| Age | Commit message (Collapse) | Author |
|---|
|
The commit 91d2a812dfb9 ("locking/rwsem: Make handoff writer
optimistically spin on owner") will allow a recently woken up waiting
writer to spin on the owner. Unfortunately, if the owner happens to be
RWSEM_OWNER_UNKNOWN, the code will incorrectly spin on it leading to a
kernel crash. This is fixed by passing the proper non-spinnable bits
to rwsem_spin_on_owner() so that RWSEM_OWNER_UNKNOWN will be treated
as a non-spinnable target.
Fixes: 91d2a812dfb9 ("locking/rwsem: Make handoff writer optimistically spin on owner")
Reported-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20200115154336.8679-1-longman@redhat.com
|
|
Description of hardware operation
---------------------------------
The core AMD PMU has a 4-bit wide per-cycle increment for each
performance monitor counter. That works for most events, but
now with AMD Family 17h and above processors, some events can
occur more than 15 times in a cycle. Those events are called
"Large Increment per Cycle" events. In order to count these
events, two adjacent h/w PMCs get their count signals merged
to form 8 bits per cycle total. In addition, the PERF_CTR count
registers are merged to be able to count up to 64 bits.
Normally, events like instructions retired, get programmed on a single
counter like so:
PERF_CTL0 (MSR 0xc0010200) 0x000000000053ff0c # event 0x0c, umask 0xff
PERF_CTR0 (MSR 0xc0010201) 0x0000800000000001 # r/w 48-bit count
The next counter at MSRs 0xc0010202-3 remains unused, or can be used
independently to count something else.
When counting Large Increment per Cycle events, such as FLOPs,
however, we now have to reserve the next counter and program the
PERF_CTL (config) register with the Merge event (0xFFF), like so:
PERF_CTL0 (msr 0xc0010200) 0x000000000053ff03 # FLOPs event, umask 0xff
PERF_CTR0 (msr 0xc0010201) 0x0000800000000001 # rd 64-bit cnt, wr lo 48b
PERF_CTL1 (msr 0xc0010202) 0x0000000f004000ff # Merge event, enable bit
PERF_CTR1 (msr 0xc0010203) 0x0000000000000000 # wr hi 16-bits count
The count is widened from the normal 48-bits to 64 bits by having the
second counter carry the higher 16 bits of the count in its lower 16
bits of its counter register.
The odd counter, e.g., PERF_CTL1, is programmed with the enabled Merge
event before the even counter, PERF_CTL0.
The Large Increment feature is available starting with Family 17h.
For more details, search any Family 17h PPR for the "Large Increment
per Cycle Events" section, e.g., section 2.1.15.3 on p. 173 in this
version:
https://www.amd.com/system/files/TechDocs/56176_ppr_Family_17h_Model_71h_B0_pub_Rev_3.06.zip
Description of software operation
---------------------------------
The following steps are taken in order to support reserving and
enabling the extra counter for Large Increment per Cycle events:
1. In the main x86 scheduler, we reduce the number of available
counters by the number of Large Increment per Cycle events being
scheduled, tracked by a new cpuc variable 'n_pair' and a new
amd_put_event_constraints_f17h(). This improves the counter
scheduler success rate.
2. In perf_assign_events(), if a counter is assigned to a Large
Increment event, we increment the current counter variable, so the
counter used for the Merge event is removed from assignment
consideration by upcoming event assignments.
3. In find_counter(), if a counter has been found for the Large
Increment event, we set the next counter as used, to prevent other
events from using it.
4. We perform steps 2 & 3 also in the x86 scheduler fastpath, i.e.,
we add Merge event accounting to the existing used_mask logic.
5. Finally, we add on the programming of Merge event to the
neighbouring PMC counters in the counter enable/disable{_all}
code paths.
Currently, software does not support a single PMU with mixed 48- and
64-bit counting, so Large increment event counts are limited to 48
bits. In set_period, we zero-out the upper 16 bits of the count, so
the hardware doesn't copy them to the even counter's higher bits.
Simple invocation example showing counting 8 FLOPs per 256-bit/%ymm
vaddps instruction executed in a loop 100 million times:
perf stat -e cpu/fp_ret_sse_avx_ops.all/,cpu/instructions/ <workload>
Performance counter stats for '<workload>':
800,000,000 cpu/fp_ret_sse_avx_ops.all/u
300,042,101 cpu/instructions/u
Prior to this patch, the reported SSE/AVX FLOPs retired count would
be wrong.
[peterz: lots of renames and edits to the code]
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
|
AMD Family 17h processors and above gain support for Large Increment
per Cycle events. Unfortunately there is no CPUID or equivalent bit
that indicates whether the feature exists or not, so we continue to
determine eligibility based on a CPU family number comparison.
