| Age | Commit message (Collapse) | Author |
|---|
|
Add support to detect J721E SR2.0
Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
Link: https://lore.kernel.org/r/20240624065205.718449-1-n-francis@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
'struct knav_range_ops' is not modified in these drivers.
Constifying this structure moves some data to a read-only section, so
increase overall security.
On a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
7498 1193 0 8691 21f3 drivers/soc/ti/knav_qmss_acc.o
After:
=====
text data bss dec hex filename
7566 1145 0 8711 2207 drivers/soc/ti/knav_qmss_acc.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/a8b4b428f97fc584f38bf45100aa9da241aeb935.1719159074.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
The http://processors.wiki.ti.com EOL in january 2021
Fix the old URL with the new one.
Signed-off-by: Richard Genoud <richard.genoud@bootlin.com>
Link: https://lore.kernel.org/r/20240618150933.1824185-3-richard.genoud@bootlin.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
The http://processors.wiki.ti.com EOL in january 2021
Fix the old URL with the new one.
Signed-off-by: Richard Genoud <richard.genoud@bootlin.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240618150933.1824185-2-richard.genoud@bootlin.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
Add the missing newline characters to two pm33xx log statements
to ensure proper log formatting.
Signed-off-by: Vasyl Gomonovych <gomonovych@gmail.com>
Link: https://lore.kernel.org/r/20240517212930.2019962-1-gomonovych@gmail.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
I noticed that there's technically not an explicit maintainer for this
directory, even if the files currently in it are covered by either the
Mircochip FPGA or AT91 entries. Add it to the entry covering the
corresponding driver directory.
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
The directory covering cache controller bindings has no MAINTAINER other
than the fallback to myself, Rob and Krzysztof. Add it to the entry for
the corresponding drivers.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
https://git.linaro.org/people/jens.wiklander/linux-tee into soc/drivers
optee: add timeout parameter for notification wait
* tag 'optee-notif-wait-timeout-for-v6.11' of https://git.linaro.org/people/jens.wiklander/linux-tee:
optee: add timeout value to optee_notif_wait() to support timeout
Link: https://lore.kernel.org/r/20240627095325.GA2585076@rayden
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
soc/drivers
Reset controller updates for v6.11
Move reset controller registration to the end in rzg2l-usbphy-ctrl, to
simplify the probe error path, add a new i.MX8MP AudioMix reset driver,
allow to build some drivers under COMPILE_TEST with fewer dependencies,
and use the devm_clk_get_enabled convenience wrapper in meson-audio-arb.
The latter causes a trivial merge conflict [1] with
b99e9c096148f ("reset: meson-audio-arb: Convert to platform remove callback returning void")
because I didn't manage to send that in last round. There is no overlap
though.
[1] https://lore.kernel.org/all/Znmufb9L78FCoSSS@sirena.org.uk/
* tag 'reset-for-v6.11' of git://git.pengutronix.de/pza/linux:
reset: RESET_IMX8MP_AUDIOMIX should depend on ARCH_MXC
reset: zynqmp: allow building under COMPILE_TEST
reset: imx8mp-audiomix: Add AudioMix Block Control reset driver
reset: meson-audio-arb: Use devm_clk_get_enabled()
reset: sti: allow building under COMPILE_TEST
reset: rzg2l-usbphy-ctrl: Move reset controller registration
Link: https://lore.kernel.org/r/20240626163258.61222-1-p.zabel@pengutronix.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
With ARCH=x86, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/soc/imx/soc-imx8m.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/soc/ixp4xx/ixp4xx-qmgr.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/soc/ixp4xx/ixp4xx-npe.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/soc/mediatek/mtk-cmdq-helper.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/soc/amlogic/meson-clk-measure.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> # for amlogic/meson-clk-measure.c
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240625-md-drivers-soc-v2-1-8bc7c03e3e69@quicinc.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/drivers
Arm FF-A driver updates for v6.11
The main addition is the split of bus and driver into distinct modules
The FF-A bus module is initialized at subsys_initcall level when builtin.
FF-A drivers initialization is now changed to module_init level so that
pKVM ffa proxy is all setup and running in case pKVM hypervisor needs to
trap and handle FF-A calls.
One of the reason for not having this split from the beginning is the
need to workaround the FF-A v1.0 NULL UUID. The FF-A bus layer called
into FF-A driver and populated the device UUID if it matches with the
driver attempting to match. Moving the workaround away from the FF-A
bus layer to the FF-A core driver as a bus notifier will help to remove
the dependency.
