summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2025-02-15media: hi556: Fix memory leak (on error) in hi556_check_hwcfg()Hans de Goede
Commit 7d968b5badfc ("media: hi556: Return -EPROBE_DEFER if no endpoint is found") moved the v4l2_fwnode_endpoint_alloc_parse() call in hi556_check_hwcfg() up, but it did not make the error-exit paths between the old and new call-site use "goto check_hwcfg_error;" to free the bus_cfg on errors. Add the missing "goto check_hwcfg_error;" statements to fix a memleak on early error-exits from hi556_check_hwcfg(). Fixes: 7d968b5badfc ("media: hi556: Return -EPROBE_DEFER if no endpoint is found") Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-02-15media: chips-media: wave5: Fix timeout while testing 10bit hevc flusterJackson.lee
The Wave5 521C variant does not support 10 bit decoding. When 10 bit decoding support was added for the 515 variant, a section of the code was removed which returned an error. This removal causes a timeout for the 521 variant, which was discovered during HEVC 10-bit decoding tests. Fixes: 143e7ab4d9a0 ("media: chips-media: wave5: support decoding HEVC Main10 profile") Cc: stable@vger.kernel.org Signed-off-by: Jackson.lee <jackson.lee@chipsnmedia.com> Signed-off-by: Nas Chung <nas.chung@chipsnmedia.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-02-15media: chips-media: wave5: Fix a hang after seekingJackson.lee
While seeking, the driver calls the flush command. Before the flush command is sent to the VPU, the driver should handle the display buffer flags and should get all decoded information from the VPU if the VCORE is running. Fixes: 9707a6254a8a ("media: chips-media: wave5: Add the v4l2 layer") Cc: stable@vger.kernel.org Signed-off-by: Jackson.lee <jackson.lee@chipsnmedia.com> Signed-off-by: Nas Chung <nas.chung@chipsnmedia.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-02-15media: chips-media: wave5: Avoid race condition in the interrupt handlerJackson.lee
In case of multiple active instances, new interrupts can occur as soon as the current interrupt is cleared. If the driver reads the instance_info after clearing the interrupt, then there is no guarantee, that the instance_info is still valid for the current interrupt. Read the instance_info register for each interrupt before clearing the interrupt. Fixes: ed7276ed2fd0 ("media: chips-media: wave5: Add hrtimer based polling support") Cc: stable@vger.kernel.org Signed-off-by: Jackson.lee <jackson.lee@chipsnmedia.com> Signed-off-by: Nas Chung <nas.chung@chipsnmedia.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-02-15media: chips-media: wave5: Fix gray color on screenJackson.lee
When a decoder instance is created, the W5_CMD_ERR_CONCEAL register should be initialized to 0. Otherwise, gray color is occasionally displayed on the screen while decoding. Fixes: 45d1a2b93277 ("media: chips-media: wave5: Add vpuapi layer") Cc: stable@vger.kernel.org Signed-off-by: Jackson.lee <jackson.lee@chipsnmedia.com> Signed-off-by: Nas Chung <nas.chung@chipsnmedia.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-02-13media: rc: add keymap for Siemens Gigaset RC20 remoteMichael Klein
Add keymap for the Siemens Gigaset RC20 remote (RC-5). Signed-off-by: Michael Klein <michael@fossekall.de> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-02-13media: streamzap: prevent processing IR data on URB failureMurad Masimov
If streamzap_callback() receives an urb with any non-critical error status, i.e. any error code other than -ECONNRESET, -ENOENT or -ESHUTDOWN, it will try to process IR data, ignoring a possible transfer failure. Make streamzap_callback() process IR data only when urb->status is 0. Move processing logic to a separate function to make code cleaner and more similar to the URB completion handlers in other RC drivers. Found by Linux Verification Center (linuxtesting.org) with Syzkaller. Fixes: 19770693c354 ("V4L/DVB: staging/lirc: add lirc_streamzap driver") Cc: stable@vger.kernel.org Signed-off-by: Murad Masimov <m.masimov@mt-integration.ru> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-02-13media: streamzap: fix race between device disconnection and urb callbackMurad Masimov
Syzkaller has reported a general protection fault at function ir_raw_event_store_with_filter(). This crash is caused by a NULL pointer dereference of dev->raw pointer, even though it is checked for NULL in the same function, which means there is a race condition. It occurs due to the incorrect order of actions in the streamzap_disconnect() function: rc_unregister_device() is called before usb_kill_urb(). The dev->raw pointer is freed and set to NULL in rc_unregister_device(), and only after that usb_kill_urb() waits for in-progress requests to finish. If rc_unregister_device() is called while streamzap_callback() handler is not finished, this can lead to accessing freed resources. Thus rc_unregister_device() should be called after usb_kill_urb(). Found by Linux Verification Center (linuxtesting.org) with Syzkaller. Fixes: 8e9e60640067 ("V4L/DVB: staging/lirc: port lirc_streamzap to ir-core") Cc: stable@vger.kernel.org Reported-by: syzbot+34008406ee9a31b13c73@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=34008406ee9a31b13c73 Signed-off-by: Murad Masimov <m.masimov@mt-integration.ru> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-02-12media: qcom: camss: add support for SDM670 camssRichard Acayan
