drivers/gpu/drm/nouveau/dispnv50/disp.c:1568:28: error: unused variable 'aux' [-Werror=unused-variable] 1568 | struct drm_dp_aux *aux = &nv_connector->aux; | ^~~ Move them into the same conditional block, along with the nv_connector variable that becomes unused during that fix. Fixes: 757033808c95 ("drm/nouveau/kms/nv50-: fixup sink D3 before tearing down link") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Danilo Krummrich <dakr@redhat.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230925155930.677620-1-arnd@kernel.org
2023-09-27drm/gpuvm: doc: fix filename referencesDanilo Krummrich
Commit f72c2db47080 ("drm/gpuvm: rename struct drm_gpuva_manager to struct drm_gpuvm") did also change the corresponding filenames which are referenced from the documentation, but were not adjusted accordingly. Hence, fix up those filenames. Fixes: f72c2db47080 ("drm/gpuvm: rename struct drm_gpuva_manager to struct drm_gpuvm") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Closes: https://lore.kernel.org/dri-devel/20230926150725.4cca5fc5@canb.auug.org.au/ Signed-off-by: Danilo Krummrich <dakr@redhat.com> Acked-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230926105146.10808-1-dakr@redhat.com
2023-09-27drm/i915/dsb: Use DEwake to combat PkgC latencyVille Syrjälä
Normally we could be in a deep PkgC state all the way up to the point when DSB starts its execution at the transcoders undelayed vblank. The DSB will then have to wait for the hardware to wake up before it can execute anything. This will waste a huge chunk of the vblank time just waiting, and risks the DSB execution spilling into the vertical active period. That will be very bad, especially when programming the LUTs as the anti-collision logic will cause DSB to corrupt LUT writes during vertical active. To avoid these problems we can instruct the DSB to pre-wake the display engine on a specific scanline so that everything will be 100% ready to go when we hit the transcoder's undelayed vblank. One annoyance is that the scanline is specified as just that, a single scanline. So if we happen to start the DSB execution after passing said scanline no DEwake will happen and we may drop back into some PkgC state before reaching the transcoder's undelayed vblank. To prevent that we'll use the "force DEwake" bit to manually force the display engine to stay awake. We'll then have to clear the force bit again after the DSB is done (the force bit remains effective even when the DSB is otherwise disabled). Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230606191504.18099-18-ville.syrjala@linux.intel.com Reviewed-by: Uma Shankar <uma.shankar@intel.com>
2023-09-27drm/i915: Introduce intel_crtc_scanline_to_hw()Ville Syrjälä
Add a helper to convert our idea of a scanline to the hw's idea of the same scanline (ie. apply crtc->scanline_offset in reverse). We'll need this to tell the DSB do stuff on a specific scanline. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230606191504.18099-17-ville.syrjala@linux.intel.com Reviewed-by: Uma Shankar <uma.shankar@intel.com>
2023-09-27drm/i915: Introduce skl_watermark_max_latency()Ville Syrjälä
The DSB code will want to know the maximum PkgC latency it has to contend with. Add a helper to expose that information. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230606191504.18099-16-ville.syrjala@linux.intel.com Reviewed-by: Uma Shankar <uma.shankar@intel.com>
2023-09-27drm/i915/dsb: Evade transcoder undelayed vblank when using DSBVille Syrjälä
We want to start the DSB execution from the transcoder's undelayed vblank, so in order to guarantee atomicity with the all the other mmio register writes we need to evade both vblanks. Note that currently we don't add any vblank delay, so this is effectively a nop. But in the future when we start to program double buffered registers from the DSB we'll need to delay the pipe's vblank to provide the register programming "window2" for the DSB. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230606191504.18099-15-ville.syrjala@linux.intel.com Reviewed-by: Uma Shankar <uma.shankar@intel.com>
2023-09-27drm/i915/dsb: Use non-posted register writes for legacy LUTVille Syrjälä