For Large Increment per Cycle events, we add a f17h-and-compatibles
get_event_constraints_f17h() that returns an even counter bitmask:
Large Increment per Cycle events can only be placed on PMCs 0, 2,
and 4 out of the currently available 0-5. The only currently
public event that requires this feature to report valid counts
is PMCx003 "Retired SSE/AVX Operations".
Note that the CPU family logic in amd_core_pmu_init() is changed
so as to be able to selectively add initialization for features
available in ranges of backward-compatible CPU families. This
Large Increment per Cycle feature is expected to be retained
in future families.
A side-effect of assigning a new get_constraints function for f17h
disables calling the old (prior to f15h) amd_get_event_constraints
implementation left enabled by commit e40ed1542dd7 ("perf/x86: Add perf
support for AMD family-17h processors"), which is no longer
necessary since those North Bridge event codes are obsoleted.
Also fix a spelling mistake whilst in the area (calulating ->
calculating).
Fixes: e40ed1542dd7 ("perf/x86: Add perf support for AMD family-17h processors")
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20191114183720.19887-2-kim.phillips@amd.com
|
|
Comet Lake supports the same RAPL counters like Kaby Lake and Skylake.
After this, on CML machine the energy counters appear in perf list.
Signed-off-by: Harry Pan <harry.pan@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20191227171944.1.Id6f3ab98474d7d1dba5b95390b24e0a67368d364@changeid
|
|
topology.c::get_group() relies on the assumption that non-NUMA domains do
not partially overlap. Zeng Tao pointed out in [1] that such topology
descriptions, while completely bogus, can end up being exposed to the
scheduler.
In his example (8 CPUs, 2-node system), we end up with:
MC span for CPU3 == 3-7
MC span for CPU4 == 4-7
The first pass through get_group(3, sdd@MC) will result in the following
sched_group list:
3 -> 4 -> 5 -> 6 -> 7
^ /
`----------------'
And a later pass through get_group(4, sdd@MC) will "corrupt" that to:
3 -> 4 -> 5 -> 6 -> 7
^ /
`-----------'
which will completely break things like 'while (sg != sd->groups)' when
using CPU3's base sched_domain.
There already are some architecture-specific checks in place such as
x86/kernel/smpboot.c::topology.sane(), but this is something we can detect
in the core scheduler, so it seems worthwhile to do so.
Warn and abort the construction of the sched domains if such a broken
topology description is detected. Note that this is somewhat
expensive (O(t.c²), 't' non-NUMA topology levels and 'c' CPUs) and could be
gated under SCHED_DEBUG if deemed necessary.
Testing
=======
Dietmar managed to reproduce this using the following qemu incantation:
$ qemu-system-aarch64 -kernel ./Image -hda ./qemu-image-aarch64.img \
-append 'root=/dev/vda console=ttyAMA0 loglevel=8 sched_debug' -smp \
cores=8 --nographic -m 512 -cpu cortex-a53 -machine virt -numa \
node,cpus=0-2,nodeid=0 -numa node,cpus=3-7,nodeid=1
alongside the following drivers/base/arch_topology.c hack (AIUI wouldn't be
needed if '-smp cores=X, sockets=Y' would work with qemu):
8<---
@@ -465,6 +465,9 @@ void update_siblings_masks(unsigned int cpuid)
if (cpuid_topo->package_id != cpu_topo->package_id)
continue;
+ if ((cpu < 4 && cpuid > 3) || (cpu > 3 && cpuid < 4))
+ continue;
+
cpumask_set_cpu(cpuid, &cpu_topo->core_sibling);
cpumask_set_cpu(cpu, &cpuid_topo->core_sibling);
8<---
[1]: https://lkml.kernel.org/r/1577088979-8545-1-git-send-email-prime.zeng@hisilicon.com
Reported-by: Zeng Tao <prime.zeng@hisilicon.com>
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200115160915.22575-1-valentin.schneider@arm.com
|
|
There is a spelling misake in comments of cpuidle_idle_call. Fix it.
Signed-off-by: Hewenliang <hewenliang4@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: https://lkml.kernel.org/r/20200110025604.34373-1-hewenliang4@huawei.com
|
|
With commit
bef69dd87828 ("sched/cpufreq: Move the cfs_rq_util_change() call to cpufreq_update_util()")
update_load_avg() has become the central point for calling cpufreq
(not including the update of blocked load). This change helps to
simplify further the number of calls to cpufreq_update_util() and to
remove last redundant ones. With update_load_avg(), we are now sure
that cpufreq_update_util() will be called after every task attachment
to a cfs_rq and especially after propagating this event down to the
util_avg of the root cfs_rq, which is the level that is used by
cpufreq governors like schedutil to set the frequency of a CPU.
The SCHED_CPUFREQ_MIGRATION flag forces an early call to cpufreq when
the migration happens in a cgroup whereas util_avg of root cfs_rq is
not yet updated and this call is duplicated with the one that happens
immediately after when the migration event reaches the root cfs_rq.