The camera subsystem for the SDM670 the same as on SDM845 except with 3 CSIPHY ports instead of 4. Add support for the SDM670 camera subsystem. Signed-off-by: Richard Acayan <mailingradian@gmail.com> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-02-12dt-bindings: media: camss: Add qcom,sdm670-camssRichard Acayan
As found in the Pixel 3a, the Snapdragon 670 has a camera subsystem with 3 CSIDs and 3 VFEs (including 1 VFE lite). Add this camera subsystem to the bindings. Adapted from SC8280XP camera subsystem. Signed-off-by: Richard Acayan <mailingradian@gmail.com> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-02-07media: MAINTAINERS: add Qualcomm iris video accelerator driverDikshita Agarwal
Add an entry for the iris video decoder accelerator driver. Signed-off-by: Vikash Garodia <quic_vgarodia@quicinc.com> Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345) Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-02-07media: iris: enable video driver probe of SM8250 SoCDikshita Agarwal
Initialize the platform data and enable video driver probe of SM8250 SoC. Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345) Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-02-07media: iris: add check to allow sub states transitionsVedang Nagar
Based on the design of the state machine, add checks whether the transition from one sub-state to another is allowed. Signed-off-by: Vedang Nagar <quic_vnagar@quicinc.com> Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345) Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-02-07media: iris: implement power scaling for vpu2 and vpu3Vedang Nagar
Implement power scaling including a specific vpu2 and vpu3 calculation for clock and bus bandwidth, which depends on the hardware configuration, codec format, resolution and frame rate. Signed-off-by: Vedang Nagar <quic_vnagar@quicinc.com> Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345) Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-02-07media: iris: add check whether the video session is supported or notVedang Nagar
Based on the hardware capabilities, add a check during start_streaming and queue_setup, whether the video session is supported by the hardware. Signed-off-by: Vedang Nagar <quic_vnagar@quicinc.com> Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345) Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-02-07media: iris: add support for drain sequenceDikshita Agarwal
handle the V4L2_DEC_CMD_STOP by initiating a drain sequence on the firmware. Process and decode all OUTPUT buffers, that are queued by the client, before the VIDIOC_DECODER_CMD() was issued and mark the last buffer with the V4L2_BUF_FLAG_LAST flag. The decoder is stopped, after processing the last buffer. Resume the decoder when one of these operations are issued by the client: - V4L2_DEC_CMD_START - pair of VIDIOC_STREAMOFF() and VIDIOC_STREAMON() on the CAPTURE queue - pair of VIDIOC_STREAMOFF() and VIDIOC_STREAMON() on the OUTPUT queue Add the handling to resume decoding when client issues V4L2_DEC_CMD_START to resume decoding after a source change is detected. Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345) Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-02-07media: iris: handle streamoff/on from client in dynamic resolution changeDikshita Agarwal
The decoder is stopped after it completes the dynamic resolution change sequence. Handle VIDIOC_STREAMOFF() and VIDIOC_STREAMON() on the CAPTURE queue to resume the decoding process. Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345) Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-02-07media: iris: add support for dynamic resolution changeDikshita Agarwal
Handle the response sent by the firmware, when a source change is detected. Read the subscribed parameter to get the changed values. Raise the source change event to the client and update the instance sub-state. Mark the last buffer from before the source change with the V4L2_BUF_FLAG_LAST flag and return to the client. Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl> Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345) Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-02-07media: iris: implement vb2 ops for buf_queue and firmware responseDikshita Agarwal