* tag 'ffa-updates-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_ffa: Split bus and driver into distinct modules
firmware: arm_ffa: Move the FF-A v1.0 NULL UUID workaround to bus notifier
Link: https://lore.kernel.org/r/20240624103451.2870146-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/drivers
Arm SCMI driver updates for v6.11
The main addition this time is the support for platform to agent(p2a
also referred sometimes as notification or Rx) channel completion via
interrupt driven method. Currently, the OSPM agent clears or
acknowledge the receipt of the norification or delayed response by
updating the flags in the shared memory region which the platform is
expected to poll.
On some platforms that are completely interrupt driven, the OSPM
agent is expected to send a response message instead. This change
adds the support for the same.
Other changes include addition of a separate mailing list specific to
SCMI to allow open discussions about the interface itself in addition
to the kernel driver updates and support for system suspend via the
platform noification used on some systems.
* tag 'scmi-updates-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: Add support for platform to agent channel completion
dt-bindings: firmware: arm,scmi: Add support for notification completion channel
firmware: arm_scmi: Add support for system suspend in power control driver
MAINTAINERS: Add mailing list for SCMI drivers
Link: https://lore.kernel.org/r/20240620093924.375244-3-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add cmdq_pkt_logic_command to support math operation.
cmdq_pkt_logic_command can append logic command to the CMDQ packet,
ask GCE to execute a arithmetic calculate instruction,
such as add, subtract, multiply, AND, OR and NOT, etc.
Note that all arithmetic instructions are unsigned calculations.
If there are any overflows, GCE will sent the invalid IRQ to notify
CMDQ driver.
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
Link: https://lore.kernel.org/r/20240625083957.3540-1-jason-jh.lin@mediatek.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
When 9-bit alpha is enabled, its value will be converted from 0-255 to
0-256 (255 = not defined). This is designed for special HDR related
calculation, which should be disabled by default, otherwise, alpha
blending will not work correctly.
Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240620-9bit_alpha-v1-1-13c69daaf29f@mediatek.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
MT8188's MDP3 is able to use MDP_TCC0, this mutex_mod bit does
actually exist and it's the same as MT8195: add it to the table.
Fixes: 26bb17dae6fa ("soc: mediatek: mtk-mutex: Add support for MT8188 VPPSYS")
Reviewed-by: Fei Shao <fshao@chromium.org>
Link: https://lore.kernel.org/r/20240619103034.110377-1-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Commit 6f4429e21a7f ("soc/tegra: pmc: Update address mapping sequence
for PMC apertures") updated the resource lookup code in the PMC driver.
Instead of calling platform_get_resource_byname() and
devm_ioremap_resource() simplify the code by simply calling
devm_platform_ioremap_resource_byname().
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Add a helper function that allow regulator consumers to allow low-level
HW access, in order to enable/disable regulator in atomic context.
The use-case for RZ/G2L SoC is to enable VBUS selection register based
on vbus detection that happens in interrupt context.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/20240616105402.45211-4-biju.das.jz@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The multiple BWMONv4 instances available on the X1E80100 SoC use the
same interrupt number. Mark them are shared to allow for re-use across
instances.
Using IRQF_SHARED coupled with devm_request_threaded_irq implies that
the irq can still trigger during/after bwmon_remove due to other active
bwmon instances. Handle this race by relying on bwmon_disable to disable
the interrupt and coupled with explicit request/free irqs.
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240624092214.146935-4-quic_sibis@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Document X1E80100 BWMONs, which has multiple (one per cluster) BWMONv4
instances for the CPU->LLCC path and one BWMONv5 instance for LLCC->DDR
path.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Acked-by: Georgi Djakov <djakov@kernel.org>
Link: https://lore.kernel.org/r/20240624092214.146935-3-quic_sibis@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
required list
Remove opp-table from the required list as the bindings shouldn't care
where the OPP tables (referenced by the operating-points-v2 property)
comes from.
Suggested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Georgi Djakov <djakov@kernel.org>
Link: https://lore.kernel.org/r/20240624092214.146935-2-quic_sibis@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The i.MX8MP AudioMix reset controller is only present on Freescale i.MX8
SoCs. Hence add a dependency on ARCH_MXC, to prevent asking the user
about this driver when configuring a kernel without i.MX SoC support.