The dedicated flag SCHED_CPUFREQ_MIGRATION is now useless and can be
removed. The interface of attach_entity_load_avg() can also be
simplified accordingly.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lkml.kernel.org/r/1579083620-24943-1-git-send-email-vincent.guittot@linaro.org
|
|
when psi enabled
when CONFIG_PSI_DEFAULT_DISABLED set to N or the command line set psi=0,
I think we should not create /proc/pressure and
/proc/pressure/{io|memory|cpu}.
In the future, user maybe determine whether the psi feature is enabled by
checking the existence of the /proc/pressure dir or
/proc/pressure/{io|memory|cpu} files.
Signed-off-by: Wang Long <w@laoqinren.net>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Link: https://lkml.kernel.org/r/1576672698-32504-1-git-send-email-w@laoqinren.net
|
|
commit bf475ce0a3dd ("sched/fair: Add per-CPU min capacity to
sched_group_capacity") introduced per-cpu min_capacity.
commit e3d6d0cb66f2 ("sched/fair: Add sched_group per-CPU max capacity")
introduced per-cpu max_capacity.
In the SD_OVERLAP case, the local variable 'capacity' represents the sum
of CPU capacity of all CPUs in the first sched group (sg) of the sched
domain (sd).
It is erroneously used to calculate sg's min and max CPU capacity.
To fix this use capacity_of(cpu) instead of 'capacity'.
The code which achieves this via cpu_rq(cpu)->sd->groups->sgc->capacity
(for rq->sd != NULL) can be removed since it delivers the same value as
capacity_of(cpu) which is currently only used for the (!rq->sd) case
(see update_cpu_capacity()).
An sg of the lowest sd (rq->sd or sd->child == NULL) represents a single
CPU (and hence sg->sgc->capacity == capacity_of(cpu)).
Signed-off-by: Peng Liu <iwtbavbm@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20200104130828.GA7718@iZj6chx1xj0e0buvshuecpZ
|
|
Move the code of calculation for delta_sum/delta_avg to where
it is really needed to be done.
Signed-off-by: Peng Wang <rocking@linux.alibaba.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20200103114400.17668-1-rocking@linux.alibaba.com
|
|
Every time we call irqtime_account_process_tick() is in a interrupt,
Every caller will get and assign a parameter rq = this_rq(), This is
unnecessary and increase the code size a little bit. Move the rq getting
action to irqtime_account_process_tick internally is better.
base with this patch
cputime.o 578792 bytes 577888 bytes
Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/1577959674-255537-1-git-send-email-alex.shi@linux.alibaba.com
|
|
The function stop_cpus() is only used internally by the
stop_machine for stop multiple cpus.
Make it static.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20191228161912.24082-1-tiny.windzz@gmail.com
|
|
Lengthy output of sysrq-t may take a lot of time on slow serial console
with lots of processes and CPUs.
So we need to reset NMI-watchdog to avoid spurious lockup messages, and
we also reset softlockup watchdogs on all other CPUs since another CPU
might be blocked waiting for us to process an IPI or stop_machine.
Add to sysrq_sched_debug_show() as what we did in show_state_filter().
Signed-off-by: Wei Li <liwei391@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: https://lkml.kernel.org/r/20191226085224.48942-1-liwei391@huawei.com
|
|
rq::uclamp is an array of struct uclamp_rq, make sure we clear the
whole thing.
Fixes: 69842cba9ace ("sched/uclamp: Add CPU's clamp buckets refcountinga")
Signed-off-by: Li Guanglei <guanglei.li@unisoc.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Qais Yousef <qais.yousef@arm.com>
Link: https://lkml.kernel.org/r/1577259844-12677-1-git-send-email-guangleix.li@gmail.com
|
|
When a new cgroup is created, the effective uclamp value wasn't updated
with a call to cpu_util_update_eff() that looks at the hierarchy and
update to the most restrictive values.
Fix it by ensuring to call cpu_util_update_eff() when a new cgroup
becomes online.
Without this change, the newly created cgroup uses the default
root_task_group uclamp values, which is 1024 for both uclamp_{min, max},
which will cause the rq to to be clamped to max, hence cause the
system to run at max frequency.
The problem was observed on Ubuntu server and was reproduced on Debian
and Buildroot rootfs.
By default, Ubuntu and Debian create a cpu controller cgroup hierarchy
and add all tasks to it - which creates enough noise to keep the rq
uclamp value at max most of the time. Imitating this behavior makes the
problem visible in Buildroot too which otherwise looks fine since it's a
minimal userspace.