Implement the vb2 ops for the buf queue. These are the different buffer attributes: BUF_ATTR_DEFERRED - buffer queued by the client but not submitted to firmware. BUF_ATTR_PENDING_RELEASE - buffers requested to be released from the firmware. BUF_ATTR_QUEUED - buffers submitted to the firmware. BUF_ATTR_DEQUEUED - buffers received from the firmware. BUF_ATTR_BUFFER_DONE - buffers sent back to vb2. Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl> Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345) Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-02-07media: iris: allocate, initialize and queue internal buffersDikshita Agarwal
Implement the functions for creating, queueing, releasing and destroying the buffers for internal usage. Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345) Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-02-07media: iris: subscribe parameters and properties to firmware for hfi_gen2Vedang Nagar
For hfi_gen2, subscribe different bitstream parameters on to firmware, to get notified of a change in any of the subscribed parameters. Signed-off-by: Vedang Nagar <quic_vnagar@quicinc.com> Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345) Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-02-07media: iris: implement set properties to firmware during streamonVedang Nagar
During the stream on operation, set some mandatory properties on the firmware to start a session. Set all v4l2 properties, which are set by the client, on to firmware, which is prepared with the dependency graph. Signed-off-by: Vedang Nagar <quic_vnagar@quicinc.com> Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345) Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-02-07media: iris: implement vb2 streaming opsDikshita Agarwal
During the stream on operation, send HFI_CMD_START on the capture and output planes to start processing on the respective planes. During the stream off operation, send HFI_CMD_STOP to the firmware, which is a synchronous command. After the response is received by the firmware, the session is closed on the firmware. Introduce different states for the instance and state transitions. IRIS_INST_INIT - video instance is opened. IRIS_INST_INPUT_STREAMING - stream on is completed on output plane. IRIS_INST_OUTPUT_STREAMING - stream on is completed on capture plane. IRIS_INST_STREAMING - stream on is completed on both output and capture planes. IRIS_INST_DEINIT - video instance is closed. IRIS_INST_ERROR - error state. | v ------------- +---------| INIT |--------- + | ------------- | | ^ ^ | | / \ | | / \ | | v v | | ----------- ----------- | | | INPUT OUTPUT | | |---| STREAMING STREAMING |---| | ----------- ----------- | | ^ ^ | | \ / | | \ / | | v v | | ------------- | |--------| STREAMING |-----------| | ------------- | | | | | | | | v | | ----------- | +-------->| DEINIT |<----------+ | ----------- | | | | | | | | v | | ---------- | +-------->| ERROR |<-----------+ ----------. Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl> Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345) Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-02-07media: iris: implement query_cap ioctlVedang Nagar
Implement the query_cap ioctl with the necessary hooks. Signed-off-by: Vedang Nagar <quic_vnagar@quicinc.com> Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl> Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345) Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-02-07media: iris: implement iris v4l2_ctrl_opsDikshita Agarwal
Initialize the control handler by reading the platform specific firmware capabilities. Capabilities are features, which are supported by a specific platform (SOC). Each capability is defined with a min, max, range and default value and a corresponding HFI. Implement s_ctrl and g_volatile_ctrl ctrl ops. Co-developed-by: Vedang Nagar <quic_vnagar@quicinc.com> Signed-off-by: Vedang Nagar <quic_vnagar@quicinc.com> Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl> Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345) Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-02-07media: iris: implement subscribe_event and unsubscribe_event ioctlsVedang Nagar
Implement the subscribe_event and unsubscribe_event iocts with the necessary hooks. Signed-off-by: Vedang Nagar <quic_vnagar@quicinc.com> Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl> Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345) Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-02-07media: iris: implement enum_fmt and enum_framesizes ioctlsVedang Nagar
Implement the enum_fmt and enum_framesizes ioctls with the necessary hooks. Signed-off-by: Vedang Nagar <quic_vnagar@quicinc.com> Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl> Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345) Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-02-07media: iris: implement g_selection ioctlVedang Nagar
Implement the g_selection ioctl op in the driver with the necessary hooks. Signed-off-by: Vedang Nagar <quic_vnagar@quicinc.com> Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl> Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345) Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-02-07media: iris: implement s_fmt, g_fmt and try_fmt ioctlsVedang Nagar