Fixes: fe125601d17cc1ea ("reset: imx8mp-audiomix: Add AudioMix Block Control reset driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/6d8116a56186fbf468229e823c7c8dfcd9488959.1719316665.git.geert+renesas@glider.be
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
EXPORT_SYMBOL_GPL() is missing for devm_qcom_tzmem_pool_new() which
causes build failures with randconfig. Add it and fix the issue.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202406250127.8Pl2kqFp-lkp@intel.com
Fixes: 84f5a7b67b61 ("firmware: qcom: add a dedicated TrustZone buffer allocator")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Elliot Berman <quic_eberman@quicinc.com>
Link: https://lore.kernel.org/r/20240624190615.36282-1-brgl@bgdev.pl
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
drivers-for-6.11
Merge the in-kernel protection-domain mapper implementation through a
feature branch, to allow sharing with the remoteproc tree.
|
|
Existing userspace protection domain mapper implementation has several
issue. It doesn't play well with CONFIG_EXTRA_FIRMWARE, it doesn't
reread JSON files if firmware location is changed (or if firmware was
not available at the time pd-mapper was started but the corresponding
directory is mounted later), etc.
Provide in-kernel service implementing protection domain mapping
required to work with several services, which are provided by the DSP
firmware.
This module is loaded automatically by the remoteproc drivers when
necessary via the symbol dependency. It uses a root node to match a
protection domains map for a particular board. It is not possible to
implement it as a 'driver' as there is no corresponding device.
Tested-by: Steev Klimaszewski <steev@kali.org>
Tested-by: Alexey Minnekhanov <alexeymin@postmarketos.org>
Reviewed-by: Chris Lew <quic_clew@quicinc.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240622-qcom-pd-mapper-v9-4-a84ee3591c8e@linaro.org
[bjorn: include linux/slab.h]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The ZynqMP reset driver can be compiled without ARCH_ZYNQMP being
enabled. Allow it to be built under COMPILE_TEST.
Acked-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/20240621-reset-compile-zynqmp-v1-1-ede43ab18101@pengutronix.de
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Add support for the resets on i.MX8MP Audio Block Control module,
which includes the EARC PHY software reset and EARC controller
software reset. The reset controller is created using the auxiliary
device framework and set up in the clock driver.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/1719200345-32006-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
With ARCH=arm64, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/firmware/meson/meson_sm.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240613-md-arm64-drivers-firmware-meson-v1-1-28e4138a8597@quicinc.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
Use devm_clk_get_enabled() to reduce a bit of boilerplate and to
disable the clock in case devm_reset_controller_register() fails.
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20240621-reset-devm-clk-get-enabled-v1-1-8408c7962b6c@pengutronix.de
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
The STIH407 reset driver can be compiled without ARCH_STI being
enabled. Allow it to be built under COMPILE_TEST.
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Link: https://lore.kernel.org/r/20240621-reset-compile-sti-v1-1-b7a66ce29911@pengutronix.de
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
The in-kernel PD mapper is going to use same message structures as the
QCOM_PDR_HELPERS module. Extract message marshalling data to separate
module that can be used by both PDR helpers and by PD mapper.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Tested-by: Alexey Minnekhanov <alexeymin@postmarketos.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240622-qcom-pd-mapper-v9-3-a84ee3591c8e@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
While parsing the domains list, start offsets from 0 rather than from
domains_read. The domains_read is equal to the total count of the
domains we have seen, while the domains list in the message starts from
offset 0.
Fixes: fbe639b44a82 ("soc: qcom: Introduce Protection Domain Restart helpers")
Tested-by: Steev Klimaszewski <steev@kali.org>
Tested-by: Alexey Minnekhanov <alexeymin@postmarketos.org>
Reviewed-by: Chris Lew <quic_clew@quicinc.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240622-qcom-pd-mapper-v9-2-a84ee3591c8e@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
If the service locator server is restarted fast enough, the PDR can
rewrite locator_addr fields concurrently. Protect them by placing
modification of those fields under the main pdr->lock.
Fixes: fbe639b44a82 ("soc: qcom: Introduce Protection Domain Restart helpers")
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Steev Klimaszewski <steev@kali.org>
Tested-by: Alexey Minnekhanov <alexeymin@postmarketos.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240622-qcom-pd-mapper-v9-1-a84ee3591c8e@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
|
|
The "memory protection" mechanism mentioned in the comment is the SHM
Bridge. This is also the reason why we do not convert this call to using
the TZ memory allocator.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sc8280xp-lenovo-thinkpad-x13s
Tested-by: Deepti Jaggi <quic_djaggi@quicinc.com> #sa8775p-ride
Reviewed-by: Elliot Berman <quic_eberman@quicinc.com>
Link: https://lore.kernel.org/r/20240527-shm-bridge-v10-13-ce7afaa58d3a@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Parse the "memory-region" property and - if present - use it to assign
the dedicated reserved memory to the underlying DMA callbacks which will
then allocate memory for the SCM calls from it.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Elliot Berman <quic_eberman@quicinc.com>
Link: https://lore.kernel.org/r/20240527-shm-bridge-v10-12-ce7afaa58d3a@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
SHM Bridge is a safety mechanism allowing to limit the amount of memory
shared between the kernel and the TrustZone to regions explicitly marked
as such.