Fixes: 0b60ba2dd342 ("sched/uclamp: Propagate parent clamps")
Reported-by: Doug Smythies <dsmythies@telus.net>
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Doug Smythies <dsmythies@telus.net>
Link: https://lore.kernel.org/lkml/000701d5b965$361b6c60$a2524520$@net/
|
|
The fair scheduler performs periodic load balance on every CPU to check
if it can pull some tasks from other busy CPUs. The duration of this
periodic load balance is set to sd->balance_interval for the idle CPUs
and is calculated by multiplying the sd->balance_interval with the
sd->busy_factor (set to 32 by default) for the busy CPUs. The
multiplication is done for busy CPUs to avoid doing load balance too
often and rather spend more time executing actual task. While that is
the right thing to do for the CPUs busy with SCHED_OTHER or SCHED_BATCH
tasks, it may not be the optimal thing for CPUs running only SCHED_IDLE
tasks.
With the recent enhancements in the fair scheduler around SCHED_IDLE
CPUs, we now prefer to enqueue a newly-woken task to a SCHED_IDLE
CPU instead of other busy or idle CPUs. The same reasoning should be
applied to the load balancer as well to make it migrate tasks more
aggressively to a SCHED_IDLE CPU, as that will reduce the scheduling
latency of the migrated (SCHED_OTHER) tasks.
This patch makes minimal changes to the fair scheduler to do the next
load balance soon after the last non SCHED_IDLE task is dequeued from a
runqueue, i.e. making the CPU SCHED_IDLE. Also the sd->busy_factor is
ignored while calculating the balance_interval for such CPUs. This is
done to avoid delaying the periodic load balance by few hundred
milliseconds for SCHED_IDLE CPUs.
This is tested on ARM64 Hikey620 platform (octa-core) with the help of
rt-app and it is verified, using kernel traces, that the newly
SCHED_IDLE CPU does load balancing shortly after it becomes SCHED_IDLE
and pulls tasks from other busy CPUs.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/e485827eb8fe7db0943d6f3f6e0f5a4a70272781.1578471925.git.viresh.kumar@linaro.org
|
|
Similarly to calculate_imbalance() and find_busiest_group(), using the
number of idle CPUs when there is only 1 CPU in the group is not efficient
because we can't make a difference between a CPU running 1 task and a CPU
running dozens of small tasks competing for the same CPU but not enough
to overload it. More generally speaking, we should use the number of
running tasks when there is the same number of idle CPUs in a group instead
of blindly select the 1st one.
When the groups have spare capacity and the same number of idle CPUs, we
compare the number of running tasks to select the busiest group.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/1576839893-26930-1-git-send-email-vincent.guittot@linaro.org
|
|
After commit 9cf57731b63e ("watchdog/softlockup: Replace "watchdog/%u"
threads with cpu_stop_work"), the percpu soft_lockup_hrtimer_cnt is
not used any more, so remove it and related code.
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20191218131720.4146aea2@xhacker.debian
|
|
If syscall_enter_define_fields() is called on a system call with no
arguments, the return code variable "ret" will never get initialized.
Initialize it to zero.
Fixes: 04ae87a52074e ("ftrace: Rework event_create_dir()")
Reported-by: Qian Cai <cai@lca.pw>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/0FA8C6E3-D9F5-416D-A1B0-5E4CD583A101@lca.pw
|
|
gpio_set_config() simply call gpio_do_set_config(),
so remove the duplicated function.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20200116142927.58908-1-yuehaibing@huawei.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/intel into fixes
intel-pinctrl for v5.5-3
* Fix Interrupt Status register offset for Intel Sunrisepoint PCH-H.
The following is an automated git shortlog grouped by driver:
sunrisepoint:
- Add missing Interrupt Status register offset
|
|
|
|
Linux 5.5-rc6
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into char-misc-next
Chanwoo writes:
Update extcon for 5.6
Detailed description for this pull request:
1. Remove unneeded 'extern' keyword from extcon.h header file
2. Clean-up the extcon provider
- Clean-up the code for readability of extcon-arizona/sm5502.c
* tag 'extcon-next-for-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon:
extcon: Remove unneeded extern keyword from extcon.h
extcon: sm5502: Remove unneeded semicolon
extcon: arizona: Factor out microphone and button detection
extcon: arizona: Factor out microphone impedance into a function
extcon: arizona: Invert logic of check in arizona_hpdet_do_id
extcon: arizona: Remove excessive WARN_ON
extcon: arizona: Remove unnecessary sets of ACCDET_MODE
extcon: arizona: Tidy up transition from mic to headphone detect
extcon: arizona: Clear jack status regardless of detection type
extcon: arizona: Move pdata extraction to probe
extcon: arizona: Make rev A register sequences atomic
extcon: arizona: Correct clean up if arizona_identify_headphone fails
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-next
Kishon writes:
phy: for 5.6
*) Add support in PHY core to create link between PHY consumer and PHY
provider
*) Add DisplayPort PHY configuration set to be used for negotiating the