Implement the s_fmt, g_fmt and try_fmt ioctl ops with the necessary hooks. Signed-off-by: Vedang Nagar <quic_vnagar@quicinc.com> Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl> Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345) Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-02-07media: iris: implement reqbuf ioctl with vb2_queue_setupDikshita Agarwal
Implement the reqbuf IOCTL op and the vb2_queue_setup vb2 op in the driver with necessary hooks. Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl> Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345) Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-02-07media: iris: implement power managementDikshita Agarwal
Implement runtime power management for iris, including a platform specific power on/off sequence. Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345) Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-02-07media: iris: introduce host firmware interface with necessary hooksDikshita Agarwal
The Host firmware interface (HFI) is a well defined set of interfaces for the communication between the host driver and the firmware. The commands and responses are exchanged in form of packets. One or multiple packets are grouped under the packet header. Each packet has a packet type which describes the specific HFI and the payload, which holds the corresponding value for that HFI. Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345) Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-02-07media: iris: implement the boot sequence of the firmwareDikshita Agarwal
Set the memory region on the firmware and implement the boot sequence. Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345) Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-02-07media: iris: implement video firmware load/unloadDikshita Agarwal
Load/unload the firmware into/from memory via the MDT loader. The firmware is loaded as part of core initialization and unloaded as part of core de-initialization. Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345) Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-02-07media: iris: introduce iris core state management with shared queuesDikshita Agarwal
Introduce a core state management for iris driver with the necessary queues needed for the host firmware communication. There are 3 types of queues: Command queue - driver to write any command to firmware. Message queue - firmware to send any response to the driver. Debug queue - for the firmware to write debug messages. Initialize and configure the shared queues during probe. Different states for core: IRIS_CORE_DEINIT - default state. IRIS_CORE_INIT - core state with core initialized. FW loaded and HW brought out of reset, shared queues established between host driver and firmware. IRIS_CORE_ERROR - error state. ----------- | V ----------- | DEINIT | ----------- ^ / \ / \ / \ / \ v v ----------- ----------. | INIT |-->| ERROR | ----------- ----------. Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345) Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-02-07media: iris: implement iris v4l2 file opsDikshita Agarwal
Implement open, close and poll ops. Open: Configure the vb2 queue and v4l2 file handler. Allocate a video instance and add the instance to core instance list. Close: Free the instance and remove it from core instance list. Poll: Wait for an event on vb2 src and vb2 dst queues. Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl> Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345) Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-02-07media: iris: add platform driver for iris video deviceDikshita Agarwal
In preparation for adding H264 decode functionality, add the probe and remove functions and platform data to initialize iris resources, which are clocks, interconnects, power domains, reset clocks, and clock frequencies used for the iris hardware. Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl> Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345) Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-02-07dt-bindings: media: Add video support for QCOM SM8550 SoCDikshita Agarwal
Introduce support for Qualcomm new video acceleration hardware i.e. iris, used for video stream decoding and encoding on QCOM SM8550 SoC. Cc: devicetree@vger.kernel.org Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345) Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-02-06media: qcom: camss: Add support for VFE 780Depeng Shao
Add support for VFE found on SM8550 (Titan 780). This implementation is based on the titan 480 implementation. It supports the normal and lite VFE. Co-developed-by: Yongsheng Li <quic_yon@quicinc.com> Signed-off-by: Yongsheng Li <quic_yon@quicinc.com> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Depeng Shao <quic_depengs@quicinc.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-02-06media: qcom: camss: Add CSID 780 supportDepeng Shao