Add a variant of the tzmem allocator that configures the memory pools as
SHM bridges. It also enables the SHM bridge globally so non-SHM bridge
memory will no longer work with SCM calls.
If enabled at build-time, it will still be checked for availability at
run-time. If the architecture doesn't support SHM Bridge, the allocator
will fall back to the generic mode.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sc8280xp-lenovo-thinkpad-x13s
Tested-by: Deepti Jaggi <quic_djaggi@quicinc.com> #sa8775p-ride
Reviewed-by: Elliot Berman <quic_eberman@quicinc.com>
Link: https://lore.kernel.org/r/20240527-shm-bridge-v10-11-ce7afaa58d3a@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
SHM Bridge is a safety mechanism allowing to limit the amount of memory
shared between the kernel and the TrustZone to regions explicitly marked
as such.
Add low-level primitives for enabling SHM bridge support as well as
creating and destroying SHM bridges to qcom-scm.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Andrew Halaney <ahalaney@redhat.com>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sc8280xp-lenovo-thinkpad-x13s
Tested-by: Deepti Jaggi <quic_djaggi@quicinc.com> #sa8775p-ride
Reviewed-by: Elliot Berman <quic_eberman@quicinc.com>
Link: https://lore.kernel.org/r/20240527-shm-bridge-v10-10-ce7afaa58d3a@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Drop the DMA mapping operations from qcom_scm_qseecom_app_send() and
convert all users of it in the qseecom module to using the TZ allocator
for creating SCM call buffers. As this is largely a module separate from
the SCM driver, let's use a separate memory pool. Set the initial size to
4K and - if we run out - add twice the current amount to the pool.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Elliot Berman <quic_eberman@quicinc.com>
Reviewed-by: Amirreza Zarrabi <quic_azarrabi@quicinc.com>
Link: https://lore.kernel.org/r/20240527-shm-bridge-v10-9-ce7afaa58d3a@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Let's use the new TZ memory allocator to obtain a buffer for this call
instead of manually kmalloc()ing it and then mapping to physical space.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Tested-by: Maximilian Luz <luzmaximilian@gmail.com>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sc8280xp-lenovo-thinkpad-x13s
Tested-by: Deepti Jaggi <quic_djaggi@quicinc.com> #sa8775p-ride
Reviewed-by: Elliot Berman <quic_eberman@quicinc.com>
Link: https://lore.kernel.org/r/20240527-shm-bridge-v10-8-ce7afaa58d3a@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Let's use the new TZ memory allocator to obtain a buffer for this call
instead of using dma_alloc_coherent().
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sc8280xp-lenovo-thinkpad-x13s
Tested-by: Deepti Jaggi <quic_djaggi@quicinc.com> #sa8775p-ride
Reviewed-by: Elliot Berman <quic_eberman@quicinc.com>
Link: https://lore.kernel.org/r/20240527-shm-bridge-v10-7-ce7afaa58d3a@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Let's use the new TZ memory allocator to obtain a buffer for this call
instead of using dma_alloc_coherent().
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sc8280xp-lenovo-thinkpad-x13s
Tested-by: Deepti Jaggi <quic_djaggi@quicinc.com> #sa8775p-ride
Reviewed-by: Elliot Berman <quic_eberman@quicinc.com>
Link: https://lore.kernel.org/r/20240527-shm-bridge-v10-6-ce7afaa58d3a@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Let's use the new TZ memory allocator to obtain a buffer for this call
instead of using dma_alloc_coherent().
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sc8280xp-lenovo-thinkpad-x13s
Tested-by: Deepti Jaggi <quic_djaggi@quicinc.com> #sa8775p-ride
Reviewed-by: Elliot Berman <quic_eberman@quicinc.com>
Link: https://lore.kernel.org/r/20240527-shm-bridge-v10-5-ce7afaa58d3a@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
We need to allocate, map and pass a buffer to the trustzone if we have
more than 4 arguments for a given SCM call. Let's use the new TrustZone
allocator for that memory and shrink the code in process.