configurations to be used between DisplayPort controller and
DisplayPort PHY
*) Add PHY wrapper driver (configure inputs to Cadence Sierra PHY) for
TI's J721E SoC and adapt Cadence Sierra PHY driver to be used for
J721E SoC (Supports USB and PCIe)
*) Add PHY driver for eMMC PHY in Intel LGM SoC
*) Add PHY support for 7216 and 7211 Broadcom SoCs which uses the new
Synopsys USB Controller
*) Add support for 16nm SATA PHY present in Broadcom 7216 SoC
*) Fix lost packet issue, fix MDIO from getting inaccessible, fix
occasional transaction failures, fix USB driver from crashing in
Broadcom USB PHY driver
*) Fix missing PCS SW reset in UFS PHY of Qualcomm SM8150
*) Use "struct phy_configure_opts_mipi_dphy" to pass parameters from
display controller to rockchip-inno-dsidphy
*) Other cleanups including compile testing for some of the PHY drivers,
fixing Kconfig indentation, duplicate writes in drivers etc.,
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* tag 'phy-for-5.6_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy: (54 commits)
dt-bindings: phy: Add PHY_TYPE_DP definition
phy: ti: j721e-wiz: Fix return value check in wiz_probe()
dt-bindings: usb: Convert Allwinner A80 USB PHY controller to a schema
phy: intel-lgm-emmc: Fix warning by adding missing MODULE_LICENSE
phy: ti: j721e-wiz: Manage typec-gpio-dir
dt-bindings: phy: ti,phy-j721e-wiz: Add Type-C dir GPIO
phy: cadence: Sierra: add phy_reset hook
phy: cadence: Sierra: remove redundant initialization of pointer regmap
phy: Add DisplayPort configuration options
phy: Enable compile testing for some of drivers
phy: mediatek: Fix Kconfig indentation
phy: intel-lgm-emmc: Add support for eMMC PHY
dt-bindings: phy: intel-emmc-phy: Add YAML schema for LGM eMMC PHY
phy: ti: j721e-wiz: Add support for WIZ module present in TI J721E SoC
dt-bindings: phy: Document WIZ (SERDES wrapper) bindings
phy: cadence: Sierra: Use correct dev pointer in cdns_sierra_phy_remove()
phy: cadence: Sierra: Set cmn_refclk_dig_div/cmn_refclk1_dig_div frequency to 25MHz
phy: cadence: Sierra: Change MAX_LANES of Sierra to 16
phy: cadence: Sierra: Check for PLL lock during PHY power on
phy: cadence: Sierra: Get reset control "array" for each link
...
|
|
Add definition for DisplayPort phy type.
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Roger Quadros <rogerq@ti.com>
Reviewed-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
|
|
In case of error, the function devm_ioremap() returns NULL pointer not
ERR_PTR(). The IS_ERR() test in the return value check should be
replaced with NULL test.
Fixes: 091876cc355d ("phy: ti: j721e-wiz: Add support for WIZ module present in TI J721E SoC")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
|
|
While fixing another issue in this driver I noticed it uses
IS_ERR_OR_NULL(), which is almost always a mistake.
Change the driver to use the proper devm_reset_control_get_optional()
interface instead and remove the checks except for the one that
checks for a failure in that function.
Fixes: 2b2c47d9e1fe ("ata: ahci_brcm: Allow optional reset controller to be used")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The new shutdown callback causes a link failure:
drivers/ata/ahci_brcm.c: In function 'brcm_ahci_shutdown':
drivers/ata/ahci_brcm.c:552:8: error: implicit declaration of function 'brcm_ahci_suspend'; did you mean 'brcm_ahci_shutdown'? [-Werror=implicit-function-declaration]
ret = brcm_ahci_suspend(&pdev->dev);
^~~~~~~~~~~~~~~~~
Remove the incorrect #ifdef and use __maybe_unused annotations
instead to make this more robust.
Fixes: 7de9b1688c1d ("ata: ahci_brcm: Add a shutdown callback")
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If the credentials or the mm doesn't match, don't allow the task to
submit anything on behalf of this ring. The task that owns the ring can
pass the file descriptor to another task, but we don't want to allow
that task to submit an SQE that then assumes the ring mm and creds if
it needs to go async.
Cc: stable@vger.kernel.org
Suggested-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The driver was issuing synchronous uninterruptible control requests
without using a timeout. This could lead to the driver hanging on probe
due to a malfunctioning (or malicious) device until the device is
physically disconnected. While sleeping in probe the driver prevents
other devices connected to the same hub from being added to (or removed
from) the bus.
The USB upper limit of five seconds per request should be more than
enough.
Fixes: 99f83c9c9ac9 ("[PATCH] USB: add driver for Keyspan Digital Remote")
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: stable <stable@vger.kernel.org> # 2.6.13
Link: https://lore.kernel.org/r/20200113171715.30621-1-johan@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
We need the of_match table if we want to use the compatible string in
the pmic's child node and get the onkey driver loaded automatically.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
The F54 Report Data is apparently read through a fifo and for
the smbus protocol that means that between reading a block of 32
bytes the rmiaddr shouldn't be incremented. However, changing
that causes other non-fifo reads to fail and so that change was
reverted.