The CSID in sm8550 is version 780, it has new register offset and new functionality. The buf done irq, register update and reset are moved to CSID 780. Co-developed-by: Yongsheng Li <quic_yon@quicinc.com> Signed-off-by: Yongsheng Li <quic_yon@quicinc.com> Signed-off-by: Depeng Shao <quic_depengs@quicinc.com> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-02-06media: qcom: camss: csiphy-3ph: Add Gen2 v2.1.2 two-phase MIPI CSI-2 DPHY ↵Depeng Shao
support Add a PHY configuration sequence and PHY resource for the sm8550 which uses a Qualcomm Gen 2 version 2.1.2 CSI-2 PHY. The PHY can be configured as two phase or three phase in C-PHY or D-PHY mode. This configuration supports two-phase D-PHY mode. Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Depeng Shao <quic_depengs@quicinc.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-02-06media: qcom: camss: Add sm8550 compatibleDepeng Shao
Add CAMSS_8550 enum, sm8550 compatible and sm8550 camss drvier private data, the private data just include some basic information now, later changes will enumerate with csiphy, csid and vfe resources. Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Depeng Shao <quic_depengs@quicinc.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-02-06dt-bindings: media: camss: Add qcom,sm8550-camss bindingDepeng Shao
Add bindings for qcom,sm8550-camss in order to support the camera subsystem for sm8550. Co-developed-by: Yongsheng Li <quic_yon@quicinc.com> Signed-off-by: Yongsheng Li <quic_yon@quicinc.com> Signed-off-by: Depeng Shao <quic_depengs@quicinc.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-02-06media: qcom: camss: csid: Only add TPG v4l2 ctrl if TPG hardware is availableDepeng Shao
There is no CSID TPG on some SoCs, so the v4l2 ctrl in CSID driver shouldn't be registered. Checking the supported TPG modes to indicate if the TPG hardware exists or not and only registering v4l2 ctrl for CSID only when the TPG hardware is present. Signed-off-by: Depeng Shao <quic_depengs@quicinc.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-02-06media: qcom: camss: Add default case in vfe_src_pad_codeDepeng Shao
Add a default case in vfe_src_pad_code to get rid of a compile warning if a new hw enum is added. Signed-off-by: Depeng Shao <quic_depengs@quicinc.com> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-02-06media: qcom: camss: Add callback API for RUP update and buf doneDepeng Shao
The RUP registers and buf done irq are moved from the IFE to CSID register block on recent CAMSS implementations. Add callbacks structure to wrapper the location change with minimum logic disruption. Co-developed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Depeng Shao <quic_depengs@quicinc.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-02-06media: qcom: camss: vfe: Move common code into vfe coreDepeng Shao
Some v4l2 buffer related logic functions can be moved to vfe core as common code, then the vfe driver of different hw version can reuse them, this also can avoid adding duplicate code for new version supporting. Suggested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Depeng Shao <quic_depengs@quicinc.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-02-06media: qcom: camss: csid: Move common code into csid coreDepeng Shao
The get hw version and src pad code functions can be common code in csid core file, then the csid driver of different hw version can reuse them, rather than adding duplicate code in csid driver for each version. Suggested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Depeng Shao <quic_depengs@quicinc.com> Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-02-06media: qcom: camss: csiphy-3ph: Use an offset variable to find common ↵Bryan O'Donoghue
control regs New versions of the CSIPHY locate the control registers at offset 0x1000 not offset 0x800. Provide a variable to base an offset from for the purposes of redirecting the base offset for the new PHY regs layout. The existing setup bases from 0x800, the new from 0x1000 with some of the 'EXT' registers dropped but the lower-order lane config regs at offset 0x00 and up the same as before. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Depeng Shao <quic_depengs@quicinc.com> Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-02-06media: qcom: camss: csiphy-3ph: Move CSIPHY variables to data field inside ↵Bryan O'Donoghue
csiphy struct A .data field in the csiphy device structure allows us to extend out the register layout of the three phase capable CSIPHY layer. Move the existing lane configuration structure to an encapsulating structure -> struct csiphy_device_regs which is derived from the .data field populated at PHY init time, as opposed to calculated at lane configuration. Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Depeng Shao <quic_depengs@quicinc.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
generated by cgit (git 2.34.1) at 2025-09-11 03:41:41 +0000