As this code lives in a different compilation unit than the rest of the
SCM code, we need to provide a helper in the form of
qcom_scm_get_tzmem_pool() that allows the SMC low-level routines to
access the SCM memory pool.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sc8280xp-lenovo-thinkpad-x13s
Tested-by: Deepti Jaggi <quic_djaggi@quicinc.com> #sa8775p-ride
Reviewed-by: Elliot Berman <quic_eberman@quicinc.com>
Link: https://lore.kernel.org/r/20240527-shm-bridge-v10-4-ce7afaa58d3a@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Select the TrustZone memory allocator in Kconfig and create a pool of
memory shareable with the TrustZone when probing the SCM driver.
This will allow a gradual conversion of all relevant SCM calls to using
the dedicated allocator.
The policy used for the pool is "on-demand" and the initial size is 0
as - depending on the config - it's possible that no SCM calls needing
to allocate memory will be called. The sizes of possible allocations also
vary substiantially further warranting the "on-demand" approach.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sc8280xp-lenovo-thinkpad-x13s
Tested-by: Deepti Jaggi <quic_djaggi@quicinc.com> #sa8775p-ride
Reviewed-by: Elliot Berman <quic_eberman@quicinc.com>
Link: https://lore.kernel.org/r/20240527-shm-bridge-v10-3-ce7afaa58d3a@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
We have several SCM calls that require passing buffers to the TrustZone
on top of the SMC core which allocates memory for calls that require
more than 4 arguments.
Currently every user does their own thing which leads to code
duplication. Many users call dma_alloc_coherent() for every call which
is terribly unperformant (speed- and size-wise).
Provide a set of library functions for creating and managing pools of
memory which is suitable for sharing with the TrustZone, that is:
page-aligned, contiguous and non-cachable as well as provides a way of
mapping of kernel virtual addresses to physical space.
Make the allocator ready for extending with additional modes of operation
which will allow us to support the SHM bridge safety mechanism once all
users convert.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sc8280xp-lenovo-thinkpad-x13s
Tested-by: Deepti Jaggi <quic_djaggi@quicinc.com> #sa8775p-ride
Reviewed-by: Elliot Berman <quic_eberman@quicinc.com>
Link: https://lore.kernel.org/r/20240527-shm-bridge-v10-2-ce7afaa58d3a@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Document a new property (currently only for sa8775p) that describes the
memory region reserved for communicating with the TrustZone.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240527-shm-bridge-v10-1-ce7afaa58d3a@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"The core gains placeholders for recently added functions when
CONFIG_I2C is not defined as well documentation fixes to start using
inclusive terminology.
The drivers get paths in DT bindings fixed as well as proper interrupt
handling for the ocores driver"
* tag 'i2c-for-6.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
docs: i2c: summary: be clearer with 'controller/target' and 'adapter/client' pairs
docs: i2c: summary: document 'local' and 'remote' targets
docs: i2c: summary: document use of inclusive language
docs: i2c: summary: update speed mode description
docs: i2c: summary: update I2C specification link
docs: i2c: summary: start sentences consistently.
i2c: Add nop fwnode operations
i2c: ocores: set IACK bit after core is enabled
dt-bindings: i2c: google,cros-ec-i2c-tunnel: correct path to i2c-controller schema
dt-bindings: i2c: atmel,at91sam: correct path to i2c-controller schema
|
|
Pull smb client fixes from Steve French:
"Five smb3 client fixes
- three nets/fiolios cifs fixes
- fix typo in module parameters description
- fix incorrect swap warning"
* tag '6.10-rc4-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Move the 'pid' from the subreq to the req
cifs: Only pick a channel once per read request
cifs: Defer read completion
cifs: fix typo in module parameter enable_gcm_256
cifs: drop the incorrect assertion in cifs_swap_rw()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock fix from Mike Rapoport:
"Fix fragility in checks for unset node ID.
Use numa_valid_node() function to verify that nid is a valid node
ID instead of inconsistent comparisons with either NUMA_NO_NODE or
MAX_NUMNODES"
* tag 'fixes-2024-06-23' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
memblock: use numa_valid_node() helper to check for invalid node ID
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Thomas Bogendoerfer:
- fix lseek in o32 compat mode
- fix for microMIPS MT ASE helpers
* tag 'mips-fixes_6.10_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
mips: fix compat_sys_lseek syscall
MIPS: mipsmtregs: Fix target register for MFTC0
|