This patch changes just the F54 function and it now reads 32 bytes
at a time from the fifo, using the F54_FIFO_OFFSET to update the
start address that is used when reading from the fifo.
This has only been tested with smbus, not with i2c or spi. But I
suspect that the same is needed there since I think similar
problems will occur there when reading more than 256 bytes.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reported-by: Timo Kaufmann <timokau@zoho.com>
Link: https://lore.kernel.org/r/20200115124819.3191024-3-hverkuil-cisco@xs4all.nl
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
This reverts commit a284e11c371e446371675668d8c8120a27227339.
This causes problems (drifting cursor) with at least the F11 function that
reads more than 32 bytes.
The real issue is in the F54 driver, and so this should be fixed there, and
not in rmi_smbus.c.
So first revert this bad commit, then fix the real problem in F54 in another
patch.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reported-by: Timo Kaufmann <timokau@zoho.com>
Fixes: a284e11c371e ("Input: synaptics-rmi4 - don't increment rmiaddr for SMBus transfers")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200115124819.3191024-2-hverkuil-cisco@xs4all.nl
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
kernel/bpf/syscall.c: In function generic_map_lookup_batch:
kernel/bpf/syscall.c:1339:7: warning: variable first_key set but not used [-Wunused-but-set-variable]
It is never used, so remove it.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Brian Vazquez <brianvv@google.com>
Link: https://lore.kernel.org/bpf/20200116145300.59056-1-yuehaibing@huawei.com
|
|
Toke Høiland-Jørgensen says:
====================
Since commit 96360004b862 ("xdp: Make devmap flush_list common for all map
instances"), devmap flushing is a global operation instead of tied to a
particular map. This means that with a bit of refactoring, we can finally fix
the performance delta between the bpf_redirect_map() and bpf_redirect() helper
functions, by introducing bulking for the latter as well.
This series makes this change by moving the data structure used for the bulking
into struct net_device itself, so we can access it even when there is not
devmap. Once this is done, moving the bpf_redirect() helper to use the bulking
mechanism becomes quite trivial, and brings bpf_redirect() up to the same as
bpf_redirect_map():
Before: After:
1 CPU:
bpf_redirect_map: 8.4 Mpps 8.4 Mpps (no change)
bpf_redirect: 5.0 Mpps 8.4 Mpps (+68%)
2 CPUs:
bpf_redirect_map: 15.9 Mpps 16.1 Mpps (+1% or ~no change)
bpf_redirect: 9.5 Mpps 15.9 Mpps (+67%)
After this patch series, the only semantics different between the two variants
of the bpf() helper (apart from the absence of a map argument, obviously) is
that the _map() variant will return an error if passed an invalid map index,
whereas the bpf_redirect() helper will succeed, but drop packets on
xdp_do_redirect(). This is because the helper has no reference to the calling
netdev, so unfortunately we can't do the ifindex lookup directly in the helper.
Changelog:
v3:
- Switch two more fields to avoid a list_head spanning two cache lines
- Include Jesper's tracepoint patch
- Also rename xdp_do_flush_map()
- Fix a few nits from Maciej
v2:
- Consolidate code paths and tracepoints for map and non-map redirect variants
(Björn)
- Add performance data for 2-CPU test (Jesper)
- Move fields to avoid shifting cache lines in struct net_device (Eric)
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Now that we don't have a reference to a devmap when flushing the device
bulk queue, let's change the the devmap_xmit tracepoint to remote the
map_id and map_index fields entirely. Rearrange the fields so 'drops' and
'sent' stay in the same position in the tracepoint struct, to make it
possible for the xdp_monitor utility to read both the old and the new
format.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/157918768613.1458396.9165902403373826572.stgit@toke.dk
|
|
Since the bulk queue used by XDP_REDIRECT now lives in struct net_device,
we can re-use the bulking for the non-map version of the bpf_redirect()
helper. This is a simple matter of having xdp_do_redirect_slow() queue the
frame on the bulk queue instead of sending it out with __bpf_tx_xdp().
Unfortunately we can't make the bpf_redirect() helper return an error if
the ifindex doesn't exit (as bpf_redirect_map() does), because we don't
have a reference to the network namespace of the ingress device at the time
the helper is called. So we have to leave it as-is and keep the device
lookup in xdp_do_redirect_slow().
Since this leaves less reason to have the non-map redirect code in a
separate function, so we get rid of the xdp_do_redirect_slow() function
entirely. This does lose us the tracepoint disambiguation, but fortunately
the xdp_redirect and xdp_redirect_map tracepoints use the same tracepoint
entry structures. This means both can contain a map index, so we can just
amend the tracepoint definitions so we always emit the xdp_redirect(_err)
tracepoints, but with the map ID only populated if a map is present. This
means we retire the xdp_redirect_map(_err) tracepoints entirely, but keep
the definitions around in case someone is still listening for them.