The DSB has problems writing the legacy LUT. The two workarounds I've discoverted are: - write each entry twice back to back - use non-posted writes Let's use non-posted writes as that seems a bit more standard. TODO: measure which is faster Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230606191504.18099-14-ville.syrjala@linux.intel.com Reviewed-by: Uma Shankar <uma.shankar@intel.com>
2023-09-27drm/i915/dsb: Load LUTs using the DSB during vblankVille Syrjälä
Loading LUTs with the DSB outside of vblank doesn't really work due to the palette anti-collision logic. Apparently the DSB register writes don't get stalled like CPU mmio writes do and instead we end up corrupting the LUT entries. Disabling the anti-collision logic would allow us to successfully load the LUT outside of vblank, but presumably that risks the LUT reads from the scanout (temporarily) getting corrupted data from the LUT instead. The anti-collision logic isn't active during vblank so that is when we can successfully load the LUT with the DSB. That is what we want to do anyway to avoid tearing. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230606191504.18099-13-ville.syrjala@linux.intel.com Reviewed-by: Uma Shankar <uma.shankar@intel.com>
2023-09-27drm/i915/dsb: Don't use DSB to load the LUTs during full modesetVille Syrjälä
Using the DSB for LUT loading during full modesets would require some actual though. Let's just use mmio for the time being. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230606191504.18099-12-ville.syrjala@linux.intel.com Reviewed-by: Uma Shankar <uma.shankar@intel.com>
2023-09-27drm/i915/dsb: Add support for non-posted DSB registers writesVille Syrjälä
Writing specific transcoder registers (and as it turns out, the legacy LUT as well) via DSB needs a magic sequence to emit non-posted register writes. Add a helper for this. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230606191504.18099-11-ville.syrjala@linux.intel.com Reviewed-by: Uma Shankar <uma.shankar@intel.com>
2023-09-27drm/i915/dsb: Introduce intel_dsb_reg_write_masked()Ville Syrjälä
Add a function for emitting masked register writes. Note that the mask is implemented through byte enables, so can only mask off aligned 8bit sets of bits. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230606191504.18099-10-ville.syrjala@linux.intel.com Reviewed-by: Uma Shankar <uma.shankar@intel.com>
2023-09-27drm/i915/dsb: Introduce intel_dsb_noop()Ville Syrjälä
Add a helper for emitting a number of DSB NOOPs commands. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230606191504.18099-9-ville.syrjala@linux.intel.com Reviewed-by: Uma Shankar <uma.shankar@intel.com>
2023-09-27drm/i915/dsb: Define the contents of some intstructions bit betterVille Syrjälä
Add some defines to specify what goes inside certain DSB instructions. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230606191504.18099-6-ville.syrjala@linux.intel.com Reviewed-by: Uma Shankar <uma.shankar@intel.com>
2023-09-27drm/i915/dsb: Define more DSB bitsVille Syrjälä
Define all the DSB register bits so I don't have to look through bspec to find them. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230606191504.18099-5-ville.syrjala@linux.intel.com Reviewed-by: Uma Shankar <uma.shankar@intel.com>
2023-09-27drm/i915/dsb: Use non-locked register accessVille Syrjälä
Avoid the locking overhead for DSB registers. We don't need the locks and intel_dsb_commit() in particular needs to be called from the vblank evade critical section and thus needs to be fast. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230606191504.18099-3-ville.syrjala@linux.intel.com Reviewed-by: Uma Shankar <uma.shankar@intel.com>
2023-09-27accel/ivpu: Compile ivpu_debugfs.c conditionallyStanislaw Gruszka
Only compile ivpu_debugfs.c file with CONFIG_DEBUG_FS. Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230907072610.433497-2-stanislaw.gruszka@linux.intel.com
2023-09-27accel/ivpu: Update debugfs to latest changes in DRMStanislaw Gruszka
Use new drm debugfs helpers. This is needed after changes from commit 78346ebf9f94 ("drm/debugfs: drop debugfs_init() for the render and accel node v2"). Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230907072610.433497-1-stanislaw.gruszka@linux.intel.com
generated by cgit (git 2.34.1) at 2025-09-13 06:38:50 +0000