With this change, the performance of the xdp_redirect sample program goes
from 5Mpps to 8.4Mpps (a 68% increase).
Since the flush functions are no longer map-specific, rename the flush()
functions to drop _map from their names. One of the renamed functions is
the xdp_do_flush_map() callback used in all the xdp-enabled drivers. To
keep from having to update all drivers, use a #define to keep the old name
working, and only update the virtual drivers in this patch.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/157918768505.1458396.17518057312953572912.stgit@toke.dk
|
|
Commit 96360004b862 ("xdp: Make devmap flush_list common for all map
instances"), changed devmap flushing to be a global operation instead of a
per-map operation. However, the queue structure used for bulking was still
allocated as part of the containing map.
This patch moves the devmap bulk queue into struct net_device. The
motivation for this is reusing it for the non-map variant of XDP_REDIRECT,
which will be changed in a subsequent commit. To avoid other fields of
struct net_device moving to different cache lines, we also move a couple of
other members around.
We defer the actual allocation of the bulk queue structure until the
NETDEV_REGISTER notification devmap.c. This makes it possible to check for
ndo_xdp_xmit support before allocating the structure, which is not possible
at the time struct net_device is allocated. However, we keep the freeing in
free_netdev() to avoid adding another RCU callback on NETDEV_UNREGISTER.
Because of this change, we lose the reference back to the map that
originated the redirect, so change the tracepoint to always return 0 as the
map ID and index. Otherwise no functional change is intended with this
patch.
After this patch, the relevant part of struct net_device looks like this,
according to pahole:
/* --- cacheline 14 boundary (896 bytes) --- */
struct netdev_queue * _tx __attribute__((__aligned__(64))); /* 896 8 */
unsigned int num_tx_queues; /* 904 4 */
unsigned int real_num_tx_queues; /* 908 4 */
struct Qdisc * qdisc; /* 912 8 */
unsigned int tx_queue_len; /* 920 4 */
spinlock_t tx_global_lock; /* 924 4 */
struct xdp_dev_bulk_queue * xdp_bulkq; /* 928 8 */
struct xps_dev_maps * xps_cpus_map; /* 936 8 */
struct xps_dev_maps * xps_rxqs_map; /* 944 8 */
struct mini_Qdisc * miniq_egress; /* 952 8 */
/* --- cacheline 15 boundary (960 bytes) --- */
struct hlist_head qdisc_hash[16]; /* 960 128 */
/* --- cacheline 17 boundary (1088 bytes) --- */
struct timer_list watchdog_timer; /* 1088 40 */
/* XXX last struct has 4 bytes of padding */
int watchdog_timeo; /* 1128 4 */
/* XXX 4 bytes hole, try to pack */
struct list_head todo_list; /* 1136 16 */
/* --- cacheline 18 boundary (1152 bytes) --- */
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/157918768397.1458396.12673224324627072349.stgit@toke.dk
|
|
Revert bpf_helpers.h's change to include auto-generated bpf_helper_defs.h
through <> instead of "", which causes it to be searched in include path. This
can break existing applications that don't have their include path pointing
directly to where libbpf installs its headers.
There is ongoing work to make all (not just bpf_helper_defs.h) includes more
consistent across libbpf and its consumers, but this unbreaks user code as is
right now without any regressions. Selftests still behave sub-optimally
(taking bpf_helper_defs.h from libbpf's source directory, if it's present
there), which will be fixed in subsequent patches.
Fixes: 6910d7d3867a ("selftests/bpf: Ensure bpf_helper_defs.h are taken from selftests dir")
Reported-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200117004103.148068-1-andriin@fb.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Olof Johansson:
"I've been sitting on these longer than I meant, so the patch count is
a bit higher than ideal for this part of the release. There's also
some reverts of double-applied patches that brings the diffstat up a
bit.
With that said, the biggest changes are:
- Revert of duplicate i2c device addition on two Aspeed (BMC)
Devicetrees.
- Move of two device nodes that got applied to the wrong part of the
tree on ASpeed G6.
- Regulator fix for Beaglebone X15 (adding 12/5V supplies)
- Use interrupts for keys on Amlogic SM1 to avoid missed polls
In addition to that, there is a collection of smaller DT fixes:
- Power supply assignment fixes for i.MX6
- Fix of interrupt line for magnetometer on i.MX8 Librem5 devkit
- Build fixlets (selects) for davinci/omap2+
- More interrupt number fixes for Stratix10, Amlogic SM1, etc.
- ... and more similar fixes across different platforms
And some non-DT stuff:
- optee fix to register multiple shared pages properly
- Clock calculation fixes for MMP3
- Clock fixes for OMAP as well"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (42 commits)
MAINTAINERS: Add myself as the co-maintainer for Actions Semi platforms
ARM: dts: imx7: Fix Toradex Colibri iMX7S 256MB NAND flash support
ARM: dts: imx6sll-evk: Remove incorrect power supply assignment
ARM: dts: imx6sl-evk: Remove incorrect power supply assignment
ARM: dts: imx6sx-sdb: Remove incorrect power supply assignment
ARM: dts: imx6qdl-sabresd: Remove incorrect power supply assignment
ARM: dts: imx6q-icore-mipi: Use 1.5 version of i.Core MX6DL
ARM: omap2plus: select RESET_CONTROLLER
ARM: davinci: select CONFIG_RESET_CONTROLLER
ARM: dts: aspeed: rainier: Fix fan fault and presence
ARM: dts: aspeed: rainier: Remove duplicate i2c busses
ARM: dts: aspeed: tacoma: Remove duplicate flash nodes
ARM: dts: aspeed: tacoma: Remove duplicate i2c busses
ARM: dts: aspeed: tacoma: Fix fsi master node
ARM: dts: aspeed-g6: Fix FSI master location
ARM: dts: mmp3: Fix the TWSI ranges
clk: mmp2: Fix the order of timer mux parents
ARM: mmp: do not divide the clock rate
arm64: dts: rockchip: Fix IR on Beelink A1
optee: Fix multi page dynamic shm pool alloc
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"Second collection of clk fixes for the next release.
This one includes a fix for PM on TI SoCs with sysc devices and fixes
a bunch of clks that are stuck always enabled on Qualcomm SDM845 SoCs.
Allwinner SoCs get the usual set of fixes too, mostly correcting
drivers to have the right bits that match the hardware.
There's also a Samsung and Tegra fix in here to mark a clk critical
and avoid a double free.
And finally there's a fix for critical clks that silences a big
warning splat about trying to enable a clk that couldn't even be
prepared"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: ti: dra7-atl: Remove pm_runtime_irq_safe()
clk: qcom: gcc-sdm845: Add missing flag to votable GDSCs
clk: sunxi-ng: h6-r: Fix AR100/R_APB2 parent order
clk: sunxi-ng: h6-r: Simplify R_APB1 clock definition
clk: sunxi-ng: sun8i-r: Fix divider on APB0 clock
clk: Don't try to enable critical clocks if prepare failed
clk: tegra: Fix double-free in tegra_clk_init()
clk: samsung: exynos5420: Keep top G3D clocks enabled
clk: sunxi-ng: r40: Allow setting parent rate for external clock outputs
clk: sunxi-ng: v3s: Fix incorrect number of hw_clks.
|
|
In case of error, the function edac_device_alloc_ctl_info() returns a
NULL pointer, not ERR_PTR(). Replace the IS_ERR() test in the return
value check with a NULL test.
Fixes: 91abaeaaff35 ("EDAC/sifive: Add EDAC platform driver for SiFive SoCs")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200115150303.112627-1-weiyongjun1@huawei.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"Fix a coding mistake in the teo cpuidle governor causing data to be
written beyond the last array element (Ikjoon Jang)"
* tag 'pm-5.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpuidle: teo: Fix intervals[] array indexing bug
|
|
Since I've been doing the maintainership work for couple of cycles, we've
decided to add myself as the co-maintainer along with Andreas.
Link: https://lore.kernel.org/r/20200114084348.25659-2-manivannan.sadhasivam@linaro.org
Cc: "Andreas Färber" <afaerber@suse.de>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Increase the number of chains and priorities to support
the whole range available in tc.
We use unmanaged tables and ignore flow level to create more
tables than what we declared to fs_core steering, and we manage
the connections between the tables themselves.
To support that we need FW with ignore_flow_level capability.
Otherwise the old behaviour will be used, where we are limited
by the number of levels we declared (4 chains, 16 prios).
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Oz Shlomo <ozsh@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
To support the entire chain and prio range (32bit + 16bit),
instead of a using a static array of chains/prios of limited size, create
them dynamically, and use a rhashtable to search for existing chains/prio
combinations.
This will be used in next patch to actually increase the number using
unamanged tables support and ignore flow level capability.
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Oz Shlomo <ozsh@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Before changing the chain from original chain to ft offload chain,
make sure user doesn't actually use chains.
While here, normalize the prio range to that which we support.
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
FT chain is defined as the next chain after tc.
To prepare for next patches that will increase the number of tc
chains available at runtime, use a getter function to get this
value.
The define is still used in static fs_core allocation,
to calculate the number of chains. This static allocation
will be used if the relevant capabilities won't be available
to support dynamic chains.
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Exclude the last n entries for an autogrouped flow table.
Reserving entries at the end of the FT will ensure that this FG will be
the last to be evaluated. This will be used in the next patch to create
a miss group enabling custom actions on FT miss.
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Oz Shlomo <ozsh@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
